OIINJECTED ROTARY SCRE S G /G 7/G /G /G (2 k / hp)
ATAS COPCO ORDIDE Atlas Copco, based in Stockholm, Sweden and founded in 18, is an industrial group with a worldleading position in compressors, construction and mining equipment, power tools and assembly systems. Atlas Copco provides optimized compressed air solutions through sustainable productivity. Builtin reliability Rugged screw compressor technology for a 0% continuous duty cycle. Up to 6 C ambient temperature conditions thanks to the selection of robust components. Electro pneumatically operated inlet valve for stable running and a long life time. NE G SERIES: SCRE S BUIT TO AST Atlas Copco compressors have always set the standard for reliability and performance in the compressed air industry. ith the new G, G 7, G and G, Atlas Copco brings the power and durability of an industrial screw compressor to any type of small or medium sized industry. Easy installation ireless concept. Multiple variants (floor and tank mounted, with or without integrated dryer) for full flexibility. Minimum footprint and cooling air discharge from the top allows placement against the wall or in a corner. Simple & quick maintenance Patented cooler for easy cleaning and maintenance. Grouped service points accessible through the removable panel. Spinon oil separator and filter.
G /G 7/G /G /G A ROBUST MUTIPE OFFER Atlas Copco s G compressors bring you outstanding sustainability, reliability and performance, while minimizing the total cost of ownership. This range provides you with the compressed air solution that perfectly matches your requirements with clear value propositions. Built to perform even in the harshest environments, these compressors keep your production running efficiently. Integrated quality air solutions The integrated dryer avoids condensation and corrosion in the network. Optional filters for air quality up to class 1 level (<0.01 ppm). Standard included waterseparator. Additional energy savings with the dryer s noloss mechanic drain. 1 Robust element & motor The G s compression element, the most used in its size. 2% higher efficiency with Vbelt compared to other beltdriven systems on the G 2. Geardriven drive train on G for unequaled reliability and limited maintenance. 2 Advanced monitoring Stateoftheart monitoring using a simple Ethernet connection. Service and warning indications, error detection and compressor shutdown. Optional Elektronikon graphic controller for further enhanced remote monitoring features and service time indications. 5 igh tech oil vessel Protection from oil contamination: extremely low oil carryover thanks to the vertical design of the oil vessel. Extremely low losses of compressed air during load/unload cycle thanks to minimized oil vessel size. Easy installation A true plugandplay solution, ideal machine for installation companies and OEMs. Easy transportation by forklift. Remarkably compact footprint.
TECNICA SPECIFICATIONS G /G 7/G /G /G z Max. working pressure Pressure variant Installed motor power Capacity FAD* eight Noise level** Pack Floor Pack Tank FF Tank bar(e) psi l/s m/min cfm k hp db(a) 2.2 61 1 9 192 2 G2.0.0 0.2 G.0 5. 0.2.2 61 1 9 19 G.0 7.8 0.7 16.5 5.5 62 1 86 195 G5.0.0 0. 21.2 5.5 6 178 198 9. 1. 19.0 1.1.2.0 16.9 1.01 5.8.0.1 0.79 27.7 9 2 1. 61.6 G7 G G G 18 G G G G G G TECNICA SPECIFICATIONS G /G 7/G /G /G z Max. working pressure Pressure variant Installed motor power Capacity FAD* eight Noise level** Pack Floor Pack Tank FF Tank bar(e) psi l/s m/min cfm k hp db(a) 7. 1. 0 19.0 1.1.2 0.8 7 16.9 1.01 5.8 1.1 0.79 27.7 0 7 2 1. 61.6 26.6 1. 56. 0.8 7 2. 1.6 51.5 1.0 1. 2. 0 7 2.58 91.0 26.6 1. 56..0 2. 1.6 51.5.0.0 1. 2. 9.7 2.62 92.6.0 2. 8.7.0 6.1 2.17.5 G7 G 2. 82.7 0.8 7.9 2.09.9 1.1 1.81 6.8 0 7 51.6.09 9.2 1 9.7 2.7 96.7 1 9 0.8 7 2.9 2.57 90.9 1 9 G G18.0.5 1.8 6.6 1.2 2.2 78.7 1 9 9 52.5. 1.2 1 9 0 7 59.7.58 126..2.01 6. 1 9 56.0.6 8.6 G.0.5 2.61 92.1 1 9 0.8 7 51.7. 9..0.2 2.2 78.8 1 9 1.0 2.70 95. 9.2.61 12 0 7 90.1 5.1 190.8 58...5 8.1 5.05 178.1 G.0 51.7. 9.5 0.8 7.1.6 16..0.0 2.70 95. 0 7 6.2 6.97 26.1 6.8 6.1 6.2 0.8 7 96. 5.78.2 9 90.0 5. 190.6 86. 5.18 18.0.0 79.8.79 169.0 9.5 6.87 22.5 6. 6.8 2..0 98.7 5.92 9.0 9.7 7.96 281.1 126.7 7. 2..0 7.0 7.02 27.8 9 1.7.00 5.1 7.0 9.2 2.5.5.5 2 16. 8.78 9.9 0 7 8.8 8. 29.0 127.9 7. 270.9 0.8 7 8.1 7.09 0.1 0 7 17..6 6. 9.26 26.9 0.8 7 11.6 0 0.0 0 7.1. 7.6 0 12 0.2 12.01 2.9 0 12 0.8 7..6 0.8 0 12 9.0.26.1 0 12 7.2 12. 8.8 0 12.5.5 2 187.6.26 97. 0 12 (mm) (mm) (mm) 7 62 9 : Not available. * Unit performance measured according to ISO 1217, Annex C, latest edition. ** Mean sound level according to ISO21, tolerance db(a). Pack floormounted G 7 G G 02 0 G 10 870 16 G 16 990 1870 G G G : Not available. * Unit performance measured according to ISO 1217, Annex C, latest edition. ** Mean sound level according to ISO21, tolerance db(a). TAIORED TO YOUR NEEDS Some applications may need or may benefit from additional options and more refined control and air treatment systems. To meet these needs, Atlas Copco has developed options and easily integrated compatible equipment providing the lowest cost compressed air. Pack tankmounted G 5 1280 G 7 00 62 1 G 1858 0 1801 G Pack Tank G 2 G G G Upgrade to graphic controller Tropical thermostat 1280 UD+ filter Full Feature tankmounted Pack Floor G 7 G 7 5 G 7 00 62 1 DD filter G 1858 0 1801 Timing drain valve Oversized air tank Oversized cooler ater separator and drain device Energy saving box : Optional FF Tank G 2 : Not available
COMMITTED TO SUSTAIBE PRODUCTIVITY e stand by our responsibilities towards our customers, towards the environment and the people around us. e make performance stand the test of time. This is what we call Sustainable Productivity. www.atlascopco.com 295 08 2 16, Atlas Copco Airpower NV, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.