Pins Universal Ball Coupler Locks Lip Engaging Ball Coupler Locks Total Encasement Ball Coupler Locks Ball Coupler Latch Locks Ball Mount/Receiver Hitch Locks - Barbell Style Ball Mount/Receiver Hitch Locks - Bent Pin Style eyed Alike Lock Sets Lunette Eye/Draw Bar Locks ing Pin Locks Gooseneck Coupler Locks Spare Tire Locks Outboard Motor Lock Trailer Wheel Locks Hidden Shackle Locks Shielded Padlock Cable Locks Anchor Shackles, Quick Links & Hooks Chain Safety Cable Anchor Safety Cable Lever and Ratchet Binders Load Binder Chain Pan Fittings with Rings Surface Mounted Rope Ring Flush Mount Bolt-On D-Ring Forged D-Ring E-Track Logistic Track Fittings Series E or A Decking/Shoring Beam Weld-On Webbing Portable Webbing Lashing Webbing Winch Standard Winch Straps Winch Bar & Slider Track Ratchet Tie Down & Tie-Down Straps Heavy-Duty Cam Buckle Straps E-Track Ratchet Straps Wheel Tiedowns Ratchet Straps Ratchet Buckles Stake Pockets Slam Locks Heavy-Duty Aluminum Door Holdback Rack Connector Set Spring Latches Door Latch it Door Handles Door Handle Cam 1
558 176DAT 11 180 180 7017 181 181 1810 1800 66000 (Lynch Pin/Click Pin) 1805 1819 66100 6605 (Wire Lock Pin) C B C B D A A 558 560 719 176DAT 11 116 118 Bent Pin w/hairpin Clip 180 180 1807 181 181 Pin Diameter Usable Length " 5 8" " 5 8" 5 8" & bent pin w/stainless sleeve Hairpin Clip Pin Diameter 8" 5 8" Detent Pin with Chain Pin Diameter 9 16" 5 8" 5 8" Overall Length 1 16" 9 16" " Usable Length ¼" Detent Pin (No Chain) Pin Diameter 1805 9 16" 181 1815 Safety Spring Pin Pin Diameter 5 8" Safety Spring PTO Pin Pin Diameter 5 16" 8" Usable Length Usable Length 8" Usable Length ¼" ¼" Wire Lock Pin w/chain Pin Diameter 1810 ¼" Usable Length 1 1800 5 16" ¼" 66000 6600 66006 Ring Hitch Pin w/hairpin Clip Pin Diameter 1819 66100 181 66105 66110 66115 6610 6615 Lynch Pin/Click Pin.5".19".1" 5 8" 5 8" ¾" ¾" 7 8" 1" 1.75" 1.8" 1.75" 1.50" 1.10" 1." Pin w/ring, Chain & Lynch Pin Usable Length ¼" ¼" 6¼" ¼" 6¼" 6¼" 6¼" Wire Lock Pin (No Chain) 6605 66050 6605 66056 66060 6606 66066 A Dia.Width Pin Diameter 1805 9 16" A Dia.Width 16" ¼" 5 16" 8" 8" ¼" ¼" B Usage Length 1 5 8" 1 1 16" 7 16" 1 17 " 17 " " B Usage Length C Loop Clearance 1 9 16" 1 1¾" 1 17 " 1 7 6" 1 1 16" 1 C Loop Clearance Usable Length D Pin Length 1 1 16" " 5 " 1 5 5" 9 6" ¼"
Blaylock EZ Lock Made in the USA of heavy grade aircraft aluminum and will not rust. Features a ¾" steel locking pin, for use with the heavy-duty shielded padlock (not included). TL TL0 TL TL0 Universal Ball Coupler Locks Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock fits most couplers with, or without a lip around the ball cavity. SECTION Fits trigger style couplers (Fulton, Shelby, D&L ), Atwood rolled lip and helmet style. UFP couplers and actuators and many others. Made in the USA. (Padlock not included. Order lock #0DAT separately.) Fits all Hammerblow Bulldog forged 1 7 8", " and 5 16" trailer couplers and similar styles. (Padlock not included. Order lock #0DAT separately.) UTL100 UTL100 UTL100- Universal trailer coupler lock, fits most 1 7 8", " & 5 16" couplers Replacement key precut - Special Order 79ATPY 79DAT 79DAT 79ATPY Fits 1 7 8", ", and 5 16" couplers manufactured by Reese, Fulton, Valley, Atwood, Shelby, Putnam, HammerBlow, Dutton Lainson & UFP. Advanced locking mechanism resists picking and prying. Commercial version - rekeyable. Dark gray or black finish. The cylinder plug in the #79ATPY uses the Python cylinder mechanism but the plug cannot be interchanged with other Python cylinders. 98-98-1 98 Universal trailer coupler lock, fits most 1 7 8", " & 5 16" couplers 98- Side 1 = 1 Groove Replacement key - Blank (1 pair) { Side = Grooves Side 1 = Grooves 98-1 Replacement key - Blank (1 pair) { Side = 1 Groove UMAX100 UMAX50 UMAX100 UMAX50 Premium UNIVERSAL 60 of Solid Hardened Steel dual action coupler lock (Fits ALL couplers) UNIVERSAL Die-Cast Dual purpose coupler lock (Fits ALL couplers)
Lip Engaging Ball Coupler Locks Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock engages the lip around the ball cavity, and has a locking mechanism that extends into the ball cavity to prevent removal. SECTION Blaylock EZ Lock Made in the USA of heavy grade aircraft aluminum and will not rust. Heavy duty one-piece lock with a 7 8" steel pin and push lock. Constructed with extra large crown to house tumbler. Locks and unlocks from the front. TL8 TL6 TL 1111 111 111-A 111 111-A 111- Fits most 1 7 8" and " trigger-style couplers with flat lip flange around ball cavity. Fits heavy duty " couplers with flat lip flange around ball cavity. Fits heavy duty " and 5 16" couplers with rolled lip flange around ball cavity. Bolt Pattern Fits most 1 7 8" stamped couplers Fits most " stamped couplers " eyed Alike Fits most 5 16" stamped couplers 5 16" eyed Alike Replacement key precut - Special Order Lip Engaging Ball Coupler Locks Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock engages the lip around the ball cavity to prevent removal. 77DAT 77A Fits 1 7 8" & " couplers with flat flange around ball cavity Adjusts to fit many makes and models Same as #77DAT, but keyed alike 77DAT 78DAT 78ADAT Fits 5 16" couplers with flat flange around ball cavity Adjusts to fit many makes and models Same as #78DAT, but keyed alike 78DAT 79DAT Lock Sets contains one each: #79-1 7 8" & " Coupler Cavity Lock #87 - Coupler Latch Lock 9 " x 7 8" Pin #85 - Receiver Lock fits both 5 8" (16mm) & (1mm) receiver holes; (6mm) long shackle Heavy-duty nylon zippered carrying case Total Encasement Ball Coupler Locks Note TL TL Secures trailers when parked, by covering the ball cavity to prevent towing. Fits " Bulldog Forged Style Fits 5 16" Bulldog Forged Style
567 Ball Coupler Latch Locks Secures trailers when parked or in tow by preventing operation of the ball latch. Pin Diameter Usable Length 567 ¼" 556 Pin Diameter Usable Length 556 ¼" 7 8" 566 Pin Diameter Usable Length 566 ¼" " Pin Diameter Usable Length 578 578 ¼" 175DAT 175DAT Pin Diameter Usable Length 9 " 7 8" 171DAT 171DAT 9 " Pin Diameter Usable Length 1115 ¼" ¾" LL10 Fits coupler latches up to 5 8" wide. Also use on trailer door latches, storage units or cargo & toolboxes. Stainless steel construction with patented ball-bearing locking system. O-rings inside and rubber cap keep out moisture and dirt. Lifetime warranty. 605DAT 87DATSC 605DAT 87DATSC Solid brass body with ¾" opening 9 " case hardened steel shackle Stainless steel, adjustable coupler latch lock 5
Ball Mount/Receiver Hitch Locks - Barbell Style Secures ball mounts and hitch mounted accessories like bike racks and cargo carriers. Pin Diameter x Usable Length 568-1 x 1 5 8" For Class I and Class II hitches with 1¼" square tubes * Can be ordered keyed alike for an additional charge Pin Diameter x Usable Length 568 x ¾" For Class I and Class II hitches with 1¼" square tubes * Can be ordered keyed alike for an additional charge TS 180DAT Fits both 5 8" (16mm) & (1mm) receiver holes (6mm) long shackle; eyed different Stainless steel; Fits 5 8" (16mm) receiver holes; (6mm) long shackle TS 180A eyed Alike Stainless steel; Fits 5 8" (16mm) receiver holes; (6mm) long shackle 180DAT Pin Diameter x Usable Length LL100 5 8" x Stainless Steel; Lifetime Warranty; For Class III and IV hitches with " square tubes Pin Diameter x Usable Length 5 8" x 11 16" 569 For Class III and IV hitches with " square tubes Pin Diameter x Usable Length 5 8" x 11 16" 569-1 For Class III and IV hitches with " square tubes * Can be ordered keyed alike for an additional charge Pin Diameter x Usable Length 9 5 8" x ¾" For Class III and IV hitches with " square tubes 9 9 5 8" x " For Class V hitches with square tube 9 Pin Diameter x Usable Length 5 8" x 8" 90 For Rapid Hitch ball platform 6
Ball Mount/Receiver Hitch Locks - Bent Pin Style Pin Diameter x Usable Length 570 x " For Class I and Class II hitches with 1¼" square tubes Pin Diameter x Usable Length 571 5 8" x 5 8" For Class III, IV and V hitches with " and square tubes. Includes plastic lock cover. Pin Diameter x Usable Length 75DAT 5 8" x " Fits Class III and IV hitches with " square tubes Pin Diameter x Usable Length MAG00 5 8" x ¼" Combination lock (no keys required), Fits Class III and IV hitches with " square tubes. Resettable combination. Rubber cover protects lock mechanism. Pin Diameter x Usable Length 601 5 8" x ¾" J-pin lock. Fits Class III and IV with " square tubes and additional 17 " hole in receiver tube eyed Alike Lock Sets Pin Diameter x Usable Length 57 ¼" x 7 8" & 5 8 " x 11 16" Includes coupler latch and receiver hitch locks, keyed alike. Pin Diameter x Usable Length 181DAT 9 " & 5 8" Includes coupler latch and receiver hitch locks, keyed alike. Pin Diameter x Usable Length LL105 ¼" x 11 16" & 5 8" x Stainless steel; Lifetime warranty; Includes coupler latch and receiver hitch locks, keyed alike. 7
eyed Alike Lock Sets (Continued) Pin Diameter x Usable Length 91 5 8" x ¾" & 5 8" x 8" For Rapid Hitch ball platform and " square receiver hitch 9 5 8" x ¼" & 5 8" x 8" For Rapid Hitch ball platform and square receiver hitch 79DAT Lock Sets contains one each: #79-1 7 8" & " Coupler Cavity Lock #87 - Coupler Latch Lock 9 " x 7 8" Pin #85 - Receiver Lock fits both 5 8" (16mm) & (1mm) receiver holes; (6mm) long shackle Heavy-duty nylon zippered carrying case 79DAT 57 TL60 Lock Sets contains one each: #79DAT Coupler Lock - For use when not trailer is not hooked up. #866DAT Trailer Hitch Lock fits both 1¼" x 1¼" and " x " trailer hitches. #87DAT Trailer Stainless Steel Coupler Latch Lock - For use when trailer is in tow. Heavy duty nylon zippered carrying case Lunette Eye/Draw Bar Locks Fits and " ID lunette eyes. Requires standard padlock (NOT Included). Zinc plated Fits and " ID lunette eyes. Requires padlock (NOT Included). Aluminum construction with ¾" steel pin. Made in the USA. (Order #0DAT lock separately) ing Pin Locks 6007 " standard king pins; Built-in lock cylinder TL70 Requires padlock (NOT Included). Aluminum construction with ¾" steel pin. Made in the USA. (Order #0DAT lock separately) 8
Gooseneck Coupler Locks TL50 TL50 Precision-made of aircraft aluminum and will not rust. It features a ¾" heavy-duty steel locking pin. Fits Hammerblow, Stallion, Superior and T.E.M Gooseneck style couplers. (Padlock not included. Order lock #0DAT separately.) TL51 For use with Model TL-50. Secures the adjustable top part of coupler by covering bolt. Fits all gooseneck style round or square tube designs. (Padlock not included. Order lock #0DAT separately.) TL5 Deluxe Gooseneck Combo. #TL-5 consists of #TL-50 & TL-51. (Padlock not included. Order two locks #0DAT separately.) TL5 Deluxe Gooseneck Combo. #TL-5 consists of #TL-50, TL-51 and two #0ADPF large padlocks in one convenient package. 508 Spare Tire Locks Protect your rear-mounted spare tire against theft with this solid steel chrome-plated tire lock. Replaces one of the mounting bracket lug bolts to secure tire to carrier. Pickproof lock screws into shaft, adjusts from ¼" - 7 8" length. Includes keys. 50 Heavy 7 16" u-bolt secures tire on tongue or frame up to " wide. Holds or 5 lug wheels. Will fit 8" thru 1" and most 15" wheels. Adjustable threaded brackets will hold padlock for security. Overall length 8¾". Thread length ". Zinc plated. Display packaged. 6DAT Solid zinc and steel construction; Chrome plated for corrosion resistance Locks over wheel studs up to 9 16" (1mm) diameter; For use only on non-operating spare tire 0DSPT Outboard Motor Lock Brass construction offers maximum corrosion resistance; Hardened steel tube with a laminated brass lock body; Marine brass shackle; Vinyl covered for maximum corrosion resistance; Locks outboard motors up to 0 hp 9
TWL100 Trailer Wheel Locks The TWL100 Trimax Wheel Lock brings provides maximum security for trailers, cars, trucks, boats, construction equipment, ATVs and Xs. Fits 10" to 18" wheels Extremely visible deterrent Easy installation. Includes all tools and complete instructions Heavy gauge steel disc covers lug nuts to prevent tire removal Clamps tight to tire for added security Rugged epoxy powder coat finish prevents rust 90510 90510-A Heavy-duty Hardened steel construction with case hardened steelrod. Prevent wheel rotation eyed alike Trailer eeper Ideal for fleet trailers EZ00 EZ0 Easy to use - installs and removes in just seconds Lock is recessed into handle for greater security Heavy-duty plastic covers to protect rims Fits most 15" 05, 15, F78, H78 wheels Will fit some 1" and 1" wheels Fits most tires up to 9¼" wide Includes ½-0 locking lug nuts for added security Opens to 9 wide New, larger size to fit todays larger trailer wheels/tires Easy to use - installs and removes in just seconds Lock is recessed into handle for greater security Heavy-duty plastic covers to protect rims Starts where the EZ00 leasves off Fits most 15" to 0" wheels Will fit some 1" and 1" wheels Fits most tires up to 10¾" wide Includes ½-0 locking lug nuts for added security Opens to 10 7 8" wide 10
SLH100 970DPF 970DPF 671A eyed Alike SLH100 Hidden Shackle Locks 7 8" wide hardened steel body Protected shackle prevents prying, cutting and sawing Removable cylinder for replacement or repining Solid Steel Hasp for use with 970 style locks; 9" (cm)w x (11cm)h DL-80 DL-80 Heavy-duty aircraft aluminum - will not rust. Convenient push-button lock. Hardened plated steel pin. Perimeter gasket to eliminate scratching and vibration noise. Covers the keeper hole used with regular padlocks. Covers the bolt head at the top and bottom for added security. Can be used vertical or horizontal. Pull ring for easy pin removal. 0DAT 0ADPF eyed Alike Shielded Padlock ¾" (70mm) wide stainless steel body resists corrosion Hardened steel shackle for extra cut resistance Double deadbolt locking to guard against pulling ey retaining feature ensures padlock is not left unlocked Fully shielded shackle protects against bolt cutter attacks 7A 8119DPF Amored hardened steel shackle defies cutting 1 9 16" (0mm) laminated steel body for superior strength -pin tumbler cylinder helps prevent picking Shackle guard protects against bolt cutters and hacksaws Cable Locks 5' (1.5m), 8" (10mm) diameter cable Flexible braided steel cables for strong cut resistance Combination locking mechanisms for keyless convenience Set-your-own combination for convenience and security Protective coating helps prevent scratching and rusting 8 6' (1.8m) x 8" (10mm) Adjustable Locking Cable-D Cable Size 557 5 16" Usable Length 10 ft. 61DAT 6' (1.8mm), ¼" (6mm) diameter, steel cable No.11 covered brass 1 9 16" (0mm) lock for corrosion resistance 6' cable length will accommodate most tires & general applications 11
SECTION WLL: Working Load Limit is the maximum load (in pounds) which should ever be applied to any assembly, when the assembly is new and the load is uniformly applied in direct tension to a straight, untwisted assembly. MBS: Minimum Breaking Strength is the minimum force required to cause the chain, accessory, or assembly to fail or become distorted and no longer usable. This figure should be used to determine the breaking strength of an item. Anchor Shackle Clevis Slip Hook Grab Hook Safety Snap Hook Quick Link Snap Hook S-Hook S-Hook w/safety Latch All safety ratio ratings (WLL) are the maximum safe load which the assembly should be subject to at any time. 860 861 86 86 86 865 Chain Size 16" ¼" 5 16" 8" 7 16" Anchor Shackle (Galvanized) Pin Diameter ¼" 5 16" 8" 7 16" 5 8" WLL 667 lbs 1,000 lbs 1,500 lbs,000 lbs,000 lbs,000 lbs Drop forged 105 steel. Hot galvanized and load rated. For joining welded chain attachments. Meets Federal Specs. #RR-C-71B, Type, Class 1.Pin=10 Alloy Clevis Slip Hook w/safety Latch System High Test (Zinc Plated) Fits Chain Size Pin Diameter WLL 866 867 868 869 870 ¼" 5 16" 8" 5 8".8".".7".6".7" 1,950 lbs,875 lbs,000 lbs 6,500 lbs 8,000 lbs Drop forged carbon steel hook, heat treated. For use with System Proof Coil or System High Test. Slip hooks have a lower Working Load Limit than the same type/size chain or grab hook. Grab Hook System 7 Transport Grade (Zinc Plated) Fits Chain Size Pin Diameter WLL 8 8 85 86 ¼" 5 16" 8".8".".7".6",600 lbs 5,00 lbs 7,500 lbs 1,700 lbs Drop forged, carbon steel hook, heat treated. Use w/system Proof Coil or System High Test. Safety Snap Hook Eye ID WLL Finish 81 11 16",000 lbs Zinc Quick Link (Zinc Plated) Trade Size Material Dia. WLL 89 850 851 85 85 85 16" ¼" 5 16" 8" 7 16".195" (5mm).5" (6mm).1" (8mm).50" (9mm).95" (10mm).75" (1mm) 610 lbs 880 lbs 1,50 lbs 1,980 lbs,00 lbs,00 lbs Fast, easy connection for permanent or temporary attachment. Use with low carbon chain only. Snap Hook (Zinc Plated) Fits Chain Size Pin Diameter WLL 879 880 881 88 88 16" ¼" 5 16" 8".195" (5mm).5" (6mm).05" (8mm).5" (9mm).65" (1mm) 105 lbs 95 lbs 507 lbs 771 lbs 905 lbs Fast, easy connection for permanent or temporary attachment. Use with low carbon chain only. S-Hook (Zinc Plated) Size Class WLL 87 8" I 750 lbs 88 7 16" II 1,50 lbs 855 17 " III 1,900 lbs Heated treated, medium carbon steel. Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled. S-Hook w/safety Latch Size Class WLL 87 88 89 8" 7 16" 17 " I II III 750 lbs 1,50 lbs 1,900 lbs Heated treated, medium carbon steel. Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled. 1
Definition: Safety Chains are the flexible tension members connected from the front portion of the towed vehicle to the rear portion of the towing vehicle. Their purpose is to retain connection between towed and towing vehicle in the event of failure of the ball, socket, coupler, or hitch. Specification: See Figure 1 Trailer Classification Class 1 Class Class Class ** Minimum Longitudinal Load, Tension, Pounds (See Figures and ) Each Safety,000,500 5,000 MGTW Each of Two chain Attaching Means,000,500 5,000 MGTW Approximate Diameter of steel in link /16" 1/" 5/16" /8 to 7/16" Fig. 1 Safety Chain Specifications *Load shown shall be applied in the same manner as would prevail if the trailer were being towed by the safety chain in a straight ahead direction. Safety chain, when formed, fastened or rigged as on the vehicles, shall withstand load shown without breaking. Local marking, denting or gouging of the chain attaching means at the points of safety chain contact shall not be considered excessive distortion. The intent is that the chain attaching means shall have sufficient strength to break the safety chain consistently. ** MGTW means the Maximum Gross Trailer Weight, pounds which is to be towed. Attaching Means: Safety chains must be connected to the front of the trailer or tongue, not to the coupler, by bolts or other devices. The minimum strength of these devices, including those which attach to the towing vehicle, must be equal to the maximum Gross Trailer Weight. No welding, torching, or machining operation shall be performed on the chain by the installer or the operator to attach it to the trailer. Connecting Methods: Review the illustrations, Figure, Typical Single Safety Chain Installation, and Figure, Typical Double Safety Chain Installation, both the single and double chains must be crossed under the tongue. They must be oriented in such a manner as to prevent the tongue from dropping to the ground in the event of failure to the hitch, coupler or ball. The chains must be connected to the towing vehicle as that the slack for each length of chain, between the trailer and the towing vehicle, is the same and must have no more slack when in use than is necessary to permit proper turning of the vehicles. The forward end of the chain must be attached to the towing vehicle, not to the ball but to the hitch or other frame member. The chain must be looped around the member and hooked back into itself. Fig. Typical Single Safety Chain Installation SECTION Fig. Typical Double Safety Chain Installation Chain - Proof Coil Grade 0 (Bulk Chain is ordered per foot) 105 106 107 108 5 5 6 7 Class Rating I I II II III III 16" Zinc Plated Grade 0 Proof Coil Chain ¼" Zinc Plated Grade 0 Proof Coil Chain 5 16" Zinc Plated Grade 0 Proof Coil Chain 8" Zinc Plated Grade 0 Proof Coil Chain Chain Size x Length 16" x 8" 16" x 5" ¼" x 8" ¼" x 5" 5 16" x 8" 5 16" x 5" WLL 750 lbs 1,50 lbs 1,900 lbs,650 lbs S-Hook w/safety Latch 9 Chain Size x Length 8" x 5" Safety Chain Anchor Steel Rod Chain Anchor - Secure Safety Chains to Trailer Frames SC8B SC50B SC58B 0 1 89DATSC 6 7 Capacity 15 Safety Chain Mounting Bracket - 8" x " Safety Chain Mounting Bracket - x 6" Safety Chain Mounting Bracket - 5 8" x 8¼" Safety Cable Sold in Pairs (Vinyl Coated) Class Rating I II III III IV V Stretch Out Length " 6" 6" 0" 6" 6" Forged Slip Hook 1 Hook 8" 8" 7 16" 7 16" 1
WLL: Working Load Limit is the maximum load (in pounds) which should ever be applied to any assembly, when the assembly is new and the load is uniformly applied in direct tension to a straight, untwisted assembly. All safety ratio ratings (WLL) are the maximum safe load which the assembly should be subject to at any time. Lever Binders Chain Size WLL 675 676 Lever Chain Binder Lever Chain Binder Ratchet Binders ¼" - 5 16",600 lbs 5,00 lbs Chain Size WLL 678 Ratchet Chain Binder 5 16" - 8" 5,00 lbs 679 Ratchet Chain Binder 5 16" - 8" 8" - 9,00 lbs Load Binder Chain Made from high carbon steel to provide greater tensile strength Chain Size WLL 5 Grade High Test 8" x 0' 5,00 lbs 5 Grade 70 Transport Chain 8" x 0' 6,600 lbs Tie-Down Assembly Usage Chart: This chart is provided as a guide to meet the basic mini-mum current in service requirements of the FMCSA and the DOT published Sept 7, 00. The following table lists the minimum number of chain assemblies required to secure a load per DOT & CVSA. This chart is only to be used as a reference. Chain Grade Alloy S8 - G80 Size 5/16 /8 Net weight of cargo to be secured in lbs: 0,000 5,000 0,000 5,000 0,000 5,000 50,000 Due to elongation characteristics S-8 Alloy chain is not recommend for Transport tie-down or cargo securement. *Many factors affect proper method of cargo securement including the cargo to be secured and the length of the cargo. Refer to the most recent revision of The Department of Transportation (DOT) Title 9 regulations for more complete requirements regarding the proper methods and number of tiedowns required. FMCSA: Federal Motor Carrier Safety Admin DOT: Department of Transportation CVSA: The Commercial Vehicle Safety Alliance Transport S7 - G70 High Test S - G Proof Coil S - G0 1/ 5/16 /8 1/ 1/ 5/16 /8 1/ 5/16 /8 1 5 5 6 6 7 5 Due to low working load limits, S- Proof coil is not recommend for Transport tie- down or cargo securement. 7 5 8 6 8 5 9 6 5 8 6 10 7 5 1
DIA. Pan Fittings w/rings 600- DIA. ¼ ¼ 600 Recessed Floor Ring; 5,000 lbs Break Strength 600- Recessed Ring with #801BP Packing Plate & Mounting Hardware ½ MOUNTING SURFACE ¼ 6½ ¼ 6½ ؽ 801BP Back Support Plate for #600 Ø.8 ¼ DIA. C SUN ¼ DIA. ½ 5 600 Recessed Floor Ring Requires " Dia. Ring 1,00 lbs Break Strength 1.5 1.9.6 Ø.8 1.156 Ø.5 Ø.5 R.6 6018 Surface Mounted or Recessed Recessed Rope Ring with Plastic Bezel 600 lbs Break Strength ½ ½ Surface Mounted Rope Ring. 6016 Surface Mounted Pan with ¼" Dia. Ring. 800 lbs Break Strength. Zinc Plated 1 DIA. Flush Mount 1 DIA. ¼ DIA. RING 6017 Zinc Finish Standard Steel/Plastic Construction 15
Bolt-On D-Ring w/attachment Clips WLL ¼" Welded D-Ring w/bolt-on Clip 6006 00 lbs 1,00 lbs Break Strength 1 1 ¼ DIA. 1½ DIA. X Forged D-Ring w/weld-on Clips WLL Forged D-Ring Assembly w/bolt-on Clip 6009,000 lbs 1,000 lbs Break Strength ½ ½ WLL Forged 6001 5 8" D-Ring Assembly w/weld-on Clip 6,00 lbs 19,000 lbs Break Strength 5 5 WLL Forged 1" D-Ring Assembly w/weld-on Clip (Long) 600 15,600 lbs 7,000 lbs Break Strength 6 5 WLL 7115 8" x 1 7 8" x 1 8" Tiedown Weld-on U-Bolt - 711 8" x 1 5 8" x Tiedown Weld-on U-Bolt - 1 16
E-Track Straps Binder End Fittings Length Capacity 87 88 Ratchet Ratchet E Clips E Clips 1' 16' 1,500 lbs 1,500 lbs 501 50 Ratchet Over Center Cam E Clips E Clips 0' 1' 1,500 lbs 1,500 lbs WLL 7 Rope Tie Off w/springloaded E-Clip -10" 6,000 lbs Logistic Track Fittings MBS WLL 99 E-Track Clip w/" D-Ring,000 lbs 1,500 lbs MBS WLL 500 E-Track Clip w/ring 6,000 lbs,000 lbs Series E or A Decking/Shoring Beam 90 Wood Beam Socket (The rate capacity varies depending on lumber quality) 1.00 (5).95 (16) 0. (11) 0.8 (7).00 (51) 89 Series E Track 10 ft. Section of E-Track - Horizontal Mount 1- Gauge - Coated Steel 17
6 Weld-On Webbing Short - Side Mount Weld-on 6 60 6 Standard - Under Mount Weld-on Deep - Storable Under Mount Weld-on / Slider Weld-On are designed to be permanently mounted to the trailer frame in a fixed position. Slider can be located anywhere along the length of the slider track & will lock into position when tension is applied to the strap assembly. 60 Portable Webbing 6 Standard Under Mount Portable with Set Screws Portable Webbing provide a great deal of flexibility during application because they can be located anywhere along the outer rail channel, as long as they do not interfere with any other trailer components when the trailer is loaded or unloaded. 6 Lashing Webbing Winch 61 " Lashing - Right Hand WLL,5 lbs Standard Winch Straps Ratchet Capacity 66 67 69 686 68 60 685 " x 15' with Snap Hook " x 7' with Flat Hook " x 7' with D-Ring " x 7' with Flat Hook " x 7', 0m Webbing, Flat Hook " x 0', 0m Webbing, Flat Hook " x 7' with Delta Ring Winch Bar & Slider Track 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs Flat Hook D-Ring Delta Ring Snap Hook 65 Chrome nurled Combination Winch Bar 65 Winch Bars feature knurling for both hands creating a slip resistant handle for safety. The winch bar tip shall be inserted through both holes in the winches end cap. Standard Winch Bars should never be used for tightening Chain Binders. 19000 Slider Winch Track - ¼" formed steel; 7" length 19000 18
Ratchet Tie Down 98 98 1" wide strap with vinyl coated double J hooks adjustable from' to 15' and has a painted ratchet & cadmium plated gears.1,500 lbs. 96 76 96 80 76 1" strap features nylon web, rubber coated " metal hooks. A ratchet buckle for the ultimate in tightness.15' Long. 1" nylon strap with rubber coated hooks & ratchet. 1,500 lbs load capacity. 15' long. pack in retail clamshell. 1" nylon strap with rubber coated hooks & ratchet. 1,500 lbs load capacity. 6' long. pack. 5591 Tie-Down Straps 5591 Over-center lock transom tie-down strap; " x '; Sold in pairs WLL 77 79 Heavy-Duty Cam Buckle Straps 1" Strap, 5.5' Long; 1" Vinyl Coated S-Hook; 1 Pair 1" Strap, 15' Long; 1" Vinyl Coated S-Hook 00 WLL lbs 00 lbs E-Track Ratchet Straps Capacity 87 " Wide, 1' Length; E-Clip (End Fittings); Yellow 1,500 lbs 88 501 " Wide, 16' Length; E-Clip (End Fittings); Grey " Wide, 0' Length; E-Clip (End Fittings); Blue Wheel Tiedowns (Ratchet Sold Separately) 651-1 Fits 1" Standard Tire and Wheel Tiedown;1 Pair 651-15 Fits 15" Standard Tire and Wheel Tiedown;1 Pair 651-16 Fits 16" Standard Tire and Wheel Tiedown;1 Pair 651-R Ratchet only for Wheel Tiedowns - Sold Individually 1,500 lbs 1,500 lbs 19
Long Handle Ratchet Strap Ratchet Capacity 68 " x 7', Flat Hook 15,000 lbs 657 Extra Long Wide Handle Ratchet Strap " x 15', Snap Hook Ratchet Capacity 10,000 lbs 659 " x 15', Flat Hook 10,000 lbs 655 66 " x 7', Flat Hook 10,000 lbs " x 15', Snap Hook - Replacement Strap Only - NO Ratchet 689 67 " x 15', Flat Hook - Replacement Strap Only - NO Ratchet " x 7', Flat Hook - Replacement Strap Only - NO Ratchet 67 Ratchet Capacity 68 " x 7'; Double J wire hooks 10,000 lbs 688 " x 7'; Double J replacement strap only - No Ratchet Ratchet Buckles 651-R " Standard Handle Ratchet; 11,000 lbs. Break Strength 65 " Extra Long Wide Handle Ratchet; 11,000 lbs. Break Strength 0
8015 8017 Stake Pockets Size 1 5 8 x ID " High, Weld-on Pre-punched to attach with or 7 16" bolts. Hot Dipped Galvanized Slam Locks Hole Size Lockable 805 8" x 5 8" Yes 806 8" x 5 8" No Mounting Holes No No Finish Rustproof Steel Rustproof Steel 808 807 808 807 ¾" x ¾" ¾" x ¾" Yes Yes No Yes Rustproof Steel Stainless Steel 80 Replacement Cylinder and ey for #805 Latch DH0 Heavy-Duty Aluminum Door Holdback Heavy-duty, die cast aluminum construction; " hook length; eeper features spring-loaded latch mechanism Rack Connector Set Straight Stake LEFT RIGHT 801 7" overall length, 11 " holes, formed from x 16" stock One set consists of pieces: (1) L.H. pair and (1) R.H. pair LEFT RIGHT 80 Corner Stake 8" overall length to inside of angle with 11 " holes formed from x 16" stock One set consists of pieces: (1) L.H. pair and (1) R.H. pair 1
L595 Spring Latches pin extends 1" past bracket 1 x 1¼" mounting pattern for ¼" bolts Note Spring loaded bolt can be locked in the open position. Turning lever allows the bolt to close under spring pressure. Zinc plated bolt, housing and keeper. 07 For boat, snowmobile, or utility trailers that tilt. Holds tilt bed securely while towing. Zinc plated handle, spring, and latch for maximum corrosion resistance. Unassembled. ¼" -way Plunger Weld-on Reverse Handle Upper Lug Cam Door Latch it 010 010-1 010- Zinc Plated Cam Action Door Latch it (¾" pipe NOT included) Hasp Only Handle Only hasp handle 00 01 Door Handles L type door handle; Chrome plated handles rotate full 60 Can be locked in positions spaced 90 apart Shaft is standard 5 16" square C-C of mounting hole 1 T Type door handle; Outside surface mount; Chrome plated; Full 60 rotation; 5 16" square shaft 1 center to center mounting holes; Can be locked in positions spaced 90 apart Note: Door Handle Cam Must Be Ordered Separately Lower Lug Cam 01 00 Door Handle Cam 0 " Door handle cam; Zinc plated steel with set screw to secure to 5 16" shaft. For use with #00 and 01