620 Cockpit/Handlebar/Bracket Africa Twin Windscreen Highscreen for the Africa-Twin. Better wind and weather protection. - Simple to fit. - Lightly tinted. 041-0001 (1996 and newer) 041-0005 (1990-1995) Windscreen Spoiler Spoilers offer optimum wind deflection and protection without much effort. The spoiler is simply mounted on top of existing windscreen. The spoiler can be positioned at different angles and is secured in place with a strap. The spoiler screen is made from macrolon. The mounting mechanism is made from machined aluminium. Note: only for original windscreen of the Honda RD07 040-1340 Headlight Cover Highest protection for the lamp glass against flying stones, manufactured from macrolon: rugged, non-breakable, shatter-proof. The headlight cover is nearly invisible and does not compromise the looks. Installation: Easy to mount using existing screw holes; comes supplied with necessary screws and mounting hardware. The headlight cover has not been type approved by the German TÜV and must not be used on public roads. Africa-Twin RD07A 1997 and newer. 040-0381 Africa-Twin RD07 from 1997 onwards 040-0384 Africa-Twin RD07 1993-1996 Headlight Protector Steel 1997 and newer Mounting is very simple using fastening points directly at the indicator mounts. The headlight protector does not have German TÜVtype approval and was developed for off-road use. 040-0385
Fairing, Handlebar Africa Twin 621 Touratech Hand Protectors - Optimum lever protection (brake and clutch levers) - Robust even at high speeds - Good wind deflection (with spoiler) - Elegant design enhances the enduro looks - Hand protector and spoiler colours can be combined freely - Includes mounting kit and fitting instructions - Hand protector colours: black (1), white (5), red (4), yellow (2,) blue (3), - Spoiler (colour impregnated plastic) available in black (1), white (5), red (4), yellow (2), blue (3) When ordering, please substitute the X on the end of the order number for the number in brackets 040-719X Hand protectors steel handlebar 040-679X Hand protectors aluminum handlebar Spoiler for Touratech Hand Protectors GD 040-730X NEW Illustration similar Handlebar conversion kit The standard Africa Twin has a simple steel handlebar. Apart from the fact that, after the first fall, the handlebar is bent and can no longer be used, it s shape is not ideal. To solve this problem we offer you the extremely rugged, cone- shaped WPR Pro Bar medium handlebar which has stood numerous tests. Special clamps (included) complete the conversion. The WRP handlebar is ideal for enduro and rallye events and due to its shape it is less tiring on wrists and arms and does not affect endurance. 041-0901 Handlebar Risers - For an upright and relaxed riding position - Less strain on shoulders and wrists - For sport bikes: Better standing, less exhaustive riding - Better handling - Polished aluminium, 25 mm higher 040-0267 Illustration similar
622 Crashbars Even falling off the stand can damage the tank and fairing of the Africa Twin. When riding, a fall can cause even more damage. To solve this problem, there are very rugged engine bars available for the that wrap around the fairing. - Steel tube with black plastic coating. - Rigid construction also available for the 43 l tank. - Optimum protection. - Comes in two pieces. - Can also be used with our tank bags. 051-0514 RD07 1993-2002 051-0515 RD07 for 43 litres tank Pic.: Nina & Tom Wyssenbach Iceland
Africa Twin 623 Those among you riding a on longer trips can hardly understand why the seat does not offer more comfort. After a short time, the joy of riding gives way to the pains of a sore back. We could not live with this any longer and have developed two different seats for the Africa Twin that suit the needs of long-distance riders. Double Seat The twin seat features a modified dished out seating platform. The black seat cover looks good and prevents the rider from sliding forward and backward. Simply replace the original seat with our sport seat. It comes supplied with all fittings. Colour: black 055-2094 Only RD07 1993 and newer
624 Xenon Auxiliary Headlight (left side) State-of-the-art lighting technology for your Africa Twin. Very bright Xenon light for considerably safer driving at night. The Xenon light is activated by the high beam and provides much more light. The 20,000 volt transformer uses only 35W to produce double the light. Includes German TÜV Type Approval, special brackets for the light and for the transformer, complete fitting hardware and detailed fitting instructions. All Touratech s Xenon control units are protected from strong vibrations! 040-1508 Fog Headlight RD07 The fog headlight can be fitted as a single light, or in a pair. The wide, low fog beam of the 55W halogen allows much safer driving when it is raining or snowing. The fog light housing matches our Xenon headlight. 040-2008 right side 040-3008 left side 43 Litres Tank We have also developed a tank for the Honda Africa Twin RD07 that suits the needs of Twin bikers. High- quality workmanship is of paramount importance. Therefore, we only use the most modern materials and production methods. The tank is produced in accordance with the latest findings in vehicle and rallye technolgy. - 43 l capacity - Material: Polyamide 6 - Ready to be painted in any colour (high-quality surface finish) - Optimum design - two fuel taps (supplied) - Original tank cap is retained - Nearly indestructable - No modifications to original fairing - No modifications to motorcycle - Rotoformed - Relatively lightweight (approx. 8.5 kg) - Made in Germany - Original seat can be retained. 100-0016 Öhlins Shock Absorbers Öhlins shock absorbers are highly recommen-dable. They will considerably improve your bike s suspension characteristics (the front and rear installations must be properly matched with each other). All Öhlins shock absorbers function according to the de Carbon principle. The reason why Öhlins shock absorbers work so well is no secret! It s their precision! 040-0415
Lighting, Tank, Seat, Suspension Africa Twin 625 Touratech Suspension Honda Adventure Bikes Information on Touratech suspension and available variants can be found starting on page 615! NEW Hyperpro progressive replacement springs for fork and shock absorber, Honda XRV 750 Africa Twin RD07 *from 1993* Full set by Hyperpro, the Dutch specialist for suspension products. The set includes replacement fork springs and a replacement spring for the shock absorber. The progressive springs have been designed to match the Honda XRV 750 Africa Twin RD07 perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. Replacing the front and rear springs will lead to a significant improvement in your suspension system. 040-7432 Hyperpro progressive replacement fork springs, Honda XRV750 Africa Twin RD07 1993> 040-7415 RD07 1993>
626 Chainguard RD07 - Laser-cut Aluminium - Lightweight - Uses original mounting points - Screws included - Silver amodised - Sporty look - Very simple to install 040-1400 NEW Manifold Cover (only RD 07) Practical and lightweight heat protection, protects boots and trouser. Simply looks great. 042-0101 Pivot Pegz *Mark3*, Honda XR (96 -), AfricaTwin (88-02), Transalp (- 99) Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road. 040-5503 Rallye Footpegs These footpegs have proved to be reliable at our rallye events. They offer considerably wider foot base support and also allow increased comfort and longer distances to be covered while standing on the footpegs. These footpegs also provide more grip as the grip studs have very sharp edges. 041-0603 Kaoko Cruise Control, mechanical cruise control, Honda Africs Twin RD 07 The original by the South African inventor! The Kaoko Cruise Control replaces the original handlebar end weights. The anti-slip knurled screw secures the accelerator in position. Thanks to the continuous adjustment, the accelerator can also be fix. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Used at the owner s/rider s own risk. 330-0008
Gear Lever (All Years) Lightweight, stylish, folding aluminium gear lever for your Africa Twin. It is also ideal for bigger feet. 041-0707 Footpegs, Wheels, Tail Rack Bag Africa Twin 627 Rear Brake Calliper Cover (only RD 07) Finally a true protection for the rear brake disc. Now the expensive brake disc will be well protected when riding off-road. 042-0102 Stainless steel brake lines 040-0329 rear to 1995 040-0327 rear from 1996 040-0315 front Excel Rims with Set of spokes Honda Afrika Twin RD07 Front wheel 53,34 x 4,7cm (21 x 1,85 ) / 36 041-0500 Rear wheel 43,18 x 7,62cm (17 x 2,5 ) / 32 041-0501 (Hub, rear sprocket and brake discs are not included in scope of delivery) Scope of delivery: - Excel rim *black* - Stainless steel spokes - Matching spoke nipples Tail Rack Bag Honda Afrika Twin This versatile tail rack bag for the offers 13 litres of carrying capacity. It is tailored to the small tail rack and fixed to the rack hooks using four straps. An additional strap holds the tail rack bag in place when carrying high loads. The bag features a closed- cell foam base for non- slip, limpet attachment. A circular zip expands the bag to approx. 22 litres of capacity. Size: approx. 35 cm x 25 cm x 15 cm, expands to approx. 35 cm x 25 cm x 25 cm Made of Teflon-coated CORDURA, therefore waterrepellent and dirt-resistant. 055-1205 Water protected
628 055-0069 Tank Bag Honda Afrika Twin Water protected The further development of our proven tank bag now offers an additional reflective elastic strap on the side which can be used to hold e.g. your gloves during a short stop. Reinforcements in the side walls keep the tank bag absolutely in shape even when not full. The further details: - Capacity approx. 18 litres, expandable to approx. 25 litres by opening the zipper - Two new side pockets with 2-way zippers and optimised form. This prevents accidental actuation of the turn flashers or horn when turning the handlebar. - Sturdy carrying handle - Two straps supplied with the bag allow it to be used as a rucksack - Map pocket (28 x 32 cm) attached to the bag by Velcro fasteners - Attached to the tank by snap closures for quick removal during refuelling - Optional rain cover available. Colour: black Size: (L x W x H): approx. 31 x 29 x 22/32 cm 055-1302 Tank bag 055-0069 Rain cover Water protected Tank Bag VP 45 Afrika Twin / Varadero / XL650V Transalp The proven VP 45 tank bag, now with a new top section! Along with a volume of about 25 litres (reducable to about 18 litres), it features reinforced sides and two outer pockets toward the back with two-way zips. This arrangement prevents accidental actuation of the horn or indicators when turning the handlebars. Another new feature is the reflective elastic strap on the side for securing gloves, kidney belts or ski masks. The map pocket is sized for A4 (28 x 32 cm) and can be removed. The bag includes two carry straps to allow the tank bag to be used as a knapsack or shoulder bag. A sturdy handle makes it easy to carry off the bike, and an optional rain cover with a transparent pocket (055-0069) is also available. The upper section is attached to the base plate with a stable zip closure, and the ergonomically designed side pockets can be attached on the left and right. These provide an additional 10 litres of storage for a total volume of 45 litres. Made of Teflon-coated CORDURA which is both waterrepellent and dirt-resistant. Made in Germany by KAHEDO. Colour: black Size (l x w x h): approx. 31 x 29 x 22/32 cm 055-1063 Tank bag 055-0069 Rain cover
Wheels, Tank Bags, Aluminium Pannier Systems Africa Twin 629 NEW ZEGA Pro pannier system AND-S/AND-Black The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. ZEGA Pro ZEGA Pro AND-S ZEGA Pro AND-Black 31/38 litres 052-3541 052-3543 052-3545 38/45 litres 052-3542 052-3544 052-3546 99 cm 38 31 107 cm 45 38 Alu And-S And-Black