K Shapes 01 02 03 LB Housing Black ray Terminals Silver Solder Lug/ Quick Connect Terminals 01 TYPICAL INDICATOR ORDERIN EXAPLE DESCRIPTION FOR TYPICAL ORDERIN EXAPLE Clear Cap with Red Diffuser Incandescent Lamp Used with Solid Cap 05 5-volt 12 12-volt 5C 5D 5F Silver Solder Lug/ Quick Connect Terminals 6B 6F 6 Bright LED Used with LED Cap Colors Red Amber reen Super Bright LED Used with LED Cap White reen Blue Lamps Incandescent or Neon Used with Insert Cap 01 110-volt Neon 05 5-volt Incandescent 12 12-volt Incandescent No Code LB01-5C12- Resistor 05 5-volt No Resistor 12 12-volt 24 24-volt 5C 12 Red, 12-volt, Bright LED Shape and ray Housing Solid Cap: Lens/Filter Colors BJ CJ EJ FJ J Cap Types & Colors White/Clear Red/Clear Yellow/Clear reen/clear Blue/Clear LED Cap: Lens/Diffuser Colors LED Cap: Lens/Diffuser Colors Clear/Red Clear/Amber Clear/reen Insert Cap: Lens/Filter Colors JE * *J Clear/Red Clear/Yellow Clear/reen Clear/Blue * & J not suitable with neon. 14
LB Indicators 01 Housing AT607 (15.8mm) (16.2) Sq.638 Silver Solder Lug/ (2.8mm) Quick Connect SHAPES & PANEL CUTOUTS 02 K.854 (21.7mm) (1.5) R.059 (22.0) Dia.866 (11.5).453 Panel Thickness:.039 ~.157 (1.0 ~ 4.0mm) Black HOUSIN TERINALS Epoxy Seal 03 (2.0).079 (1.2).047 x.866 (15.8mm x 22.0mm) ray (22.4).882 Thk = (0.5) Voltage V 5V AC 12V AC Current I 115mA 60mA Endurance Hours 10,000 average Ambient Temp. Range LAP CODES & SPECIFICATIONS Incandescent Lamp for Solid Colored and Colored Insert Caps Voltage V 110V AC Current I 1.5mA Endurance Hours 10,000 average Ambient Temp. Range Neon Lamp for Colored Insert Cap AT607N 01 25 C ~ +50 C (16.2).638 05 12 25 C ~ +50 C Recommended Resistors: 33K ohms for 110V AC; 100K ohms for 220V AC The electrical specifications shown are determined at a basic temperature of 25 C. 15
AT635 LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25 C. Polarity marks are on the device. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Additional lamp detail is shown in the Accessories & Hardware section. LEDs are colored in OFF state. 5-volt AT625 Blue AT631B White AT632F reen T-1 1 2 Bi-pin Color Codes Bright LED without Resistor aximum Forward Current I F 30mA 30mA 30mA 20mA 20mA 20mA 1.9V 2.0V 2.1V aximum Reverse Voltage V R 5V 5V 5V 0.42mA/ C 0.42mA/ C 0.42mA/ C Color Codes: 12-volt 5C 5D 5F Bright LED No Code 24-volt Resistor Codes (+) No Resistor aximum Forward Current I F 52mA 26mA 13mA 5V 12V 24V aximum Reverse Voltage V R 4V 8V 16V 0.50mA/ C 5C 5D 5F 05 12 24 Super Bright Single Element LED ATTENTION ELECTROSTATIC SENSITIVE DEVICES Color White reen Blue aximum Forward Current I F 30mA 30mA 30mA 20mA 20mA 20mA 3.3V 3.3V 3.3V aximum Reverse Voltage V R 7V 7V 7V 0.40mA/ C 0.40mA/ C 0.40mA/ C 6B 6F 6 (-) 16
LB Indicators Lens/Filter BJ CJ EJ FJ J Lens/Filter JE and J not suitable with neon lamp. AT476 CAP TYPES & COLOR COBINATIONS Color Codes: B White C Red D Amber E Yellow F reen Blue J Clear J Lens/Diffuser Lens/Diffuser AT4176 AT4162 AT477 Solid Cap for Incandescent Lamp AT4012 aterial: Polycarbonate AT4013 aterial: Polycarbonate Insert Cap for Incandescent or Neon Lamp AT4178 aterial: Polycarbonate Cap for Bright LED without Resistor Cap for Bright LED AT4164 (5.5 aterial: Polycarbonate AT4026 AT4027 AT4177 AT4163 Translucent Colored Lens Transparent Clear Filter Lamp AT607 Translucent Colored Filter Lamp AT607 or 607N Translucent Colored Diffuser Bright LED AT635 Translucent Colored Diffuser Bright LED 17
aterial: Polycarbonate Clear Lens White Diffuser LB01K-12-CJ LB02K-12-CJ LB03K-12-CJ (17.8).701 AT4129 CAP TYPES & COLOR COBINATIONS Cap for Super Bright LEDs AT4128 AT4130 TYPICAL INDICATOR DIENSIONS (17.8) Sq.701 (23.7) Dia.933 (24.0).945.126.126 (21.5).846 (22.5).886 (21.5).126.846 (21.7) Dia.854 Transparent Clear Lens Translucent White Diffuser LEDs AT625 AT631 AT632 (22.0).866 (15.8) Sq (15.8) Sq (15.8) 18