SCHÜTZ UNDERFLOOR HEATING SYSTEMS PRICE LIST

SCHÜTZ UNDERFLOOR HEATING SYSTEMS PRICE LIST Valid from January 2018

Overview of the field service. Germany 1 Marco Kunstmann Rantzauallee 50 D-23611 Bad Schwartau Phone +49 (0) 451/8 81 92 41 Fax +49 (0) 451/8 80 46 67 Mobil +49 (0) 151/61 31 26 29 marco.kunstmann@schuetz.net 2 Frank Reiners Mohnblumenweg 20 D-28832 Achim Phone +49 (0) 42 02/7 55 54 Fax +49 (0) 42 02/97 92 26 Mobil +49 (0) 160/7 41 50 20 frank.reiners@schuetz.net 3 Jörg Hellriegel Lange Straße 34a D-16348 Basdorf Phone +49 (0) 3 33 97/6 22 46 Fax +49 (0) 3 33 97/6 22 46 Mobil +49 (0) 171/3 08 03 45 joerg.hellriegel@schuetz.net 5 Martin Bannas Zu den Buchen 1 D-56269 Marienhausen Phone +49 (0) 26 89/92 97 28 Fax +49 (0) 26 89/92 97 27 Mobil +49 (0) 170/7 98 03 08 martin.bannas@schuetz.net 7 Dirk Zuckarelli Lindenweg 3 D-65582 Hambach Phone +49 (0) 64 32/98 84 50 Fax +49 (0) 64 32/98 84 51 Mobil +49 (0) 160/96 32 35 33 dirk.zuckarelli@schuetz.net 6 Gunter Clemenz Siedlung 7 D-01809 Dohna Phone +49 (0) 35 29/51 86 18 Fax +49 (0) 35 29/51 86 17 Mobil +49 (0) 172/7 92 92 31 gunter.clemenz@schuetz.net 8 Gerhard Palinkas Kantstraße 1 D-89568 Hermaringen Phone +49 (0) 73 22/9 33 34 81 Fax +49 (0) 73 22/9 33 34 83 Mobil +49 (0) 170/7 98 03 03 gerhard.palinkas@schuetz.net 4 2 Frank Reiners NIEDERSACHSEN Michael Bub NORDRHEIN- WESTFALEN BREMEN 1 Marco Kunstmann SCHLESWIG HOLSTEIN HAMBURG 9 Rupert Walter Blossenbergweg 4 D-92331 Lupburg Phone +49 (0) 94 92/9 07 90 75 Fax +49 (0) 94 92/9 07 90 76 Mobil +49 (0) 175/5 80 05 36 rupert.walter@schuetz.net 10 Stefan Köhler Dorfstraße 15 D-85445 Aufkirchen Phone +49 (0) 81 22/5 40 94 48 Fax +49 (0) 81 22/5 40 94 49 Mobil +49 (0) 151/40 07 23 55 stefan.koehler@schuetz.net RHEINLAND- PFALZ 7 SAARLAND Dirk Zuckarelli 5 HESSEN Martin Bannas Austria 11 Ludwig Kuen Traunsteinstraße 8 A-4654 Bad Wimsbach Phone +43 (0) 72 45/2 50 20 Fax +43 (0) 72 45/2 50 20 Mobil +43 (0) 664/38 38 172 ludwig.kuen@schuetz.net = Regional boundaries 12 Johannes Derntl Am Jägerberg 11 A-4310 Mauthausen Phone +43 (0) 72 38/29 266 Fax +43 (0) 72 38/29 266 Mobil +43 (0) 664/38 38 171 johannes.derntl@schuetz.net 8 BADEN- WÜRTTEMBERG Gerhard Palinkas VOR- ARLBERG 2 SCHÜTZ SURFACE HEATING SYSTEMS

Overview Contents of the price list. Contacts... 2-3 - SACHSEN-ANHALT THÜRINGEN 9 4 Michael Bub Im Mertenseifen 4 D-57258 Freudenberg-Alchen Phone +49 (0) 271/37 50 40 Fax +49 (0) 271/37 50 462 Mobil +49 (0) 170/5 75 98 66 michael.bub@schuetz.net MECKLENBURG- VORPOMMERN 6 Rupert Walter 3 BAYERN Jörg Hellriegel Gunter Clemenz BERLIN BRANDENBURG SACHSEN SCHÜTZ Profiled panel System... 4-7 SCHÜTZ Profiled foil System... 8-9 R50 Underfloor heating System... 10-13 Tacker panel System quadro-takk PRO... 14-17 Tacker panel System ultra-takk PRO... 18-21 Tacker panel System vari-takk PRO / vari-takk... 22-25 SCHÜTZ Klett System insulation roll... 26-28 SCHÜTZ Klett System folding panel... 29-31 SCHÜTZ ÖKO Dry panel-system... 32-35 SCHÜTZ Dry panel-system... 36-38 Floor construction according to DIN 1264... 39 SCHÜTZ Industrial Underfloor heating System... 40-41 SCHÜTZ System heating pipes... 42-43 SCHÜTZ Additional heat insulation... 44-45 Edge insulation strips... 46-47 Tools... 48-49 Accessories... 50-52 Screed additives... 53 Heating circuit manifold Dynomatic / comfort... 54-60 SCHÜTZ Distribution cabinets... 61-63 SCHÜTZ Manifold installation versions... 64-67 varimatic Control technology... 68-75 varimat Manifold control station... 76-79 General notes... 79 10 Stefan Köhler OBER- ÖSTEREICH NIEDERÖSTEREICH 11 Ludwig Kuen WIEN 12 Johannes Derntl TIROL SALZBURG STEIERMARK BURGEN- LAND OST- TIROL KÄRNTEN SCHÜTZ SURFACE HEATING SYSTEMS 3

SCHÜTZ Profiled panel System No more compromises! The SCHÜTZ Profiled panel System is ideal for all room geometries, all standard screed types, and can meet the most individual of requirements. No compromise in comfort, quality and flexibility. Suitable for duo-flex and tri-o-flex system heating pipes 14 x 2 mm 16 x 2 mm 17 x 2 mm Simple, integrated diagonal laying without the aid of clips Lobed system technology: 1-man laying For high traffic loads Combined EPS-T heat and impact sound insulation DIN-tested Vacuum-formed plastic membrane Treadable, foamed pipe-holder lobes Grid dimension 5.5 cm Membrane overhang with snap fasteners Net area 1.34 m² 4 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² System guide price ( /m 2, PG 01) duo-flex PE-Xa 14 x 2 mm duo-flex PE-Xa 16 x 2 mm duo-flex PE-Xa 17 x 2 mm tri-o-flex MV 14 x 2 mm tri-o-flex MV 16 x 2 mm Assembly time (guide time) Groups minutes/m ² 5.5 17.6 45.66 46.01 48.65 56.92 58.33 5.0 11.0 8.8 31.58 31.76 33.08 37.21 37.92 3.0 16.5 5.9 26.94 27.06 27.94 30.72 31.19 2.5 22.0 4.4 24.54 24.63 25.29 27.36 27.71 2.0 27.5 3.5 23.10 23.17 23.70 25.34 25.62 2.0 33.0 2.9 22.14 22.20 22.63 24.00 24.23 1.5 The system guide price mentioned includes 1 m² profiled panel EPS-T 30-2 (art. no. 4006923, page 5), 1 m edge insulation strips (art. no. 5000752, page 46) and system heating pipe (page 42-43) according to installation clearance (IC). Technical data Type EPS-T 30-2 (DES sg) Type EPS-T 20-2 (DES sg) Type EPS 150-11 (DEO) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.77 m ² K/W 0.51 m ² K/W 0.38 m ² K/W Thermal conductivity λ D (impact sound) 0.039 W/mK (WLG 040) 0.039 W/mK (WLG 040) (profiles) 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) Dynamic stiffness SD 20 SD 40 Impact sound reduction ΔL w,r 29 db* 25 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 28 mm dl-c = 18 mm dl-c = 11 mm 46 mm with lobes 36 mm with lobes 29 mm with lobes Panel size 930 x 1,496 mm 930 x 1,496 mm 930 x 1,496 mm 1,540 x 450 x 950 mm 1,540 x 450 x 950 mm 1,540 x 450 x 950 mm Max. load capacity 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Max. compressive stress at 10 % compression 150 kpa (acc. to EN 13163) Article number 4006923 4013056 4006926 13.40 m 2 16.08 m 2 24.12 m 2 10 panels 12 panels 18 panels /pallet 67.00 m 2 80.40 m 2 120.60 m 2 Price group 01 01 01 Price/m 2 16.47 17.27 15.19 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 5

SCHÜTZ Profiled panel System System components Compensating roll ultra-takk PRO 20-2 (DES sg) Thermal and impact sound insulation of ex- panded rigid polystyrene EPS-T foam according to EN13163. Plastic covering layer with woven tape and 5 cm grid print as Screed moisture protection according to DIN 18560. And for secure fastening of the heating pipes by means of heating pipe retainers, blunt edge, with longitudinal 30 mm covering-layer overhang. Compensating elements EPS-T 30-2 EPS 150-11 Thermal insulation panels without pipe holder lobes with woven tape as compensating element for doorways, expansion joints and manifold connection in two versions. Compensating roll Compensating element Compensating element Technical data ultra-takk PRO 20-2 (DES sg) EPS-T 30-2 EPS 150-11** ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.46 m ² K/W 0.77 m ² K/W 0.32 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.039 W/mK (WLG 040) 0.034 W/mK (WLG 035) Dynamic stiffness SD 30 SD 30 Impact sound reduction ΔL w,r 27 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 18 mm dl-c = 28 mm dl-c = 11 mm Dimensions 1,000 x 10,000 mm 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 800 x 350 mm 1,000 x 600 x 240 mm 1,000 x 600 x 88 mm Article number 4007128 4001251 4011671 10.00 m 2 /roll 4.80 m 2 4.80 m 2 without pipe holders** 80 pipe holders without pipe holders** Price group 01 01 01 Price/m 2 6.74 12.15 10.55 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 ** Please plan for clip rails for fastening the heat pipe separately, page 50 6 SCHÜTZ SURFACE HEATING SYSTEMS

Round profile dmr. 18 mm length 25 m For fastening the edge insulation strips membrane skirt to the system panel. Door & connecting element 905 x 240 mm For connecting system panels or for connecting system panels and compensating elements. Technical data Round profile Door & connecting element Diameter (dmr.) 18 mm Dimensions 25 m roll length 905 x 240 mm Article number 5001192 3018230 10 rolls 25 pieces Price group 01 01 Price 1.82 /m 6.50 /piece SCHÜTZ SURFACE HEATING SYSTEMS 7

SCHÜTZ Profiled foil System For a 1-man installation with snap fastener. The "little sister" of the familiar SCHÜTZ Profiled panel is suitable for all installations where insulation already existing in the building. The profiles are also completely stable, and can be walked on without difficulty. Thanks to the snap-fastener principle, the membrane can be fitted easily and quickly by a single person. Another advantage: the pipes can be laid diagonally without additional fastening kit. Suitable for duo-flex and tri-o-flex system heating pipes 14 x 2 mm 16 x 2 mm 17 x 2 mm Stable and tread-proof pegs Suitable for pipe dimensions 14 17 mm Diagonal system heating pipe installation without additional pipe fastening kit Fast, easy installation One-man installation through snap-fastener principle Technical data Pipe diameter (dmr.) Profiled foil 14-17 mm Effective area per panel 1.2 m 2 Installation clearance straight 60 mm diagonal 84 mm Dimensions incl. overlap 1,470 x 870 mm Colour Peg height Panel height Dimensions black-anthracite 21 mm 21 mm 1,550 x 880 x 170 mm Article number 5004521 16.80 m 2 14 panels /pallet 201.60 m 2 Price group 01 Price/m 2 9.10 8 SCHÜTZ SURFACE HEATING SYSTEMS

System components Connecting strips 910 x 125 mm For connecting the system elements. Compensating element with clip rail Door transition element 910 x 184 mm For transitions to areas on which no load membrane has been laid, e.g. manifold connection, door transition area. 1.00 x 1.20 m, clip rail 1 m long, for system heating pipe: with diameter 14 mm with diameter 16-17 mm Technical data Door transition element Connecting strips Compensating element with clip rail Pipe diameter (dmr.) 14 mm 16-17 mm Dimensions 910 x 184 mm (L x B) 910 x 125 mm (L x B) membrane format 1000 x 1200 mm (L x B), rail 1000 mm Article number 5004527 5004526 4023730 4023733 10 pieces 10 pieces 1 piece 1 piece Price group 01 01 01 01 Price/pieces 2.91 3.07 12.34 12.34 SCHÜTZ SURFACE HEATING SYSTEMS 9

R50 Underfloor heating System The innovative Underfloor heating System for building renovations. An innovative, complete floor heating system with Insulation of both impact sound and heat convenient, efficient, and future-proof. Can be installed quickly and without too much difficulty. It is suitable for the demands of renovating old buildings. Suitable for duo-flex system heating pipes 12 x 1.5 mm Lobed system technology: 1-man laying Vacuum-formed plastic membrane with grid dimension 12 cm Heat and impact sound insulation DIN-tested Minimal installation height, from 42 mm including impact sound, heat insulation and screed Foamed pipe-holder lobes which can be walked on For dmr. 12 mm heating pipes Membrane overhang with snap fasteners Net area 1.21 m² Integrated diagonal installation 10 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² System guide price ( /m 2, PG 01) duo-flex PE-Xa 12 x 1.5 mm Assembly time (guide time) Groups minutes/m ² 12 8.0 34.36 3.0 24 4.0 28.08 2.0 The system guide price mentioned includes 1 m² R50 system panel EPS-T 32-2 (art. no. 4012525, page 11), 1 m edge insulation strips (art. no. 5002603, page 47) and system heating pipe (pages 42-43) according to installation clearance (IC). Technical data Type EPS-T 32-2 (DES sg) Type EPS 150-31 (DEO) Type EPS 150-22 (DEO) ÖNORM B 6000: EPS-T 650 Thermal resistance R D 0.77 m ² K/W 0.77 m ² K/W 0.51 m ² K/W Thermal conductivity λ D (impact sound) 0.039 W/mK (WLG 040) (profiles) 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) Dynamic stiffness SD 50 Impact sound reduction ΔL w,r 24 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 30 mm with lobes dn = 31 mm with lobes dn = 22 mm with lobes Dimensions (gross) 1,500 x 900 mm 1,500 x 900 mm 1,500 x 900 mm 1,540 x 450 x 950 mm 1,540 x 450 x 950 mm 1,540 x 450 x 950 mm Max. load capacity 5 kpa (acc. to EN 13163) Max. compressive stress at 10 % compression 150 kpa (acc. to EN 13163) 150 kpa (acc. to EN 13163) Article number 4012525 4030523 4018168 15.73 m 2 16.93 m 2 22.99 m 2 13 panels 14 panels 19 panels Price group 01 01 01 Price/m 2 20.77 22.87 19.73 Note: Detailed installation notes depending on different working loads are illustrated in our technical documentation. * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 11

R50 Underfloor heating System System components Compensating elements Thermal insulation panels EPS-T 20-2 EPS 150-11 ESP DEO 100/20 mm Thermal insulation panels without pipe holder lobes with woven tape as compensating element for doorways, expansion joints and manifold connection. Compensating roll Thermal insulation panel Thermal insulation panel Technical data ultra-takk PRO 20-2 (DES sg)** EPS 150-11** EPS DEO 100/20 ÖNORM B 6000: EPS-T 650 Thermal resistance R D 0.45 m ² K/W 0.32 m ² K/W 0.59 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) Dynamic stiffness SD 30 Impact sound reduction ΔL w,r 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 18 mm dn = 11 mm dn = 20 mm Dimensions 1,000 x 10,000 mm 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 800 x 350 mm 1,000 x 600 x 88 mm 1,000 x 1,200 x 200 mm Article number 4007128 4011671 4020645 10.00 m 2 /roll 4.80 m 2 /4 panels 12.00 m 2 /5 panels without heat pipe holder** without heat pipe holder** Price group 01 01 01 Price/m 2 6.74 10.55 8.34 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 ** Please plan for clip rails for fastening the heat pipe separately, page 50 12 SCHÜTZ SURFACE HEATING SYSTEMS

R50 Door & connecting element 1,500 x 340 mm For safely covering the cut edges of system panels and compensating element; Manifold connection panel requirement: max. 3.40 m. R50 Connecting profile 1,440 x 240 mm For connecting panel remainders. Technical data R50 Door & connecting element R50 Connecting profile Dimensions 1,500 x 340 mm 1,440 x 240 mm Article number 3028938 3028937 10 pieces 10 pieces Price group 01 01 Price/pieces 5.54 5.18 SCHÜTZ SURFACE HEATING SYSTEMS 13

Tacker panel System quadro-takk PRO The square folding roll in six variants. A clever principle: ideal installation properties, simple transport and storage. The SCHÜTZ heating pipes, are securely fastened by the strong, 8 mm-wide heating pipe brackets. A practical assembly device staples quickly and reliably. Tacker panel system in 6 different types Now with adhesive strips! Stapling system technology: Improved hold High installation performance EPS-T folding roll DIN-tested Quality monitored Plastic grid cover sheet with woven tape 30 mm covering layer overhang on the long side for joint coverage 10.3 m² per folded roll Now with adhesive strips 14 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² Heating pipe retainer approx pieces System guide price ( /m 2, PG 01) duo-flex PE-Xa 14 x 2 mm duo-flex PE-Xa 16 x 2 mm duo-flex PE-Xa 17 x 2 mm Assembly time (guide time) Groups minutes/m ² 5 18.0 72 45.71 46.07 48.77 7.0 10 8.8 36 27.75 27.92 29.24 4.0 15 5.8 24 21.87 21.98 22.85 3.5 20 4.6 19 19.50 19.59 20.28 3.0 25 3.7 15 17.70 17.77 18.33 2.5 30 3.1 13 16.56 16.62 17.08 2.0 35 2.7 10 15.65 15.70 16.11 2.0 40 2.3 10 15.01 15.05 15.40 1.5 The system guide price mentioned includes 1 m² quadro-takk PRO EPS-T 30-2 (art. no. 4001076, page 15), 1 m edge insulation strips (art. no. 1163310, page 46) system heating pipe (pages 42-43) and heat pipe bracket (page 25) according to installation clearance (IC). Technical data Type EPS-T 35-3 (DES sm) Type EPS-T 30-3 (DES sm) Type EPS-T 30-2 (DES sg) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.80 m ² K/W 0.68 m ² K/W 0.77 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) 0.039 W/mK (WLG 040) Dynamic stiffness SD 15 SD 20 SD 30 Impact sound reduction ΔL w,r 31 db* 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 32 mm dl-c = 27 mm dl-c = 28 mm Panel size 1,000 x 8,100 mm 1,000 x 10,300 mm 1,000 x 10,300 mm 600 x 600 x 1,000 mm 600 x 600 x 1,000 mm 600 x 600 x 1,000 mm Max. load capacity 4 kpa (acc. to EN 13163) 4 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation single-layer two-layer single-layer Higher traffic load no no yes Article number 4001067 4001070 4001076 8.1 m 2 /roll 10.3 m 2 /roll 10.3 m 2 /roll /pallet 64.80 m 2 82.40 m 2 82.40 m 2 Price group 01 01 01 Price/m 2 9.57 8.68 9.60 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 15

Tacker panel System quadro-takk PRO It couldn't be easier unfold and roll. Special version Technical data Type EPS-T 30-2 (DES sg) Type EPS-T 25-2 (DES sg) Type EPS DEO 100/30 ÖNORM B 6000: EPS-T 1000 B 6000: EPS-T 650 Thermal resistance R D 0.88 m ² K/W 0.57 m ² K/W 0.88 m ² K/W Thermal conductivity λ D 0.034 W/mK (WLG 035) 0.044 W/mK (WLG 045) 0.034 W/mK (WLG 035) Dynamic stiffness SD 30 SD 20 Impact sound reduction ΔL w,r 27 db* 29 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 28 mm dl-c = 23 mm dn = 30 mm Panel size 1,000 x 10,300 mm 1,000 x 12,200 mm 1,000 x 10,300 mm 600 x 600 x 1,000 mm 600 x 600 x 1,000 mm 600 x 600 x 1,000 mm Max. load capacity 10 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Max. compressive stress at 10 % compression 100 kpa (acc. to EN 13163) Type of installation single-layer two-layer single-layer Higher traffic load yes yes yes Article number 4021316 4001074 4001077 10.3 m 2 /roll 12.2 m 2 /roll 10.3 m 2 /roll /pallet 82.40 m 2 97.60 m 2 82.40 m 2 Price group 01 01 01 Price/m 2 16.11 7.95 10.73 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 16 SCHÜTZ SURFACE HEATING SYSTEMS

SCHÜTZ Underfloor heating SYSTEMS 17

Tacker panel System ultra-takk PRO Roll out install done! The useful alternative when Underfloor heating must be installed over large areas. Suitable for duo-flex and tri-o-flex system heating pipes 14 x 2 mm 16 x 2 mm 17 x 2 mm 20 x 2 mm Stapling system technology: Improved hold High installation performance Heat and impact sound insulation of expanded polystyrene rigid foam EPS-T according to EN 13163 Plastic covering layer with woven tape and 5 cm grid print as screed moisture protection according to DIN 18560 and for securely fastening the heating pipes Blunt edge 30 mm covering layer overhang on the long side for joint coverage With adhesive strips by request 18 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² Heating pipe retainer approx pieces System guide price ( /m 2, PG 01) duo-flex PE-Xa 14 x 2 mm duo-flex PE-Xa 16 x 2 mm duo-flex PE-Xa 17 x 2 mm Assembly time (guide time) Groups minutes/m ² 5 18.0 72 44.90 45.26 47.96 7.0 10 8.8 36 26.94 27.11 28.43 4.0 15 5.8 24 21.06 21.17 22.04 3.5 20 4.6 19 18.69 18.78 19.47 3.0 25 3.7 15 16.89 16.96 17.52 2.5 30 3.1 13 15.75 15.81 16.27 2.0 35 2.7 10 14.86 14.89 15.30 2.0 40 2.3 10 14.20 14.24 14.59 1.5 The system guide price mentioned includes 1 m² ultra-takk PRO EPS-T 30-2 (art. no. 4005634, page 19), 1 m edge insulation strips (art. no. 1163310, page 46), system heating pipe (page 42-43) and heat pipe bracket (page 25) according to installation clearance (IC), 1 m adhesive tape (art. no. 7001670, page 50). Technical data Type EPS-T 35-3 (DES sm) Type EPS-T 30-3 (DES sm) Type EPS-T 30-2 (DES sg) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.80 m ² K/W 0.68 m ² K/W 0.77 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) 0.039 W/mK (WLG 040) Dynamic stiffness SD 15 SD 20 SD 30 Impact sound reduction ΔL w,r 31 db* 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 32 mm dl-c = 27 mm dl-c = 28 mm Panel size 1,000 x 10,000 mm 1,000 x 10,000 mm 1,000 x 10,000 mm Max. load capacity 4 kpa (acc. to EN 13163) 4 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation single-layer two-layer single-layer Higher traffic load no no yes Article number 4001300 4001095 4005634 10.00 m 2 /roll 10.00 m 2 /roll 10.00 m 2 /roll Price group 01 01 01 Price/m 2 8.51 7.78 8.79 with adhesive strips with adhesive strips with adhesive strips Article number 4032237 4028087 4032238 Price by request by request by request * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 19

Tacker panel System ultra-takk PRO Roll out install done! Special version Technical data Type EPS-T 30-2 (DES sg) Type EPS-T 25-2 (DES sg) Type EPS-T 20-2 (DES sg) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.88 m ² K/W 0.57 m ² K/W 0.46 m ² K/W Thermal conductivity λ D 0.034 W/mK (WLG 035) 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) Dynamic stiffness SD 30 SD 20 SD 30 Impact sound reduction ΔL w,r 27 db* 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 28 mm dl-c = 23 mm dl-c = 18 mm Panel size 1,000 x 10,000 mm 1,000 x 10,000 mm 1,000 x 10,000 mm Max. load capacity 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation single-layer two-layer two-layer Higher traffic load yes yes yes Article number 4034782 4001098 4007128 10.00 m 2 /roll 10.00 m 2 /roll 10.00 m 2 /roll Price group 01 01 01 Price/m 2 12.13 7.07 6.74 with adhesive strips with adhesive strips with adhesive strips Article number 4034780 4029021 4029022 Price by request by request by request * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 20 SCHÜTZ FLÄCHENHEIZSYSTEME

SCHÜTZ Underfloor heating SYSTEMS 21

Tacker panel System vari-takk PRO Installed in one move. 2.4 m² are laid in a single step. With EPS-T insulation, it also contributes towards thermal insulation and improved impact sound insulation. As a twin-wall panel for laying on insulation on site. This folding panel is also particularly suitable for laying over larger areas. Available in panel thicknesses 2 mm 20 mm 25 mm 30 mm 35 mm Stefan Löser Löser & Anspach Stapling system technology: Improved hold High installation performance Thermal insulation of hard expanded polystyrene EPS rigid foam according to EN 13163 Plastic covering layer with woven tape and 5 cm grid print as screed moisture protection according to DIN 18560 and for securely fastening the heating pipe Blunt edge 30 mm covering layer overhang on the long side for joint coverage vari-takk 2 mm twin-wall panel for laying on the insulation on site NEW 22 SCHÜTZ SURFACE HEATING SYSTEMS

Technical data Type EPS-T 35-3 (DES sm) Type EPS-T 30-3 (DES sm) Type EPS-T 30-2 (DES sg) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.80 m ² K/W 0.68 m ² K/W 0.77 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) 0.039 W/mK (WLG 040) Dynamic stiffness SD 15 SD 20 SD 30 Impact sound reduction ΔL w,r 31 db* 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 32 mm dl-c = 27 mm dl-c = 28 mm Panel size 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 1,200 x 490 mm 1,000 x 1,200 x 480 mm 1,000 x 1,200 x 480 mm Max. load capacity 4 kpa (acc. to EN 13163) 4 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation two-layer two-layer single-layer Higher traffic load no no yes Article number 4001223 4001217 4003778 16.8 m 2 19.2 m 2 19.2 m 2 7 panels 8 panels 8 panels /pallet 67.20 m 2 76.80 m 2 76.80 m 2 Price group 01 01 01 Price/m 2 8.51 7.78 8.79 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 23

Tacker panel System vari-takk PRO Installed in one move. NEW Available from the 3rd quarter 2018 Technical data Type EPS-T 25-2 (DES sg) Type EPS-T 20-2 (DES sg) Type 2 mm ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.57 m ² K/W 0.46 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) Dynamic stiffness SD 20 SD 30 Impact sound reduction ΔL w,r 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) F / E under screed Panel thickness dl-c = 23 mm dl-c = 18 mm 2 mm Panel size 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 1,200 x 500 mm 1,000 x 1,200 x 400 mm 1,000 x 1,200 x 40 mm Max. load capacity 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation two-layer two-layer two-layer Higher traffic load yes yes Article number 4006683 4026795 4037731 24.0 m 2 24.0 m 2 24.0 m 2 10 panels 10 panels 10 panels /pallet 96 m 2 120 m 2 600 m 2 Price group 01 01 01 Price/m 2 7.07 6.74 11.10 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 24 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories "Erwin" Assembly tool For placing the heating pipe retainers (art. no. 3028686) 38 mm into stapling system panels. Blue, short (38 mm) Heating pipe retainer For stapler panels, for secure fixing of heating pipes (14-17 mm) using assembly tool "Erwin" (art. no. 3025968), with magazine. "Klaus" Assembly tool For placing the heating pipe retainers (art. no. 5004453) 58 mm with magazine, including combination foot. Black, lang (58 mm) Heating pipe retainer For more effective handling of 20 mm system heating pipes with the "Klaus" assembly tool (art. no. 5004386). Assembly tool "Erwin" Heat. pipe retainer short Assembly tool "Klaus" Heat. pipe retainer long Article number 3025968 3028686 5004386 5004453 1 piece 200 pieces 1 piece 300 pieces /pallet 40,000 pieces 40,000 pieces Price group 03 01 03 01 Price/pieces 242.89 0.09 244.17 0.17 SCHÜTZ SURFACE HEATING SYSTEMS 25

SCHÜTZ Klett System insulation roll For a foolproof installation. The new hook and loop system makes installation work for surface heating easier, therefore offering a more efficient, cleaner, one-man installation with maximum retention force and proven SCHÜTZ quality. Now with adhesive strips! Suitable for duo-flex Klett heating pipe systems 16 x 1.8 mm 17 x 2 mm Klett system technology: high installation performance Heat and impact sound insulation of expanded polystyrene EPS-T rigid foam according to EN 13163 Klett PE foam 6 mm, self-adhesive for laying on the additional insulation on site NEW Plastic covering layer with interwoven fibres and grid print 5 cm as screed moisture protection according to DIN 18560 and for securely fastening the heating pipe Blunt edge 30 mm covering layer overhang on the long side for joint coverage Now with adhesive strips except for Klett PE foam 6 mm 26 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² System guide price ( /m 2, PG 01) duo-flex PE-Xa 16 x 1.8 mm duo-flex PE-Xa 17 x 2 mm Assembly time (guide time) Groups minutes/m ² 5 18.0 56.71 59.41 5.0 10 8.8 35.18 36.50 3.0 15 5.8 28.16 29.03 2.5 20 4.6 25.35 26.04 2.0 25 3.7 23.25 23.80 2.0 30 3.1 21.84 22.31 1.5 The system guide price mentioned includes 1 m² Klett system insulation roll EPS-T 30-2 (art. no. 4028603, page 27), 1 m spring edge insulation strips orange (art. no. 5001370, page 47), system heating pipe (pages 42-43) and 1 m hook/ joint strip (art. no. 5005324, page 29). Technical data Type EPS-T 35-3 (DES sm) Type EPS-T 30-3 (DES sm) Type EPS-T 30-2 (DES sg) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.80 m ² K/W 0.68 m ² K/W 0.77 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) 0.039 W/mK (WLG 040) Dynamic stiffness SD 15 SD 20 SD 30 Impact sound reduction ΔL w,r 31 db* 29 db* 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 32 mm dl-c = 27 mm dl-c = 28 mm Roll size 1,000 x 10,000 mm 1,000 x 10,000 mm 1,000 x 10,000 mm Max. load capacity 4 kpa (acc. to EN 13163) 4 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation single-layer two-layer single-layer Higher traffic load no no yes Article number 4028605 4028604 4028603 10.00 m 2 /roll 10.00 m 2 /roll 10.00 m 2 /roll Price group 01 01 01 Price/m 2 11.92 10.88 12.34 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 27

SCHÜTZ Klett System insulation roll For a foolproof installation. The new hook and loop fleece is entirely self- adhesive, for laying on additional insulation on site, ideal for renovations. Technical data Type EPS-T 25-2 (DES sg) Type EPS-T 20-2 (DES sg) NEW Type Klett PE foam 6 mm ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 Thermal resistance R D 0.57 m ² K/W 0.46 m ² K/W Thermal conductivity λ D 0.044 W/mK (WLG 045) 0.044 W/mK (WLG 045) Dynamic stiffness SD 20 SD 30 210 MN/m 3 Impact sound reduction ΔL w,r 29 db* 27 db* 13 db (test certificate) Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dl-c = 23 mm dl-c = 18 mm dn = 6 mm Roll size 1,000 x 10,000 mm 1,000 x 10,000 mm 1,000 x 20,000 mm Max. load capacity 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Type of installation two-layer two-layer two-layer Higher traffic load yes yes yes Article number 4028600 4028599 3081924 10.00 m 2 /roll 10.00 m 2 /roll 20.00 m 2 /roll Price group 01 01 01 Price/m 2 9.94 9.41 11.90 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 28 SCHÜTZ SURFACE HEATING SYSTEMS

SCHÜTZ Klett System folding panel System components Installation aid Door spreader Connecting strips Hook/jointing tape For securely fastening of the hook and loop panels (50 mm wide, 100 m on each roll). For improved pipe guidance when installing. Door spreader Hook/jointing tape Article number 5005323 5005324 1 piece 100 m/roll Price group 03 01 Price/pieces 64.42 40.00 SCHÜTZ SURFACE HEATING SYSTEMS 29

SCHÜTZ Klett System folding panel For a foolproof installation. The hook and loop system enables fast, uncomplicated installation. The high-quality material of the covering layer provides maximum hold thanks to perfect interlocking between the heating pipe and the system insulation panel. Correcting the position of the pipe is therefore possible at any time without leaving a trace. In order that all the pipes have the correct spacing and are lying straight, the dimensional division on the insulation panel provides a uniform orientation guide. Suitable for duo-flex Klett heating pipe systems 16 x 1.8 mm 17 x 2 mm Type EPS DEO 100/035 Type EPS DEO 100/035 Type EPS-T 30-2 Technical data 10 mm 15 mm Thermal resistance R D 0.29 m ² K/W 0.44 m ² K/W 0.77 m ² K/W Thermal conductivity λ D 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) 0.039 W/mK (WLG 040) Dynamic stiffness SD 30 Impact sound reduction ΔL w,r 27 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) E (EN 13501-1) Panel thickness dn = 10 mm dn = 15 mm dl-c = 28 mm Panel size 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 1,200 x 240 mm 1,000 x 1,200 x 240 mm 1,000 x 1,200 x 480 mm Max. load capacity 5 kpa (acc. to EN 13163) Max. compressive stress at 10 % compression 100 kpa (acc. to EN 13163) 100 kpa (acc. to EN 13163) Type of installation two-layer single-layer single-layer Higher traffic load yes yes yes Article number 4028618 4028619 4030637 28.8 m 2 19.2 m 2 19.2 m 2 12 panels 8 panels 8 panels /pallet 230.4 m 2 153.6 m 2 76.8 m 2 Price group 01 01 01 Price/m 2 11.72 14.12 12.34 30 SCHÜTZ SURFACE HEATING SYSTEMS

SCHÜTZ Klett System folding panel For a foolproof installation. NEW Available from the 3rd quarter 2018 Technical data Type EPS-T 20-2 Type Klett system folding panel 3 mm Thermal resistance R D 0.47 m ² K/W Thermal conductivity λ D 0.043 W/mK (WLG 045) Dynamic stiffness SD 30 Impact sound reduction ΔL w,r 27 db* Fire behaviour RtF E (EN 13501-1) F / E under screed Panel thickness dl-c = 18 mm 3 mm Panel size 1,000 x 2,400 mm 1,000 x 2,400 mm 1,000 x 1,200 x 400 mm 1,000 x 2,400 x 60 mm Max. load capacity 5 kpa (acc. to EN 13163) Max. compressive stress at 10 % compression Type of installation single-layer two-layer Higher traffic load yes yes Article number 4030635 4036409 24 m 2 24 m 2 10 panels 10 panels /pallet 120 m 2 480 m 2 Price group 01 01 Price/m 2 9.41 15.50 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 SCHÜTZ SURFACE HEATING SYSTEMS 31

SCHÜTZ ÖKO Dry panel System The ecological underfloor heating. The ÖKO system can be laid as a floor heating (almost) directly with the floor coverings. The heating element consists of wood fibres. Due to the high density, the wood fibre insulation has a higher weight, and therefore also a high impact sound insulation. All materials are easy to separate and can be recycled. Suitable for tri-o-flex system heating pipes 16 x 2 mm NOTE: In order to keep versions b + c consistent with DIN EN 1264, the necessary insulation must be applied by the installer: Please use wood fibre insulation! The Underfloor heating System can be used in old, new and prefabricated constructions Profile panels of 140 kpa wood fibre Manufactured to DIN 68755 T1 Pipe grooves with conductive modules made of aluminium Laid in a meander-like arrangement Installation in 25 cm and 12.5 cm spacing For dry installation Net area 0.5 m² 32 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² System guide price ( /m 2, PG 01) tri-o-flex 16 x 2 mm (dry screed) Assembly time (guide time) Groups minutes/m ² 12.5 8.0 107.52 16.0 25.0 4.0 90.94 12.0 Area approx. 10 m² IC 25 Article number Name Quantity 5004810 Occupancy zone OZ (IC= 250 mm) 8 m 2 5004812 Head element occupancy zone H/OZ 10 pieces 5004815 Universal element RA 2 pieces 5004816 Supply line SL 2 pieces 5004817 Bend 90 2 pieces 3002688 tri-o-flex 16 x 2 mm 40 m 5004818 Edge insulation strips 100/8 mm 10 m 5004820 Timber frame TF 12 pieces 5004822 Timber frame pipe feed-through PF 2 pieces Area approx. 10 m² IC 12.5 Article number Name Quantity 5004811 Edge zone EZ (IC= 125 mm) 8 m 2 5004813 Head element occupancy zone H/EZ 10 pieces 5004815 Universal element RA 2 pieces 5004816 Supply line SL 1 piece 5004817 Bend 90 3 pieces 3002688 tri-o-flex 16 x 2 mm 80 m 5004818 Edge insulation strips 100/8 mm 10 m 5004820 Timber frame TF 12 pieces 5004822 Timber frame pipe feed-through PF 2 pieces SCHÜTZ SURFACE HEATING SYSTEMS 33

SCHÜTZ ÖKO Dry panel System The ecological underfloor heating. Technical data Dry panel type 30 occupancy zone IC 25 Dry panel type 30 edge zone IC 12.5 ÖNORM Thermal resistance R D 0.75 m ² K/W 0.75 m ² K/W Impact sound reduction ΔL w,r ab 21 db* ab 21 db* Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) Load capacity dry screed 2.0 kpa 2.0 kpa Panel thickness dl-c = 30 mm dl-c = 30 mm Panel size 1,000 x 500 mm 1,000 x 500 mm 1,000 x 500 x 300 mm 1,000 x 500 x 300 mm Max. load capacity 2.0 kpa 2.0 kpa Article number 5004810 5004811 5.0 m 2 5.0 m 2 10 panels 10 panels Price group 01 01 Price/m 2 67.95 47.60 Profile panel of 140 kpa wood fibre, manufactured according to DIN 68755 T1 pipe guidance grooves with aluminium thermal conduction modules arranged for meandering installation, installation clearance add grid spacing 25 cm and 12.5 cm. System components Technical data Head element OZ ALU IC 25 Head element EZ ALU IC 12.5 Head element IC 25 + 12.5 Element size (L x W x H) 250 x 500 x 30 mm 250 x 500 x 30 mm 250 x 375 x 30 mm Article number 5004812 5004813 5004814 1 piece 1 piece 1 piece Price group 01 01 01 Price/pieces 13.71 15.69 8.73 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m 2 34 SCHÜTZ SURFACE HEATING SYSTEMS

System components Technical data Edge element Supply element Manifold connecting element Element size (L x W x H) 1,000 x 500 x 30 mm 1,000 x 125 x 30 mm 1,000 x 545 x 30 mm Article number 5004815 5004816 5004837 1 piece 1 piece 1 piece Price group 01 01 01 Price/pieces 16.00 6.65 64.94 Technical data Bend 90 Timber frame, long Timber frame, short Element size (L x W x H) 250 x 250 x 30 mm 1,000 x 45 x 30 mm 250 x 45 x 30 mm Article number 5004817 5004820 5004822 1 piece 1 piece 1 piece Price group 01 01 01 Price/pieces 6.65 4.99 1.97 Technical data Edge insulating stripes Thermal conduction plate Element size (L x W x H) 2,500 x 10 x 140 mm 495 x 242 x 0.5 mm Article number 5004818 5004823 25 m 20 pieces Price group 01 01 Price 1.35 /m 4.05 /pieces SCHÜTZ SURFACE HEATING SYSTEMS 35

SCHÜTZ Dry panel System Simply convenient! In the dry construction system from SCHÜTZ the heating pipes are installed using thermal conduction modules inside the thermal insulation. The thermal conduction modules here ensure an even distribution of the heat #. Suitable for duo-flex and tri-o-flex system heating pipes 14 x 2 mm NOTE: In this system the additional Insulation must be applied by the installer (EPS DEO 150/035). The Underfloor heating System can be used in old, new and prefabricated constructions Polystyrene high-restistance foam panel with swallowtail joints Snail or meandering installation Heat transfer module with predetermined breaking points For dry and wet screed installation Net area: 0.66 m² # According to the dry screed manufacturer 36 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² Thermal conduction module approx m/m ² System weight System guide price ( /m 2, PG 01) Assembly time (guide time) duo-flex PE-Xa 14 x 2 mm (wet screed) tri-o-flex MV 14 x 2 mm (dry screed) Groups minutes/m ² 11.5 8.7 7.4 (9.2 pieces) 6.6 kg/m 2 54.42 59.98 8.0 23.0 4.4 3.8 (4.7 pieces) 5.9 kg/m 2 34.58 37.39 6.5 The system guide price stated here includes 1 m² dry construction panel type 30 (art. no. 4003961, page 37), 1 m² protective separating membrane (art. no. 1163388, (page 38), 1 m edge insulation strips (art. no. 1163310, page 46) system heating pipe (pages 42-43) and thermal conduction module (page 38) according to installation clearance. Technical data Type 30 (DEO) Type 25 (DEO) ÖNORM Thermal resistance R D 0.77 m ² K/W 0.57 m ² K/W Thermal conductivity λ D 0.034 W/mK (WLG 035) 0.034 W/mK (WLG 035) Fire behaviour RtF E (EN 13501-1) E (EN 13501-1) Panel thickness dn = 30 mm dn = 25 mm Panel size 606 x 1,181 mm 606 x 1,181 mm 606 x 1,181 x 320 mm 606 x 1,181 x 320 mm Max. load capacity wet screed 5 kpa (acc. to EN 13163) 5 kpa (acc. to EN 13163) Max. load capacity dry screed 2.0**/5.0*** kpa 2.0**/5.0*** kpa Article number 4003961 4003959 6.60 m 2 7.92 m 2 10 panels 12 panels /pallet 92.40 m 2 110.88 m 2 Price group 01 01 Price/m 2 12.28 11.30 * according to DIN 4109-34: 2016-07 with screed mass per unit area 120 kg/m2 ** max. surface loading for Fermacell 2E22, other dry screeds according to manufacturer's data *** max. surface loading for Fermacell 2E22 + 10 mm gypsum fibreboard, other dry screeds according to manufacturer's data SCHÜTZ SURFACE HEATING SYSTEMS 37

SCHÜTZ Dry panel System System components Thermal conduction module with predetermined breaking points Insulation dowel For a precisely fitting installation. Protective separating membrane Made of polyethylene, for the protection of the polystyrene insulation panels when installing on bituminous sealing strips or those containing softeners, and as a protective layer. Technical data Insulation dowel Type WLM 805 Protective separating membrane Depth of the pipe guide 14 mm Width 112 mm Module length 805 mm Insulating plate diameter 45 mm Length of the dowel l 85 mm Nominal drill diameter d 0 8 mm Max. insulation material thickness t fix 60 mm Material thickness 0.2 mm Roll length 50 m Membrane width 4 m Article number 5000230 3007120 1163388 250 pieces 30 pieces 200 m 2 /roll Price group 01 01 01 Price 1.03 /pieces 2.88 /pieces 0.96 /m 2 38 SCHÜTZ SURFACE HEATING SYSTEMS

Floor structure for underfloor heating According to DIN EN 1264-4. The energy-saving regulations give planners and architects more freedom. The specified primary energy requirement of the building can optionally be achieved optionally through good insulation or innovative installation technology. To make optimum use of this freedom, and to save construction and operating costs, the building technology must in future be included in the building design. The structure heights illustrated below reproduce the minimum requirements of DIN EN 1264 "Floor heating". As a result of national energy regulations, higher thermal resistance is may be required of the surrounding surfaces of the building. These should be queried with authorised construction engineers. Minimum thermal resistance (m 2 K/W) of the insulating layers under the floor heating: Heated room located underneath Room without heating, or heated at intervals located underneath or lying directly on the ground* Outside temperature for design T d 0 C Outside air underneath Outside temperature for design 0 C > T d -5 C Outside temperature for design -5 C > T d -15 C 0.75 m 2 K/W 1.25 m 2 K/W 1.25 m 2 K/W 1.50 m 2 K/W 2.00 m 2 K/W These values apply to new constructions with normal inside temperatures, i.e. to buildings which, depending on their purpose, are heated to an inside temperature of 19 C or more over a period of more than 4 months each year. Structure types** of the SCHÜTZ floor heating as staple system, taking as an example the quadro-takk PRO EPS-T 30-2 or as the EPS-T 30-2 lobed system as an example: Heated room located underneath Room without heating, or heated at intervals located underneath or lying directly on the ground* Outside air underneath Outside temperature for design T d -15 C Tackersystem quadro-takk PRO EPS-T 30-2 Lobed system EPS-T 30-2 93 mm single-layer 93 mm single-layer 113 mm Additional insulation EPS 035 DEO, 20 mm 113 mm Additional insulation EPS 035 DEO, 20 mm 143 mm Additional insulation EPS 035 DEO, 50 mm 143 mm Additional insulation EPS 035 DEO, 50 mm According to the energy saving regulations, when renovating, the floor structure can be executed with the greatest possible insulation layer thickness with thermal conductivity λ D = 0.04 W/mK that does not require the door heights to be adjusted. * This value should be increased with the groundwater level of 5 m. ** The height information of the structure variants are measured from the related to the raw surface to the upper edge of the screed (without top covering, pipe overlap 45 mm). SCHÜTZ SURFACE HEATING SYSTEMS 39

SCHÜTZ Industrial underfloor heating System Ready for any stress load. SCHÜTZ industrial underfloor heating is particularly suitable for heating and cooling large-area industrial buildings such as production facilities, warehouse halls and workshops up to large aircraft hangars. The underfloor heating is installed in the floor baseplate itself. Depending on static requirements, the heating pipes are fastened to the lower reinforcing mesh. Suitable for system heating pipes 20 x 2.0 mm 25 x 2.3 mm Industrial underfloor heating with heating pipes in the baseplate without a separate screed layer Pipe support mats available on request Floor structure with lower and upper reinforcement in accordance with onsite execution for industrial floors subject to high loads The wire-tying machine (Art. No. 5006300) is available on page 49 40 SCHÜTZ SURFACE HEATING SYSTEMS

IC in cm System heating pipe approx m/m ² Pipe holder approx pieces System guide price ( /m 2, PG 01) duo-flex PE-Xa 20 x 2 mm duo-flex PE-Xa 25 x 2.3 mm Assembly time (guide time) Groups minutes/m ² 10 8.8 36 21.91 30.01 12.0 15 5.8 24 14.47 19.81 10.5 20 4.6 19 11.47 15.71 9.0 25 3.7 15 9.20 12.60 7.5 30 3.1 13 7.75 10.61 6.0 35 2.7 11 6.72 9.20 4.0 40 2.3 10 5.79 7.91 3.0 The system guide price quoted contains system heating pipe (pages 42-43) and pipe connector (see below) depending on installation clearance (IC). Industrial manifold Modular brass round pipe manifold 1 ½", made of high-quality brass Ms 63, dezincification-resistant. Modular design with flat-sealing 2" ÜM 2" AG 2" outer thread on one side and 2" union nut on the other side. Outlets with ¾" Euroconus connection, spacing 80 mm, ½" plugs in forward and return manifold for attaching a KFE valve, ball valve 48 80 50 130 mm in forward, regulator valve with preset to return, pressure-tested with a differential pressure test procedure, packed in boxes. The manifold modules can be screwed flat-sealed to one another in order to 190 mm correspondingly increase the number of outlets. heating circuits Length Article number Price/pieces Price group Type heating 1½" AG IV 2 2 178 mm 5001844 251.94 01 Type heating 1½" AG IV 3 3 258 mm 5001845 318.82 01 Type heating 1½" AG IV 4 4 338 mm 5001846 385.11 01 Type heating 1½" AG IV 5 5 418 mm 5001847 456.59 01 Type heating 1½" AG IV 6 6 498 mm 5001848 523.48 01 Bracket holder set 5000784 135.80 01 Pipe connector 1163078 0.11 01 Ball valve set 5000780 152.85 01 End cap set with KFE valve 5001850 34.03 01 Retrofit kit for single-room control Plan actuator separately 4037942 74.85 01 1. 1. AG 2" flat sealing 2. Breather and discharge valves 3. Manifold end cap 4. Ball valve with ¾" Euroconus connection 5. Backflow valve, adjustable and lockable with ¾" Euroconus connection. Further information on request. SCHÜTZ SURFACE HEATING SYSTEMS 41

SCHÜTZ System heating pipes System components 5-layer plastic safety heating pipes duo-flex PE-Xa Manufactured according to DIN EN 15875, impervious to oxygen diffusion according to DIN 4726 Cross-linked polyethylene PE-Xa (peroxide linked) Technical data duo-flex PE-Xa Max. operating temperature 95 C Max. operating pressure 6 bar Bending radius 5 x d Thermal expansion coefficient 1.4 x 10-4 K -1 The permitted continuous temperatures for the respective operating pressures will be found in the technical information. NEW Pipe identifier Pipe dimensions (A x B x C*) Article number Packaging unit Packaging unit/pallet Price ( /m, PG 01) 12 x 1.5 mm duo-flex PE-Xa (R50 ) 780 x 440 x 80 3028210 120 m/roll 2,040 m 1.57 780 x 440 x 150 3028213 240 m/roll 4,080 m 1.57 780 x 440 x 370 3028215 600 m/roll 2,400 m 1.57 14 x 2.0 mm duo-flex PE-Xa 780 x 440 x 80 3006737 120 m/roll 2,040 m 1.60 780 x 440 x 150 3006738 240 m/roll 2,400 m 1.60 780 x 440 x 370 3006739 600 m/roll 1,800 m 1.60 16 x 2.0 mm duo-flex PE-Xa 780 x 440 x 110 3002647 120 m/roll 2,040 m 1.62 780 x 440 x 200 3002652 240 m/roll 2,400 m 1.62 780 x 440 x 480 3002654 600 m/roll 1,800 m 1.62 17 x 2.0 mm duo-flex PE-Xa 780 x 440 x 110 3002655 120 m/roll 2,040 m 1.77 780 x 440 x 210 3002656 240 m/roll 2,400 m 1.77 780 x 440 x 350 3076841 400 m/roll 2,400 m 1.77 780 x 440 x 500 3002660 600 m/roll 1,800 m 1.77 20 x 2.0 mm duo-flex PE-Xa 780 x 440 x 160 3006778 120 m/roll 1.440 m 2.04 900 x 440 x 500 3006780 600 m/roll 1,800 m 2.04 25 x 2.3 mm duo-flex PE-Xa 795 x 440 x 370 3028901 200 m/roll 800 m 2.96 810 x 440 x 510 3084825 300 m/roll 900 m 2.96 42 SCHÜTZ SURFACE HEATING SYSTEMS

Metal composite safety heating pipe Non-cross-linked heating pipe plastic 5-layer plastic safety heating pipe tri-o-flex duo-flex PE-RT duo-flex Klett PE-Xa Diffusion-proof metal composite pipe, PE/AL/PE, impervious to oxygen diffusion According to DIN 16833, impervious to oxygen diffusion according to DIN 4726 of non-cross-linked polyethylene PE-RT According to DIN EN 15875, impervious to oxygen diffusion according to DIN 4726 of crosslinked polyethylene PE-Xa (peroxide linked) Technical data tri-o-flex duo-flex PE-RT duo-flex Klett Max. operating temperature 90 C 60 C 90 C Max. operating pressure 6 bar 3 bar 4 bar Bending radius 3 x d/5 x d with/without bending aid 5 x d 5 x d Coefficient of thermal expansion 2.3 x 10-5 K -1 1.95 x 10-4 K -1 1.4 x 10-4 K -1 Pipe identifier Pipe dimensions (A x B x C*) Article number Packaging unit Packaging unit/pallet Price ( /m, PG 01) 14 x 2.0 mm tri-o-flex 780 x 500 x 150 3002687 200 m/roll 2,400 m 2.24 780 x 450 x 310 3039264 500 m/roll 2,500 m 2.24 16 x 2.0 mm tri-o-flex 780 x 450 x 150 3002688 200 m/roll 2,400 m 2.32 780 x 450 x 500 3008496 500 m/roll 1,500 m 2.32 16 x 2.0 mm duo-flex PE-RT 780 x 440 x 190 5000190 240 m/roll 2,160 m 1.52 780 x 440 x 470 1157876 600 m/roll 1,800 m 1.52 17 x 2.0 mm duo-flex PE-RT 780 x 470 x 250 5000191 240 m/roll 1,680 m 1.66 800 x 440 x 500 1157701 600 m/roll 1,800 m 1.66 16 x 1.8 mm duo-flex PE-Xa (Klett) 780 x 440 x 700 3074001 600 m/roll 1,800 m 2.34 17 x 2.0 mm duo-flex PE-Xa (Klett) 780 x 440 x 250 3074002 240 m/roll 2,400 m 2.49 780 x 440 x 600 3074003 600 m/roll 1,800 m 2.49 * A = external diameter, B = core diameter, C = width SCHÜTZ SURFACE HEATING SYSTEMS 43

SCHÜTZ Additional heat insulation PUR and EPS. Additional heat insulation PUR E Heat insulation of rigid polyurethane foam PUR 023 DEO i.e. according to EN 13165, quality-monitored, with upper and lower aluminium cover layer, blunt edge, fire behaviour according to E (EN 13501-1), λ = 0.022 W/mK Additional heat insulation EPS DEO Heat insulation of hard, expanded polystyrene rigid foam EPS DEO 100/035 according to EN 13163, quality-monitored, blunt edge, fire behaviour according to E (EN 13501-1), λ = 0.034 W/mK Additional thermal & impact sound insulation EPS-T Heat and impact sound insulation of expanded polystyrene rigid foam EPS-T according to EN 13163, quality-monitored, blunt edge, fire behaviour according to E (EN 13501-1) Technical data PUR E Type E20* PUR E Type E30* PUR E Type E40* PUR E Type E52* Rated value (heat transfer resistance) R D =0.90 m 2 K/W R D =1.36 m 2 K/W R D =1.81 m 2 K/W R D =2.36 m 2 K/W Panel thickness dn = 20 mm dn = 30 mm dn = 40 mm dn = 52 mm Panel size 1,200 x 600 mm 1,200 x 600 mm 1,200 x 600 mm 1,200 x 600 mm Max. compressive stress at 10 % compression 100 kpa (acc. to EN 13165) 100 kpa (acc. to EN 13165) 100 kpa (acc. to EN 13165) 100 kpa (acc. to EN 13165) Article number 5004092 5004093 5004094 5004095 18.00 m 2 11.52 m 2 8.64 m 2 7.20 m 2 /pallet 180 m 2 115.20 m 2 86.40 m 2 72.00 m 2 Price group 02 02 02 02 Price/m 2 19.41 22.88 26.77 31.52 * These items are delivered depending on availability. 44 SCHÜTZ SURFACE HEATING SYSTEMS

Technical data EPS DEO Type 20 EPS DEO Type 30 EPS DEO Type 40 EPS DEO Type 50 Rated value (heat transfer resistance) R D =0.59 m 2 K/W R D =0.88 m 2 K/W R D =1.18 m 2 K/W R D =1.47 m 2 K/W Panel thickness dn = 20 mm dn = 30 mm dn = 40 mm dn = 50 mm Panel size 1,000 x 500 mm 1,000 x 500 mm 1,000 x 500 mm 1,000 x 500 mm Max. compressive stress at 10 % compression 100 kpa (acc. to EN 13163) 100 kpa (acc. to EN 13163) 100 kpa (acc. to EN 13163) 100 kpa (acc. to EN 13163) Article number 4001190 4001191 4005650 4005651 12.00 m 2 8.00 m 2 6.00 m 2 5.00 m 2 /pallet 120.00 m 2 80.00 m 2 60.00 m 2 50.00 m 2 Price group 02 02 02 02 Price/m 2 5.04 7.59 10.14 12.54 Technical data EPS-T Type 20-2 (DES sg) EPS-T Type 25-2 (DES sg) EPS-T Type 30-3 (DES sm) ÖNORM B 6000: EPS-T 650 B 6000: EPS-T 650 B 6000: EPS-T 650 Rated value (heat transfer resistance) R D =0.46 m 2 K/W R D =0.57 m 2 K/W R D =0.68 m 2 K/W Thermal conductivity λ D 0.044 W/mK 0.044 W/mK 0.044 W/mK Dynamic stiffness SD 30 SD 20 SD 20 Impact sound reduction ΔL w,r 27 db** 29 db** 29 db** Panel thickness dl-c = 18 mm dl-c = 23 mm dl-c = 27 mm Panel size 1,000 x 500 mm 1,000 x 500 mm 1,000 x 500 mm Max. load capacity 5* kpa (acc. to EN 13163) 5* kpa (acc. to EN 13163) 4* kpa (acc. to EN 13163) Article number 4001181 4001187 4001188 11.00 m 2 8.50 m 2 7.00 m 2 /pallet 110.00 m 2 85.00 m 2 70.00 m 2 Price group 02 02 02 Price/m 2 2.65 3.20 3.86 * maximum working load according to EN 13163 ** with screed, according to DIN 4109-34: 2016-07 Part 2 with m 120 kg/m² SCHÜTZ SURFACE HEATING SYSTEMS 45

Edge insulation strips Made of PE foam. Edge insulation strips PE-F For cement and floating screed with stapler panels and dry construction panels of closed-cell polyethylene foam, with a membrane skirt welded to the side and prepared tear perforation, according to DIN 18560. Edge insulation strips Rear self-adhesive (Type PE-B) For cement and floating screed and all system panels of closed-cell polyethylene foam, with an extra-wide membrane skirt welded to the side and prepared tear perforation, according to DIN 18560. Type PE-F Type PE-B Article number 1163310 1163272 5000752 5004102 Dimensions (height x thickness) 160 x 8 mm 180 x 10 mm 160 x 8 mm 160 x 10 mm (roll of 25 m) 100 m 100 m 100 m 100 m Price group 01 01 01 01 Price/m 0.76 0.97 1.03 1.05 46 SCHÜTZ SURFACE HEATING SYSTEMS

Edge insulation strips R50 (Type PE-B) For cement and floating screed and all system panels of closed-cell polyethylene foam, with extra-wide membrane skirt welded to the side, self-adhesive rear and prepared tear perforation, according to DIN 18560. Edge insulation strips Rear & membrane skirt self-adhesive (Type PE-B) For cement and floating screed and all system panels of closed-cell polyethylene foam, with welded self-adhesive membrane skirt and self-adhesive rear. Spring-Edge insulation strips Orange Klett system For cement and floating screed and all system panels of closed-cell polyethylene foam, self-adhesive with support spring for secure assembly. self-adhesive (Type PE-B) R50 Orange Klett system Article number 5005777 5002603 5001370 Dimensions (height x thickness) 150 x 8 mm 100 x 10 mm 80 x 8 mm (roll of 25 m) 100 m 100 m 100 m Price group 01 01 01 Price/m 1.09 1.03 1.85 SCHÜTZ SURFACE HEATING SYSTEMS 47

Tools For a professional result. For grid mat clips Steadying rest For steadying the heat pipe bracket (art. no. 3028812) on grid mats with 3 mm thickness. Article number 3030265 Dmr.14 to 32 mm Pipe-cutter For burr-free, right-angle trimming of the heating pipes. Article number 1180258 1 piece 1 piece Price group 03 Price/pieces 362.09 Price group 03 Price/pieces 37.72 14, 16, 17, 18 and 20 x 2 mm Calibrator with deburrer Main body is a plastic block surmounted by calibration and deburring pieces for various pipe dimensions. Article number 1180215 For expansion joint profile Notching pliers Article number 5005339 1 piece 1 piece Price group 03 Price/pieces 88.46 Price group 03 Price/pieces 46.76 14, 16, 17, 20 and 25 mm Compression jaws 14 mm 16 mm 17 mm 20 mm 25 mm Article number 1179969 1179977 1263161 1179993 5003632 1 piece 1 piece 1 piece 1 piece 1 piece Price group 03 03 03 03 03 Price/pieces 191.75 191.75 191.75 191.75 191.75 48 SCHÜTZ SURFACE HEATING SYSTEMS

"Orion Pipe dispenser Suitable for duo-flex and tri-o-flex heating pipes, for waste-free installation, demountable. Article number 3007086 1 piece Price group 03 Price/pieces 441.05 Foldable Pipe dispenser Suitable for duo-flex and tri-o-flex heating pipes, complete. Space requirement folded: 300 x 300 x 900 mm Space requirement unfolded: 1000 x 1000 x 900 mm Load capacity: max. 80 kg Article number 3065783 1 piece Price group 03 Price/pieces 675.35 Drum Pipe dispenser For adhesive tape up to 50 mm wide Hand dispenser Suitable for duo-flex and tri-o-flex heating pipes, for waste-free installation. Article number 3034818 Article number 1163787 1 piece 1 piece Price group 03 Price/pieces 954.50 Price group 03 Price/pieces 14.70 Practical Wire binding machine with accessories NEW Can be hired for a fee, please enquire. Wire binding machine Handle Binding wire 100 m Article number 5006300 5006301 5006302 1 piece 1 piece 1 piece Price group 03 03 01 Price/pieces 2,784.52 546.93 8.07 SCHÜTZ SURFACE HEATING SYSTEMS 49

Accessories General Self-adhesive Expansion joint profile 2.000 x 10 x 80 mm Article number 5001371 20 m Price group 01 Price/m 7.64 Angle profile, expansion strips R50 expansion joint profile With double adhesive tape, 2000 x 37 x 20 mm; for setting the PE expansion strip (to be ordered separately), made of closed-cell PE. Article & price information Angle profile Expansion strips Article number 5000905 5000906 2 m 2 m Price group 01 01 Price/m 6.69 1.63 Roll length 66 m, 50 mm wide Adhesive tape For sealing insulation surface joints, against screed ingress, white with printed SCHÜTZ, easily dispensed. Article number 7001670 PE-foam R50 protective tape 250 x 3 mm, self-adhesive, usage approx. 8 cm for each side of the heating pipe feed-through. Article number 1264214 6 pieces 25 m Price group 01 Price/pieces 4.48 Price group 01 Price/m 1.61 Plastic Clip rail For securely fastening heating pipes, grid spacing 50 mm, rail length 2 m. 12 mm heat pipe (R50 ) 14 mm heat pipe 16 & 17 mm heat pipe 20 mm heat pipe Article number 5002271 5001182 1163418 1163477 8 m 8 m 8 m 8 m Price group 01 01 01 01 Price/m 2.94 2.94 2.94 2.94 50 SCHÜTZ SURFACE HEATING SYSTEMS

For grid mats with 3 mm thickness Heating pipe bracket For fastening the SCHÜTZ duo-flex system heating pipes 17 x 2 mm on the system pipe carrier mat with steadying rest, art. no. 3030265). Grid mats available by request. Article number 3028812 Dmr. 35 x 30 mm Fastening support peg For fastening clip rails to heat insulation panels. Article number 1163027 500 pieces 50 pieces /box 12,500 pieces Price group 01 Price group 01 Price/pieces 0.25 Price/pieces 0.17 25/20, longitudinally cut Protective pipe For heat pipe feed-throughs in movement joints, length 300 mm, suitable for heating pipes up to dmr. 17 mm. Article number 5006190 1 roll á 50 m Price group 01 Price/pieces 2.06 25/20, longitudinally cut Protective pipe For heating pipe feed-throughs in movement joints, length 300 mm, suitable for heating pipes up to dmr. 17 mm. Article number 1163000 20 pieces á 300 mm Price group 01 Price/pieces 0.83 For humidity measurements Measuring point marking For marking a humidity measurement point. Requirement: at least 3 measuring points per 200 m² or per apartment. Article number 5002600 1 piece Price group 01 Price/pieces 5.88 SCHÜTZ SURFACE HEATING SYSTEMS 51

Accessories General With SCHÜTZ grid print Protective separating membrane Polyethylene, 0.2 mm, for protecting polystyrene insulation panels when laying bituminous sealing membranes or plasticized sealing membranes and as a protective layer, Roll length 50 m, strip width 1 m (Membrane without print, see page 38). PE 3/300 Moisture barrier Against rising damp, with integrated sealing edge, building materials class 2, roll length 40 m, sealing strip width 1.25 m (not for water under pressure). Article number 5004385 Article number 5000909 51 m 2 /roll 50 m 2 /roll Price group 01 Price/m 2 1.87 Price group 01 Price/m 2 6.62 Miscellaneous R 300 Sealing strip for moisture barrier Roll length 15 m, strip width 2 cm. System jointing strips for moisture barrier As A connecting strip between masonry barrier strip and moisture barrier, Roll length 25 m, 20 cm wide. Requirement: approx. 1 m/m² moisture barrier Article number 5000908 Article number 5000907 8 rolls 5 rolls Price group 01 Price/roll 42.24 Price group 01 Price/m 3.10 For moisture barrier Bitumen sealing and adhesive Article number 5002254 1 piece Price group 01 Price/pieces 12.90 52 SCHÜTZ SURFACE HEATING SYSTEMS

Screed additive For the perfect substrate. Screed additive* W 200 S To raise the quality of the screed through greater plasticity and improving the water retention capacity of hot cement screeds (not for floating or anhydrite screeds). Minimum screed coverage: 30 mm at 1.5 kn/m² or 45 mm at 5 kn/m² together with the insulation/system panel for 5 kn/m². Consumption with 7 cm screed thickness approx. 0.2 l/m 2. Curing time 21 days Screed additive* W 200 S-Tempo For plastersizing hot screeds and shortening the drying time. 1 % added to the cement portion: shortening the drying time by 50 %. Requirement for 65 mm screed thickness: approx. 0.15 kg/m² 2 % added to the cement portion: shortening the drying time by 75 %. Requirement for 65 mm screed thickness: approx. 0.30 kg/m² Minimum screed coverage: 30 mm at 2 kn/m² or 45 mm at 5 kn/m² together with the insulation/system panel for 5 kn/m². Article number 1163493 Article number 1163531 10 kg 10 kg Price group 01 Price/pieces 33.96 Price group 01 Price/pieces 121.67 * The exact requirement depends on the composition of the screed. Please calculate the exact version of additive according to the processing guidelines on the packaging. The material cannot be returned. SCHÜTZ SURFACE HEATING SYSTEMS 53

Dynomatic Manifold with automatic flow control. The flow rate of individual heating circuits is set using a scale for the self-regulating heating manifold. Hydraulic compensation is handled in a single move. The set flow rate set is adjusted continuously, i.e. in the event of oversupply, e.g. caused by neighbouring circuits closing, the self-regulating heating manifold automatically adjusts the flow rate to the value set. The control cartridge ensures a constant flow rate at all times. Self-regulating heating manifolds are therefore a time- and cost-saving solution, even during commissioning. 54 SCHÜTZ SURFACE HEATING SYSTEMS

For surface heating and cooling systems, stainless steel manifold stems, easy to assemble, flat-sealing connection technology, manifold with 1" external thread on one side for system connection on right, left or on alternate sides, draining and vent fitting integrated in the manifold stems. Stainless steel Manifold type Dynomatic Consisting of: Feed manifold DN 25 with integrated, closable flow meters 0.1 5 l/min Return manifold DN 25 with integrated, closable fine-control valves for adjusting the flow of heat transfer agent, hand wheel protective cap and adapter thread for mounting the actuator Clamp connectors ¾" for connecting heating pipes must be ordered separately. The brackets for the manifold are already included, ready to use in the manifold cabinets. Only in the case of wall mounting must brackets be ordered separately. Marking plates included Article & priceinfos 2 heating circuits 3 heating circuits 4 heating circuits 5 heating circuits 6 heating circuits 7 heating circuits 8 heating circuits Article number 4037250 4037251 4037252 4037253 4037254 4037255 4037256 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece Length 170 mm 220 mm 270 mm 320 mm 370 mm 420 mm 470 mm Price group 01 01 01 01 01 01 01 Price/pieces 265.46 335.65 407.08 480.07 551.55 622.88 694.47 Article & priceinfos 9 heating circuits 10 heating circuits 11 heating circuits 12 heating circuits Article number 4037257 4037258 4037259 4037260 1 piece 1 piece 1 piece 1 piece Length 520 mm 570 mm 620 mm 670 mm Price group 01 01 01 01 Price/pieces 766.21 837.69 909.28 980.76 Please plan the varimatic Classic actuator (230 V, art. no. 5006314, 24 V, art. no. 5006313) for this manifold, see page 75. SCHÜTZ SURFACE HEATING SYSTEMS 55

Heating circuit manifold Connection technology with convenience. For underfloor heating and cooling systems, manifold stem of stainless steel, easy to assemble, flatsealing connection technology, manifold with 1" external thread for system connection on one side, optionally right/left or alternate sides, draining and vent fitting Integrated into the manifold stem. Stainless steel manifold type Comfort 90-3 Consisting of: Feed manifold DN 25 with integrated, closable flow meters 0.1 5 l/min Return manifold DN 25 with integrated, closable fine-control valves for adjusting the flow of heat transfer agent, hand wheel protection and adapter thread for mounting the actuator Ball valves are not included and must be ordered separately Clamp connectors ¾" for connecting heating pipes must be ordered separately. The brackets for the manifold are already included, ready to use in the manifold cabinets. Only in the case of wall mounting must brackets be ordered separately. Marking plates included Article & priceinfos 2 heating circuits 3 heating circuits 4 heating circuits 5 heating circuits 6 heating circuits 7 heating circuits 8 heating circuits Article number 3053410 3053411 3053412 3053413 3053414 3053415 3053416 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece Length 170 mm 220 mm 270 mm 320 mm 370 mm 420 mm 470 mm Price group 01 01 01 01 01 01 01 Price/pieces 132.39 174.01 199.95 233.39 266.83 300.26 338.49 Article & priceinfos 9 heating circuits 10 heating circuits 11 heating circuits 12 heating circuits 13 heating circuits 14 heating circuits Article number 3053417 3053418 3053419 3053420 3053421 3053422 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece Length 520 mm 570 mm 620 mm 670 mm 720 mm 770 mm Price group 01 01 01 01 01 01 Price/pieces 372.62 406.74 442.90 477.70 493.53 526.77 56 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories Accessories Heating circuit manifold For manifold Bracket set Made of galvanised flat steel, with rail suspension and fixing screw as well as sound-insulated pipe clamps for holding the forward and return manifolds DN 25. Article number 5004824 1 piece Price group 01 Price/pieces 12.97 Nickel-plated Installation set for heat meters Easy to assemble, compact construction, option for fitting to heat meter G ¾". - installed length 110 mm and G 1" - installed length 130 mm, sealable cap nut for heat meter, for direct immersion sensors (M10 x 1) in the forward and return lines with 3 ball valves vertical installation horizontal installation Article number 5004072 5004073 1 piece 1 piece Price group 01 01 Price/pieces 86.89 81.05 Nickel-plated Ball valve set 1" IG/1" IG (Cap nut) Consisting of forward and return line ball valves of brass, matching the each circuit manifold with T-handle including seals. Standard Standard with thermometer Vertical Article number 5000732 5004132 5004111 1 piece 1 piece 1 piece Price group 01 01 01 Price/pieces 37.24 72.28 55.73 SCHÜTZ SURFACE HEATING SYSTEMS 57

Accessories Heating circuit manifold Stainless steel Manifold extension set 1" Consisting of forward and return line extension, convenient, stainless steel manifold. Nickel-plated Miniature ball valve For connection to manifold outlets with ¾" Euroconus. Article number 3058303 Article number 5004118 1 piece 1 piece Price group 01 Price/pieces 177.07 Price group 01 Price/pieces 20.08 Nickel-plated Return line thermometer For connection to manifold outlets with ¾" Euroconus. Article number 5004133 Brass Manifold overflow set For fitting to the manifold, adjustable pressure difference 0.05 0.35 bar. Article number 1258095 1 piece 1 piece Price group 01 Price/pieces 32.86 Price group 01 Price/pieces 114.28 Brass Circuit control valve set 1" Consisting of circuit control valve with integrated flow meter and ball valve. For adjusting and shutting off heat manifolds. Display range: 4-36 l/min, kvs value 3.5 m 3 /h Article number 5000736 For Underfloor heating Systems Differential pressure regulator Automatic differential pressure regulator independent of pressure fluctuations, incl. flow valve with impulse line. Please plan ball valve separately. When using as a zone valve, please plan actuator (p. 75) separately. PV 20 PV 25 Article number 5006293 5006294 1 piece 1 piece 1 piece Price group 01 Price/pieces 141.95 Price group 01 01 Price/pieces 274,30 374,04 58 SCHÜTZ SURFACE HEATING SYSTEMS

Brass Zone regulation set 1" Zone regulation set for SCHÜTZ heating circuit manifold comprising straight-way valve kvs 4.5 m³/h, actuator and ball valve set. 230 V 24 V Article number 3082628 3082627 1 piece 1 piece Price group 01 01 Price/pieces 120.40 120.40 Brass Clamped connector adapter ¾" Suitable for manifolds, consisting of: support sleeve, clap ring and cap nut. 12 x 1.5** 14 x 2* 16 x 1.8* 16 x 2* 17 x 2* 20x 2* 25 x 2.3* 14 x 2* 16 x 2* Article number 5002272 1159887 5005630 1159933 1159895 1159909 5001340 1178083 1178091 Heat pipe type Plastic pipe Metal composite pipe (with O-ring) 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces /box 200 pieces 200 pieces 200 pieces 200 pieces 200 pieces 200 pieces 50 pieces 200 pieces 200 pieces Price group 01 01 01 01 01 01 01 01 01 Price/pieces 2.58 2.76 2.93 2.93 2.93 3.13 12.95 3.22 3.22 Brass Pipe coupling (with clamped connection) For connecting heating pipes securely. 12 x 1.5** 14 x 2* 16 x 1.8* 16 x 2* 17 x 2* 20x 2* 25 x 2.3* 14 x 2* 16 x 2* Article number 5002273 1159658 5005631 1159712 1159666 1159682 5001191 5000121 1159704 Heat pipe type Plastic pipe Metal composite pipe (with O-ring) 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces /box 100 pieces 100 pieces 100 pieces 100 pieces 100 pieces 100 pieces 100 pieces 100 pieces 100 pieces Price group 01 01 01 01 01 01 01 01 01 Price/pieces 8.52 9.12 9.34 9.34 9.34 9.65 12.59 9.44 9.65 * in mm ** R50, mm SCHÜTZ SURFACE HEATING SYSTEMS 59

Accessories Heating circuit manifold Brass Screwed connection joint (with clamped connection) For connection to fittings. 12 x 1.5** 14 x 2* x ½" 16 x 2* x ½" 17 x 2* x ½" 20 x 2* x ½" 14 x 2* x ½" 16 x 2* x ½" Article number 5002743 1181114 1159798 1159720 1159747 1179365 1179373 Heat pipe type AG plastic pipe AG metal composite pipe (with O-ring) 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces /box 200 pieces 150 pieces 150 pieces 150 pieces 100 pieces 150 pieces 150 pieces Price group 01 01 01 01 01 01 01 Price/pieces 5.48 5.82 5.98 5.98 6.07 6.07 6.07 Brass Pipe coupling Non-separable with radial compression, incl. 2 stainless steel compression sleeves. 14 x 2* 16 x 2* 17 x 2* 20 x 2* 25 x 2.3 Article number 1177869 1177877 1221752 1177958 5003630 Heat pipe type Plastic and metal composite pipe 10 pieces 10 pieces 10 pieces 10 pieces 5 pieces /box 200 pieces 200 pieces 150 pieces 150 pieces 80 pieces Price group 01 01 01 01 01 Price/pieces 8.30 8.44 8.44 8.90 12.99 * in mm ** in mm. double nipple to ½" (R 50 ) (also arrange for 5002272) 60 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories Manifold cabinets Plastic Heating pipe guide curve 90 As protection at floor break-throughs and manifold inlets for heating pipes in the following sizes. 12 mm dmr. (R50 ) 14-17 mm dmr. 20 mm dmr. 25 mm dmr. Article number 5002270 5000793 5000794 5001190 20 pieces 20 pieces 20 pieces 20 pieces Price group 01 01 01 01 Price/pieces 1.72 1.79 2.43 5.56 For wall cabinet Manifold lock Including key, suitable for the cabinets. Article number 1160656 1 piece Price group 01 Price/pieces 19.36 SCHÜTZ SURFACE HEATING SYSTEMS 61

SCHÜTZ Manifold cabinets Surface mounted (AP) & flush mounted (UP). In only a few steps, the manifold cabinets can be adjusted for a wide range of building site situations. Fast, tidy installation of the selected components is insured, and with that the system security. Available in versions for the Comfort 90-3 UP 90 AP 90 & AP 140 UP 90 Series 4 flush-mounting/surface mounting with variable installation depth between 90 and 140 mm, consisting of: Strong, hot-galvanised steel sheet housing Side walls each fitted with 2 pre-stamped feed-throughs Height adjustable feet with internal wing nuts Rear wall with lower stabilisation edge Installation rail (top-hat rail) for easy clip-fitting of the varimatic base and extension modules 2 Fastening rails for variable bracket arrangement Pre-assembled manifold bracket set with manifold clamps and sound-insulated construction Deflection pipe for careful heat pipe guidance integrated into the screed plate Adjustable frame and front flap with recessed lock, powder-coated, similar to RAL 9010 Frame and front flap in additional corrugated cardboard protective packaging Construction protection cover Technical data Type UP 90-0 Type UP 90-1 Type UP 90-2 Type UP 90-3 Type UP 90-4 Height in mm 770 910 770 910 770 910 770 910 770 910 Width in mm 470 670 870 1.070 1.370 Depth in mm 90 140 90 140 90 140 90 140 90 140 Article number 5004860 5004861 5004862 5004863 5004864 1 piece 1 piece 1 piece 1 piece 1 piece Price group 01 01 01 01 01 Price/pieces 163.52 170.59 189.71 218.37 263.09 62 SCHÜTZ SURFACE HEATING SYSTEMS

AP 90 & AP 140 series for surface mounting with low installation height of only 90 mm or of 140 mm, completely powder-coated similar to RAL 9010, consisting of: Strong, hot-galvanised steel sheet housing 2 Fastening rails for variable bracket Removable rear wall with lower arrangement stabilisation edge Removable screed protection plate Installation rail (top-hat rail) for easy clip-fitting of the varimatic base and extension modules Front flap with recessed lock Pre-assembled manifold bracket set with manifold clamps with sound-insulated construction Technical data Type AP 90-0 Type AP 90-1 Type AP 90-2 Type AP 90-3 Type AP 90-4 Dimensions ( heating circuits) in mm 690 x 490 x 90 690 x 690 x 90 690 x 890 x 90 690 x 1,090 x 90 690 x 1,390 x 90 Article number 5004850 5004851 5004852 5004853 5004854 1 piece 1 piece 1 piece 1 piece 1 piece Price group 01 01 01 01 01 Price/pieces 156.93 163.78 180.15 211.56 249.43 Technical data Type AP 140-0 Type AP 140-1 Type AP 140-2 Type AP 140-3 Type AP 140-4 Dimensions (H x W x D) in mm 690 x 490 x 140 690 x 690 x 140 690 x 890 x 140 690 x 1,090 x 140 690 x 1,390 x 140 Article number 5004855 5004856 5004857 5004858 5004859 1 piece 1 piece 1 piece 1 piece 1 piece Price group 01 01 01 01 01 Price/pieces 187.25 204.71 232.02 259.32 315.82 SCHÜTZ SURFACE HEATING SYSTEMS 63

SCHÜTZ manifold Installation versions Versions Ball valve set (KHS) vertical standard Article information Ball valve set vertical Ball valve set standard Article number 5004111 5000732 Length in mm 140 50 Heating circuit manifold Length Installed length* KHS vertical UP AP 90+140 KHS standard UP AP 90+140 2 heating circuits 170 230 370 90-0 0 280 90-0 0 3 heating circuits 220 280 420 90-0 0 330 90-0 0 4 heating circuits 270 330 470 90-1 0 380 90-0 0 5 heating circuits 320 380 520 90-1 1 430 90-0 0 6 heating circuits 370 430 570 90-1 1 480 90-1 1 7 heating circuits 420 480 620 90-1 1 530 90-1 1 8 heating circuits 470 530 670 90-2 1 580 90-1 1 9 heating circuits 520 580 720 90-2 2 630 90-1 1 10 heating circuits 570 630 770 90-2 2 680 90-2 2 11 heating circuits 620 680 820 90-2 2 730 90-2 2 12 heating circuits 670 730 870 90-3 2 780 90-2 2 13 heating circuits 720 780 920 90-3 3 830 90-2 2 14 heating circuits 770 830 970 90-3 3 880 90-3 2 Now available Pre-assembled manifold cabinets from SCHÜTZ The example includes: flush-mounted manifold cabinet, series ST/820, heating circuit manifold, stainless steel Comfort 90-3 with bracket set, circuit regulation valve set, heat meter installation set, cold and hot water installation section. We would be pleased to assemble your version by request. Type Cabinet type Name H (mm) W (mm) D (mm) Number of HC UP-WMZ-WZ-ABQM ST 850/820 UP 90-3 820 900 790 115 175 7 * Incl. 2 x 30 mm assembly spacing 64 SCHÜTZ SURFACE HEATING SYSTEMS

Versions Circuit regulation valve (SGV) set Differential pressure regulator PV 25 Article information Circuit control valve set Differential pressure regulator PV 25 Article number 5000736 5002220 Length in mm 75 200 (horizontal only) Heating circuit manifold Length Installed length* SGV Set UP AP 90+140 Differential pressure regulator UP AP 90+140 2 heating circuits 170 230 305 90-0 0 430 90-0 0 3 heating circuits 220 280 355 90-0 0 480 90-1 0 4 heating circuits 270 330 405 90-0 0 530 90-1 1 5 heating circuits 320 380 455 90-0 0 580 90-1 1 6 heating circuits 370 430 505 90-1 1 630 90-1 1 7 heating circuits 420 480 555 90-1 1 680 90-2 1 8 heating circuits 470 530 605 90-1 1 730 90-2 2 9 heating circuits 520 580 655 90-1 1 780 90-2 2 10 heating circuits 570 630 705 90-2 2 830 90-2 2 11 heating circuits 620 680 755 90-2 2 880 90-3 2 12 heating circuits 670 730 805 90-2 2 930 90-3 3 13 heating circuits 720 780 855 90-2 2 980 90-3 3 14 heating circuits 770 830 905 90-3 3 1,030 90-3 3 SCHÜTZ SURFACE HEATING SYSTEMS 65

SCHÜTZ manifold Installation versions Versions Heat meters (WMZ) vertical horizontal Article information Heat meters vertical Heat meters horizontal Article number 5004072 5004073 Length in mm 120 260 Heating circuit manifold Length Installed length* Heat meter vertical UP AP 140 Heat meter horizontal UP AP 140 2 heating circuits 170 230 370 90-0 0 490 90-1 1 3 heating circuits 220 280 420 90-0 0 540 90-1 1 4 heating circuits 270 330 470 90-1 0 590 90-1 1 5 heating circuits 320 380 520 90-1 1 640 90-1 1 6 heating circuits 370 430 570 90-1 1 690 90-2 2 7 heating circuits 420 480 620 90-1 1 740 90-2 2 8 heating circuits 470 530 670 90-2 1 790 90-2 2 9 heating circuits 520 580 720 90-2 2 840 90-2 2 10 heating circuits 570 630 770 90-2 2 890 90-3 3 11 heating circuits 620 680 820 90-2 2 940 90-3 3 12 heating circuits 670 730 870 90-3 2 990 90-3 3 13 heating circuits 720 780 920 90-3 3 1,040 90-3 3 14 heating circuits 770 830 970 90-3 3 1,090 90-4 4 * Incl. 2 x 30 mm assembly spacing 66 SCHÜTZ SURFACE HEATING SYSTEMS

Versions Regulation station (RS) standard standard + heat meter, horizontal (WMZ-w) Article information Regulation station manifold-extension set (optional) Manifold overflow set (optional) Article number 4036942 3058303 1258095 Length in mm 220 80 40 Heating circuit manifold Length Installed length* RS standard UP AP 140 RS standard + WMZ-w UP AP 140 2 heating circuits 170 230 450 90-0 0 710 90-2 2 3 heating circuits 220 280 500 90-1 1 760 90-2 2 4 heating circuits 270 330 550 90-1 1 810 90-2 2 5 heating circuits 320 380 600 90-1 1 860 90-2 2 6 heating circuits 370 430 650 90-1 1 910 90-3 3 7 heating circuits 420 480 700 90-2 2 960 90-3 3 8 heating circuits 470 530 750 90-2 2 1,010 90-3 3 9 heating circuits 520 580 800 90-2 2 1,060 90-3 3 10 heating circuits 570 630 850 90-2 2 1,110 90-4 4 11 heating circuits 620 680 900 90-3 3 1,160 90-4 4 12 heating circuits 670 730 950 90-3 3 1,210 90-4 4 13 heating circuits 720 780 1,000 90-3 3 1,260 90-4 4 14 heating circuits 770 830 1,050 90-3 3 1,310 90-4 4 SCHÜTZ SURFACE HEATING SYSTEMS 67

varimatic regulation technology Wireless or wired. The new generation of single-room regulation stands for maximum convenience and energyefficiency in underfloor heating. Simple, and universally applicable for energy efficiency and user convenience of the highest level For various heat sources and customer-specific system solutions Can also be controlled by PC/smart phone Available as wireless or BUS solution All the components are optimally matched Base module description: For the central information processing and wireless communication with all system components. Management of measurements for an individual, energy-efficient temperature regulation in every room. Modifications and updates are done through the MicroSD card slot. In the Ethernet version, the regulation of individual rooms can also be controlled by PC/smartphone or through the Internet. Operating modes: frost protection, heating, cooling, eco, automatic Pilot function for heating and cooling Integrated, parameterisable pump module, boiler outlet, STB connection, pump protection function Multi-storey solution (coupling of up to 7 base stations) 68 SCHÜTZ SURFACE HEATING SYSTEMS

System components Wireless. Wireless varimatic Base module BUS Technical data 4 zones 4 Ethernet zones 8 zones 8 Ethernet zones 12 zones 12 Ethernet zones For 6 x acuators 24 V, NC, with external transformer For 12 x acuators 24 V, NC, with external transformer For 18 x acuators 24 V, NC, with external transformer Article number 5004791 5004792 5004793 5004794 5004795 5004796 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece Price group 01 01 01 01 01 01 Price/pieces 355.75 445.52 423.50 512.85 494.98 582.26 Wireless analogue varimatic Room regulator BUS The temperature control unit of the SCHÜTZ BUS regulator. Accurate temperature detection for maximum user comfort. The setting of the desired room temperature and the associated zone is done conveniently by means of a rotary knob with a fine setting and a scale that is always easy to read. With the tab underneath the rotary knob, the possible range of settings is restricted, and a set value comparison carried out. Optimum price/performance ratio Patented set-value comparison Setting range 10... 28 C Flat construction and low dimensions (86 x 86 mm) Rotary knob with 1/4-degree soft-clicking Optionally with limitation of the settable range of room temperatures to a maximum and/or minimum value Reliable 868 MHz radio technology for optimum positioning without the use of wiring Wireless Article number 5004788 1 piece Price group 01 Price/pieces 84.37 SCHÜTZ SURFACE HEATING SYSTEMS 69

System components Wired. Wired varimatic Base module BUS Technical data 8 zones 8 Ethernet zones For 12 x acuators 24 V, NC, with external transformer Article number 5004789 5004790 1 piece 1 piece Price group 01 01 Price/pieces 423.50 512.85 Wired analogue varimatic Room regulator BUS analogue The temperature control unit of the SCHÜTZ BUS regulator. Accurate temperature detection for maximum user comfort. The setting of the desired room temperature and the associated zone is done conveniently by means of a rotary knob with a fine setting and a scale that is always easy to read. With the tab underneath the rotary knob, the possible range of settings is restricted, and a set value comparison carried out. Optimum price/performance ratio Patented set-value comparison Setting range 10... 28 C Flat construction and small dimensions (86 x 86 mm) Rotary knob with 1/4-degree soft-clicking Optionally with limitation of the settable range of room temperatures to a maximum and/or minimum value Wired Article number 5004785 1 piece Price group 01 Price/pieces 84.37 70 SCHÜTZ SURFACE HEATING SYSTEMS

System components Wireless & Wired. Wired digital & wireless digital varimatic room regulator BUS digital The control unit with display provides access to all room-specific and system-specific parameters of the SCHÜTZ room regulator. It is used for accurate temperature registration for maximum user comfort. It is operated by means of a rotary knob with a turn/push mechanism and fine setting, along with a clear, language-neutral indication on the high-quality display. The SCHÜTZ room control unit is available in standard, remote sensing and infrared sensing versions. Flat construction and small dimensions (86 x 86 mm) Large, clear LC display (60 x 40 mm) of scratch-proof plastic Permanent display of room temperature, system time and operating status 3 Menu levels (lifestyle functions, parameters and service) Limitation of the settable range of room temperatures Convenient operation through the rotary knob (turn/press mechanism with fine, dynamic clicking) Setting range 5... 30 C Radio digital: 868 MHz radio technology for optimum positioning without the trouble of wiring Wired digital Wired Wired Article number 5004787 5005577 Remote sensor no yes 1 piece 1 piece Price group 01 01 Price/pieces 112.21 141.30 Wireless digital Wireless Wireless Article number 5004786 5005578 Remote sensor no yes 1 piece 1 piece Price group 01 01 Price/pieces 112.21 141.30 SCHÜTZ SURFACE HEATING SYSTEMS 71

Accessories varimatic Regulation technology. Electronic 2-point regulator varimatic Room regulator Precise regulation through pulse width modulation with thermal feedback, 2K temperature lowering by means of external signal, set value comparison, Dimensions 80 x 29 x 86 mm (HxWxL), Protection class IP20, Protection class 2 (230 V) / 3 (24 V). Digital varimatic Room regulator The SCHÜTZ LCD regulator 24 V or 230 V is a digital room temperature regulator for regulating the room temperature of floor heating systems, Dimensions 86 x 31 x 86 mm (HxWxL), Protection class IP20, Protection class 2 (230 V) / 3 (24 V). Operation through rotary knob Frost protection Set value calibration Additional convenience: Heating/cooling Valve protection function Operation through rotary knob Continuous display of the current room temperature 3 operating modes: convenient/lowering/automatic mode Valve protection function, frost protection Electronic thermostat with LCD display, specially for underfloor heating and cooling Precise regulation Mounted on the wall surface Additional convenience: Heating/cooling, display lighting, adjustable lowering of temperature Additional Control: Internal weekly timer, smart start/stop function, timer output Technical data Electronic, 230 V Electronic, 24 V Digital, 230 V Digital, 24 V Acuator 10 5 5 5 Switching capacity 15 W 15 W 15 W 15 W Article number Standard 5006002 5006000 5006006 5006004 NEW Comfort 5006001 5005999 5006005 5006003 Control 5006248 5006247 1 piece 1 piece 1 piece 1 piece Price group 01 01 01 01 Price/pieces Standard 21,82 27,27 56,63 56,63 Price/pieces Comfort 55,59 55,59 72,21 72,21 Price/pieces Control 101,82 101,82 72 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories varimatic Module. For the varimatic room regulator and acuator Base module 6 zones 230 V Standard: Connecting base, plug-in contacts, temperature lowering mode, connection of 6 room regulators and a maximum of 15 acuators, status signalling, sinking input. Extra for Comfort: Heating/cooling, pump and boiler control, dew-point sensor input*. Technical data Standard Comfort For the varimatic room regulator and acuator Base module 10 zones 230 V Standard: Connecting base, plug-in contacts, temperature lowering mode, connection of 10 room regulators and a maximum of 18 acuators, status signalling, sinking input. Extra for Comfort: Heating/cooling, pump and boiler control, dew-point sensor input*. Technical data Standard Comfort Dimensions (H x W x L) 90 x 52 x 327 mm Dimensions (H x W x L) 90 x 52 x 327 mm Article number 5005995 5005997 1 piece 1 piece /box 25 pieces 25 pieces Price group 01 01 Price/pieces 74.60 145.77 Article number 5005996 5005998 1 piece 1 piece /box 25 pieces 25 pieces Price group 01 01 Price/pieces 87.90 154.97 For the varimatic room regulator und acuator Base module 6 zones 24 V Connecting base, plug-in contacts, temperature lowering mode, connection of 6 room regulators and a maximum of 15 acuators, status signalling, sinking input. Extra for Comfort: Heating/cooling, pump and boiler control, dew-point sensor input*. 24 V incl. transformer Technical data Standard Comfort For the varimatic room regulator und acuator Base module 10 zones 24 V Connecting base, plug-in contacts, temperature lowering mode, connection of 10 room regulators and a maximum of 18 acuators, status signalling, sinking input. Extra for Comfort: Heating/cooling, pump and boiler control, dew-point sensor input*. 24 V incl. transformer Technical data Standard Comfort Dimensions (H x W x L) 90 x 52 x 408 mm Dimensions (H x W x L) 90 x 52 x 408 mm Article number 5006323 5005992 1 piece 1 piece /box 25 pieces 25 pieces Price group 01 01 Price/pieces 154.50 217.72 Article number 5006215 5005994 1 piece 1 piece /box 25 pieces 25 pieces Price group 01 01 Price/pieces 168.32 228.89 * Transducer dew-point monitor, art. no. 5001065 SCHÜTZ SURFACE HEATING SYSTEMS 73

Accessories varimatic EIB-System. varimatic EIB-Base module Connection base for varimatic EIB room regulator and a maximum of 13 varimatic acuators 24 V, extendable with pump module 24 V, 6 channels for 6 room regulators or 12 channels for 12 room regulators. 6 channel 12 channel Article number 5000862 5000941 varimatic EIB-Room regulator 24 V Constant room regulator with EIB technology. Article number 5000863 1 piece 1 piece 1 piece Price group 01 01 Price/pieces 1,006.65 1,383.36 Price group 01 Price/pieces 417.48 varimatic EIB-Driver module Plug-in channel extension of the varimatic base module, channel assignment through jumpers, 2 heating zones for 4 varimatic acuators each. varimatic EIB-Pump module Plug-in extension of the varimatic base module and the wireless base, floating relay contact 230 V/5 A AC for switching the pump off, when no room regulators are requesting heat, adjustable shut-off-delay 0, 5, 10 and 15 minutes, interval switching for summer operation. Technical data 24 V Technical data 24 V Dimensions (H x W x L) 70 x 75 x 88 mm Dimensions (H x W x L) 70 x 75 x 88 mm Article number 5000203 Article number 5000205 1 piece 1 piece /box 20 pieces /box 20 pieces Price group 01 Price/pieces 52.44 Price group 01 Price/pieces 85.66 74 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories varimatic varimatic Actuator "Energy-saver plus Closing force 100 N, for operation of The valve by means of 2-point signal, toolless, plug-in fitting through adapter ring, closed when not powered but open when delivered for easier assembly and commissioning, regulating distance 4 mm.* Technical data 230 V 24 V Protection class II Protection type IP54 IP54 Switch-on current 550 ma (max. 100 ms) 300 ma (max. 2 Min.) Operating power 1 W 1 W varimatic Actuator "Classic For use with the manifold type Dynomatic. Closing force 100 N, for operation of the valves by means of 2-point signal, toolless assembly via adapter ring, closed when not powered but open when delivered for easier assembly and commissioning, regulating distance 4 mm.* Technical data 230 V 24 V Protection class II Protection type IP 41 IP 41 Switch-on current 250 ma 350 ma Operating power 2 W 2 W Article number 5004134 5004135 1 piece 1 piece Price group 01 01 Price/pieces 33.87 33.87 Article number 5006314 5006313 1 piece 1 piece Price group 01 01 Price/pieces 33.87 33.87 varimatic Contact thermostat As a temperature monitor, fitted to the feed line by means of a strap, external adjustment 30 C to 90 C, changeover switch, switching capacity 15 A, 220 V. Please observe the applicable regulations. Article number 5000940 varimatic Manual regulation cap For regulating the room temperature manually by opening, closing or regulating the volume flow rate at the heating manifold return valve. Please observe the applicable regulations. Article number 5000880 1 piece 1 piece Price group 01 Price/pieces 29.39 Price group 01 Price/pieces 2.46 * You can ask separately if you require spare parts for all manifold types. SCHÜTZ SURFACE HEATING SYSTEMS 75

varimat Manifold regulation station varimat F & varimat WR. For the combination of surface and radiator heating systems. In this case, the underfloor heating usually requires lower heating-medium temperatures than the radiators. In many cases, however, a second heating circuit from the central heater is not provided and cannot be retrofitted, the reduction of the primary-side forward flow temperature is performed non-centrally. Available in versions varimat F varimat WR Manifold-Regulation station varimat F Fixed value regulation by setting a maximum value at the fixed value regulator Manifold-Regulation station varimat WR Weather-controlled regulation with and without inclusion of the room temperature Advantages: Cost saving of the additional, second temperature regulator at the heat generator for the low-temperature heating circuit Cost saving of the additional pipe lines between the heat generator and the FBH manifold Note: If heat is not being required by any of the connected room thermostats, the secondary pump should be switched off for hydraulic reasons. A bypass (overflow set, art. no. 1258095) between the secondary forward flow and return flow is also necessary. The applications described cannot take into account special conditions of individual cases, and are therefore made without liability. 76 SCHÜTZ SURFACE HEATING SYSTEMS

Accessories varimat Manifold regulation station. varimatic Control 230 V Weather-controlled regulation unit consisting of: 1 operating unit, 1 external temperature sensor and 1 forward flow temperature sensor with clamping spring. Article number 5001843 varimatic Small valve drive 230 V For regulators with switching output (3-point controller) Thrust 140 N Article number 5006030 1 piece 1 piece Price group 01 Price/pieces 377.03 Price group 01 Price/pieces 254.56 SCHÜTZ SURFACE HEATING SYSTEMS 77

Accessories varimat Manifold regulation station. varimat F Manifold regulation station Compact, pre-assembled basic unit made of brass ready for installation, Wilo Para RS 30/6, 1 1/2 pump. Installation length 130 mm, 3-way mixing valve with fixed-setpoint controller, pre-wired maximum temperature limiter, ball valve (feed flow) on secondary side incl. thermometer. Technical data varimat F Article number 4035247 Volume flow rate operating range Q at 3.3 m 3 /h Discharge head operating range Motor voltage Power consumption Protection class 6 m 1 x 230 V, 50 Hz 3 45 W IPX 4D Pump connection G 1½" Installed length 130 mm Media temperature +2 C to +110 C varimat WR Manifold regulation station Compact, pre-assembled basic unit made of brass ready for installation, Wilo Para RS 30/6, 1 1/2 pump. Installation length 130 mm, 3-way mixing valve for mounting the 230 V small valve drive, pre-wired maximum temperature limiter, ball valve (feed flow) on secondary side incl. thermometer. Please plan small valve drive separately (see p. 77). Technical data varimat WR Article number 4036942 Volume flow rate operating range Q at 3.3 m 3 /h Discharge head operating range Motor voltage Power consumption Protection class 6 m 1 x 230 V, 50 Hz 3 45 W IPX 4D Pump connection G 1½" Installed length 130 mm Media temperature +2 C to +110 C 78 SCHÜTZ SURFACE HEATING SYSTEMS