TRI-GLIDE 3 Point Load Moving Solution
FEATURES & BENEFITS The Hilman Tri-Glide provides a stable, efficient solution for moving heavy loads. It is designed with a large footprint to spread the weight of the load over a greater area. Our Polyurethane and Nylon rollers are non-marking and can be used on a variety of floor surfaces. The Tri-Glide low-profile keeps the load close to the ground for safe moving. Easy Maneuverability, Maintenance Friendly, Easy to Assemble, No Tools Required! 360-Degree Turntable with Non-Slip Swivel Pad for easy turning Steerable Front Unit Multifunctional Handle flipping action provides additional handle bar clearance to prevent steer binding Tow Latch can be pin locked or left free to articulate during maneuvering Low Height just 4 inches on 10,15 & 20 capacity units Wheel Options P-Poly N-Nylon S-Steel Non-Slip Pads Adjustable Rear Dollies for fitting under heavy loads with a range of widths Available in 10, 15, 20, 24, 40, 60 & 80 Ton Capacities! 3-Point Load Moving Solution The standard Tri-Glide includes a front steering unit and two rear adjustable units. The steerable front unit contains a 360-degree swiveling turntable that allows the rollers to rotate under the load, making pushing and pulling more precise. The rear dollies are kept aligned by an adjustable spreader bar, allowing them to track properly when moving. Placing the dollies in a 3-point configuration can stabilize the rollers and prevent them from slipping out, even under pulling and tugging forces. As the load is steered with the front unit, the rear dollies will follow, providing the user with a wide range of mobility. While the 3-point configuration is recommended as a safe load moving solution, additional modules can be added and reconfigured to further stabilize bulky loads. SPREADER BAR
10 TON CAPACITIES: KTG-10N KTG-10P KTG-10S Front Unit TG-F5N (TG-F5P TG-F5S) + Rear Unit TG-R5N (TG-R5P TG-R5S) + Pads Front Unit Weights: 96 lb / 44 kg Rear Unit Weights: 59 lb / 27 kg 15 TON CAPACITIES: KTG-15N KTG-15P KTG-15S Front Unit TG-F7.5N (TG-F7.5P TG-F7.5S) + Rear Unit TG-R7.5N (TG-R7.5P TG-R7.5S) + Pads Front Unit Weights: 106 lb / 48 kg Rear Unit Weights: 62 lb / 28 kg 20 TON CAPACITIES: KTG-20N KTG-20P KTG-20S Front Unit TG-F10N (TG-F10P TG-F10S) + Rear Unit TG-R10N (TG-R10P TG-R10S) + Pads Front Unit Weights: 113 lb / 51 kg Rear Unit Weights: 71 lb / 32 kg
24 TON CAPACITY: KTG-24P Front Unit TG-F12P + Rear Unit TG-R12P + Pads Front Unit TG-F12P Front Unit Weights: 249 lb / 113 kg Rear Unit Weights: 135 lb / 61 kg Rear Unit TG-R12P 40 TON CAPACITY: KTG-40P Front Unit TG-F20P + Rear Unit TG-R20P + Pads Front Unit TG-F20P Rear Unit TG-R20P Front Unit Weights: 286 lb / 130 kg Rear Unit Weights: 181 lb / 82 kg
60 TON CAPACITY: KTG-60P Front Unit TG-F30P + Rear Unit TG-R30P + Pads Front Unit TG-F30P Front Unit Weights: 603 lb / 274 kg Rear Unit Weights: 378 lb / 172 kg Rear Unit TG-R30P 80 TON CAPACITY: KTG-80P Front Unit TG-F40P + Rear Unit TG-R40P + Pads Front Unit TG-F40P Rear Unit TG-R40P Front Unit Weights: 667 lb / 303 kg Rear Unit Weights: 428 lb / 194 kg
MODIFICATIONS & CUSTOM SOLUTIONS The Hilman Tri-Glide can be modified in a number of ways to accommodate your specific application requirements. Custom turntables and special hole patterns, on the contact points, are just a couple of examples where users have made the Hilman Tri-Glide System a perfect fit. Hilman also manufactures completely custom Tri-Glide Solutions to meet specific performance requirements. Modifications and Custom Solutions are available in any capacity! Diamond Swivel Locking Top Steel Wheels Custom Top Plate Turntable with Locator Pin Rear Dollies with Locator Pin Poly Wheels Custom 3 point Load Moving Solution Feature A manufacturing customer was looking for a solution for moving large, bulky reels around their production facility, without using an overhead crane. Hilman developed a custom Tri-Glide Solution that included a reel handling cart for their specific need. The custom Tri-Glide Cart Assembly included a bar, across the top, which was designed to go through the reel, allowing it to stay in place. A hydraulic hand pump was then used to energize the cylinders, on either side of the cart upward, and lift the reel off the ground, for safe moving. The handle was also modified to be shorter in length for better maneuverability. The customer was able to successfully use this Hilman product as a safe, efficient 3 point load moving solution. Hydraulic Cylinders Hydraulic Hand Pump Quick Release Gate Modified Handle Rear Dollies
CONFIGURATIONS The Hilman Tri-Glide System is versatile in that the front and rear units can be combined and configured to become a 4 or more point skidding solution. Hilman Tri-Glide components can be purchased individually to accommodate user preference. All units come with non-slip pads for the front unit and rear dollies. 4-Point Moving Solution Two Rear Units with Spreader Bars 3-Point Moving Solution One Front Unit One Rear Unit with Spreader Bar 4-Point Moving Solution Two Front Units One Rear Unit with Spreader Bar A Kit is a Complete System consisting of 1 Front Unit + 2 Rear Units + 1 Spreader Bar + Pads Kit Individual Front Unit Pair of Rear Units & Spreader Bar Tri-Glide with NYLON Wheels (2) Units + (1) Bar + Pads KTG-10N 10 ton capacity TG-F5N 5 ton capacity TG-R5N 5 ton capacity KTG-15N 15 ton capacity TG-F7.5N 7.5 ton capacity TG-R7.5N 7.5 ton capacity KTG-20N 20 ton capacity TG-F10N 10 ton capacity TG-R10N 10 ton capacity Tri-Glide with POLY Wheels KTG-10P 10 ton capacity TG-F5P 5 ton capacity TG-R5P 5 ton capacity KTG-15P 15 ton capacity TG-F7.5P 7.5 ton capacity TG-R7.5P 7.5 ton capacity KTG-20P 20 ton capacity TG-F10P 10 ton capacity TG-R10P 10 ton capacity KTG-24P 24 ton capacity TG-F12P 12 ton capacity TG-R12P 12 ton capacity KTG-40P 40 ton capacity TG-F20P 20 ton capacity TG-R20P 20 ton capacity KTG-60P 60 ton capacity TG-F30P 30 ton capacity TG-R30P 30 ton capacity KTG-80P 80 ton capacity TG-F40P 40 ton capacity TG-R40P 40 ton capacity Tri-Glide with STEEL Wheels KTG-10S 10 ton capacity TG-F5S 5 ton capacity TG-R5S 5 ton capacity KTG-15S 15 ton capacity TG-F7.5S 7.5 ton capacity TG-R7.5S 7.5 ton capacity KTG-20S 20 ton capacity TG-F10S 10 ton capacity TG-R10S 10 ton capacity DO NOT EXCEED LOAD RATING OF THE PRODUCT ONLY OPERATE WITH A BALANCED & STABLE LOAD ON A SMOOTH LEVEL SURFACE! WARNING! IMPROPER USE OF HILMAN LOAD MOVING PRODUCTS CAN RESULT IN INJURY TO AVOID INJURY: STAY CLEAR OF LOAD AND KEEP HANDS AND FEET FROM UNDER LOAD READ & FOLLOW ALL INSTRUCTIONS PROVIDED IN THE HILMAN LOAD MOVING PRODUCTS MANUAL 12 Timber Lane Marlboro, New Jersey 07746 1-888-2-ROLL-IT 7 sales@hilmanrollers.com
Moving the Heavyweights Since 1953! Contact Us 12 Timber Lane Marlboro, NJ 07746 USA Tel: (732) 462-6277 Fax: (732) 462-5285 Web: www.hilmanrollers.com Email: sales@hilmanrollers.com Toll Free (North America): 1-888-2-ROLL-IT International Fax: 732-462-3238 ONE YEAR LIMITED WARRANTY We warrant each new roller sold by us to be free from manufacturing defects in normal service for a period of one (1) year commencing with delivery of the roller to the original user. Our obligation under this warranty is expressly limited at our option, to the replacement or repair at Hilman, Incorporated, Marlboro, New Jersey 07746 USA, or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective. This warranty does not apply to defects caused by damage or unreasonable use, including failure to provide reasonable and necessary maintenance, while in the possession of the consumer. WE SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES OF ANY KIND, including, but not limited to, consequential labor costs or transportation charges in connection with the replacement or repair of defective parts. We make no warranty with respect to trade accessories. They are subject to the warranties of their manufacturers. ANY IMPLIED OR STATUTORY WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. We make no other express warranty, nor is anyone authorized to make any on our behalf. Any and all claims arising against Hilman Rollers or subsidiaries or affiliated firms concerning the use of the Hilman Rollers shall be governed by the laws of the State of New Jersey in the USA. The specifications in this catalog are given as general information only and are not binding. Hilman reserves the right to change specifications or make alterations to products, parts or accessory equipment at any time without prior notice and for any reason whatsoever. 2017 Hilman Rollers. All Rights Reserved.