eyerle US L.L.. Locking Ladder Pull : 4.2 US
: 02 bout us Since 1995 P-eyerle/Germany produce quality builder hardware. n own design and engineering department follow up the time trends of the architectural work and the law regularizations for all products. Our production at 2 continents helps to make us flexible w/o degradations.
: 03 Features: Single sided ladder pull or back to back Key operation for SFI (standard) or LFI ( optional adapter) Rotary knob or dummy or privacy function Door type: 3/8" - 1/2" thick glass, 1 3/8" - 1 1/2 wood, aluminum or hollow metal Multiple locking options: flor, head or both olt location 42" from finished floor to centerline of bolt enefits: Patented pushless locking function Use your own SFI or LFI (optional) master key system locking device tested over 200 000 cycles Self-blockage locking device/ unique clutch system avoids lifting up the bolt D compliant: quadrant turn/ catch/ lock height/ Low friction EOS-oncept: Pushless function Use own Master Key System Variability for 260 or 90 turn Low friction enter support and drill template for sliding s
: 04 Model Options Full Height Pull - Dual (and customized Single) olt Models 4 1/4 106 mm 3 5/8 92 mm ø 2 52 mm 25/8 65 mm
Model Options Half Height Pull - olts Up : 05 2 5/8 65 mm ø 2 52 mm 4 1/4 106 mm 3 5/8 92 mm Half Height Pull - olts Down 4 1/4 106 mm 3 5/8 92 mm Standard Lenghts: 49" ø 2 52 mm 54" 60" 72" 84" 2 5/8 65 mm
: 06 Technical Specifications Location from Door olt djustment ø 1 25 mm ø 1 3/8 floor 2 52 mm 2 5/8 65 mm 1 26 mm travel ø 1/4-3/8 6-10 mm gap required Locking Ladder Pulls are available for 3/8" - 1/2" thick glass or 1 1/2" - 1 3/4" thick aluminum, wood or hollow metal. Head Detail with Strike for Glass Doors Head Detail with Strike for single acting pivot 3/4 19 mm 3/4 19 mm
Technical Specifications : 07 Non Locking Pull (Standard) Rotary knob inside / privacy function outside (Standard) Key operated lock outside / turning knob inside (Standard) Key operated lock outside / dummy inside (optional)
: 08 D Options For D compliance it is necessary to enable different functionalities. ll of the below options are available for customized locking pulls. 90 Quadrant turn: For a fast and nearly weak friction we offer a quadrant turn. This patented accessory allows to open the with a quarter spin at the knob side. atch: For the turn knob side, we offer a catch. This catch developed by our own designer enables persons with disabilities to turn it easily using their arms. LLP standard 42 1065 mm D require Location of the lock: For persons with disabilities the lock for a must be located between 34 and 46 above the finished floor. The lock location of all of our locking pulls is 42 and complies with D requirements. Pushless function Pushless function: With our patented coupling it is possible to open and lock the pulls without push or pull, only with a turn. You can feel this high-tech engineering work at every turn.
EOS-oncept : 09 SFI-Master Key System: Use your own SFI-ylinder! Or, do you need to install a complete SFI- Master key system into the building? No problem! Our patented construction fits to all your needs. LFI-dapter and Master Key System: Quite often official buildings are equipped with LFI and LFI-Master key systems. With our locking pulls it is possible to change from SFI to LFI. Our engineers developed an adapter (optional) to comply with the supposition. sk your installer or distributor for the change from SFI to LFI. enter support & drill template: Optionally we offer a center support for sliding s. The center support stops the panel at a defined position. This makes it easier to place the deadbolt into the dust proof strike. template helps to drill the hole for center support and dustproof strike at the right distance. Low friction Easy turn: Our locking pulls are engineered for a low friction during rotation. Due to our specialized and high quality production equipment, they are able to offer a smoothly circular motion. (Good quality of the SFI/LFI cylinder is required)
: 10 esthetic Finish The general finish for all of our stocked Locking Ladder Pulls is Satin Stainless Steel. The fine brushed surface set a smooth feel during handling the pull. This finish discover the most of our productgroups in stainless steel a.e. arn Hardware. ase ottom Rollers, Sliding Shower Door Hardware, Flush Pull and Pull Handle. s a customized finish, we offer some of the locking Ladder Pulls in Polished Stainless Steel. The Polished Surface express a bright glance for the designed situation. Our own polishing department allows us to satisfy the most of customs request. Leather gives a handle a particularly refined look and a pleasant feeling. The aesthetic finish allows the designer the inimitably and personal signature.
Pull Details Full Height Pull - Dual (and customized Single) olt Models : 11 Order/ Request: Inquiry: Quantity: Model: Dual olt olt up ø 2 52 mm 4 1/4 106 mm 3 5/8 92 mm olt down Dimensions: 25/8 65 mm D SFI LFI
: 12 Pull Details Half-Height Pull, olt Up Key operated lock outside Rotary knob inside 2 5/8 65 mm LLP Half Height Pull, olt Up Dimensions: Spec Spec 6 Glass Door thick: 3/8 1/2 item no. description 143.00001 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 item no. description 143.00002 Key operated lock outside/rotary knob inside ø 2 52 mm 4 1/4 106 mm 3 5/8 92 mm Ladder Pull Glass utout Template Determined by customer ø 1/2 12 mm ø 3/4 18 mm 42
Pull Details 49" Half-Height Pull Down : 13 Non-locking pull Rotary knob /Privacy function Key operated lock outside / Rotary knob inside 3 1/4 82 mm ø 1 25 mm 3 9/16 90 mm 2 3/4 70 mm ø 2 52 mm 4 1/4 106 mm 3 5/8 92 mm ø 1 9/16 40 mm 2 1/16 52 mm 2 5/8 65 mm 49 Half Height Pull, olt Down Dimensions: 49 36 6 49" Ladder Pull Glass utout Template Glass Door thick: 3/8 1/2 item no. description 143.00003 Non Locking Pull 143.00004 Rotary knob inside/privacy function outside 143.00005 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 item no. description 143.00007 Non Locking Pull 143.00008 Rotary knob inside/privacy function outside 143.00009 Key operated lock outside/rotary knob inside model options for 49" height stock customized back to back locking ladder pull Non-Locking Pull X SFI - rotary knob X rotary knob-privacy function X ø 3/4 18 mm ø 1/2 12 mm Determined by customer
: 14 Pull Details 54" Half-Height Pull Down Non-locking pull Key operated lock outside / Rotary knob inside 3 1/4 82 mm ø 2 52 mm 4 1/4 106 mm 3 5/8 92 mm 2 5/8 65 mm 54 Half Height Pull, olt Down Dimensions: 54 36 6 Glass Door thick: 3/8 1/2 item no. description 143.00011 Non Locking Pull 143.00013 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 item no. description 143.00014 Non Locking Pull 143.00016 Key operated lock outside/rotary knob inside model options for 54" height stock customized back to back locking ladder pull Non-Locking Pull X SFI - rotary knob X 54" Ladder Pull Glass utout Template ø 3/4 18 mm ø 1/2 12 mm Determined by customer
Pull Details 60" Half-Height Pull Down : 15 Non-locking Pull Key operated lock outside Rotary knob inside 3 1/4 82 mm 4 1/4 106 mm 3 5/8 92 mm D ø 2 52 mm 2 5/8 65 mm 60 Half Height Pull, olt Down Dimensions: 60 36 6 Glass Door thick: 3/8 1/2 item no. description 143.00020 Non Locking Pull 143.00022 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 143.0024 Non Locking Pull 143.0026 Key operated lock outside/rotary knob inside model options for 60" height stock customized back to back locking ladder pull Non-Locking Pull X SFI - rotary knob X D 60" Ladder Pull Glass utout Template ø 1/2 12 mm ø 3/4 18 mm ø 1/2 12 mm Determined by customer
: 16 Pull Details 72" Full-Height Pull Down Non-locking Pull Key operated lock outside Rotary knob inside 3 1/4 82 mm 4 1/4 106 mm 3 5/8 92 mm D ø 2 52 mm 2 5/8 65 mm 72 Full Height Pull, olt Down Dimensions 72 36 6 Glass Door thick: 3/8 1/2 item no. description 143.0028 Non Locking Pull 143.0030 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 143.00032 Non Locking Pull 143.00034 Key operated lock outside/rotary knob inside model options for 72" height stock customized back to back locking ladder pull Non-Locking Pull X SFI - rotary knob X D 72" Ladder Pull Glass utout Template ø 1/2 12 mm ø 3/4 18 mm ø 1/2 12 mm Determined by customer
Pull Details 84" Full-Height Pull Down : 17 Non-locking Pull Key operated lock outside Rotary knob inside 3 1/4 82 mm 4 1/4 106 mm 3 5/8 92 mm D ø 2 52 mm 2 5/8 65 mm 84 Full Height Pull, olt Down Dimensions: 84 36 6 Glass Door thick: 3/8 1/2 item no. description 143.00037 Non Locking Pull 143.00039 Key operated lock outside/rotary knob inside Wood thick: 1 1/2 1 3/4 143.00041 Non Locking Pull 143.00043 Key operated lock outside/rotary knob inside model options for 84" height stock customized back to back locking ladder pull Non-Locking Pull X SFI - rotary knob X D 84" Ladder Pull Glass utout Template ø 1/2 12 mm ø 3/4 18 mm ø 1/2 12 mm Determined by customer
: 18 Top Strikes 13/16 20 mm 1 1/2 38 mm 3 75 mm Strike for Wood or luminum frame Door (single active pivot) Item no: L: W: H: 143.00046 3 11/2 13/16 luminum anodized, Stainless Steel Optic 13/16 20 mm 3 75 mm 3 75 mm Strike for Glass Door (single active pivot) Item no: L: W: H: 143.00045 3 3 13/16 luminum anodized, Stainless Steel Optic, Rubber 1/8 3 mm 1-3/8 Ø35 1 3/16 30 mm 2 3/4 70 mm 2-9/16 65 Strike for Metal Sheet Item no: L: W: H: 143.00047 2 3/4 1 3/16 1/8 3 15/16 100 mm 2 50 mm Strike for Glass Panel: Item no. L: D: /: 143.00055 3 5/16 1 3/8 2 ø 3/4 18 mm 2 9/16 65 mm 2 50 mm 1 3/8 ø 3/4 18 mm Determined by customer
ottom Strikes : 19 Dust Proof Strike for 7/8" olt ø 1 1/4 32 mm ø 1 3/4 45 mm ø 1 5/8 40 mm 36 mm Item no D d T 143.00053 1 3/4" 1 1/4" 1 5/8" Drill hole ø 1 3/8" x 1 3/4" Material: Satin stainless steel (ISI 303), aluminum Strike for 7/8" olt ø 1 1/4 32 mm ø 1 3/4 45 mm ø 1 5/8 40 mm 36 mm Item no D d T 143.00052 1 3/4" 1 1/4" 1 5/8" Drill hole ø 1 3/18" x 1 3/4" Material: Satin stainless steel (ISI 303), aluminum Strike (dditional Plate) for 1/2" olt 1/8 3 mm 1 3/16 30 mm 2 3/4 70 mm Item no L W t 143.00051 2 3/4" 1 1/4" 1/8" Suitable for 143.00049 Material: Satin stainless steel (ISI 303) Dust Proof Strike for 1/2" olt (useable only optional for Locking Ladder Pull) ø 3/4 20 mm 1 3/8 36 mm 1 5/8 40 mm IItem no D d T 143.00049 1" 1/2" 1 5/8" Material: Steel, nickel-plated ø 1 25 mm
: 20 Related Product Line arn Door Hardware Flatec V for wood s Intertek -tested ntra II for wood s Intertek -tested Tritec for glass s Intertek -tested
Related Product Line ase ottom Rollers : 21 Full Moon for glass and wood s Intertek -tested Door pull Level Deeply Move for glass and wood s
: 22 Related Product Line Shower Sliding Hardware Urban Slide III - our bestseller at sliding shower hardware S50 - aluminum box system for glass or wood. Small dimensions with optional Softlose - mechanism.
Related Product Line Pulls and Flush Pulls : 23 For more Information ask for our atalogue or see www.beyerle-us.com
eyerle US L.L.. 5126 S Royal tlanta Dr. Tucker, G 30084, US Phone: + 1 (770) 349-6324 Fax: + 1 (770) 934-3384 info@beyerle-us.com www.beyerle-us.com Locking Ladder Pull : 4.2 : Version US 05/2016