PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,, and 3 - oxes with hinged cover: types 3, 3R,,, and 3 vailable on request - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,, and 3 - oxes with hinged cover: types 3, 3R,,, and 3 vailable on request LR - Lloyd's Register of Shipping NV L - ermanischer Lloyd - The range consists of nine boxes based on the and 85 mm modules. - The bases are made of light grey (RL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M threaded inserts (odge) for fixing a mounting plate or mounting frame. - The cover is made of either transparent polycarbonate or light grey (RL 7035) hot moulded glass fibre reinforced polyester, dyed in mass. - PO-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree P67 according to N/ 6059 - Protection degree K08 against external mechanical impacts according to N/ 608 - ach large box is a multiple of a smaller one. ts fixing points are also a multiple of those of a small box. These fixing points are blind holes for M threaded inserts. - our to six blind holes for M6 threaded inserts are also provided in each base. - PO polyester boxes are designed for both wall and pole mounting. - The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc. - Versatile service conditions: polyester enclosures can withstand continuous temperatures up to 70 (peak temperatures up to 30 ) and the transparent polycarbonate covers resist service temperature up to 0 - Rated insulation voltage Ui = 000V. - PO boxes are UL listed, as per UL Standard 508 They are also S approved. pplications Overview of the range imensional drawings Specifications for tender documents Power dissipation values Page.3 Page.6 Page.5 Page.68 - ndustry - Oil refineries - Shipyards - Steel works - reweries - Petro-chemical plants - Public utilities - Photovoltaic.
PO Modular panel building ➀ Polyester cover ➀ ➁ ➁ Wall mounting feet, stainless steel or non-metallic ➂ ir vent ➃ Non-metallic hinge ➂ ➄ oupling collar ➆ ➄ ➅ ➃ ➇ ➅ ➆ ➇ ➈ ➉ epth extension frame Transparent polycarbonate cover oupling cover plate Twist lock latch oamed polyurethane gaskets with tongue and groove labyrinths at all seal points Modular boxes ntro ➈ ➉ Optimal use of the modular design The unique modular concept of PO boxes enables mounting of different standard functions in coupled boxes. Technical data ngress protection according 6059 Single enclosure with polyester cover with transparent cover P67 P66 with hinged cover P67 nclosure with flange plate P65 () nclosure with rubber cable sleeve P3/5 () nclosure combination P67 () nclosure with depth extension frame P66 () dependent on cover version used () P5 when installed at bottom side of enclosure.5
PO Modular polyester boxes PO PO 3 PO PO 7 ox with polyester cover P67 x W x 86 x 5 x 0 85608 30 x 86 x 75 85609 30 x 30 x 75 856050 37 x 30 x 75 85605 nsulated boxes Light-grey cover with fixing screws ox with polycarbonate cover P66 x W x 86 x 5 x 0 856057 30 x 86 x 75 856058 30 x 30 x 75 856059 37 x 30 x 75 856060 ntro Transparent cover with fixing screws ox with hinged cover P65 Transparent cover with thumb screws for the door x W x 30 x 86 x 75 856066 30 x 30 x 75 856067 37 x 30 x 75 856068 ox with hinged cover P55 x W x 86 x 5 x 0 85607 30 x 86 x 75 85607 30 x 30 x 75 856073 37 x 30 x 75 85607 Polyester cover light-grey ox with hinged cover and lock (ventilated) P x W x 30 x 86 x 75 856080 30 x 30 x 75 85608 37 x 30 x 75 85608 Polyester cover light-grey :.6
PO PO 5 PO 8 PO 6 PO PO 88 x 30 x 75 85605 558 x 30 x 75 856053 603 x 30 x 75 85605 603 x 37 x 75 856055 603 x 603 x 75 856056 88 x 30 x 0 85606 558 x 30 x 0 85606 603 x 30 x 0 856063 603 x 37 x 0 85606 603 x 603 x 0 856065 Modular boxes ntro 88 x 30 x 75 856069 603 x 30 x 75 856070 88 x 30 x 75 856075 558 x 30 x 75 856076 603 x 30 x 75 856077 603 x 37 x 75 856078 603 x 603 x 75 856079 88 x 30 x 75 856083 558 x 30 x 75 85608 603 x 30 x 75 856085 603 x 37 x 75 856086.7
PO Modular polyester boxes PO PO 3 PO PO 7 ase with plain sides x W x 86 x 5 x 85 856000 30 x 86 x 3 85600 30 x 30 x 3 85600 37 x 30 x 3 856003 nsulated boxes Sizes in box refer to location of open side panel side-wall ase with open side ase with open sides x W x x W x 30 x 86 x 3 85057 30 x 86 x 3 856009 30 x 30 x 3 85079 30 x 30 x 3 85600 37 x 30 x 3 8535 37 x 30 x 3 8560 ntro ase with open sides x W x 30 x 86 x 3 85607 30 x 30 x 3 85608 37 x 30 x 3 85609 Polyester cover Light-grey cover with fixing screws x W x 86 x 5 x 5 85605 30 x 86 x 5 85606 30 x 30 x 5 85607 37 x 30 x 5 85608 Polycarbonate cover Transparent cover with fixing screws x W x x W x 86 x 5 x 5 8596 30 x 86 x 5 8573 30 x 30 x 5 8577 37 x 30 x 5 8576 inged cover Transparent cover with thumb screws for the door x W x 30 x 86 x 5 85603 30 x 30 x 5 856035 37 x 30 x 5 856036 epth extension frame lass fibre reinforced polyamide P6 x W x 86 x 5 x 35 85600 30 x 86 x 35 8560 30 x 30 x 35 8560 37 x 30 x 35 85603 Mounting plate ard paper 5 mm Sendzimir zinc coated sheet steel mm x W x W 0 x 05 8590 3 x 99 859 8 x 39 8587 9 x 3 8588 5 x 8 8578 9 x 9 8579 98 x 5 858 39 x 9 8585 Perforated.5 mm (or sliding nuts, see.3) x W 3 x 99 8587 9 x 3 85875 9 x 9 85876 39 x 9 85877 lind cover plate PV.5 mm x W 50 x 5 8589 65 x 50 8586 65 x 65 858 335 x 65 8580.8
PO PO 5 PO 8 PO 6 PO PO 88 x 30 x 3 85600 558 x 30 x 3 856005 603 x 30 x 3 856006 603 x 37 x 3 856007 603 x 603 x 3 856008 88 x 30 x 3 8503 88 x 30 x 3 8560 558 x 30 x 3 8536 558 x 30 x 3 85603 603 x 30 x 3 857 603 x 30 x 3 8560 603 x 37 x 3 856 603 x 37 x 3 85605 603 x 603 x 3 855 603 x 603 x 3 85606 Modular boxes 88 x 30 x 3 85600 558 x 30 x 3 8560 603 x 30 x 3 8560 603 x 37 x 3 85603 603 x 603 x 3 8560 ntro 88 x 30 x 5 85609 558 x 30 x 5 856030 603 x 30 x 5 85603 603 x 37 x 5 85603 603 x 603 x 5 856033 88 x 30 x 80 8509 558 x 30 x 80 8593 603 x 30 x 80 858 603 x 30 x 5 8583 603 x 37 x 80 8590 603 x 603 x 80 8580 88 x 30 x 5 856037 603 x 30 x 5 856038 603 x 37 x 5 856039 () 558 x 30 x 60 8560 603 x 30 x 60 85605 603 x 37 x 60 85606 603 x 603 x 60 85607 () 856039 inged cover with side flange 3 x 5 8509 35 x 9 85095 8 x 5 8570 505 x 9 857 58 x 5 8586 550 x 9 8587 58 x 3 8589 550 x 39 859 555 x 555 857 550 x 555 8578 35 x 9 85878 505 x 9 85879 550 x 9 85880 550 x 39 8588 550 x 555 8588 50 x 65 85090 - - - -.9
PO ccessories ombi end-plates in polystyrene Width x M0/6 + x M3/5 85 x M3/5 + 3 x M5/M0 + x M0/6 9 x M5/0 x M50/0 + x M5/0 3 x M0/6 3 x M0/3 + x M0/6 x M0/3 + 0 x M5/0 370 3 x M5/0 370 856096 8563 856097 856098 856099 85600 8560 8560 oupling frames oupling frames are made of polyamide (polyurethan gasket). - omplete with drilling template. - The smallest side of the coupling frame fits the front side of the box. - The maximum passage between two coupled boxes can be marked off with the aid of the drilling template. Within this mark, any desired opening can be made. nsulated boxes able glands, see "eneral accessories" Width 85 370 85606 85607 85608 or dimensions of maximum opening, see "imensional drawings". ntro lind end-plates in polyester Width 85 85603 n polyester (funnel-shaped in polystyrene) able-end boxes or side Max Ø No. of clamps cable (mm) provided 370 8560 85605 8565 8566 8567 78936 78937 8568 PO3 x 75 PO3 x 75 PO x 75 PO6 x 75 PO7 x 75 370 PO7 3 x 75 imensions, see "imensional drawings". or dimensions of maximum opening, see "imensional drawings". able clamps Rubber cable sleeves - or direct mounting - omplete with cut-out template 8506 or use as a sealing gland on cable end boxes. Max. Ø cable: 75 mm 8505 or direct mounting to cable end box or on a mounting plate. Max. Ø cable: 75 mm Used in PO 3 and PO 7 nclosure side 85,, 370 mm 850 Universal stress relieving cable clamp for use in standard enclosures. Max. Ø cable: 75 mm Used in PO nclosure side and 600 mm 85 or mounting to universal stress relieving cable clamp 850. Max. Ø cable: 75 mm Spare part/extension. imensions, see "imensional drawings"..0
PO ccessories ridges Make heavy connections easier whilst guaranteeing that the original degree of protection is maintained. 8503 its the mm side. 85 its the 370 mm side. Safety locks with handle* omplete with drilling template, keys and mounting hardware. 8500 keys V 3 Safety locks without handle 850 Square key 8 mm Triangular key 8 mm 850 ir vents P Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent water condensation. omplete with drilling template and screws. The air vents are preferably mounted in the upper and lower part of the base. 833677 Set of pieces in polyamide. RL 7035 Pole mounting - t the rear of enclosure, -profiles are installed. - round the pole, a fixation (holding) band is installed. On the -profile, clamps are placed to catch the holding band securely. 89050 Set of -profiles for side and 370 mm (fixation band not included). Modular boxes ntro 850 Triangular key mm 8503 ouble-bit yale key 3 mm * Not usable with hinged cover. Mounting brackets 8566 Set of pieces in glass fibre reinforced polyamide - or external fixing points. - irect fixing through the four corner holes of the enclosure. - f extension frames are to be used, the mounting brackets shall be mounted before the frames. - Maximum permissible component weight: 00 kg. 8505 Set of pieces in stainless steel (type 30) - or extremely severe working conditions. - or band iron fixation to round poles. - The four brackets are mounted directly at the rear of the box in rein forcements provided for that purpose. - ixing by M threaded bushes (supplied). - Maximum permissible component weight: 00 kg..
PO ccessories inges inge screw 85609 8560 856 856 8563 856 8556 Set of pieces Remark: the box must be mounted prior to fitting the hinge screw. nsulated boxes Selection ase PO 3--7-5 8-6-- Polyester cover Polyester cover + depth extension Polycarbonate cover Polycarbon. cover + depth extension - n order to enable hinge mounting, holes must be drilled in the cover and in either the base or the extension frame. Templates for drilling these holes are supplied with eacht set. The type of hinge depends on the required combination. - ence six sets of hinges are available. ach set consists of two hinges, srews, a drilling template, the mounting instructions and, if necessary, spacer Triangular TTR sealing screw 856 or screwed cover. Set of pieces. or hinged cover. 8506 shims. Set of pieces. ntro over hinges 8568 Set of pieces in stainless steel (complete with fixing hardware) Spanner 8506 or triangular TTR sealing screw. Sealing plate 8560 Set of pieces, for cover-screw sealing. over must be milled along the dotted line to a depth of 6 mm prior to hinge mounting. over screws (spare parts) 8555 50 Slotted screw Padlocking set 8500 Max. diameter of padlock: 8 mm. Screws for hinged cover 8505 50 Threaded inserts Thumb grip or cover screws or hinge screws. M odge type inserts 8506 00 Set of 50 pieces Set of pieces 8559 8558 8537 00 M6 odge type inserts x, 50 mm 8507 M special tool for securing 85003 M6 special tool for securing.
PO Universal fuseboard frames - Metering and modular frames PO 7 (delivery condition) PO 5 PO 8 PO 6 PO - PO Metering or the installation in PO7, PO5, PO8 and PO6. The meter-cross is pre-assembled for PO7. t can be adjusted for other sizes by moving the lower profile. The vertical profile is punched accordingly. ZZ 89039 ZZ 89039 ZZ 89039 ZZ 89039 ZZ 89066 PO 3 PO PO 7 PO 5 PO 6 Modular boxes ntro 30 x 86 modules N3 8536 30 x 30 modules N 85336 37 x 30 8 modules N7 85353 88 x 30 modules N53 8583 603 x 30 modules N63 8535 Universal fuseboard frames ncludes: - mpty frames fitted with an earth terminal and cover plate. - The packaging includes fixing screws and height extension studs. 30 x 86 modules N3 85330 30 x 30 8 modules N 85338 37 x 30 36 modules N7 85358 603 x 30 56 modules N6 8537 ccessories lank plate for screening off rectangular openings 88056 m or cutout of 5 mm Marking strip self adhesive 853 m lanking plate or modules 60 ranch terminals 6 x 0 mm + x 6 mm to clip on x mm bar or modules 608 500 arth bar green Neutral bar blue 6086 6087.3
PO quipped individual units PO 3 PO PO 7 PO 6 PO nsulated boxes nclosures for N-rail equipment ncludes: - base with two open sides - with combi end plates top: 3 x M0/6 bottom: x M3/5 + 3 x M5/0 + x M0/6 - base frame with earth connector and coverplate - transparent hinged cover 86 x 30 x 75 modules 8569 37 x 30 x 75 8 modules 8560 603 x 30 x 75 modules 856 ntro nclosures for disconnector loadbreak switches (ilos) and fused disconnector loadbreak switches (ulos) ncludes: - base with two open sides - combi end plates: PO3 on top and bottom: side 85: x M0/6 + x M3/5 PO on top and bottom: side : x M50/0 + x M5/0 PO 7 and PO are with open sides, cable entry plates are to be ordered separately, see p..9 - mounting plate with threaded holes and earthing connector - transparent cover with handle cut-out and with screws - extension shaft and operating handle isconnector loadbreak switches and fused disconnector loadbreak switches are to be ordered separately 30 x 86 x 75 LOS 0/63/80/00/5 3P/P + 856 30 x 30 x 75 LOS 60/00 3P/P + 8563 LOS 0/63/5 3P/P + ULOS 000 3/63/00 3P/P + 856 37 x 30 x 75 LOS 3 60/00/50/35 3P/P + 8565 ULOS 00 60 3P/P + ULOS 0 60 3P/P + 8566 603 x 37 x 70 LOS 00/500/630 3P/P + ULOS 50 3P/P + ULOS 00 3P/P + 8567.
PO quipped individual units PO 3 PO PO 7 PO 6 PO nclosures for loadbreak switches (ilos) and fuse bases ncludes: - base with two open sides - with combi end plates top and bottom: x M0/6 + x M3/5 - one N-rail and mounting plate with earthing - transparent cover with handle cut-out and with screws - extension shaft and operating handle 30 x 86 x 75 LOS 0/63/80 3P/P + 8568 Modular boxes isconnector loadbreak switches, fuse bases and fuses are to be ordered separately ntro nclosures for changeover switches (ilos/ulos) ncludes: - base with two open sides - cable entry plates are optional, see p.. - mounting plate with changeover system (-O-) and earth bar - transparent cover with handle cut-out and with screws - extension shaft and operating handle hangeover switches are to be ordered separately 603 x 30 x 0 LOS 5 3P/P + ULOS 000 3/63/00 3P/P + 8569 603 x 37 x 70 LOS 3 60/00/50/35 3P/P + ULOS 00 60 3P/P + ULOS 0 60 3P/P + 85630.5
PO LM mounting-frame Quick-assembly frame for PO distribution boards. Mounting-frame ssembly sequences nsulated boxes LM-profile MR 855 30 x 7 x 3 mm Length = 3 m ross-connection set ZLMKV 857 0 LM cross connector ZLMM 858 0 LM sliding nut - ombine empty enclosures with each other. - ut vertical profile to length and slide on cross-connections. - ix distribution board at the bracket on the vertical profile. - ut horizontal profile to length and slide in cross-connections. - djust profiles and tight all screws. - dd wall-mounting-brackets. ntro ZLMM85 78306 LM screw M8 x 6 ZLMU8 LM washer 78306 Required parts for cross-connection: x 857 + x 858 + x 78306 + x 78306 Wall-mounting-brackets MRW 859 0 M8 racket MR Universal, with screw M5 x 5 8550 0.6