Product Catalog. Visit Southern California Valve

Southern California Valve Product Catalog MANUFACTURING FACILITY 13903 Maryton Ave. Santa Fe Springs, CA 90670 Phone: (562) 404-2246 Toll Free: (800) 554-6421 Fax: (562) 404-2836 Visit us @ SALES AND PROJECT OFFICE 4313 B - FM 2351 Friendswood, TX 77546 Phone: (281) 482-4728 Fax: (281) 482-9728 Email: sales@scvvalve.com

Complete Product Line Call SCV today @ (281) 482-4728 for all your valve needs or visit us on the web @. Carbon & Stainless Bolted Bonnet Gates Sizes: 2-52 Class: 150-2500 Cast Steel Bolted Cover Piston Checks Sizes: 1-24 Class: 300-2500 Carbon & Stainless 3-Piece Full Port Balls Sizes: 1/4-3 Class: 2000 W.O.G. Carbon & Stainless Pressure Seal Gates Sizes: 2-24 Class: 600-2500 Cast Steel Thru Conduit Slab & Expanding Gates Sizes: 2-48 Class: 150-2500 Carbon & Stainless Bolted Bonnet Globes Sizes: 2-18 Class: 150-2500 Dual Plate Checks Wafer & Flanged Wafer Sizes: 1.5-84 Wafer Class: 150-2500 Flanged Sizes: 8-48 Flanged Class: 150-900 Carbon & Stainless Bolted Cover Full Port Swing Checks Sizes: 2-52 Class: 150-2500 Carbon & Stainless 2-Piece Floating Balls Sizes: 1/2-10 Class: 150-300 Forged Steel Gates Sizes: 3/8-2 Class: 800-2500 Forged Steel Globes Sizes: 3/8-2 Class: 800-2500 Forged Steel Swing Checks Sizes: 3/8-2 Class: 800-2500 Forged Steel Piston Checks Sizes: 3/8-2 Class: 800-2500 Carbon & Stainless Pressure Seal Globes Sizes: 2-16 Class: 600-2500 Carbon & Stainless Bolted Cover Checks Sizes: 2-52 Class: 150-2500 Carbon & Stainless 2-Piece Trunnion Balls Sizes: 2-36 Class: 150-1500 Carbon & Stainless 3-Piece Trunnion Balls - API 6A Sizes: 2-1/16-13-5/8 Pressure: 2000, 3000 & 5000 Cast Steel Dual Seal Expanding Plugs Sizes: 2-24 Class: 150-900 Cast Steel Lubricated Plugs Sizes: 1/4-24 Class: 150-1500 Carbon & Stainless Pressure Seal Checks Sizes: 2-24 Class: 600-2500 Carbon & Stainless 3-Piece Trunnion Balls - API 6D Sizes: 1-48 Class: 150-2500 Carbon & Stainless Rising Stem Balls Sizes: 2-24 Class: 150-900

Table of Contents SCV Figure Number Chart i & ii Technical Data for Optional Seal & Seat Selections iii Seal & Seat Pressure Temperature Chart iv Valve ID Tag & Valve Markings Identification v SCV Introduction 01 Carbon & Stainless Steel Wedge Gates 02 Carbon & Stainless Steel Pressure Seal Gates 07 Cast Steel Thru Conduit Slab & Expanding Gates 11 Carbon & Stainless Steel Globes 23 Carbon & Stainless Steel Pressure Seal Globes 28 Carbon & Stainless Steel Standard Swing Checks 32 Carbon & Stainless Steel Full Port Swing Checks 36 Carbon & Stainless Steel Pressure Seal Checks 40 Cast Steel Piston Checks 44 Dual Plate Checks - Wafer & Flanged 49 Forged Steel Gates 55 Forged Steel Globes 57 Forged Steel Piston Checks 59 Forged Steel Swing Checks 61 Cast Steel Pressure Balanced Lubricated Plugs 63 Dual Seal Expanding Plugs 66 Carbon & Stainless Steel 3 - Piece Full Port Balls 70 Carbon & Stainless Steel 2 - Piece Flanged Floating Balls - Full & Reduced Port 73 Carbon & Stainless Steel 2 - Piece Trunnion Mounted Balls - Full & Reduced Port 84 Carbon, Alloy, & Stainless Steel 3 - Piece Trunnion Mounted Balls - API 6A 98 Carbon & Stainless Steel 3 - Piece Trunnion Mounted Balls - API 6D - Full & Reduced Port 107 Carbon & Stainless Steel Rising Stem Balls 125 Pressure Temperature Ratings - ASME B16.34-2004 129 Flange Dimensions - ANSI B16.5 & B16.47 132 Butt-welding Dimensions - ANSI B16.25 134 Industry Standards for Valve Manufacturing 136 Terms & Conditions 137

SCV Figure Number Chart Valve Type Bore Size Pressure Class Body/Bonnet Body Material Trim Material ANG = Angle.02 = 1/16.5 = 50 B = Bolted 00 = Cast Iron 10 = CR13 BAL = Ball.03 = 1/8.7 = 75 C = Cryo 02 = LCC 11 = CR13/HF BCK = Ball Check.25 = 1/4 01 = 150 L = Lug 03 = LC2 12 = CR13 HF/HF BFY = Butterfly.50 = 1/2 02 = 200 N = NRS Bolted 05 = Ductile 13 = Steel/ENP CHK = Choke.07 = 9/16 03 = 300 P = Pressure Seal 08 = A216 WCC 14 = Steel/Chrome CTL = Control.08 = 13/16 04 = 400 S = Seal Weld 09 = WC9/F22 15 = LF2/ENP DCK = Dual Wafer Check.75 = 3/4 06 = 600 T = Top Entry 10 = A216 WCB 16 = 416 DSP = Dual Seal Plug 01 = 1 08 = 800 U = Union 11 = A352 LCB 17 = 17 4-PH EPG = Expanding Gate 1.2 = 1-1/16 09 = 900 W = Wafer 12 = A350 LF2 20 = Alloy 20 FCK = Full Port Check 1.3 = 1-1/8 12 = 125 Y = Y-Pattern 13 = A105 21 = Alloy 20/HF FPP = Full Port Plug 1.4 = 1-1/4 15 = 1500 14 = LC3/LF3 22 = F-22 GAT = Gate 1.5 = 1-1/2 17 = 175 15 = A217 C5 25 = Inconel Overlay GLB = Globe 1.8 = 1-13/16 20 = 2000 16 = WC6/F11 28 = Sanicro 28 KIF = Knife 02 = 2 25 = 2500 17 = 17-4 PH 30 = 4130 NEG = Needle Globe 2.2 = 2-1/16 30 = 3000 18 = LF6 31 = 321 NEP = Needle Plug 2.3 = 2-1/8 45 = 4500 20 = Alloy 20 33 = 304/HF PCK = Piston Check 2.5 = 2-1/2 50 = 5000 22 = F-22 34 = 304 PLG = Plug 2.7 = 2-9/16 60 = 6000 24 = 254 SMO 35 = 316/HF RSB = Rising Stem Ball 03 = 3 10 = 10000 25 = F5 36 = 316 SCK = Swing Check 3.3 = 3-16 05 = 15000 26 = F91 37 = 317/HF TCG = Thru Conduit Gate 04 = 4 27 = C12A 38 = 317 TCK = Tilting Disc Check 4.2 = 4-1/16 28 = Sanicro28 39 = 1040 WCK = Wafer Check 05 = 05 29 = C12/F9 41 = 410 06 = 06 30 = AISI 4130 42 = Full Teflon 08 = 08 31 = 321 44 = F44 Duplex 10 = 10 32 = 321L 47 = 347 12 = 12 33 = 304L 48 = 347/HF 14 = 14 34 = 304 49 = Carpenter 16 = 16 35 = 316L 50 = Monel 18 = 18 36 = 316 51 = F51 Duplex 20 = 20 37 = 317L 52 = Nickel Alloy 22 = 22 38 = 317 53 = F53 Duplex 24 = 24 40 = AISI 4140 54 = A516/ENP 26 = 26 44 = F44 Duplex 56 = A36 ENP 30 = 30 47 = 347 57 = A537 ENP 32 = 32 48 = 347L 60 = Duplex 36 = 36 49 = Carpenter 61 = Super Duplex 40 = 40 50 = Monel 62 = 625 Inconel 42 = 42 51 = F51 Duplex 63 = 600 Inconel 48 = 48 52 = Nickel Alloy 69 = Naval Brass 50 = 50 53 = F53 Duplex 70 = Bronze 54 = 54 54 = ASTM A516 71 = Aluminum 60 = 60 56 = ASTM A36 78 = 718 Inconel 72 = 72 57 = ASTM A537 80 = Alu/Brz 78 = 78 60 = Duplex 81 = Ni Alu/Brz 61 = Super Duplex 82 = 825 Inconel 62 = 625 Inconel 83 = Hastelloy 63 = Inconel600 86 = 8026 69 = Naval Brass 87 = 487 70 = Bronze 90 = Titanium 71 = Aluminum 91 = Tantalum 78 = 718 Inconel 92 = 925 Inconel 80 = Alu Bronze 93 = Tungsten Carbide 81 = Ni Alu/Brz 96 = Zirconium 82 = 825 Inconel 83 = Hastelloy B 84 = Hastelloy C 86 = AISI 8026 87 = 487 90 = Titanium 91 = Tantalum 96 = Zirconium i

SCV Figure Number Chart Ends Operation Configuration Seal Material Seat Material Body Pieces Special C = Clamp B = Bare Stem 32 = 3 Way 2 Port 4 = 304 Ring D = Devlon 1 = 1 Piece Body By Pass F = Flat D = Dual Acting 3F = 3 Way Floater 6 = 316 Ring G = Graphite 2 = 2 Piece Body Cadium Coat H = Hub E = Electric 3T = 3 Way Trunnion B = Buna K = PCTFE 3 = 3 Piece Body Epoxy Paint J = RTJ G = Gear 43 = 4 Way 3 Port E = EPDM M/S = Metal Stellite Outside WT N = Nipples H = Handwheel 4F = 4 Way Floater F = Fluorosilicone M/TC = Metal Tungsten Carbide QPQ Inturnal O = ODD L = Lever 4T = 4 Way Trunnion G = Grafoil N = Nylon Slam Retard R = RF O = Oil/Gas FF = Full Floater H = HNBR O = Nova Stancoat S = SW S = S/Return FT = Full Trunnion N = Neoprene P = PEEK Sub Sea T = TH Y = Hydraulic L = Lubricated P = Polyuerethane R = RPTFE Teflon Lined W = WE RF = Red, Floater R = NBR S = Stellite Top Extension RT = Red, Trunnion S = Silicone T = Teflon Zinc Base SJ = Steam Jacket T = Teflon U = Floursint V = Viton Figure Number Profile 1 2 3 4 5 6 7 8 9 bal 02 01 b 13 13 r l ft No. Figure Number Code Description 1 Valve Type Identifies the valve body design (gate, globe, ball, plug, etc.) 2 Bore Size Identifies nominal port size (1/4 to 78 ) 3 Pressure Class Identifies pressure classes ranging from 50 to 15,000 4 Body/Bonnet Identifies body and bonnet material configuration (bolted bonnet, pressure seal, top entry, etc.) 5 Body Material Identifies body material composition (A105, WCB, Stainless Steel, F51, etc.) 6 Trim Material Identifies trim material composition (ENP, 316, F6, Cr13, HF, etc.) 7 Ends Identifies end connection configuration (weld end, RTJ, socket weld, hub, etc.) 8 Operation Identifies valve operation mechanism (electric, gear, hydraulic, lever, etc.) 9 Configuration (ball only) Identifies valve configuration (floater, trunnion, etc.) Sample Figure Numbers & Descriptions Valve Type Sample Figure # Description Trunnion Ball bal0201b1313rlft Ball Valve, 2, 150#, Bolted Bonnet, A105 Body, ENP Trim, Raised Face, Lever Operated, Full Port, Trunnion Mtd. Floating Ball bal0201b1036rlff Ball Valve, 2, 150#, Bolted Bonnet, A216 WCB Body, 316SS Trim, Raised Face, Lever Oper., Full Port, Floating Ball Dual Plate Wafer Check dck0406w1036r Dual Plate Wafer Check, 4, 600#, Wafer Style, A216 WCB Body, 316SS Trim, Raised Face Full Port Swing Check fck0409b1036j Full Port Swing Check, 4, 900#, Bolted Bonnet, A216 WCB Body, 316SS Trim, Ring Type Joint Wedge Gate gat0303p1011rh Wedge Gate, 3, 300#, Pressure Seal, WCB, Cr13/HF, Raised Face, Hand Wheel Operated Globe glb0803b1011rh Globe, 8, 300#, Bolted Bonnet, WCB, Cr13/HF, Raised Face, Hand Wheel Operated Swing Check sck0601b1036r Swing Check, 6, 150#, Bolted Bonnet, WCB, 316SS Trim, Raised Face Lubricated Plug plg0803b1011rl Lubricated Plug Valve, 8, 300#, Bolted Bonnet, WCB, Cr13/HF Trim, Raised Face, Lever Operated Dual Seal Plug dsp0803b1011rg Dual Seal Plug, 8, 300#, bolted Bonnet, WCB, Cr13/HF Trim, Raised Face, Gear Operated Thru Conduit Gate tcg0603b1036rg Thru Conduit Gate, 6, 300#, Bolted Bonnet, WCB, 316SS Trim, Raised Face, Gear Operated Expanding Gate tcg0603b1036rg-exp Thru Conduit Gate, 6, 300#, Bolted Bonnet, WCB, 316SS Trim, Raised Face, Gear Operated, Expanding Rising Stem Ball rsb1006b1036rg Rising Stem Ball, 10, 600#, Bolted Bonnet, WCB Body, 316SS Trim, Raised Face, Gear Operated ii

Technical Data for Optional Seal & Seat Selections Optional Seal Selections Code Material Description B BUNA Also called Buna N or Nitrile, this sealing material is widely used because of its compatability with most hydraulic fluid media, including petroleum oils, water, water glycol, Di-Ester based fluids, air, and inactive gases. The temperature of this material ranges from -54C to +135C (-65F to +275F). N NEOPRENE This sealing material is excellent for refrigerants, amonia, and freon. Its temperature range is from -37C to +107C (-35F to +225F). E EPDM Also called Ethylene-Propylene, this sealing material is recommended for low pressure steam, hot water, phosphate ester base fluid, weak alkalines, and acids. This material is not recommended for petroleum service, hydrocarbons, alchohol, and radiation. Its temperature range is -54C to 149C (-65F to +250F). V VITON Also called Fluorocarbon Rubber (FKM), this material is known for being excellent in condition up to +204C (+400F). Viton offers excellent resistence to aggressive fuels and chemicals. T PTFE Teflon has excellent resistence to a wide range of chemicals. It is excellent at pressures below 1500 PSI. It can withstand temperatures up to +204C(+400F). R NBR NBR is typically resistant to mineral oil-based lubricants and greases, hydraulic fluids, hydrocarbons, and water. NBR is not resistant to polar solvents or chlorinated hydrocarbons. The material s temperature range is from -30C to +100C (-22F to +212F). H HNBR HNBR is simply hydrogenated NBR. It is typically resistant to mineral oil-based lubricants and greases, hydraulic fluids, hydrocarbons, and water just like NBR. HNBR is more resistent to heat, o-zone, and aging than NBR. The material s temperature range is from -30C to +100C (-22F to +212F). S SILICONE This material is capable of operating in a wide temperature range and has excellent resistence to o-zone, water, weathering, and aging. This material is generally not resistent to fuels, oils, steams, acids, or high pressures. This materials temperature range is from -65C to +250C (-85F to +482F). F FLUOROSILICONE This material is far more resistent to oils and fules than other silicones. The temperature range, however, is limited from -73C to +177C (-100F to +350F). G GRAPHOIL Grafoil is chemically resistant to attack from nearly all organic and inorganic fluids with exception of highly oxidizing chemicals and highly concentrated oxidizing mineral acids. The material is good up to +538C (+1000F) as well as at cryogenic temperatures. U FLUORSINT This material contains a mica filler and offers superb mechanical properties such as resistence to abrasion, wear, and extrusion. It is ideal for high pressure applications and offers low co-efficient of friction. Its temperature range is from -46C to +343C (-50F to +650F). Note: Additional options available upon request Optional Seat Selections Code Material Description D M-S M-Tc N O P T DEVLON METAL (Stellite) METAL (Tungsten Carbide) NYLON NOVA PEEK TEFLON (VIRGIN PTFE) Devlon is a polyamide with additives which allow it to perform at -46C to +121C (-50F to +250F). This material covers a wide range of applications while having excellent wear poperties, low friction, and improved impact strength. Metal seats hardfaced with Stellite 6 are recommended for use in high temperature fluid and gas applications. The temperature range of the material allows it to get up to the maximum temperature of the valve body material. Metal seats hardfaced with Tungsten Carbide are recommended for use in high temperature fluid and gas applications. The temperature range of the material allows it to get up to the maximum temperature of the valve body material. Nylon is offered for high pressure applications. The material is ideal for use in high pressure air, oil, and other gas media but is not suitable for strong oxidizing agents. The temperature range of this material is -34C to +121C (-29F to +250F). This Teflon based product is filled with glass amorphous carbon powder and graphite. It has a lower thermal contractionexpansion than PTFE and is ideal for steam or thermal fluid applications up to +288C (+550F). Peek offers a unique combination of chemical, mechanical, and thermal properties. This material is excellent for high temperatures up to +260C (+500F). PTFE is a fluorocarbon-based polymer. This material has excellent chemical resistance and co-efficient of friction. The material is not recommended for liquid alkalis and flourine. Its temperature range is good from -34C to +204C (-30F to +400F). K R PCTFE RPTFE Kel-F is a fluorocarbon based polymer offering a unique combination of physical and mechanical characteristics such as nonflamability, chemical resistance, and near zero moisture absorbtion. The temperature range of this material is from -240C to +204C (-400F to +400F). PTFE s mechanical properties are enhanced by adding a percentage of filler material to provide improved strength, stability, and wear resistance. The temperature range of this material is -46C to +232C (-50F to +450F). Note: Additional options available upon request iii

Seal & Seat Pressure Temperature Chart This chart depicts pressure and temperature ratings for common plastics and elastomers used in Southern California Valve products. 7000 6000 5000 4000 3000 2000 1000 0 PSI Temp F 0 50 100 150 200 250 275 300 350 400 450 500 550 600 PEEK VITON BUNA EPDM NYLON/DEVLON G-PTFE PTFE iv

Valve ID Tag & Valve Markings Identification Valve ID Tag 1 2 3 4 5 6 7 8 9 11 10 12 ISO 14313 No. Figure Number Code Description 1 Serial Number Identifies certified manufacturers serial number 2 Figure Number Identifies the detailed valve configuration (valve type, bore size, pressure class, materials, etc.) 3 Size Identifies bore size 4 Pressure Class Identifies pressure classifications per API requirements 5 Body Material Identifies body metal material composition (A105, WCB, F51, CF8M, etc.) 6 Stem Material Identifies stem material composition (A105, 410SS, 17-4pH, etc.) 7 Ball/Disc Material Identifies ball/disc material composition (A105, 316SS, ENP, etc.) 8 Seat Material Identifies seat material composition (PEEK, Teflon, Nylon, etc.) 9 Manufacturing Date Identifies the date the valve manufacturing completion date 10 API Conformance Identifies API conformance (600, 6D, 6A, etc.) 11 Maximum Temperature F Identifies the maximum operating temperature in Fahrenheit 12 Max. Operating Pressure Identifies the maximum operating pressure in PSI. Valve Markings No. Valve ID Components 1 Tag 2 Brand 3 Size 4 Pressure Class 5 Body Material 6 Heat Number 1 2 3 4 5 6 8 300 A105 B113H v

13903 Maryton Avenue Santa Fe Springs, CA 90670 Phone: 800-554-6421 Fax: 562-356-2849 www.scvvalves.com Email: sales@scvvalve.com MANUFACTURING FACILITY SCV SALES AND PROJECT OFFICE Friendswood, TX 77546 Phone: 281-482-4728 Fax: 281-482-9728 Email:sales@scvvalve.com COMPANY PROFILE Southern California Valve was established in 1972. The primary focus of the Company was to provide full inline field service for valve maintenance as well as in house valve modifications. While serving the Power Industry, Paper & Pulp, Oil & Gas, and the Petro Chemical Industry; through years of dedication and commitment to quality and service, Southern California Valve has become one of the largest West Coast full range, field service companies, with a reputation for superior quality. In the mid 1970s, Southern California Valve entered the valve manufacturing industry, primarily serving the Power Industry. Since that time, Southern California Valve has expanded their products to cover a broad range of valves. Southern California Valve holds the API 6A & API 6D Monogram, API Q1 Quality Management System, and ASME R stamp. The Corporate office and manufacturing facility is located in Santa Fe Springs, California. The Sales and Projects office is located in Friendswood, Texas. The product lines include commodity valves as well as specialty valves in all Sizes & Pressure Classes & Metallurgy; including Carbon Steel, Stainless Steel & Exotic Alloys. The valve types include Gate, Globe, Swing Check - Bolted Bonnet & Pressure Seal Bonnet, Ball - both floating and trunnion, Thru-Conduit Gate - slab and expanding, Swing Check - Full Port, Plugs, Wafer Checks and Butterfly s. Before the SCV name is attached to any valve; Southern California Valve s High Quality Standards demands 100% pressure testing of every valve to insure its reliability. At Southern California Valve, we pride ourselves with high quality products in the commodity and specialty valve lines, as well as, timely deliveries, and competitive prices. Sincerely, Don Bullard, Jr./President 1 Note: SCV reserves the right to modify our products for improvement without prior notice.

Standard Wedge Gate Valves Carbon & Stainless Steel Sizes 2-52 Class 150-2500 Design and Manufacturing Standards Basic Design API 600 & ANSI B 16.34 Shell Wall Thickness API 600 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 2

Carbon & Stainless Steel Wedge Gate Valves Class 150-2500 2-52 15 29 27 28 21 11 12 7 16 19 5 17 23 23 26 13 14 9 8 20 24 2 22 W CARBON & STAINLESS STEEL WEDGE GATE VALVES A3 L W 1 4 3 A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A2I7-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 STEM A182-F60 A182-F60 A182 -F6a A182-F6a A182-F304 F316 F347 7 BONNET BUSH A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 8 PACKING GLAND A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 9 GLAND FLANGE A105 A] 05 A105 A105 A350 - LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C B147-B8 F316 F347 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 13 GLAND BOLT A193-B7 A193-B7 A] 93-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-4 A194-2H A194-8 A194-8 15 HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A395 20 HINGE PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 21 PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 24 LANTERN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 26 YOKE A216-WCB 216-WC6 216-WC9 A216-C5 A352-LC1/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 29 BEARING COMMERCIAL 3

CARBON & STAINLESS STEEL WEDGE GATE VALVES CLASS 150 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40 42 48 52 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 1016 1067 1219 1321 in 7.0 7.5 8.0 9.0 10.5 11.5 13.0 14.0 15.0 16.0 17.0 18.0 20.0 24.0 24.0 28.0 30.0 31.0 34.0 36.0 mm 178 191 203 229 267 292 330 356 381 406 432 457 508 610 610 711 762 813 864 914 in 8.5 9.5 11.12 12.0 15.87 16.5 18.0 19.8 22.5 24.0 26.0 28.0 32.0 36.0 36.0 40.0 42.0 43.0 46.0 54 mm 216 241 282 305 403 419 457 503 572 610 660 711 813 914 914 1016 1067 1092 1168 1372 in 7.0 7.5 8.0 9.0 10.5 11.5 13.0 14.0 15.0 16.0 17.0 18.0 20.0 24.0 24.0 28.0 30.0 31.0 34.0 36.0 mm 178 190 203 229 267 292 330 356 381 406 432 457 508 610 610 711 762 813 864 914 in 15.4 16.7 18.1 22.8 30.6 38.4 46.4 54.6 60.0 68.7 79.1 91.7 109.6 127.4 134.5 161.8 183.9 174.4 217.5 227 mm 390 425 461 580 776 976 1178 1387 1523 1745 2010 2330 2784 3236 3417 4109 4670 4430 5525 5766 in 7.9 7.9 7.9 9.8 11.8 14.0 17.7 17.7 19.7 22.0 13.8 17.7 17.7 22.0 22.0 27.9 31.5 31.5 35.4 35.4 mm 200 200 200 250 300 355 450 450 500 560 350 450 450 560 560 710 800 800 900 900 in - - - - - - - - - - 13.1 14.3 14.3 16.3 16.3 18.4 20.7 20.7 26.4 26.4 mm - - - - - - - - - - 332 362 362 414 414 468 526 526 670 670 Ib 48.5 55.1 66.2 99.2 187 295.5 445 639 816 1177 1475 1786 3153 4558 4827 7856 10370 10143 15677 18742 kg 22 25 30 45 85 134 202 290 370 534 669 810 1430 2067 2189 3563 4703 4600 7110 8500 Ib 44.1 46.3 61.7 92.6 161 244 399 584 750 1111 1365 1697 3336 4756 4981 8011 10436 10198 15545 18853 kg 20 21 28 42 73 111 181 265 340 504 619 770 1513 2157 2259 3633 4733 4625 7050 8550 CLASS 300 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40 42 48 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 1016 1067 1219 A1 A2 (RTJ) A3 W L in 8.5 9.5 11.12 12.0 15.9 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 53.0 55.0 68.0 76.0 78.0 87.2 mm 216 241 282 305 404 419 457 502 762 838 914 991 1143 1346 1397 1727 1930 1981 2215 in 9.12 10.12 11.75 12.62 16.5 17.12 18.62 20.37 30.62 33.62 36.62 39.75 45.88 54.0 56.0 69.12 - - - mm 232 257 298 321 419 435 473 518 778 854 930 1010 1165 1372 1422 1756 - - - in 8.5 9.5 11.12 12.0 15.9 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 53.0 55.0 68.0 76.0 78.0 87.2 mm 216 241 282 305 404 419 457 502 762 838 914 991 1143 1346 1397 1727 1930 1981 2215 in 16.2 17.7 19.0 23.7 32.0 40.2 48.8 56.8 66.1 78.4 85.9 93.5 112.6 130.0 148.5 169.8 188.6 198.1 217.4 mm 412 450 483 601 813 1020 1239 1443 1679 1993 2181 2376 2860 3302 3772 4312 4791 5032 5522 in 7.9 7.9 S.8 9.8 14.0 15.7 17.7 19.7 17.7 17.7 22.0 22.0 27.9 35.4 35.4 30.0 30.0 30.0 30.0 mm 200 200 224 250 355 400 450 500 450 450 560 560 710 900 900 760 760 760 760 in - - - - - - - - 14.3 14.3 16.3 16.3 18.4 21.8 21.8 21.8 20.2 20.2 20.2 mm - - - - - - - - 362 362 414 414 468 554 554 554 512 512 512 Ib 63.9 88.2 105.8 163.2 313.1 485.1 721.0 1094 1530 2170 2880 3409 5204 8070.3 9591.6 15104.3 18654.3 20947.5 27342 kg 29 40 48 74 142 220 327 496 694 984 1306 1546 2360 3660 4350 6850 8460 9500 12400 Ib 52.9 77.2 81.6 141.1 269.0 379.2 511.6 862 1420 1839 2317 2703 4212 6637.1 7629.3 11003 13582.8 14994 19845 kg 24 35 37 64 122 172 232 391 644 834 1051 1226 1910 3010 3460 4990 6160 6800 9000 4

CARBON & STAINLESS STEEL GATE VALVES CLASS 600 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40 42 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 1016 1067 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 61.0 65.0 82.0 94.0 98.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1594 1651 2083 2387 2489 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 61.5 65.5 82.62 - - mm 295 333 359 435 562 664 791 841 892 994 1095 1200 1406 1562 1664 2098 - - in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 61.0 65.0 82.0 94.0 98.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1594 1651 2083 2387 2489 in 18.5 19.5 22.1 26.7 37.2 43.7 52.1 65.9 72.1 82.9 98.0 104.8 116.9 140.2 152.8 179.5 207.6 240.0 mm 471 495 561 677 944 1110 1323 1675 1832 2106 2489 2662 2970 3562 3880 4560 5273 6098 in 8.8 8.8 9.8 11.8 17.7 19.7 24.8 22.0 22.0 27.9 27.9 31.5 35.4 30.0 30.0 30.0 30.0 30.0 mm 224 224 250 300 450 500 630 560 560 710 710 800 900 760 760 760 760 760 in - - - - - - - 16.3 16.3 18.4 18.4 20.7 26.4 20.2 20.2 20.2 20.2 20.2 mm - - - - - - - 414 414 468 468 526 670 512 512 512 512 512 Ib 94.8 132.3 154.4 295.5 628 988 1499 2355 2836 4059 5700 6853 10337 13340.6 15313.7 21476.7 23262.8 24144.8 kg 43 60 70 134 285 448 680 1068 1286 1841 2585 3108 4688 6050 6945 9740 10550 10950 Ib 61.7 99.2 132.3 229.3 452 690 1180 2145 2571 3332 4741 5640 8595 10980.9 12590.6 17948.7 18830.7 19337.9 kg 28 45 60 104 205 313 535 973 1166 1511 2150 2558 3898 4980 5710 8140 8540 8770 CLASS 900 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 mm 371 422 384 460 612 740 841 968 1038 1140 1232 1333 1568 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 in 21.2 26.4 26.4 30.8 42.4 55.5 67.7 77.4 74.9 80.7 88.8 110.2 124.0 mm 539 670 672 782 1076 1411 1720 1965 1902 2051 2256 2800 3150 in 11.8 11.8 14.0 15.7 22.0 17.7 22.0 22.0 24.0 24.0 30.0 30.0 24.0 mm 300 300 355 400 560 450 560 560 610 610 760 760 610 in - - - - - 14.3 16.3 16.3 20.2 20.2 21.8 21.8 20.2 mm - - - - - 362 414 414 512 512 554 554 512 Ib 181 342 364 384 999 1720 2752 3400 4895.1 6615.0 8533.4 10716.3 16096.5 kg 82 155 165 174 453 780 1248 1542 2220 3000 3870 4860 7300 Ib 130 375 287 295 789 1378 2267 2844 4167.5 5655.8 7276.5 8730.3 13494.6 kg 59 170 130 134 358 625 1028 1290 1890 2565 3300 4050 6120 5

CARBON & STAINLESS STEEL GATE VALVES CLASS 1500 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 706 832 991 1130 1257 1384 1536 1664 1943 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.62 mm 371 422 473 549 711 841 1000 1146 1276 1406 1559 1686 1972 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 706 832 991 1130 1257 1384 1536 1664 1943 in 21.2 26.4 29.1 30.8 47.1 60.8 66.5 82.3 85.1 97.9 108.7 122.1 146.5 mm 539 670 738 783 1196 1546 1688 2090 2162 2486 2762 3102 3721 in 11.8 11.8 15.7 19.7 13.8 22.0 27.9 27.9 30.0 30.0 30.0 24.0 24.0 mm 300 300 400 500 350 560 710 710 760 760 760 610 610 in - - - - 13.1 16.3 18.4 18.4 21.8 21.8 21.8 20.2 20.2 mm - - - - 332 414 468 468 554 554 554 512 512 Ib 181 341.8 401 573 1360 3175 4412 8414 9073.6 15324.8 19845 24541.7 35875.4 kg 82 155 182 260 617 1440 2001 3816 4115 6950 9000 11130 16270 Ib 130 286.7 324 353 975 2646 3541 7080 7056 13230 17066.7 21079.8 30362.9 Kg 59 130 147 160 442 1200 1606 3211 3200 6000 7740 9560 13770 CLASS 2500 - CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 mm 51 64 76 102 152 203 254 305 In 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 17.87 20.25 23.0 26.8 36.5 40.87 50.88 56.88 mm 454 514 584 683 927 1038 1292 1445 In 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 24.4 31.9 31.9 42.2 57.1 63.0 82.5 90.2 mm 619 809 809 1073 1451 1600 2096 2292 in 11.8 17.7 17.7 24.8 24.0 24.0 24.0 30.0 mm 300 450 450 630 610 610 610 760 in - - - - 17.0 20.2 20.2 21.8 mm - - - - 432 512 512 554 lb 205 331 443 1336 3506 5380.2 10085.7 15831.9 kg 93 150 201 606 1590 2440 4574 7180 lb 128 221 289 1083 2866.5 4410 8379 13230 kg 58 100 131 491 1300 2000 3800 6000 6

Pressure Seal Gate Valves Carbon & Stainless Steel Sizes 2-24 Class 600-2500 Design and Manufacturing Standards Basic Design ANSI B 16.34 Face to Face Dimension ANSI B16.10 End Flanges Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 7

Carbon & Stainless Steel Pressure Seal Gate Valves Class 600-2500 2-24 CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES L W 15 34 16 19 10 17 23 29 13 14 9 8 W 27 28 26 11 5 21 32 12 35 33 37 22 2 A2 (RTJ) 1 4 Bill of material NO NAME OF PART 3 ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A 105+ HARD FACE A182-F11 A182-F22 A182-F50 A182-F304 F316 F347 5 STEM A182-F6d A182-F60 A182-F6Q A182-F6Q A182-F304 F316 F347 8 PACKING GLAND A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A350 - LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C B147-B8 F316 F347 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 13 GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A194-8 15 HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A395 21 PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 26 YOKE A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 29 BEARING COMMERCIAL 32 PACKING WASHER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 33 RETA1NER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 34 HINGE CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 35 BONNET CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 37 GASKET SPACER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 A3 A1 8

CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES CLASS 600 - CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 7.0 8.5 10.0 12.0 18.0 23.0 28.0 32.0 35.0 39.0 43.0 47.0 55.0 mm 178 216 254 305 457 584 711 813 889 991 1092 1194 1397 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 mm 292 330 356 432 556 660 787 838 889 991 1092 1194 1397 In 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 mm 295 333 359 435 562 663 790 841 892 994 1095 1200 1407 in 23.2 24.8 26.3 36.0 42.5 49.9 59.5 70.5 73.1 85.1 88.6 97.2 118.1 mm 590 629 667 914 1080 1267 1511 1791 1857 2162 2251 2470 3000 in 7.9 9.8 9.8 11.8 19.7 22.0 27.2 35.8 24.0 24.0 24.0 24.0 30.0 mm 200 250 250 300 500 560 690 610 610 610 610 610 760 in - - - - - - - 17.0 17.0 20.2 20.2 20.2 21.8 mm - - - - - - - 432 432 512 512 512 554 lb 154.4 209.5 220.5 326.3 540.2 705.6 948.2 1135.6 1477.4 1995.5 2535.8 3186.2 4586.4 kg 70 95 100 148 245 320 430 515 670 905 1150 1445 2080 lb 136.7 176.4 185.2 253.6 377.1 474.1 590.9 701.2 959.2 1256.9 1587.6 1962.5 2833.4 kg 62 80 84 115 171 215 268 318 435 570 720 890 1285 CLASS 900 - CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 mm 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 in 8.5 10.0 12.0 14.0 20.0 26.0 31.0 36.0 39.0 43.0 46.5 50.5 59.5 mm 216 254 305 356 508 660 787 914 991 1092 1181 1283 1511 in 23.4 29.6 29.8 34.0 39.9 50.2 60.7 70.1 79.8 89.0 97.2 108.3 127.6 mm 594 753 756 864 1013 1276 1543 1781 2026 2261 2470 2750 3242 in 11.8 17.7 17.7 19.7 22.0 18.1 24.0 24.0 24.0 24.0 29.9 29.9 24.0 mm 300 450 450 500 560 460 610 610 610 610 760 760 610 in - - - - - 16.8 17.0 20.2 20.2 20.2 21.8 21.8 20.1 mm - - - - - 427 432 512 512 512 554 554 512 Ib 132.3 207.3 224.9 330.8 617.4 1455.3 2116.8 2976.8 3748.5 5292 7320.6 9702.0 14927.9 kg 60 94 102 150 280 660 960 1350 1700 2400 3320 4400 6770 Ib 88.2 141.1 176.4 220.5 407.9 1091.5 1620.7 2315.3 3087.0 4299.8 6019.7 8125.4 11973.2 Kg 40 64 80 100 185 495 735 1050 1400 1950 2730 3685 5430 9

CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES CLASS 1500 - CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 8.5 10.0 12.0 16.0 22.0 28.0 34.0 39.0 42.0 47.0 53.0 58.0 64.0 mm 216 254 305 406 559 711 864 991 1067 1194 1346 1473 1626 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 705 832 991 1130 1257 1384 1537 1664 1943 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.62 mm 371 422 473 549 711 841 1000 1146 1276 1406 1559 1686 1972 in 23.4 29.6 29.6 34.0 48.0 51.6 64.8 77.8 87.2 91.8 111.1 122.1 148.3 mm 594 753 753 864 1219 1311 1645 1975 2216 2331 2823 3102 3766 in 11.8 17.7 17.7 19.7 24.0 24.0 24.0 24.0 29.9 29.9 29.9 24.0 24.0 mm 300 450 450 500 610 610 610 610 760 760 760 610 610 in - - - - 17.0 17.0 20.2 20.0 21.8 21.8 21.8 20.2 20.2 mm - - - - 432 432 512 512 554 554 554 512 512 Ib 132.3 207.3 264.6 458.6 1058.4 2006.6 3109.1 4586.4 5755.1 7938 13141.8 16250.9 23395.1 kg 60 94 120 208 480 910 1410 2080 2610 3600 5960 7370 10610 Ib 88.2 141.1 176.4 326.3 749.7 1499.4 2249.1 3197.3 3969 6063.8 10209.2 12612.6 18169.2 kg 40 64 80 148 340 680 1020 1450 1800 2750 4630 5720 8240 CLASS 2500 - CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 14 16 18 mm 51 64 76 102 152 203 254 305 356 406 457 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 44 49 55 mm 451 508 578 673 914 1022 1270 1422 1118 1245 1397 in 11 13 14.5 18 24 30 36 41 44 49 55 mm 279 330 368 457 610 762 914 1041 1118 1245 1397 in 17.87 20.25 23.0 26.8 36.5 40.87 50.88 56.88 - - - mm 454 514 584 683 927 1038 1292 1445 - - - in 23.4 29.6 29.6 34.3 47.3 57.1 63.4 82.5 90.2 97.2 116.1 mm 594 753 753 870 1201 1451 1610 2096 2291 2470 2950 in 14.0 17.7 19.7 23.6 24.0 24.0 24.0 29.9 29.9 24.0 24.0 mm 355 450 500 600 610 610 610 760 760 610 610 in - - - - 17.0 20.2 20.2 21.8 21.8 20.2 20.2 mm - - - - 432 512 512 554 554 512 512 lb 172.1 273.4 334.1 702.7 1640.3 2673 48074 6925.5 - - - kg 85 135 165 347 810 1320 2374 3420 - - - lb 101.3 182.3 1924 384.8 1053 1498.5 3240 6075 6885 8505 10125 kg 50 90 95 190 520 740 1600 3000 3400 4200 5000 10

Thru Conduit Slab & Expanding Gate Valves Cast Steel Sizes 2-36 Class 150-2500 Design and Manufacturing Standards Basic Design API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 11

Thru Conduit Slab & Expanding Gate Valves Class 150-2500 THRU CONDUIT SLAB GATE VALVES 2-36 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES 35 Bill of Materials 8 34 33 32 31 29 28 27 10 26 17 14 16 15 13 12 14 9 5 30 11 21 22 25 24 23 20 19 18 6 7 4 1 2 3 No. Part Material 1 Body ASTM A216 WCC 2 Body Drain Port - 3 Body Drain Plug 1025 4 Slab Disc ASTM A105+ENP 5 Seat ASTM A105+ENP+Nylon 6 Sealant Injector Port - 7 Sealant Injector Fitting 1025 8 Seat Spring Inconel x-750 9 Seat O-Ring Viton 10 Back Seat ASTM A182 F6A+Viton 11 Stem ASTM 182 F6A 12 Bonnet Gasket 1010 13 Stud Bolt ASTM A193 B7M 14 Nut ASTM A194 2HM 15 Bonnet ASTM A216 WCC 16 Bonnet Vent Port - 17 Bonnet Vent Plug 1025 18 Packing Seat 1025 19 Packing Rings PTFE 20 Lantern Ring 304 21 Packing Injector Port - 22 Packing Injector Fitting 1025 23 Packing Rings PTFE 24 UP Packing 1025 25 Graphite Packing Graphite 26 Stud Bolt ASTM A193 B7M 27 Nut ASTM A194 2HM 28 Yoke ASTM A216 WCC 29 Stem Nut Bronze 30 Bearings Steel 31 Stem Nut Retainer 1025 32 Handwheel Steel 33 Handwheel Nut Steel 34 Stem Protector Steel 35 Stem Indicator Stainless Steel 12

Slab Gate Advanced Mechanical Details CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Features Overview Through its simple design and efficient performance, the slab gate s two spring loaded floating seats are pressure energized. This allows for complete sealing, both upstream and downstream. Figure 1 Slab Seats Soft & Metal The spring loaded double O-ring design seats maintain a perfect seal with the gate in both low and high pressure applications. The soft seat inserts help to ensure that the primary sealing occurs at the gate. In the event of soft seat damage, the seating of metal to metal will function as a secondary seal. (Figure 1) Figure 2 Slab Metal-to-metal Contact Seat Ring Double Block When the valve is in the closed position and also has equal or no pressure, both spring loaded seats can shut off line pressure independently of upstream and downstream pressure. This creates a double block scenario. (Figure 2) When line pressure is applied, the pressure forces the slab gate to float against the downstream seat and form a tight seal. At the same time, the upstream line pressure forces the upstream seat on the slab gate to form an upstream seal. (Figure 3) Figure 3 Seat O-ring Slab Body Spring Seat Insert Seat Ring Self Relieving Cavity The double block and bleed slab gate design, in the closed position, may experience an increase in cavity pressure due to thermal expansion. When the cavity pressure exceeds the line pressure, the seat is forced away from the gate surface allowing the excess cavity pressure to be vented into the line. This allows for a pressure balance between the body cavity and the line. (Figure 4) Seat O-ring Body Spring Seat Insert Secondary Sealant Injection System Valves 6 and larger will have secondary sealant injection fittings for the stem and seats. If the seat inserts or stem O-rings become damaged, leakage from the seat and stem can be prevented by injecting sealant into the fittings. (Figure 5) Packing Bonnet Figure 4 Slab Stem Injection Seat Insert Line Pressure Stem Lantern Ring Seat Ring Gate Packing Cavity Pressure Seat O-ring Seat Injection Body 13

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Thru Conduit Slab & Expanding Gate Valves Class 150-2500 THRU CONDUIT EXPANDING GATE VALVES 2-36 35 Bill of Materials 34 33 32 31 29 28 27 10 26 17 14 16 15 13 12 14 9 6 30 11 21 22 25 24 23 20 19 18 7 8 5 4 1 2 3 No. Part Material 1 Body ASTM A216 WCC 2 Body Drain Port - 3 Body Drain Plug 1025 4 Expanding Disc Gate ASTM A105+ENP 5 Expanding Disc Segment ASTM A105+ENP 6 Seat ASTM A105+ENP+Nylon 7 Sealant Injector Port - 8 Sealant Injector Fitting 1025 9 O-Ring Viton 10 Back Seat ASTM A182 F6A+Viton 11 Stem ASTM 182 F6A 12 Bonnet Gasket 1010 13 Stud Bolt ASTM A193 B7M 14 Nut ASTM A194 2HM 15 Bonnet ASTM A216 WCC 16 Bonnet Vent Port - 17 Bonnet Vent Plug 1025 18 Packing Seat 1025 19 Packing Rings PTFE 20 Lantern Ring 304 21 Packing Injector Port - 22 Packing Injector Fitting 1025 23 Packing Rings PTFE 24 UP Packing 1025 25 Graphite Packing Graphite 26 Stud Bolt ASTM A193 B7M 27 Nut ASTM A194 2HM 28 Yoke ASTM A216 WCC 29 Stem Nut Bronze 30 Bearings Steel 31 Stem Nut Retainer 1025 32 Handwheel Steel 33 Handwheel Nut Steel 34 Stem Protector Steel 35 Stem Indicator Stainless Steel 14

Expanding Gate Advanced Mechanical Details CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Features Overview The SCV Expanding Gate valve design provides a mechanical seal between the seats and the gate in both high and low pressure applications. The expanding gate valve does not require line pressure to seal and is recommended when a tight mechanical seal is required. Figure 1 Seat Rings Sealant Injector Fitting Disc Segment Stop Full Expanded Closed In the full expanded closed position, the segment stop has engaged with the lower body stop and the gate is wedged downward, expanding the gate and segment to form a tight seal against the upstream and downstream seats. Body cavity venting will assist to provide tight shut off. (Figure 1) Mid Position When operating towards the open position, the gate travels across the wedge angle of the segment. This retracts the assembly so that is will slide freely between the seat faces. (Figure 2) Disc Gate Disc Segment Full Expanded Open In the full expanded open position, the segment stop has engaged the upper body stop and the gate is wedged upward. This expands the segment and the gate into the seats, isolating the flow from the cavity. (Figure 3) Figure 2 Figure 3 15

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS 150 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS (Expanding gate valve dimensions are upon request.) END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 7 8.5 7.5 4.80 17.72 12.40 9.84 - - - 75 MM 50 178 216 191 122 450 315 250 - - - 34 IN 2.5 7.5 9.5 8 6.06 21.65 16.54 11.81 - - - 90 MM 65 190 241 203 154 550 420 300 - - - 41 IN 3 8 11.12 8.5 6.65 24.02 16.85 11.81 - - - 123 MM 80 203 283 216 169 610 428 300 - - - 56 IN 4 9 12 9.5 7.60 27.56 19.45 11.81 30.31 25.59 12.20 185 MM 100 229 305 241 193 700 494 300 770 650 310 84 IN 6 10.5 15.88 11 11.14 35.24 24.61 13.78 37.99 31.50 12.20 313 MM 150 267 403 279 283 895 625 350 965 800 310 142 IN 8 11.5 16.5 12 13.86 44.49 30.87 13.78 47.24 37.80 12.20 520 MM 200 292 419 305 352 1130 784 350 1200 960 310 236 IN 10 13 18 13.5 17.32 50.79 36.87 15.75 53.54 42.52 12.20 776 MM 250 330 457 343 440 1290 937 400 1360 1080 310 352 IN 12 14 19.75 14.5 20.27 58.27 42.52 17.72 61.42 47.24 12.20 992 MM 300 356 502 368 514 1480 1080 450 1560 1200 310 450 IN 14 15 22.5 15.5 23.70 64.59 50.51 19.69 68.50 53.15 18.11 1323 MM 350 381 572 394 602 1660 1283 500 1740 1350 460 600 IN 16 16 24 16.5 26.69 72.83 55.79 19.69 75.98 59.06 18.11 1623 MM 400 406 610 419 678 1850 1417 500 1930 1500 460 736 IN 18 17 26 17.5 30.91 81.89 58.62 23.62 85.04 66.14 18.11 1962 MM 450 432 660 445 785 2080 1489 600 2160 1680 460 890 IN 20 18 28 18.5 33.66 90.55 65.83 27.56 95.28 72.83 18.11 2469 MM 500 457 711 470 855 2300 1672 700 2420 1850 460 1120 IN 24 20 32 20.5 41.14 105.51 79.21 31.50 110.24 83.46 18.11 4431 MM 600 508 813 521 1045 2680 2012 800 2800 2120 460 2010 IN 30 24 36-53.15 137.44 100.39 39.37 143.31 110.24 18.11 6438 MM 750 610 914-1350 3491 2550 1000 3640 2800 460 2920 IN 36 28 40-59.45 153.43 112.20 39.37 159.45 121.26 23.62 11839 MM 900 711 1016-1510 3897 2850 1000 4050 3080 600 5370 16

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS 300 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 8.5 8.5 9.12 5.93 18.03 12.80 9.84 - - - 119 MM 50 216 216 232 137 458 325 250 - - - 54 IN 2.5 9.5 9.5 10.12 6.65 21.85 16.54 11.81 - - - 150 MM 65 241 241 257 169 555 420 300 - - - 68 IN 3 11.12 11.12 11.74 7.24 24.21 16.93 11.81 - - - 187 MM 80 283 283 298 184 615 430 300 - - - 85 IN 4 12 12 12.62 8.58 27.95 19.69 11.81 30.31 25.59 12.20 247 MM 100 305 305 321 218 710 500 300 770 650 310 112 IN 6 15.88 15.88 16.5 12.24 34.43 24.61 13.78 37.99 31.50 12.20 529 MM 150 403 403 419 311 900 625 350 965 800 310 240 IN 8 16.5 16.5 17.12 15.04 44.68 31.10 13.78 47.24 37.80 12.20 805 MM 200 419 419 435 382 1135 790 350 1200 960 310 365 IN 10 18 18 18.62 18.74 55.16 40.94 15.75 53.54 42.91 12.20 1102 MM 250 457 457 473 476 1401 1040 400 1360 1090 310 500 IN 12 19.75 19.75 20.37 21.46 62.20 45.28 15.75 61.42 47.24 12.20 1669 MM 300 502 502 518 545 1580 1150 400 1560 1200 310 757 IN 14 30 30 30.62 25.39 - - - 68.50 53.15 18.11 2315 MM 350 762 762 778 645 - - - 1740 1350 460 1050 IN 16 33 33 33.62 28.66 - - - 75.98 60.63 18.11 3263 MM 400 838 838 854 728 - - - 1930 1540 460 1480 IN 18 36 36 36.62 31.50 - - - 85.04 66.93 18.11 4497 MM 450 914 914 930 800 - - - 2160 1700 460 2040 IN 20 39 39 39.75 36.61 - - - 95.28 72.83 18.11 5942 MM 500 991 991 1010 930 - - - 2420 1850 460 2650 IN 24 45 45 45.88 43.31 - - - 110.24 83.46 18.11 9392 MM 600 1143 1143 1165 1100 - - - 2800 2120 460 4260 IN 30 55 55 56 55.91 - - - 143.31 110.24 18.11 13889 MM 750 1397 1397 1422 1420 - - - 3640 2800 460 6300 IN 36 68 68 69.12 59.45 - - - 159.45 121.26 23.32 19621 MM 900 1727 1727 1756 1510 - - - 4050 3080 600 8900 17

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS 600 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 11.3 11.3 11.62 6.22 18.43 13.19 11.81 19.88 16.93 12.20 146 MM 50 292 292 295 158 468 335 300 505 430 310 66 IN 2.5 13 13 13.12 7.48 22.24 16.93 11.81 22.05 18.50 12.20 205 MM 65 330 330 333 190 565 430 300 560 470 310 93 IN 3 14 14 14.12 8.86 24.61 17.32 13.78 24.02 20.09 12.20 243 MM 80 356 356 359 225 625 440 350 610 510 310 110 IN 4 17 17 17.12 10.14 28.35 20.08 13.78 30.31 25.59 12.20 344 MM 100 432 432 435 255 720 510 350 770 650 310 156 IN 6 22 22 22.12 12.99 35.83 24.80 15.75 37.99 31.50 12.20 635 MM 150 559 559 562 330 910 630 400 965 800 310 296 IN 8 26 26 26.12 16.14 45.08 31.50 19.69 47.24 37.80 12.20 1411 MM 200 660 660 664 410 1145 800 500 1200 960 310 640 IN 10 31 31 31.12 19.29 55.55 41.34 19.69 53.94 42.91 18.11 1984 MM 250 787 787 791 490 1411 1050 500 1370 1090 460 900 IN 12 33 33 33.12 22.44 62.60 45.67 23.62 61.42 47.24 18.11 2502 MM 300 838 838 841 570 1590 1160 600 1560 1200 460 1135 IN 14 35 35 35.12 25.59 - - - 68.50 53.15 18.11 3748 MM 350 889 889 892 650 - - - 1740 1350 460 1700 IN 16 39 39 39.12 28.94 - - - 77.56 60.63 18.11 5181 MM 400 991 991 994 735 - - - 1970 1540 460 2350 IN 18 43 43 43.12 31.89 - - - 88.98 66.93 18.11 6120 MM 450 1092 1092 1095 810 - - - 2260 1700 460 2776 IN 20 47 47 47.25 35.63 - - - 95.28 72.83 18.11 9281 MM 500 1194 1194 1200 905 - - - 2420 1850 460 4210 IN 24 55 55 55.38 45.67 - - - 101.97 79.53 18.11 13250 MM 600 1397 1397 1407 1160 - - - 2590 2020 460 6010 IN 30 65 65 65.5 51 - - - 150 104 24 17439 MM 750 1651 1651 1664 1290 - - - 3821 2654 600 7910 IN 36 82 82 85.62 60 - - - 173 121 24 33510 MM 900 2083 2083 2175 1530 - - - 4400 3070 600 15200 18

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS 900 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 14.5 14.5 14.62 6.22 18.62 13.19 11.81 20.67 17.72 12.20 227 MM 50 368 368 371 158 473 335 300 525 450 310 103 IN 2.5 16.5 16.5 16.62 7.48 22.44 17.13 11.81 23.03 19.29 12.20 298 MM 65 419 419 422 190 570 435 300 585 490 310 135 IN 3 15 15 15.12 8.86 24.80 17.52 13.78 25.00 20.87 12.20 357 MM 80 381 381 384 225 630 445 350 635 530 310 162 IN 4 18 18 18.12 10.04 28.54 20.28 13.78 31.50 26.77 12.20 631 MM 100 457 457 460 255 725 515 350 800 680 310 286 IN 6 24 24 24.12 11.42 36.02 25.20 15.75 39.17 33.95 12.20 1773 MM 150 610 610 613 290 915 640 400 995 830 310 532 IN 8 29 29 29.12 18.11 45.28 31.50 19.69 49.21 39.37 18.11 2138 MM 200 737 737 740 460 1150 800 500 1250 1000 460 970 IN 10 33 33 33.12 22.05 55.75 41.54 19.69 55.91 44.88 18.11 2877 MM 250 838 838 841 560 1416 1055 500 1420 1140 460 1305 IN 12 38 38 38.12 25.98 62.80 45.87 23.62 62.99 48.43 18.11 4409 MM 300 965 965 968 660 1595 1165 600 1600 1230 460 2000 IN 14 40.5 40.5 40.88 30.31 - - - 70.87 55.12 18.11 5732 MM 350 1029 1029 1038 770 - - - 1800 1400 460 2600 IN 16 44.5 44.5 44.88 33.07 - - - 77.82 63.78 18.11 7077 MM 400 1130 1130 1140 840 - - - 2000 1620 460 3210 IN 18 48 48 48.5 36.22 - - - 88.98 70.28 18.11 8818 MM 450 1219 1219 1232 920 - - - 2260 1785 460 4000 IN 20 52 52 52.5 39.37 - - - 99.21 76.77 18.11 11288 MM 500 1321 1321 1334 1000 - - - 2520 1950 460 5120 IN 24 61 61 61.75 47.24 - - - 104.33 82.68 18.11 20723 MM 600 1549 1549 1568 1200 - - - 2650 2100 460 9400 19

CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS 1500 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 14.5 14.5 14.62 6.50 18.90 13.58 13.78 21.26 14.17 12.20 265 MM 50 368 368 371 165 480 345 350 540 360 310 120 IN 2.5 16.5 16.5 16.62 7.99 23.43 17.72 13.78 23.54 19.69 12.20 373 MM 65 419 419 422 203 595 450 350 598 500 310 169 IN 3 18.5 18.5 18.62 9.06 25.59 18.50 15.75 25.59 21.46 18.11 573 MM 80 470 470 473 230 650 470 400 650 545 460 260 IN 4 21.5 21.5 21.62 10.59 29.13 20.67 17.72 31.89 27.95 18.11 838 MM 100 546 546 549 269 740 525 450 810 710 460 380 IN 6 27.75 27.75 28 13.39 38.58 25.59 19.69 42.13 33.07 18.11 2006 MM 150 705 705 711 340 980 650 500 1070 840 460 910 IN 8 32.75 32.75 33.13 16.54 - - - 53.15 41.34 18.11 3351 MM 200 832 832 842 420 - - - 1350 1050 460 1520 IN 10 39 39 39.38 20.08 - - - 58.26 46.46 18.11 5027 MM 250 991 991 1000 510 - - - 1480 1180 460 2280 IN 12 44.5 44.5 45.12 23.23 - - - 66.14 51.18 18.11 7275 MM 300 1130 1130 1146 590 - - - 1680 1300 460 3300 CLASS 2500 - CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN 2 17.75 17.75 17.87 6.50 18.90 13.58 13.78 21.26 14.17 12.20 388 MM 50 451 451 454 165 480 345 350 540 360 310 176 IN 2.5 20 20 20.25 7.99 23.43 17.72 13.78 23.54 19.69 12.20 591 MM 65 508 508 514 203 595 450 350 598 500 310 268 IN 3 22.75 22.75 23 9.06 25.59 18.50 15.75 25.59 21.46 18.11 805 MM 80 578 578 584 230 650 470 400 650 545 460 365 IN 4 26.5 26.5 26.88 10.59 29.13 20.67 17.72 31.89 27.95 18.11 1279 MM 100 673 673 683 269 740 525 450 810 710 460 580 IN 6 36 36 36.5 13.39 38.58 25.59 19.69 42.13 33.07 18.11 3175 MM 150 914 914 927 340 980 650 500 1070 840 460 1440 IN 8 40.25 40.25 40.87 16.54 - - - 53.15 41.34 18.11 5181 MM 200 1022 1022 1028 420 - - - 1350 1050 460 2350 IN 10 50 50 50.88 20.08 - - - 58.26 46.46 18.11 9039 MM 250 1270 1270 1292 510 - - - 1480 1180 460 4100 IN 12 56 56 56.88 23.23 - - - 66.14 51.18 18.11 12897 MM 300 1422 1422 1445 590 - - - 1680 1300 460 5850 20

Cv Values CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES The flow co-efficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. 300 600 900 1500 2500 2 432 378 337 337 218 3 x 2-165 203 239-2.5-682 558 558 305 3 1155 1109 1072 966 474 4 x 3-529 597 677 624 4 2176 1944 1890 1730 725 6 x 4-944 943 1231-6 5300 4577 4383 3622 2510 8 x 6 2499 3240 3588 2137-8 11054 8886 8416 6879 5227 10 x 8 5218 5036 7975 4859-10 18856 14533 14087 11283 8313 12 28980 22729 21025 16843 12282 14 30883 28837 23846 20336-16 42224 39144 33358 27548 21396 18 55740 51368 45004 - - 20 70386 64559 56871 - - 22 86869 80279 - - - 24 106835 97240 84836 - - 26 123222 114905 - - - 28 114355 135267 - - - 30 170229 157401 133706 - - 36 245362 224424 - - - Optional Thermal Relief Modifications With the expanding gate design, it is possible for Thermal Expansion to occur within the body cavity while the valve is in the closed position. A Thermal Relief system is available to allow the body cavity to relieve into the upstream side of the valve. Sample Thermal Relief Configuration 21 SCV installed Thermal Relief system on 16 Class 600 Thru Conduit Gate Valve SCV installed Thermal Relief system on 4 Class 600 Thru Conduit Gate Valves

Operating Torques Operating torques and thrusts are based on maximum differential. CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Slab Gate Expanding Gate CLASS OPERATING THRUST LBS. 2 3 4 6 8 10 12 14 16 18 20 24 OPERATING TORQUE FT. LBS. 150 1060 12 300 1219 15 600 2032 16 1500 2360 38 150 1419 17 300 3049 24 600 4064 31 900 4959 47 150 3658 28 300 6097 47 600 6612 63 900 9918 95 150 3840 44 300 6400 73 600 12800 146 900 19199 218 150 6596 97 300 10994 161 600 21987 332 900 32981 483 150 9677 155 300 16126 259 600 32251 517 900 48377 776 150 12944 208 300 21574 346 600 43152 692 900 64723 1038 150 14211 311 300 27866 456 600 54721 911 900 76920 1368 150 19466 340 300 32444 566 600 64887 1131 900 97331 1697 150 24942 478 300 41571 797 600 83142 1592 900 124713 2389 150 30418 616 300 50698 1027 600 101396 2053 900 152094 3080 150 18221 1014 300 30369 690 600 151845 3449 TRAVEL IN. MM. TURNS 2.63 67 16 4.03 102.3 20 4.88 124 19.5 7.06 179.3 25 9.25 235 28 11.38 289 34 13.31 338 40 14.88 378 45 16.63 422.4 50 19.50 495 48 22.00 559 42 28.13 715 50 CLASS OPERATING THRUST LBS. 2 3 4 6 8 10 12 14 16 18 20 24 OPERATING TORQUE FT. LBS. 150 535 4 300 1383 10 600 2766 20 1500 6915 51 150 1115 9 300 2884 25 600 5769 49 900 8653 74 150 1783 19 300 4610 49 600 9221 98 900 13831 147 150 3388 57 300 8179 101 600 16358 201 900 24538 302 150 6500 90 300 12626 176 600 25253 351 900 37879 527 150 9300 128 300 19385 349 600 38771 698 900 58156 1047 150 11100 153 300 27588 497 600 55175 994 900 82763 1490 150 14600 201 300 32355 614 600 64709 1229 900 101857 1835 150 20000 276 300 39174 1015 600 78348 2029 900 146275 4022 150 25600 399 300 48846 1265 600 97691 2530 900 173424 4084 150 30800 399 300 60201 1655 600 120401 3311 900 248075 6241 150 42600 881 300 91789 2671 600 183577 5341 TRAVEL IN. MM. TURNS 2.63 67 16 4.03 102.3 20 4.88 124 19.5 7.19 183 25 9.12 232 28 11.31 287 34 13.38 340 40 14.88 378 45 16.88 429 50 18.94 481 48 21.12 536 42 25.25 641 50 22

Standard Globe Valves Carbon & Stainless Steel Sizes 2-18 Class 150-2500 Design and Manufacturing Standards Basic Design API 600 & ANSI B 16.34 Shell Wall Thickness API 600 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 23

Carbon & Stainless Steel Globe Valves Class 150-2500 2-18 15 48 16 45 19 17 10 23 29 W CARBON & STAINLESS STEEL GLOBE VALVES L W 30 9 21 24 2 31 16 14 13 8 20 12 11 7 22 A3 5 6 4 3 1 A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 STEM A182-F60 A182-F6a A182-F60 A182-F6Q A182-F304 F316 F347 6 DISC GLAND A217-CA15 A217-CA15 A217-CA15 A217-CA15 A182-F304 F316 F347 7 BONNET BUSH A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 8 PACKING GLAND A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A360-LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439 - D2C B147-B8 F316 F347 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 13 GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 15 HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A395 14 GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A194-8 20 HINGE PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 21 PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 24 LANTERN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 29 BEARING COMMERCIAL 30 STOPPER A283-D 31 KEY STEEL 45 WASHER STEEL 48 IMPACT A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 24

CARBON & STAINLESS STEEL GLOBE VALVES CLASS 150 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 18 mm 51 64 76 102 152 203 254 305 356 406 457 in 8.0 8.5 9.5 11.5 16.0 19.5 24.5 27.5 31.0 36.0 38.5 mm 203 216 241 292 406 495 622 699 787 914 978 in mm in 8.0 8.5 9.5 11.5 16.0 19.5 24.5 27.5 31.0 36.0 38.5 mm 203 216 241 292 406 495 622 699 787 914 978 in 15.3 14.8 17.0 19.5 22.6 28.0 31.4 39.1 54.6 53.4 78.0 mm 388 376 433 495 574 710 797 W2 1387 1356 1980 in 7.9 8.8 8.8 9.8 14.0 14.0 17.7 17.7 22.0 22.0 24.0 mm 20) 224 224 250 355 355 450 450 560 560 610 in - - - - - - - - 16.3 16.3 17.0 mm - - - - - - - - 414 414 432 lb 44.1 77.2 88.2 123.5 229.3 401.3 650.5 904 1510 1985 3969.0 kg 20 35 40 56 104 182 295 410 685 903 1800 lb 33.1 66.2 70.6 90.4 183.0 330.8 496.1 728 1312 1764 3638.3 kg 15 30 32 41 83 150 225 330 595 800 1650 CLASS 300 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 10.5 11.5 12.5 14.0 17.5 22.0 24.5 28.0 33.0 34.0 mm 267 292 318 357 445 559 622 711 838 864 in 11.12 12.12 13.12 14.62 18.12 22.62 25.12 28.62 39.62 42.62 mm 283 308 333 371 460 575 638 727 1006 1083 in 10.5 11.5 12.5 14.0 17.5 22.0 24.5 28.0 33.0 34.0 mm 267 292 318 357 444 559 622 711 838 864 in 15.6 16.3 18.2 21.7 29.2 31.5 44.6 46.1 56.5 70.7 mm 396 415 462 550 741 800 1132 1172 1435 1797 in 7.9 8.8 9.8 14.0 17.7 22.0 22.0 28.0 28.0 31.5 mm 200 224 250 355 450 560 560 710 710 800 in - - - - - - 16.3 18.4 18.4 20.7 mm - - - - - - 414 468 468 526 Ib 70.6 92.6 141.0 220.5 419.0 595.4 1168.7 2240 2546.8 3748.5 Kg 32 42 64 100 190 270 530 1016 1155 1700 Ib 66.2 66.2 105.8 194.0 328.5 441 970.2 1997.7 2216 3309.7 Kg 30 30 48 88 149 200 440 906 1005 1501 25

CARBON & STAINLESS STEEL GLOBE VALVES CLASS 600 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 mrn 51 64 76 102 152 203 254 305 356 406 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 mm 292 330 356 432 559 660 787 838 889 991 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 mm 295 333 359 435 562 664 790 841 892 994 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 mm 292 330 356 432 559 660 787 838 889 991 in 16.0 19.8 19.9 22.4 29.9 51.8 59.5 69.9 70.9 76.0 mm 407 502 505 568 759 1315 1511 1775 1800 1930 in 8.8 9.8 11.0 14.0 17.7 28.0 31.5 35.4 35.4 35.4 mm 224 250 280 355 450 710 800 900 900 900 in - - - - - 18.4 20.7 26.4 26.4 26.4 mm - - - - - 468 626 670 670 670 Ib 94.8 154.4 172.0 300.0 619.6 1301 2099 3528 5953.5 7938.0 kg 43 70 78 136 281 590 952 1600 2700 3600 Ib 72.8 121.3 132.3 216.1 454.2 1125 1746 3263.4 5534.6 7386.8 kg 33 55 60 98 206 510 792 1480 2510 3350 CLASS 900 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 mrn 51 64 76 102 152 203 254 305 356 406 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 mm 368 419 381 457 610 737 838 965 1029 1130 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 mm 371 422 384 460 613 740 841 968 1038 1140 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 mm 368 419 381 457 610 737 838 965 1029 1130 in 27.4 27.3 30.5 33.7 50.7 65.6 63.0 67.1 87.0 103.1 mm 695 695 775 855 1288 1665 1600 1705 2210 2620 in 15.7 15.7 15.7 15.7 22.0 31.5 31.5 35.4 35.4 35.4 mm 400 400 400 400 560 800 800 900 900 900 in - 16.3 20.7 20.7 26.4 26.4 26.4 mm - 414 526 526 670 670 670 Ib 271.2 341.8 231.5 441 1101.5 2756.3 4520.3 5843.3 8048.3 9481.5 kg 123 155 105 200 500 1250 2050 2650 3650 4300 Ib 205.1 264.6 196.2 335.2 903.2 2425.5 4123.4 5292.0 7386.8 8600.0 kg 93 120 89 152 410 1100 1870 2400 3350 3900 26

CARBON & STAINLESS STEEL GLOBE VALVES CLASS 1500 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 mm 368 419 470 546 705 832 991 1130 1257 1384 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 mm 371 422 473 549 711 841 1000 1046 1276 1407 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 mm 368 419 470 546 705 832 991 1130 1257 1384 in 27.4 27.3 31.5 40.0 53.0 77.2 91.0 105.1 126.0 160.0 mm 695 695 799 1015 1345 1960 2310 2670 3200 4064 in 15.7 15.7 19.7 19.7 28.0 28.0 30.0 30.0 30.0 30.0 mm 400 400 500 500 710 710 760 760 760 760 in - - - - 18.4 18.4 20.2 20.2 22.3 22.3 mm - - - - 468 468 512 512 567 567 Ib 271.2 341.8 396.9 749.7 1482 4630.5 7056.0 9702.0 11907.0 14773.5 kg 123 155 180 340 672 2100 3200 4400 5400 6700 lb 205.1 264.6 297.7 621.8 1217.1 4190.0 6174.0 8379.0 10363.5 12789.0 kg 93 120 135 282 552 1900 2800 3800 4700 5800 CLASS 2500 - CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 mm 51 64 76 102 152 203 254 305 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 17.87 20.25 23.0 26.88 36.5 40.87 50.88 56.88 mm 454 514 584 683 927 1038 1292 1445 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 28.3 31.5 34.8 50.0 75.0 97.0 110.2 138.0 mm 720 800 885 1260 1905 2465 2800 3505 in 15.7 19.7 19.7 24.0 24.0 30.0 30.0 30.0 mm 400 500 500 610 610 760 760 760 in - - - 20.2 17.0 22.3 22.3 22.3 mm - - - 512 432 567 567 567 Ib 419.0 661.5 771.8 1852.2 5071.5 10584.0 14994.0 18742.5 kg 190 300 350 840 2300 4800 6800 8500 Ib 352.8 529.2 617.4 1521.5 4410.0 9702.0 13230.0 16537.5 kg 160 240 280 690 2000 4400 6000 7500 27

Pressure Seal Globe Valves Carbon & Stainless Steel Sizes 2-16 Class 600-2500 Design and Manufacturing Standards Basic Design ANSI B 16.34 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 28

Carbon & Stainless Steel Pressure Seal Globe Valves Class 600-2500 2-16 15 16 19 17 29 23 10 30 & 31 CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES W L W 9 28 26 32 22 6 14 13 8 34 21 11 28 35 33 37 2 A3 5 3 1 A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 5 STEM A182-F6Q A182-F60 A182-F60 A182-F60 A182-F304 F316 F347 6 DISC GLAND A217-CA15 A217-CA15 A217-CA15 A217-CA15 A182-F304 F316 F347 8 PACKING GLAND A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A360-LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C A147-B8 F316 F347 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 13 GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A194-8 15 HANDLE NUT STEEL 16 SET SCREW STEEL 19 HANDWHEEL A395 21 PACKING COMMERCIAL 22 GASKET COMMERCIAL 26 YOKE A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 30 STOPPER A283-D 31 STOPPER PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 32 PACKING WASHER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 33 RETAINER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 34 HINGE CLAMP A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 35 BONNET CLAMP A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 37 GASKET SPACER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 29

CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES CLASS 600 - CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 7.0 8.5 10.0 12.0 18.0 23.0 28.0 32.0 35.0 39.0 mm 178 216 254 305 457 584 711 813 889 991 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 mm 292 330 356 432 559 660 787 838 889 991 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 mm 295 333 359 435 562 665 790 841 892 994 in 21.7 24.8 26.8 29.5 453 49.2 55.1 61.0 70.9 85.0 mm 550 630 680 750 1150 1250 1400 1550 1800 2160 in 9.8 11.8 11.8 17.7 23.6 18.1 24.0 24.0 24.0 29.9 mm 250 300 300 450 600 460 610 610 610 760 in - - 20.2 17.0 20.2 20.2 22.3 mm - - 512 432 512 512 567 Ib 99.2 121.2 187.4 297.7 672.5 1367.1 2888.6 4189.5 5997.6 6945.8 kg 45 55 85 135 305 620 1310 1900 2720 3150 Ib 77.2 99.2 132.3 209.5 507.2 1190.7 2535.8 3792.6 5578.7 6394.5 kg 35 45 60 95 230 540 1150 1720 2530 2900 CLASS 900 - CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 mm 368 419 381 457 610 737 838 965 1029 1130 in 8.5 10 12 14 20 26 31 36 39 43 mm 216 254 305 356 508 660 787 914 991 1092 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 mm 371 422 384 460 613 740 841 968 1038 1140 in 24.4 25.3 28.4 33.5 48.2 53.1 61.0 68.9 78.7 90.9 mm 619 641 721 850 1225 1350 1550 1750 2000 2310 in 15.7 15.7 15.7 19.7 24.0 24.0 24.0 24.0 29.9 29.9 mm 400 400 400 500 610 610 610 610 760 760 in - - - - 20.2 17.0 20.2 20.2 22.3 22.3 mm - - - - 512 432 512 512 567 567 Ib 176.4 242.6 231.5 374.9 926.1 2205.0 3792.6 5071.5 7386.8 8820.0 kg 80 110 105 170 420 1000 1720 2300 3350 4000 Ib 121.3 176.4 176.4 286.7 793.8 1984.5 3351.6 4520.3 6725.3 7938.0 kg 55 80 80 130 360 900 1520 2050 3050 3600 30

CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES CLASS 1500 - CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 14 mm 51 64 76 102 152 203 254 305 356 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 mm 368 419 470 546 705 832 991 1130 1257 in 8.5 10 12 16 22 28 34 39 42 mm 216 254 305 406 559 711 864 991 1057 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 mm 371 422 473 549 711 842 1000 1146 1276 in 24.4 25.2 32.9 33.7 48.4 70.9 78.7 91.0 105.9 mm 619 641 835 857 1230 1800 2000 2311 2691 in 15.7 15.7 19.7 19.7 24.0 24.0 29.9 29.9 29.9 mm 400 400 500 500 610 610 760 760 760 in - - - - 20.2 20.2 20.2 20.2 22.3 mm - - - - 512 512 512 512 567 lb 176.4 242.6 299.9 496.1 1433.3 3704.4 5909.4 7497.0 9481.5 kg 80 110 136 225 650 1680 2680 3400 4300 lb 121.3 176.4 209.5 352.8 1146.6 3153.2 5027.4 6240.2 7938.0 kg 55 80 95 160 520 1430 2280 2830 3600 CLASS 2500 - CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in 2 2.5 3 4 6 8 10 12 mm 51 64 76 102 152 203 254 305 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 mm 451 508 578 673 914 1022 1270 1422 in 17.75 20.25 23 26.88 36.5 40.87 50.88 56.88 mm 451 514 584 683 927 1038 1292 1445 in 24.3 30.7 31.5 51.2 53.9 85.0 100.0 106.0 mm 616 781 800 1300 1370 2160 2540 2692 in 15.7 19.7 19.7 24.0 24.0 29.9 29.9 29.9 mm 400 500 500 610 610 760 760 760 in - - - 20.2 17.0 22.3 22.3 22.3 mm - - 512 432 567 567 567 Ib 220.5 341.8 463.1 1102.5 2756.3 5292.0 7276.5 9261.0 kg 100 155 210 500 1250 2400 3300 4200 Ib 154.4 242.6 308.7 771.8 2094.8 4410.0 5512.5 7276.5 kg 70 110 140 350 950 2000 2500 3300 31

Standard Check Valves Carbon & Stainless Steel Sizes 2-24 Class 150-2500 Design and Manufacturing Standards Basic Design ANSI B16.34 Shell Wall Thickness API 16.34 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 32

CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES Carbon & Stainless Steel Standard Check Valves Class 150-2500 2-24 5 21 24 19 11 2 12 22 A2 (RTJ) 7 A3 8 20 9 3 4 1 A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING Al 05 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 HINGE PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 8 DISC NUT AISI 304 F316 F347 9 DISC WASHER AISI 304 F316 F347 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 19 EYE BOLT A105 SS SS 20 SPLIT PIN AISI 304 F316 F347 21 PLUG GASKET COMMERCIAL 22 GASKET COMMERCIAL 24 PLUG A105 F316 F316 33

CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES CLASS 150 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 in 8.0 8.5 9.5 11.5 14.0 19.5 24.5 27.5 31.0 34.0 38.5 38.5 51.0 57.0 60.0 77.0 mm 203 216 241 292 356 495 622 699 787 864 978 978 1295 1448 1524 1956 in 5.8 6.4 6.9 8.3 11.3 13.6 16.7 19.5 23.8 25.6 27.9 29.6 38.5 40.0 45.2 53.1 mm 147 163 176 210 288 346 424 496 605 649 708 752 978 1016 1149 1349 in 8.0 8.5 9.5 11.5 14.0 19.5 24.5 27.5 31.0 34.0 38.5 38.5 51.0 57.0 60.0 77.0 mm 203 216 241 292 356 495 622 699 787 864 978 978 1295 1448 1524 1956 in mm Ib 35.2 48.5 66.1 97.0 172.0 260.2 520.4 757.8 929.7 1398 1799 2165 3925 4520.3 4643.9 7386.8 kg 16 22 30 44 78 118 236 344 422 634 816 982 1780 2050 2108 3350 Ib 26.4 33.0 46.3 57.3 136.7 200.7 449.8 645.5 775.5 1195.0 1579.0 1879.0 3528.0 4300.0 4423.6 6945.8 kg 12 15 21 26 62 91 204 293 352 542 716 852 1600 1950 2008 3150 CLASS 300 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 in 10.5 11.5 12.5 14.0 17.5 21.0 24.5 28.0 33.0 34.0 38.5 40.0 53.0 59.0 62.75 82.0 mm 267 292 318 356 445 533 622 711 838 864 978 1016 1346 1499 1594 2083 in 11.12 12.12 13.12 14.62 18.12 21.62 25.12 28.62 33.62 34.62 39.12 40.75 53.88 60.0 63.75 83.12 mm 283 308 333 371 460 549 638 111 854 880 994 1035 1368 1524 1619 2108 in 10.5 11.5 12.5 14.0 17.5 21.0 24.5 28.0 33.0 34.0 38.5 40.0 53.0 59.0 62.75 82.0 mm 267 292 318 356 445 533 622 711 838 864 978 1016 1346 1499 1594 2083 in 6.4 7.1 7.8 8.7 12.8 14.5 18.6 20.9 22.8 27.4 31.4 30.6 39.6 45.2 50.0 60.6 mm 163 180 197 220 326 368 473 530 580 695 797 776 1007 1149 1270 1540 Ib 52.9 81.5 99.1 149.8 301.8 485.1 595.4 1091.5 1498.0 2094.8 2646.0 3304.5 4851.0 6174.0 7497.0 11025.0 kg 24 37 45 68 137 220 270 495 680 950 1200 1500 2200 2800 3400 5000 Ib 46.3 77.1 77.1 112.4 242.3 401.3 463.1 1014.3 1156.6 1764.0 2138.9 2687.7 3924.9 5292.0 6504.8 9481.5 kg 21 35 35 51 110 182 210 460 525 800 970 1220 1780 2400 2950 4300 CLASS 600 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 63.0 65.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1600 1651 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 63.5 65.5 mm 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1613 1664 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 63.0 65.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1600 1651 in 8.0 8.6 10.0 12.5 15.6 20.8 24.6 23.8 26.1 32.0 37.8 40.5 47.3 53.1 56.3 mm 202 219 253 318 397 529 625 604 664 812 960 1029 1202 1349 1429 Ib 88.2 121.2 158.6 253.6 550.8 926.1 1349 1786.1 2425.5 3638 3969.0 6168.4 7197 9040.5 11025.0 kg 40 55 72 115 250 420 612 810 1100 1650 1800 2800 3264 4100 5000 Ib 68.4 99.1 132.2 176.4 451.6 804.6 1085 1576.6 1940.4 2955 3197.3 5177.1 5654 7717.5 9481.5 kg 31 45 60 80 205 365 492 715 880 1340 1450 2350 2564 3500 4300 34

CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES CLASS 900 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 69.0 73.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 1753 1854 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 69.9 73.9 mm 371 422 384 460 613 740 841 968 1038 1140 1232 1333 1568 1775 1876 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 69.0 73.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 1753 1854 in 13.1 13.7 12.6 16.7 18.9 22.2 28.3 30.7 31.8 33.0 36.3 41.4 47.2 55.1 61.8 mm 333 349 321 423 479 565 721 781 807 838 921 1051 1200 1400 1569 Ib 154.4 242.6 242.6 471.4 837.9 1374.7 2535.8 3197.3 3858.8 5336.1 7166.3 8820.0 12789.0 17309.3 19955.3 kg 70 110 110 214 380 624 1150 1450 1750 2420 3250 4000 5800 7800 9050 Ib 110.3 191.8 187.4 383.3 661.5 1088.3 2094.8 2602,0 3197.3 4520.3 5953.5 7275.1 9922.5 14663.3 16868.3 kg 50 87 85 174 300 494 950 1180 1450 2050 2700 3300 4500 6650 7650 CLASS 1500 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 14.5 16.5 18.5 21.5 27.8 32.8 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 706 833 991 1130 1257 1383 1537 1664 1943 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.62 mm 371 422 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 in 14.5 16.5 18.5 21.5 27.8 32.8 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 706 833 991 1130 1257 1383 1537 1664 1943 in 13.1 13.7 15.3 16.5 23.1 26.8 29.8 39.7 40.8 42.0 47.1 51.1 57.1 mm 333 349 389 419 587 680 756 1008 1035 1067 1197 1299 1451 Ib 154.4 242.6 374.9 661.5 1531.1 2624.0 4079.3 7336 7938.0 10804.5 14553.0 17970.8 25908.8 kg 70 110 170 300 695 1190 1850 3330 3600 4900 6600 8150 11750 Ib 110.3 191.8 297.7 540.2 1233.7 2127.8 3263.4 6080.3 6251.2 8599.5 11576.3 14222.3 19845.0 kg 50 87 135 245 560 965 1480 2760 2835 3900 5250 6450 9000 CLASS 2500 - CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 62.0 68.0 mm 451 508 578 673 914 1022 1270 1422 - - in 17.87 20.25 23.0 26.88 36.5 40.87 50.88 56.88 - - mm 454 514 584 683 927 1038 1292 1445 - - in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 62.0 68.0 mm 451 508 578 673 914 1022 1270 1422 - - in 16.4 16.5 17.4 18.9 20.1 28.0 33.5 39.4 47.2 51.1 mm 416 419 441 479 511 711 851 1000 1200 1299 Ib 330.8 529.2 771.8 1433.3 3197.3 5622.8 8709.8 12568.5 - - kg 150 240 350 650 1450 2550 3950 5700 - - Ib 264.6 430.0 617.4 1190.7 2646.0 4851.0 6945.8 10032.8 13671.0 17860.5 kg 120 195 280 540 1200 2200 3150 4550 6200 8100 35

Full Port Check Valves Carbon & Stainless Steel Sizes 2-24 Class 150-2500 Design and Manufacturing Standards Basic Design API 6D & ANSI B16.34 Shell Wall Thickness API 6D Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 36

Carbon & Stainless Steel Full Port Check Valves Class 150-2500 2-24 CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES 12 11 10 9 8 13 7 A1 6 5 4 3 2 1 A2 (RTJ) 14 15 A3 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BODY SEAT RING Al 05 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 DISC WASHER AISI 304 F316 F347 5 DISC NUT AISI 304 F316 F347 6 DISC PIN AISI 304 F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 8 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 9 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 10 BONNET GASKET COMMERCIAL 11 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 12 EYE BOLT A105 SS SS 13 HINGE PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 14 GASKET COMMERCIAL 15 PLUG A105 F316 F316 37

CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES CLASS 150 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 in 8.0 8.5 9.5 11.5 14.0 19.5 24.5 27.5 31.0 34.0 38.5 38.5 51.0 57.0 60.0 77.0 mm 203 216 241 292 356 495 622 698 787 864 978 978 1295 1448 1524 1956 in 8.0 8.5 9.5 11.5 14.0 19.5 24.5 27.5 31.0 34.0 38.5 38.5 51.0 57.0 60.0 77.0 mm 203 216 241 292 356 495 622 698 787 864 978 978 1295 1448 1524 1956 in 5.8 6.4 6.9 8.3 11.3 13.6 16.7 19.5 23.8 25.6 27.9 29.6 38.5 40.0 45.2 53.1 mm 147 163 176 210 288 346 424 496 605 649 708 752 978 1016 1149 1349 Ib 35.2 48.5 66.1 97.0 172.0 260.2 520.4 757.8 929.7 1398 1799 2165 3925 4520.3 4643.9 7386.8 kg 16 22 30 44 78 118 236 344 422 634 816 982 1780 2050 2108 3350 Ib 26.4 33.0 46.3 57.3 136.7 200.7 449.8 645.5 775.5 1195.0 1579.0 1879.0 3528.0 4300.0 4423.6 6945.8 kg 12 15 21 26 62 91 204 293 352 542 716 852 1600 1950 2008 3150 CLASS 300 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 36 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 914 in 10.5 11.5 12.5 14.0 17.5 21.0 24.5 28.0 33.0 34.0 38.5 40.0 53.0 59.0 62.75 82.0 mm 267 292 318 356 444 553 622 711 838 864 978 1016 1346 1499 1594 2083 in 11.12 12.12 13.12 14.62 18.12 21.62 25.12 28.62 33.62 34.62 39.12 40.75 53.88 60.0 63.75 83.12 mm 283 308 333 371 460 549 638 111 854 880 994 1035 1368 1524 1619 2108 in 10.5 11.5 12.5 14.0 17.5 21.0 24.5 28.0 33.0 34.0 38.5 40.0 53.0 59.0 62.75 82.0 mm 267 292 318 356 444 553 622 711 838 864 978 1016 1346 1499 1594 2083 in 6.4 7.1 7.8 8.7 12.8 14.5 18.6 20.9 22.8 27.4 31.4 30.6 39.6 45.2 50.0 60.6 mm 163 180 197 220 326 368 473 530 580 695 797 776 1007 1149 1270 1540 Ib 52.9 81.5 99.1 149.8 301.8 485.1 595.4 1091.5 1498.0 2094.8 2646.0 3304.5 4851.0 6174.0 7497.0 11025.0 kg 24 37 45 68 137 220 270 495 680 950 1200 1500 2200 2800 3400 5000 Ib 46.3 77.1 77.1 112.4 242.3 401.3 463.1 1014.3 1156.6 1764.0 2138.9 2687.7 3924.9 5292.0 6504.8 9481.5 kg 21 35 35 51 110 182 210 460 525 800 970 1220 1780 2400 2950 4300 CLASS 600 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 63.0 65.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1600 1651 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 63.5 65.5 mm 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1613 1664 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 63.0 65.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1600 1651 in 8.0 8.6 10.0 12.5 15.6 20.8 24.6 23.8 26.1 32.0 37.8 40.5 47.3 53.1 56.3 mm 202 219 253 318 397 529 625 604 664 812 960 1029 1202 1349 1429 Ib 88.2 121.2 158.6 253.6 550.8 926.1 1349 1786.1 2425.5 3638 3969.0 6168.4 7197 9040.5 11025.0 kg 40 55 72 115 250 420 612 810 1100 1650 1800 2800 3264 4100 5000 Ib 68.4 99.1 132.2 176.4 451.6 804.6 1085 1576.6 1940.4 2955 3197.3 5177.1 5654 7717.5 9481.5 kg 31 45 60 80 205 365 492 715 880 1340 1450 2350 2564 3500 4300 38

CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES CLASS 900 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 30 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 711 762 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 69.0 73.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 1753 1854 in 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 69.9 73.9 mm 371 422 384 460 613 740 841 968 1038 1140 1232 1333 1568 1775 1876 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 69.0 73.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 1753 1854 in 13.1 13.7 12.6 16.7 18.9 22.2 28.3 30.7 31.8 33.0 36.3 41.4 47.2 55.1 61.8 mm 333 349 321 423 479 565 721 781 807 838 921 1051 1200 1400 1569 Ib 154.4 242.6 242.6 471.4 837.9 1374.7 2535.8 3197.3 3858.8 5336.1 7166.3 8820.0 12789.0 17309.3 19955.3 kg 70 110 110 214 380 624 1150 1450 1750 2420 3250 4000 5800 7800 9050 Ib 110.3 191.8 187.4 383.3 661.5 1088.3 2094.8 2602,0 3197.3 4520.3 5953.5 7275.1 9922.5 14663.3 16868.3 kg 50 87 85 174 300 494 950 1180 1450 2050 2700 3300 4500 6650 7650 CLASS 1500 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 705 832 991 1130 1257 1383 1537 1664 1943 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.62 mm 371 422 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 705 832 991 1130 1257 1383 1537 1664 1943 in 13.1 13.7 15.3 16.5 23.1 26.8 29.8 39.7 40.8 42.0 47.1 51.1 57.1 mm 333 349 389 419 587 680 756 1008 1035 1067 1197 1299 1451 Ib 154.4 242.6 374.9 661.5 1531.1 2624.0 4079.3 7336 7938.0 10804.5 14553.0 17970.8 25908.8 kg 70 110 170 300 695 1190 1850 3330 3600 4900 6600 8150 11750 Ib 110.3 191.8 297.7 540.2 1233.7 2127.8 3263.4 6080.3 6251.2 8599.5 11576.3 14222.3 19845.0 kg 50 87 135 245 560 965 1480 2760 2835 3900 5250 6450 9000 CLASS 2500 - CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 mm 51 64 76 102 152 203 254 305 356 406 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 62.0 68.0 mm 451 508 578 673 914 1022 1270 1422 - - in 17.87 20.25 23.0 26.88 36.5 40.87 50.88 56.88 - - mm 454 514 584 683 927 1038 1292 1445 - - in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 62.0 68.0 mm 451 508 578 673 914 1022 1270 1422 - - in 16.4 16.5 17.4 18.9 20.1 28.0 33.5 39.4 47.2 51.1 mm 416 419 441 479 511 711 851 1000 1200 1299 Ib 330.8 529.2 771.8 1433.3 3197.3 5622.8 8709.8 12568.5 - - kg 150 240 350 650 1450 2550 3950 5700 - - Ib 264.6 430.0 617.4 1190.7 2646.0 4851.0 6945.8 10032.8 13671.0 17860.5 kg 120 195 280 540 1200 2200 3150 4550 6200 8100 39

Pressure Seal Swing & Tilting Disc Check Valves Carbon & Stainless Steel Sizes 2-24 Class 600-2500 Design and Manufacturing Standards Basic Design ANSI B 16.34 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 40

Cast & Stainless Pressure Seal Swing Check Valves Class 600-2500 2-24 CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES 5 21 25 19 36 22 11 12 33 37 2 A2 (RTJ) A3 4 3 7 8 9 1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC B/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5Q A182-F304 F316 F347 5 HINGE PIN A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 8 SET BOLT AISI 304 A193-B8 A193-B8 9 DISC COVER AISI 304 CF8M CF8C 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A194-8 19 EYE BOLT A105 SS SS 21 PLUG GASKET COMMERCIAL 22 GASKET COMMERCIAL 25 PLUG A194-2H A194-2H A194-2H A194-2H A194-4 F316 F316 33 RETAINER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 36 BONNET CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 37 GASKET SPACER A276-410 A276-410 A276-410 A276-410 A276-304 F316 F347 A1 41

CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES CLASS 600 - CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 7.0 8.5 10.0 12.0 18.0 23.0 28.0 32.0 35.0 39.0 43.0 47.0 55.0 mm 178 216 254 305 457 584 711 813 889 991 1092 1194 1397 in 11.5 13.0 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 in 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 mm 295 333 359 435 562 663 790 841 892 994 1095 1200 1407 in 9.5 10.4 10.6 12.5 15.7 23.1 23.9 27.4 29.5 28.7 28.7 32.2 37.4 mm 241 264 270 318 400 587 606 695 749 730 730 819 949 Ib 59.5 77.2 99.2 187.4 419.0 771.8 1102.5 1477.4 1940.4 2535.8 3263.4 4145.4 5733.0 kg 27 35 45 85 190 350 500 670 880 1150 1480 1880 2600 lb 39.7 55.1 70.6 121.3 286.7 573.3 815.9 1080.5 1455.3 1874.3 2425.5 3285.5 4498.2 kg 18 25 32 55 130 260 370 490 660 850 1100 1490 2040 CLASS 900 - CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 8.5 10.0 12.0 14.0 20.0 26.0 31.0 36.0 39.0 43.0 46.5 50.5 59.5 mm 216 254 305 356 508 660 787 914 991 1092 1181 1283 1511 in 14.5 16.5 15.0 18.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0 52.0 61.0 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 in 14.62 16.62 15.12 18.12 24.13 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 mm 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 in 9.5 10.4 10.6 12.5 15.7 23.1 23.9 27.4 29.5 28.7 33.5 33.3 37.8 mm 241 264 270 318 400 587 606 695 749 730 851 864 959 1b 88.2 121.3 114.7 231.5 507.2 1256.9 1874.3 2866.5 3417.8 3638.3 5071.5 6615.0 9040.5 kg 40 55 52 105 230 570 850 1300 1550 1650 2300 3000 4100 Ib 44.1 70.6 66.2 143.3 352.8 970.2 1521.5 2249.1 2690.1 2976.8 4079.3 5292.0 6394.5 kg 20 32 30 65 160 440 690 1020 1220 1350 1850 2400 2900 42

CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES CLASS 1500 - CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 8.5 10.0 12.0 16.0 22.0 28.0 34.0 39.0 42.0 47.0 53.0 58.0 64.0 mm 216 254 305 406 559 711 864 991 1067 1194 1346 1473 1626 in 14.5 16.5 18.5 21.5 27.75 32.75 39.0 44.5 49.5 54.5 60.5 65.5 76.5 mm 368 419 470 546 705 832 991 1130 1257 1384 1537 1664 1943 in 14.62 16.62 18.62 21.62 28.0 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.62 mm 371 422 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 in 9.5 10.4 10.6 12.5 15.7 18.9 23.3 25.4 28.0 29.5 34.6 37.4 43.3 mm 241 264 270 318 400 479 591 645 711 749 880 949 1099 Ib 88.2 121.3 220.5 308.7 882.0 1345.1 2315.3 3417.8 4630.5 5733.0 7276.5 9261.0 13230.0 kg 40 55 100 140 400 610 1050 1550 2100 2600 3300 4200 6000 Ib 44.1 70.6 88.2 154.4 617.4 1058.4 1631.7 2425.5 3109.1 3528.0 4630.5 3733.0 7717.5 kg 20 32 40 70 280 480 740 1100 1410 1600 2100 2600 3500 CLASS 2500 - CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in 2 2.5 3 4 6 8 10 12 14 16 18 mm 51 64 76 102 152 203 254 305 356 406 457 in 11.0 13.0 14.5 18.0 24.0 30.0 36.0 41.0 44.0 49.0 55.0 mm 279 330 368 457 610 762 914 1041 1118 1245 1397 in 17.75 20.0 22.75 26.5 36.0 40.25 50.0 56.0 62.0 68.0 - mm 451 508 578 673 914 1022 1270 1422 1575 1727 - in 17.87 20.25 23.0 26.88 36.5 40.87 50.88 56.88 - - - mm 454 514 584 683 927 1038 1292 1445 - - - in 9.6 10.4 10.6 12.5 15.7 22.0 24.8 27.5 33.9 35.4 39.4 mm 245 264 270 318 400 559 629 699 860 899 1000 Ib 187.4 260.2 341.8 628.4 1653.8 2976.8 4740.8 6615.0 9216.9 11157.3 16493.4 kg 85 118 155 285 750 1350 2150 3000 4180 5060 7480 Ib 110.3 154.4 187.4 363.8 1014.3 1984.5 2866.5 3969.0 5402.3 7056.0 8930.3 kg 50 70 85 165 460 900 1300 1800 2450 3200 4050 43

Piston Check Valves Cast Steel Sizes 1-24 Class 300-2500 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness ANSI B16.34 Face to Face Dimension As stated Flange End Dimension ANSI B16.5 Inspection & Testing API 6D 44

Cast Steel Piston Check Valves Class 300-2500 1-24 CAST STEEL PISTON CHECK VALVES 16 9 10 11 12 17 2 14 8 7 5 6 15 3 4 13 1 H1 A2 (RTJ) A1 45

Bill of material CAST STEEL PISTON CHECK VALVES NO NAME OF PART MATERIAL 1 BODY CAST CARBON STEEL, ASTM A-216 WCB CAST ALLOY STEEL, ASTM A-487-N 2 COVER FORGED STEEL, ASTM A-105-GR. 1 FORGED STEEL, ASTM A-105-GR. 2 3 PISTON 11-13% CHROME ALLOY (165 BRINELL HARDNESS) 4 SEAT 11-13% CHROME ALLOY (250 BRINELL HARDNESS) 5 LINER ALLOY IRON (HARD CHROME LINED) 6 PISTON RINGS CAST IRON (CHEMICALLY TREATED) *7 CHECK VALVE (with ball) STAINLESS STEEL WITH CHROME-STEEL BALL *8 ORIFICE PLUG.25 STAINLESS STEEL 9 STUDS ASTM A-193-GR 87 10 HEX NUTS ASTM A-194-GR 2 11 BODY - COVER - LINER GASKET GRAPHITE ASBESTOS *12 BLEEDER PLUG.25 NPT STEEL (CHEMICALLY TREATED) 13 DRAIN PLUG.25 NPT STEEL 14 API RING GASKET SOFT IRON 15 SEAT LOCKING PIN STAINLESS STEEL 16 IDENTIFICATION PLATE CAST ALUMINUM *17 LIFTING EYE BOLTS STEEL * Indicates parts interchangeable in all sizes. Note: Available in other materials upon request. 46

CAST STEEL PISTON CHECK VALVES CLASS 300 - CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in 1 1.5 2 3 4 6 8 10 12 14 16 mm 25 38 51 76 102 152 203 254 305 356 406 in 7.5 11.25 10.25 14.75 17.625 19.375 22.5 29.625 32 35.25 39.125 mm 191 286 260 375 448 492 572 752 813 895 994 in - - - - - - - - - - - mm - - - - - - - - - - - in 2.25 3.25 3.25 4.875 5 6.75 9.25 11.75 13.25 14.875 17 mm 57 83 83 124 127 171 235 298 337 378 432 in 5.875 8.5 8.5 10.25 12.5 17.5 20.125 23.75 24.375 27.25 30.125 mm 149 216 216 260 318 445 511 603 619 692 765 lb 45 78 80 155 250 415 750 1300 1660 2500 3100 kg 20 35 36 70 114 187 341 591 755 1136 1409 CLASS 600 - CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24 mm 25 38 51 76 102 152 203 254 305 356 406 457 508 559 in 8 11.25 11 14.75 18.5 20.75 24 30.875 33.625 37 41.25 46 55.5 60 mm 203 286 279 375 470 527 610 784 854 940 1048 1168 1410 1524 in 8.125 11.25 11.375 14.875 18.625 20.875 24.125 30.875 33.75 37.125 41.375 46.125 55.75 60.125 mm 206 286 283 378 461 530 613 787 857 943 1051 1172 1413 1527 in 2.5 3.25 3.25 5.25 5.375 7 9.25 11.75 13.125 14.875 17 19.25 20.875 22.125 mm 64 83 83 133 137 178 235 298 333 378 432 489 530 561 in 5.875 8.5 8.5 10.25 12.125 18 20.25 24.25 25.125 28.125 31.25 32.875 35.25 38.78 mm 149 216 216 260 308 457 514 616 638 714 794 835 895 985 lb 50 80 85 175 290 550 810 1650 2450 2900 3700 4600 7900 10200 kg 23 36 39 80 132 250 368 750 1114 1318 1682 2091 3591 4636 CLASS 900 - CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in 1 1.5 2 3 4 6 8 10 12 mm 25 38 51 76 102 152 203 254 305 in 11.25 13.625 13.625 14.875 19.375 21.875 24.875 31.375 33.875 mm 203 346 346 378 492 556 632 797 860 in 11.375 13.75 13.75 15 19.5 22 25 31.5 33.125 mm 289 349 349 381 495 559 635 800 857 in 2.5 3.25 3.25 5.25 5.375 7 9.25 11.75 13.125 mm 64 83 83 133 137 178 235 298 333 in 5.875 8.5 8.5 10.25 12.125 18 20.25 24.25 25.125 mm 149 216 216 260 308 457 514 616 638 lb 50 80 85 175 290 550 810 1650 2450 kg 23 36 39 80 132 250 368 750 1114 47

CAST STEEL PISTON CHECK VALVES CLASS 1500 - CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in 1 1.5 2 3 4 6 8 10 12 14 mm 25 38 51 76 102 152 203 254 305 356 in 11.25 13.625 13.625 17.25 20.25 24 32.375 34.375 41 50.5 mm 286 346 346 438 514 610 822 873 1041 1283 in 11.25 13.75 13.75 17.325 20.375 24.25 32.75 35 41.675 51.25 mm 286 349 349 440 518 616 832 889 1059 1302 in 2.5 3.25 3.25 5.25 5.375 7 9.25 11.75 13.125 14.875 mm 64 83 83 133 137 178 235 298 333 378 in 5.875 8.5 8.5 10.25 12.125 18 20.25 24.25 25.125 28.125 mm 149 216 216 260 308 457 514 616 638 714 lb 50 80 85 175 290 550 810 1650 2450 2900 kg 23 36 39 80 132 250 368 750 1114 1318 CLASS 2500 - CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in 1 1.5 2 3 4 6 8 10 mm 25 38 51 76 102 152 203 254 in 12.25 14.875 14.875 20.25 23.125 32 37.375 40.375 mm 311 378 378 512 587 813 949 1026 in 12.25 15 15 20.5 23.5 32.5 38 41.25 mm 311 381 381 521 597 826 965 1022 in 2.5 3.25 3.25 5.25 5.375 7 9.25 11.75 mm 64 83 83 133 137 178 235 298 in 5.875 8.5 8.5 10.25 12.125 18 20.25 24.25 mm 149 216 216 260 308 457 514 616 lb 50 80 85 175 290 550 810 1650 kg 23 36 39 80 132 250 368 750 48

Dual Plate Check Valves - Wafer & Flanged Carbon & Stainless Steel Wafer Sizes 1.5-84 Class 150 thru 2500 Flanged Sizes 8-48 Class 150-900 Design and Manufacturing Standards Basic Design API 6D & API 594 Face to Face Dimension API 6D & ANSI B16.10 Flange End Dimension ANSI B16.5 Inspection & Testing API 598 49

Wafer - Dual Plate Check Valves Class 150-2500 1.5-84 E 1 C 5 WAFER - DUAL PLATE CHECK VALVES 6 3 2 A 4 B Bill of material NO NAME OF PART MATERIAL 1 BODY A216-WCB A351-CF8M 2 DISC A217-CA15 A351-CF8M 3 SPRING INCONEL X750 INCONEL X750 4 SEAT 410 SS STELLITE 6 5 HINGE PIN 410 SS 316 SS 6 STOP 410 SS 316 SS DIMENSIONS & WEIGHTS VALVE 1.5 (38 mm) 2 (51 mm) 2.5 (64 mm) 3 (76 mm) 4 (102 mm) PRESSURE RATING END FACING A B C E STUD SELECTION APPROX WT NO DIA LENGTH LB KG 150 RF 2.00 3.38-1.97 4 0.5 5 4 1.8 300 RF/RJ-20 2.00 3.75-1.97 4 0.75 6.5 4 1.8 600 RF/RJ-20 2.00 3.75 1.97 4 0.75 6.5 4 1.8 150 RF 2.38 4.13-2.25 4 0.625 6 7 3.2 300 RF/RJ-23 2.38 4.38-2.25 8 0.625 6.875 8 3.2 600 RF/RJ-23 2.38 4.38-2.25 8 0.625 6.875 8 3.2 900 RF/RJ-24 2.75 5.63-2.25 8 0.875 8.75 18 8.2 1500 RF/RJ-24 2.75 5.63-2.25 8 0.875 8.75 18 8.2 2500 RF/RJ-26 2.75 5.75 2.25 8 1 10 29 13.1 150 RF 2.63 4.88-2.94 4 0.625 6.375 11 5 300 RF 2.63 5.13 2.94 8 0.75 6.875 13 5 150 RF 2.88 5.38 2 3.42 4 0.625 7 14 6.4 300 RF 2.88 5.88 2 3.42 8 0.75 8.125 17 7.7 600 RF 2.88 5.88 2 3.42 8 0.75 8.125 17 7.7 900 RF/RJ-31 3.25 6.63 2.375 3.42 8 0.875 9.5 26 11.8 1500 RF/RJ-35 3.25 6.88 2.375 3.42 8 1.125 10.5 28 12.7 2500 RF/RJ-32 3.38 7.75 2.375 3.42 8 1.25 12.25 35 15.9 150 RF 2.88 6.88 3.5 4.45 8 0.625 7 21 9.5 300 RF 2.88 7.13 3.5 4.45 8 0.75 8.125 23 10.5 600 RF/RJ-37 3.13 7.63 3.5 4.45 8 0.875 9.5 28 12.7 900 RF/RJ-37 4.00 8.13 3.25 4.45 8 1.125 11 42 19.1 1500 RF/RJ-39 4.00 8.25 3.25 4.45 8 1.25 12 45 20.5 2500 RF/RJ-38 4.13 9.25 3.25 4.45 8 1.5 14.625 64 29.1 50

WAFER - DUAL PLATE CHECK VALVES VALVE 5 (127 mm) 6 (152 mm) 8 (203 mm) 10 (254 mm) 12 (305 mm) 14 (356 mm) 16 (406 mm) 18 (457 mm) 20 (508 mm) 24 (610 mm) PRESSURE END STUD SELECTION APPROX WT A B C E RATING FACING NO DIA LENGTH LB KG 150 RF 3.38 7.75 0 5.875 8 0.75 7.375 28 12.7 300 RF 3.38 8.50 0 5.875 8 0.75 8.125 31 14.1 150 RF 3.88 8.75 5.5 6.52 8 0.75 8.25 36 16 300 RF 3.88 9.88 5.5 6.52 12 0.75 9.625 45 20 600 RF/RJ-45 5.38 10.50 3.5 6.52 12 1 12.375 80 36 900 RF/RJ-45 6.25 11.38 3.5 6.52 12 1.125 14 119 54 1500 RF/RJ-46 6.25 11.13 3.5 6.52 12 1.375 16.75 116 52 2500 RF/RJ-47 6.25 12.50 3.5 6.52 8 2 20.5 154 70 150 RF 5.00 11.00 6.75 8.13 8 0.75 9.75 80 36 300 RF 5.00 12.13 6.75 8.13 12 0.875 11.125 88 40 600 RF/RJ-49 6.50 12.63 6.625 8.13 12 1.125 14.5 160 72 900 RF/RJ-49 8.13 14.13 5.125 8.13 12 1.375 17.125 271 122 1500 RF/RJ-50 8.13 13.88 5.125 8.13 12 1.625 20.25 257 116 2500 RF/RJ-51 8.13 15.25 5.625 8.13 12 2 24 293 132 150 RF 5.75 13.38 9.25 10.25 12 0.875 11 116 52 300 RF 5.75 14.25 9.25 10.25 16 1 12.75 124 56 600 RF/RJ-53 8.38 15.75 7.875 10.25 16 1.25 17.125 260 118 900 RF/RJ-53 9.50 17.13 7.688 10.25 16 1.375 19 434 196 1500 RF/RJ-54 9.75 17.13 7.25 10.25 12 1.875 23.5 449 203 2500 RF/RJ-55 10.00 18.75 7.5 10.25 12 2.5 30.5 480 217 150 RF 7.13 16.13 10.25 11.82 12 0.875 12.25 215 97 300 RF 7.13 16.63 10.25 11.82 16 1.125 14.625 217 98 600 RF/RJ-57 9.00 18.00 9.125 11.82 20 1.25 18 360 164 900 RF/RJ-57 11.50 19.625 8.125 11.82 20 1.375 21.75 644 293 1500 RF/RJ-58 12.00 20.50 8.25 11.82 16 2 27.5 824 373 2500 RF/RJ-60 12.00 21.63 8.875 11.82 12 2.75 34.5 870 394 150 RF 7.25 17.75 11.25 13.34 12 1 13 270 123 300 RF 8.75 19.13 11.25 13.34 20 1.125 16.5 390 176 600 RF/RJ-61 10.75 19.38 9.125 13.34 20 1.375 20.25 410 186 900 RJ/RJ-62 14.00 20.50-13.34 20 1.5 25.5 872 396 1500 RF/RJ-63 14.00 22.75 13.34 16 2.25 31.5 1068 484 150 RF 7.50 20.25 13.063 15.25 16 1 13.5 295 133 300 RF 9.13 21.25 13 15.25 20 1.25 17.375 458 207 600 RF/RJ-65 12.00 22.25 13 15.25 20 1.5 22.25 728 331 900 RF/RJ-66 15.13 22.63 6.375 15.25 20 1.625 27.125 1174 532 1500 RF/RJ-67 15.125 25.25 6.375 15.25 16 2.5 34.25 1295 587 150 RF 8.00 21.63 15.563 17.25 16 1.125 14.5 312 141 300 RF 10.38 23.50 15.375 17.25 24 1.25 18.875 650 294 600 RF/RJ-69 14.25 24.13 13 17.25 20 1.625 25.25 870 394 900 RF/RJ-70 17.75 25.13 9.625 17.25 20 1.875 34.5 1344 611 1500 RF/RJ-71 18.44 27.75 7.25 17.25 16 2.75 39.75 1745 791 150 RF 8.63 23.88 17.25 19.19 20 1.125 15.125 472 215 300 RF 11.50 25.75 17.25 19.19 24 1.25 20.5 801 363 600 RF/RJ-73 14.50 26.88 17 19.19 24 1.625 26.25 1196 544 900 RF/RJ-74 17.75 27.50 16 19.19 20 2 32.5 1406 637 1500 RF/RJ-75 21.00 29.75 8.25 19.19 16 3 44.25 2812 1275 150 RF 8.75 28.25 21.125 22.78 20 1.25 16.25 788 358 300 RF 12.50 30.50 20.625 22.78 24 1.5 22.75 1150 521 600 RF/RJ-77 17.25 31.13 20.063 22.78 24 1.875 30.75 1802 819 900 RF/RJ-78 19.50 33.00 17.5 22.78 20 2.5 38 2713 1230 1500 RF/RJ-79 22.00 35.50 15.375 22.78 16 3.5 48.5 5968 2713 51

WAFER - DUAL PLATE CHECK VALVES VALVE 26 (660 mm) 28 (711 mm) 30 (762 mm) 32 (813 mm) 36 (914 mm) 40 (1016 mm) 42 (1067 mm) 48 (1219 mm) 54 (1372 mm) 60 (1524 mm) 66 (1676 mm) 72 (1829 mm) 78 (1981 mm) 84 (2134 mm) PRESSURE END STUD SELECTION APPROX WT A B C E RATING FACING NO DIA LENGTH LB KG 150 RF 14.00 30.50 23.5 24.78 24 1.25 23.125 1056 680 300 RF 14.00 32.88 23.5 24.78 28 1.625 24.75 1619 735 600 RF/RJ-73 18.00 34.13 22.75 24.78 28 1.875 31.5 1855 842 900 RF/RJ-100 21.00 34.75 22 24.78 20 2.75 38.75 2605 1182 150 RF 15.00 32.75 25.5 26.78 28 1.25 24.375 1196 544 300 RF 15.00 35.38 25.5 26.78 28 1.625 26.25 1612 733 600 RF/RJ-94 19.00 36.00 24.75 26.78 28 2 33 1916 871 900 RF/RJ-101 22.50 37.25 24 26.78 20 3 41 3170 1441 150 RF 12.00 34.75 25.25 28.93 28 1.25 21 1456 662 300 RF 14.50 37.50 25.25 28.93 28 1.75 26.5 2100 952 600 RF/RJ-95 19.88 38.25 23 28.93 28 2 34.125 3472 1578 900 RF/RJ-102 25.00 39.75 23 28.93 20 3 44 4024 182 150 RF 14.00 37.00 25.25 30.87 28 1.5 24.625 1556 707 300 RF 16.00 39.63 25.25 30.87 28 1.875 28.75 3597 1635 600 RF/RJ-96 21.00 40.25 24 30.87 28 2.25 36 3835 1743 900 RF/RJ-105 26.00 42.25 24 30.87 20 3.25 46.25 4475 2034 150 RF 14.50 41.25 25.5 34.04 32 1.5 25.875 1505 682 300 RF 19.00 44.00 25.5 34.04 32 2 32.5 2799 1269 600 RF/RJ-98 25.00 44.50 20.75 34.04 28 2.5 45 4664 2120 900 RF/RJ-105 28.25 47.25 14 34.04 20 3.5 50.75 7183 3259 150 RF 17.00 45.75 34.75 38.87 36 1.5 27.375 1980 900 300 RF 21.50 43.88 29.5 35.78 32 1.625 35 4015 1825 600 RF 26.00 45.50 29.25 35.78 32 2.25 44.25 8250 3750 900 RF 30.00 49.25 29 35.78 24 3.5 53.75 8738 3972 150 RF 17.00 48.00 36.813 41.81 36 1.5 28.875 2500 1134 300 RF 22.38 45.88 32.938 39.98 32 1.625 37 5800 2630 600 RF 27.63 48.00 25.5 38.26 28 2.5 47.125 6897 3135 900 RF 31.00 51.25 23 38.26 24 3.5 59.25 8074 3670 150 RF 20.63 54.50 40.813 46.98 44 1.5 33.375 6616 3007 300 RF 24.75 52.13 38 44.73 32 1.875 40.5 8600 3909 600 RF 31.00 54.75 35 44.73 32 2.75 54 9715 4416 150 RF 23.25 61.00 43 50.45 44 1.75 38.25 7097 3225 300 RF 28.25 58.75 43 50.45 28 2.25 47.25 8532 3878 150 RF 26.00 67.50 47.5 55.97 52 1.75 42 9126 4148 300 RF 33.00 64.75 47.5 55.97 32 2.25 53 11863 5392 150 RF 31.00 74.25 56.5 65.46 52 1.75 45 16800 7636 150 RF 33.50 80.75 60.25 71.58 60 1.75 48 18900 8590 150 RF 36.50 87 65.5 77.716 64 2 52 22522 10237 150 RF 41.00 93.5 69 95.5 64 2 57 28111 12777 52

Flanged - Dual Plate Check Valves Class 150-900 8-48 FLANGED - DUAL PLATE CHECK VALVES 1 5 E C 6 3 2 A 4 B Bill of material NO NAME OF PART MATERIAL 1 BODY A216-WCB A351-CF8M 2 DISC A217-CA15 A351-CF8M 3 SPRING INCONEL X750 INCONEL X750 4 SEAT 410 SS STELLITE 6 5 HINGE PIN 410 SS 316 SS 6 STOP 410 SS 316 SS DIMENSIONS & WEIGHTS VALVE 8 (203 mm) 10 (254 mm) 12 (305 mm) 14 (356 mm) 16 (406 mm) 18 (457 mm) PRESSURE RATING A B C E STUD SELECTION APPROX WEIGHT NO. DIAMETER LENGTH LB KG 150 5 13.5 6.75 8.13 8 0.75 5 109 49 150 5.75 16 9.25 10.25 12 0.875 5.125 182 82 600 8.375 20 7.875 10.25 16 1.25 8.75 404 183 900 9.5 21.5 7.688 10.25 16 1.375 9.5 448 203 150 7.125 19 10.25 11.82 12 0.875 5.5 276 125 300 7.125 20.5 10.25 11.82 16 1.125 7.5 338 153 600 9 22 9.125 11.82 20 1.25 9 527 239 900 11.5 24 8.125 11.82 20 1.375 10.25 767 347 150 7.25 21 11.25 3.34 12 1 6 318 144 300 8.75 23 11.25 13.34 20 1.125 7.75 456 207 600 10.75 23.75 9.125 13.34 20 1.375 9.5 835 378 900 14 25.25 0 13.34 20 1.5 11.25 1235 560 150 7.5 23.5 13.063 15.25 16 1 6 388 176 300 9.125 25.5 13 15.25 20 1.25 8.25 664 301 600 12 27 13 15.25 20 1.5 10.25 996 451 900 15.125 27.75 6.375 15.25 20 1.625 11.75 1206 547 150 8 25 15.563 17.25 16 1.125 6.5 464 210 300 10.375 28 15.375 17.25 24 1.25 8.5 862 3925 600 14.25 29.25 13 17.25 20 1.625 11 1319 598 900 17.75 31 9.625 17.25 20 1.875 13.5 1842 835 53

FLANGED - DUAL PLATE CHECK VALVES VALVE 20 (508 mm) 24 (610 mm) 26 (660 mm) 28 (711 mm) 30 (762 mm) 32 (813 mm) 36 (914 mm) 40 (1016 mm) 42 (1067 mm) 48 (1219 mm) PRESSURE STUD SELECTION APPROX WEIGHT A B C E RATING NO. DIAMETER LENGTH LB KG 150 8.625 27.5 17.25 19.19 20 1.125 7 596 270 300 11.5 30.5 17.25 19.19 24 1.25 9 1080 489 600 14.5 32 17 19.19 24 1.625 11.75 1680 762 900 17.75 33.75 16 19.19 20 2 14.5 3931 1783 150 8.75 32 21.125 22.78 20 1.25 7.5 842 381 300 12.5 36 20.625 22.78 24 1.5 10.25 1664 756 600 17.25 37 20.063 22.78 24 1.875 13.5 2520 1143 900 19.5 41 17.5 22.78 20 2.5 18.25 4164 1888 150 14 34.25 23.5 24.78 24 1.25 9 2215 1007 300 14 38.25 23.5 24.78 28 1.625 11 2724 1238 600 18 40 22.75 24.78 28 1.875 14.625 3120 1418 900 21 42.75 22 24.78 20 2.75 19.125 4380 1991 150 12 36.5 25.5 26.78 28 1.25 9.25 2255 1025 300 15 40.75 25.5 26.78 28 1.625 11.5 2464 1120 600 19 42.25 24.75 26.78 28 2 15.375 3227 1467 900 22.5 46 24 26.78 20 3 20.5 5337 2426 150 12 38.75 25.25 28.93 28 1.25 9.5 1745 793 300 14.5 43 25.25 28.93 28 1.75 12 3527 1603 600 19.875 44.5 23 28.93 28 2 16 5379 2445 900 25 48.5 23 28.93 20 3 21.375 6776 3080 150 14 41.75 25.25 30.87 28 1.5 10.5 5168 2349 300 16 45.25 25.25 30.87 28 1.875 12.625 6057 2753 600 21 47 24 30.87 28 2.25 17.125 6457 2935 900 26 51.75 24 30.87 20 3.25 22.75 7535 3425 150 14.5 46 25.5 34.04 32 1.5 11.25 2526 1148 300 19 50 25.5 34.04 32 2 13.75 4701 2137 600 25 51.75 20.75 34.04 28 2.5 18.75 10417 4735 900 28.25 57.5 14 34.04 20 3.5 24.875 t t 150 17 50.75 34.75 38.87 36 1.5 11.25 3333 1515 300 21.5 48.75 29.5 35.78 32 1.625 13.25 6761 3073 600 26 52 29.25 35.78 32 2.25 18.25 13891 6314 900 30 59.5 29 35.78 24 3.5 25.625 14714 6688 150 17 53 36.813 41.81 36 1.5 11.625 4200 1909 300 22.375 50.75 32.938 39.98 32 1.625 13.625 9744 4429 600 27.625 55.25 25.5 38.26 28 2.5 19.5 11612 5278 900 31 61.5 23 38.26 24 3.5 26.25 t t 150 20.625 59.5 40.813 46.98 44 1.5 12.5 7374 3352 300 24.75 57.75 38 44.73 32 1.875 15.25 11022 5010 600 31 62.75 35 44.73 32 2.75 22 13402 6092 54

Gate Valves Forged Steel Sizes 3/8-2 Class 800-2500 Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B1.20.1 Inspection & Testing API 598 55

Forged Steel Gate Valves Class 800 3/8-2 L 1 FORGED STEEL GATE VALVES 2 3 5 7 9 11 12 4 6 8 10 13 14 L1 D2 D1 Socket Weld Ends 17 15 16 D Bill of material NO NAME OF PART MATERIAL 1 LOCK NUT CARBON STEEL AISI 1020 2 HANDWHEEL MALLEABLE IRON 3 WASHER ASTM A276 430 4 STEM NUT ASTM A276 410 5 EYE BOLT ASTM A276 410 6 EYE BOLT NUT ASTM A194 2H 7 GLAND FLANGE ASTM A216 WCB 8 PACKING GLAND ASTM A276 410 9 EYE BOLT PIN ASTM A276 410 10 PACKING GRAPHITE 11 BOLT ASTM A193 B7 12 BONNET ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 13 GASKET GRAPHITE 14 STEM ASTM A276 410 15 WEDGE ASTM A276 420 16 SEAT RING ASTM A276 410+HF 17 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE D D1 D2 - in.375.5.75 1 1.25 1.5 2 VALVE in.375.5.75 1 1.25 1.5 2 mm 10 13 19 25 32 38 51 mm 10 13 19 25 32 38 51 in.39.51.71.94 1.14 1.44 1.83 in 3.11 3.62 4.37 4.72 4.72 5.51 7.01 A mm 10 13 18 24 29 36.5 46.5 mm 79 92 111 120 120 140 178 in 1.34 1.34 1.57 1.89 2.52 2.52 3.07 in 6.22 6.46 7.64 8.70 9.61 11.10 12.99 mm 34 34 40 48 64 64 78 mm 158 164 194 221 244 282 330 in.69.86 1.07 1.33 1.68 1.92 2.41 in 3.94 3.94 4.92 6.30 6.30 7.09 7.87 L mm 17.6 21.8 27.1 33.8 42.6 48.7 61.1 mm 100 100 125 160 160 180 200 - - - - - - - - in.38.38.5.5.5.5.63 L1 - - - - - - - - mm 9.6 9.6 12.7 12.7 12.7 12.7 15.9 A 56

Globe Valves Forged Steel Sizes 3/8-2 Class 800-2500 Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B1.20.1 Inspection & Testing API 598 57

Forged Steel Globe Valves Class 800 3/8-2 L 2 3 FORGED STEEL GLOBE VALVES 1 4 D2 D1 5 7 11 6 8 9 10 L1 Socket Weld Ends 12 14 15 13 16 D 17 Bill of material NO NAME OF PART MATERIAL 1 LOCK NUT CARBON STEEL AISI 1020 2 HANDWHEEL MALLEABLE IRON 3 WASHER CARBON STEEL AISI 1020 4 STEM NUT ASTM A276 410 5 EYE BOLT ASTM A276 410 6 EYE BOLT NUT ASTM A194 2H 7 GLAND FLANGE ASTM A216 WCB 8 PACKING GLAND ASTM A276 410 9 EYE BOLT PIN ASTM A276 410 10 PACKING GRAPHITE 11 BOLT ASTM A193 B7 12 BONNET ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 13 GASKET GRAPHITE 14 STEM ASTM A276 410 15 DISC ASTM A276 420 16 SEAT INTEGRAL+HF 17 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE in.375.5.75 1 1.25 1.5 2 VALVE in.375.5.75 1 1.25 1.5 2 mm 10 13 19 25 32 38 51 mm 10 13 19 25 32 38 51 D in.39.51.69.91 1.18 1.38 1.81 in 3.11 3.62 4.37 4.72 4.7 5.98 6.77 A mm 10 13 17.5 23 30 35 46 mm 79 92 111 120 120 152 172 D1 in 1.34 1.34 1.57 1.89 2.52 2.52 3.07 in 6.57 6.57 8.03 8.98 9.92 11.61 12.87 mm 34 34 40 48 64 64 78 mm 167 167 204 228 252 295 327 D2 in.69.86 1.07 1.33 1.68 1.92 2.41 in 3.94 3.94 4.92 6.30 6.30 7.09 7.87 L mm 17.6 21.8 27.1 33.8 42.6 48.7 61.1 mm 100 100 125 160 160 180 200 - - - - - - - - - in.38.38.5.5.5.5.63 L1 - - - - - - - - mm 9.6 9.6 12.7 12.7 12.7 12.7 15.9 A 58

Piston Check Valves Forged Steel Sizes 3/8 thru 2 Class 800-2500 Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B1.20.1 Inspection & Testing API 598 59

Forged Steel Piston Check Valves Class 800 3/8-2 FORGED STEEL PISTON CHECK VALVES 1 2 4 3 D 5 6 A D2 D1 Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193 B7 2 COVER ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 3 GASKET GRAPHITE 4 DISC ASTM A276 420 5 SEAT INTEGRAL+HF 6 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE D D1 D2 in.375.5.75 1 1.25 1.5 2 VALVE in.375.5.75 1 1.25 1.5 2 mm 10 13 19 25 32 38 51 mm 10 13 19 25 32 38 51 in.39.51.71.94 1.14 1.44 1.83 in.38.38.5.5.5.5.63 L1 mm 10 13 18 24 29 36.5 46.5 mm 9.6 9.6 12.7 12.7 12.7 12.7 15.9 in 1.34 1.34 1.57 1.89 2.52 2.52 3.07 in 3.11 3.62 4.37 4.72 5.98 6.77 7.87 A mm 34 34 40 48 64 64 78 mm 79 92 111 120 120 172 200 in.69.86 1.07 1.33 1.68 1.92 2.41 in 6.22 6.46 7.64 8.70 9.61 11.10 12.99 mm 17.6 21.8 27.1 33.8 42.6 48.7 61.1 mm 158 164 194 221 244 282 330 L1 Socket Weld Ends 60

Swing Check Valves Forged Steel Sizes 3/8 thru 2 Class 800-2500 Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B1.20.1 Inspection & Testing API 598 61

Forged Steel Swing Check Valves Class 800 3/8-2 FORGED STEEL SWING CHECK VALVES 1 H 2 6 7 9 4 3 5 8 A D D2 D1 L1 Socket Weld Ends Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193 B7 2 COVER ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 3 GASKET GRAPHITE 4 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 5 SUPPORTER AISI 304 6 HINGE PIN ASTM A276 410 7 HINGE ASTM A217 CA15 8 SEAT RING ASTM A276 410+HF 9 DISC ASTM A743 CA40 DIMENSIONS OF SOCKET WELD ENDS VALVE DIMENSIONS in.375.5.75 1 1.25 1.5 2 VALVE in.375.5.75 1 1.25 1.5 2 mm 10 15 20 25 32 40 50 mm 10 15 20 25 32 40 50 D in.39.51.71.94 1.14 1.44 1.83 L1 in.38.38.5.5.5.5.63 mm 10 13 18 24 29 36.5 46.5 mm 9.6 9.6 12.7 12.7 12.7 12.7 15.9 D1 in 1.34 1.34 1.57 1.89 2.52 2.52 3.07 A in 3.11 3.62 4.37 4.72 4.72 5.51 6.69 mm 34 34 40 48 64 64 78 mm 79 92 111 120 120 140 170 D2 in.69.86 1.07 1.33 1.68 1.92 2.41 in 6.22 6.46 7.64 8.70 9.61 11.10 12.99 mm 17.6 21.8 27.1 33.8 42.6 48.7 61.1 mm 158 164 194 221 244 282 330 62

Pressure Balance Lubricated Plug Valves Cast Steel Sizes 1/2-24 Class 150-1500 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 63

Pressure Balance Lubricated Plug Valves Class 150-1500 1/2-24 11 12 13 PRESSURE BALANCED LUBRICATED PLUG VALVES 10 7 9 8 6 3 5 4 2 1 Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193-B7, A193-B8, A193-B8M 2 NUT ASTM A194-2H, A194-8, A194-8M 3 COVER ASTM A216-WCB, WCC, C5, A351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 4 GASKET FLEXIBLE GRAPHITE, STAINLESS STEEL, PTFE 5 PLUG ASTM A182-GR. F6A, ASTM A182-F22, ASTM A-351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 6 BODY ASTM A216-WCB, WCC, C5, A351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 7 STEM ASTM A182-GR. F6A, ASTM A182-F22, ASTM A182-F304, F316, F321, F304L, F31 6L, 17-4 8 O-RING NBR 9 PACKING FLEXIBLE GRAPHITE, PTFE 10 GLAND Cast 11 OIL NOZZLE Plated 12 CHECK VALVE SS 13 WRENCH ASTM A47-32510, A216 WCB L-RF L-BW CLASS 150 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in.5.75 1 1.25 1.5 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 30 mm 13 19 25 32 38 51 64 76 102 127 152 203 254 305 356 406 457 508 610 762 A-RF in 4.25 4.5 5 5.5 6.5 7 7.5 8 9 10 10.5 11.5 13 14 27 30 34 36 42 51 mm 108 117 127 140 165 178 190 203 229 254 267 292 330 356 686 762 864 914 1067 1295 A-BW in 6 7 8 8.5 9 10.5 12 13 14 15 15.5 18 21 24 27 30 34 36 42 51 mm 152 178 203 216 229 267 305 330 356 381 394 457 533 610 686 762 864 914 1067 1295 Ib 26.5 31 35 42 46 53 68 79 134 189 286 418 561 836 1232 1420 2020 2800 3900 6200 kg 12 14 16 19 21 24 31 36 61 86 130 190 255 380 560 645 918 1273 1773 2818 CLASS 300 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in.5.75 1 1.25 1.5 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 30 mm 13 19 25 32 38 51 64 76 102 127 152 203 254 305 356 406 457 508 610 762 A-RF in 5.5 6 6.5 7 7.5 8.5 9.5 11 12 15 16 16.5 18 19.75 30 33 36 39 45 55 mm 140 152 165 178 190 216 241 283 305 381 403 419 457 502 762 838 914 991 1143 1397 A-BW in 6 7 8 8.5 9 10.5 12 13 14 15 18 20.5 22 25 30 33 36 39 45 55 mm 152 178 203 216 229 267 305 330 356 381 457 521 559 635 762 838 914 991 1143 1397 Ib 26.5 31 35 42 46 53 68 79 134 189 286 418 561 836 1232 1820 2700 3340 5500 11530 kg 12 14 16 19 21 24 31 36 61 86 130 190 255 380 560 827 1227 1518 2500 5241 64

PRESSURE BALANCED LUBRICATED PLUG VALVES A-RF A-BW CLASS 600 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in.5.75 1 1.25 1.5 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 30 mm 13 19 25 32 38 51 64 76 102 127 152 203 254 305 356 406 457 508 610 762 A-RF in 6.5 7.5 8.5 7.5 9.5 11.5 13 14 17 20 22 26 31 33 35 39 43 47 55 65 A-BW mm 165 190 216 229 241 292 330 356 432 508 559 660 787 838 889 991 1092 1194 1397 1651 Ib 31 35 39.5 44 53 64 77 103.5 200 284 462 704 1452 2024 2750 3400 4200 5500 9900 13970 kg 14 16 18 20 24 29 35 47 91 129 210 320 660 920 1250 1545 1909 2500 4500 6350 CLASS 900 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in.5.75 1 1.25 1.5 2 2.5 3 4 5 6 8 10 12 14 16 18 20 mm 13 19 25 32 38 51 64 76 102 127 152 203 254 305 356 406 457 508 A-RF in 9 9 10 11 12 14.5 16.5 15 18 22 24 29 33 38 40.5 44.5 48 52 A-BW mm 229 229 254 279 305 368 419 381 457 559 610 737 838 965 1029 1130 1219 1321 Ib 37 46 53 64 66 81 97 143 242 352 561 836 1782 2310 3212 4430 6400 9000 kg 17 21 24 29 30 37 44 65 110 160 255 380 810 1050 1460 2014 2909 4091 CLASS 1500 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in.5.75 1 1.25 1.5 2 2.5 3 4 6 8 10 12 14 16 mm 13 19 25 32 38 51 64 76 102 152 203 254 305 356 406 A-RF in 9 9 10 11 12 14.5 16.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 A-BW mm 229 229 254 279 305 368 419 470 546 705 933 991 1130 1257 1384 Ib 44 55 64 77 79 97 117 172 290 673 1003 2138 2772 3854 5315 kg 20 25 29 35 36 44 53 78 132 306 456 972 1260 1752 2416 CLASS 2500 - pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in 2 2.5 3 4 6 8 10 12 mm 50 65 80 100 150 200 250 300 A-RF in 17.75 20 22.75 26.50 36 40.25 50 56 A-BW mm 451 508 578 673 914 1022 1270 1422 Ib 145 180 270 420 1350 2220 4025 6200 kg 66 82 123 191 614 1009 1830 2818 65

Dual Seal Expanding Plug Valves Cast Steel Sizes 2-24 Class 150-900 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 66

Dual Seal Expanding Plug Valves Class 150-900 2-24 DUAL SEAL EXPANDING PLUG VALVES W 19 17 18 16 H1 15 14 13 11 A 12 9 1 8 10 3 6 7 3 4 5 2 Bill of material NO NAME OF PART ASTM NO NAME OF PART ASTM 1 BODY A216-WCB 11 UP COVER A216-WCB 2 BONNET A216-WCB 12 STEM A182 F6a 3 BUSHING 95200 13 SEAL RING A182 F6a 4 O-RING FPM 14 PACKING 304+GRAPHITE 5 GASKET 304+GRAPHITE 15 PACKING GLAND A216-WCB 6 STUD BOLT A193 B7 16 YOKE A216-WCB 7 NUT A184 2H 17 BUSHING A536 65-45-12+FPM 8 PLUG A216-WCB 18 GUIDE PIN 17-4 PH 9 SLIP A536 65-45-12+FPM 19 HANDWHEEL DUCTILE IRON 10 SLIP SEAL VITON 20 - - 67

DUAL SEAL EXPANDING PLUG VALVES CLASS 150 - DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE A H1 W 1 2 in 2 3 4 6 8 10 12 14 16 18 20 24 mm 51 76 105 152 203 254 305 356 406 457 508 610 in 7 8 9 10.5 11.5 13 14 15 16 17 32 36 mm 179 203 229 267 292 330 356 381 406 432 813 914 in 4.5 4.5 7 8.5 10.5 12 14.5 16 18 16 17 25.5 mm 114 114 179 216 267 305 368 406 457 406 432 648 in 12 12 15.5 17.5 22 23 31 32.5 39 36 37 44 mm 305 305 394 445 559 584 787 826 991 914 940 1118 in 8 8 10 10 14 14 20 20 20 20 20 20 mm 200 200 250 250 350 350 500 500 500 500 500 500 Ib 64 76 140 214 436 532 844 1074 1488 2658 3326 6264 kg 141 167 308 471 959 1170 1857 2363 3274 5848 7317 13781 in.375.375.5.5.5.5.5.5.5.5.5.5 mm 10 10 13 13 13 13 13 13 13 13 13 13 in.25.25.25.25.25.25.25.5.5.5.75 1 mm 6 6 6 6 6 6 6 13 13 13 19 25 CLASS 300 - DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE A H1 W 1 2 in 2 3 4 6 8 10 12 14 16 18 20 24 mm 51 76 105 152 203 254 305 356 406 457 508 610 in 8.5 11.125 12 15.875 16.5 18 19.75 30 33 36 39 52 mm 216 283 300 403 419 450 502 750 838 900 991 1321 in 4.5 4.5 7 9 11 12.5 16.5 14.5 14 20.5 24.5 25.5 mm 114 114 178 229 279 318 419 368 356 521 622 648 in 12 12 15.5 20.5 28 29 36.5 34.5 36.5 40.5 48 50.5 mm 300 300 394 521 711 737 927 876 927 1029 1219 1283 in 8 8 10 14 20 20 20 20 20 20 32 32 mm 200 200 250 350 500 500 500 500 500 500 800 800 Ib 78 102 162 348 665 888 1414 1990 2662 3550 4155 8150 kg 34 46 74 158 302 404 653 905 1210 1614 1889 3705 in.375.375.5.5.5.5.5.5.5.5.5 1 mm 10 10 13 13 13 13 13 13 13 13 13 25 in.25.25.25.25.25.25.25.5.5.5.5 1 mm 6 6 6 6 6 6 6 13 13 13 13 25 68

DUAL SEAL EXPANDING PLUG VALVES CLASS 600 - DUAL SEAL Expanding plug valves DIMENSIONS & WEIGHTS VALVE in 2 3 4 6 8 10 12 14 16 20 24 mm 51 76 102 152 203 254 305 356 406 508 610 A in 11.5 14 17 22 26 31 33 35 39 47 55 mm 292 356 432 559 660 787 838 889 991 1194 1397 H1 in 5.5 6 7 9 11 16 17 19.5 19.5 23.5 26 mm 140 152 178 229 279 406 432 495 495 597 660 in 15.5 16 19 26 27 36.5 38 47 57 66 72 mm 393 406 482 660 685 927 965 1194 1447 1676 1828 W in 11.8 11.8 15.75 18.1 18.1 23.6 23.6 23.6 23.6 23.6 23.6 mm 300 350 400 460 460 600 600 600 600 600 600 Ib 100 149 276 696 1102 1974 2532 4100 4300 9500 15000 kg 45 68 125 316 501 897 1151 1864 1955 4318 6818 1 in.5.5.5.5.5.5.5.5.5 1 1 mm 13 13 13 13 13 13 13 13 13 25 25 2 in.25.25.25.25.25.5.5.5.5 1 1 mm 6 6 6 6 6 13 13 13 13 25 25 CLASS 900 - DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE in 2 3 4 6 8 10 mm 51 76 102 152 203 254 A in 14.5 15 18 24 29 33 mm 368 381 457 609 736 838 H1 in 7 8 10 11.5 16.5 21 mm 178 203 254 292 419 553 in 19 20 22 26 37 51.5 mm 482 508 558 660 940 1308 W in 12.2 12.2 18.1 18.1 23.6 23.6 mm 310 310 460 460 600 600 Ib 180 235 397 975 1440 3600 kg 82 107 180 975 655 1636 1 in.5.5.5.5.5.5 mm 13 13 13 13 13 13 2 in.25.25.5.5.5.5 mm 6 6 13 13 13 13 69

3-Piece Full Port Ball Valves Carbon & Stainless Steel Sizes.25-3 Class 2000 W.O.G Design and Manufacturing Standards Basic Design ANSI B 16.34S EN 12516-1 Thread End Dimension ANSI B 1.201 Socket Weld End Dimension ANSI B16.11 Inspection & Testing API 598 70

3-Piece Full Port Ball Valves CARBON & STAINLESS STEEL 3-PIECE FULL PORT BALL VALVES 2000 W.O.G. Threaded Ends (ISO 5211 mounting pad), socket weld ends (ansi b 16.11), & butt weld ends (ansi 16.25) 1/4 thru 2 : 2000 psi W.O.G. 2-1/2 thru 3 : 1500 psi W.O.G. M 10 11 15 16 I X E 9 17 12 8 7 6 14 K J W 37.5 Socket Weld 2 5 D F 4 3 1 13 features 3-piece design for fast, economical in-line maintenance Reinforced TFE seats increase durability Strengthened construction secures 2000 psi rating Bottom-loaded blow-out proof stem Mounting pad complies with ISO 5211 for actuation ease and interchangeability Re, Rp & G Threaded ends comply with BS 21/2779, JIS B-0203/ 0202, DIN259/2999, ISO 228-1, AS 1722.1/1722.2 are upon request NPT threaded ends complied with ANSI B 1.20.1 Basic design complied with ANSI B16.34 & EN 12516-1 Tested according to API 598 Bill of material A-SW & A-BW NO NAME OF PART STAINLESS STEEL CARBON STEEL 1 BODY ASTMA351-CF8M ASTMA216-WCB 2 END CAP ASTMA351-CF8M ASTMA216-WCB 3 BALL ASTMA351-CF8M/316 ASTMA351-CF8/304 4 SEAT REINFORCED TFE REINFORCED TFE 5 O-RING PTFE PTFE 6 STEM BUSHING PTFE PTFE 7 STEM PACKING PTFE PTFE 8 PACKING GLAND AISI304 AISI304 9 STEM ASTMA276-316 ASTMA276-304 10 HANDLE WASHER AIS1304 AISI304 11 STEM NUT AISI304 AISI304 12 BONNET NUT AISI304/GR. B8 CARBON STEEL/GR.B7 13 WASHER AISI304/GR. 8 CARBON STEEL/ GR.2H 14 BODY STUD AISI304 CARBON STEEL 15 HANDLE AISI304 ZINC PLATED STEEL 16 HANDLE COVER PVC PVC 17 STOP SCREW AIS1304 CARBON STEEL Butt Weld 71

CARBON & STAINLESS STEEL 3-PIECE FULL PORT BALL VALVES 3-piece full port ball valves DIMENSIONS VALVE D A-SW A-BW E F I J K G 2000 PSI 1500 PSI in.25.375.5.75 1 1.25 1.5 2 2.5 3 mm 6 10 13 19 25 32 38 51 64 76 in 0.43 0.49 0.59 0.79 1.00 1.26 1.50 1.97 2.56 3.15 mm 11 12.5 15 20 25.4 32 38 50 65 80 in 2.56 2.56 2.76 3.15 3.54 4.13 4.72 5.28 6.26 11.57 mm 65 65 70 80 90 105 120 134 159 292 in 2.56 2.56 2.80 3.23 3.62 4.33 5.00 5.91 7.20 8.27 mm 65 65 71 82 92 110 127 150 183 210 in.555.690.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 mm 14.2 17.6 21.8 27.2 33.9 42.7 48.8 61.2 73.9 89.9 in.36.36.50.75.98 1.22 1.50 1.97 2.95 3.54 mm 14.6 18.3 22.4 27.8 34.7 43.3 49.3 61.4 75 90 in 0.20 0.20 0.20 0.24 0.31 0.31 0.31 0.31 0.47 0.47 mm 5 5 5 6 8 8 8 8 12 12 in 0.31 0.31 0.31 0.39 0.47 0.47 0.55 0.55 0.79 0.79 mm 8 8 8 10 12 12 14 14 20 20 in 0.37 0.37 0.47 0.54 0.70 0.70 0.71 0.71 1.14 1.14 mm 9.5 9.5 12 13.7 17.7 17.7 18 18 29 29 in 1.42 1.42 1.42 1.42 1.65 1.65 1.97 1.97 2.76 2.76 mm 36 36 36 36 42 42 50 50 70 70 mm M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M W X in 2.13 2.13 2.24 2.46 2.70 2.91 3.56 3.92 5.06 5.49 mm 54 54 57 62.5 68.5 74 90.5 99.5 128.5 139.5 in 5.31 5.31 5.31 5.31 6.50 6.50 6.89 6.89 9.57 9.57 mm 135 135 135 135 165 165 175 175 243 243 in.39.39.51.59.59.59.63.67.67.67 mm 10 10 13 15 15 15 16 17 17 17 72

2-Piece Flanged Floating Ball Valves Full & Reduced Port Carbon & Stainless Steel Sizes 1/2-10 Class 150-1500 Design and Manufacturing Standards Basic Design ANSI B 16.34 Face to Face Dimension ANSI B 16.10 Flange End Dimension ANSI B 16.5 Inspection & Testing API 598 Fire Safe Design API 6FA/BS 6755 73

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves - Full & Reduced Port Class 150-1500 17 16 14 13 15 12 11 10 8 1 2 18 9 5 6 4 3 7 74

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves - Full & Reduced Port Class 150-1500 Bill of Materials No Name of Part Stainless Steel Carbon Steel 1 Body End Cap ASTM A351-CF8M ASTM A216-WCB 2 Nut AISI/ASME 304/GR.8 Carbon Steel/GR.2H 3 Body Joint Bolt AISI/ASME 304/GR.B8 Carbon Steel/GR.B7 4 Body Gasket PTFE PTFE 5 Ball ASTM A351-CF8M/316 ASTM A351-CF8M/316 6 Seat PTFE PTFE 7 Body ASTM A351-CF8M ASTM A216-WCB 8 Stem ASTM A276-316 ASTM A276-316 9 Stem Thrustwasher PTFE PTFE 10 Stem Packing PTFE PTFE 11 Gland Flange ASTM A351-CF8 ASTM A351-CF8 12 Handle Stop AISI/ASME 304 AISI/ASME 304 13 Snapring AISI/ASME 420 AISI/ASME 420 14 Handle Carbon Steel Carbon Steel 15 Gland Bolt AISI/ASME 304 AISI/ASME 304 16 Washer AISI/ASME 304 AISI/ASME 304 17 Cap Screw AISI/ASME 304 AISI/ASME 304 18 Anti-static Device 316SS 316SS Note: Additional materials available upon request Features Split body design with flanged ends for fast installation, in-line maintenance and rebuilding Solid ball construction provides structural integrity and minimizes flow turbulence Mounting pad complies with ISO 5211 for ease and interchangeability of actuation Bottom-loaded blow-out proof stem Investment cast body & end cap on sizes 1/2 to 4. Sand cast body & end cap on sizes 5 to 10 Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque Basic design complies with ASME/ANSI B16.34 Flanged ends comply with ASME/ANSI B16.5 Face-to-face dimensions comply with ASME/ANSI B16.10 Tested according to ANSI/ASME B16.34 & API 598 75

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS 150-2-piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5* 0.59 4.25 1.38 2.38 3.50 3.15 5.12 5 MM 15 15 108 35 61 89 80 130 2.3 IN.75*.079 4.62 1.69 2.75 3.88 3.27 5.12 7 MM 20 20 117 43 70 99 83 130 3.0 IN 1* 1.00 5.00 2.00 3.12 4.25 3.82 6.30 10 MM 25 25 127 51 79 108 97 160 4.5 IN 1.5* 1.57 6.50 2.88 3.88 5.00 4.37 9.06 15 MM 35 40 165 73 99 127 111 230 7.0 IN 2* 1.97 7.00 3.62 4.75 6.00 4.65 9.06 21 MM 50 50 178 92 121 152 118 230 9.5 IN 2.5* 2.56 7.50 4.12 5.50 7.00 5.67 15.75 33 MM 65 65 191 105 140 178 144 400 15.0 IN 3* 3.15 8.00 5.00 6.00 7.50 6.06 15.75 42 MM 80 80 203 127 152 191 154 400 19.0 IN 4* 3.94 9.00 6.19 7.50 9.00 6.85 18.11 73 MM 100 100 229 157 191 229 174 460 33.0 IN 6* 5.91 15.50 8.50 9.50 1 1.00 9.45 21.65 165 MM 150 150 394 216 241 279 240 550 75.0 IN 8 7.87 18.00 10.62 11.75 13.50 11.81 39.37 253 MM 200 200 457 270 299 343 300 1000 115.0 IN 10 9.84 21.00 12.75 14.25 16.00 13.98 39.37 506 MM 250 250 533 324 362 406 355 1000 230.0 76

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS 150-2-piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 2 x 1* 2.00 1.00 7.00 3.62 4.75 6.00 4.65 9.06 21 MM 25 51.00 25.00 178 92 121 152 118 230 9.5 IN 3 x 2* 3.00 2.00 8.00 5.00 6.00 7.50 6.06 15.75 42 MM 50 76.00 51.00 203 127 152 191 154 400 19.0 IN 4 x 3* 4.00 3.00 9.00 6.19 7.50 9.00 6.85 18.11 73 MM 80 102.00 76.00 229 157 191 229 174 460 33.0 IN 6 x 4* 6.00 4.00 15.50 8.50 9.50 1 1.00 9.45 21.65 165 MM 100 152.00 102.00 394 216 241 279 240 550 75.0 IN 8 x 6 8.00 6.00 18.00 10.62 11.75 13.50 11.81 39.37 253 MM 150 203.00 152.00 457 270 299 343 300 1000 115.0 IN 10 x 8 10.00 8.00 21.00 12.75 14.25 16.00 13.98 39.37 506 MM 200 254 203 533 324 362 406 355 1000 230.0 77

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS 300-2-piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5* 0.59 5.50 1.38 2.62 3.75 2.48 5.12 5.5 MM 15 15 140 35 67 95 63 130 2.5 IN.75*.079 6.00 1.69 3.25 4.62 2.68 5.12 8 MM 20 20 152 43 83 117 68 130 3.6 IN 1* 1.00 6.50 2.00 3.5 4.88 2.99 6.30 12 MM 25 25 165 51 89 124 76 160 5.5 IN 1.5* 1.57 7.50 2.88 4.50 6.12 3.46 9.06 23 MM 35 40 191 73 114 155 88 230 10.5 IN 2* 1.97 8.50 3.62 5.00 6.50 3.70 9.06 32 MM 50 50 216 92 127 165 94 230 14.5 IN 2.5* 2.56 9.50 4.12 5.88 7.50 4.53 15.75 52 MM 65 65 241 105 149 191 115 400 23.5 IN 3* 3.15 11.12 5.00 6.62 8.25 4.72 15.75 66 MM 80 80 282 127 168 210 120 400 30.0 IN 4* 3.94 12.00 6.19 7.88 10.00 7.68 18.11 143 MM 100 100 305 157 200 254 195 460 65.0 IN 6 5.91 16 8.50 10.62 12.50 9.45 21.65 209 MM 150 150 403 216 270 318 240 550 95.0 IN 8 7.87 20 10.62 13.00 15.00 11.81 39.37 330 MM 200 200 502 270 330 381 300 1000 150.0 IN 10 9.84 22.38 12.75 15.25 17.50 13.98 39.37 550 MM 250 250 568 324 387 445 355 1000 250.0 78

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS 300-2-piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 2 x 1* 2.00 1.00 8.50 3.62 5.00 6.50 3.70 9.06 32 MM 25 51.00 25.00 216 92 127 165 94 230 14.5 IN 3 x 2* 3.00 2.00 11.12 5.00 6.62 8.25 4.72 15.75 66 MM 50 76.00 51.00 282 127 168 210 120 400 30.0 IN 4 x 3* 4.00 3.00 12.00 6.19 7.88 10.00 7.68 18.11 143 MM 80 102.00 76.00 305 157 200 254 195 460 65.0 IN 6 x 4* 6.00 4.00 16 8.50 10.62 12.50 9.45 21.65 209 MM 100 152.00 102.00 403 216 270 318 240 550 95.0 IN 8 x 6 8.00 6.00 20 10.62 13.00 15.00 11.81 39.37 330 MM 150 203.00 152.00 502 270 330 381 300 1000 150.0 IN 10 x 8 10.00 8.00 22.38 12.75 15.25 17.50 13.98 39.37 550 MM 200 254 203 568 324 387 445 355 1000 250.0 79

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS 600-2-piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5*.51 6.5 / 2.63 3.74 3.54 4.72 12 MM 13 13 165 / 66.7 95 90 120 5 IN.75*.75 7.5 / 3.25 4.53 3.66 5.52 18 MM 19 19 190 / 82.6 115 93 140 8 IN 1* 1 8.5 / 3.50 4.92 3.94 6.49 25 MM 25 25 210 / 88.9 125 100 165 11 IN 1.5* 1.5 9.5 / 4.50 6.10 4.96 7.87 30 MM 38 38 241 / 114.3 155 126 200 14 IN 2* 2 11.5 3.62 5.00 6.50 5.31 9.06 40 MM 50 51 292 92 127 165 135 230 18 IN 3* 3 14 5.00 6.62 8.25 6.7 15.75 75 MM 80 76 356 127 168 210 170 400 34 IN 4* 4 17 6.19 8.5 10.75 8.1 18.11 165 MM 100 102 432 157 200 254 206 460 75 IN 6 6 22 8.50 11.5 14 13.1 21.65 221 MM 150 152 559 216 270 318 331 550 101 80

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS 600-2-piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 3 x 2* 2 2 14 5.00 6.62 8.25 5.6 15.75 75 MM 50 51 51 356 127 168 210 142 400 34 IN 4 x 3* 3 3 17 6.19 8.5 10.75 6.7 18.11 165 MM 80 76 76 432 157 216 273 170 460 75 IN 6 x 4 4 4 22 8.50 11.5 14 8.1 21.65 221 MM 100 102 102 559 216 292 356 206 550 101 81

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF A - RTJ CLASS 1500-2-piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED BOLT CIRCLE FLANGE CENTER - LEVER FACE OD DIAMETER OD TO - TOP LENGTH D A - RF A - RTJ R C B W WEIGHTS LBS/KG IN.5*.51 8.5 8.6 / 3.3 4.7 3.9 9.06 14 MM 13 13 216 219 / 83 120 99 230 6 IN.75*.75 9 9.1 / 3.5 5.2 4 9.06 20 MM 19 19 229 231 / 89 130 102 230 9 IN 1* 1 10 10.0 / 4.1 5.9 4.5 9.06 29 MM 25 25 254 257 / 102 150 115 230 13 IN 1.5* 1.5 12 12.2 / 4.9 7.1 5.7 9.06 40 MM 38 38 305 308 / 124 180 144 230 18 IN 2* 1.97 14.48 14.6 3.62 5.00 6.50 6.29 9.06 48 MM 51 50 368 371 92 127 165 160 230 22 82

CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves Full & Reduced Port Flow Coefficients Cv Values and Opening Torques for Soft Seats Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size 150 300 600 1500 Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port.5 24 14 24 14 21 / 14.75 55 31 55 31 44 / 34 1 100 55 100 55 75 / 60 1.5 260 123 260 123 237 / 180 2 450 218 450 218 405 / 305 2.5 720 340 720 340 590 / / 3 1100 490 1100 490 745 590 / 4 2200 880 2200 880 1830 1000 / 6 5500 1980 5500 1980 4570 2860 / 8 10000 3500 10000 3500 / / / 10 17000 5460 17000 5460 / / / Opening Torques for Soft Seats The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size ISO5211 150 300 600 1500 Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port.5 5 5 7 7 13 / 26 F03/F04.75 7 7 12 12 18 / 37 1 12 12 18 18 30 / 74 F05/F06 1.5 26 26 37 37 67 / 133 2 37 37 52 52 81 / 199 F10 2.5 59 59 74 74 122 / / 3 89 89 118 118 221 221 / 4 F10/F12 133 133 207 207 443 443 / 6 177 177 738 738 1438 1438 / 8 F14 708 708 1549 1549 / / / 10 F16 1328 1328 2508 2508 / / / Notes 1 Torques may change with different mediums and trim materials. 2 All valves are at normal temperature with PTFE seats for Class 150 and 300 lbs. Nylon seats for class 600 through 1500. 3 All torques are at maximum differential. Safety factor not included. 83

2-Piece Trunnion Mounted Ball Valves Full & Reduced Port Carbon & Stainless Steel Sizes 2-24 Class 150-1500 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI/ASME B16.5 (2 to 24 ) Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS 6755 84

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves - Full & Reduced Port Class 150-1500 9 10 11 12 34 31 32 33 13 19 15 18 2 16 17 14 23 6 4 7 1 24 20 26 25 28 21 27 29 3 5 22 8 30 85

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves - Full & Reduced Port Class 150-1500 Bill of Materials No Name of Part Materials 1 Body ASTM A216, WCB ASTM A351, CF8M ASTM A352, LCC 2 Vent Carbon Steel Stainless Steel 3 Ball ASTM A105, ENP ASTM A182 F316, 410 4 Seat O-ring NBR/Viton 5 Seat Ring ASTM A105, ENP ASTM A182 F316, 410 6 Seat Insert PTFE, Nylon 7 Seat Spring Inconel X-750 8 Flange Adapter Stainless Steel 9 T-bar Cap Stainless Steel 10 T-bar Bolt Stainless Steel 11 T-bar Washer Carbon Steel 12 T-bar Carbon Steel Stainless Steel 13 Gland Flange ASTM A105 ASTM A182 F316, 410 14 Gland Gasket 304SS + Graphite 316SS + Graphite 15 Stem ASTM A105 ENP ASTM A182 F316, 410 16 Stem Bushing ASTM A105 ENP ASTM A182 F316, 410 17 Key ASTM A105 ASTM A182 F316, 410 18 Stem O-ring NBR/Viton 19 Lever Carbon Steel 20 Fire Gasket 304SS + Graphite 316SS + Graphite 21 Body O-ring NBR, Viton 22 Body Nut ASTM A194 2H ASTM A194 8 ASTM A194 7M 23 Body Stud ASTM A193 B7 ASTM A193 B8 ASTM A320 L7M 24 Drain Carbon Steel Stainless Steel 25 Trunnion ASTM A105 ENP ASTM A182 F316, 410 ASTM A350-LF2 ENP 26 Trunnion Gasket 304SS + Graphite 27 Trunnion Bushing ASTM A105 ENP ASTM A182 F316, 410 ASTM A350-LF2 ENP 28 Trunnion O-ring NBR, Viton 29 Trunnion Plate Carbon Steel 30 Hex Head Screw Carbon Steel Stainless Steel 31 Snapring Flexible Graphite 32 Stop Plate Carbon Steel 33 Stop Screw Stainless Steel 34 Hex Head Screw Stainless Steel Note: Additional materials available upon request 86

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF CLASS 150-2-piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF H1 W1 W2 WEIGHTS LBS/KG IN 2* 2 7 4.9 10.4 / 26 MM 50 50 178 124 265 / 12 IN 3* 3 8 6 11.2 / 48 MM 80 80 203 152 285 / 22 IN 4* 4 9 6.9 11.2 / 77 MM 100 100 229 175 285 / 35 IN 6 6 15.5 13 / 11.8 163 MM 150 150 394 329 / 300 74 IN 8 8 18 15.7 / 11.8 451 MM 200 200 457 398 / 300 205 IN 10 10 21 19.5 / 11.8 708 MM 250 250 533 495 / 300 322 IN 12 12 24 22.8 / 19.7 1012 MM 300 300 610 580 / 500 460 IN 14 13.25 27 24.6 / 23.6 1267 MM 350 337 686 625 / 600 576 IN 16 15.25 30 26.4 / 23.6 1901 MM 400 387 762 670 / 600 864 IN 18 17.25 34 27.5 / 23.6 2816 MM 450 438 864 698 / 600 1280 IN 20 19.25 36 33 / 23.6 3520 MM 500 489 914 840 / 600 1600 IN 24 23.25 42 41.3 / 31.5 7788 MM 600 591 1067 1050 / 800 3540 87

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF CLASS 150-2-piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* 3 2 8 4.9 10.4 / 37 MM 51 76 51 203 124 265 / 17 IN 4 x 3* 4 3 9 6 11.2 / 62 MM 76 102 76 229 152 285 / 28 IN 6 x 4 6 4 15.5 6.9 / 11.2 130 MM 102 152 102 394 175 / 285 59 IN 8 x 6 8 6 18 13 / 11.8 361 MM 152 203 152 457 329 / 300 164 IN 10 x 8 10 8 21 15.7 / 11.8 568 MM 203 254 203 533 398 / 300 258 IN 12 x 10 12 10 24 19.5 / 11.8 810 MM 254 305 254 610 495 / 300 368 IN 14 x 12 13.25 12 27 22.8 / 19.7 1085 MM 305 337 305 686 580 / 500 493 IN 16 x 14 15.25 13.25 30 24.6 / 23.6 1520 MM 356 387 337 762 625 / 600 691 IN 18 x 16 17.25 15.25 34 26.4 / 23.6 2253 MM 406 438 387 864 670 / 600 1024 IN 20 x 18 19.25 17.25 36 27.5 / 23.6 3168 MM 457 489 438 914 698 / 600 1440 IN 24 x 20 23.25 19.25 42 33 / 23.6 3960 MM 508 591 489 1067 840 / 600 1800 88

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF CLASS 300-2-piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF H1 W1 W2 WEIGHTS LBS/KG IN 2* 2 8.5 4.9 10.4 / 33 MM 50 50 216 124 265 / 15 IN 3* 3 11.14 6 15.7 / 66 MM 80 80 283 152 400 / 30 IN 4* 4 12 6.9 29.5 / 121 MM 100 100 305 175 750 / 55 IN 6 6 15.87 13 / 11.8 260 MM 150 150 403 329 / 300 118 IN 8 8 19.76 15.7 / 11.8 561 MM 200 200 502 398 / 300 255 IN 10 10 22.36 19.5 / 15.7 814 MM 250 250 568 495 / 400 370 IN 12 12 25.51 22.8 / 19.7 1173 MM 300 300 648 580 / 500 533 IN 14 13.25 30 24.6 / 23.6 1408 MM 350 337 762 625 / 600 640 IN 16 15.25 33 26.4 / 23.6 2266 MM 400 387 838 670 / 600 1030 IN 18 17.25 36 27.5 / 23.6 2816 MM 450 438 914 698 / 600 1280 IN 20 19.25 39 33 / 23.6 4620 MM 500 489 991 840 / 600 2100 IN 24 23.25 45 41.3 / 31.5 9240 MM 600 591 1143 1050 / 800 4200 89

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF CLASS 300-2-piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* 3 2 11.14 4.9 10.4 / 44 MM 51 76 51 283 124 265 / 20 IN 4 x 3* 4 3 12 6 15.7 / 97 MM 76 102 76 305 152 400 / 44 IN 6 x 4 6 4 15.87 6.9 / 29.5 224 MM 102 152 102 403 175 / 750 102 IN 8 x 6 8 6 19.76 13 / 11.8 361 MM 152 203 152 502 329 / 300 164 IN 10 x 8 10 8 22.36 15.7 / 11.8 651 MM 203 254 203 568 398 / 300 296 IN 12 x 10 12 10 25.51 19.5 / 15.7 1790 MM 254 305 254 648 495 / 400 465 IN 14 x 12 13.25 12 30 22.8 / 19.7 1272 MM 305 337 305 762 580 / 500 578 IN 16 x 14 15.25 13.25 33 24.6 / 23.6 1826 MM 356 387 337 838 625 / 600 830 IN 18 x 16 17.25 15.25 36 26.4 / 23.6 2376 MM 406 438 387 914 670 / 600 1080 IN 20 x 18 19.25 17.25 39 27.5 / 23.6 3956 MM 457 489 438 991 698 / 600 1798 IN 24 x 20 23.25 19.25 45 33 / 23.6 5720 MM 508 591 489 1143 840 / 600 2600 90

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ CLASS 600-2-piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ H1 W1 W2 WEIGHTS LBS/KG IN 2* 2 11.5 11.625 4.3 15.7 / 77 MM 50 50 292 295 108 400 / 35 IN 3* 3 14 14.125 7.75 29.5 / 121 MM 80 80 356 359 197 750 / 55 IN 4* 4 17 17.125 9.25 39.4 / 224 MM 100 100 432 435 235 1000 / 102 IN 6 6 22 22.125 11.8 / 11.8 510 MM 150 150 559 562 300 / 300 232 IN 8 8 26 26.125 14.6 / 11.8 858 MM 200 200 660 664 371 / 300 390 IN 10 10 31 31.125 16.3 / 11.8 1562 MM 250 250 787 791 415 / 300 710 IN 12 12 33 33.125 20 / 19.7 2112 MM 300 300 838 841 512 / 500 960 IN 14 13.25 35 35.125 21.7 / 23.6 2640 MM 350 337 889 892 550 / 600 1200 IN 16 15.25 39 39.125 24.2 / 23.6 3359 MM 400 387 991 994 615 / 600 1200 IN 18 17.25 43 43.125 27.5 / 23.6 4613 MM 450 438 1092 1095 698 / 600 1527 IN 20 19.25 47 47.25 31.9 / 23.6 5808 MM 500 489 1194 1200 810 / 600 2097 IN 24 23.25 55 55.325 39.8 / 31.5 10428 MM 600 591 1397 1405 1010 / 800 4740 91

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ CLASS 600-2-piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* 3 2 14 14.125 4.3 15.7 / 86 MM 51 76 51 356 359 108 400 / 39 IN 4 x 3* 4 3 17 17.125 7.75 29.5 / 158 MM 76 102 76 432 435 197 750 / 72 IN 6 x 4 6 4 22 22.125 9.25 / 39.4 356 MM 102 152 102 559 562 235 / 1000 162 IN 8 x 6 8 6 26 26.125 11.8 / 11.8 638 MM 152 203 152 660 664 300 / 300 290 IN 10 x 8 10 8 31 31.125 14.6 / 11.8 1203 MM 203 254 203 787 791 371 / 300 547 IN 12 x 10 12 10 33 33.125 16.3 / 11.8 1782 MM 254 305 254 838 841 415 / 300 810 IN 14 x 12 13.25 12 35 35.125 20 / 19.7 2508 MM 305 337 305 889 892 512 / 500 1140 IN 16 x 14 15.25 13.25 39 39.125 21.7 / 23.6 2878 MM 356 387 337 991 994 550 / 600 1308 IN 18 x 16 17.25 15.25 43 43.125 24.2 / 23.6 3700 MM 406 438 387 1092 1095 615 / 600 1682 IN 20 x 18 19.25 17.25 47 47.25 27.5 / 23.6 5229 MM 457 489 438 1194 1200 698 / 600 2377 IN 24 x 20 23.25 19.25 55 55.325 31.9 / 23.6 6820 MM 508 591 489 1397 1405 810 / 600 3100 92

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ A - WE CLASS 900-2-piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 3* 3 15 15.125 15 5.51 11.81 / 121 MM 80 76 381 384 381 140 300 / 55 IN 4 4 17.99 18.125 17.99 6.37 / 16.33 310 MM 100 102 457 460 457 162 / 415 141 IN 6 6 24.01 24.125 24.01 8.38 / 18.77 715 MM 150 152 610 613 610 213 / 477 325 93

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ A - WE CLASS 900-2-piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 3x2* 3 2 15 15.125 15 5.51 11.81 / 121 MM 50 76 51 381 384 381 140 300 / 55 IN 4x3 4 3 17.99 18.125 17.99 6.37 / 16.33 310 MM 80 102 76 457 460 457 162 / 415 141 IN 6x4 6 4 24.01 24.125 24.01 8.38 / 18.77 715 MM 100 152 102 610 613 610 213 / 477 325 94

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ A - WE CLASS 1500-2-piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 2* 2 14.5 14.625 14.5 4.44 12.59 / 147 MM 50 51 368 372 368 113 320 / 67 IN 3* 3 18.5 18.625 18.5 5.43 15.15 / 286 MM 80 76 381 384 381 138 385 / 130 IN 4 4 21.5 21.625 21.5 6.73 / 16.33 422 MM 100 102 457 460 457 171 / 415 192 IN 6 6 27.75 28 27.75 8.74 / 22.99 1045 MM 150 152 610 613 610 222 / 584 475 95

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ A - WE CLASS 1500-2-piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 2x1.5* 2 1.5 14.5 14.625 14.5 4.44 12.59 / 147 MM 50 51 38 368 372 368 113 320 / 67 IN 3x2* 3 2 18.5 18.625 18.5 5.43 15.15 / 286 MM 80 76 51 381 384 381 138 385 / 130 IN 4x3 4 3 21.5 21.625 21.5 6.73 / 16.33 422 MM 100 102 76 457 460 457 171 / 415 192 IN 6x4 6 4 27.75 28 27.75 8.74 / 22.99 1045 MM 150 152 102 610 613 610 222 / 584 475 96

CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves Full & Reduced Port Flow Coefficients Cv Values & Opening Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size 150 300 600 900 1500 2 500 460 400 / 330 3 x 2 180 195 180 187 187 3 1350 1150 1050 935 830 4 x 3 545 535 550 510 510 4 2500 2200 1850 1760 1660 6 x 4 790 765 745 740 740 6 5300 5290 4460 4405 4100 8 x 6 1945 1945 2220 / / 8 10500 9600 8730 / / 10 x 8 4050 4040 4065 / / 10 17500 16750 14250 / / 12 26300 25500 22550 / / 14 31850 30050 28400 / / 16 43300 41700 38150 / / 18 57300 55370 50950 / / 20 74500 72300 65600 / / 22 92600 88420 80279 / / 24 112300 109150 98150 / / Opening Torques for Soft Seats The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size ISO5211 150 300 600 1500 Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port.5 5 5 7 7 13 / 26 F03/F04.75 7 7 12 12 18 / 37 1 12 12 18 18 30 / 74 F05/F06 1.5 26 26 37 37 67 / 133 2 37 37 52 52 81 / 199 F10 2.5 59 59 74 74 122 / / 3 89 89 118 118 221 221 / 4 F10/F12 133 133 207 207 443 443 / 6 177 177 738 738 1438 1438 / 8 F14 708 708 1549 1549 / / / 10 F16 1328 1328 2508 2508 / / / Notes 1 Torques may change with different mediums and trim materials. 2 All valves are at normal temperature with PTFE seats for Class 150 and 300 lbs. Nylon seats for class 600 through 1500. 3 All torques are at maximum differential. Safety factor not included. 97

3-Piece Trunnion Ball Valves - API 6A Carbon, Alloy, & Stainless Steel Sizes 2-1/16 thru 13-5/8 Pressure 2000, 3000, 5000 Design and Manufacturing Standards Basic Design API 6A Shell Wall Thickness API 6A Face to Face Dimension API 6A Flange End Dimension API 6A Inspection & Testing API 6A Fire Safe Design API 6FA/BS 6755 98

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API6A Pressure 2000, 3000, 5000 Model I 19 15 32 31 3 34 30 7-1 7-2 18 5 6 4 28 13 14 29 2 22 1 35 24 23 Model E 19 15 22 26 9 27 21 26 25 11 10 12 8 17 23 24 3 32 37 38 25 33 18 36 34 27 25 5 6 4 13 28 14 29 2 35 1 30 31 16 20 7 24 23 27 25 99

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API6A Pressure 2000, 3000, 5000 Bill of Materials No Name Of Part Materials 1 Body 4130 A182, F316 2 Closure 4130 A182, F316, A351, CF8M 3 Stem AISI 1045 ENP, AISI 4140 ENP AISI 4140 ENP 316 SS, 17-4 PHSS 4 Seat Ring A105 ENP, A106 ENP A350, LF2 ENP 316 SS 5 Ball A105 ENP A350, LF2 ENP A182F316, A351, CF8M 6 Seat Insert Nylon, PEEK 7 Trunnion AIS1 1045, AISI 4140 316 SS, 410 7-1 Trunnion Block AIS1 1045, AISI 4140 316 SS, 410 7-2 Trunnion Block Pin AISI 410 316 SS, 410 8 Gland AIS1 1045 316 SS, 410 9 Adapter Plate AIS1 1045 316 SS, 410 10 Stem O-ring/ Lipseal Viton Viton GLT Viton 11 Stem O-ring Viton Viton GLT Viton 12 Gland O-ring Viton Viton GLT Viton 13 Seat O-ring/Lipseal Viton Viton GLT Viton 14 Seat Subseal Viton, Graphite Viton GLT, Graphite Viton, Graphite 15 Closure O-ring Viton Viton GLT Viton 16 Trunnion O-ring Viton Viton GLT Viton 17 Backup Ring Nylon 18 Gland Seal Graphite Seal 19 Body Seal Graphite Seal 20 Trunnion Seal Graphite Seal 21 Stem Packing Graphite 22 Seat Spring Inconel X-750, 17-4 PHSS 23 Bearing PTFE, Carbon Steel PTFE, 316SS 24 Thrust Washer PTFE, Carbon Steel PTFE, 316SS 25 Sealant Fitting Carbon Steel, SS Ball Check 316SS, SS Ball Check 26 Socket Bolt A574 316 SS 27 Hex/Socket Bolt A574 316 SS 28 Stud Bolt A193 B7M A320 L7M A193 B8 29 Hex Nut A194 2HM A194 7M A194 8 30 Grounding Pin Stainless Steel 31 Grounding Spring Stainless Steel 32 Key Carbon Steel Stainless Steel 33 Dowel Pin Carbon Steel Stainless Steel 34 Relief Plug Carbon Steel Stainless Steel 35 Drain Plug Carbon Steel Stainless Steel 36 Mounting Plate Carbon Steel Stainless Steel 37 Gear Operator Ductile Iron Case, Carbon Steel Worm Gear 38 Hand Wheel Carbon Steel, Ductile Iron Note: Materials also available in F321, F347, F51, F53, monel, inconel, incolloy and hastelloy. Metal-to-metal seated ball valve designs are available upon request. Note: Additional materials available upon request 100

3-Piece Trunnion Ball Valves - API 6A Design Features and Applications CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A SCV s standard ball valves have been designed to API s highest standards. Complete Split body & Fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance. SCV is supplying its products to the Crude oil transport and processing, Power engineering, Water supply systems and Process Industries throughout the world. Seal Feature SCV ball valves are produced with spring-loaded seats. This spring load keeps the seat in contact with the ball even in absence of line pressure and makes very efficient seal at low line pressure.as line pressure increases, the seat area creates a piston effect which forces the seat against the ball, therefore a tight seal becomes effective. If the pressure is higher, the force exerted by the seat on the ball is increased by action of the pipeline pressure. Therefore, the higher the line pressure, the greater the piston action. Ball Seat Insert (Metal) Seat Insert (Metal) Graphite Gasket Graphite Gasket Before Fire Figure 1 Self Lubrication Self lubrication, low friction PTFE is used for trunnion and stem bearings. NYLON or other low friction materials are used for seat inserts. Self lubricating seals and stem bearing give predictable operating torque for the life of the valve. Fire Safe Construction with Secondary Metal Seat SCV s ball valves have been fire tested and can be supplied to API 6FA and API 607. The soft seat inserts, irrespective of their materials, will possibly fail when subjected to sudden high temperature conditions. SCV provides a fire-safe design which may substantially prevent leakages through seals when damaged by high temperature. The function of the seats before and after the fire test is shown on the sketches. If the seat inserts are destroyed or burned out, a metal to metal seal is formed between the lower diameter of the seat and ball, while the seat to body seals, the stem packing and the end connections to body seals are designed to resist high temperature and will remain undamaged. (Figures 1 & 2) Ball After Fire Figure 2 Figure 3 Trunnion Mounting Trunnion mounted stems absorb the thrust from line pressure, preventing excess friction between the ball and seats, so even at full rated working pressure, operating torque stays low. (Figure 3) Body Body Vent and Drain The body cavity may be vented in both open and closed state. (Figure 4) Ball Figure 4 101

3-Piece Trunnion Ball Valves - API 6A Design Features and Applications CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A Double Block and Bleed The seats are of both-side-sealing type, which means that they seal both on the upstream or downstream side of the ball valve and inside the valve. Whether in the open or closed position, pressure on each side of the ball is blocked from the body cavity by the seat rings engineered to self relieve. No pressure build up can occur in to body cavity. The body cavity can then be vented to the atmosphere or drained through the body port. (Figure 5) Sealant Fitting Sealant lubrication fittings come as a standard with SCV s design. In the event of seat insert or stem seal damage, external or internal leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant seal around the stem or between the seat and the ball until such time the valve may be properly serviced. (Figures 6, 7 & 8) Antistatic Device The springs provided at the stem allow the static charges to be led to the piping. In this way, an electrostatic charging of the ball is eliminated. (Figure 9) Stem Seal with Blow Out Proof Stem The stem is independent of the ball and is a blow-out proof design. As an integral part, a stem has a flange at its lower side. The stem flange prevents the stem from blowingout. This feature also allows replacement of stem packing while the valve is under pressure.the torque is transmitted to the ball by a generously proportioned mating joint, hence the stem is not affected by the side thrust. Upstream Execution for 2 thru 4 Body Ball Figure 6 Execution for all Sizes Downstream Figure 5 Execution for 4 and Larger Figure 7 Body Adapter Ball Bonnet Figure 8 Body Bonnet Body Stem Ball Figure 9 102

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure 2000-3-piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/16 2.09 1 1.625 4.44 6.50 8.90 68 IN 2-9/16 2.59 14.125 5.22 7.28 9.68 79 IN 3-1/8 3.22 14.125 5.56 8.69 11.09 119 IN 4-1/16 4.28 17.125 6.50 9.56 11.96 218 IN 7-1/16 5.16 22.125 8.69 12.19 14.59 598 IN 9 7.16 26.125 9.47 13.29 15.59 697 IN 11 11.03 31.125 12.13 16.63 19.78 1696 IN 13-5/8 13.66 33.125 13.88 18.69 21.84 2193 103

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure 3000-3-piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/16 2.09 14.625 4.44 7.28 10.90 119 IN 2-9/16 2.59 15.125 5.22 8.06 11.64 139 IN 3-1/8 3.22 15.125 5.56 9.47 13.05 178 IN 4-1/16 4.28 18.125 6.50 10.34 13.92 319 IN 7-1/16 5.16 24.125 8.69 12.97 16.55 697 IN 9 7.16 29.125 10.38 15.58 19.10 1547 IN 11 11.03 33.125 12.13 17.41 21.74 1846 IN 13-5/8 13.66 38.125 13.88 19.47 23.80 2593 104

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure 5000-3-piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/16 2.09 14.625 6.50 4.44 8.90 119 IN 2-9/16 2.59 18.625 7.28 5.22 9.68 170 IN 3-1/8 3.22 18.625 8.69 5.56 11.09 240 IN 4-1/16 4.28 21.625 9.56 6.50 11.96 420 IN 7-1/16 5.16 28.00 12.19 8.69 14.59 1190 IN 9 7.16 33.125 14.80 10.38 17.20 1936 IN 11 11.03 39.375 16.63 12.13 19.78 3420 IN 13-5/8 13.66 45.125 18.69 13.88 21.84 5120 105

CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API 6A Flow Coefficients Cv Values & Operating Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Pressure PSI Size 2000 3000 5000 IN 2-1/16 GPM 350 320 320 IN 2-9/16 GPM 190 185 180 IN 3-1/8 GPM 1,000 910 820 IN 4-1/16 GPM 1,850 1,760 1,610 IN 7-1/16 GPM 4,400 4,300 4,080 IN 9 GPM 8,450 8,400 7,980 IN 11 GPM 14,250 14,160 13,020 IN 13-5/8 GPM 22,790 21,230 16,910 Operating Torques The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Pressure PSI Size 2000 3000 5000 IN 2-1/16 Ft. Lbs. 1,413 1,843 5,749 IN 2-9/16 Ft. Lbs. 1,413 1,843 5,749 IN 3-1/8 Ft. Lbs. 4,103 5,405 9,951 IN 4-1/16 Ft. Lbs. 5,651 10,196 18,427 IN 7-1/16 Ft. Lbs. 12,284 23,095 46,068 IN 9 Ft. Lbs. 24,569 44,224 67,566 IN 11 Ft. Lbs. 43,979 64,864 92,871 IN 13-5/8 Ft. Lbs. 66,216 90,661 120,388 1 Torques may change with different mediums and trim materials. 2 All torques are at maximum differential. Safety factor not included. Notes 106

3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Carbon & Stainless Steel Sizes 1-48 Class 150-2500 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI/AMSE B16.5 (1/2 to 24 ) AMSI/ASMEB16.47 (26 & up) Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS 6755 107

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class 150-2500 Bolted Body Construction Model I 19 15 32 31 3 34 30 7-1 7-2 18 5 6 4 28 13 14 29 2 22 1 35 24 23 Model E 19 15 22 26 9 27 21 26 25 11 10 12 8 17 23 24 3 32 37 38 25 33 18 36 34 27 25 5 6 4 13 28 14 29 2 35 1 30 31 16 20 7 24 23 27 25 108

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class 150-2500 Welded Body Construction Model I 19 15 32 31 3 34 30 7-1 7-2 18 5 6 4 13 14 2 22 1 35 24 23 Model E 19 15 22 26 9 27 21 26 25 11 10 12 8 17 23 24 3 32 37 38 25 33 18 36 34 27 25 5 6 4 13 14 2 35 1 30 31 16 20 7 24 23 27 25 109

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class 150-2500 Bill of Materials No Name Of Part Materials 1 Body A105, A350 LF2 A350 LF2 A182, F316 2 Closure A105, A350 LF2 A350 LF2 A182 F316, A351, CF8M 3 Stem A105 ENP A350 LF2 316 SS, 17-4 PHSS, 410 4 Seat Ring A105 ENP, A106 ENP A350 LF2 ENP 316 SS, 410 5 Ball A105 ENP A350 LF2 ENP A182F316, A351, CF8M, 410 6 Seat Insert Nylon, PTFE, PEEK 7 Trunnion AIS1 1045, AISI 4140 316 SS, 410 7-1 Trunnion Block AIS1 1045, AISI 4140 316 SS, 410 7-2 Trunnion Block Pin AISI 410 316 SS, 410 8 Gland AIS1 1045 316 SS, 410 9 Adapter Plate AIS1 1045 316 SS, 410 10 Stem O-ring/ Lipseal Viton Viton GLT Viton 11 Stem O-ring Viton Viton GLT Viton 12 Gland O-ring Viton Viton GLT Viton 13 Seat O-ring/Lipseal Viton Viton GLT Viton 14 Seat Subseal Viton, Graphite Viton GLT, Graphite Viton, Graphite 15 Closure O-ring Viton Viton GLT Viton 16 Trunnion O-ring Viton Viton GLT Viton 17 Backup Ring PTFE, Nylon 18 Gland Seal Spiral Wound Gasket 316SS + Graphite 19 Body Seal Spiral Wound Gasket 316SS + Graphite 20 Trunnion Seal Spiral Wound Gasket 316SS + Graphite 21 Stem Packing Graphite 22 Seat Spring Inconel X-750, 17-4 PHSS 23 Bearing PTFE, Carbon Steel PTFE, 316SS 24 Thrust Washer PTFE, Carbon Steel PTFE, 316SS 25 Sealant Fitting Carbon Steel, SS Ball Check 316SS, SS Ball Check 26 Socket Bolt A574 316 SS 27 Hex/Socket Bolt A574 316 SS 28 Stud Bolt A193 B7M A320 L7M A193 B8 29 Hex Nut A1942HM A194 7M A194 8 30 Grounding Pin Stainless Steel 31 Grounding Spring Stainless Steel 32 Key Carbon Steel Stainless Steel 33 Dowel Pin Carbon Steel Stainless Steel 34 Relief Plug Carbon Steel Stainless Steel 35 Drain Plug Carbon Steel Stainless Steel 36 Mounting Plate Carbon Steel Stainless Steel 37 Gear Operator Ductile Iron Case, Carbon Steel Worm Gear 38 Hand Wheel Carbon Steel, Ductile Iron Note: Materials also available in F321, F347, F51, F53, monel, inconel, incolloy and hastelloy. Metal-to-metal seated ball valve designs are available upon request. Note: Additional materials available upon request 110

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Design Features and Applications SCV s standard ball valves have been designed to API s highest standards. Complete Split body & Fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance. SCV is supplying its products to the Crude oil transport and processing, Power engineering, Water supply systems and Process Industries throughout the world. Seal Feature SCV ball valves are produced with spring-loaded seats. This spring load keeps the seat in contact with the ball even in absence of line pressure and makes very efficient seal at low line pressure.as line pressure increases, the seat area creates a piston effect which forces the seat against the ball, therefore a tight seal becomes effective. If the pressure is higher, the force exerted by the seat on the ball is increased by action of the pipeline pressure. Therefore, the higher the line pressure, the greater the piston action.seats are available in PTFE, R-PTFE, NYLON or others upon request. Ball Seat Insert (Metal) Seat Insert (Metal) Graphite Gasket Graphite Gasket Before Fire Figure 1 Self Lubrication Self lubrication, low friction PTFE is used for stem bearings, stem seals, and body seats. NYLON or other low friction materials are used for seat inserts. Self lubricating seals and stem bearing give predictable operating torque for the life of the valve. Ball After Fire Figure 2 Fire Safe Construction with Secondary Metal Seat SCV s ball valves have been fire tested and can be supplied to API 6FA and API 607. The soft seat inserts, irrespective of their materials, will possibly fail when subjected to sudden high temperature conditions. SCV provides a fire-safe design which may substantially prevent leakages through seals when damaged by high temperature. The function of the seats before and after the fire test is shown on the sketches. If the seat inserts are destroyed or burned out, a metal to metal seal is formed between the lower diameter of the seat and ball, while the seat to body seals, the stem packing and the end connections to body seals are designed to resist high temperature and will remain undamaged. (Figures 1 & 2) Figure 3 Trunnion Mounting Trunnion mounted stems absorb the thrust from line pressure, preventing excess friction between the ball and seats, so even at full rated working pressure, operating torque stays low. (Figure 3) Body Ball Body Vent and Drain The body cavity may be vented in both open and closed state. (Figure 4) Figure 4 111

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Design Features and Applications Double Block and Bleed The seats are of both-side-sealing type, which means that they seal both on the upstream or downstream side of the ball valve and inside the valve. Whether in the open or closed position, pressure on each side of the ball is blocked from the body cavity by the seat rings engineered to self relieve. No pressure build up can occur in to body cavity. The body cavity can then be vented to the atmosphere or drained through the body port. (Figure 5) Sealant Fitting Sealant lubrication fittings come as a standard with SCV s design. In the event of seat insert or stem seal damage, external or internal leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant seal around the stem or between the seat and the ball until such time the valve may be properly serviced. (Figures 6, 7 & 8) Antistatic Device The springs provided at the stem allow the static charges to be led to the piping. In this way, an electrostatic charging of the ball is eliminated. (Figure 9) Stem Seal with Blow Out Proof Stem The stem is independent of the ball and is a blow-out proof design. As an integral part, a stem has a flange at its lower side. The stem flange prevents the stem from blowingout. This feature also allows replacement of stem packing while the valve is under pressure.the torque is transmitted to the ball by a generously proportioned mating joint, hence the stem is not affected by the side thrust. Upstream Execution for 2 thru 4 Body Ball Figure 6 Execution for all Sizes Downstream Figure 5 Execution for 4 and Larger Figure 7 Body Adapter Ball Bonnet Figure 8 Body Bonnet Body Stem Ball Figure 9 112

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 150-3-piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* 2.00 7.00 7.50 8.50 4.44 6.50 8.90 39.6 28.6 MM 50 x 50 51 178 191 216 113 165 226 18 13 IN 3 x 3* 3.00 8.00 8.50 11.125 5.56 8.69 11.09 68.2 52.8 MM 80 x 80 76 203 216 283 141 221 282 31 24 IN 4 x 4* 4.00 9.00 9.50 12.00 6.50 9.56 11.96 118.8 94.6 MM 100 x 100 102 229 241 305 165 243 304 54 43 IN 6 x 6 6.00 15.50 16.50 18.00 8.69 12.19 14.59 497.2 398.2 MM 150 x 150 152 394 419 547 221 310 371 226 181 IN 8 x 8 8.00 18.00 18.50 20.50 10.38 14.80 17.20 748 646.8 MM 200 x 200 203 457 470 521 264 376 437 340 294 IN 10 x 10 10.00 21.00 21.50 22.00 12.13 16.63 19.78 1196.8 1047.2 MM 250 x 250 254 533 546 559 308 422 502 544 476 IN 12 x 12 12.00 24.00 24.50 25.00 13.88 18.69 21.84 1696.2 1546.6 MM 300 x 300 305 610 622 635 353 475 555 771 703 IN 14 x 14 13.25 27.00 27.50 30.00 15.50 21.00 24.15 2343 2145 MM 350 x 350 337 686 699 762 394 533 613 1065 975 IN 16 x 16 15.25 30.00 30.50 33.00 17.19 22.75 26.75 3042.6 2743.4 MM 400 x 400 387 762 775 838 437 578 680 1383 1247 IN 18 x 18 17.25 34.00 34.50 38.00 18.75 25.75 29.80 4389 3940.2 MM 450 x 450 438 864 876 965 476 654 757 1995 1791 IN 20 x 20 19.25 36.00 36.50 39.00 20.50 27.05 32.50 5288.8 4789.4 MM 500 x 500 489 914 927 991 521 687 826 2404 2177 IN 24 x 24 23.25 42.00 42.50 45.00 24.38 32.80 36.67 8681.2 7933.2 MM 600 x 600 591 1067 10080 1143 619 833 931 3946 3606 IN 26 x 26 25.00 45.00 45.50 49.00 34.83 50.00 55.91 10476.4 9429.2 MM 650 x 650 635 1143 1156 1247 885 1270 1420 4762 4286 IN 28 x 28 27.00 49.00 49.50 53.00 36.40 52.45 58.36 11974.6 10775.6 MM 700 x 700 686 1247 1257 1346 925 1332 1482 5443 4898 IN 30 x 30 29.00 51.00 51.50 55.00 38.77 55.75 61.95 14966.6 13470.6 MM 800 x 800 737 1295 1308 1397 985 1416 1574 6803 6123 IN 36 x 36 34.50 60.00 60.50 68.00 44.54 63.90 70.10 24945.8 22451 MM 900 x 900 876 1524 1537 1727 1131 1623 1781 11339 10205 IN 42 x 42 34.50 60.00 60.50 68.00 44.54 63.90 70.10 24945.8 22451 MM 1050 x 1050 876 1524 1537 1727 1131 1623 1781 11339 10205 IN 48 x 48 34.50 60.00 60.50 68.00 44.54 63.90 70.10 24945.8 22451 MM 1200 x 1200 876 1524 1537 1727 1131 1623 1781 11339 10205 113

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 150-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 8.00 8.50 11.125 5.22 7.28 9.68 48.4 33 MM 80 x 50 51 203 216 283 133 185 246 22 15 IN 4 x 3* 3.00 9.00 9.50 12.00 6.34 9.47 11.87 88 74.8 MM 100 x 80 76 229 241 305 161 241 301 40 34 IN 6 x 4* 4.00 15.50 16.00 18.00 7.28 10.34 12.74 149.9 118.8 MM 150 x 100 102 394 406 457 185 263 324 68 54 IN 8 x 6 6.00 18.00 18.50 20.50 9.47 13.29 15.59 598.4 497.2 MM 200 x 150 152 457 470 521 541 338 396 272 226 IN 10 x 8 8.00 21.00 21.50 22.00 11.16 15.90 18.30 847 748 MM 250 x 200 203 533 546 559 283 404 465 385 340 IN 12 x 10 10.00 24.00 24.50 25.00 13.23 17.84 20.98 1496 1346.4 MM 300 x 250 254 610 622 635 336 453 533 680 612 IN 14 x 12 12.00 27.00 27.50 30.00 14.98 20.00 23.04 1845.8 1645.6 MM 350 x 300 305 686 699 762 380 508 585 839 748 IN 16 x 14 13.25 30.00 30.50 33.00 16.60 22.30 25.45 2593.8 2343 MM 400 x 350 337 762 775 838 422 566 646 1179 1065 IN 18 x 16 15.25 34.00 34.50 38.00 18.39 24.05 28.05 3440.8 3093.2 MM 450 x 400 387 864 876 965 467 611 712 1564 1406 IN 20 x 18 17.25 36.00 36.50 39.00 20.05 27.05 31.10 7139 4439.6 MM 500 x 450 438 914 927 991 509 687 790 3245 2018 IN 24 x 20 19.25 42.00 42.50 45.00 21.90 28.80 33.90 5588 5137 MM 600 x 500 489 1067 1079 1143 556 732 861 2540 2335 IN 30 X 24 23.25 50.98 / 55 21.06 / 26.1 7562 6731 MM 600 x 591 1295 / 1397 535 / 663 3430 3053 IN 36 X 30 28.97 60.00 / 68.03 27.75 / 30.59 14220 12655 MM 900 x 800 736 1524 / 1728 705 / 777 6450 5740 IN 42 X 36 34.48 73.03 / 82.00 37.00 / 43.03 30820 27430 MM 1050 x 900 876 1855 / 2083 940 / 1093 13980 12442 IN 48 X 42 40.23 84.01 / 94.01 41.85 / 47.91 43982 39143 MM 1200 x 1050 1022 2134 / 2388 1063 / 1217 19950 17755 114

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 300-3-piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* 2.00 8.50 9.125 8.50 4.44 6.50 8.90 59.40 44 MM 50 x 50 51 216 232 216 113 165 226 27 20 IN 3 x 3* 3.00 11.125 11.75 11.125 5.56 8.69 11.09 99 79.2 MM 80 x 80 76 283 299 283 141 221 282 45 36 IN 4 x 4* 4.00 12.00 12.625 12.00 6.50 9.56 11.96 158.4 134.2 MM 100 x 100 102 305 321 305 165 243 304 72 61 IN 6 x 6 6.00 15.875 16.50 18.00 8.69 12.19 14.59 547.8 468.6 MM 150 x 150 152 403 419 437 221 310 371 249 213 IN 8 x 8 8.00 19.75 20.375 20.50 10.38 14.80 17.20 847 737 MM 200 x 200 203 502 518 521 264 376 437 385 335 IN 10 x 10 10.00 22.375 23.00 22.00 12.13 16.63 19.78 1245.2 1075.8 MM 250 x 250 254 568 584 559 308 422 502 566 489 IN 12 x 12 12.00 25.50 26.125 25.00 13.88 18.69 21.84 1894.2 1705 MM 300 x 300 305 648 664 635 340 475 555 861 775 IN 14 x 14 13.25 30.00 30.625 30.00 15.50 21.00 24.15 2593.8 2294.6 MM 350 x 350 337 762 778 762 394 533 613 1179 1043 IN 16 x 16 15.25 33.00 33.625 33.00 17.19 22.75 26.75 3440.8 3093.2 MM 400 x 400 387 838 854 838 437 578 679 1564 1406 IN 18 x 18 17.25 36.00 36.625 36.00 18.75 25.75 29.80 4987.4 4490.2 MM 450 x 450 438 914 930 914 476 654 757 2267 2041 IN 20 x 20 19.25 39.00 39.75 39.00 20.50 27.05 32.50 5486.8 4987.4 MM 500 x 500 489 991 1010 991 521 687 826 2494 2267 IN 24 x 24 23.25 45.00 45.875 45.00 24.38 32.80 36.67 9229 8430.4 MM 600 x 600 591 1143 1165 1143 619 833 931 4195 3832 IN 26 x 26 25.00 49.00 50.00 49.00 34.83 50.00 55.91 11675.4 10476.4 MM 650 x 650 635 1245 1270 1245 885 1270 1420 5307 4762 IN 28 x 28 27.00 53.00 54.00 53.00 36.40 52.45 58.36 13970 12573 MM 700 x 700 686 1346 1372 1346 925 1332 1482 6350 5715 IN 30 x 30 29.00 55.00 56.00 55.00 38.77 55.75 61.95 16964.2 15265.8 MM 800 x 500 737 1397 1422 1397 985 1416 1574 7711 6939 IN 36 x 36 34.50 68.00 69.125 68.00 44.54 63.90 70.10 25944.6 23350.8 MM 900 x 900 876 1727 1756 1727 1727 1623 1781 11793 10614 IN 42 X 42 40.23 82.00 / 82.00 37.36 / 43.26 35935 32701 MM 1050 x 1050 1022 2083 / 2083 949 / 1099 16300 14833 IN 48 X 48 45.98 85.43 / 94.01 42.63 / 53.3 53572 48751 MM 1200 x 1200 1168 2170 / 2388 1083 / 1354 24300 22113 115

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 300-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 11.125 11.75 11.125 5.22 7.28 9.68 68.2 52.8 MM 80 x 50 51 283 299 283 133 185 279 31 24 IN 4 x 3* 3.00 12.00 12.625 12.00 6.34 9.47 11.87 118.8 88 MM 100 x 80 76 305 321 305 161 241 301 54 40 IN 6 x 4 4.00 15.875 16.50 18.00 7.28 10.34 12.74 217.8 178.2 MM 150 x 100 102 403 419 437 185 263 324 99 81 IN 8 x 6 6.00 20.4 20.375 20.50 9.47 13.29 15.59 646.8 558.8 MM 200 x 150 152 518 518 521 241 338 396 294 254 IN 10 x 8 8.00 22.375 23.00 22.00 11.16 15.90 18.30 897.6 776.6 MM 250 x 200 203 568 584 559 283 404 465 408 353 IN 12 x 10 10.00 25.50 26.125 25.00 13.23 17.84 20.98 1645.6 1445.4 MM 300 x 250 254 648 664 635 336 453 533 748 657 IN 14 x 12 12.00 30.00 30.625 30.00 14.98 20.00 23.04 1995.4 1795.2 MM 350 x 300 305 762 778 762 380 508 585 907 816 IN 16 x 14 13.25 33.00 33.625 33.00 16.60 22.30 25.45 2893 2644.4 MM 400 x 350 337 838 854 838 422 566 646 1315 1202 IN 18 x 16 15.25 36.00 36.625 36.00 18.39 24.05 28.05 3940.2 3542 MM 450 x 400 387 914 930 914 467 611 713 1791 1610 IN 20 x 18 17.25 39.00 39.75 39.00 20.05 27.05 31.10 5288.8 4789.4 MM 500 x 450 438 991 1010 991 509 687 790 2404 2177 IN 24 x 20 19.25 45.00 45.875 43.00 21.90 28.80 33.90 5915.8 5337.2 MM 600 x 500 489 1143 1165 1092 556 732 861 2698 2426 IN 30 X 24 23.25 55 55.98 55 23.7 / 26.53 10207 9187 MM 800 x 600 591 1397 1422 1397 602 / 674 4630 4167 IN 36 X 30 28.97 67.99 69.13 67.99 28.3 / 84.09 18365 16345 MM 900 x 800 736 1727 1756 1727 719 / 866 8330 7414 IN 42 X 36 34.48 82 / 82.00 37.36 / 43.26 35935 32701 MM 1050 x 900 876 2083 / 2083 949 / 1099 16300 14833 IN 48 X 42 40.23 85.43 / 94.01 42.63 / 53.3 53572 48751 MM 1200 x 1050 1022 2170 / 2388 1083 / 1354 24300 22113 116

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 600-3-piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* 2.00 11.50 11.625 11.50 4.44 6.50 8.90 68.2 52.8 MM 50 x 50 51 292 295 292 113 165 226 31 24 IN 3 x 3* 3.00 14.00 14.125 14.00 5.56 8.69 11.09 118.8 94.6 MM 80 x 80 76 356 359 356 141 221 282 54 43 IN 4 x 4* 4.00 17.00 17.125 17.00 6.50 9.56 11.96 217.8 178.2 MM 100 x 100 102 432 435 432 165 243 304 99 81 IN 6 x 6 6.00 22.00 22.125 22.00 8.69 12.19 14.59 598.4 497.2 MM 150 x 150 152 559 562 559 221 310 371 272 226 IN 8 x 8 8.00 26.00 26.125 26.00 10.38 14.80 17.20 1196.8 976.8 MM 200 x 200 203 660 664 660 264 376 437 544 444 IN 10 x 10 10.00 31.00 31.125 31.00 12.13 16.63 19.78 1696.2 1375 MM 250 x 250 254 787 791 787 308 422 502 771 625 IN 12 x 12 12.00 33.00 33.125 33.00 13.88 18.69 21.84 2193.4 1775.4 MM 300 x 300 305 838 841 838 353 475 555 997 807 IN 14 x 14 13.25 35.00 35.125 35.00 15.50 21.00 24.15 2943.6 2393.6 MM 350 x 350 337 889 892 889 394 533 613 1338 1088 IN 16 x 16 15.25 39.00 39.125 39.00 17.19 22.75 26.75 4538.6 3740 MM 400 x 400 387 991 994 991 437 578 680 2063 1700 IN 18 x 18 17.25 43.00 43.125 43.00 18.75 25.75 29.80 5876.2 4809.2 MM 450 x 450 438 192 1095 1092 476 654 757 2671 2186 IN 20 x 20 19.25 47.00 47.25 47.00 20.50 27.05 32.50 6635.2 5438.4 MM 500 x 500 489 1194 1200 1194 521 687 826 3016 2472 IN 24 x 24 23.25 55.00 55.325 55.00 24.38 32.38 36.67 11523.6 10227.8 MM 600 x 600 591 1397 1405 1397 619 822 931 5238 4649 IN 26 x 26 25.00 57.00 57.50 57.00 31.74 40.74 45.64 13670.8 11475.2 MM 650 x 650 635 1448 1461 1448 806 1035 1159 6214 5216 IN 28 x 28 27.00 61.00 61.50 61.00 38.85 44.76 50.67 22451 20207 MM 700 x 700 686 1549 1562 1549 987 1137 1287 10205 9185 IN 30 x 30 29.00 65.00 65.50 65.00 42.00 48.20 54.40 23949.2 21553.4 MM 750 x 750 737 1651 1664 1651 1067 1224 1382 10886 9797 IN 36 x 36 34.50 82.00 82.625 82.00 47.34 53.54 59.74 37620 33827 MM 900 x 900 876 2083 2099 2083 1202 1360 1517 17100 15376 IN 42 X 42 40.23 95.94 96.45 95.94 38.46 / 53.3 47598 42362 MM 1050 x 1050 1022 2437 2450 2437 977 / 1354 21590 19215 IN 48 X 48 45.98 100.00 100.51 100.00 43.81 / 61.22 69556 63991 MM 1200 x 1200 1168 2540 2553 2540 1113 / 1555 31550 29026 117

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 600-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 14.00 14.125 14.00 5.22 7.28 9.68 79.2 63.8 MM 80 x 50 51 356 359 356 133 185 279 36 29 IN 4 x 3* 3.00 17.00 17.125 17.00 6.34 9.47 11.87 138.6 114.4 MM 100 x 80 76 432 435 432 161 241 301 63 52 IN 6 x 4 4.00 22.00 22.125 22.00 7.28 10.34 12.74 299.2 248.6 MM 150 x 100 102 559 562 559 185 263 324 136 113 IN 8 x 6 6.00 26.00 26.125 26.00 9.47 13.29 15.59 697.4 578.6 MM 200 x 150 152 660 664 660 241 338 396 317 263 IN 10 x 8 8.00 31.00 31.125 31.00 11.16 15.90 18.30 1346.4 1075.8 MM 250 x 200 203 787 791 787 283 404 465 612 489 IN 12 x 10 10.00 33.00 33.125 33.00 13.23 17.84 20.98 1894.2 1535.6 MM 300 x 250 254 838 841 838 336 453 533 861 698 IN 14 x 12 12.00 35.00 35.125 35.00 14.98 20.00 23.04 2593.8 2145 MM 350 x 300 305 889 892 889 380 508 585 1179 975 IN 16 x 14 13.25 39.00 39.125 39.00 16.60 22.30 25.45 3291.2 2743.4 MM 400 x 350 337 991 994 991 422 566 646 1496 1247 IN 18 x 16 15.25 43.00 43.125 43.00 18.39 24.05 28.05 5088.6 4180 MM 450 x 400 387 1092 1095 1092 467 611 713 2313 1900 IN 20 x 18 17.25 47.00 47.25 47.00 20.05 27.05 31.10 6536.2 5337.2 MM 500 x 450 438 1194 1200 1194 509 687 790 2971 2426 IN 24 x 20 19.25 55.00 55.325 55.00 21.90 28.80 33.90 7383.2 6036.8 MM 600 x 500 489 1397 1405 1397 556 732 861 3356 2744 IN 30 X 24 23.25 65.00 65.51 65.00 24.09 / 29.88 13030 11987 MM 800 x 600 591 1651 1664 1651 612 / 759 5910 5437 IN 36 X 30 28.97 82.00 82.59 82.00 28.58 / 34.92 23281 21186 MM 900 x 800 736 2083 2098 2083 726 / 887 10560 9610 IN 42 X 36 34.48 95.94 96.45 95.94 38.46 / 53.3 47598 42362 MM 1050 x 900 876 2437 2450 2437 977 / 1354 21590 19215 IN 48 X 42 40.23 100.00 100.51 100.00 43.81 / 61.22 69556 63991 MM 1200 x 1050 1022 2540 2553 2540 1113 / 1555 31550 29026 118

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 900-3-piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* 2.00 14.50 14.625 14.50 4.44 7.28 10.90 118.8 94.6 MM 50 x 50 51 368 372 368 113 185 277 54 43 IN 3 x 3* 3.00 15.00 15.125 15.00 5.56 9.47 13.05 178.2 143 MM 80 x 80 76 381 384 381 141 241 332 81 65 IN 4 x 4 4.00 18.00 18.125 18.00 6.50 10.34 13.92 319 224.4 MM 100 x 100 102 457 460 457 165 263 354 145 102 IN 6 x 6 6.00 24.00 24.125 24.00 8.69 12.97 16.55 697.4 558.8 MM 150 x 150 152 610 613 610 221 329 420 317 254 IN 8 x 8 8.00 29.00 29.125 29.00 10.38 15.58 19.10 1546.6 1236 MM 200 x 200 203 737 740 737 264 396 485 703 562 IN 10 x 10 10.00 33.00 33.125 33.00 12.13 17.41 21.74 1846 1476 MM 250 x 250 254 838 841 838 308 442 552 839 671 IN 12 x 12 12.00 38.00 38.125 38.00 13.88 19.47 23.80 2593 2343 MM 300 x 300 305 965 968 965 353 495 605 1315 1065 IN 14 x 14 12.75 40.50 40.875 40.50 15.50 21.78 26.11 3841 3093 MM 350 x 350 337 1029 1038 1029 394 553 663 1746 1406 IN 16 x 16 14.75 44.50 44.875 44.50 17.19 23.53 28.71 4739 3791 MM 400 x 400 387 1130 1140 1130 437 598 729 2154 1723 IN 18 x 18 14.75 48.00 48.50 48.00 18.39 24.83 30.01 5438 4239 MM 450 x 450 438 1219 1232 1219 467 631 762 3197 2562 IN 20 x 20 18.625 52.00 52.50 52.00 20.50 28.30 34.46 10027.6 8032 MM 500 x 500 489 1321 1334 1321 521 719 875 4558 3651 IN 24 x 24 22.50 61.00 61.75 61.00 24.38 33.20 38.63 13372 10727 MM 600 x 600 591 1549 1569 1549 619 843 981 6078 4876 IN 30 x 30 28.11 74.01 74.88 74.01 31.06 / 41.18 27426 24410 MM 750 x 750 714 1880 1902 1880 789 / 1046 12440 11072 IN 36 x 36 33.74 90.01 91.14 90.01 35.43 / 46.1 44423 40426 MM 900 x 900 857 2286 2315 2286 900 / 1171 20150 18337 119

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 900-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 15.00 15.125 15.00 5.22 8.06 11.64 138.6 107.8 MM 80 x 50 51 381 384 381 133 205 296 63 49 IN 4 x 3* 3.00 18.00 18.125 18.00 6.34 10.25 13.84 217.8 173.8 MM 100 x 80 76 457 460 457 161 260 352 99 79 IN 6 x 4 4.00 24.00 24.125 24.00 7.28 11.12 14.70 437.8 347.6 MM 150 x 100 102 610 613 610 185 283 373 199 158 IN 8 x 6 6.00 29.00 29.125 29.00 9.47 14.07 17.65 897.6 717.2 MM 200 x 150 152 737 740 737 241 357 448 408 326 IN 10 x 8 8.00 33.00 33.125 33.00 11.16 16.68 20.26 1595 1276 MM 250 x 200 203 838 841 838 283 424 515 725 580 IN 12 x 10 10.00 38.00 38.125 38.00 13.23 18.62 22.94 2295 1846 MM 300 x 250 254 965 968 965 336 473 583 1043 839 IN 14 x 12 12.00 40.50 40.875 40.50 14.98 20.77 25.00 3392 2743 MM 350 x 300 305 1029 1038 1029 380 528 635 1542 1247 IN 16 x 14 12.75 44.50 44.875 44.50 16.60 23.10 27.41 3991 3192 MM 400 x 350 337 1130 1140 1130 422 587 696 1814 1451 IN 18 x 16 14.75 48.00 48.50 48.00 18.39 24.83 30.01 5438 4239 MM 450 x 400 387 1219 1231 1219 467 631 763 2472 1927 IN 20 x 18 16.75 48.00 48.50 48.00 18.75 26.53 31.75 7031 5636 MM 500 x 450 438 1321 1334 1321 509 674 807 3878 3107 IN 24 x 20 18.625 61.00 61.75 61.00 21.90 29.58 35.86 11436 9130 MM 600 x 500 489 1549 1569 1549 556 751 911 5198 4150 IN 30 X 24 22.48 74.01 74.88 74.01 27.08 / 32.87 18232 16773 MM 750 x 600 571 1880 1902 1880 688 / 835 8270 7608 IN 36 X 30 28.11 90.00 91.14 90.00 35.43 / 46.1 44423 40426 MM 900 x750 714 2286 2315 2286 900 / 1171 20150 18337 IN 42 X 36 33.74 105 106.14 105.00 41.73 / 48.03 52073 47388 MM 1050 x 900 857 2667 2696 2667 1060 / 1220 23620 21495 120

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 1500-3-piece trunnion ball valves - api 6d - full port 121 DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 1 x 1* 1.00 / 10.0 / 3.15 5.90 7.64 70 / MM 25 x 25 25 / 254 / 80 150 194 26 / IN 1.5 x 1.5* 1.50 / 12 / 4 7.56 7.91 107 / MM 38 x 38 38 / 305 / 100 192 201 40 / IN 2 x 2* 2.00 14.50 14.625 14.50 4.44 6.50 8.90 119 95 MM 50 x 50 51 368 372 368 113 265 226 54 43 IN 3 x 3* 3.00 18.50 18.625 18.50 5.56 8.69 11.09 240 185 MM 80 x 80 76 381 384 381 141 221 282 109 84 IN 4 x 4 4.00 21.50 21.625 21.50 6.50 9.56 11.96 420 280 MM 100 x 100 102 457 460 457 165 243 304 191 127 IN 6 x 6 5.75 27.75 28.00 27.75 8.69 12.19 14.59 1190 900 MM 150 x 150 152 610 613 610 221 310 371 541 409 IN 8 x 8 8.00 32.75 33.125 32.75 10.38 14.80 17.20 1936 1355 MM 200 x 200 203 737 740 737 264 376 437 880 616 IN 10 x 10 10.00 39.00 39.375 39.00 12.13 16.63 19.78 3420 2394 MM 250 x 250 254 838 841 838 308 422 502 1555 1088 IN 12 x 12 12.00 44.50 45.125 44.50 13.88 18.69 21.84 5120 3500 MM 300 x 300 305 965 968 965 353 475 555 2327 682 IN 14 x 14 13.25 49.50 50.25 49.50 15.50 21.00 24.15 6259 4310 MM 350 x 350 337 1029 1038 1029 394 533 613 2845 1959 IN 16 x 16 15.25 54.50 55.375 54.50 17.19 22.75 26.75 9210 7668 MM 400 x 400 387 1130 1140 1130 437 578 680 4186 3485 IN 18 x 18 17.25 60.5 61.4 60.5 18.75 25.75 29.80 14260 11420 MM 450 x 450 438 1219 1232 1219 467 654 757 6482 5191 IN 20 x 20 19.25 65.5 66.4 65.5 20.50 27.05 32.50 20550 17467 MM 500 x 500 489 1321 1334 1321 521 687 826 9341 7940 IN 24 x 24 23.25 65.00 65.50 65.00 24.38 32.38 36.67 27590 23450 MM 600 x 600 591 1549 1569 1549 619 823 931 12540 10660 IN 30 x 30 27.00 90.00 91.14 90.00 41.96 / 52.16 25596 23548 MM 750 x 750 686 2286 2315 2286 1066 / 1325 11610 10681 IN 36 x 36 32.24 108.00 108.46 108.00 51.41 / 60.23 41535 37382 MM 900 x 900 819 2743 2755 2743 1306 / 1530 18840 16956

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 1500-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 18.50 18.625 18.50 5.22 7.28 9.68 170 155 MM 80 x 50 51 470 473 470 133 185 246 77 71 IN 4 x 3 3.00 21.50 21.625 21.50 6.34 9.47 11.87 320 265 MM 100 x 80 76 546 549 546 161 241 301 145 120 IN 6 x 4 4.00 27.75 28.00 27.75 7.28 10.34 12.74 650 540 MM 150 x 100 102 705 711 705 185 263 324 295 245 IN 8 x 6 6.00 32.75 33.125 32.75 9.47 13.29 15.59 1450 980 MM 200 x 150 152 832 841 832 241 338 396 659 445 IN 10 x 8 8.00 39.00 39.375 39.00 11.16 15.90 18.30 2380 1666 MM 250 x 200 203 991 1000 991 283 404 465 1082 757 IN 12 x 10 10.00 44.50 45.125 44.50 13.23 17.84 20.98 4070 2849 MM 300 x 250 254 1130 1146 1130 336 453 533 1850 1295 IN 14 x 12 12.00 49.50 50.25 49.50 14.98 20.00 23.04 5741 4020 MM 350 x 300 305 1257 1276 1257 381 508 585 2606 1827 IN 16 x 14 13.25 54.50 55.375 54.50 16.60 22.30 25.45 6678 5640 MM 400 x 350 337 1384 1407 1384 422 566 646 2845 1959 IN 18 x 16 15.25 57.00 57.50 57.00 18.39 24.05 28.05 12180 9740 MM 450 x 400 387 1448 1461 1448 467 611 712 5536 4427 IN 20 x 18 17.25 61.00 61.50 61.00 20.05 27.05 31.10 17360 14800 MM 500 x 450 438 1549 1562 1549 509 687 790 7891 6727 IN 24 x 20 19.25 65.00 65.50 65.00 21.90 28.80 33.90 23820 19120 MM 600 x 500 489 1651 1664 1651 556 732 861 10830 8690 IN 30 X 24 21.02 90.00 91.14 90.00 41.96 / 52.16 25596 23548 MM 750 x 600 534 2286 2315 2286 1066 / 1325 11610 10681 122

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 2500-3-piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 1 x 1* 1.00 / 14.0 / 3.78 7.56 / 97 / MM 25 x 25 25 / 356 / 96 192 / 36 / IN 1.5 x 1.5* 1.50 / 15.24 / 4.30 8.15 / 130 / MM 38 x 38 38 / 387 / 109 209 / 48 / IN 2 x 2* 2.00 19.75 17.875 17.75 4.44 7.28 10.90 225 216 MM 50 x 50 51 451 454 451 113 185 277 115 98 IN 3 x 3* 3.00 22.75 23.00 22.75 5.56 9.47 13.05 440 374 MM 80 x 80 76 578 584 578 141 241 331 200 170 IN 4 x 4 4.00 26.50 26.875 26.50 6.50 10.34 13.92 825 701 MM 100 x 100 102 673 682 673 165 263 354 370 314 IN 6 x 6 6.00 36.00 36.50 36.00 8.69 12.97 16.55 1790 1521 MM 150 x 150 152 914 927 914 220 329 420 800 680 IN 8 x 8 8.00 40.25 40.875 40.25 10.38 15.58 19.10 3500 2975 MM 200 x 200 203 1022 1038 1022 264 396 485 1600 1360 IN 10 x 10 10.00 50.00 50.875 50.00 12.13 17.41 21.74 5400 4590 MM 250 x 250 254 1270 1292 1270 308 442 552 2500 2940 IN 12 x 12 12.00 56.00 56.875 56.00 13.88 19.47 23.80 8300 7055 MM 300 x 300 305 1422 1444 1422 353 495 605 4000 3400 IN 14 x 14 12.75 57.00 57.875 57.00 15.50 21.78 26.11 12250 10020 MM 350 x 350 337 1448 1470 1448 394 553 663 3560 4550 IN 16 x 16 14.75 58.00 58.875 58.00 17.19 23.53 28.71 16890 13510 MM 400 x 400 387 1473 1495 1473 437 598 729 7670 6140 IN 18 x 18 16.75 59.00 59.875 59.00 18.75 26.53 31.75 21150 16920 MM 450 x 450 438 1499 1521 1499 476 674 806 9610 7690 IN 20 x 20 18.625 60.00 60.875 60.00 20.50 28.30 34.46 24630 19690 MM 500 x 500 489 1524 1546 1524 521 719 875 11195 8950 IN 24 x 24 22.50 61.00 61.75 61.00 24.38 33.20 38.63 29140 23310 MM 600 x 600 591 1549 1568 1549 619 843 981 13245 10600 123

CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS 2500-3-piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* 2.00 22.75 23.00 22.75 5.22 8.06 11.64 305 260 MM 80 x 50 50 51 578 584 578 133 205 296 120 IN 4 x 3 3.00 26.50 26.875 26.50 6.34 10.25 13.84 620 527 MM 100 x 80 80 76 673 683 673 161 260 352 240 IN 6 x 4 4.00 36.00 36.50 36.00 7.28 11.12 14.70 1270 1080 MM 150 x 100 102 914 927 914 185 282 373 373 490 IN 8 x 6 6.00 40.25 40.875 40.25 9.47 14.07 17.65 2630 2235 MM 200 x 150 152 1022 1038 1022 241 357 448 1195 995 IN 10 x 8 8.00 50.00 50.875 50.00 11.16 16.68 20.26 4750 4030 MM 250 x 200 203 1270 1292 1270 283 424 515 2160 1830 IN 12 x 10 10.00 56.00 56.875 56.00 13.23 18.62 22.94 6620 5620 MM 300 x 250 254 1422 1445 1422 336 473 583 3010 2550 IN 14 x 12 12.00 57.00 57.875 57.00 14.98 20.77 25.00 9880 7900 MM 350 x 300 305 1448 1470 1448 381 528 635 4990 3590 IN 16 x 14 12.75 58.00 58.875 58.00 16.60 23.10 27.41 14320 11450 MM 400 x 350 337 1473 1495 1473 422 587 696 6510 3200 IN 18 x 16 14.75 59.00 59.875 59.00 18.39 24.83 30.01 19110 15280 MM 450 x 400 387 1499 1521 1499 467 631 762 8690 6945 IN 20 x 18 16.75 60.00 60.875 60.00 20.05 27.83 33.05 22950 18360 MM 500 x 450 438 1424 1546 1424 509 707 838 10430 8345 IN 24 x 20 18.625 61.00 61.75 61.00 21.90 29.58 35.86 27350 21880 MM 600 x 500 489 1549 1568 1549 556 751 911 12431 9945 124

3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Flow Coefficients Cv Values & Operating Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size IN 2 x 2 MM 50 x 50 IN 3 x 2 MM 80 x 50 IN 3 x 3 MM 80 x 80 IN 4 x 3 MM 100 x 80 IN 4 x 4 MM 100 x 100 IN 6 x 4 MM 150 x 100 IN 6 x 6 MM 150 x 150 IN 8 x 6 MM 200 x 150 IN 8 x 8 MM 200 x 200 IN 10 x 8 MM 250 x 200 IN 10 x 10 MM 250 x 250 IN 12 x 10 MM 300 x 250 IN 12 x 12 MM 300 x 300 IN 14 x 12 MM 350 x 300 IN 14 x 14 MM 350 x 350 IN 16 x 14 MM 400 x 350 IN 16 x 16 MM 400 x 400 IN 18 x 16 MM 450 x 400 IN 18 x 18 MM 450 x 450 IN 20 x 18 MM 500 x 450 IN 20 x 20 MM 500 x 500 IN 24 x 20 MM 600 x 500 IN 24 x 24 MM 600 x 600 IN 26 x 26 MM 500 x 450 IN 28 x 28 MM 500 x 500 IN 30 x 30 MM 600 x 500 IN 36 x 36 MM 600 x 600 Class 150 300 600 900 1500 2500 GPM 500 500 350 320 320 295 GPM 220 220 190 185 180 295 GPM 1390 1390 1000 910 820 735 GPM 630 630 560 505 500 735 GPM 2550 2550 1850 1760 1610 1450 GPM 925 925 800 730 730 1450 GPM 5249 5249 4400 4300 4080 2530 GPM 2500 2500 2150 2010 2005 2530 GPM 10750 10750 8450 8400 7980 5400 GPM 500 5000 4500 4160 4150 5400 GPM 17775 17775 14250 14160 13020 8430 GPM 8400 8400 8000 7300 7280 8430 GPM 26750 26750 22790 21230 16910 12345 GPM 14080 14080 13990 13920 13810 12345 GPM 32600 32600 28600 26600 24080 / GPM 14780 14780 14720 14690 / / GPM 44700 44700 39250 36600 33110 / GPM 20840 20840 20750 20700 / / GPM 58500 58500 52000 50540 50360 / GPM 28100 28100 27850 27840 / / GPM 76000 76000 70500 69700 64750 / GPM 29000 29000 28750 26950 / / GPM 113500 113500 99000 86750 77460 / GPM / / / / / / GPM / / / / / / GPM / / / / / / GPM / / / / / / Operating Torques The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size IN MM 2 x 2 50 x 50 Ft. Lbs. IN 3 x 2 Ft. MM 80 x 50 Lbs. IN 3 x 3 Ft. MM 80 x 80 Lbs. IN 4 x 3 Ft. MM 100 x 80 Lbs. IN 4 x 4 Ft. MM 100 x 100 Lbs. IN 6 x 4 Ft. MM 150 x 100 Lbs. IN 6 x 6 Ft. MM 150 x 150 Lbs. IN 8 x 6 Ft. MM 200 x 150 Lbs. IN 8 x 8 Ft. MM 200 x 200 Lbs. IN 10 x 8 Ft. MM 250 x 200 Lbs. IN 10 x 10 Ft. MM 250 x 250 Lbs. IN 12 x 10 Ft. MM 300 x 250 Lbs. IN 12 x 12 Ft. MM 300 x 300 Lbs. IN 14 x 12 Ft. MM 350 x 300 Lbs. IN 14 x 14 Ft. MM 350 x 350 Lbs. IN 16 x 14 Ft. MM 400 x 350 Lbs. IN 16 x 16 Ft. MM 400 x 400 Lbs. IN 18 x 16 Ft. MM 450 x 400 Lbs. IN 18 x 18 Ft. MM 450 x 450 Lbs. IN 20 x 18 Ft. MM 500 x 450 Lbs. IN 20 x 20 Ft. MM 500 x 500 Lbs. IN 24 x 20 Ft. MM 600 x 500 Lbs. IN 24 x 24 Ft. MM 600 x 600 Lbs. IN 26 x 26 Ft. MM 500 x 450 Lbs. IN 28 x 28 Ft. MM 500 x 500 Lbs. IN 30 x 30 Ft. MM 600 x 500 Lbs. IN 36 x 36 Ft. MM 600 x 600 Lbs. Class 150 300 600 900 1500 2500 31 59 85 111 345 583 31 59 85 111 345 583 103 162 246 326 597 1025 103 162 246 326 597 1025 162 265 339 612 1106 2596 162 265 339 612 1106 2596 280 502 738 1387 2766 3806 280 502 738 1387 2766 3806 464 870 1475 2655 4057 5336 464 870 1475 2655 4057 5336 885 1564 2640 3894 5576 8273 885 1564 2640 3894 5576 8273 1220 1835 3976 5443 7228 11199 1220 1835 3976 5443 7228 11199 2060 3110 4809 6508 12920 / 2060 3110 4809 6508 12920 / 2769 4159 6408 8656 21299 / 2769 4159 6408 8656 21299 / 3753 6080 9844 13608 27892 / 3753 6080 9844 13608 27892 / 4724 8030 13642 19154 35888 / 4724 8030 13642 19154 35888 / 9068 14303 22779 31253 51482 / 10323 16856 25472 / / / 11577 19453 28164 / / / 12833 22083 30833 / / / 16917 26667 38000 / / / 125

Rising Stem Ball Valves Carbon & Stainless Steel Sizes 2-24 Class 150-900 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 (1/2 TO 24 ) & ANSI B16.47 (26 AND UP) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS 6755 126

Rising Stem Ball Valves Class 150-900 2-24 CARBON & STAINLESS STEEL RISING STEM BALL VALVES W 33 32 31 28, 29 30 H3 26, 27 23, 24, 25 22 20 18 16, 17 13 8, 9, 10 21 21 34 19 15 12 14 11 6 7 4 5 3 A1 A1 A2 1 Bill of material 2 NO NAME OF PART MATERIAL NO NAME OF PART MATERIAL 1 BODY A216-WCB 18 O-RING VITON 2 SLEEVE A102 F304 19 PACKING WASHER A276 410 3 SEAT F316 20 ANTI-FIRE RING GRAPHITE + 304 4 BALL A105 + 316 21 PACKING BUSHING A276 410 5 SEAT RING PTFE 22 PACKING GLAND A216-WCB 6 O-RING VITON 23 SWING BOLT AISI 1035 7 STEM F316 + N 24 PIN AISI 1035 8 GLAND A36 25 TIGHT PIN AISI 1045 9 TIGHT BOLT 65Mn 26 BOLT AISI 1045 10 NUT AISI 1035 27 GUIDE PIN 17-4PH 11 SLIP PIN 17-4PH 28 BOLT A193 B7 12 YOKE A276 410 29 NUT A194 2H 13 O-RING VITON 30 STEM NUT C95200 14 ANTI-FIRE RING GRAPHITE + 304 31 DRIVE DEVICE ASSEMBLY 15 BONNET A216-WCB 32 COVER A216 410 16 STUD BOLT A193 B7 33 INDICATOR ROD A36 17 NUT A194 2H 34 INJECTION ASSEMBLY 127

CARBON & STAINLESS STEEL RISING STEM BALL VALVES CLASS 150 - RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 7 7.5 8 12 15.5 18 26.5 30 27 35.5 34 36 42 mm 178 190 203 306 394 457 673 762 686 902 864 914 1067 in 8.5 9.5 11 12 18 20.5 22 25 30 33 36 39 45 mm 216 241 283 305 457 521 559 635 762 838 914 991 1143 in 15.2 15.5 15.8 20 27.2 31 39 46.5 49.4 61.6 64.4 67.1 74.1 mm 385 393 402 510 690 785 995 1183 1254 1565 1637 1705 1883 in 18.3 18.9 19.7 20 26.8 32.3 35.8 42.9 52.4 54.3 57 72.4 73.6 mm 465 480 500 510 680 820 910 1090 1330 1380 1450 1840 1870 in 8 12 12 12 16 20 24 24 26 26 28 28 32 mm 200 300 300 300 400 500 600 600 650 650 700 700 800 in 8 8 122 12 12 16 16 16 24 24 32 32 32 mm 200 200 300 300 300 400 400 400 600 600 800 800 800 lb 59.1 67.2 80.7 121.0 228.1 360.5 542.9 779.6 995.5 1435.9 1799.5 2178.9 3846.7 kg 27 31 37 55 104 164 247 354 453 653 818 990 1749 CLASS 300 - RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 8.5 9.5 11 14.5 20 23.33 26.5 30 32.5 39 36 39 45 mm 216 241 283 368 508 594 673 762 826 991 914 991 1143 in 8.5 9.5 11 12 18 20.5 22 25 30 33 36 39 45 mm 216 241 283 305 457 521 559 635 762 838 914 991 1143 in 15.2 15.5 15.8 20 27.2 31 39 46.5 49.4 61.6 64.4 67.1 74.1 mm 385 393 402 510 690 785 995 1183 1254 1565 1637 1705 1883 in 18.3 18.9 19.7 20 26.8 32.3 35.8 42.9 52.4 54.3 57 72.4 73.6 mm 465 480 500 510 680 820 910 1090 1330 1380 1450 1840 1870 in 8 12 12 12 16 20 24 24 26 26 28 28 32 mm 200 300 300 300 400 500 600 600 650 650 700 700 800 in 8 8 122 12 12 16 16 16 24 24 32 32 32 mm 200 200 300 300 300 400 400 400 600 600 800 800 800 lb 77.9 107.6 129.1 199.1 381.9 591.8 879.6 1334.7 1866.6 2674.4 3513.6 4159.0 6348.9 kg 35 49 59 91 174 269 400 607 848 1216 1597 1890 2886 128

CARBON & STAINLESS STEEL RISING STEM BALL VALVES CLASS 600 - RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 mm 51 64 76 102 152 203 254 305 356 406 457 508 610 in 11.5 13 14 17 22 26 31 33 35 39 43 47 55 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 in 11.5 13 14 17 22 26 31 33 35 39 43 47 55 mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 in 17.0 18.3 20.3 22.5 30.4 38 48.2 53.1 58.6 62.6 67.7 71 76.6 mm 430 465 515 572 773 967 1225 1350 1490 1590 1720 1805 1945 in 19.7 21 22.6 24.6 31.1 35.4 42.9 53.1 58.6 64.5 68.5 76 78.9 mm 501 535 575 625 790 900 1090 1350 1490 1640 1740 1930 2005 in 12 16 20 24 24 26 26 28 28 30 30 32 32 mm 300 400 500 600 600 650 650 700 700 750 750 800 800 in 12 12 12 16 16 16 24 24 24 32 32 32 32 mm 300 300 300 400 400 400 600 600 600 800 800 800 800 lb 115.7 161.4 188.4 360.5 766.2 1205.4 1828.8 2871.1 3459.9 4952.0 6954.0 8360.7 12611.1 kg 53 73 86 164 348 548 831 1306 1573 2251 3161 3800 5732 CLASS 900 - RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in 2 2.5 3 4 6 8 10 12 14 16 18 20 mm 51 64 76 102 152 203 254 305 356 406 457 508 in 14.5 16.5 15 18 24 29 33 38 40.5 44.5 48 52 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 in 14.5 16.5 15 18 24 29 33 38 40.5 44.5 48 52 mm 368 419 381 457 610 737 838 965 1029 1130 1219 1321 in 18.9 19.7 22 22.6 30.7 38.6 46.1 52.4 59.8 68.1 72.4 75.6 mm 480 500 560 575 780 980 1170 1330 1520 1730 1840 1920 in 22 23.2 24 27.2 27.8 36.6 44.5 52.4 58.3 67.3 75.6 81.9 mm 560 590 610 690 705 930 1130 1330 1480 1710 1920 2080 in 12 12 14 16 18 20 22 22 24 26 28 32 mm 300 300 350 400 450 500 550 550 600 650 700 800 in 12 12 12 16 16 24 24 32 32 32 32 32 mm 300 300 300 400 400 600 600 800 800 800 800 800 lb 220.8 417.2 444.1 468.4 1218.8 2098.4 3357.4 4148.0 5972.0 7460.3 10410.7 19637.7 kg 100 190 202 213 554 954 1526 1885 2716 3391 4732 8926 129

Pressure Temperature Ratings - ASME B16.34-2004 Note: Pressures in PSI 150 300 Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 285 285 285 290 265 290 290 290 290 290 275 275 290 290 200 260 260 260 260 255 260 260 260 260 260 235 235 260 260 300 230 230 230 230 230 230 230 230 230 230 215 215 230 230 400 200 200 200 200 200 200 200 200 200 200 195 195 200 200 500 170 170 170 170 170 170 170 170 170 170 170 170 170 170 600 140 140 140 140 140 140 140 140 140 140 140 140 140 140 650 125 125 125 125 125 125 125 125 125 125 125 125 125 125 700 110 110 110 110 110 110 110 110 110 110 110 110 110 110 750 95 95 95 95 95 95 95 95 95 95 95 95 95 95 800 80 80 80 80 80 80 80 80 80 80 80 80 / / 850 65 65 65 65 65 65 65 65 65 65 65 65 / / 900 50 50 50 50 50 50 50 50 50 50 50 50 / / 950 35 35 35 35 35 35 35 35 35 35 35 35 / / 1000 20 20 20 20 20 20 20 20 20 20 20 20 / / 1050 / / / / / 20 / 20 20 20 20 20 / / 1100 / / / / / 20 / 20 20 20 20 20 / / 1150 / / / / / 20 / 20 20 20 20 20 / / 1200 / / / / / 15 / 15 20 20 20 20 / / 1250 / / / / / / / / / / 20 20 / / 1300 / / / / / / / / / / 20 20 / / 1350 / / / / / / / / / / 20 20 / / 1400 / / / / / / / / / / 20 20 / / 1450 / / / / / / / / / / 20 20 / / 1500 / / / / / / / / / / 15 15 / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 740 740 740 750 695 750 750 750 750 750 720 720 750 750 200 680 680 680 750 660 750 750 750 750 750 620 620 745 745 300 655 655 655 730 640 720 730 730 730 730 560 560 665 665 400 635 635 635 705 615 695 705 705 705 705 515 515 615 615 500 605 605 605 665 585 665 665 665 665 665 480 480 580 580 600 570 570 570 605 550 605 605 605 605 605 450 450 555 555 650 550 550 550 590 535 590 590 590 590 590 440 440 545 545 700 530 530 530 555 510 570 555 570 570 570 435 435 540 540 750 505 505 505 505 475 530 505 530 530 530 425 425 530 530 800 410 410 410 410 390 510 410 510 510 510 420 420 / / 850 320 320 320 320 300 485 320 485 485 485 420 420 / / 900 230 230 230 225 200 450 225 375 450 450 415 415 / / 950 135 135 135 135 135 320 135 275 375 385 385 385 / / 1000 85 85 85 85 85 215 85 200 255 365 365 365 / / 1050 / / / / / 145 / 145 170 360 160 160 / / 1100 / / / / / 95 / 100 115 300 305 305 / / 1150 / / / / / 65 / 60 75 225 235 235 / / 1200 / / / / / 40 / 35 50 145 185 185 / / 1250 / / / / / / / / / / 145 145 / / 1300 / / / / / / / / / / 115 115 / / 1350 / / / / / / / / / / 95 95 / / 1400 / / / / / / / / / / 75 75 / / 1450 / / / / / / / / / / 60 60 / / 1500 / / / / / / / / / / 40 40 / / 130

Pressure Temperature Ratings - ASME B16.34-2004 Note: Pressures in PSI 600 900 Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 1480 1480 1480 1500 1395 1500 1500 1500 1500 1500 1440 1440 1500 1500 200 1360 1360 1360 1500 1320 1500 1500 1500 1500 1500 1240 1240 1490 1490 300 1310 1310 1310 1455 1275 1445 1455 1455 1455 1455 1120 1120 1335 1335 400 1265 1265 1265 1405 1230 1385 1405 1410 1410 1410 1025 1025 1230 1230 500 1205 1205 1205 1330 1175 1330 1330 1330 1330 1330 995 995 1160 1160 600 1135 1135 1135 1210 1105 1210 1210 1210 1210 1210 900 900 1115 1115 650 1100 1100 1100 1175 1065 1175 1175 1175 1175 1175 885 885 1095 1095 700 1060 1060 1060 1110 1025 1135 1110 1135 1135 1135 870 870 1085 1085 750 1015 1015 1015 1015 955 1065 1015 1065 1065 1065 855 855 1065 1065 800 825 825 825 825 780 1015 825 1015 1015 1015 845 845 / / 850 640 640 640 640 595 975 640 975 975 975 835 835 / / 900 460 460 460 445 405 900 445 745 900 900 830 830 / / 950 275 275 275 275 275 640 275 550 755 775 775 775 / / 1000 170 170 170 170 170 430 170 400 505 725 725 725 / / 1050 / / / / / 290 / 290 345 720 720 720 / / 1100 / / / / / 190 / 200 225 605 610 610 / / 1150 / / / / / 130 / 125 150 445 475 475 / / 1200 / / / / / 80 / 70 105 290 370 370 / / 1250 / / / / / / / / / / 295 295 / / 1300 / / / / / / / / / / 235 235 / / 1350 / / / / / / / / / / 190 190 / / 1400 / / / / / / / / / / 150 150 / / 1450 / / / / / / / / / / 115 115 / / 1500 / / / / / / / / / / 85 85 / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 2220 2220 2220 2250 2090 2250 2250 2250 2250 2250 2160 2160 2250 2250 200 2035 2035 2035 2250 1980 2250 2250 2250 2250 2250 1860 1860 2230 2230 300 1965 1965 1965 2185 1915 2165 2185 2185 2185 2185 1680 1680 2000 2000 400 1900 1900 1900 2110 1845 2080 2110 2115 2115 2115 1540 1540 1845 1845 500 1810 1810 1810 1995 1760 1995 1995 1995 1995 1995 1435 1435 1740 1740 600 1705 1705 1705 1815 1655 1815 1815 1815 1815 1815 1355 1355 1670 1670 650 1650 1650 1650 1765 1600 1765 1765 1765 1765 1765 1325 1325 1640 1640 700 1590 1590 1590 1665 1535 1705 1665 1705 1705 1705 1305 1305 1625 1625 750 1520 1520 1520 1520 1430 1595 1520 1595 1595 1595 1280 1280 1595 1595 800 1235 1235 1235 1235 1175 1525 1235 1525 1525 1525 1265 1265 / / 850 955 955 955 955 895 1460 955 1460 1460 1460 1255 1255 / / 900 690 690 690 670 605 1350 670 1120 1350 1350 1245 1245 / / 950 410 410 410 410 410 955 410 825 1130 1160 1160 1160 / / 1000 255 255 255 255 255 650 255 595 760 1090 1090 1090 / / 1050 / / / / / 430 / 430 515 1080 1080 1080 / / 1100 / / / / / 290 / 300 340 905 915 915 / / 1150 / / / / / 195 / 185 225 670 710 710 / / 1200 / / / / / 125 / 105 155 430 555 555 / / 1250 / / / / / / / / / / 440 440 / / 1300 / / / / / / / / / / 350 350 / / 1350 / / / / / / / / / / 290 290 / / 1400 / / / / / / / / / / 225 225 / / 1450 / / / / / / / / / / 175 175 / / 1500 / / / / / / / / / / 125 125 / / 131

Pressure Temperature Ratings - ASME B16.34-2004 Note: Pressures in PSI 1500 2500 Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 3705 3705 3705 3750 3480 3750 3750 3750 3750 3750 3600 3600 3750 3750 200 3395 3395 3395 3750 3300 3750 3750 3750 3750 3750 3095 3095 3720 3720 300 3270 3270 3270 3640 3190 3610 3640 3640 3640 3640 2795 2795 3335 3335 400 3170 3170 3170 3520 ASTM 3075 # 3465 3520 3530 3530 3530 2570 2570 3070 3070 500 3015 3015 3015 3325 2930 3325 3325 3325 3325 3325 2390 2390 2905 2905 600 2840 2840 2840 3025 2755 3025 3025 3025 3025 3025 2255 2255 2785 2785 650 2745 2745 2745 2940 2665 2940 2940 2940 2940 2940 2210 2210 2735 2735 700 2665 2665 2665 2775 2560 2840 2775 2840 2840 2840 2170 2170 2710 2710 750 2535 2535 2535 2535 2385 2660 2535 2660 2660 2660 2135 2135 2660 2660 800 2055 2055 2055 2055 1955 2540 2055 2540 2540 2540 2110 2110 / / 850 1595 1595 1595 1595 1490 2435 1595 2435 2435 2435 2090 2090 / / 900 1150 1150 1150 1115 1010 2245 1115 1870 2245 2245 2075 2075 / / 950 685 685 685 685 685 1591 685 1370 1885 1930 1930 1930 / / 1000 430 430 430 430 430 1080 430 995 1270 1820 1820 1820 / / 1050 / / / / / 720 / 720 855 1800 1800 1800 / / 1100 / / / / / 480 / 495 565 1510 1525 1525 / / 1150 / / / / / 325 / 310 375 1115 1185 1185 / / 1200 / / / / / 205 / 170 255 720 925 925 / / 1250 / / / / / / / / / / 735 735 / / 1300 / / / / / / / / / / 585 585 / / 1350 / / / / / / / / / / 480 480 / / 1400 / / / / / / / / / / 380 380 / / 1450 / / / / / / / / / / 290 290 / / 1500 / / / / / / / / / / 205 205 / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to 100 6170 6170 6170 6250 5805 6250 6250 6250 3250 6250 6000 6000 6250 6250 200 5655 5655 5655 6250 5505 6250 6250 6250 6250 6250 5160 5160 6200 6200 300 5450 5450 5450 6070 5315 6015 6070 6070 6070 6070 4660 4660 5560 5560 400 5280 5280 5280 5865 5125 5775 5865 5880 5880 5880 4280 4280 5120 5120 500 5025 5025 5025 5540 4885 5540 5540 5540 5540 5540 3980 3980 4840 4840 600 4730 4730 4730 5040 4595 5040 5040 5040 5040 5040 3760 3760 4640 4640 650 4575 4575 4575 4905 4440 4905 4905 4905 4905 4905 3680 3680 4560 4560 700 4425 4425 4425 4630 4270 4730 4630 4730 4730 4730 3620 3620 4520 4520 750 4230 4230 4230 4230 3970 4430 4230 4430 4430 4430 3560 3560 4430 4430 800 3430 3430 3430 3430 3255 4230 3430 4230 4230 4230 3520 3520 / / 850 2655 2655 2655 2655 2485 4060 2655 4060 4060 4060 3480 3480 / / 900 1915 1915 1915 1855 1685 3745 1855 3115 3745 3745 3460 3460 / / 950 1145 1145 1145 1145 1145 3655 1145 2285 3145 3220 3220 3220 / / 1000 715 715 715 715 715 1800 715 1655 2115 3030 3030 3030 / / 1050 / / / / / 1200 / 1200 1430 3000 3000 3000 / / 1100 / / / / / 800 / 830 945 2515 2545 2545 / / 1150 / / / / / 545 / 515 630 1855 1970 1970 / / 1200 / / / / / 345 / 285 770 1200 1545 1545 / / 1250 / / / / / / / / / / 1230 1230 / / 1300 / / / / / / / / / / 970 970 / / 1350 / / / / / / / / / / 800 800 / / 1400 / / / / / / / / / / 630 630 / / 1450 / / / / / / / / / / 485 485 / / 1500 / / / / / / / / / / 345 345 / / 132

Flange Dimensions - ANSI B16.5 & B16.47 T L r F R C O P K O Groove Detail Class 150 300 Flg. Dia. Flg. Thick. Raised Face Dia. Drilling Face Dia. Ring Joint Size Bolt Pitch Grv. Grv. Btm. CIrcle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R C K P L F r 2 6.00 0.75 3.62 4.75 4 0.75 4.00 3.250 0.250 0.344 0.03 R22 2.5 7.00 0.88 4.12 5.50 4 0.75 4.75 4.000 0.250 0.344 0.03 R25 3 7.50 0.94 5.00 6.00 4 0.75 5.25 4.500 0.250 0.344 0.03 R29 4 9.00 0.94 6.19 7.50 8 0.75 6.75 5.875 0.250 0.344 0.03 R36 6 11.00 1.00 8.50 9.50 8 0.88 8.62 7.625 0.250 0.344 0.03 R43 8 13.50 1.12 10.62 11.75 8 0.88 10.75 9.750 0.250 0.344 0.03 R48 10 16.00 1.19 12.75 14.25 12 1.00 13.00 12.000 0.250 0.344 0.03 R52 12 19.00 1.25 15.00 17.00 12 1.00 16.00 15.000 0.250 0.344 0.03 R56 14 21.00 1.38 16.25 18.75 12 1.12 16.75 15.625 0.250 0.344 0.03 R59 16 23.50 1.44 18.50 21.25 16 1.12 19.00 17.875 0.250 0.344 0.03 R64 18 25.00 1.56 21.00 22.75 16 1.25 21.50 20.375 0.250 0.344 0.03 R68 20 27.50 1.69 23.00 25.00 20 1.25 23.50 22.000 0.250 0.344 0.03 R72 22 29.50 1.81 25.25 27.25 20 1.38 / / / / / / 24 32.00 1.88 27.25 29.50 20 1.38 28.00 26.500 0.250 0.344 0.03 R76 26 34.25 2.69 29.50 31.75 24 1.38 / 29.500 0.500 0.781 0.060 R93 28 36.50 2.81 31.50 34.00 28 1.38 / 31.500 0.500 0.781 0.060 R94 30 38.75 2.94 33.75 36.00 28 1.38 / 33.750 0.500 0.781 0.060 R95 32 41.75 3.19 36.00 38.50 28 1.62 / 36.000 0.562 0.906 0.060 R96 34 43.75 3.25 38.00 40.50 32 1.62 / 38.000 0.562 0.906 0.060 R97 36 46.00 3.56 40.25 42.75 32 1.62 / 40.250 0.562 0.906 0.060 R98 2 6.50 0.88 3.62 5.00 8 0.75 4.25 3.250 0.312 0.469 0.03 R23 2.5 7.50 1.00 4.12 5.88 8 0.88 5.00 4.000 0.312 0.469 0.03 R26 3 8.25 1.12 5.00 6.62 8 0.88 5.75 4.875 0.312 0.469 0.03 R31 4 10.00 1.25 6.19 7.88 8 0.88 6.88 5.875 0.312 0.469 0.03 R37 6 12.50 1.44 8.50 10.62 12 0.88 9.50 8.312 0.312 0.469 0.03 R45 8 15.00 1.62 10.62 13.00 12 1.00 11.88 10.625 0.312 0.469 0.03 R49 10 17.50 1.88 12.75 15.25 16 1.12 14.00 12.750 0.312 0.469 0.03 R53 12 20.50 2.00 15.00 17.75 16 1.25 16.25 15.000 0.312 0.469 0.03 R57 14 23.00 2.12 16.25 20.25 20 1.25 18.00 16.500 0.312 0.469 0.03 R61 16 25.50 2.25 18.50 22.50 20 1.38 20.00 18.500 0.312 0.469 0.03 R65 18 28.00 2.38 21.00 24.75 24 1.38 22.62 21.000 0.312 0.469 0.03 R69 20 30.50 2.50 23.00 27.00 24 1.38 25.00 23.000 0.375 0.531 0.06 R73 22 33.00 2.62 25.25 29.25 24 1.62 27.00 25.000 0.438 0.594 0.06 R81 24 36.00 2.75 27.25 32.00 24 1.62 29.50 27.250 0.438 0.656 0.06 R77 26 38.25 3.31 29.50 34.50 28 1.75 31.88 29.500 0.500 0.781 0.06 R93 28 40.75 3.56 31.50 37.00 28 1.75 33.88 31.500 0.500 0.781 0.06 R94 30 43.00 3.75 33.75 39.25 28 1.88 36.12 33.750 0.500 0.781 0.06 R95 32 45.25 3.94 36.00 41.50 28 2.00 38.75 36.000 0.562 0.906 0.06 R96 34 47.50 4.12 38.00 43.50 28 2.00 40.75 38.000 0.562 0.906 0.06 R97 36 50.00 4.38 40.25 46.00 32 2.12 43.00 40.250 0.562 0.906 0.06 R98 133

Flange Dimensions - ANSI B16.5 & B16.47 T L r F R C O P K O Groove Detail 134 600 Flg. Dia. Flg. Thick. Circle Raise Drilling Face Dia. Ring Joint Class Size Bolt Pitch Grv. Grv. Btm. CIrcle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R C K P L F r 2 6.50 1.00 3.62 5.00 8 0.75 4.25 3.250 0.312 0.469 0.03 R23 2.5 7.50 1.12 4.12 5.88 8 0.88 5.00 4.000 0.312 0.469 0.03 R26 3 8.25 1.25 5.00 6.62 8 0.88 5.75 4.875 0.312 0.469 0.03 R31 4 10.75 1.50 6.19 8.50 8 1.00 6.88 5.875 0.312 0.469 0.03 R37 6 14.00 1.88 8.50 11.50 12 1.12 9.50 8.312 0.312 0.469 0.03 R45 8 16.50 2.19 10.62 13.75 12 1.25 11.88 10.625 0.312 0.469 0.03 R49 10 20.00 2.50 12.75 17.00 16 1.38 14.00 12.750 0.312 0.469 0.03 R53 12 22.00 2.62 15.00 19.25 20 1.38 16.25 15.000 0.312 0.469 0.03 R67 14 23.75 2.75 16.25 20.75 20 1.5 18.00 16.500 0.312 0.469 0.03 R61 16 27.00 3.00 18.50 23.75 20 1.62 20.00 18.500 0.312 0.469 0.03 R65 18 29.25 3.25 21.00 25.75 20 1.75 22.62 21.000 0.312 0.469 0.03 R69 20 32.00 3.50 23.00 28.50 24 1.75 25.00 23.000 0.375 0.531 0.06 R73 22 34.25 3.75 25.25 30.62 24 1.88 27.00 25.000 0.438 0.594 0.06 R81 24 37.00 4.00 27.25 33.00 24 2.00 29.50 27.250 0.438 0.659 0.06 R77 2 8.5 1.5 3.62 6.5 8 1 4.88 3.75 0.312 0.469 0.03 R24 2.5 9.62 1.62 4.12 7.50 8 1.12 5.39 4.250 0.312 0.469 0.03 R27 3 9.50 1.50 5.00 7.50 8 1.00 6.12 4.875 0.312 0.469 0.03 R31 4 11.50 1.75 6.19 9.25 8 1.25 7.12 5.875 0.312 0.469 0.03 R37 6 15.50 2.19 8.50 12.50 12 1.25 9.50 8.312 0.312 0.469 0.03 R45 8 18.50 2.50 10.62 15.50 12 1.50 12.12 10.625 0.312 0.469 0.03 R49 10 21.50 2.75 12.75 18.50 16 1.50 14.25 12.750 0.312 0.469 0.03 R53 12 24.00 3.12 15.00 21.00 20 1.50 16.50 15.000 0.312 0.469 0.03 R57 14 25.25 3.38 16.25 22.00 20 1.62 18.38 16.500 0.438 0.656 0.06 R62 16 27.75 3.50 18.50 24.25 20 1.75 20.62 18.500 0.438 0.656 0.06 R66 18 31.00 4.00 21.00 27.00 20 2.00 23.38 21.00 0.500 0.781 0.06 R70 20 33.75 4.25 23.00 29.50 20 2.12 25.50 23.000 0.500 0.781 0.06 R74 24 41.00 5.50 27.25 35.50 20 2.62 30.38 27.250 0.625 1.062 0.09 R78 2 8.50 1.50 3.62 6.50 8 1.00 4.88 3.750 0.312 0.469 0.03 R24 2.5 9.62 1.62 4.12 7.50 8 1.12 5.38 4.250 0.312 0.469 0.03 R27 3 10.50 1.88 5.00 8.00 8 1.25 6.62 5.375 0.312 0.469 0.03 R35 4 12.25 2.12 6.19 9.50 8 1.38 7.62 6.375 0.312 0.469 0.03 R39 6 15.50 3.25 8.50 12.50 12 1.50 9.75 8.312 0.375 0.531 0.06 R46 8 19.00 3.62 10.62 15.50 12 1.75 12.50 10.625 0.438 0.656 0.06 R50 10 23.00 4.25 12.75 19.00 12 2.00 14.62 12.750 0.438 0.656 0.06 R54 12 26.00 4.88 15.00 22.50 16 2.12 17.25 15.000 0.562 0.906 0.06 R58 14 29.50 5.25 16.25 25.00 16 2.38 19.25 16.500 0.625 1.062 0.09 R63 16 32.50 5.75 18.50 27.75 16 2.62 21.50 18.500 0.688 1.188 0.09 R67 18 36.00 6.38 21.00 30.50 16 2.88 24.12 21.000 0.688 1.188 0.09 R71 20 38.75 7.00 23.00 32.75 16 3.12 26.50 23.000 0.688 1.312 0.09 R75 24 46.00 8.00 27.25 39.00 16 3.62 31.25 27.250 0.812 1.438 0.09 R79 2 9.25 2.00 3.62 6.75 8 1.00 4.48 4.000 0.312 0.469 0.030 R26 2.5 10.50 2.25 4.12 7.75 8 1.13 5.86 4.375 0.375 0.531 0.060 R28 3 12.00 2.62 5.00 9.00 8 1.25 6.61 5.000 0.375 0.531 0.060 R32 4 14.00 3.00 6.19 10.75 8 1.50 7.99 6.188 0.438 0.656 0.060 R38 5 16.50 3.62 7.31 12.75 8 1.75 9.48 7.500 0.500 0.781 0.060 R40 6 19.00 4.25 8.50 14.50 8 2.00 10.98 9.000 0.500 0.781 0.060 R47 8 21.75 5.00 10.62 17.25 12 2.00 13.38 11.000 0.562 0.906 0.060 R51 10 26.50 6.50 12.75 21.75 12 2.50 16.73 13.500 0.688 1.188 0.090 R55 12 30.00 7.25 15.00 24.38 12 2.75 19.48 16.000 0.688 1.312 0.090 R60 900 1500 2500

Butt-welding Dimensions - ANSI B16.25 Nominal Pipe Size Schedule Number or Wall Outside Diameter (Cast Steel Valves) A Nominal Inside Diameter B Machined Inside Diameter C Nominal Wall Thickness t Inches mm Inches mm Inches mm Inches mm 3 xxs 3-19/32 91.282 2.300 58.42 2.409 61.19 0.600 15.24 4 xxs 4-5/8 117.48 3.152 80.06 3.279 83.29 0.674 17.12 5 6 8 10 12 14 16 18 20 24 160 4.313 109.55 4.428 112.47 0.625 15.88 5-11/16 144.46 xxs 4.063 103.20 4.209 106.91 0.750 19.05 120 5.501 139.72 5.600 142.24 0.562 14.27 160 6-25/32 172.34 5.189 131.80 5.327 135.31 0.719 18.26 xxs 4.897 124.38 5.072 128.83 0.864 21.95 100 7.439 188.93 7.546 191.67 0.594 15.09 120 7.189 182.60 7.327 186.11 0.719 18.26 140 8-23/32 223.04 7.001 177.83 7.163 181.94 0.812 20.62 xxs 6.875 174.63 7.053 179.15 0.875 22.23 160 6.813 173.05 6.998 177.75 0.960 23.01 50 9.564 242.93 9.671 245.64 0.594 15.09 100 9.314 236.58 9.452 240.08 0.719 18.26 120 10-15/16 277.81 9.064 230.23 9.234 234.54 0.844 21.44 140 8.750 222.25 8.959 227.56 1.000 25.40 160 8.500 215.90 8.740 222.00 1.125 28.58 60 11.626 295.30 11.725 297.82 0.562 14.27 80 11.376 288.95 11.507 292.28 0.688 17.48 100 11.064 281.03 11.234 284.34 0.844 21.44 12-31/32 329.41 120 10.750 273.05 10.959 278.36 1.000 25.40 140 10.500 266.70 10.740 272.80 1.125 28.58 160 10.126 257.20 10.413 264.49 1.312 33.32 60 12.814 352.48 12.921 328.19 0.594 15.09 80 12.500 317.50 12.646 321.21 0.750 19.05 100 12.126 308.00 12.319 312.90 0.938 23.83 14-1/4 361.95 120 11.814 300.08 12.046 305.97 1.094 27.79 140 11.500 292.10 11.771 298.98 1.250 31.75 160 11.188 284.18 11.498 292.05 1.406 35.71 60 14.688 373.08 14.811 376.20 0.656 16.66 80 14.314 363.58 14.484 367.89 0.844 21.44 100 13.938 354.03 14.155 359.54 1.031 26.19 16-1/4 412.75 120 13.564 344.53 13.827 351.21 1.219 30.96 140 13.124 333.35 13.442 341.43 1.438 36.53 160 12.814 325.48 13.171 334.54 1.594 40.49 40 16.876 428.65 16.975 431.17 0.562 14.27 60 16.500 419.10 16.646 422.81 0.750 19.05 80 16.126 409.60 16.319 414.50 0.938 23.83 100 18-9/32 464.34 15.688 398.48 15.936 404.50 1.156 29.36 120 15.250 387.35 15.553 395.05 1.375 34.93 140 14.876 377.85 15.225 386.72 1.562 39.67 160 14.438 366.73 14.842 376.99 1.781 45.24 40 18.814 477.88 18.921 480.59 0.594 15.09 60 18.376 466.75 18.538 470.87 0.812 20.62 80 17.938 455.63 18.155 461.14 1.031 26.19 100 20-5/16 515.94 17.438 442.93 17.717 450.01 1.281 32.54 120 17.000 431.80 17.334 440.28 1.500 38.10 140 16.500 419.10 16.896 429.16 1.750 44.45 160 16.064 408.03 16.515 419.48 1.969 50.01 30 22.876 581.05 22.975 583.57 0.562 14.27 40 22.626 574.70 22.757 578.03 0.688 17.48 60 22.064 560.43 22.265 565.53 0.969 24.61 80 21.564 547.73 21.827 554.41 1.219 30.96 24-3/8 619.13 100 20.938 531.83 21.280 540.51 1.531 38.89 120 20.376 517.55 20.788 528.02 1.812 46.02 140 19.876 504.85 20.350 516.89 2.062 52.37 160 19.314 490.58 19.859 504.42 2.344 59.54 135

Butt-welding Dimensions - ANSI B16.25 Plain Bevel Butt-welding End for Pipe Wall Thickness is 7/8 (22.23mm) or less. Welding end details for cast components for use without backing ring or with split backing ring. Compound Bevel Butt-welding End for Pipe Wall Thickness Greater than 7/8 (22.23mm). Welding end details for cast components for use without backing ring or with split backing ring. 45 Typical Sections Outside Contour Max Slope Line 45 Typical Sections Outside Contour Max Slope Line 37.5 +_ 2.5 10 +_ 1 Rad Max 30 1.5 t Inside Contour 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A Max 30 3/4 (19mm) 1.5 t Inside Contour 37.5 +_ 2.5 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A Plain Bevel Butt-welding End for Pipe Wall Thickness is 7/8 (22.23mm) or less. Welding end details for cast components for use with continuous rectangular or tapered backing ring. Compound Bevel Butt-welding End for Pipe Wall Thickness Greater than 7/8 (22.23mm). Welding end details for cast components for use with continuous rectangular or tapered backing ring. 45 Typical Sections Outside Contour Max Slope Line 45 Typical Sections Outside Contour Max Slope Line 37.5 +_ 2.5 10 +_ 1 Rad Inside Contour Max 30 Max 30 1/2 (12.7mm) Min. 1.5 t 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B C A Inside Contour Max 30 3/4 (19mm) 37.5 +_ 2.5 1.5 t 7/32 (5.6mm) 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A 136

Industry Standards for Valve Manufacturing This information is for reference only. American Society of Mechanical Engineers (ASME) ASME Code - Boiler & pressure vessel code ASME A13.1 - Scheme for the identification of piping systems ASME B1.1 - Unified inch screw threads, UN, & UNR thread form ASME B1.5 - ACME screw threads ASME B1.7M - Nomenclature, definitions, & letter symbols for screw threads ASME B1.8 - Stub ACME screw threads ASME B1.12 - Class 5 interference - fit thread ASME B1.20.1 - Pipe threads, general purpose, inch ASME B1.20.3 - Dry-seal pipe threads, inch ANSI/ASME B16.1 - Cast iron pipe flanges & flanged fittings ANSI/ASME B16.5 - Pipe flanges & flanged fittings: NPS 1/2-24 ASME B16.9 - Factory made wrought steel buttwelding fittings ANSI/ASME B16.10 - Face-to-face & end-to-end dimensions of valves ASME B16.11 - Forged fittings, socket welding & threaded ASME B16.20 - Metallic gaskets for pipe flanges: ring joint spiral wound & jacketed ASME B16.21 - Non-metallic flat gaskets for pipe flanges ASME B16.25 - Buttwelding ends ANSI/ASME B16.33 - Manually operated metallic gas valves for use in gas piping systems up to 125 PSI (sizes NPS 1/2-2 ) ANSI/ASME B31.1 - Power piping ANSI/ASME B31.3 - Process piping ANSI/ASME B16.34 - Valves flanged, threaded & welding end ANSI/ASME B16.36 - Orifice flanges ANSI/ASME B16.38 - Large metallic valves for gas distribution (manually operated, NPS 2-1/2-12, 125 PSIG maximum) ANSI/ASME B16.42 - Ductile iron pipe flanges & flanged fittings: classes 150 & 300 ANSI/ASME B16.47 - Large diameter steel flanges ANSI B17.1 - Keys & keyseats ANSI B18.2.2 - Square & hex nuts ASME B31.4 - Pipeline transportation systems for liquid hydrocarbons & other ammonia & alcohols ANSI/ASME B31.8 - Gas transmission & distribution piping systems ANSI/ASME B36.10 - Welded & seamless wrought steel pipe ANSI/ASME B36.19 - Stainless steel pipe ANSI FCI-2 - Control valve seat leakage American Society Non-destructive Test (ASNT) ASNT-TC-1A - Recommended practice no. SNT-TC-1A 1996 American Society for Testing and Materials (ASTM) American Petroleum Institute (API) API RP 574 - Inspection practices for piping system components API 589 - Fire test for evaluation of valve stem packing API RP 591 - Process valve qualification procedure API 594 - Check valves-flanged, lug, wafer & buttwelding API 597 - Steel venturi gate valves, flanged, buttwelding ends API 598 - Valve inspection & testing API 599 - Metal plug valves - flanged, welding ends API 601 - Metallic gaskets for raised-face pipe flanges & flanged connections (double-jacketed corrugated & spiral wound) API 600 - Bolted bonnet steel gate valves for petroleum & natural as industries ISO adoption from ISO 10434 API 602 - Steel gate, globe, & check valves for sizes DN100 and smaller for the petroleum & natural gas industries API 603 - Corrosion-resistant, bolted bonnet gate valves-flanged & buttweld ends API 604 - Ductile iron gate valves, flanged ends API 605 - Large-diameter carbon steel flanges (nominal pipe sizes 26-60, classes 75, 150, 300, 400, 600, & 900 (replaced by ANSI/ASME B16.47) API 606 - Compact steel gate valves, extended body (included in API 602) fire test for soft-seated quarterturn valves ISO adoption from ISO 10497-5 2004 API 607 - Fire test for soft-seated quarter-turn valves ISO adoption from ISO 10497-5 2004 API 608 - Metal ball valves, flanged, threaded, & welding ends API 609 - Butterfly valves-double flanged, lug- & wafer-type API RP 941 - Steel for hydrogen service at elevated temperatures & pressures in petroleum refineries & petrochemical plants API RP 520, Part 1 - Sizing, selection & installation of pressure relieving devices in refineries API RP 520, Part 2 - Sizing, selection & installation of pressure relieving devices in refineries devices in refineries API Spec 6A - Specification for wellhead & christmas tree equipment API Spec 6D - Specifications for pipeline valves API Spec 14D - Specifications for wellhead surface safety valves & underwater safety valves for offshore service API 5B - Threading, gauging thread inspection of coring, tubing, & line pipe threads API 6AM - Material toughness API 6FA - Fire test for valves API 6FC - Fire test for valves with backseats API 6FD - Specification for fire test for check valves API Q1 - Specification for quality programs for the petroleum, petrochemical, & natural gas National Association of Corrosion Engineers (NACE) MR0175 - Sulfide stress cracking resistant metallic materials for oil field equipment MR0103 - Materials resistant to sulfide street cracking in corrosive petroleum refining environments British Standards Institute (BS) BS 1414 - Gate, wedge & double disk valves: steel BS 1868 - Check valves: steel BS 1873 - Globe & check valves: steel BS 2080 - Flanged & buttweld end steel valves BS 5146 - (withdrawn) Replaced by BS 6755 p.1 steel valves testing (1986) & BS 6755 p.2 (1984) BS 5152 - Globe & check: cast iron BS 5153 - Check: cast iron BS 5159 - Ball: cast iron & carbon steel BS 5160 - Globe & check: steel BS 5163 - Gate, wedge & double disk: cast iron BS 5351 - Ball: steel BS 5352 - Globe & check: steel BS 5418 - (withdrawn) Replaced by BS EN 19 (1992) marking: general purpose industrial BS 5840 - Valve mating details for actuator operation BS 6364 - Cryogenic BS 6683 - Guide: installation & use of valves BS 6755: Part 1 - Specification for production pressure testing requirements BS 6755: Part 2 - Specification for fire type-testing requirements BS EN 19 - Marking of general purpose industrial valves Canadian Standards Association B51-97 - Boiler, pressure vessel, & pressure piping code Z245.15-96 - Steel valves CAN3-z299.4-85 - Quality assurance program - Category 4 CAN3-z299.3-85 - Quality assurance program - Category 3 International Organization for Standardization ISO 5211/1 - Industrial valves- part-turn actuator attachments ISO 5211/2 - Part-turn valve actuator attachment-flange & coupling performance characteristics ISO 5211/3 - Part-turn valve actuator attachment-dimensions of driving components ISO 5752 - Metal valves for use in flanged pipe systems face-to-face & center-to-face dimensions ISO 9000 - Quality management systems and fundamentals & vocabulary ISO 10012-1 - Quality assurance requirements for measuring equipment Manufacturers Standardization Society SP-6 - Standard finishes for contact faces of pipe flanges & connecting-end flanges of valves & fittings SP-9 - Spot facing for bronze, iron & steel flanges SP-25 - Standard marking system for valves, fittings, flanges & unions SP-42 - Class 150 corrosion resistant gate, globe, angle, & check valves with flanged & buttweld ends SP-44 - Steel pipeline flanges SP-45 - Bypass & drain connections SP-51 - Class 150/w corrosion resistant cast flanges & flanged fittings SP-53 - Quality standard for steel castings & forgings for valves, flanges, & fittings & other piping components: magnetic particle exam method SP-54 - Quality standard for steel castings for valves, flanges, & fittings and other piping components: radiographic examination method SP-55 - Quality standard for steel castings for valves, flanges other piping components-visual method for evaluation of surface irregularities SP-60 - Connecting flange joint between tapping sleeves & tapping valves SP-61 - Pressure testing of steel valves SP-65 - High pressure chemical industry flanges & threaded stubs for use with lens gaskets SP-67 - Butterfly valves SP-69) - ANSI/MSS edition pipe hangers & supports, selection & application SP-70 - Cast iron gate valves, flanged & threaded ends SP-71 - Gray iron swing check valves, flanged & threaded ends SP-72 - Ball valves with flanged or butt-welding ends for general service SP-79 - Socket-welding reducer inserts SP-81 - Stainless steel, bonnetless, flanged knife gate valves SP-82 - Valve pressure testing methods SP-84 - Valves - socket welding & threaded ends SP-85 - Cast iron globe & angle valves, flanged & threaded ends SP-86 - Guidelines for metric data in standards for valves, flanges, fittings & actuators SP-88 - Diaphragm valves SP-91 - Guidelines for manual operation of valves SP-92 - MSS valve user guide SP-93) - Quality standard for steel castings & forgings for valves, flanges & fittings & other piping components- liquid penetrant exam method SP-94 - Quality standard for ferritic & martensitic steel castings for valves, flanges, & fittings and others piping components - ultrasonic exam method SP-96 - Guidelines on terminology for valves & fittings SP-98 - Protective coatings for the interior of valves, hydrants, & fittings SP-99 - Instrument valves SP-101 - Part-turn valve actuator attachment-flange and driving component dimensions & performance characteristics SP-102 - Multi-turn valve actuator attachment: flange and driving component dimensions & performance characteristics SP-110 - Ball valves threaded, socket-welding, solder joint, grooved, & flared ends SP-117 - Bellows seals for globe & gate valves SP-118 - Compact steel globe and check valves-flanged, flangeless, threaded & welding ends (chemical & petroleum refinery service) SP-120 - Flexible graphite packing system for rising stem steel valves (design requirements) SP-121 - Qualification testing methods for stem packing for rising stem steel valves 137

Terms & Conditions TERMS & CONDITIONS Quotation Validity This quotation is valid for 30 days from the date quotation is sent. Validity on special metals, including Stainless Steel, is 14 days from the date the quotation is sent. All products offered from stock are subject to prior sale. Shipments All items quoted are Ex-Works / FOB our Dock in Santa Fe Springs, CA - West Coast USA. The seller fulfills the obligation to deliver when the goods are made available at the seller s premises. The seller agrees (on the seller s premises) to load the items on the buyers scheduled mode of transportation. The equipment quoted shall be packed in accordance with seller s standard packing procedure. Any additional packaging requesting by the buyer is the responsibility of the buyer, unless otherwise agreed to in writing by the seller. Shipments may be billed either third party billing to the buyer or freight collect. Shipment dates offered above are forecasted delivery lead times and are estimated from the date payment terms (acceptable to seller) are established, clarification is received on all technical information, and resolution of customer s written approval of drawings is received (when required). Force Majeure If in the case of an act of God, war, riot, fire, explosion, flood, or any other circumstances of whatsoever nature which are beyond the control of the seller and which in any way affect the ability of the seller to fulfill its delivery obligations, the delivery is hindered, impeded, or delayed the seller shall be exonerated from all responsibilities and reserves the right to postpone the delivery beyond the original schedule. Payment terms All terms are to be negotiated. Credit cards accepted (Master Card, Visa, American Express). Purchase Orders All buyer s purchase orders supplied to the seller are to be written in the English language. Prices All prices quoted are in USD as per the preceding pricing schedule. The minimum order value is $5,000.00 (five thousand dollars), unless otherwise agreed to by seller. If for some reason any items are changed or additions to the order required, seller reserves the right to adjust prices accordingly. All sales are subject to approval of seller s credit department. If buyer fails to meet the agreed upon and established commercial terms of the contract, the seller may with-hold all subsequent deliveries until such time that the original commercial terms of the contract have been met by the buyer (or subsequent commercial terms have been agreed upon by the seller with the buyer). Intellectual Property All specifications, illustrations, drawings, certificates, and other particulars supplied by seller remain the intellectual property of the seller and should not be disclosed to any third party without the prior written consent of seller. Warranty All seller s products are guaranteed against defects in workmanship for a period of twelve (12) months after being placed in service, but not exceeding eighteen (18) months after shipment, when products are properly installed per seller specifications and used within the service and pressure range for which they were manufactured. Full risk of loss shall pass to the buyer upon delivery Ex-works, or destination port in case of CIF. This guarantee is limited to the replacement of any valve parts/components found to be defective either in material or workmanship. This guarantee does not extend to costs of labor, freight, or any other consequential charges. The unauthorized use of third party components and workmanship in seller s products voids this warranty. Limitation of Liability The liability of the seller under this agreement or with respect to any products supplied or services performed pursuant to this agreement, whether in contract, in tort, in strict liability or otherwise, shall not exceed the purchase price paid by the buyer with respect therto. In no event will the seller be liable in contract, in tort, in strict liability or otherwise for any special, indirect, incidental, or consequential damages. This is including but not limited to loss of anticipated profits or revenues, loss of use, non-operation or increased expense of operation of equipment, cost of capital, or claims from customer or buyer for failure or delay in achieving anticipated profits or products. Cancellation No contract may be canceled by the buyer except upon written notice to seller and upon payment to seller of all costs incurred by the contract arising out of, or in connection with, the contract. Export of goods covered hereby is subject to United States Customs Control. Standard stocking items will be subject to a twenty-five percent (25%) restocking and/or cancellation charge. Non-standard stocking items will be subject to a one-hundred percent (100%) restocking and/or cancellation charge. Cancellation Charge The following indicates the rates of cancellation charge of contract value for project manufactured items and/or special engineered items at various stages of production: Time of cancellation: Order Acknowledgement and prior to Engineering engagement. Cancellation Charge: 10% Time of cancellation: After start of engineering but prior to release to production. Cancellation Charge: 30% Time of cancellation: After release to production but prior to completion of fabrication. Cancellation Charge: 80% Time of cancellation: After completion of fabrication. Cancellation Charge: 100% Return of Goods No product shall be returned to seller without written authorization and shipping instructions having been obtained from seller. Products authorized for returns are to be shipped freight pre-paid to the FOB manufacturing point, unless otherwise notified, and are subject to seller s standard re-stocking fees. Documentation MTR s are available at no charge upon request. The seller s standard document package is per ISO 10474 3.1B requirements. Additional requested documentation is subject to charge. Inspection The customer or his authorized representative may, with four (4) weeks prior notice given to seller, visually inspect products manufactured by seller. Such seller approved inspections will be carried out in accordance with seller s standard or seller approved customer inspection procedures. If any inspection or documentation requested by the customer is over and beyond the scope and criteria initially agreed to by the seller, any costs incurred by conducting such inspection or preparation of special documents shall be paid by the buyer prior to release of the items for shipment. Witness Hydro-Testing Witness hydro-testing is available at a cost. A scope of buyers inspection request is to be provided to seller at order placement. Late notice of such requested inspection is subject to additional costs. The cost associated with such witness hydro request is to be agreed on prior to any such testing taking place. Payment of this type of testing to be negotiated. Additionally, any costs associated with a third party inspector will not be at the sellers expense. 138

13903 Maryton Avenue Santa Fe Springs, CA 90670 Phone: 800.554.6421 Fax: 562.356.2849 www.scvvalves.com Email: sales@scvvalve.com MANUFACTURING FACILITY SCV SALES AND PROJECT OFFICE Friendswood, TX 77546 Phone: 281.482.4728 Fax: 281.482.9728 Email: sales@scvvalve.com