Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and standard flanges ensure short delivery time and lowest cost of ownership. Field proven extended service life, delivered by a robust but simple rotating disc and bean design. Low life cycle costs resulting from improved resistance to corrosive and/or abrasive production fluids. Ease of maintenance and inspection, facilitated by removal of limited internals while valve remains in service. Operational confidence and safety, guaranteed by repeatable 100% shut-off to lass V SME FI-70. Operational reliability with the capability of handling high pressure drops and delivering precise v values. ontrolled environmental impact governed by reduced effects of noise and vibration. Improved pressure recovery performance factor delivered by the unique bean and disc design. General application The unique rotating disc choke valves have been designed for the upstream segment of the oil and gas market, excelling in applications with high differential pressure and abrasive fluids, including production, high pressure separators and well injection and fracturing applications. They are used in: Oil and gas production Level control valve lowdown valve Water injection Steam injection Gas injection Fracturing Handling drilling fluids Handling slurry Gas lift valve Technical data ody material: ISI 4130 onnet type: olted ody rating: 6000 psig onnections: Flange, hub, thread and butt weld Pressure range: SME 150 / 2500 api 2000 / 5000 Temperature range: -46 to +250-51 to +482 F ody size: NPS 1 to 3 End connections: NPS 1 to 6 Leakage class: lass V acc. SME FI-70-2 Emerson.com/Finalontrol 2017 Emerson. ll rights reserved. VTDS-03222-US 15/03
Model SV (ngle ody) Product overview The choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging oil and gas applications as the industry copes with extreme operating conditions and remote operating environments. The SV model is designed as an angle body configuration and is available from NPS 1 to NPS 3 body sizes, incorporating engineered rotating disc trim technology which minimizes wear while maximizing controllability and guaranteeing positive shut-off service. Our choke valve range is highly versatile and is designed with an ISO top flange for easy automation. The forged standardized bodies ensure a high body integrity. The standardized forged body and standard flanges ensure short delivery time and lowest cost of ownership. Flanges SME flanges can be delivered with: Raised face, stock finish Raised face, smooth finish RTJ grooves Dimensions are given in mm, weights are approximate in kgs of bare valve. Other sizes are available on request. Standard end-to-end dimensions are available. On request, the build-in dimensions can be modified to customer specification. Valve specification Valve model ody type ody rating Inlet connection Outlet connection onnet type ody/bonnet material Stem material Trim material Flow charateristic Seat tightness SV Right angle 425 barg / 6000 psig See dimension tables See dimension tables olted See "material options" Duplex (standard) Tungsten carbide Linear lass V Protective bushing Materials Temperature class PU -29 / 121-20 / 250 F LU -46 / 121-51 / 250 F Turning fork Front disc ean ertification level PSL 1 PSL 2 PSL 3 Materials PI 6 material class DD EE ody ISI 4130 ISI 4130 ISI 4130 ISI 4130 onnet ISI 4130 ISI 4130 ISI 4130 ISI 4130 Stem Duplex Duplex Duplex Duplex olting STM 320 L7M STM 320 L7M STM 320 L7M STM 320 L7M Front disc Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide ean Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide 2
Model SV (ngle ody) Standard dimensions and end connections 1 body size onnection ±2 ±2 Weight type lass mm inch mm inch mm inch kg lbs. NPS 1 SME 300 RF 171 6.73 222 8.74 183 7.20 37 82 (DN 25) SME 600 RF 178 7.01 229 9.02 183 7.20 37 82 SME 600 RTJ 177 6.98 228 8.99 183 7.20 37 82 SME 900 RF 189 7.44 240 9.45 183 7.20 43 95 SME 900 RTJ 188 7.42 239 9.42 183 7.20 43 95 SME 1500 RF 189 7.44 240 9.45 183 7.20 44 96 SME 1500 RTJ 188 7.42 239 9.42 183 7.20 44 96 SME 2500 RTJ 204 8.05 255 10.05 183 7.20 47 103 NPS 2 SME 300 RF 179 7.05 237 9.33 183 7.20 42 92 (DN 50) SME 600 RF 189 7.44 247 9.72 183 7.20 44 97 SME 600 RTJ 190 7.48 248 9.76 183 7.20 44 97 SME 900 RF 218 8.58 276 10.87 183 7.20 59 130 SME 900 RTJ 219 8.62 277 10.90 183 7.20 59 130 SME 1500 RF 218 8.58 276 10.87 183 7.20 60 131 SME 1500 RTJ 219 8.62 277 10.90 183 7.20 60 131 SME 2500 RTJ 244 9.60 302 11.89 183 7.20 75 164 NPS 3 SME 300 RF 189 7.44 247 9.72 183 7.20 49 109 (DN 80) SME 600 RF 199 7.83 257 10.12 183 7.20 52 116 SME 600 RTJ 200 7.87 258 10.15 183 7.20 52 116 SME 900 RF 218 8.58 276 10.87 183 7.20 66 146 SME 900 RTJ 219 8.62 277 10.90 183 7.20 66 146 SME 1500 RF 233 9.17 291 11.46 183 7.20 79 173 SME 1500 RTJ 234 9.21 292 11.49 183 7.20 79 173 SME 2500 RTJ 287 11.28 345 13.56 183 7.20 123 270 2 1 /16" PI 2000 190 7.48 248 9.76 183 7.20 45 100 PI 3000 219 8.61 277 10.89 183 7.20 59 130 PI 5000 219 8.60 277 10.89 183 7.20 60 131 3 ⅛" PI 2000 200 7.87 258 10.16 183 7.20 54 119 PI 3000 219 8.60 277 10.89 183 7.20 65 143 PI 5000 234 9.23 292 11.51 183 7.20 80 175 3
Model SV (ngle ody) Standard dimensions and end connections 2 body size onnection ±2 ±2 Weight type lass mm inch mm inch mm inch kg lbs. NPS 2 SME 300 RF 199 7.83 257 10.12 221 8.70 63 138 (DN 50) SME 600 RF 209 8.23 267 10.51 221 8.70 65 142 SME 600 RTJ 210 8.26 268 10.55 221 8.70 65 142 SME 900 RF 238 9.37 296 11.65 221 8.70 79 174 SME 900 RTJ 239 9.41 297 11.69 221 8.70 79 174 SME 1500 RF 238 9.37 296 11.65 221 8.70 80 175 SME 1500 RTJ 239 9.41 297 11.69 221 8.70 80 175 SME 2500 RTJ 264 10.39 322 12.67 221 8.70 95 209 NPS 3 SME 300 RF 209 8.23 267 10.51 221 8.70 70 155 (DN 80) SME 600 RF 219 8.62 277 10.91 221 8.70 73 161 SME 600 RTJ 220 8.66 278 10.94 221 8.70 73 161 SME 900 RF 238 9.37 296 11.65 221 8.70 87 191 SME 900 RTJ 239 9.41 297 11.69 221 8.70 87 191 SME 1500 RF 253 9.96 311 12.24 221 8.70 99 218 SME 1500 RTJ 254 10.00 312 12.28 221 8.70 99 218 SME 2500 RTJ 307 12.07 365 14.35 221 8.70 143 315 NPS 4 SME 300 RF 215 8.46 283 11.14 221 8.70 79 174 (DN 100) SME 600 RF 238 9.37 306 12.05 221 8.70 93 205 SME 600 RTJ 239 9.41 307 12.08 221 8.70 93 205 SME 900 RF 250 9.84 318 12.52 221 8.70 105 231 SME 900 RTJ 251 9.88 319 12.56 221 8.70 105 231 SME 1500 RF 260 10.24 328 12.91 221 8.70 121 267 SME 1500 RTJ 261 10.27 329 12.95 221 8.70 121 267 SME 2500 RTJ 330 13.00 398 15.67 221 8.70 185 408 2 1 /16" PI 2000 210 8.27 268 10.55 221 8.70 66 146 PI 3000 239 9.39 297 11.68 221 8.70 80 177 PI 5000 239 9.39 297 11.67 221 8.70 80 177 3⅛" PI 2000 220 8.66 278 10.94 221 8.70 75 164 PI 3000 239 9.39 297 11.67 221 8.70 86 190 PI 5000 254 10.02 312 12.30 221 8.70 100 221 4 1 /16" PI 2000 239 9.41 307 12.09 221 8.70 93 204 PI 3000 251 9.89 319 12.57 221 8.70 104 230 PI 5000 261 10.27 329 12.94 221 8.70 122 269 4
Model SV (ngle ody) Standard dimensions and end connections 3 body size onnection ±2 ±2 Weight type lass mm inch mm inch mm inch kg lbs. NPS 3 SME 300 RF 249 9.78 342 13.44 305 12.01 168 369 (DN 80) SME 600 RF 259 10.18 352 13.84 305 12.01 171 376 SME 600 RTJ 259 10.21 352 13.87 305 12.01 171 376 SME 900 RF 278 10.93 371 14.59 305 12.01 185 407 SME 900 RTJ 278 10.96 371 14.62 305 12.01 185 407 SME 1500 RF 293 11.52 386 15.18 305 12.01 197 433 SME 1500 RTJ 293 11.55 386 15.21 305 12.01 197 433 SME 2500 RTJ 346 13.62 439 17.28 305 12.01 241 530 NSP 4 SME 300 RF 255 10.02 353 13.88 305 12.01 178 392 (DN 100) SME 600 RF 278 10.93 376 14.78 305 12.01 192 423 SME 600 RTJ 278 10.96 376 14.82 305 12.01 192 423 SME 900 RF 290 11.40 388 15.26 305 12.01 204 450 SME 900 RTJ 290 11.43 388 15.29 305 12.01 204 450 SME 1500 RF 300 11.79 398 15.65 305 12.01 220 485 SME 1500 RTJ 300 11.83 398 15.69 305 12.01 220 485 SME 2500 RTJ 370 14.55 468 18.41 305 12.01 284 626 NPS 6 SME 300 RF 268 10.53 378 14.86 305 12.01 197 434 (DN 150) SME 600 RF 293 11.52 403 15.85 305 12.01 229 505 SME 600 RTJ 293 11.55 403 15.88 305 12.01 229 505 SME 900 RF 316 12.42 426 16.75 305 12.01 258 568 SME 900 RTJ 316 12.46 426 16.79 305 12.01 258 568 SME 1500 RF 347 13.64 457 17.97 305 12.01 303 667 SME 1500 RTJ 349 13.74 459 18.07 305 12.01 303 667 SME 2500 RTJ 454 17.88 564 22.21 305 12.01 501 1103 3⅛" PI 2000 260 10.22 353 13.88 305 12.01 173 380 PI 3000 278 10.94 371 14.61 305 12.01 184 405 PI 5000 294 11.57 387 15.23 305 12.01 198 435 4 1 /16" PI 2000 279 10.96 377 14.82 305 12.01 193 425 PI 3000 291 11.46 389 15.31 305 12.01 204 450 PI 5000 300 11.82 398 15.68 305 12.01 222 489 7 1 /16" PI 2000 295 11.59 405 15.93 305 12.01 233 513 PI 3000 316 12.44 426 16.78 305 12.01 258 568 PI 5000 350 13.76 460 18.09 305 12.01 315 693 5
Model SV (ngle ody) Orifice diameters and v values 1" body (mm) v v 6.5 1" valve characteristics Orifice 8 ean size 21 Max 2.6 Max K 2.3 6.0 12.5 32 6.5 5.6 5.5 5.0 4.5 4.0 v 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 ctive turning angle % 12.5 mm 8 mm Orifice diameters and v values 2" body Orifice (mm) ean size Max v Max K v 18 45 13 11.5 25 64 27 23.4 v 27 24 21 18 15 12 9 6 3 0 2" valve characteristics 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 ctive turning angle % 25 mm 18 mm Orifice diameters and v values 3" body Orifice (mm) ean size Max v Max K v 35 88 50 43.3 50 128 103 89.2 100 90 80 70 60 3" valve characteristics v 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 ctive turning angle % 35 mm 50 mm 6
Model SV (ngle ody) Pos. no Parts 1 ody 2 ean 3 Seal body-bonnet 4 Front disc 5 earing 6 Protecting bush 7 Turning fork 8 Stem seal 9 Seal body-bonnet 10 Spring 11 earing 12 Studs and nuts 13 earing 14 earing 15 onnet 16 onnet shaft 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ctuation options Manual Pneumatic Hydraulic Electric Pneumatic stepping Hydraulic stepping Electro-hydraulic Other actuator available upon request Handwheel mounting position. Optional and are also possible. 7
2017 Emerson. ll rights reserved. 8