SERIE GENIUS Frontal loader Lift capacity Pivot lift (m) Power (Hp) Genius 1000 1000 3,50 60-80 450 Genius 1500 1500 3,90 75-100 480 Genius 2000 2000 4,15 100-125 580 Genius 2200 2200 4,20 125-160 650 Mechanical self-levelling; Double articulation of the terminal part; Quick fastening system for end-tools; Quick fastening system of the tractor; Pivots mounted on wear-resistant interchangeable bushings; Parking feet; Anchorage to tractor back bridge; Side-anchorage to tractors equipped with front bumper; OPTIONAL EQUIPMENT Description () GN 100 GN 101 GN 102 Hydraulic valve with joystick and distance controls; Connection to the tractor hydraulic valve through taps; Auxiliary load sensis valve with distance controls;
SERIE GENIUS TOP Frontal loader Lift capacity Pivot lift (m) Power (Hp) Genius Top 1000 1000 3,50 60-80 470 Genius Top 1500 1500 3,90 75-100 500 Genius Top 2000 2000 4,15 100-125 600 Genius Top 2200 2200 4,20 125-160 670 Mechanical self-levelling; Double articulation of the terminal part; Quick fastening system for the attachments; Quick fastening system to mount the loader on tractors; Pivots mounted on wear-resistant interchangeable bushings; Parking feet; Anchorage to tractor back bridge; Side-anchorage to tractors equipped with front bumper; Valve with joystick and distance controls or auxiliary load sensis valve; Shock absorber system; Multiple connection a 4 ways; Third hydraulic way;
SERIE GENIUS - GENIUS TOP IMPLEMENTS ROUND BALE AND SQUARE BALE FORK Description () GN 103 GN 104 GN 105 Round bale fork with two tips; Square bale fork with three tips; Square bale fork with expulsion device; MANURE FORK Length GN 106 1200 7 GN 107 1400 8 GN 108 1600 9 GN 109 1800 10 GN 110 2000 11 GN 111 2100 12 GN 112 2200 13 N tips () MANURE FORK WITH RETAINER Length GN 113 1600 9 GN 114 2000 11 GN 115 2200 13 N tips ()
EARTH BUCKET Capacity (m 3 ) Length GN 116 0,33 1500 1000 GN 117 0,37 1700 1000 GN 118 0,39 1800 1000 GN 119 0,44 2000 1000 Model Genius () GN 120 0,64 2000 1500-2000-2200 GN 121 0,68 2100 1500-2000-2200 GN 122 0,71 2200 1500-2000-2200 GN 123 0,74 2300 1500-2000-2200 GN 124 0,77 2400 1500-2000-2200 EARTH BUCKET WITH TEETH Capacity (m 3 ) Length GN 125 0,33 1500 1000 GN 126 0,37 1700 1000 GN 127 0,39 1800 1000 GN 128 0,44 2000 1000 Model Genius () GN 129 0,64 2000 1500-2000-2200 GN 130 0,68 2100 1500-2000-2200 GN 131 0,71 2200 1500-2000-2200 GN 132 0,74 2300 1500-2000-2200 GN 133 0,77 2400 1500-2000-2200 CEREAL BUCKETS WITH WEAR-RESISTANT BLADE Capacity (m 3 ) Length GN 134 0,98 2000 GN 135 1,03 2100 GN 136 1,08 2200 GN 137 1,13 2300 GN 138 1,18 2400 ()
FRONT LOADERS EXTENSIONS Length Extension Length extension GN 139 800 / / GN 140 1000 / / GN 141 800 manual 800 GN 142 800 hydraulic 800 GN 143 1000 hydraulic 1000 () IMPLEMENTS Description () GN 144 Round bale grab fork; GN 145 Pallet fork; GN 146 Side shift for pallet fork; GN 147 Log fork with hydraulic grab; GN 148 Log fork with hydraulic grab a two tips semi-industrial ;
HYDRAULIC IMPLEMENTS SERIE GENIUS-GENIUS TOP GN 149 GN 150 GN 151 GN 152 GN 153 GN 154 GN 155 GN 156 GN 157 GN 158 GN 159 GN 160 GN 161 GN 162 GN 163 Description Auxiliary valve with joystick and distance controls; Load sensis auxiliary valve with distance controls; Three lever auxiliary valve; Four lever auxiliary valve; Five lever auxiliary valve; Single distance control; Third hydraulic way; Fourth hydraulic way; Fifth hydraulic way; Independent 22 lt. hydraulic pump with tank; Independent 40 lt. hydraulic pump with tank; Four way connector; Six way connector; Eight way connector; Nitrogen accumulator with tap; ATTACHMENTS GN 164 GN 165 GN 166 Description Bucket tip Counter weight box Cover for bucket tips
SERIE PFP - PF Frontal loader Lift capacity Pivot lift (m) Power (Hp) PF 100 150 1,80 / 2,00 15-35 180 PFP 300 300 2,30 30-35 250 PFP 400 450 2,40 35-55 330 PFP 500 580 2,80 45-70 400 Mechanical self-levelling (all models except PF 100); Double articulation of the terminal part (all models except PF 100); Quick fastening system for end-tools; (all models except PF 100); Quick fastening system of the tractor; Parking feet; Anchorage to the back bridge of the tractor; Side-anchorage to tractors equipped with front bumper; OPTIONAL EQUIPMENT PF 101 PF 102 Description Hydraulic valve with joystick and distance controls for PF loaders; Hydraulic valve with joystick and distance controls for PFP loaders;
SERIE PFP PF IMPLEMENTS ROUND BALE FORK Description () PF 103 Round bale fork with two tips; MANURE FORK Length PF 104 1000 7 PF 105 1200 8 PF 106 1400 9 PF 107 1600 10 N tips () EARTH BUCKET Capacity (m 3 ) Length PF 108 0,19 1200 PF 109 0,22 1400 PF 110 0,24 1500 PF 111 0,29 1800 () FRONT LOADERS EXTENSIONS Length Extension Length extension PF 112 800 / / PF 113 1000 Hydraulic 800 ()
PALLET FORK Description () PF 114 Pallet fork; HYDRAULIC IMPLEMENTS SERIE PFP-PF PF 115 PF 116 PF 117 PF 118 PF 119 PF 120 PF 121 PF 122 PF 123 Description Auxiliary valve with joystick and distance controls for PF; Auxiliary valve with joystick and distance controls for PFP; Three lever auxiliary valve; Four lever auxiliary valve; Five lever auxiliary valve; Single distance control; Third hydraulic way; Fourth hydraulic way; Fifth hydraulic way;
SERIE LS Snowplough Total width Minimum working width Flap width Distance from the attack working angle LS 2600 2800 2200 900 1150 40 630 LS 2800 3000 2400 900 1150 40 650 LS 3000 3200 2600 900 1150 40 710 LS 3200 3400 2800 900 1150 40 750 LS 3400 3600 3000 900 1150 40 850 LS 3600 3800 3200 900 1150 40 870 LS 3800 4000 3400 900 1150 40 940 Two folding sectors; Vertical shock-absorbing springs; Three-point linkage; Hydraulic control to angle the aileron; Steel scraping blade; Lighting system; Antishock valve. OPTIONAL EQUIPMENT Descriptin () LS 100 LS 101 Linkage by plate and counter plate; Auxiliary control valve with joystick,floating and distance controls; LS 102 LS 103 LS 104 LS 105 LS 106 LS 107 LS 108 LS 109 Hydraulic connection to the tractor with tractor hydraulic valve; Anchorage to 70/90 Hp tractor and mounting in our site; Anchorage to 95/185 Hp tractor and mounting in our site; Hydraulic system for the breaking of the ice; Rubber scraping blade (linear metre); Two wheels to adjust the height level of the blade; Two steel slides to adjust the height level of the blade; Hydraulic power pack with push-button panel;
SERIE LS - A Snowplough Total width Minimum working width Flap width Distance from the attack working angle LS-A 2600 2800 2200 1000 1150 40 660 LS-A 2800 3000 2400 1000 1150 40 680 LS-A 3000 3200 2600 1000 1150 40 740 LS-A 3200 3400 2800 1000 1150 40 780 LS-A 3400 3600 3000 1000 1150 40 880 LS-A 3600 3800 3200 1000 1150 40 900 LS-A 3800 4000 3400 1000 1150 40 970 Two folding sectors; Vertical shock-absorbing springs; Three-point linkage; Hydraulic control to angle the aileron; Steel scraping blade; Lighting system; Antishock valve; Blade of additional height of the aileron OPTIONAL EQUIPMENT Description () LS 110 LS 111 LS 112 LS 113 LS 114 LS 115 LS 116 LS 117 LS 118 LS 119 Linkage by plate and counter plate; Auxiliary control valve with joystick,floating and distance controls; Hydraulic connection to the tractor with tractor hydraulic valve; Anchorage to 70/90 Hp tractor and mounting in our site; Anchorage to 95/185 Hp tractor and mounting in our site; Hydraulic system for the breaking of the ice; Rubber scraping blade (linear metre); Two wheels to adjust the height level of the blade; Two steel slides to adjust the height level of the blade; Hydraulic power pack with push-button panel;
SERIE LS - AV Snowplough Total width Minimum working width Flap width Distance from the attack working angle LS-AV 2600 2800 2200 950 1150 40 670 LS-AV 2800 3000 2400 950 1150 40 690 LS-AV 3000 3200 2600 950 1150 40 750 LS-AV 3200 3400 2800 950 1150 40 790 LS-AV 3400 3600 3000 950 1150 40 890 LS-AV 3600 3800 3200 950 1150 40 910 LS-AV 3800 4000 3400 950 1150 40 980 Two folding sectors; Vertical shock-absorbing springs; Three-point linkage; Hydraulic control to angle the aileron; Steel scraping blade; Lighting system; Antishock valve; Splash-proof upper extension of the blade, ideal for high speed clearing. OPTIONAL EQUIPMENT Description () LS 120 LS 121 LS 122 LS 123 LS 124 LS 125 LS 126 LS 127 LS 128 LS 129 Linkage by plate and counter plate; Auxiliary control valve with joystick,floating and distance controls; Hydraulic connection to the tractor with tractor hydraulic valve; Anchorage to 70/90 Hp tractor and mounting in our site; Anchorage to 95/185 Hp tractor and mounting in our site; Hydraulic system for the breaking of the ice; Rubber scraping blade (linear metre); Two wheels to adjust the height level of the blade; Two steel slides to adjust the height level of the blade; Hydraulic power pack with push-button panel;
SERIE LSM Snowplough Total width Minimum working width Flap width Distance from the attack working angle LSM 1800 1900 1500 790 1050 35 420 LSM 2000 2100 1700 790 1050 35 450 LSM 2200 2300 1900 790 1050 35 480 LSM 2500 2600 2200 790 1050 35 510 LSM 2700 2800 2400 790 1050 35 540 LSM 2900 3000 2600 790 1050 35 590 Monolithic aileron; Vertical shock-absorbing springs; Three-point linkage; Hydraulic control to angle the aileron; Steel scraping blade; Lighting system; Antishock valve; OPTIONAL EQUIPMENT Description () LSM 100 LSM 101 LSM 102 LSM 103 LSM 104 LSM 105 LSM 106 LSM 107 LSM 108 Linkage by plate and counter plate; Auxiliary control valve with joystick,floating and distance controls; Hydraulic connection to the tractor with tractor hydraulic valve; Anchorage to 40/60 Hp tractor and mounting in our site; Anchorage to 70/90 Hp tractor and mounting in our site; Rubber scraping blade (linear metre); Two steel slides to adjust the height level of the blade; Two wheels to adjust the height level of the blade; Hydraulic power pack with push-button panel;
SERIE LSP Snowploughs Total width Minimum working width Flap width Distance from the attack working angle LSP 1200 1200 900 520 720 35 125 LSP 1400 1400 1100 520 720 35 140 LSP 1600 1600 1300 520 720 35 150 LSP 1800 1800 1500 520 720 35 170 LSP 2000 2000 1700 520 720 35 190 LSP 2200 2200 1900 520 720 35 210 Monolithic aileron; Vertical shock-absorbing springs; Three-point linkage; Hydraulic control to angle the aileron; Steel slides to adjust the height level of the blade; Steel scraping blade; OPTIONAL EQUIPMENT Description () LSP 100 LSP 101 LSP 103 LSP 104 LSP 105 Auxiliary control valve with joystick,floating and distance controls; Anchorage to 20/60 Hp tractor and mounting in our site; Rubber scraping blade (linear metre); Two wheels to adjust the height level of the blade; Hydraulic power pack with push-button panel;
SERIE VS - VSB Plough Total width of the wedge blade Working width of the wedge blade Flap width Minimum power (Hp) VSB 2000 2300 2000 900 45 600 VSB 2200 2500 2200 1000 60 650 VSB 2500 2800 2500 1100 75 700 VS 2500 2800 2500 1200 80 750 VS 2800 3100 2800 1300 100 850 VS 3200 3500 3200 1400 130 1100 Antishock valve; Mechanical adjustment of the impact of the scraper blade; Three-point linkage; Wear-resistant side buffer; Hydraulic control to angle the aileron; Lighting system; Steel scraping blade. OPTIONAL EQUIPMENT Description () VS 100 VS 101 VS 102 VS 103 VS 104 VS 105 Linkage by plate and counter plate; Three-lever double-effect control valve with float position; Anchorage to 60/90 Hp tractor and mounting in our site; Anchorage to 100/160 Hp tractor and mounting in our site; Hydraulic power pack with push-button panel; Rubber scraping blade (linear metre);
SERIE DGS Self loading salt spreader Total width Spreading width Length Capacity (m 3 ) DGS 1200 1450 1200 1200 0,60 450 DGS 1600 1850 1600 1200 0,78 550 DGS 2000 2250 2000 1200 0,98 650 DGS 2300 2500 2300 1300 1,10 750 Three-point linkage; Interior crumbling shaft; Valve to adjust the spreading; Lock valve for the loading cylinder; Quick hydraulic clutches.
SERIE DGF Forestal loader moment (KNm) extension (m) workable gradient Rotation angle Capacity of pump (Lt/min) DG 480 F 65 6,00 20 400 50/60 1350 Hydraulically-controlled stabilisers; Hydraulic valve with four lever and two joysticks; Oil tank and oil; Independent hydraulic pump; Linkage system for forest trailers or quick coupling for tractors (female part); Telescopic arm end; Closing of the arm to "Z"; Double rack for rotation; Command post at the up with the seat; Lift capacity at the maximum extension:700 kg. OPTIONAL EQUIPMENT Description () CF 100 CF 101 CF 102 CF 103 CF 104 CF 105 CF 106 Mounting on tractor and quick coupling (male part); Mounting on trailer; Front support for the grab; Servo-assisted proportional hydraulic valve; Log grab DG1500PF; GR465 continuous flow flanged rotor 360 from 4,0 tonnes; Log grab DG1800PFV;
SERIE DGF Forestal loader moment (KNm) extension (m) workable gradient Rotation angle Capacity of pump (Lt/min) DG 380 F 30 5,00 20 400 35-45 1100 Hydraulically-controlled stabilisers; Hydraulic valve with four lever and two joysticks; Oil tank and oil; Independent hydraulic pump; Linkage system for forest trailers or quick coupling for tractors (female part); Telescopic arm end; Closing of the arm to "Z"; Double rack for rotation; Command post at the up with the seat; Lift capacity at the maximum extension:700 kg. OPTIONAL EQUIPMENT Description () CF 107 CF 108 CF 109 CF 110 CF 111 CF 112 CF 113 Mounting on tractor and quick coupling (male part); Mounting on trailer; Front support for the grab; Servo-assisted proportional hydraulic valve; Log grab DG1500PF; GR465 continuous flow flanged rotor 360 from 4,0 tonnes; Log grab DG1800PFV;
SERIE DGF Forestal loader moment (KNm) extension (m) workable gradient Rotation angle Capacity of pump (Lt/min) DG 280 F 25 5,00 20 400 35-45 700 Hydraulically-controlled stabilisers; Hydraulic valve with four lever and two joysticks; Linkage system for forest trailers or three-point linkage; Closing of the arm to "Z"; Telescopic arm end; Command post at the up with the seat; Lift capacity at the maximum extension:400 kg. OPTIONAL EQUIPMENT Description () CF 114 Mounting on tractor; CF 115 Mounting on trailer; CF 116 Front support for the grab; CF 117 Independent hydraulic pump and oil; CF 118 Log grab DG1300PF; CF 119 GR30 continuous flow rotor 360 from 3,0 tonnes; CF 120 Log grab DG1500PF;
SERIE DGF Forestal loader moment (KNm) extension (m) workable gradient Rotation angle Capacity of the pump (Lt/min) DG 180 F 20 4,00 20 400 30 600 Hydraulically-controlled stabilisers; Hydraulic valve with four lever and two joysticks; Linkage system for forest trailers or three-point linkage; Telescopic arm end; Closing of the arm to "Z"; Command post at the up with the seat; Lift capacity at the maximum extension:350 kg. OPTIONAL EQUIPMENT Description () CF 121 Mounting on tractor; CF 122 Mounting on trailer; CF 123 Front support for the grab; CF 124 Independent hydraulic pump and oil; CF 125 Log grab DG1050PF; CF 126 GR10 continuous flow rotor 360 from 1,0 tonnes; CF 127 Log grab DG1300PF; CF 128 GR30 continuous flow rotor 360 from 3,0 tonnes;
SERIE DGF Forestal loader moment (KNm) extension (m) workable gradient Rotation angle Capacity of the pump (Lt/min) DG 120 F 12 3,50 20 400 20 500 Hydraulically-controlled stabilisers; Hydraulic valve with four lever and two joysticks; Linkage system for forest trailers or three-point linkage; Telescopic arm end; Closing of the arm to "Z"; Command post at the up with the seat; Lift capacity at the maximum extension:300 kg. OPTIONAL EQUIPMENT Description () CF 129 CF 130 CF 131 CF 132 CF 133 CF 134 Mounting on tractor; Mounting on trailer; Front support for the grab; Independent hydraulic pump and oil; Log grab DG1050PF; GR10 continuous flow rotor 360 from 1,0 tonnes;
FOREST IMPLEMENTS LOG GRABS Least opening A Grab width B Middle opening C Maximal opening D Capacity max of the grab DG1050PF 60 270 500 1050 700 70 DG1300PF 60 350 600 1300 1500 130 DG1500PF 70 460 600 1500 2000 200 DG2000PF 140 520 900 2000 4000 400 DG1600PFV 70 440 700 1600 2500 250 DG1800PFV 80 440 800 1800 3500 320 CONTINUOUS ROTATION ROTORS 360 Capacity GR 10 1000 10 GR 30 3000 16 GR 46 4500 24 GR 30 PF 3000 22 GR 465 4500 28 GR 603 6000 43
POLYP GRAPPLE FOR SAWN TIMBER A B C D E Tines PP 140 780 1400 1520 780 500 5 130 PP 180 950 1805 1930 1100 645 5 220 MANURE FORK WITH HORIZONTAL CYLINDER A B C D L Tines FLO 400 690 960 510 1400 400 6 110 FLO 500 690 960 510 1400 500 8 130 FLO 650 690 960 510 1400 650 10 145 FLO 800 690 960 510 1400 800 12 165 FLO 950 690 960 510 1400 950 14 185 FLO 1100 690 960 510 1400 1100 16 205 FLOL 450 613 895 465 1185 450 8 90 FLOL 550 613 895 465 1185 550 10 97 FLOL 700 613 895 465 1185 700 12 110
ENGINE HYDRAULIC FOR WEDGE LOG-SPLITTER. pressure (bar) Capacity (l/min) Max torque (danm) Output speed (g/l) drilling () PG 101 220 40-70 200 1,46 500 75 PG 151 220 50-75 250 1,17 600 90 ROTATING WEDGE LOG SPLITTER Diameter A B C () CS 200 200 150 490 850 45 CS 250 250 150 600 975 70 CS 126 Spare tip
SERIE DGR Backhoe Digging depth A Useful unloading height B digging distance C Standard chassis width Bucket Power (Hp) DG50R 1390 1390 2220 1100 200 15-35 280 DG120R 1900 1550 2650 1100 250 40-70 450 DG150R 2100 1750 2900 1500 300 50-80 510 DG200R 2500 2100 3300 1500 300 60-90 600 DG250R 2945 2500 3810 1800 400 70-100 770 DG300R 3315 2895 4345 2000 500 120-180 940 Three-point linkage; 180 arm rotation; Movable frame; Side-shift movement hydraulic block (excluded DG50R); Oil tank and oil; Independent hydraulic pump; Hydraulic valve with two levers and two joysticks; Filter; Seat; Three-point couple; Standard bucket.
ACCESSORI DIGGING BUCKET Lenght Tines Capacity (m 3 ) RT 100 200 2 0,01 RT 101 250 3 0,02 RT 102 300 3 0,03 RT 103 400 4 0,04 RT 104 500 4 0,05 RT 105 800 / 0,07 RT 106 1000 / 0,09 RT 107 1200 / 0,11 RT 108 1500 / 0,14 () SWIVELLING BUCKET Lenght Capacity (m 3 ) RT 109 800 0,07 RT 110 1000 0,09 RT 111 1200 0,11 RT 112 1500 0,14 RT 113 Solenoid valve () DITCHING BUCKET Upper opening Lower opening Height bucket RT 114 700 280 650 RT 115 850 280 650 ()
CLAMSHELL BUCKET WITH HORIZONTAL CYLINDER FOR LOADING AND UNLOADING Capacity (Lt) A B C D L DGBM 35 35 456 624 357 304 305 32 DGBM 50 50 626 894 492 390 330 52 DGBM 90 90 760 1100 585 500 350 85 DGBM 125 125 840 1200 660 523 450 134 DGBM 155 155 840 1200 660 523 550 143 DGBM 175 175 840 1200 660 523 650 152 DGBM 205 205 840 1200 660 523 750 161 DGBM 225 225 840 1200 660 523 850 170 DGBM 320 320 1040 1430 780 565 800 208 DGBM 360 360 1040 1430 780 565 900 220
FORESTRY ATTACHMENTS FOR BACKHOES Description () RT 116 Extension RT 117 Forest hydraulic valve RT 118 Heat exchanger HYDRAULIC ENGINE FOR AUGERS pressure (bar) Capacity (l/min) Max torque (danm) Output speed (g/l) drilling Backhoe weight PG 101 220 40-70 200 1,46 500 75 2500-4000 () PG 151 220 50-75 250 1,17 600 90 2500-4000 AUGER BITS Drilling diameter TV 100 100 TV 150 150 TV 200 200 TV 250 250 ()
CONDITIONS OF SALES PRICES Our company reserves the right to modify the prices shown on this price list at any time, without notice. TECHNICAL SPECIFICATIONS As the technical details shown in this price list are provided as a rough guide, we reserve the right to modify them at any time, without notice. ORDERS Orders imply customers acceptance of these conditions of sales. Any other condition proposed by customers are not considered as valid until our explict acceptance. PAYMENT The payment terms are set by Daniele & Giraudo snc at the time of order. The invoice corresponds to the prices and the conditions of sale which were in force at the time of order. The products won t be delivered without previous acceptance of payment terms. TRANSPORT The prices shown in this price list do not include the freight charges. The goods are insured depending on their estimated value. Customers are kindly requested to check the conditions of products on their arrival. DELIVERY TIMES We generally indicate delivery times as a guide, but we reserve the right to defer them, if need be. GUARANTEE Our products are under guarantee for two years from the delivery date. Potentially defective materials are always replaced and the original parts must be sent back to us. Replacement and freight charges are at the customer s expense. Parts subject to wear and parts modified by the customer are not under guarantee. If any part is not in accordance with the order, it is taken back by Daniele&Giraudo, provided that the customer has not used it, yet.
Daniele & Giraudo s.n.c. Mechanical constructions farm machinery via Levaldigi n 9 12020-Vottignasco-Cuneo-Piemonte-Italy Tel:+39 0171 941020 Fax:+39 0171 941263 www.danieleegiraudo.com danielegiraudo@cheapnet.it