BOLOTA 304
BOLOTA 304 THE COMPANY PRODUCT RANGES SERVICE SAMPLES
INDEX Lever Handles Escutcheons Turn and Release Sets Pull Handles Push Plates and Signage Locks and Latches Cylinders Door Closers Hinges Door Stops Flush and Cylinder Pulls Bolts Pivot and Release Stops Panic Exit Hardware Digital Locks Hat and Coat Hooks Bathroom Accessories Care of Finishes
Digit 5 - Safety Grade 0: Normal use Grade 1: Safety application - to qualify for this grade, handles must have high strength handle-to-plate and plate-to-door fixing and/or handle to spindle fixing, such that they would withstand a person grabbing in order to prevent falling. It is recommended that only Safety Grade 1 furniture is used at the top of cellar steps or other staircases. Digit 1 - Category of Use Grade 1: Medium frequency of use with a high incentive to exercise care and a small chance of misuse, e.g. internal residential doors; Grade 2: Medium frequency of use by people with some incentive to exercise care but where there is some chance of misuse e.g. internal office doors; Grade 3: High frequency of use by public or others with little incentive to exercise care and with a high chance of misuse, e.g. public office doors Grade 4: High frequency of use on doors which are subject to frequent violent use, e.g. football stadiums, oil rigs, barracks, public toilets, etc Digit 6 - Corrosion Resistance Grade 0: No defined corrosion resistance Grade 1: Mild resistance - minimum requirement for internal use Grade 2: Moderate resistance Grade 3: High resistance - minimum requirement for external use Grade 4: Very high resistance - recommended for use in exposed marine atmospheres or very polluted industrial environments. Note: Products intended to develop a natural patina (such as bronze or brass) are not required to comply with any requirements. 1 6-1 0 3 4 A Digit 2 - Durability Grade 6: Medium use - 100,000 cycles Grade 7: High use - 200,000 cycles The tests undertaken to achieve these grades involve the application of additional forces to the door furniture in order to stimulate the conditions of use likely to be experienced in the field. Digit 3 - Test Door Mass No requirement Digit 7 - Security Grade 0: Not approved for use on burglary resistant doors Grade 1: Mild burglary resistance Grade 2: Moderate burglary resistance Grade 3: High burglary resistance Grade 4: Extra high burglary resistance Note: The main requirements include resistance to drilling, close fitting plates or escutcheons to help protect the lock and support the cylinder. They must be resistant to removal from the outside of the door and make provision to minimise the cylinder projection to a maximum of 3mm. Full details of the requirements can be found in BS EN 1906. Digit 4 - Fire Resistance Grade 0: Not approved for use on fire/smoke door assemblies. Grade 1: Suitable for use on fire/smoke door assemblies. Note: A Grade 1 classification means only that the furniture has been designed for use on fire/smoke control doors; the actual fire performance achieved (e.g. fire integrity of 30 minutes on a partially glazed timber door etc.) will be contained in a separate fire test report. Digit 8 - Type of Operation Type A: Spring assisted furniture Type B: Spring loaded furniture Type U: Unsprung furniture
key to symbols FD30 BS EN 1906 GRADE 304 INDUSTRIAL BSS BSS/
BOLOTA 304 Industrial Lever handle length 141mm, Ø19mm Lever projection 65mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Complies with the dimensional requirements of BS8300 VARIATION - Lever on 4mm unsprung rose Bright stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS INDUSTRIAL GRADE 304 BS EN 1906 FD30 6
Industrial Lever handle length 133mm, Ø19mm Lever projection 65mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded VARIATION - Lever on 4mm unsprung rose Bright stainless steel Category of use class 3, EN1906 for BSS use on fire-rated and smoke protection door to BS EN 1634 INDUSTRIAL GRADE 304 BS EN 1906 FD30 7
BOLOTA 304 Lever handle length 132mm Lever projection 71mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 8
Lever handle length 133mm, Ø19mm Lever projection 64mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Complies with the dimensional requirements of BS8300 Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 9
BOLOTA 304 Lever handle length 127mm Lever projection 60mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 10
Lever handle length 125mm, Ø22mm Lever projection 60mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 11
BOLOTA 304 Industrial Lever handle length 125mm, Ø23mm Lever projection 57mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Complies with the dimensional requirements of BS8300 Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 INDUSTRIAL GRADE 304 BS EN 1906 FD30 12
Lever handle length 128mm, Ø19mm Lever projection 65mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded VARIATION - Lever on 4mm unsprung rose Bright stainless steel Category of use class 3, EN1906 for BSS use on fire-rated and smoke protection door to BS EN 1634 INDUSTRIAL GRADE 304 BS EN 1906 FD30 13
BOLOTA 304 Lever handle length 124mm Lever projection 68mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 14
Lever handle length 126mm, Ø20mm Lever projection 62mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 15
BOLOTA 304 Lever handle length 120mm Lever projection 58mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 16
Lever handle length 128mm Lever projection 66mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 17
BOLOTA 304 Lever handle length 132mm, Ø19mm Lever projection 54mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Bright stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS GRADE 304 BS EN 1906 FD30 18
Lever handle length 134mm, Ø22mm Lever projection 67mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Bright stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS GRADE 304 BS EN 1906 FD30 19
BOLOTA 304 Lever handle length 127mm Lever projection 62mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 20
Lever handle length 134mm Lever projection 58mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 GRADE 304 BS EN 1906 FD30 21
BOLOTA 304 Lever handle length 133mm, Ø19mm Lever projection 60mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Dual finish stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS/ GRADE 304 BS EN 1906 FD30 22
Lever handle length 136mm, Ø19mm Lever projection 62mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Dual finish stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS/ GRADE 304 BS EN 1906 FD30 23
BOLOTA 304 Lever handle length 140mm, Ø19mm Lever projection 65mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Dual finish stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS/ GRADE 304 BS EN 1906 FD30 24
Lever handle length 128mm, Ø19mm Lever projection 65mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Dual finish stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS/ GRADE 304 BS EN 1906 FD30 25
BOLOTA 304 Lever handle length 137mm, Ø19mm Lever projection 66mm Rose Ø52mm x 7mm Sprung, Concealed Rose Threaded Dual finish stainless steel Category of use class 3, EN1906 for use on fire-rated and smoke protection door to BS EN 1634 BSS/ GRADE 304 BS EN 1906 FD30 26
AB41-01 AB41-02 PRODUCT CODES - Euro - Keyhole - Blank Industrial Rose Ø52mm x 7mm Concealed fixings G304 stainless steel Also available in 4mm thickness Code: AB42 Dual finish stainless steel Bright stainless steel INDUSTRIAL BSS/ BSS GRADE 304 FD30 27
BOLOTA 304 AB41-05 AB41-06 PRODUCT CODES - Without indicator - With indicator Industrial Rose Ø52mm x 7mm Concealed fixings G304 stainless steel Also available in 4mm thickness Code: AB42 Dual finish stainless steel Bright stainless steel INDUSTRIAL BSS/ BSS GRADE 304 FD30 28
AB41-07 PRODUCT CODE Industrial Lever handle length 60mm, Ø10mm Lever projection 37mm Rose Ø52mm x 7mm Concealed fixings G304 stainless steel Also available in 4mm thickness Code: AB42 Dual finish stainless steel Bright stainless steel GRADE 304 INDUSTRIAL FD30 BSS/ BSS 29
BOLOTA 304 AB50-03 PRODUCT CODES - 150mm long - 225mm long - 300mm long - 425mm long - 450mm long - 600mm long Industrial 19mm diameter 22mm (AB51) and 25mm (AB52) diameters available Grade 304 Bolt through fixing as standard Rose fixings if required code: AB50-1.9A Back to back fixing code: AB50-1.1A Cranked version available Mitred version available AB50 AB51 AB52 Bright stainless steel GRADE 304 INDUSTRIAL FD30 BSS 30
PRODUCT CODES - 300mm centres - 425mm centres - 600mm centres - 1000mm centres - 1200mm centres AB55-01 Industrial 19mm diameter 25mm (AB56) and 32mm (AB57) diameters available Grade 304 Bolt through fixing as standard Back to back fixing code: AB50-1.1A Cranked version available AB55 AB56 AB57 Bright stainless steel INDUSTRIAL BSS GRADE 304 FD30 31
BOLOTA 304 PRODUCT CODES - 375 x 75mm - 500 x 75mm - 700 x 75mm - 375 x 100mm - 500 x 100mm - 700 x 100mm - Kicking Plates Industrial AB71-01 Radius corners as standard 1.5mm thick as standard other thicknesses available Drilled and countersunk Engraved Push Code: AB71 Engraved Pull Code: AB72 Grade 304 Other sizes to order Bright stainless steel BSS INDUSTRIAL 32
PRODUCT CODES - Fire Door Keep Shut - Fire Door Keep Locked - Automatic Fire Door AB81-03 - Keep Clear - Male Pictogram - Female Pictogram - Accessible Toilet Pictogram - Unisex Pictogram - Baby Change Pictogram - Shower Pictogram - Push - Pull Industrial 76mm Diameter 1.5mm thick as standard other thicknesses available Drilled and countersunk Grade 304 Bright stainless steel BSS INDUSTRIAL 33
BOLOTA 304 PRODUCT CODES - Euro Sashlock Case - Euro Deadlock Case - Bathroom Lock Case - Latch Case - Euro Nightlatch Case - Euro Escape Sashlock Case Industrial AB30-01 CE marked Conforms to EN 12209 60mm backset & 72mm centres in line with guidance of BS8300 (Bathroom 78mm centres) Quick reversible latch action Double throw cylinder action Square or radius forend & strike plates Suitable for bolt through fixings lever handles Suitable for sprung lever furniture Box strike plates available Code: AB30-BS 13mm or 25mm rebates available Code: AB30 13 or 25 Single throw deadbolt version available Code: AB29 Bright stainless steel BSS INDUSTRIAL GRADE 304 BS EN 1906 FD30 34
AB31-02 PRODUCT CODES - 63mm Tubular Latch - 76mm Tubular Latch - 76mm Tubular Bathroom AB31-03 - deadbolt Industrial AB31-03 Certifire Conforms to EN 12209 44 and 57mm backset Quick reversible latch action Square or radius forend & strike plates Suitable for bolt through fixing lever handles Suitable for sprung lever furniture Plastic box strike plates 8mm followers 13mm rebates available Code AB31 13 Bright stainless steel BSS INDUSTRIAL GRADE 304 BS EN 1906 FD30 35
BOLOTA 304 PRODUCT CODES - 63mm Bathroom Lock - 76mm Bathroom Lock Industrial Certifire Conforms to EN 12209 44 and 57mm backset Quick reversible latch action Square or Radius forend & strike plates Suitable for bolt through fixing lever handles Suitable for sprung lever furniture Plastic box strike plates Bright stainless steel BSS INDUSTRIAL GRADE 304 BS EN 1906 FD30 36
PRODUCT CODES - 40 or 45mm Single Cylinder - 60 or 70mm Cylinder & Turn - 60 or 70mm Double Cylinder AB15-01 AB15-03 AB15-02 - Rim Cylinder Industrial 6 pin security restricted profile Patented until 2029 Medium to high security applications EN1303 Grade 6 security & durability Drill & pick protected Comprehensive range of cylinder sizes available (Standard sizes stated) Sophisticated master keying capability Classroom function available Anti-barricade function available Construction keying available VARIATION - High security system 10-pin flat key cylinder BSS Bright stainless steel INDUSTRIAL GRADE 304 BS EN 1303 FD30 37
BOLOTA 304 PRODUCT CODES - EN 2-4 Overhead Door Closer with Backcheck -EN 2-6 Overhead Door Closer with Backcheck -EN 2-5 Overhead Door Closer with Backcheck and Delayed Action - EN 4 Electro-magnetic Hold Open Door Closer - EN 4 Electro-magnetic Free Swing Door Closer Industrial AB20-02 Fully compliant with EN1154 CE marked Simple installation instructions Capable of meeting BS8300 requirements Closer cover secured by spring clips for quick installation and no visible fixings Fully adjustable for closing speed, latch action and backcheck. Radius or Square cover options Silver sprayed (SES) Bright stainless steel SES BSS INDUSTRIAL CE MARKED BS EN 1154 FD30 38
PRODUCT CODES -EN 2-4 Cam Action Door Closer with Backcheck AB20-04 Square Cover -EN 2-5 Cam Action Door Closer with Backcheck and Delayed Action - EN 3-5 Electro-magnetic Hold Open Door Closer Industrial Track arm closer Fully compliant with EN1154 CE marked Simple installation instructions Capable of meeting BS8300 requirements Closer cover secured by spring clips for quick installation and no visible fixings Fully adjustable for closing speed, latch action and backcheck. Radius or square cover options Push or pull side application AB20-04 Radius Cover Silver sprayed (SES) Bright stainless steel INDUSTRIAL SES BSS CE MARKED BS EN 1154 FD30 39
BOLOTA 304 PRODUCT CODES - 102 x 76 x 3mm (Grade 13) - 102 x 102 x 3mm (Grade 13) - 76 x 67 x 2.5mm (Grade 11) - 76 x 51 x 2mm (Grade 7) Industrial AB10-01 CE marked BS EN1935 Grade 13 Square or radius corners Grade 304 Intumescent hinge pads Code: AB10-HP Bright stainless steel AB10-03 BSS INDUSTRIAL CE MARKED BS EN 1935 FD30 40
PRODUCT CODES - 102 x 76 x 3mm (Grade 13) - 102 x 89 x 3mm (Grade 13) - 102 x 102 x 3mm (Grade 13) - 125 x 102 x 3mm (Grade 13) - 102 x 76 x 3mm (Grade 14) AB10-07 Industrial CE marked BS EN1935 Grade 13 Square or radius corners Grade 304 Intumescent hinge pads Code: AB10-HP Bright stainless steel AB10-09 BSS INDUSTRIAL CE MARKED BS EN 1935 FD30/60 41
BOLOTA 304 PRODUCT CODES - Large Floor Mounted - Standard Floor Mounted - Pedestal - Wall Door Stop AB61-04 - on Rose (91mm) - Wall Door Stop AB61-05 - without Rose (73mm) - Wall Door Stop AB61-06 - on Rose (76mm) - Wall Door Stop AB61-06 - on Rose (102mm) AB61-01 AB61-02 Industrial Bright stainless steel AB61-03 AB61-04 AB61-05 42
PRODUCT CODES - 100 x 50mm Flush Pull - 90mm Diameter Flush Pull - 78 x 44mm Euro Cylinder Pull Face Fixed - 85 x 50mm Euro Cylinder Pull Bolt Through Fixings AB55-01 Industrial AB55-02 Bright stainless steel AB55-03 43
BOLOTA 304 LEVER ACTION FLUSH BOLTS - 150 x 20mm - 200 x 20mm - 305 x 20mm - 450 x 20mm - 609 x 20mm - 904 x 20mm AB60-01 SURFACE MOUNTED DOOR BOLTS SCP & PCP - 102 x 35mm - 150 x 35mm - 202 x 35mm - 254 x 35mm SOCKETS - Easy Clean Floor Socket - Dust Excluding Socket Industrial AB60-08 Bright stainless steel Satin chrome plated (SCP) Polished chrome plated (PCP) AB60-15 44
PRODUCT CODES - Thrust Bearing Pivot Set - Emergency Release AB10-200 - Door Stop Industrial Stainless steel construction Phospher bronze thrust bearing Square or radius corners Maximum door weight: 80Kg Radius version available Code: AB10-100R AB10-100 AB10-200 45
BOLOTA 304 PRODUCT CODES - Standard Single Panic Bolt - Standard Double Panic AB60-02 - Bolt - Rebated Doors - Standard Single Bar Panic AB60-03 - Latch - Push Pad Panic Latch - Outside Access Device AB60-05 - Knob Version - Outside Access Device AB60-05 - Lever Version - Outside Mechanical Lever AB60-05 - Digital Lock Industrial AB35-01 AB35-02 Fully certified to EN 1125 & EN 179 Site reversible Option for single or double doors Panic bolts suit doors up to 2500mm high and 1300mm wide Pullman latches available Code AB35-110 Strike Plates to suit Metal Doors Code AB35-120 Outside access devices suit doors 40-70mm thick AB35-04 AB35-05 SE Silver sprayed as standard (SE) Bright stainless steel BSS INDUSTRIAL CE MARKED BS EN 1125 FD60/120 46
PRODUCT CODE - Mechanical - Electronic Operates using a single pin code Suitable for doors 35-57mm thick Optional hold open facility provided by snib internally (AB30-100 only) Suitable for light duty and internal use only (AB30-100) Suitable for medium duty applications (AB30-200) Key override as standard on AB30-200 2 year guarantee AB30-100 AB30-200 47
BOLOTA 304 PRODUCT CODES - 73mm Coat Hook - 101mm Double Coat Hook - 48mm Coat Hook - 150mm Hat & Coat Hook - 175mm Hat & Coat Hook - 177mm Double Hat & Coat AB??-01 - Hook - Coat/Robe Hook AB73-01 Industrial AB73-07 Bright stainless steel 34 AB73-03 48
AB73-04 AB73-06 AB73-02 AB73-05 49
BOLOTA 304 AB75-01 AB75-02 PRODUCT CODES - Robe Hook - Toilet Roll Holder - Tumbler Holder - Soap Dish - Towel Rail (450mm) - Towel Rail (650mm) - Glass Shelf (650mm) - Toilet Brush and Holder - Towel Ring (270 x 280mm) - Grab Rail (450mm) AB75-03 AB75-09 Industrial AB75-04 AB75-08 AB75-05 AB75-07 AB75-10 50
care of finishes 51
Units 9 & 10 I Crane Business Estate Cambridge Road I Milton I Cambridge I CB24 6AZ Telephone 01223 423 773 I Fax 01223 426 266 Email sales@acornironmongery.com www.acornironmongery.com Whilst Acorn Architectural Ironmongery Limited has taken every care to ensure the accuracy of information, data or advice contained in this literature, no liability in respect of such information or advice, whether given negligently or not, can be accepted by the company. Acorn Architectural Ironmongery Limited retains the right to amend the technical specification of any range of equipment shown without notice. Produced by Refresh Media Design Limited.