P.V.C. INSULATED SOLID/ STANDED COPPE CONDUCTO CABLE Application : These cables are used for wiring domestic and commercial buildings. They are also used for industrial electrification Features : Manufactured from bright annealed pure bare copper conductors that offer low conductor resistence, they result in lower heating thereby increase in life and savings in power consumption. These wires are insulated with a special grade PVC compound. The skin colouration offers high insulation resistence and long life. These wires confirm to IS 9:1990. Marking: These cables are inkjet printed with brand name 'PELEC' at regular intervals along with the size of the wire. Colour: Standard colours like ed, Yellow,Blue,, Green, Grey are available ex-stock. Any special colours can be supplied on request. E DA CPI TAC NTH FIA TC PWD In view of continuous improvements in our design & process, specifications given herein are subjects to change without notice. All information given here is in good faith. Pelec shall not be liable for any damages arising out of incorrect use or interpretation
P.V.C. INSULATED SOLID/ STANDED COPPE CONDUCTO CABLE PELEC PLAIN COPPE CONDUCTO, PVC INSULATED UNSHEATHED UP TO 10V SINGLE COE CABLES FO HOUSE WIING AS PE IS - 9/1990 WITH ISI MAK Area in Sq. mm Const. in General Dia. Max D.C. esistance Ohm/km at *C Insulation thickness Nominal Cable Dia (Appx.) Current ating in AMP (1) (2) (3) () (5) () (7) 1/1.13 1.13 18. 2.90 1. 1/1.38 1.38 12. 3. 13 1. 3/0 12. 3.15 13 0 1/1.78 1.78 7.1 0.00 0 3/ 2.2 7.1 0.00.00 1/2.27 2.27.1 0. 2.00 7/5 5.1 0. 2.00 7/ 3.12 3.08 0 5.30.00 7/1..05 1.83 0..00 7/1.70 5. 1.15 7.0 55.00 19/ 5. 1.15 7.0 55.00 7/2.. 0.727 9..00 19/1.30. 0.727 9..00 19/3 7.5 0.52 1 90.00 19/1.8 9.30 0.387 10 1.00 37/1.32 9.30 0.387 10 1 70.00 19/2.17 1 0.28 1. 1 70.00 37/ 1 0.28 1. 1 95.00 19/ 12.80 0.193 17.00 1 95.00 37/1.81 12.80 0.193 17.00 1 Natural PVC Standard & Bunched Flexible Copper These cables are substituted by flexible single core cables which are widely used in house wiring nowadays. The solid conductor of these cable makes it difficult to use in wiring indoors. Outer Sheath Inner Sheath Solid Copper
SINGLE COE FLEXIBLE CABLES / HOUSE WIES Application : These cables are used for wiring domestic and commercial buildings. The multi strand flexible conductors make it ideal for concealed wiring. Features : Manufactured from bright annealed 99.97% pure bare copper conductors that offer low conductor resistence, they result in lower heating thereby increase in life and savings in power consumption. These wires are insulated with a special grade PVC compound. The skin colouration offers high insulation resistence and long life. These wires confirm to IS 9:1990. Marking : The cables are ink jet printed with brand name PELEC, the size of the cable along with BIS license number at regular intervals. Colour : Standard colours like ed, Yellow,Blue,, Green, Grey are available ex-stock. Any special colours can be supplied on request. E DA CPI TAC NTH FIA TC PWD In view of continuous improvements in our design & process, specifications given herein are subjects to change without notice. All information given here is in good faith. Pelec shall not be liable for any damages arising out of incorrect use or interpretation
SINGLE COE FLEXIBLE CABLES / HOUSE WIES PELEC PLAIN COPPE CONDUCTO, PVC INSULATED UNSHEATHED UP TO 10V SINGLECOE FLEXIBLE CABLES AS PE IS - 9/1990 WITH ISI MAK Area in Sq.mm. Configuration Dia. esistance Ohm/km at *C Nominal thickness of insulation. Overall Diameter mm. (Appx.) Current ating in AMP 0.* /0. 39.00 0.0 2.0 0.* 2/0. 2.00 0.0 2.0 7 * 1/0.30 1. 18. 2.80 1.* 22/0.30 1. 12. 3.15 1 0* 3/0.30 2.08 7.1 0 3.90 19.00* 5/0.30 2.1.1 0.0 2 * Packing : 90mts. (approx. 0 yards) coils packed in attractive as well as protective boxes. PELEC PLAIN COPPE CONDUCTO, PVC INSULATED UNSHEATHED UP TO 10V SINGLECOE FLEXIBLE CABLES FO PANEL BOAD WIING AS PE IS - 9/1990 WITH ISI MAK Area in Sq. mm Const. in General Dia. Max D.C. esistance Ohm/km at *C Insulation thickness Nominal Cable Dia (Appx.) Current ating in AMP (1) (2) (3) () (5) () (7) 0. /0. 39.00 0.0 2.0 0. 2/0. 2.00 0.0 2.0 7 1/0.30 1.3 19. 0.0 2.80 1. 22/0.30 1. 13.30 0.0 3.30 1 0 3/0.30 2.08 7.98 3.80 19.00 5/0.30 2.1.95 0.0 2.00 85/0.30 3. 3.30 0 5. 33.00 12/0.30.0 1.91 7. 5.00 22/0.30.00 1.21 8. 0.00 /0.30 7.0 0.78..00 95/0.30 8.70 0.55 12.00 95.00 39/0.0.0 0.38 1 70.00 30/0. 12.30 0.27. 170 95.00 85/0. 1.70 0. 1.80 19.00 2 1.00 08/0..70 0. 2.00 21. 2 7/0. 18.30 0.12 2.00 23. 295 SINGLE COE FLEXIBLE CABLES FO UPS CABLING Type Colours Core Single Core Unshethed ed, Yellow, Blue,, Green White & Grey Signle Core Sheathed Twin Twisted ed & Twin Flat Sheathed ed & 2 Core ound Sheathed ed & 3 Core ound Sheathed ed, & Green/ Yellow for earth Core ound Sheathed ed, Yellow, Blue & Green/Yellow for earth 5 Core ound Sheathed ed, Yellow, Blue & Grey Sheath PVC Insulated single core flexibles in grey and white colour are ideal for use in cabling for UPS in establishments that have large computer networks. These unique colours can help identify the cabling for UPS wiring in the circuit and are available in sizes 0.5 sq. mm to.0 mm. These cables conforming to IS 9, carry the prestigious ISI Mark. Technical details as per table 1.
MULTI COE FLEXIBLE CABLES Application : These multi core flexible cables are used for wiring in control panels, machines and various electricals installations in dry and damp interiors especially under typical industrial environment conditions. The multi strand flexible conductors make it ideal for concealed wiring. Features : The insulated cores are laid up to form the core assembly. The sheathing is provided with specially formulated PVC compound to faciliate not only ease in stripping but also to withstand mechanical abrasion while in use. The tough robust outer pvc jacket protects it from oil, grease, various chemicals and abrasions in order to get long life and electrical safety. Marking : The cables are ink jet printed with generic marking PELEC brand name and the size of the cable along with the BIS licence number. The cables also have meter marking at regular intervals for retailers and consumers conviniency. Packing : Multi core cables are generally available in 90 mtrs. oll packing. All other lengths will be made available on specific request. E DA CPI TAC NTH FIA TC PWD In view of continuous improvements in our design & process, specifications given herein are subjects to change without notice. All information given here is in good faith. Pelec shall not be liable for any damages arising out of incorrect use or interpretation
MULTI COE FLEXIBLE CABLES PVC WIES & CABLES PELEC PLAIN COPPE CONDUCTO, PVC INSULATED SHEATHED UP TO 10V MULTICOE FLEXIBLE CABLES AS PE IS - 9/1990 WITH ISI MAK Area in Sq. mm Const. in General Dia. Max D.C. esistance Ohm/km at *C Insulation thickness Nominal Cable Dia (Appx.) Sheath Thickness Nominal 2 Core 3 Core Core Overall Diameter Approximate 2 Core 3 Core Core Current ating in AMP (1) (2) (3) () (5) () (7) (8) (9) () () (12) (13) 0. /0. 39.00 0.0 2.0..0 7. 0. 2/0. 2.00 0.0 0.80 7. 7.90 7 32/0. 1.3 19. 0.0 2.0 7.00 7. 8. 1. 8/0. 1. 13.30 0.0 2.90 7.0 8. 9.00 1 0 80/0. 2.08 7.98 3. 9.00 9.0. 19.00 5/0.30 2.1.95 0.30.0.30 12.0 2.00 85/0.30 3. 3.30 0 5. 1.15 1.15 12.0 13.0 15. 33.00 12/0.30.0 1.91.0.00 17.00 18.80 5.00 22/0.30.00 1.2 8.00 19.00.00 0.00 /0.30 7.0 0.780. 1. 23.. 28..00 95/0.30 8.70 0.55. 1. 1.70 2. 28.00 31. 95.00 708/0.30.0 0.38 13.70 1.70 1.80 3 33.00 37.00 1 Insulation Sheath Multi core flexible cables are widely used in different industries. The extra sheathing for multi cores makes it ideal to use in typical industrial conditions. These cables are mainly used for its flexibility and sustainabillity beacause of its jacket. Insulation Sheath They are also available as double sheathed cables which are mainly used in dewatering pumps, underground supply and other typical applications. The above size cables are also available in more than cores. Mostly used sizes which are available ex stock are 5 cores, 7 cores, 12 cores, 19 cores and 2 cores. Sheath Any special requirement can be fulfilled on request.
SHEATHED & UNSHEATHED ALUMINIUM CABLES Application : These cables are used in wiring outdoors and for a longer distance. Double sheathing makes it more preferable to use in open applications. Features : These cables are used in low cost housing projects. The conductors are drawn from bright Electrolytic grade aluminium. It makes it cheaper to copper conductor and lighter in weight. Double sheathed cables are used for increased safety and are mostly used in open applications. Marking : These cables are inkjet printed with brand name 'PELEC' at regular intervals alongwith the size of the cable Colour : These cables are generally available in black colour. E DA CPI TAC NTH FIA TC PWD In view of continuous improvements in our design & process, specifications given herein are subjects to change without notice. All information given here is in good faith. Pelec shall not be liable for any damages arising out of incorrect use or interpretation
SHEATHED & UNSHEATHED ALUMINIUM CABLES PVC INSULATED & SHEATHED ALUMINIUM CONDUCTO CABLES UP TO 10 V. Size in Sq.mm Size Thickness of Insulation Diameter of Cable Thickness of Sheath Diameter of Cable C at Deg. Ohm / Km. Current ating in AMP 1/1.38 0.7 3.. 18.1 3/0 0.7 3.15.70 18.1 1/1.78 3.0.80 12.1 13 3/.00 5. 12.1 13.0 1/2..00 5.70 7.1.0 7/5..00 7.1.0 1/2.78.80..1 2.0 7/ 5.30.0.1 2.0 1/3..00 7. 3.08.0 7/1.. 8. 3.08.0 7/1.70 7. 9. 1.91.0 7/2. 1.2 9. 1.1. 55.0 7/2 1.2 1 1.1 10 8.0 19/1.8 1. 10 1.2 15.00 0.1 90 TWIN FLAT CABLES UP TO 10 V. WITH ISI MAK Size in Sq.mm Size Thickness of Insulation Diameter of Cable Thickness of Sheath Diameter of Cable C at Deg. Ohm / Km. Current ating in AMP 1/1.78 0.7 3. 8.0 x 5.0 12.1 13.0 1/2. 3.85 9.70 x 5.90 7.1.0 1/2.78.0 1.1 1 x.0.1 2.0 1/3. 5. 1.2 13.0 x 8.0 3.08 Outer Sheath Natural PVC Copper These cables are used in major applications where underground fittings are required. They are used to get supply from the main point to the subpoint. Inner Sheath Outer Sheath Double sheathing makes it ideal to protect the cable under robust conditions and continue hassle free supply.
FLAT CABLE Area Sq. mm No. of Strands/ Dia. mm 3 COE FLAT CABLES AS PE IS 9: WITH ISI MAK Insulation Sheath Overall Dimentions Thickness (Nom) mm Thickness (Nom) mm Width (Approx) W mm Height (Approx) H mm esistance @ C (Max) ohms/km. Current carrying capacity @0C Amps 22/0.3 0. 12.0 5. 12. 1 3/0.3 0.7. 7.1 18.0 5/0.3.5 7..95 2.0 8/0.3 1.15 18.7 7.9 3.30 31.0 10/0.3 23.7 9.9 1.91 2.0 22/0.3 28.0. 1.21 57.0 /0.3 1.2 2.00.5 1.7 0.780 72.0 95/0.3 1. 2.00.5.2 0.55 90.0 703/0.3 1. 2. 5.5 18.3 0.38 5 70.0 30/0.5 1. 2. 5.0 0.272 13 95.0 /0.5 1. 2.0 0.0 23.5 0. 5 ating Factors for low voltage : Multiply the full load current of submersible motors by factors given below for different voltages & select the right cable. Derating Factors : Multiply the full load current of submersible motors by factors given below for various ambient temperatures. Voltage 15 00 0 300 2 0 Ambient Temperature C. 30 0 5 ating Factor 1 5 1.15 1. 1.30 1. ating Factor 9 5 0.77 E DA CPI TAC NTH FIA TC PWD In view of continuous improvements in our design & process, specifications given herein are subjects to change without notice. All information given here is in good faith. Pelec shall not be liable for any damages arising out of incorrect use or interpretation
FLAT CABLE SELECTION GUIDE FO 3 COE FLAT CABLE Cables Selection Chart at 0* C 15 V (with DOL Starter) Submersible Motors Size of cable in SQ mm / at different Length in mtrs. H.P. Full PVC LoadINSULATED & SHEATHED ALUMINIUM CONDUCTO CABLES UP TO 10 V. WITH ISI MAK Current Amps 30 0 0 70 80 90 0 1 130 10 180 5 7.5 7.5 15 1 19 15 2 17.5 2 28.. 30 2.3. 0 58.1 5 2.1 7.5 55 73.8 0 8 5 87.3 70 93. 80 8.0 SELECTION GUIDE FO 3 COE FLAT CABLE Cables Selection Chart at 0* C 15 V (With Star Delta Starter-double Cable) Submersible Motors Size of cable in SQ mm / at different Length in mtrs. H.P. Full Load Current Amps 30 0 0 70 80 90 0 1 130 10 180 5 7.5 7.5 15 1 19 15 2 17.5 2 28.. 30 2.3. 0 58.1 5 2.1 7.5 55 73.8 0 8 5 87.3 70 93. 80 8.0