CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages
CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery. The SVB blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing. 28
Screw-distributor blocks SVB Diagrams SVB 80 Diagram SVB 25 Diagram 2 SVB 75 Diagram 3 SVB 2 Diagram 4 SPECIAL TERMINALS SVB 400 Diagram 5 SVB 60 Diagram 6 SVB 75/3 Diagram 7 SVB 25/4 Diagram 8 29
Screw-distributor blocks SVB system Features High short-circuit resistance rating IP20-class protection Simple handling Space-saving design Foot base can be snapped on TS 35 DIN rail or suitable for direct mounting Modular design (single- or three-phase block) Suitable for copper wires Housing made from polyamide 6.6 UL 94- SVB 80 CONTA-CONNECT SVB 25 SVB 75 Diagram Page 29 Diagram 2 Page 29 Diagram 3 Page 29 7 connections 8 connections connections Connection type Dimensions (L x W x H), directly installed, mm Size (L x W x H) with TS 35 x 7.5 mm Weight, g Type Type Colours available Ratings Rated voltage, V Rated current, A Rated cross-section for input and output, mm 2 Rated cross-section for input and output, AWG Rated impulse voltage, kv Contamination degree Flamm. class UL 94 Short-circuit resistance rating Short-circuit current resistance IPK (peak value), ka Short-circuit current resistance ICW over s, ka SCCR rating kv Class J series fuse required, A Connection data Inputs Number of connections Clampable wire: mm 2 e single wire H07V-U m stranded H07V-R f finely stranded H07V-K f finely stranded H07V-K and ferrule DIN 46 228/ f finely stranded H07V-K and ferrule with plastic collar Diameter mm Torque Nm Terminal screw Blade size Stripping length mm Outputs Number of connections Clampable wire: mm 2 e single wire H07V-U m stranded H07V-R f finely stranded H07V-K f finely stranded H07V-K and ferrule DIN 46 228/ f finely stranded H07V-K and ferrule with plastic collar Diameter mm Torque Nm Terminal screw Blade size Stripping length mm Accessories End stop ES Allen key socket wrench ISKS Allen key socket wrench ISKS Screwdriver SDK Screwdriver SDK Additional accessories 66 x 27 x 47 66 x 27 x 63 SVB 80 LG 740 000 600 600 80 80 80 6 6 6 8 4 4 4 2,7,9 00 80 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 7,5 3 PZ2 0 2 2 4 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 7 4,5.5-3 0.8-,5 M4 PZ2 PZ 0-2 9-2 SDK,0x80 2289 SDK,0x00 2290 75 x 27 x 47 75 x 27 x 34 SVB 25 LG 74 000 600 600 25 5 5 35 6 6 8 2 4 4 4,2 00 25 0-35 2.5-6 0-35 2.5-6 0-35 2.5-6 0-35 2.5-6 0-35 2.5-6 0-35 2.5-6 0 7 3,5-5 3,5-5 M8 M6 M4 M4 4-6 2-5 6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 6.5 2-3 PZ2 0-2 SDK,0x00 2290 7 x 45 x 43 7 x 45 x 46 228 SVB 75 LG 742 000 600 600 75 5 75 70 6 8 2 4 6-6-70 6-70 6-70 6-6- 6-2 6-0 M0 4-6 0 2.5-6 2.5-6 2.5-6 2.5-0 2.5-0 2.5-0 6.5 3-4 M6 M3 0-2 ISKS 5 288 More accessories starting on page 264. 220
SVB 2 SVB 400 SVB 60 SVB 75/3 SVB 25/4 Diagram 4 Page 29 Diagram 5 Page 29 Diagram 6 Page 29 Diagram 7 Page 29 Diagram 8 Page 29 2 connections 2 connections 7 connections with busbar distribution 3 x 7 connections 3 x 8 connections with neutral busbar 96 x 44 x 96 x 44 x 53 434 SVB 2 LG 743 IEC UL 000 600 2 2 20 35 6 0 2 4 () 96 x 44 x 96 x 44 x 53 44 SVB 400 LG 744 IEC UL 000 600 400 85 35 6 0 3/0 3 92 x 35 x 92 x 35 x 54 238 SVB 60 LG 746 000 600 600 60 60 60 70 26 8 2/0 4 4 7 x 80 x 43 7 x 80 x 46 386 SVB 75/3 LG 745 000 600 600 75 5 75 70 6 8 2 4 6 74 x 98 x 74 x 98 x 53 34 SVB 25/4 LG 747 IEC 690 25 35 6 - SPECIAL TERMINALS 5 24.5 00 2 5 2 00 3 00 75 00 75,8-35-20 35-20 35-20 35-95 35-95 35-95 5 9-2 M4 M6 27-29 2 5 4 6-35.5-6.5-0 6-35.5-6.5-0 6-35.5-6.5-0 6-25.5-6.5-0 6-25.5-6.5-0 6-25.5-6.5-0 9 6.5 6 3,5-7 2-3 2-3 M8 M6 M6.2 x 6.5 0.8 x 4 0.8 x 4 0-2 0-2 0-2 ISKS 6 2772 SDB 0.8x4 087 SDB.2x6.5 088 95-85 95-85 95-85 95-95- 95-9 25-27 M6 M8 27-29 2 5 4 6-35.5-6.5-0 6-35.5-6.5-0 6-35.5-6.5-0 6-25.5-6.5-0 6-25.5-6.5-0 6-25.5-6.5-0 9 6.5 6 3,5-7 2-3 2-3 M8 M6 M6.2 x 6.5 0.8 x 4 0.8 x 4 0-2 0-2 0-2 ISKS 8 2773 SDB 0.8x4 087 SDB.2x6.5 088 0-70 0-70 0-70 0-70 0-70 0-70 3 5-6 M0 6-8 A Busbar 6 6 x 5 mm max. 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 2.5-6 7.5-3 2-3 M6 PZ2 0-2 - ISKS 5 288 ISKS 6 2772 3 x 6-70 6-70 6-70 6-6- 6-2 6-0 M0 4-6 3 x 6 2.5-6 2.5-6 2.5-6 2.5-0 2.5-0 2.5-0 6.5 3-4 M6 M3 0-2 ISKS 5 288 ISKS 6 2772 3 x 3 x 5 3 x 2 6-35.5-6 4-6 6-35.5-6 4-6 6-35.5-6 4-6 6-25.5-6 4-0 6-25.5-6 4-0 6-25.5-6 4-0 9 5 7,5 0.8,5 M4 PZ2 PZ PZ2 2-8 9-2 2-8 Neutral wire Neutral wire Neutral wire 4 6 6-35.5-6 4-6 6-35.5-6 4-6 6-35.5-6 4-6 6-25.5-6 4-0 6-25.5-6 4-0 6-25.5-6 4-0 9 5 7,5 0.8,5 M4 PZ2 PZ PZ2 2-8 9-2 2-8 SDK,0x80 2289 SDK,0x00 2290 22
www.kontor-media.de GB 08 All rights reserved. Otto-Hahn-Str. 7 D-336Hövelhof Phone +49 (0) 52 57. 98 33-0 Fax +49 (0) 52 57. 98 33-33 info@conta-clip.com www.conta-clip.com