MF: Filtration Modules UDT ME: Modules with electrically heated coils MA: Modules with water coils UDTX UDT UDTX FILTRATION UNITS AND AIR TREATMENT MODULES According EU Regulation
UDT UDT Soundproofed air treatment units with direct drive motors, fitted with double-inlet fans and optional modules for filtration, electrical or hot-water heating Box: Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Stuffing-box for cable inlet. Fan: Ventilation units, equipped with CBD series fans. Impellers with forward-facing blades made from galvanised sheet steel. Motor: Single-phase two-speed motors with IE 2 efficiency, except for capacities less than 0.5 kw. Class F motors, with ball bearings, IP54 protection. Single-phase 220 240V 50Hz and Three-phase 220-240/380 4V 50Hz. Max. air temperature to transport: 20ºC.+ 60ºC. Versions: MF: Filtration Module. Standard version F6+F8 and optionally F+F. ME: Module with electrically heated coil. Standard version G4 and optionally with F6+F8 or F+F filters. MA: Module with water coil. Standard version G4 and optionally with F6+F8 or F+F filters. On request: Vertical outlet. Module installed as blower. Order code UDT / 4M 1/5 MF F6+F8 Fan units with air treatment Turbine size in inches Number of motor poles 4=1400 r/min. 50 Hz 6=00 r/min. 50 Hz T=Three-phase M=Single-phase Motor power (HP) Filter options for MF modules Standard version F6+F8 Option: G4+F, F+F Air treatment modules MF: filtration module (standard version) ME: module with electrically heated coil (G4 filter included) MA: module with water coil (G4 filter included) Technical characteristics Model Speed Maximum admissible current (A) Installed power Maximum airflow Sound Level Approx. weight (r/min) 230 V 400 V (kw) (m3/h) db(a) (Kg) UDT-/-4M 1/5 30 1.4 0. 20 58 22.5 UDT-/-4M 1/2 1320 3.3 0.3 2800 66 31.8 UDT-/-4M 3/4 13 4.5 0.55 3600 0 32.6 UDT-/-4M 1/2 1320 3.3 0.3 2800 65 3.3 UDT-/-4M 3/4 13 4.5 0.55 350 0 38.1 UDT-/-6T 1 1/2 850 6.6 3.8 1.1 800 4 53.8 UDT-/-6M 3/4 850 5 0.55 400 63 52.3 UDT-/-6M 1 850 6 0.5 6000 0 53.3 UDT-/-6T 3 80. 6.3 2.2 1100 4 80
UDT Dimensions in mm Model A B C D1 D2 E L K UDT-/ 81 40 40 428 428 1 226 24 UDT-/ 41 550 550 488 488 86 2 31 UDT-/ 6 605 605 543 543 88 306 343 UDT-/ 111 680 680 618 618 84 360 404 UDT-/ 1346 855 855 3 3 11 423 40 Acoustic features Sound power Lw(A) spectrum in db(a) via frequency band in Hz Model 63 5 250 500 00 2000 4000 8000 /-4M 1/5 43 54 58 62 64 63 62 53 /-4M 1/2 51 62 66 0 2 1 0 61 /-4M 3/4 55 66 0 4 6 5 4 65 /-4M 1/2 50 61 65 6 1 0 6 60 /-4M 3/4 55 66 0 4 6 5 4 65 /-6T 1 1/2 5 0 4 8 80 8 6 /-6M 3/4 48 5 63 6 6 68 6 58 /-6M 1 55 66 0 4 6 5 4 65 /-6T 3 61 2 81 83 81 80 1 Air treatment module options MF: Filtration Modules Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module F6+F8 and optionally F+F. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. ME: Modules with electrically heated coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Stuffing-box for cable inlet. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. MA: Modules with water coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS.
UDT MF: Filtration module characteristics Head loss - filters = MF / = MF / = MF / = MF / = MF / ME: Technical characteristics of electrically heated coil Model Current (A) Installed power (kw) Maximum airflow Approx. weight 400V Stage 1 Stage 2 Stage 3 (m3/h) (Kg) ME-/ 13 3 3 3 00 23 ME-/ 23 5.4 5.4 5.4 3300 33 ME-/ 33... 4500 44 ME-/ 52 6000 61 ME-/ 81 18.8 18.8 18.8 000 6
UDT Head loss - electrical coil heaters ME ME MA: Characteristics of 0/0ºC water coil for air at 0ºC Model Installed Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 23 00 1.0 16.3 1/2 18 MA-/ 3 2500 1. 26.6 1/2 25 MA-/ 46 3000 2.0 1.6 3/4 31 MA-/ 66 4500 2. 2.8 3/4 3 MA-/ 8 5500 4.8 21.4 1 63 MA: Characteristics of 80/60ºC water coil for air at 0ºC Model Installed Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 20 00 0. 13.0 1/2 18 MA-/ 33 2500 1.4 21.3 1/2 25 MA-/ 40 3000 1. 14.0 3/4 31 MA-/ 58 4500 2.5 23.8 3/4 3 MA-/ 0 5500 4.2 1.5 1 63 Head loss - water coil heaters MA MA
UDT Installation and filter position diagrams Filtration Module Heating Coil Modules Module installed as extractor Module installed as blower Module Dimensions mm Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS MF MODULES Model A B C D1 D2 MF-/ 40 40 40 428 428 MF-/ 550 550 550 488 488 MF-/ 605 605 605 543 543 MF-/ 680 680 680 618 618 MF-/ 855 855 855 3 3 ME MODULES Model A B C D1 D2 E ME-/ 40 40 40 428 428 245 ME-/ 550 550 550 488 488 25 ME-/ 605 605 605 543 543 302,5 ME-/ 680 680 680 618 618 340 ME-/ 855 855 855 3 3 42,5 MA MODULES Model A B C D1 D2 E1 E2 G H MA-/ 40 40 40 428 428 26 224 334 60 MA-/ 550 550 550 488 488 2 254 4 5 MA-/ 605 605 605 543 543 324 281 452 54 MA-/ 680 680 680 618 618 362 31 52 MA-/ 855 855 855 3 3 460 35 61 42
Characteristic curves - fans UDT
UDTX UDTX Soundproofed belt-driven air treatment units, fitted with double-inlet fans and optional modules for filtration, electrical or hot-water heating Box: Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Stuffing-box for cable inlet. Fan: Ventilation units, equipped with fans from the CBX, CBXC or CBXR series Impellers with forward-facing blades made from galvanised sheet steel. Motor: Single-phase two-speed motors with IE-2 efficiency, except for capacities less than 0.5 kw. Class F motors, with ball bearings, IP54 protection. Three-phase 230/400V -50Hz. (up to 5.5 HP) and 400/60V -50Hz (capacity over 5.5 HP). Max. air temperature to transport: -20ºC+ 60ºC Versions: MF: Filtration Module. Standard version F6+F8 and optionally F+F. ME: Module with electrically heated coil. Standard version G4 and optionally with F6+F8 or F+F filters. MA: Module with water coil. Standard version G4 and optionally with F6+F8 or F+F filters. On request: Vertical outlet. Belt drive on left. Module installed as blower. Order code UDTX / 2 MF F6+F8 Fan units with air treatment Turbine size in inches Motor power (HP) Filter options for MF modules Standard version F6+F8 Option: G4+F, F+F Air treatment modules MF: filtration module (standard version) ME: module with electrically heated coil (G4 filter included) MA: module with water coil (G4 filter included) Technical characteristics Model Speed Maximum admissible current (A) Installed power Maximum airflow Sound Level Approx. weight (r/min) 230 V 400 V 60V (kw) (m3/h) db(a) (Kg) UDTX-/-0.25 0 1.23 0.1 0.18 50 48 3 A UDTX-/-0.33 20 1.66 0.6 0.25 10 50 3.8 A UDTX-/-0.5 1420 2.02 1.1 0.3 50 53 3 A UDTX-/-0.5 1600 2.2 1.6 0.55 1450 56 41 A UDTX-/-1 10 3.1 1. 0.5 00 58 42.5 A UDTX-/-0.25 825 1.23 0.1 0.18 0 45 48 A UDTX-/-0.33 20 1.66 0.6 0.25 1800 48 50 A UDTX-/-0.5 20 2.02 1.1 0.3 2200 51 51.5 A UDTX-/-0.5 50 2.2 1.6 0.55 200 55 54.5 A UDTX-/-1 0 3.1 1. 0.5 3200 56 56 A UDTX-/-1.5 60 4.03 2.32 1.1 350 60 5 A UDTX-/-0.5 845 2.02 1.1 0.3 250 52 55 A Assembly version
UDTX Technical characteristics Model Speed Maximum admissible current (A) Installed power Maximum airflow Sound Level Approx. weight (r/min) 230 V 400 V 60V (kw) (m3/h) db(a) (Kg) UDTX-/-0.5 845 2.2 1.6 0.55 3800 56 5 A UDTX-/-1 60 3.1 1. 0.5 415 58 58.5 A UDTX-/-1.5 0 4.03 2.32 1.1 4800 61 61.3 A UDTX-/-2 1140 5.6 3.44 1.5 5400 63 64.6 A UDTX-/-0.5 55 2.02 1.1 0.3 4200 52 6 A UDTX-/-0.5 65 2.2 1.6 0.55 4800 54 1 A UDTX-/-1 65 3.1 1. 0.5 5400 5 2.4 A UDTX-/-1.5 855 4.03 2.32 1.1 5800 5 5.3 A UDTX-/-2 65 5.6 3.44 1.5 6500 62 8.6 A UDTX-/-3 1180 8.36 4.83 2.2 400 65 8 A UDTX-/-0.5 525 2.2 1.6 0.55 500 4 85 B UDTX-/-1 55 3.1 1. 0.5 6500 52 86.4 B UDTX-/-1.5 635 4.03 2.32 1.1 500 54 8.3 B UDTX-/-2 60 5.6 3.44 1.5 8200 56 2.6 B UDTX-/-3 40 8.36 4.83 2.2 500 5 1 B UDTX-/-4 805.6 6.33 3 600 61 3 B UDTX-/-5.5 65 14.1 8. 4 000 63 8 B UDTX-18/18-1.5 480 4.03 2.32 1.1 000 48 2 B UDTX-18/18-2 605 5.6 3.44 1.5 250 51 5.3 B UDTX-18/18-3 50 8.36 4.83 2.2 0 54 133. B UDTX-18/18-4 640.6 6.33 3 13200 56 135. B UDTX-18/18-5.5 65 14.1 8. 4 000 58 141 B UDTX-18/18-.5 60 11.6 6.2 5.5 00 60 4.5 B Assembly version Dimensions in mm Model A B C D1 D2 E L K UDTX-/ 1321 40 40 428 428 1 226 24 UDTX-/ 1411 550 550 488 488 86 2 31 UDTX-/ 1461 605 605 543 543 88 306 343 UDTX-/ 41 680 680 618 618 84 360 404 UDTX-/ 111 855 855 3 3 11 423 40 UDTX-18/18 184 00 00 38 38 13 48 554
UDTX Air treatment module options MF: Filtration Modules Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module F6+F8 and optionally F+F. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. ME: Modules with electrically heated coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Stuffing-box for cable inlet. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. MA: Modules with water coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. MF: Filtration module characteristics Head loss - filters 18 18 18 18 18 = MF / = MF / = MF / = MF / = MF / 18= MF 18/18
UDTX ME: Technical characteristics of electrically heated coil Model Current (A) Installed power (kw) Maximum airflow Approx. weight 400V Stage 1 Stage 2 Stage 3 (m3/h) (Kg) ME-/ 13 3 3 3 00 23 ME-/ 23 5.4 5.4 5.4 3300 33 ME-/ 33... 4500 44 ME-/ 52 6000 61 ME-/ 81 18.8 18.8 18.8 000 6 ME-18/18 22.5 22.5 22.5 13000 3 Head loss - electrical coil heaters ME ME 18 MA: Characteristics of 0/0ºC water coil for air at 0ºC Model Power Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 23 00 1.0 16.3 1/2 18 MA-/ 3 2500 1. 26.6 1/2 25 MA-/ 46 3000 2.0 1.6 3/4 31 MA-/ 66 4500 2. 2.8 3/4 3 MA-/ 8 5500 4.8 21.4 1 63 MA-18/18 3 000 6.8 21. 1 1/4 8 MA: Characteristics of 80/60ºC water coil for air at 0ºC Model Power Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 20 00 0. 13.0 1/2 18 MA-/ 33 2500 1.4 21.3 1/2 25 MA-/ 40 3000 1. 14.0 3/4 31 MA-/ 58 4500 2.5 23.8 3/4 3 MA-/ 0 5500 4.2 1.5 1 63 MA-18/18 133 000 5.8 1.5 1 1/4 8 Head loss - water coil heaters MA MA 18
UDTX Installation and filter position diagrams Filtration Module Heating Coil Modules Module installed as extractor Module installed as blower Module Dimensions mm Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS MF MODULES Model A B C D1 D2 MF-/ 40 40 40 428 428 MF-/ 550 550 550 488 488 MF-/ 605 605 605 543 543 MF-/ 680 680 680 618 618 MF-/ 855 855 855 3 3 MF-18/18 00 00 00 38 38 ME MODULES Model A B C D1 D2 E ME-/ 40 40 40 428 428 245 ME-/ 550 550 550 488 488 25 ME-/ 605 605 605 543 543 302.5 ME-/ 680 680 680 618 618 340 ME-/ 855 855 855 3 3 42.5 ME-18/18 00 00 00 38 38 500 MA MODULES Model A B C D1 D2 E1 E2 G H MA-/ 40 40 40 428 428 26 224 334 60 MA-/ 550 550 550 488 488 2 254 4 5 MA-/ 605 605 605 543 543 324 281 452 54 MA-/ 680 680 680 618 618 362 31 52 MA-/ 855 855 855 3 3 460 35 61 42 MA-18/18 00 00 00 38 38 522 4 814 4
UDTX Characteristic curves - fans / /
UDTX Characteristic curves - fans / /
UDTX Characteristic curves - fans / 18/18
MODULAR KIT MODULAR KIT AIR TREATMENT UNITS CJBD/AL: Soundproofed ventilation units with profiles in aluminium and pre-lacquered sheet CJBD/ALS: Ventilation units with double wall of insulation, pre-lacquered sheet and profiles in aluminium Filtration Modules Modules with water coils Modules with electrical coils Fan: CBD series double-inlet fans. Aluminium profile structure with thermal insulation and soundproofing. Impeller with forward-facing blades made from galvanised sheet steel. Stuffing-box for cable inlet. Motor: Class F closed motors with incorporated thermal protector, ball bearings and IP-54 protection. Single-phase 220-240V.-50Hz. and three-phase 220-240/380-4V.-50Hz. Max. air temperature to transport: -20ºC+ 60ºC Finish: Anticorrosive pre-lacquered sheet steel and aluminium. On request: With circular inlet. Order code CJBD/AL 2525 6M 1/3 CJBD/AL: With aluminium profiles and soundproofed pre-lacquered sheet. CJBD/ALS: With double wall of insulation, pre-lacquered sheet and aluminium profiles Impeller size in mm mm inches 11 / 2525 / 2828 / 3333 / 33 / Number of motor poles 4=1400 r/min 50 Hz 6=00 r/min 50 Hz T=Three-phase M=Single-phase Installed motor (HP) Technical characteristics Model Speed Maximum admissible current (A) Installed power Maximum airflow Sound level Weight approx. (r/min) 230V 400 V (kw) (m3/h) db(a) (Kg) CJBD/AL CJBD/ALS 11-4M 1/5 30 1.40 0. 20 58 22.5 CJBD/AL CJBD/ALS 11-6M 1/ 820 0.85 0.08 30 53 22.5 CJBD/AL CJBD/ALS 2525-4M 1/2 1320 3.30 0.3 2800 66 31.8 CJBD/AL CJBD/ALS 2525-4M 3/4 13 4.50 0.55 3600 0 32.6 CJBD/AL CJBD/ALS 2525-6M 1/5 850 1.50 0. 2200 5 30.1 CJBD/AL CJBD/ALS 2525-6M 1/3 830 2.20 0.25 200 61 31.3 CJBD/AL CJBD/ALS 2828-4M 1/2 1320 3.30 0.3 2800 65 3.3 CJBD/AL CJBD/ALS 2828-4M 3/4 13 4.50 0.55 350 0 38.1 CJBD/AL CJBD/ALS 2828-6M 1/3 830 2.20 0.25 3200 61 36.8 CJBD/AL CJBD/ALS 3333-6T 1 1/2 850 6.60 3.80 1. 800 4 53.8 CJBD/AL CJBD/ALS 3333-6M 3/4 850 5.00 0.55 400 63 52.3 CJBD/AL CJBD/ALS 3333-6M 1 850 6.00 0.5 6000 0 53.3 CJBD/AL CJBD/ALS 33-6T 3 80.0 6.30 2.20 1100 4 80.0
MODULAR KIT Acoustic features Sound power Lw(A) spectrum in db(a) via frequency band in Hz Model 63 5 250 500 00 2000 4000 8000 Model 63 5 250 500 00 2000 4000 8000 11-4M 1/5 43 54 58 62 64 63 62 53 2828-4M 3/4 55 66 0 4 6 5 4 65 11-6M 1/ 38 4 53 5 5 58 5 48 2828-6M 1/3 46 5 61 65 6 66 65 56 2525-4M 1/2 51 62 66 0 2 1 0 61 3333-6T 1 1/2 5 0 4 8 80 8 6 2525-4M 3/4 55 66 0 4 6 5 4 65 3333-6M 3/4 48 5 63 6 6 68 6 58 2525-6M 1/5 44 55 5 63 65 64 63 54 3333-6M 1 55 66 0 4 6 5 4 65 2525-6M 1/3 46 5 61 65 6 66 65 56 33-6T 3 61 2 81 83 81 80 1 2828-4M 1/2 50 61 65 6 1 0 6 60 Erp. BEP (best efficiency point) characteristics MC EC VSD SR Measurement category Efficiency category S Static T Total Variable-speed drive Specific ratio ηe[%] Efficiency N Efficiency grade [kw] Input power [m 3 /h] Airflow [mmh 2 O] Static or total pressure (According to EC) [RPM] Speed Model MC EC VSD SR ηe[%] N (kw) (m 3 /h) (mm H 2 O) 11-4M 1/5 A S NO 1.00 2.% 38.6 0.14 26 21.3 1331 11-6M 1/ - - - - - - 0.2 8 11.8 88 2525-4M 1/2 A S NO 1.00 35.4% 43.5 0.52 2000 34.4 1316 2525-4M 3/4 A S NO 1.00 3.0% 44.6 0.63 2265 38.2 1350 2828-4M 1/2 A S NO 1.00 38.4% 46.1 0.5 22 3.0 2 2828-4M 3/4 A S NO 1.00 3.4% 46.2 0.81 3138 40.2 5 2828-6M 1/3 A S NO 1.00 30.8% 3. 0.38 2251 1.4 856 2828-6M 3/4 A S NO 1.00 30.1% 38. 0.443 254 1.2 30 3333-6T 1 1/2 A S NO 1.00 38.0% 44.1 1.116 5035 31.0 8 3333-6M 3/4 A S NO 1.00 33.8% 40.6 0.85 38 28.1 865 3333-6M 1 A S NO 1.00 32.0% 38.3 1.040 43 2. 81 33-6T 3 A S NO 1.01 44.3% 48.5 2.188 21 46.1 24 (RPM) Dimensions in mm CJBD/AL CJBD/ALS Model Equiv. Inches A B C D1 D2 E L K CJBD/AL CJBD/ALS 11 / 460 460 460 420 420 6 225 246 CJBD/AL CJBD/ALS 2525 / 520 520 520 480 480 8 28 3 CJBD/AL CJBD/ALS 2828 / 55 55 55 535 535 1 306 340 CJBD/AL CJBD/ALS 3333 / 650 650 650 6 6 6 361 402 CJBD/AL CJBD/ALS 33 / 55 55 55 65 65 3 421 48
MODULAR KIT Air treatment module options MF: Filtration Modules Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module F6+F8 and optionally F+F. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. ME: Modules with electrically heated coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Stuffing-box for cable inlet. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. MA: Modules with water coils Aluminium profile structure with thermal insulation and soundproofing. Side access panel for correct maintenance. Modular construction, for adding filter or air treatment modules. Standard version module G4 and optionally with F6+F8 or F+F filters. Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS. Order code MF / F6+F8 Filtration Modules Compatible box size Filter combination: G4+F F6+F8 F+F ME / F6+F8 Modules with electrically heated coils Compatible box size Filter combination: G4+F F6+F8 F+F MA / F6+F8 Modules with water coils Compatible box size Filter combination: G4 F6 F G4+F
MODULAR KIT MF: Filtration module characteristics Head loss - filters 18 18 18 18 18 = MF / = MF / = MF / = MF / = MF / 18= MF 18/18 ME: Technical characteristics of electrically heated coil Model Current (A) Installed power (kw) Maximum airflow Approx. weight 400V Stage 1 Stage 2 Stage 3 (m3/h) (Kg) ME-/ 13 3 3 3 00 23 ME-/ 23 5.4 5.4 5.4 3300 33 ME-/ 33... 4500 44 ME-/ 52 6000 61 ME-/ 81 18.8 18.8 18.8 000 6 ME-18/18 22.5 22.5 22.5 13000 3
MODULAR KIT Head loss - electrical coil heaters ME ME 18 MA: Characteristics of 0/0ºC water coil for air at 0ºC Model Installed Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 23 00 1.0 16.3 1/2 18 MA-/ 3 2500 1. 26.6 1/2 25 MA-/ 46 3000 2.0 1.6 3/4 31 MA-/ 66 4500 2. 2.8 3/4 3 MA-/ 8 5500 4.8 21.4 1 63 MA-18/18 3 000 6.8 21. 1 1/4 8 MA: Characteristics of 80/60ºC water coil for air at 0ºC Model Installed Maximum airflow Water flow Water head loss Connection Approx. weight (kw) (m3/h) (m3/h) (kpa) (in) (Kg) MA-/ 20 00 0. 13.0 1/2 18 MA-/ 33 2500 1.4 21.3 1/2 25 MA-/ 40 3000 1. 14.0 3/4 31 MA-/ 58 4500 2.5 23.8 3/4 3 MA-/ 0 5500 4.2 1.5 1 63 MA-18/18 133 000 5.8 1.5 1 1/4 8 Head loss - water coil heaters MA MA 18
MODULAR KIT Installation and filter position diagrams Filtration Module Heating Coil Modules Module installed as extractor Module installed as blower Module Dimensions mm Compatible with series UDT, UDTX, CJBD/AL, CJBD/ALS, CJBX/AL and CJBX/ALS MF MODULES Model A B C D1 D2 MF-/ 40 40 40 428 428 MF-/ 550 550 550 488 488 MF-/ 605 605 605 543 543 MF-/ 680 680 680 618 618 MF-/ 855 855 855 3 3 MF-18/18 00 00 00 38 38 ME MODULES Model A B C D1 D2 E ME-/ 40 40 40 428 428 245 ME-/ 550 550 550 488 488 25 ME-/ 605 605 605 543 543 302.5 ME-/ 680 680 680 618 618 340 ME-/ 855 855 855 3 3 42.5 ME-18/18 00 00 00 38 38 500 MA MODULES Model A B C D1 D2 E1 E2 G H MA-/ 40 40 40 428 428 26 224 334 60 MA-/ 550 550 550 488 488 2 254 4 5 MA-/ 605 605 605 543 543 324 281 452 54 MA-/ 680 680 680 618 618 362 31 52 MA-/ 855 855 855 3 3 460 35 61 42 MA-18/18 00 00 00 38 38 522 4 814 4
MODULAR KIT Characteristic curves - fans Q= Airflow in m 3 /h, m 3 /s and cfm Pe= Static pressure in mm.w.c., Pa and inwg 11 2525 2828 3333/33 Accessories INT RM AR VSD1/A-RFM VSD3/A-RFT AET TEJ VIS
EFFICIENT WORK FANS Fast and flexible industrial fan solutions and tailored fans Large experience in smoke control systems and ATEX applications Wide range of certified products for specific markets AXIAL FANS AND ROOF FANS CENTRIFUGAL AND IN-LINE FANS FANS FOR SMOKE EXTRACTION HEAVY DUTY FANS AND EXTRACTORS FOR ATEX EXPLOSIVE ATMOSPHERES HEAT RECOVERERS, FILTRATION UNITS AND AIR TREATMENT UNITS AIR CURTAINS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS VENTILATION SYSTEMS FOR HOUSES REQUEST INFORMATION www.sodeca.com Distributed by: SODECA. HEADQUARTERS Ctra. de Berga, km 0, E-08580 SANT QUIRZE DE BESORA Barcelona - SPAIN Tel. +34 3 852 1 11 Fax: +34 3 852 0 42 ventilation@sodeca.com PORTUGAL Sodeca Portugal Lda Luiz Araújo Rua Veloso Salgado /1138 4450-801 Leça de Palmeira, Porto, PORTUGAL Tel. +351 22 1 0 Fax. +351 22 1 11 geral@sodeca.pt PORTUGAL Sodeca Portugal Lda Luiz Araújo P. E. da Granja - Pavilhão 8 2625-60 Vialonga, Lisboa, PORTUGAL Tel. +351 21 48 41 Fax. +351 21 48 43 contabilidade@sodeca.pt FINLAND Sodeca Finland Oy Sr. Kai Yli-Sipilä Metsälinnankatu 30, PL2, FI-3200 Huittinen, FINLAND Tel. + 358 400 320 5 orders.finland@sodeca.com CHILE Sodeca Ventiladores Ltda Sr. Francesc Bertran Avda. Puerta Sur 03380 San Bernardo, Santiago, CHILE Tel. +56 22 840 5582 ventas.chile@sodeca.com ÁREA CARIBE Residencial Miramar Apto. Nº 8 Ave. ma Nº 1805 entre 18 y 20 Miramar Playa, Havana, CUBA Tel. 0053 20 4321 sodeca@sodeca.co.cu OOO SODECA Sodeca Russia Stanislav Alifanov Russia, 140180, Moscow region, Zhukovskiy, Myasischeva str, 1, room 603 Business Сenter Chaika Tel:+ 45 55 0 50 alifanov@sodeca.com