Mini Air Hoists Efficient, High Speed Material Handling NPK air hoists are engineered to provide high lifting speeds and accurate control. Lightweight, compact design for use in a stationary position, but can also be quickly moved to another location. Air hoists are extremely useful in hazardous environments where electrical hoists are prohibited. Features external brake adjustment, exhaust muffler, builtin lubricator and swivel mounted air inlet. Extra Rugged construction Durable construction for constant, heavyduty use. Designed for fast moving production assembly operations and heavy manufacturing industries. OverloadProof Air Motor for a Wide Safety Margin The rotary vane air motor is completely enclosed. Motor is unaffected by fumes, dirt or heat. Motor and controls can withstand constant stopping and sudden starting. Can be overloaded or stalled without damage to the hoist. Motor is inherently selfcooling and cannot be burned out. Safety Hooks and Automatic Limit Stops Top and bottom hooks have safety snaps and hoist has automatic limit stops to prevent overtravel. Variable Speed control Operator can choose any speed from the slowest creep to full throttle. The heaviest loads can be positioned quickly and accurately, or raised rapidly. Features an external screw adjustment for lift and descent speeds. Pendant Type control Leaves the operator one hand free to guide the load with precise control. Preferred compact design and easy handling. RHL00 1 Ton PcU00 w/ guard (included with all Pendant Control Hoists) PcU00 (shown without guard for detail) RHL00 1/2 Ton caution This equipment is not to be used for lifting, supporting or transporting people, or for lifting or supporting loads over people. 138 No. RHL20 RHL20P RHL00 RHL00P RHL00 RHL00P Chain Type Control Link Link Link 0 lbs. 10 lbs. 20 lbs. Pullcord Pendant Pullcord Pendant Pullcord Pendant Standard Lift No. of Falls Std. Load Chain Headroom Lift Speed at 8 ft. 1 9 ft. 17" 88.6 ft./min. 8 ft. 1 9 ft. 17" 41.3 ft./min. 8 ft. 2 18 ft. " 18.7 ft./min. 3.2 39.6 3.2 39.6 48.4 1.7 Rec d Hose Size Air Inlet Thread CFM 1/2" 1/2" 4.9 1/2" 1/2" 4.9 1/2" 1/2" 4.9 RHL2800 Link 6160 lbs. Pullcord ft. 2 2 ft. 28" 7.2 ft./min. 132.0 3/4" 1/2" 60.0 Extra lift can be installed for an additional charge. Link chain hoists equipped with chain basket. Most parts for the above hoists are interchangeable with ARO, Chicago Pneumatic and Yale hoists.
JET SMH Series Hand Chain Hoists Full range capacity 1/2 to tons Standard features found only in higher priced models Economical hand chain hoist designed for years of troublefree service All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Needle bearing supported load sheave for smooth operation Completely enclosed Weston type automatic brake system for precise load spotting Triplespur gears provide high efficiency ratio with minimum effort Induction hardened grade 80 load chain Drop forged hooks with heavyduty safety latches swivel 360 for easy rigging Smooth rolled edge on hand chain cover prevents side pull jamming Standard hand chain drop equals lift length Complies with OSHA, ANSI/ASME B30.16 and HST2 standards CAUTION Be sure that the supporting structures and loadattaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people. IMPORTANT Before installation, read owner s manual for additional warnings and precautions. Not for use in an explosive environment. 1704 Standard Lift (Ft.) Headroom Number of Falls Load Chain (Dia./MM) Req. Hand Chain (Ft.) to Lift Load 1' Pounds Pull to Lift Ship 1700 1702 SMH1/2T SMH1/2T 10 13 1.0 32 49 29 1704 1706 SMH1T SMH1T 20 1 1 6.3 37 80 27 38 1708 17 SMH11/2T SMH11/2T 3 171/2 1 7.0 8 82 41 6 1712 1714 SMH2T SMH2T 4400 181/2 1 8.0 70 91 46 60 1716 1718 SMH3T SMH3T 68 231/2 2 7.0 116 86 60 80 17 1722 SMHT SMHT 100 28 2 9.0 172 97 91 122 1724 1726 SMHT SMHT 200 3 4 9.0 344 4 177 232 139
JET L90 Series Hand Chain Hoists Full range capacity 1/2 to tons Compact and portable for ease of positioning material Engineered for commercial and industrial lifting applications All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Completely enclosed Weston type automatic brake system for positive load spotting Triplespur gears provide high efficiency ratio with minimum effort Heat treated and hardened grade 80 load chain Smooth rolled edge on hand chain cover prevents side pull jamming Wide throat drop forged safety hooks for easier rigging Standard hand chain drop equals lift length Complies with OSHA, ANSI/ASME B30.16 and HST2 standards CAUTION Be sure that the supporting structures and loadattaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people. IMPORTANT Before installation, read owner s manual for additional warnings and precautions. Not for use in an explosive environment. 10 Standard Lift (Ft.) Headroom Number of Falls Load Chain (Dia./MM) Req. Hand Chain (Ft.) to Lift Load 1' Pounds Pull to Lift Ship 10 1306 L901/2T L901/2T 10 3/4 1.0 29 9 23 32 1 1311 L901T L901T 20 113/4 1 6.3 0 69 29 40 11 1316 L9011/2T L9011/2T 3 131/4 1 7.1 60 91 37 2 1 13 L902T L902T 4400 143/4 1 8.0 77 88 48 63 130 1330 L903T L903T 68 7/8 2 7.1 1 88 6 7 10 130 L90T L90T 100 241/2 2 9.0 190 6 97 132 140 160 16 L90T111/2 L90T 200 111/2 301/2 4 9.0 38 116 9 242
JET L0 Series Hand Chain Hoists Full range capacity 1/2 to tons Compact and portable for ease of positioning material Engineered for commercial and industrial lifting applications All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Completely enclosed Weston type automatic brake system for positive load spotting Triplespur gears provide high efficiency ratio with minimum effort Heat treated and hardened grade 80 load chain Smooth rolled edge on hand chain cover prevents side pull jamming Wide throat drop forged safety hooks for easier rigging Standard hand chain drop equals lift length Complies with OSHA, ANSI/ASME B30.16 and HST2 standards CAUTION Be sure that the supporting structures and loadattaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people. IMPORTANT Before installation, read owner s manual for additional warnings and precautions. Not for use in an explosive environment. 70 Standard Lift (Ft.) Headroom Number of Falls Load Chain (Dia./MM) Req. Hand Chain (Ft.) to Lift Load 1' Pounds Pull to Lift Ship 40 1 L00WO L00WO 10 111/4 1.0 2 3 24.00 34.00 20 31 L01TWO L01TWO 20 11/8 1 6.3 43 64 27.00 39.2 10 11 L010WO L010WO 3300 133/4 1 7.1 7 77 34.2 48.00 0 61 L00WO L00WO 4400 143/4 1 8.0 70 79 44.00 9.00 60 71 L0300WO L0300WO 6600 1/8 2 7.1 114 79 3.00 74.00 70 81 L000WO L000WO 100 23/8 2 9.0 198 7 90.00 119.0 80 91 L000WO L000WO 200 297/8 4 9.0 396 79 174.00 227.00 141
JET JLH Series Lever Hoists 3/4ton to 6ton Capacities Available in ft, ft, and ft lifts Light weight, compact design for low head room applications All units feature premium 0 grade chain for extreme wear resistance Patented fused break disc design for low maintenance Caged roller bearings used on load sprocket increase ease of use and efficiency Lever Hoist with Overload Protection CAUTION Be sure that the supporting structures and loadattaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people. IMPORTANT Before installation, read owner s manual for additional warnings and precautions. Not for use in an explosive environment. 20 Stock No. No. (Tons) Standard Lift (Ft.) Headroom Number of Falls Load Chain (dia/mm) Lever Length Pounds of Pull To Lift Lift Per Full Turn of Lever 3700 370 370 JLH80WO JLH80WO JLH80WO 0.8 1760 11 1.6 9/8 64 11/8 12.0 1.00 19.0 3100 310 310 JLH160WO JLH160WO JLH160WO 1.6 3 13.1 1 7.1 3/8 7 7/8 17.0 21.2 28.0 33000 3300 3300 JLH3WO JLH3WO JLH3WO 3.2 7040 1. 1 16/16 82 3/4 30.00 38.00 3.00 36000 3600 3600 142 JLH630WO JLH630WO JLH630WO 6.3 13860 21.2 1 16/16 84 3/8 7.2 72.00 3.00
JET JLP Series Lever Hoists Economical lever hoist designed for years of troublefree operation 3/4ton to 6ton capacities,, and lifts available All steel construction with a durable powder coat finish Completely enclosed Weston type automatic brake system holds load in any position Easytouse with single hand operation and control Simple design makes routine inspection and maintenance easy Freewheeling feature without load for quick load attachment Hardened grade 80 low wear chain Drop forged hooks with heavyduty safety latches swivel 360 for easy rigging Complies with OSHA, ANSI/ASME B30.21 and HST3 standards CAUTION Be sure that the supporting structures and loadattaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people. IMPORTANT Before installation, read owner s manual for additional warnings and precautions. Not for use in an explosive environment. 187711 Rated (Ton) Standard Lift (Ft.) Min. Distance Between Hooks No. of Falls Load Chain (Dia./MM) Lever Length Pounds Pull to Lift Lift Per Full Turn of Lever Ship 187707 187708 1877 JLP7 JLP7 JLP7 3/4 127/16 1 6 1/4 32 3/4 17 2 187711 187712 187714 JLP10 JLP10 JLP10 11/2 14 1 8 161/8 42 7/8 28 33 43 18771 187716 187718 JLP300 JLP300 JLP300 3 193/4 1 161/8 72 /8 46 4 69 187719 1877 JLP600 JLP600 6 247/16 2 161/8 76 /8 68 113 143
JET JET Material Handling PT Series IndustrialDuty Plain Trolleys Designed for low maintenance and troublefree operation through a wide range of beams 1/2 ton to ton capacity For use with wideflange Hbeams, standard Ibeams, or curved track Multiple spacer washers make beam flange width adjustment quick and easy Rugged steel side plates feature builtin bumper guards Hardened wheels with lubricated for life, double sealed ball bearings compliance: OSHA, ANSI/ASME B30.11 and B30.17 standards 21 20 2 21 2 230 20 260 Dimensions 1/2 PT 1 PT 11/2 PT 2 PT 3 PT PT PT (Ton) 1/2 1 11/2 2 3 Beam Flange Width 21/2 8 3 8 31/4 8 31/4 8 4 8 4/6 8 43/4 8 Beam Height (Ft.) 4 19 Min. Radius Curve 39 39 43 43 1 67 Ship A B C D E F G H I J 1/2 PT 1 PT 11/2 PT 2 PT 3 PT PT PT 83/8" 91/16" 7/8" 117/8" 13/8" 11/16" 171/16" 63/16" 61/2" 6/8" 67/8" 7/16" 77/8" 81/2" 63/16" 61/2" 6/8" 67/8" 7/16" 77/8" 81/2" 1/8" 61/8" 63/8" 611/16" 89/16" 1/16" 11/8" 2/16" 21/16" 33/8" 39/16" 4/16" 413/16" 1/16" 4" 4/8" 47/8" 3/8" 63/16" 63/4" 77/8" 34 43 2 88 129 213 21/2" 8 3" 8 31/4" 8 31/4" 8 4" 8 4/8" 8 43/4" 8 D 4" 41/2" 1/8" 1/4" 6/8" 77/8" 1/8" A F J I E H 19/16" 11/16" 21/2" 29/16" 3" 313/16" " B G C 1/16" 13/16" 1/16" 17/16" 13/4" 23/8" 31/4" JET SBc Series IndustrialDuty Beam Clamps For construction, commercial and industrial vertical or horizontal rigging operations 1ton to ton capacities Mount hoists or lift beams with portable lightweight clamp Adjusts with ease to fit a broad range of wideflange H or standard Ibeams clamp jaw designed to distribute the load away from beam flange edge Low headroom with builtin suspension rod compliance: ANSI/ASME B30.17 and B30. standards 227 caution Read owners manual for additional warnings and precautions before use. Failure to read, understand and follow all instructions can result in serious injury. Do not exceed rated capacity. Use clamp only if authorized and properly trained. Do not move unbalanced load. Not for use in explosive environment. 227 227 22730 2270 Dimensions JBC1 JBC2 JBC3 JBC 144 JBC1 JBC2 JBC3 JBC Dim. Max A 921/32 921/32 11/8 117/32 00 4000 6000 000 Min B 73/32 73/32 927/32 7/16 Beam Flange Width 231/32821/32 231/32821/32 31/1692/32 41/16/8 Ship 12 lbs. 14 lbs. 27 lbs. 34 lbs. Max. B C D E 1411/64 23/4 13/64 99/32 1411/64 229/32 1/4 99/32 1711/32 4/21/32 /16 1/4 193/32 1/2 2/64 1/4 Max. F /16 /16 611/16 61/16 Min. F 33/64 33/64 411/32 41/16 Min. G 13/16 13/16 211/64 23/64 H 13/16 13/16 1 17/64
JET JHJ Series HeavyDuty Industrial Bottle Jacks For lifting, pushing, spreading, bending, pressing or straightening requirements Not affected by temperature extremes Low profile truck models or standard models Electrically welded base and cylinders to assure strength and eliminate leaks All models work in upright, angle or horizontal position Pump handle included carrying handles on 121/2 to 0ton models complies with ANSI/ASME B30.1 and PALD1 standards Rated (Ton) Minimum Height Piston Height Head Screw (H/In.) Max. Height Base Size (LXW/ In.) Ship 43301 43303 4330 43308 43312 43313K 43317 43318K 43322 43323K 4333K 43360K 43399K JHJ2 JHJ3 JHJ JHJ8 JHJ12 1/2 JHJ12 1/2L JHJ17 1/2 JHJ17 1/2L JHJ22 1/2 JHJ22 1/2L JHJ3 JHJ60 JHJ0 2 3 8 121/2 121/2 171/2 171/2 221/2 221/2 3 60 0 71/8 71/2 77/8 77/8 91/2 63/4 3/8 63/4 /8 71/8 11 12 12 41/2 41/2 4/8 4/8 7/8 33/4 61/2 31/2 61/4 33/8 61/4 63/4 23/32 2 23/8 23/4 23/4 31/8 3 31/8 23/4 11/2 13/8 143/8 11/2 11/2 181/2 133/8 13 167/8 12 171/4 8/8 1711/16 41/2 x 21/2 49/16 x 213/16 /8 x 31/4 6 x 31/2 61/2 x 41/8 61/2 x 41/8 71/8 x 4/8 71/8 x 4/8 71/8 x 1/2 71/4 x 1/16 83/8 x 1/2 91/4 x 73/8 1431/32 x 7/16 6 9 13 18 1 24 19 28 23 48 82 22 JET PTX & JTX Series Pallet Trucks Onepiece cast pump features high quality seals, hardened and chrome plated ram and piston, topof stroke and overload bypass valves Rounded fork tips with nylon guide rollers for troublefree pallet entry and exit Solid steel push rod never needs adjustment 2º turning radius Large 8" poly over aluminum steering wheels feature double sealed, life time lubricated bearings (JTX ) 21/2" turning radius (PTX ) Dimensions W1 W2 L1 L2 H1 H2 A B C Ship 140093 PTX2748 00 lbs. 27 6 48 63 61/4 21/2 7 x 2 21/2 x 33/4 471/4 196 140800 JTX2748 8000 lbs. 27 61/4 48 631/2 61/4 31/4 8 x 2 31/4 x 31/2 491/4 240 14
Air Tuggers Michigan Pneumatic Short Drum Tuggers Light, compact tuggers designed for low air consumption and high efficiency. Can be mounted to a wall, floor or ceiling. Can also be mounted to a portable compressor and moved from one job to another. *Allow 1 days for delivery. MPW0AA3SACMB MPW2SACMB MPW2SACMB Michigan Pneumatic Manual Brake s Short Drum No. Line Speed @ Cable 1/4" /16" 3/8" 7/16" 1/2" /8" Air Inlet Thread w/o Rope MPW0AA3SACMB MPW2SACMB MPW2SACMB MPW3036SACMB 10 lbs. 20 lbs. 4400 lbs. 6600 lbs. 121 ft. 213 ft. 147 ft. 688 ft. 47 ft. 476 ft. 383 ft. 384 ft. 2 ft. 3/4" 11/4" 97 lbs. 66 lbs. 86 lbs. 3 lbs. Michigan Pneumatic Automatic Brake s 146 Short Drum No. MPW0AA3SAAB * MPW2SAAB MPW2SAAB * MPW3036SAAB * MPW2SAAB 10 lbs. 20 lbs. 4400 lbs. 6600 lbs. Line Speed @ 121 ft. MPW2SAAB Cable 1/4" /16" 3/8" 7/16" 1/2" /8" 213 ft. 147 ft. 688 ft. 47 ft. 476 ft. Remote control units available for most models. 383 ft. 384 ft. Drum Guards Part No. E3024G E398003G E398001G E398007G E30013G 2 ft. Fits Tool No. MPW0 Series MPW2LAAB MPW2LACMB MPW2LAAB MPW2LACMB MPW2SAAB MPW2SACMB MPW2SAAB MPW2SACMB MPW3036LAAB MPW3036LACMB MPW036LAAB MPW036LACMB Air Inlet Thread 3/4" 11/4" w/o Rope 4 lbs. 88 lbs. 608 lbs. 66 lbs.
Air Tuggers Michigan Pneumatic Long Drum Tuggers Light, compact tuggers designed for low air consumption and high efficiency. Can be mounted to a wall, floor or ceiling. Can also be mounted to a portable compressor and moved from one job to another. *Allow 1 days for delivery. MPHUL Michigan Pneumatic Manual Brake s Long Drum No. MPHUL MPW2LACMB MPW2LACMB MPW3036LACMB MPW036LACMB MPW04LACMB 00 lbs. 20 lbs. 4400 lbs. 6600 lbs. 100 lbs. 100 lbs. Line Speed @ 1 ft. 121 ft. 36 ft. 9 ft. MPW3036LACMB Cable 3/8" 7/16" 1/2" /8" 3/4" 7/8" 144 ft. 1378 ft. 12 ft. 91 ft. 92 ft. 813 ft. 768 ft. 768 ft. 0 ft. 8 ft. MPW036LACMB 4 Piston Unit (shown) NEW MPW04LACMB Piston Unit (not shown) 7 ft. 70 ft. Air Inlet Thread 11/4" 11/4" 2" w/o Rope 62 lbs. 608 lbs. 632 lbs. 1130 lbs. 1890 lbs. 198 lbs. MPW2LAAB MPW036LAAB MPW3036LAAB Michigan Pneumatic Automatic Brake s Long Drum No. Line Speed @ Cable 3/8" 7/16" 1/2" /8" 3/4" 7/8" Air Inlet Thread w/o Rope MPW2LAAB * MPW2LAAB * MPW3036LAAB * MPW036LAAB 20 lbs. 4400 lbs. 6600 lbs. 100 lbs. 121 ft. 36 ft. 1378 ft. 91 ft. 92 ft. 768 ft. 768 ft. 0 ft. 8 ft. 7 ft. 11/4" 11/4" 63 lbs. 64 lbs. 1161 lbs. 1923 lbs. Remote control units available for most models. 147