Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS UPLIGHT DOWNLIGHT Flush lens shown Flush.5 2 FLUSH 75 lm/ft 5 lm/ft 11.9 W/ft 15 lm/w.5" 75 lm/ft 5 lm/ft 11.33 W/ft 11 lm/w 2" 75 lm/ft 5 lm/ft 11.25 W/ft 111 lm/w Please consult factory for custom lumen output and wattage. Ordering Guide SCWDI 1/2 PRODUCT ID NOM. LUMENS/FT UP NOM. LUMENS/FT DOWN CRI COLOR TEMP. SHIELDING (for down only) SCWDI Wall Direct/Indirect 3 3 lm/ft - Minimum 3 3 lm/ft - Minimum 8 8 CRI 27 27 K FL flush 75 75 lm/ft - Maximum 5 5 lm/ft - Maximum 9 9 CRI 3 3 K.5M.5", lum. end cap 35 35 K.5P.5", opaque end cap 4 4 K 2M 2", lum. end cap 2P 2", opaque end cap +BL(#) Blank (for flush option only) Outputs between listed min and max are available. Consult factory for outputs outside of the listed range. 2 Applies to both UP & DOWN. Applies to both UP & DOWN. CONTROL SENSORS All lens options use spotless lens Standard Flush lens on UP 5 LED BOARD & DRIVER YEAR LUMINAIRE WARRANTY LINEAR LENGTH FINISH VOLTAGE DRIVER CIRCUITS 4 4 AP aluminum paint 12 12 V DP dimming (-1V) 1% 1 1 circuit (5) 6 6' W white 277 277 V D dimming (-1V) 5% 347V standard (2) 2 2 circuits (6) 8 8 BLK black 347 347 V (1) LT lutron (3) +E(#) emergency section (7) 12 12 C custom UNV universal BI bi-level dimming +NL(#) night light section (7) S# System Run O other (4) +GTD(#) generator transfer device (7) SCULPT accommodates any length. Metric lengths also available, please consult factory. Applies to UP & DOWN (1) D dimming (-1V) 5% standard Applies to UP & DOWN (2) For 347V only (3) Specify system (4) Please consult factory; see page 2 (5) Control UP & DOWN lights together (6) Control UP & DOWN lights separately. Minimum 3 ft length. (7) Specify quantity BATTERY (OPTIONAL) OTHER (OPTIONAL) IC CONTROLS (OPTIONAL) CUSTOM (OPTIONAL) B# battery pack F fuse (8) DS# daylight sensor (9) C custom 5' minimum Not available with 347V Please consult factory FW(#) flex whip (6 std) OS# occupancy sensor (9) DOS# daylight & occupancy sensor (9) EN# Enlighted integral (9) ENR# Enlighted remote (1) WC# wireless control dimming (8) Requires 12V or 277V (9) For flush option only; Please consult factory. (1) Please consult factory. Applies to both UP & DOWN. Specify quantity. Requires 7" blank. See integrated controls guide for more details. Please specify 1 / 5
LED SYSTEM CRI CCT LED life Thermal Management CONSTRUCTION Housing End Cap Interior Brackets Reflectors Lenses Hanger Suspension Cable Grips ELECTRICAL Minimum 8 or 9 color rendering index Choice of 3K, 35K and 4K color temperature with a great color consistency (within 3. step MacAdam ellipse). Minimum 5,h with 85% of lumen maintenance in 25 C ambient temperature, in compliance with IES LM-8 testing measurements. Aluminum housing acting as the heat sink to maximize life. Extruded aluminum (.8'' nominal) up to Die cast aluminum Die formed sheet steel (2 gauge) White powder coated sheet steel (22 gauge) Extruded acrylic (.6'' nominal) - injection moulded Die cast aluminum Lutron driver* L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%) LDE1 - EcoSystem H-Series (1%) LDE5 - EcoSystem 5-Series (5%) LTE - Hi-Lume A-series 2Wires Forward Phase (1%) *Consult factory Other drivers DALI - Digital Addressable Lighting Interface DMX - Digital Multiplex LV - line voltage - Advance Mark 1 Xitanium SR - For wireless sensor Emergency Integral emergency battery pack or emergency circuit optional. Input Voltage 12V, 277V, 347V, UNV. Incorporating these components may have limitations or affect the length of the luminaire. Please contact factory for more details. WARRANTY Sliding aircraft cable along product length Quick connecting / release Axis lighting will warrant defective LEDs, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications. If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis. SHIELDING - Frosted acrylic Spotless lens FL flush.5m.5", lum. end cap 2M 2", lum. end cap WEIGHT Wall Direct/Indirect 4 ft 8 lbs / 3.6 kg Wall Direct/Indirect 8 ft 16 lbs / 7.3 kg Wall Direct/Indirect 12 ft 24 lbs / 1.9 kg FINISH Aluminum paint, powder coated and custom finishes are also available. JOINERS In order to allow very long runs of SCULPT luminaires, Axis has developed an effective joining system. Special care has been taken to maximize the performance of the joiner for each SCULPT option. NOTE: Mount each system segment individually. Do not assemble system prior to mounting. Allow a minimum of 6" between end of long runs and vertical wall APPROVALS Certified to UL and CSA standards Suitable for damp locations. SYSTEM (S#) SCULPT linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs. Lengths of 4', 8', 12' as well as custom lengths are available. Runs of SCULPT that are greater than 12' in length are designated as systems (S#). This means that the run is comprised of a combination of 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining. OTHER MOUNTING OPTIONS SCULPT LED is also available with surface recessed, pendant and recessed vertical mounted options. Specification sheets and installation sheets for all mounting for SCULPT luminaires are available for download at www..5p.5", opaque end cap 2P 2", opaque end cap 2 / 5
MOUNTING SPACING SCULPT 4' (32" C.C.) SCULPT 8' (8" C.C.) SCULPT 12' (128" C.C.) NOTE: Use stud if possible for mounting LENGTHS SCULPT linear 4ft (with 4ft shielding) 49".5" For all fixture lengths SCULPT linear 8ft Continuous (with 8ft shielding) 97" SCULPT linear 12ft (with 4ft shielding) 145" MOUNTING DETAILS MOUNTING BRACKETS SIDE VIEW OTHER MOUNTING OPTIONS SCULPT LED is also available with surface, recessed, pendant and recessed vertical mounted options. Specification sheets and installation sheets for all mounting for SCULPT luminaires are available for download at www. 3 / 5
PHOTOMETRIC DATA Uplight 6% 75 lm/ft Downlight 4% with Flush lens 5 lm/ft 15 1197 897 598 299 3 12 6 Lumen/ft up: 75 lm/ft Lumen/ft down: 5 lm/ft Total : 54 lm (for 4ft) Input Watts: 47.6 W Efficacy: 15 lm/w CANDELA DISTRIBUTION Angle 22.5 45 67.5 9 943 943 943 943 943 5 932 938 934 938 94 15 884 887 872 86 859 25 788 78 75 723 715 35 656 641 599 559 544 45 58 491 446 48 392 55 361 346 31 279 266 65 227 216 193 174 167 75 11 15 96 88 86 85 21 21 23 24 23 9 1 3 4 4 95 37 4 45 47 47 15 171 171 172 17 168 115 334 332 328 327 322 125 514 514 57 53 497 135 75 75 698 691 686 145 885 883 877 87 866 155 13 131 127 119 117 165 1132 1131 1133 1131 113 175 1185 1191 1187 1183 1181 1193 1193 1193 1193 1193 ZONAL LUMENS -1 89 1-2 245 2-3 345 3-4 375 4-5 346 5-6 28 6-7 194 7-8 13 8-9 27 9 51 9-1 181 1-11 326 11-12 454 12-13 537 13-14 548 14-15 472 15-16 319 16-17 113 17-19 LUMINANCE DATA (cd/m 2 ) Angle 45 9 45 14871 1345 11453 55 1326 11161 9585 65 1188 9429 8163 75 8767 7698 6843 85 4868 554 554 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCWDI-75-5-8-35-F-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 Uplight 6% 75 lm/ft Downlight 4% with.5" 5 lm/ft 15 1125 844 563 281 12 6 3 Lumen/ft up: 75 lm/ft Lumen/ft down: 5 lm/ft Total : 55 lm (for 4ft) Input Watts: 45.3 W Efficacy: 11 lm/w CANDELA DISTRIBUTION Angle 22.5 45 67.5 9 857 857 857 857 857 5 848 852 85 856 859 15 81 88 82 795 795 25 711 716 699 677 669 35 589 59 565 539 529 45 447 455 437 418 41 55 314 328 323 313 38 65 195 215 225 222 218 75 96 122 141 142 14 85 23 49 74 82 82 9 9 34 61 73 74 95 46 7 95 15 16 15 168 184 24 29 28 115 318 329 343 347 344 125 485 492 53 55 51 135 663 667 673 674 67 145 831 83 834 835 831 155 968 969 971 967 963 165 164 164 168 167 165 175 1112 1119 1118 1113 1111 1121 1121 1121 1121 1121 ZONAL LUMENS -1 81 1-2 225 2-3 32 3-4 352 4-5 336 5-6 286 6-7 216 7-8 139 8-9 73 9-1 97 1-11 29 11-12 335 12-13 446 13-14 517 14-15 52 15-16 446 16-17 3 17-16 LUMINANCE DATA (cd/m 2 ) Angle 45 9 45 1295 1432 9167 55 11175 8818 7722 65 936 7428 6426 75 7358 6114 52 85 488 499 4288 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCWDI-75-5-8-35-.5M-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 All IES files are available for download at: www. 4 / 5
PHOTOMETRIC DATA Uplight 6% 75 lm/ft Downlight 4% with 2" 5 lm/ft 15 1114 834 557 278 3 12 6 Lumen/ft up: 75 lm/ft Lumen/ft down: 5 lm/ft Total : 55 lm (for 4ft) Input Watts: 45 W Efficacy: 111 lm/w CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) Angle 22.5 45 67.5 9 587 587 587 587 587 5 577 588 596 65 69 15 542 573 588 598 62 25 478 521 542 554 557 35 391 445 477 497 53 45 3 363 48 439 448 55 213 283 341 372 378 65 138 21 27 296 296 75 74 144 21 217 213 85 27 91 14 149 144 9 16 72 12 129 125 95 51 1 145 153 148 15 169 28 241 243 237 115 318 347 37 372 366 125 482 55 523 525 52 135 658 675 688 689 684 145 824 834 843 847 843 155 957 967 974 974 97 165 151 157 164 167 164 175 199 119 118 114 11 119 119 119 119 119-1 57 1-2 164 2-3 246 3-4 292 4-5 36 5-6 289 6-7 246 7-8 187 8-9 129 9-1 139 1-11 238 11-12 355 12-13 46 13-14 525 14-15 525 15-16 447 16-17 299 17-15 Angle 45 9 45 847 6111 5675 55 7247 5199 4758 65 6182 4331 3811 75 5137 3523 2897 85 4376 2797 214 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCWDI-75-5-8-35-2M-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 All IES files are available for download at: www. 5 / 5