630 Repositioning Adapter for the Original Windscreen This adapter is used to adjust the height and tilt of the original windscreen on the Transalp. Using the two knurled screws on each side, the screen height can be adjusted continuously by a maximum of 6 cm. The fairing screen can be adjusted individually to suit the rider s height or seating position. Often better than using a higher screen! The repositioning adapter is made of stainless steel, which means it will cope well with rain and other weather influences. 520-0120 On-Board Power Socket This on-board power socket comes with a complete set of cables. The stainless steel bracket for the socket is fitted to the top fork brace, together with the brake line guide. The socket is quickly and easily connected directly to the battery with the cable set. 520-0130 Handlebar Conversion for WRP Pro Bar Medium Handlebar The standard Transalp has a simple steel handlebar. Apart from the fact that, after the first fall, the handlebar is bent and can no longer be used, its shape is not ideal. To solve this problem we recommend the extremely rugged, cone-shaped WRP Pro Bar Medium handlebar which has stood numerous tests. Special clamps complete the conversion. The WRP handlebar is ideal for enduro and rallye events and due to its shape it is less tiring on wrists and arms and does not affect endurance. 041-0908 Mirror Extension for The mirror extension puts the mirror in a much better position. This improves the rider s field of vision. This discreet component increases safety and is almost unnoticeable. Parts supplied: left and right side. 040-0649
Spoiler for Windscreen This special spoiler for the windscreen of the Transalp XL700V is perfect for undertaking long, fast motorbike journeys in comfort. There is a significant reduction in turbulence and wind pressure against the helmet. It simply fits onto the windscreen, and is secured using the snap closure. When going offroad, the spoiler is easy to remove in seconds. 520-0182 *non lockable* 520-0180 *lockable* Lighting, Repositioning Adapter Transalp XL700V 631 Xenon Headlight State-of-the-art lighting technology for your Transalp. Very bright Xenon light for considerably safer driving at night. The Xenon light is activated by the high beam and provides much more light. The 20,000 volt transformer uses only 35W to produce double the light. Includes German TÜV type approval, special brackets for the light and for the transformer, complete fitting hardware and detailed fitting instructions. 520-0153 (left side) Fog Headlight The fog headlight has the same housing as our Xenon headlight and provides safe driving in rain, snow or in fog. The Xenon lamp can be fitted with a right-side fog lamp. Kit includes bracket, cables, switch and German TÜV-type approval and need not be registered. 55W H3 bulb is installed. 520-0155 Fog headlight (right) 520-0150 Fog headlight (left) Mini Flashers for The flexibly fitted micro flashers go perfectly with the Transalp. They are easy to fit, and no changes need to be made to your machine. Just fit and go! The set consists of all 4 flashers plus the attachment materials. 520-0134
PART PART 632 Headlight Protector Steel Very effective protection for the headlight. Mounting is very simple. The headlight protector does not have German TÜV-type approval and was developed for off-road use. 520-0142 GPS Handlebar Bracket Adapter The bracket adapter is simply fitted to the handlebar mounting clamps on your Transalp. Our GPS brackets all fit perfectly on its 12-mm brace. For easy, safe attachment of your GPS. With virtually no impairment of the view of the instruments. 520-0230 520-0231 for handlebar risers Hyperpro progressive replacement springs for fork and shock absorber, Honda Transalp from 08 TOURATECH TOURATECH NEW The set includes replacement fork springs and a replacement spring for the shock absorber. The progressive springs have been designed to match the Honda Transalp perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. 040-7405 Hyperpro height lowering kit, 30mm, Honda Transalp `08 040-7406 Hyperpro progressive replacement fork springs, Honda XL700V Transalp 08 040-7404 Touratech Suspension Honda Adventure Bikes Information on Touratech suspension and available variants can be found starting on page 1242!
Touratech Hand Protectors GD for Honda Transalp, from 2008, for steel handlebar, with handlebar risers These hand protectors are made of virtually indestructible plastic; they are modern in design, offer a high level of protection, and can easily be fitted to the Transalp using the fitting sets (included). The hand protector can be combined with various spoilers and then offers optimum protection against wind and weather. A very strong, sturdy construction which has proved itself time and again in many rallies and on other motor cycles. - Hand protector colours: black (X=1), white (X=5), red (X=4), yellow (X=2), blue (X=3) When ordering, please substitute the X on the end of the order number for the number in brackets. 040-709X Spoiler for Touratech Hand Protectors GD 040-730X Radiator Guard, Rear Silencer Transalp XL700V 633 Touratech hand protectors GD for Honda Transalp XL700 aluminium handlebar - Optimum lever protection (brake and clutch levers) - Optimum protection for your hands - Good wind deflection (with spoiler) - Robust even at high speeds - Elegant design enhances the enduro looks - Colours of hand protector and spoiler may be different - Hand protector colours: black (X=1), white (X=5), red (X=4), yellow (X=2), blue (X=3) When ordering, please substitute the X on the end of the order number for the number in brackets. 040-676X Spoiler for Touratech Hand Protectors GD 040-730X Manifold Shield (Centre Right) Very light, strong manifold shield in 2 mm aluminium. Safe protection against the hot manifold pipe. The shield is simply fastened to the original attachment points. 520-0111 Radiator Guard Set Right and Left A faulty radiator can lead to an unscheduled stop. This radiator guard can be fitted for perfect protection of the delicate radiator fins. The two-part guard in strong aluminium offers perfect protection for the right and left of the radiator. This efficiently prevents the radiator from being damaged by stones. 520-0103
PART PART 634 ABS Sensor Protection, Folding Gear Lever Kick Stand Support Extension The original plastic shield does not provide adequate protection against stones and scree. A shield made of 2 mm stainless steel is a distinct improvement. The stainless steel shield screws onto the existing attachment points. 520-0108 front 520-0110 rear Long-Distance Footpegs Lightweight, stylish, folding aluminium gear level for your Transalp. 520-0112 *Works* long-distance foot pegs Honda XL700/650V The Transalp stands much more firmly even on quite a soft surface with this kick stand support extension. Quick and easy to fit. 520-0128 Foot Brake Lever Extension These footpegs have proved to be reliable during our motorbike journeys. They offer considerably wider foot base support and also allow longer distances to be covered while standing on the footpegs. These footpegs also provide more grip as the grip studs have very sharp edges. 520-0160 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots Perfect combination of grip and self-cleaning With a more slender design for better ground clearance Significantly less susceptible to impacts Strengthened mounting point With a blasted surface and laser inscription for a superior finish The foot brake lever extension makes it much easier to operate the rear brake. It increases the size of the surface by 100 %. The extension is made of blasted stainless steel. The looks and function are beautifully balanced. The sharp claws on the surface also offer plenty of support offroad. 520-0165 046-5315 TOURATECH TOURATECH NEW
Crash Bar for Use these crashbars and even major falls will no longer be a horrifying experience. The plastic-coated steel tube is integrated perfectly in the design of the motorbike, and will cope even with the toughest conditions. An intended bending point will protect the frame and screw attachments against damage. The slender design also offers lots of advantages when riding off-road. The two-piece roll bar is easy to fit. All attachment materials included. Footpegs, Engine Guard Transalp XL700V 635 520-0200 Crash Bar Extension for Two additional bars are easily and simply screwed to the crash bar for the engine (520-0200). This measure significantly extends its protective function. Now the fairing and radiator of the Transalp in particular are well protected. Putting an end to expensive repairs or even breakdowns caused by radiator problems. 520-0220 Engine Guard Large We have replaced the less than stable plastic cover with a genuine engine guard. It is made of a combination of 4 mm riveted aluminium panels, and can be fitted in conjunction with our crash bar (520-0200). The decoupled attachment reduces resonance, and will absorb part of the impact energy in the event of contact with the ground. - Cannot be combined with engine guard panel (520-0190). 520-0192 Engine Guard Panel A very strong 3 mm aluminium panel is fitted between the fairings of the frame trusses for optimum protection of the oil reservoir. The engine guard panel is attached in three places, and offers excellent protection against stones and scree. This panel is easy to attach with the two crash bars (520-0200 and 520-0220). 520-0190
636 Chain Guard Delightful, laser-cut protection made of riveted stainless steel and aluminium parts. This gives the chain guard the necessary stability - and makes it as light as possible. Optimum use is made of the existing mounting points when attaching the chain guard, which means it is easy and quick to do. 520-0105 Pinion Guard Strong technical guard made of stainless steel. The appearance is enhanced by an additional aluminium shield. The pinion guard has been specially designed to make it quick and easy to remove extreme dirt after an off-road tour. The original guide plate remains in place when fitting the guard. 520-0170 Throttle Cover An accident can often cause damage to the throttle tube on the Transalp. There s no hope then of continuing the journey. We developed the throttle cover to minimise this risk. It is made of anodised aluminium, easy to fit, and yet still offers efficient protection against damage. 520-0100 REMUS Revolution Rear Silencer Aluminium Honda XL700V Transalp with ABE Beautiful exhaust with a noble look. The workmanship is of very high quality and is convincing right from the start. Weight: approx. 3,4 kg 520-0002
Tank Bag Honda This beautifully shaped, extremely strong tank bag has been developed specifically for your Honda Transalp. This has enabled us to achieve the perfect shape and fit. It also has a zip so you can easily increase the volume to ist full 22 litres. The tank bag is easy to fit, and quickly and easily removed. With the eyelets and enclosed straps, it can also be used as a rucksack. A detachable map bag is also included, of course. Made of Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO. Colours: black, with sewn in, reinforced reflective strips/cords. Dimensions: 35 x 26 x 18/25 cm Capacity: approx. 16/22 litres 055-2601 Chain-, Pinion Guard, Tank Bag Transalp XL700V Water protected 637 Splash Guard This splash guard - which is suitable for off-road - is also available for the Transalp XL700V! It is more effective than the serial part, and the design has already proved itself on numerous journeys. 520-0102 Luggage Rack Aluminium Thanks to the many slits and recesses on the luggage rack aluminium, luggage of almost any shape and size can be safely attached to your bike. The wide shape means that even large items can be secured easily and without difficulty. The luggage rack aluminium is light and yet extremely strong. It comes with all of the attachment materials that are required, including the special spacers. 520-0124
638 Pannier Frames Robust steel pannier frame made from 18 mm diameter steel. Tube with a 2 mm thick wall. - Black plastic coated - Approx. 53 cm width - Easy to fit - Uses standard mounting points - No modifications to rear footrests - Mounting bolts are included. Can be used with ZEGA panniers or other panniers in conjuction with our 18 mm mounting hardware. 051-0066 Incl. indicator repositioning; also suitable for original indicators! Tail Bag for the Rear Seat Dimensions: approx. 32 x 26 x 13/25 cm Volume: 11/20 litres Colours: black, grey 055-2604 Water protected Tail Rack Bag The tail rack bag Transalp has a volume of approx. 5 litres. With a zip fastener, its volume can be increased to approx. 8 litres. Made by KAHEDO from Teflon-coated CORDURA which is both waterrepellent and dirt-resistant. 055-2603 Pic.: Andreas Hülsmann Scotland
Tail Bag, Pannier System Transalp XL700V 639 ZEGA Pro AND-Black ZEGA Pro AND-S ZEGA Pro ZEGA Pro Aluminium Pannier System The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the Transalp. *And-S*: anodised aluminium case For more technical details on the ZEGA Pro panniers visit page 1066 and the following. 102 cm 38 110 cm 45 Delivery schedule of the system: 2 aluminium pannier Zega Pro 1 pannier rack including mounting hardware Transalp XL700V ZEGA Pro ZEGA Pro AND-S ZEGA Pro AND-Black 38/38 litres 052-3511 052-3513 052-3515 45/45 litres 052-3512 052-3514 052-3516
640 High Windscreen Honda Transalp The Transalp windscreen suitable for various model years. Minimises airflow behind the windscreen and offers you very good, silent wind protection. 041-0010 00-07 041-0009 94-99 041-0008 88-93 Headlight Protector Steel Honda Transalp 600/650 from 2000 The framing of the headlight protector Transalp Steel is laser-cut. The grating mounted in the frame is securely welded and the entire headlight protector plastic-powder coated. A very sturdy design which can withstand even large stones. Mounting is very simple. No effect on the function of the windscreen. The headlight protector does not have German TÜVtype approval and was developed for off-road use. 041-0220 Handlebar Risers Honda Transalp - Upright and relaxed riding position - Less strain on shoulders and wrists - Better handling of the motorbike - Polished aluminium or black - For sport bikes: better standing position and less tiring - handlebar 25 mm higher 040-0267 polished aluminium 040-0265 black Crossbar Honda Transalp Now you can mount your equipment. Perfect solution if you don t need a crossbar all the time. The crossbar is anodised and 290 mm long. 040-0603
Handlebar, Fairing, Lighting Honda Transalp 600/650 641 Hand Protectors Honda Transalp 650 - Optimum lever protection (brake and clutch levers) - Hand protector colours: black (0), white (1). When ordering, please substitute the X on the end of the order number for the number in brackets. 040-161X Hand protectors 040-0570 Spoiler black PTFE Steel Braided Brake Lines Honda Transalp 650 from 2000 - Better brake efficiency - More precise feel - German TÜV Type Approval (also available for ABS motorcycles) - Includes washers - More robust than stock lines, especially when used under the most demanding off- road conditions - Durable, UV protection for hose 040-0301 front 040-0302 rear You will find brake fluid on p. 1316. Pic.: Nina & Tom Wyssenbach Iceland
642 Crash Bar Honda Transalp XL 650 V The fairing and tank are at risk on all motorbikes, and this is an area where the Transalp needs extra special protection. We have designed and produced crash bars specifically for the mid-class enduro in order to provide it with the best possible protection. Thus both the tank and the fairing are very well protected against serious damage, whilst the guard follows the lines of the Transalp and integrates beautifully in its overall appearance. This robust guard minimises the risk of expensive repairs. Ideally positioned, and of true benefit to the Transalp. 051-0522 Engine Guard Honda Transalp XL 650 V - Particularly rugged guard - Wide ventilation slots for optimum cooling - Protects manifold, under parts and engine - 3 mm welded aluminium, screwed to existing fixing points and fixed to the chassis bearings using clamps. 040-1269 2000-2002 Radiator Guard Honda Transalp 650 2000 > Effective protection for the water radiator Two anodised aluminium grills are screwed in front of the radiator using the original screws. 040-2400
Engine Guard, Suspension Honda Transalp 600/650 643 Pic.: Peter Schuster Island Rally Footpegs Honda Transalp XL 650 These footpegs have proved to be reliable at our rally events. They offer considerably wider foot base support and also allow longer distances to be covered while standing on the footpegs. These footpegs also provide more grip as the grip studs have very sharp edges. 041-0601 Gear Lever Honda Transalp XL 600/650 Considerably stronger, stylish, folding aluminium gear lever. Ideal for bigger feet. 041-0707 -2006 Chain Guard Honda Transalp XL 650 V - Quick and easy fitting - Optimum use of existing fixing points - Fits very easily - Sporty look - CNC machined aluminium - Natural anodised aluminium - Lightweight 040-1402
644 Tank Bag Honda Transalp We have extensively redesigned the tank bag for the Honda Transalp (1987 to 2007). Features: - Base plate adapted to the shape of the tank - Reinforced side panels for optimal stability - Approx. 12 litres volume, expandable to approx. 17 litres - Lateral, reflecting elastic strap, for example for gloves - Two external pockets on the side with 2-way zips - Large, removable A4 map pocket (28 x 32 cm) with Velcro fasteners - Sturdy carrying handle - Two straps included to enable use as a knapsack or shoulder bag - The tank bag can be removed quickly with snaps and Velcro closures. Colour: black Size (l x w x h): approx. 28 x 24 x 22/32 cm 055-1303 Tank bag 055-0069 Rain cover Made of Teflon-coated CORDURA, thus waterproof and dirt-resistant. Made in Germany by KAHEDO. Water protected Tail Rack Bag Honda Transalp This versatile tail rack bag for the powerful Honda enduro bikes offers 13 litres of carrying capacity. It is tailored to the small tail rack and fastened with four straps that mount on the rack. An additional strap secures the bag in place when fully packed. The bag features a sponge rubber base for non-slip limpet attachment. A circular zip expands the bag to approx. 22 litres of capacity. Made in Germany by KAHEDO. Size: approx. 35 x 25 x 15, expands to approx. 35 x 25 x 25 cm 055-1205
Bags, Pannier Systems Honda Transalp 600/650 Complete Pannier System ZEGA Pro, Honda Transalp XL 650 V The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. 645 Transalp 600/650 ZEGA Pro ZEGA Pro AND-S ZEGA Pro AND-Black 38/38 litres 052-3531 052-3533 052-3535 45/45 litres 052-3532 052-3534 052-3536 38 99 cm 45 107 cm Progressive fork springs for Honda XL600V Transalp These progressive fork springs are perfectly matched to the fork on the Honda XL600V Transalp.They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro. 058-5851 *up to 1999* 058-5853 *2000-2007* Hyperpro progressive replacement springs for fork and shock absorber, Honda XL600/650V Transalp *2000-2007* 058-5852 058-5854