Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.

Similar documents
RoHS. Specifications. Part Number Configurator

Anti vandal switch.

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors

CIT SWITCHTM ANT SPECIFICATIONS

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

PRODUCT MATRIX SELECTION. SERVICE. SPEED.

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.

Miniature Stainless Steel Vandal Resistant

Product Range. Keylock Switches. Keylock Switches. Keylock Switches

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

Pushbutton Switches Sub-Miniature

ANT. Materials. Features. Miniature Toggle

C&K DA Series Miniature Single Pole Rocker Switches

SERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c.

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

Series. Robust and attractive.

KSC Series Sealed Tact Switch for SMT

Miniature Switches & Pilot Devices

SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES

PTS645 Series 6 mm Tact Switches

Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER

Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

KSA & KSL Series Sealed Tact Switch

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER

Sealed pushbutton switches - bushing Ø 16 mm - momentary

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood

Series WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

KSA & KSL Series Sealed Tact Switch

Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS

Common features. Installation options. Aesthetic options

TP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches

ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

8000 series Momentary or alternate action pushbutton switches

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

Sealed Vehicle Rocker (SVR)

Distinctive Characteristics

AV series Anti-vandal and security pushbutton switches

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

ELECTRICAL SPECIFICATIONS

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator

Distinctive Characteristics

Distinctive Characteristics

18000 series Snap-action momentary pushbutton switches

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

8500 Series Subminiature Pushbutton Switches

No. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC

Power rocker switches with protection guard

B3F. Miniature, Space-saving Switch

K12 High Performance Key Switches

E Series Sealed Miniature Toggle Switches

K12 High Performance Key Switches

AV SERIES PUSHBUTTON SWITCHES Distinctive features

Only 21.5mm depth behind panel with LED Full Face, Illumination.

SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)

K12 High Performance Key Switches

8020 Series Snap-acting Momentary Pushbutton Switches

7000 Series Miniature Rocker & Lever Handle Switches

T Series Subminiature Toggle Switches

Selection guide - Section B1 «I» range

Bright illumination face and snap-action switching.

KSB & KSF Series Low-profile Tact Switch

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm

7000 Series Miniature Rocker & Lever Handle Switches

M8 Series. Key features: BUCCANEER

7000 Series Miniature Toggle Switches

Switches. Common Used Terminology:

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

22mm Push Buttons and Switches

Switches. Introduction

7000 Series Miniature Toggle Switches

onlinecomponents.com

ø8 A8 Series Miniature Control Units

3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

E Series Sealed Miniature Rocker and Lever Handle Switches

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

RTA Series 1 4 Poles Coded Rotary Switches

Attractive rugged rocker switch

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter

C&K E Series Sealed Miniature Toggle Switches

13000 series Professional quick-break momentary pushbutton switches

General_technical_data Series

1 change over contact. 1 make contact. 1 break contact

Transcription:

Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance: 000MΩ Max. Operating/Storage Temperature: -20 C to 55 C Travel: 20mm Moisture Protection: IP0 (PV3,PV3S) & IP67 (PV3W, PV3SW) Contact Arrangement: SPST & DPDT Actuation Force: N Panel Thickness: -8mm Mounting Nut Torque: 0.6Nm Kiosks Electrical Housewares Features & Benefits 6mm diameter panel cutout Dot and ring illumination options Multiple actuator options Non-sealed and seal option configurable SPST & DPDT Medical Equipment RoHS Part Number Configurator Series PV3 - Non Water-Resistant Version: Long Body PV3S - Non Water-Resistant Version: Short Body Non-Illuminated only PV3W - Water-Resistant Version: Long Body PV3SW - Water-Resistant Version: Short Body Non-Illuminated only Actuator Terminal F - Flat 2 - Solder H - High G - Guarded Concave Function B - Pole On - (On)* H - 2 Pole On - (On)* Rating 0-2A, 8VDC Body Finish - Black Anodized N - Nickel B - Brushed S - Polished Actuator Finish Contact Material 0 - Clear/ NONE - Silver Aluminum G - Gold - Black Anodized 7 - Blue 8 - Green 9 - Red N - Nickel B - Brushed S - Polished Lens Style NONE - Non- Illuminated 2 - Dot Illumination 3 - Ring Illumination Lens Color NONE- Non- Illuminated 0 - White - Red 2 - Orange 3 - Green - Blue 5 - Yellow Illumination Voltage NONE- Non- Illuminated - Base Voltage / 3-6V - 2V 5-2V 6-25V NOTES: *( ) denotes function is momentary Specifications Specifications subject to subject change to without change notice without.2.208 notice www.e-switch.com 80067.277

6.00 THICKNESS -8.0mm 29.7.0 [.7.0 in] 5.0 [.59 in] 2.3 [.96 in] M6x.0 3 2 3. 3 2 2 [. in] SPDT ON-(ON) (MOMENTARY) TERMINAL SHORT BODY www.e-switch.com 80067.277 2

SHOWN WITH OPTIONAL ILLUMINATED RING 6.00 36.0.0 [.2.0 in] 8.5 [.73 in] 3 (+) 0.0 30.2 [.9 in] 2.50 [.098 in] 37..0 [.6.0 in]. 2 [. in] (+) 3 2 (-) 9.0 [.35 in] M6x.0 THICKNESS -.0mm RoHS 3 2 LED (FORWARD) + - (+) (-) - + LED 2 (REVERSE) SPDT ON-(ON) (MOMENTARY ILLUMINATED) LED (+) TERMINAL LED 2 (-) LONG BODY www.e-switch.com 80067.277 3

6.00 THICKNESS -8.0mm 29.7.0 [.7.0 in] 5.0 [.59 in] 2.3 M6x.0 [.96 in] 3 2 5.0 [.20 in] 3 6. 6 5 2 [. in] DPDT ON-(ON) 6 5 TERMINAL TERMINAL 6 TERMINAL 5 TERMINAL SHORT BODY www.e-switch.com 80067.277

SHOWN WITH OPTIONAL ILLUMINATED RING 6.00 36.0.0 [.2.0 in] 0.0 8.5 [.73 in] 30.2 [.9 in] 37..0 [.6.0 in] M6x.0 THICKNESS -.0mm RoHS 3 2 TERMINAL 5.0 [.20 in] 3 6 (+) LED (+) TERMINAL 6 TERMINAL 5 TERMINAL. 9.0 [.35 in] LED 2 (-) (+) (-) 6 5 2 [. in] 6 5 LED (FORWARD) + - (+) (-) - + LED 2 (REVERSE) DPDT ON-(ON) (ILLUMINATED) LONG BODY www.e-switch.com 80067.277 5

Illumination [.7 in] DOT ILLUMINATED [.7 in] RING ILLUMINATED RING ILLUMINATED 0 [.65 in] DOT ILLUMINATED RING ILLUMINATED 0.0 [. in] RING ILLUMINATED 0.0 WITH GUARDED CONCAVE ACTUATOR Actuator 8.0 [.7 in] 8.0 [.7 in] [.6 in] 8.0 [.7 in] 0.0.5 [.06 in] 3.9 [.5 in] 3.7 [.5 in] FLAT ACTUATOR HIGH ACTUATOR GUARDED CONCAVE www.e-switch.com 80067.277 6