SINGLE DUCT TERMINAL UNITS 3000 SERIES

000 SERIES 000 SERIES VRIBLE OR CONSTNT VOLUME PRODUCT OVERVIE Nailor 000 Series Single Duct Terminal units are simply put, versatile. hether the requirement calls for a constant or variable air volume (VV) single duct terminal, an electric or hot water reheat option or requires basic attenuation, the 000 Series terminal units deliver. vailable in numerous configurations, each 000 Series is designed to control airflow in response to a control signal. t the center of each unit is the control damper. Constructed of a single blade on smaller units or inclined opposed blades on larger units, the damper provides a more linear flow characteristic than the typical butterfly type. The result is a more accurate flow control, thus providing a more stable zone temperature. The pressure independent 000 Series terminal units operate in both constant and variable flow configurations. Unlike a constant volume system, which is sized for the peak demand of the entire building, a VV system is sized for the instantaneous peak demand of all zones. Since VV systems modulate airflow based on demand, operating costs are generally reduced compared to constant volume systems as less fan energy and refrigeration is needed. Numerous options on the 000 Series allow for application specific customization. Options range from different insulation types, reheat versions, attenuators, control sequences, low temperature and ultra low casing leakage construction to access doors. Controls options include digital, analog electric and pneumatic types suitable for most applications. Depending on the selected controls option, a full NEM 1 type low voltage enclosure may be included. ll pressure independent control options utilize the multi-point averaging Nailor Diamond Flow sensor to measure velocity pressure. 001 Cooling or eating Only 0R Cooling with ot ater Reheat 0RE Cooling with Electric Reheat

000 SERIES SINGLE DUCT VRIBLE OR CONSTNT IR VOLUME 000 SERIES Models: 001 Cooling or eating only 0R Cooling with ot ater Reheat 0RE Cooling with Electric Reheat Inclined opposed blade damper configuration minimizes noisy turbulence and provides smooth, accurate, near linear flow control. Model 001 The 000 Series Single Duct Terminal Units form the backbone of Nailor's single duct line. Utilizing an inclined opposed blade damper, the 000 Series exhibit a more linear flow characteristic than the common butterfly type. Used in constant volume or VV applications, the 000 series provides minimal system pressure drop while offering maximum system flexibility. 000 Series units are available with electric and hot water reheat as well as options like removable flow sensors and access doors. Each unit is available with multiple insulation types, ranging from standard fiberglass to Indoor ir Quality (IQ) types. STNDRD FETURES: 22 ga. (0.86) zinc coated steel casing, mechanically sealed, low leakage construction. Leakage is less than 1% of the terminal rated airflow at 1" w.g. (249 Pa). 16 ga. (1.6) corrosion-resistant steel inclined opposed blade damper with extruded PVC seals (single blade on size 4, and 6). 4 rotation, C to close. tight shut-off. Damper leakage is less than 2% of nominal flow at " w.g. (746 Pa). Self-lubricating Celcon bearings. dia. plated steel drive shaft. n indicator mark on the end of the shaft shows damper position. Inclined opposed blade damper is inherently more linear in its flow characteristics than the standard butterfly type damper. More accurate flow control is ensured, which reduces hysteresis for more stable control of the temperature in the zone. vailable in 11 unit sizes to handle from 0 800 cfm (0 917 l/s). Maximum unit height is only 12 (18) for sizes 4 through 16. Unit sizes 4 through 10 feature round inlets and 12 through 16 features flat oval equivalent inlets. 24 x 16 features a rectangular inlet. Multi-point averaging Diamond Flow Sensor. luminum construction. Supplied with balancing tees for field calibration and balancing. Rectangular discharge with slip and drive cleat duct connection. Full NEM 1 type low voltage enclosure for factory mounted controls. /4" (19) dual density fiberglass insulation maximizes acoustical and thermal performance. 4 lb. high density skin is treated to resist abrasion and erosion from airflow. Edges are coated. Meets requirements of NFP 90 and UL 181. Single point electrical or pneumatic main air connection (except 600V with electric heat). Right-hand controls location is standard (shown) when looking in direction of airflow. Optional left hand controls mounting is available. Unit is flippable. Caution: If unit has access door. Independently tested and certified laboratory performance data. Options: Steri-Liner. Fiber-Free Liner. Solid metal liner. Removable Flow Sensor. 1" (2) Fiberglass liner. Bottom access door. 24 VC Control transformer. anger bracket. Controls enclosure for field or factory mounted controls. Dust tight enclosure seal. Low temperature construction (thermally isolated inlet collar and non porous steri-liner construction). Ultra Low Leakage casing. Bottom mount controls enclosure. 6

000 SERIES Dimensions Model 001 Basic Unit nalog Electronic and Digital Controls full NEM 1 controls enclosure is provided for factory mounted controls. Optional for field mounted controls. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS SLIP ND DRIVE CONNECTION nalog Electronic and Digital Controls with Bottom Mount Control Enclosure MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" 11" (279) IRFLO (140) (140) 1 (94) DMPER DRIVESFT 14" (6) 1 (94) OPTIONL CCESS DOOR 6" OPTIONL CCESS DOOR IRFLO 6" DMPER DRIVESFT 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS SLIP ND DRIVE CONNECTION 11" (279) 14" (6) 11" (279) Pneumatic Controls Universal pneumatic control mounting panel features double wall stand-off construction for strength and rigidity. Controls mounting screws do not penetrate terminal casing. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR UNIVERSL PNEUMTIC CONTROL MOUNTING PNEL ND PROTECTIVE SROUD 6 (16) IRFLO DMPER DRIVESFT /4" 14 (68) (146) 1 (94) (140) OPTIONL CCESS DOOR /4" (146) SLIP ND DRIVE CONNECTION 7

000 SERIES Dimensions Model 001 Integral Sound ttenuator nalog Electronic and Digital Controls Single continuous length terminal construction minimizes casing leakage. Continuous internal insulation reduces insulation seams and minimizes airflow disturbance. Supplied with same liner as basic unit. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" Pneumatic Controls CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS IRFLO 11" (279) (140) DMPER DRIVESFT 14" (6) 1 (108) 6" OPTIONL CCESS DOOR Single continuous length terminal construction minimizes casing leakage. Continuous internal insulation reduces insulation seams and minimizes airflow disturbance. Supplied with same liner as basic unit. SLIP ND DRIVE CONNECTION MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR UNIVERSL PNEUMTIC CONTROL MOUNTING PNEL ND PROTECTIVE SROUD SLIP ND DRIVE CONNECTION 6 (16) IRFLO DMPER DRIVESFT /4" (146) (140) 14 (68) OPTIONL CCESS DOOR 1 (108) /4" (146) 8

000 SERIES Dimensions Model 0R ot ater Reheat Coil One, two, three and four row available. ot water coils have copper tubes and aluminum ripple fins. Coils have, 7/8" (22) or 1 /8" () O.D. sweat connections. Right or left hand coil connection is determined by looking through the terminal inlet in the direction of airflow. Galvanized steel casing with slip and drive discharge duct connection. nalog Electronic and Digital Controls MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 11" (279) IRFLO 14" (6) 1 (94) OPTIONL CCESS DOOR nalog Electronic and Digital Controls with Bottom Mount Controls location (140) Optional low leakage gasketed access door is recommended for coil access and cleaning. RI Certified coils. Coil Performance data on pages 40-48. DMPER DRIVESFT SLIP ND DRIVE CONNECTION L MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR (140) 22 (72) L SLIP ND DRIVE CONNECTION IRFLO 6" 11" (279) CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS DMPER DRIVESFT 14" (6) OPTIONL CCESS DOOR DIMENSION "L" 1 OR 2 RO COILS, L = " (127) OR 4 RO COILS, L = 7" 1/2 (191) Pneumatic Controls MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR UNIVERSL PNEUMTIC CONTROL MOUNTING PNEL ND PROTECTIVE SROUD SLIP ND DRIVE CONNECTION 6 (16) IRFLO DMPER DRIVESFT /4" (146) (140) 14" (6) 1 (94) OPTIONL CCESS DOOR L 9

000 SERIES Dimensions Model 0R Integral ttenuator plus ot ater Reheat Coil ll the benefits of both the Integral Sound ttenuator and the ot ater Coils in one. Coil performance data on pages 40-48. nalog Electronic and Digital Controls MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 11" (279) IRFLO (140) 14" (6) DMPER DRIVESFT 1 (108) SLIP ND DRIVE CONNECTION L OPTIONL CCESS DOOR nalog Electronic and Digital Controls with Bottom Mount Controls Location Single continuous length terminal construction minimizes casing leakage. Continuous internal insulation reduces insulation seams and minimizes airflow disturbance. Supplied with same liner as basic unit. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR (140) 1 (108) L SLIP ND DRIVE CONNECTION 6" 11" (279) CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS DMPER DRIVESFT 14" (6) DMPER DRIVESFT OPTIONL CCESS DOOR Dimensional Data Unit Inlet Coil Connections 1 Row 2 Row Row 4 Row ot ater Coil L (1 & 2 Row) L ( & 4 Row) 4 10 (24) 10 (24) 7/8 (98) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 (24) 10 (24) 4 7/8 (124) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 6 10 (24) 10 (24) 7/8 (149) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 7 12 (0) 12 1/2 (18) 6 7/8 (17) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 8 12 (0) 12 1/2 (18) 7 7/8 (200) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 9 14 (6) 12 1/2 (18) 8 7/8 (22) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 14 (6) 12 1/2 (18) 9 7/8 (21) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 12 18 (47) 12 1/2 (18) 12 1/16 x 9 1/16 (29 x 249) Oval 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 14 24 (610) 12 1/2 (18) 16 1/16 x 9 1/16 (408 x 249) Oval 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 16 28 (711) 12 1/2 (18) 19 /16 x 9 1/16 (487 x 249) Oval 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 24 x 16 8 (96) 18 (47) 2 7/8 x 1 7/8 (606 x 40) Rect. 7/8 (22) 7/8 (22) 1 /8 () 1 /8 () (127) 7 1/2 (191) 10

000 SERIES Dimensions Model 0RE Integral Electric Reheat nalog Electronic and Digital Controls Electric coil is factory mounted in an integral extended plenum section. Perforated diffuser plate minimizes air stratification. Full details and selection guide on page 49. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 11" (279) IRFLO (140) PRIMRY IR VLVE CONTROLS ENCLOSURE 29" (77) 1" (787) OPTIONL CCESS DOOR SLIP ND DRIVE CONNECTION ELECTRIC COIL CONTROLS ENCLOSURE (INGED CCESS DOOR) nalog Electronic and Digital Controls with Bottom Mount Control Enclosure MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR OPTIONL CCESS DOOR 11" (279) SLIP ND DRIVE CONNECTION 6" DMPER DRIVESFT IRFLO 6" (CONTROL ENCLOSURE & TERMINL) CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS PRIMRY IR VLVE CONTROLS ENCLOSURE (140) 29" (77) 1" (787) ELECTRIC COIL CONTROLS ENCLOSURE (INGED CCESS DOOR) (CONTROL ENCLOSURE & TERMINL) 6" 11

000 SERIES Options: FMI Removable Flow Sensor Round or Flat Oval Inlet The (FMI) Removable Flow Sensor is a multipoint averaging airflow sensor. Designed to provide accurate sensing by sampling air velocities in four quadrants of a duct, the differential pressure flow sensor provides an averaged reading at an amplification of approximately 2. times the velocity pressure, dependent upon nominal size. GROMMET SUPPORT BRCKET GSKET /16" () DI. O.D. FLO DIRECTION LBEL SCRE INSERT TO DUCT T PERIMETER OLES SCRE ED IG PRESSURE CONNECTIONS FOR 1/4" (6) O.D. FR TUBING LO PRESSURE Features: Removable for cleaning. ll metal construction - no combustible materials in the air stream. mplifies velocity pressure approximately 2. times to give a wide range of useful output signal vs. flow. Compact size allows for easy removal in tight spaces. Sensor design minimizes pressure drop and regenerated noise. Label provided on each unit gives airflow direction. Multi-point sensing gives an accurate output signal with a maximum deviation of only ± % with a hard 90 degree elbow, provided a straight inlet condition with a minimum length of two equivalent duct diameters is provided. SUPPORT GROMMET BRCKET GSKET FLO DIRECTION LBEL ROUND OR FLT OVL INLET Rectangular Inlet /16" () DI. O.D. SCRE INSERT TO DUCT T PERIMETER OLES IRFLO DIRECTION IG PRESSURE RETNGULR INLET IRFLO DIRECTION CONNECTIONS FOR 1/4" (6) O.D. FR TUBING LO PRESSURE ccess Door Ultra-low leakage, premium quality and performance. Flat oval design. Die formed 22 ga. (0.8) galvanized steel flanged frame and door panel. Positive bulb door seal. Plated steel camlock fasteners. 1" (2) insulation with 22 ga. (0.8) galv. backing plate. Leakage tested in conformance with British Standard D/142 Class C. See 0800-1 submittal for more detailed information. Terminal Unit 4 12 14 24 x 16 Nominal Door 8" x " (20 x 127) 12" x 6" (0 x 12) Max. Leakage 8" w.g. (2 kpa) cfm 0.06 cfm (1.02 l/min.) 0.064 cfm (1.8 l/min.) 12

000 SERIES FF Round Discharge Collar 4" (102) SIDE VIE NOM. - 1/8" () 2" (1) END VIE Unit FF Outlet / Oval 4,, 6 4,, 6 (102, 127, 12) 7, 8 7, 8 (178, 20) 9, 10 9, 10 (229, 24) 12, 14, 16 12 1/2 (18) 24 x 16 N/ Ultra Low Leakage Casing (ULC) Option, CFM (l/s) Inlet Pressure, w.g. (Pa) 0." (124) 1.0" (249) " (746) 6" (1049) 4,, 6 1 (0.) 1 (0.) (1) 6 () 7, 8 1 (0.) 2 (1) 4 (2) 7 () 9, 10 1 (0.) 2 (1) 4 (2) 8 (4) 12 2 (1) (1) (2) 9 (4) 14 2 (1) (1) (2) 9 (4) 16 2 (1) (1) (2) 10 () 24 x 16 (1) 4 (2) 6 () 12 (6) The ULC option consists of silicone applied to all internal seams during assembly, resulting in an air tight casing to meet the strictest project specifications. Standard Leakage Casing, CFM (l/s) Inlet Pressure, w.g. (Pa) 0.2" (62) 0." (124) 1.0" (249) 4,, 6 (1) 4 (2) (1) 7, 8 2 (1) (1) 7 () 9, 10 2 (1) (1) (2) 12 2 (1) (1) 6 () 14 (1) 4 (2) 4 (2) 16 (1) 4 (2) 6 () 24 x 16 7 () 9 (4) 7 () 1

000 SERIES ccessories: ccessories ordered as separate models. MO (Multi-Outlet ttenuator) MO0 (916) Long MO0 (124) Long 6" (914) OR 9" (1499) SIDE VIE 4" (102) TYPICL END VIE 4" (102) TYPICL Unit FETURES: 22 ga. (0.86) galvanized steel construction, mechanically sealed, low leakage construction. Shipped loose for field attachment. Only one outlet size to be specified per M.O.. No mixing of outlet sizes on the same unit. Number and size of outlets on M.O.. not to exceed the limits listed in table, both maximum quantity of outlets and maximum size of outlet. ll round outlets include manual dampers with hand locking quadrant. /4" (19) dual density insulation, exposed edges coated to prevent erosion. Denotes inlet airflow direction. Slip and drive cleat duct connection. For special outlet sizes and arrangements, consult your Nailor representative. No. of Outlets Outlet 4,, 6 10 (24) 10 (24) 1, 2, or 6 7, 8 12 (0) 12 1/2 (18) 2,, 4 or 9, 10 12 6, 8 (12, 20) 14 (6) 12 1/2 (18), 4 or 8 (20) 14 (6) 12 1/2 (18) 2, or 4 10 (24) 18 (47) 12 1/2 (18) 4 or 8 (20) 18 (47) 12 1/2 (18), 4 or 10 (24) 14 28 (711) 12 1/2 (18) 4 or 10 (24) 16 28 (711) 12 1/2 (18) 4 or 10 (24) OPTIONS: Steri-Liner. Fiber-Free Liner. 1" (2) Fiberglass Liner. Standard Outlet rrangements B C D E F G J K T Discharge Sound ttenuator T0 (916) Long T0 (124) Long D OPTIONL CCESS DOOR L = 6" (914) OR 9" (1499) SIDE VIE FETURES: 22 ga. (0.86) galvanized steel construction. Shipped loose for field attachment. Slip and drive connection. /4" (14) dual density fiberglass insulation, exposed edges coated to prevent erosion as standard. END VIE Unit D 4,, 6 10 (24) 10 (24) 12 (0) 7, 8 12 (0) 12 1 2 (18) 12 (0) 9, 10 14 (6) 12 1 2 (18) 12 (0) 12 18 (47) 12 1 2 (18) 12 (0) 14 24 (610) 12 1 2 (18) 12 (0) 16 28 (711) 12 1 2 (18) 12 (0) 24 x 16 8 (96) 18" (47) 12 (0) OPTIONS: Steri-Liner. Fiber-Free Liner. Solid Metal Liner. 1" (2) Fiberglass Liner. 2" (1) Fiberglass Liner. Perforated Metal Liner. Steri-Liner with Perforated Liner. ccess Door s 4 to 12 : 8" x " (20 x 127) Oval; s 14 to 24 x 16: 12" x 6" (0 x 12) Oval. Note: Select Insulation to match VV terminal. 14

000 SERIES Recommended irflow Ranges For Single Duct Pressure Independent Terminal Units The recommended airflow ranges below are for 000 Series single duct terminal units with pressure independent controls and are presented as ranges for total and controller specific minimum and maximum airflow. irflow ranges are based upon maintaining reasonable sound levels and controller limits using Nailor's Diamond Flow Sensor as the airflow measuring device. For a given unit size, the minimum, auxiliary minimum (where applicable) and the maximum flow setting must be within the range limits to ensure pressure independent operation, accuracy and repeatability. Minimum airflow limits are based upon.02" w.g. ( Pa) differential pressure signal from Diamond Flow Sensor on analog/ digital controls and.0" (7.) for pneumatic controllers. This is a realistic low limit for many transducers used in the digital controls industry. Check your controls supplier for minimum limits. Setting airflow minimums lower, may cause damper hunting and result in a failure to meet minimum ventilation requirements. Factory settings will therefore not be made outside these ranges; however, a minimum setting of zero (shut-off) is an available option on pneumatic units. here an auxiliary setting is specified, the value must be greater than the minimum setting. The high end of the tabulated Total irflow Range on pneumatic and analog electronic controls represents the Diamond Flow Sensor's differential pressure reading at 1" w.g. (249 Pa). The high end airflow range for digital controls is represented by the indicated transducer differential pressure. Imperial Units, Cubic Feet per Minute Unit Inlet Type Total irflow Range, cfm Metric Units, Liters per Second irflow at 2000 fpm Inlet Velocity (nom.), cfm Model 0RE SRE 10 "Performance Rating of ir Terminals" is the method of test for the certification program. The "standard rating condition" (certification rating point) airflow volumes for each terminal unit size are tabulated below per RI Standard 880. These air volumes equate to an approximate inlet velocity of 2000 fpm (10.2 m/s). hen digital or other controls are mounted by Nailor, but supplied by others, these values are guidelines only, based upon experience with the majority of controls currently available. Controls supplied by others for factory mounting are configured and calibrated in the field. irflow settings on pneumatic and analog controls supplied by Nailor are factory preset when provided. Range of Minimum and Maximum Settings, cfm Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( "w.g.) Min. Max. Min. Max. Min. Max..0 1.0.02 1.0.02 1.0 1.2 1. 4 0 22 10 0 180 2 180 2 180 200 22 Round 0 400 20 2 4 2 4 2 60 400 6 0 0 400 80 40 6 40 6 40 00 0 7 0 800 0 11 60 9 60 9 60 72 800 8 0 1100 700 1 900 12 900 12 900 1000 1100 Round 9 0 1400 900 200 110 16 110 16 110 128 1400 10 0 1840 1100 260 100 21 100 21 100 167 1840 12 0 200 1600 200 290 200 290 200 200 200 14 Flat Oval 0 12 2100 440 20 60 20 60 20 280 12 16 0 72 2800 2 040 40 040 40 040 400 72 24 x 16 Rect. 0 80 0 1180 6800 960 6800 960 6800 7600 80 Unit Inlet Type Total irflow Range, l/s irflow at 10.2 m/s Inlet Velocity (nom.), l/s Range of Minimum and Maximum Settings, l/s Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( Pa ) Min. Max. Min. Max. Min. Max. 7. 249 249 249 11 74 4 0 106 71 14 8 12 8 12 8 94 106 Round 0 189 118 26 1 21 1 21 1 170 189 6 0 260 189 8 212 1 212 1 212 26 260 7 0 78 260 4 07 4 07 4 07 42 78 8 0 19 0 7 42 9 42 9 42 472 19 Round 9 0 661 42 94 4 78 4 78 4 606 661 10 0 868 19 12 708 101 708 101 708 790 868 12 0 1180 7 168 967 17 967 17 967 108 1180 14 Flat Oval 0 147 991 208 120 170 120 170 120 14 147 16 0 178 121 248 14 20 14 20 14 1604 178 24 x 16 Rect. 0 91 22 7 209 4 209 4 209 86 91 1

16 000 SERIES Performance Data NC Level pplication Guide 000 Series Basic Unit Fiberglass Liner Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet NC Levels @ Inlet Pressure ( Ps) shown DISCRGE (basic assembly) DISCRGE w/ 6" (914) attenuator RDITED Ps cfm l/s "w.g. Pa Min. 0." 1.0" 1." 2.0".0" Min. 0." 1.0" 1." 2.0".0" Min. 0." 1.0" 1." w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. Ps Ps Ps (12 Pa) (20 Pa) (7 Pa) (00 Pa) (70 Pa) (12 Pa) (20 Pa) (7 Pa) (00 Pa) (70 Pa) (12 Pa) (20 Pa) (7 Pa) 22 106 0. 1 21 * 0 4 6 - * 20 2 24 26 - * - 2 2 29 200 94 0.4 106 20 2 29 4 - - - 2 24 2 - - - 21 24 28 10 71 0.24 61-21 26 29 0 0 - - - - 20 20 - - - 21 22 22 100 47 0.11 28 - - 21 21 21 21 - - - - - - - - - - 20 2 7 0.06 16 - - - - - - - - - - - - - - - - - 20 400 189 0 48-2 0 7 - - 20 2 2 28 - - - 2 26 1 00 142 0.11 28-26 4 6 8 - - 2 24 26 29 - - - 21 2 28 20 118 0.08 20-2 0 4 6 - - 20 24 2 26 - - - - 22 2 200 94 0.0 1-2 26 0 1 - - - 20 21 2 - - - - 20 22 12 9 0.02 - - 20 21 21 21 - - - - - - - - - - - - 0 260 0.08 19-26 6 8 41 - - 2 26 29 - - 20 2 28 1 40 212 0.06 14-28 6 9 41 - - 2 26 0 - - - 22 24 29 400 189 0.0 12-28 6 9 41 - - 2 26 0 - - - 21 2 29 200 94 0.02 4-2 28 0 1 0 - - 20 2 24 2 - - - - - 20 100 47 0.01 2 - - - - - - - - - - - - - - - - - - 800 78 0.17 44 2 29 6 9 44-20 24 28 1 6 2-22 28 7 60 07 0.12 29 2 2 1 8 4 - - 2 26 0 20-21 24 29 4 0 260 0.08 21-2 0 4 7 9 - - 2 26 29 1 - - - 24 28 2 18 0.0 8 - - 2 28 29 0 - - - - 20 20 - - - 20 22 24 22 106 0.01 2 - - 21 2 2 2 - - - - - - - - - - - - 1100 19 0.0 6 24 29 6 8 44-21 24 28 0 6-20 2 29 1 900 42 0.02 20 26 0 4 7 41 - - 2 2 29 4 - - 2 26 29 700 0 0.01 2-24 29 6 40 - - 20 2 28 - - 21 24 26 1 600 28 0.01 2-21 29 4 6 9 - - 21 26 29 1 - - - 2 2 1 400 189 0.01 2 - - 2 29 1 4 - - - 21 2 2 - - - 20 21 2 1400 661 0.01 2 21 29 8 41-2 26 29 6 20 20 2 28 4 8 120 90 0.01 2-28 1 7 41-21 2 29 1 6-20 22 26 6 900 42 0.01 2-2 28 6 40 - - 21 26 0 - - - 2 28 1 67 19 0.01 2 - - 28 7 - - 21 26 29 1 - - - 20 2 26 40 212 0.01 2 - - 24 28 29 0 - - - 21 2 24 - - - - 20 22 180 87 0.01 2 2 7 9 40 4-29 1 4 7 22 22 26 1 7 160 779 0.01 2 20 7 9 4-26 29 1 4 7-20 2 0 1 6 1100 19 0.01 2-2 28 1 8 - - 21 2 29 - - 21 24 2 1 82 89 0.01 2 - - 2 29 6 - - - 2 26 0 - - - 21 2 28 0 260 0.01 2 - - 2 26 29 1 - - - 20 2 2 - - - - - 22 200 1180 0.01 2 22 8 9 40 41 44-1 6 8 29 28 1 4 40 2000 944 0.01 2-4 4 7 8 41-28 28 1 6 22 2 29 1 7 1600 7 0.01 2-29 1 4 6 9-2 2 28 0 4-20 2 28 0 1200 66 0.01 2-21 2 29 6 - - - 2 26 0 - - 20 24 28 1 800 78 0.01 2 - - 20 24 26 29 - - - - 20 2 - - - 20 21 24 12 147 0.01 2 2 6 9 41 4 4-1 4 6 8 40 29 28 1 6 9 4 2700 1274 0.01 2 20 6 8 40 4-28 1 8 24 2 0 4 7 40 2100 991 0.01 2-29 1 4 6 9-24 26 29 1-21 26 1 4 7 10 71 0.01 2-20 26 0 4 7 - - 21 2 29 - - 24 28 0 4 100 49 0.01 2 - - 24 26 29 1 - - - 21 24 26 - - - 24 26 28 72 178 0.08 20 26 40 41 4 4 2 1 6 8 9 41 0 0 7 40 44 00 162 0.07 18 24 4 8 40 41 44 20 0 4 6 8 40 28 0 6 9 4 2800 121 0.0 12 20 1 6 8 40-28 1 4 6 2 24 29 4 6 40 2100 991 0.0 12-2 28 0 6 - - 24 26 29 - - 26 0 4 6 1400 661 0.01 2 - - 21 2 28 0 - - - 21 24 26 - - 21 26 29 1 80 91 0.44 110 49 49 49 2 48 48 48 0 2 2 44 44 49 1 4 7 7000 0 0.1 78 4 4 4 48 49 0 44 44 44 46 48 49 40 41 47 49 1 6000 281 0.2 7 40 41 4 4 46 48 9 40 41 44 4 46 6 9 4 47 49 0 22 0.18 4 8 40 4 4 46 4 6 9 41 44 4 2 8 44 46 48 1 4000 1888 0.10 2 2 1 8 40 4 24 0 4 6 9 41 24 9 4 4 47 000 1416 0.06 14-24 29 8-2 28 1 4 7 20 1 6 8 40 44 Performance Notes: 1. NC Levels are calculated based on procedures as outlined on page 72. 2. Dash (-) in space indicates a NC less than 20. 2.0" w.g. (00 Pa).0" w.g. (70 Pa). sterisk ( * ) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow.

000 SERIES Performance Data Discharge Sound Power Levels 000 Series Basic Unit Fiberglass Liner Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." wg (12Pa) Ps 1.0" wg (20Pa) Ps 1." wg (7Pa) Ps 2.0" wg (00Pa) Ps.0" wg (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 22 106 0. 1 6 60 8 60 2 47 * * * * * * 70 69 6 61 2 49 72 71 67 62 4 1 7 72 68 64 7 4 74 74 70 66 60 7 200 94 0.4 106 64 8 6 8 49 46 67 6 6 61 0 46 69 68 64 60 1 48 72 71 66 62 4 1 7 72 67 6 6 4 7 7 70 67 9 7 10 71 0.24 61 61 0 0 40 7 6 62 1 42 9 68 66 60 6 48 4 69 68 62 8 1 48 68 69 6 60 0 69 69 68 67 8 4 100 47 0.11 28 9 44 4 29 - - 6 6 0 46 7 2 64 62 7 2 4 41 64 62 61 7 49 44 64 62 62 6 48 64 62 6 66 8 4 7 0.06 16 7 4 29 - - 61 4 48 44 29 6 8 7 44 8 61 8 9 9 0 44 60 8 60 62 48 60 6 60 61 6 400 189 0 48 62 9 6 61 48 67 66 6 64 4 49 71 70 70 67 6 1 7 72 72 69 8 7 74 7 70 9 76 76 7 71 62 8 00 142 0.11 28 61 6 1 46 41 67 66 62 60 49 44 70 71 6 6 2 48 7 72 67 64 4 1 74 74 69 66 6 7 76 71 68 9 7 20 118 0.08 20 9 2 47 49 40 4 6 6 7 44 40 69 69 61 8 48 4 71 72 6 61 1 48 72 7 6 6 4 1 7 74 68 66 8 200 94 0.0 1 8 48 42 42 2 26 6 6 0 40 6 68 66 7 4 42 69 69 60 8 49 46 70 70 6 60 2 0 71 71 66 6 6 4 12 9 0.02 7 44 1 27 - - 6 4 47 44 4 0 64 60 4 0 41 8 6 62 9 46 42 6 62 61 62 0 46 64 62 6 67 9 0 260 0.08 19 61 60 4 60 0 4 68 67 62 64 2 47 7 72 67 66 4 0 7 7 69 68 6 77 77 72 71 9 78 80 7 7 62 9 40 212 0.06 14 60 6 0 4 8 68 68 9 60 48 4 7 72 64 6 1 48 7 7 68 66 4 1 76 78 70 69 7 78 80 7 71 60 7 400 189 0.0 12 9 47 2 41 67 68 8 8 46 41 72 72 6 62 0 47 74 7 66 64 0 7 78 69 67 6 2 78 80 72 69 60 6 200 94 0.02 4 42 2 1 20-66 8 49 48 6 1 70 62 4 8 72 66 9 6 47 4 7 67 61 8 0 46 72 69 6 64 4 0 100 47 0.01 2 6 9 - - - - 9 0 4 9 28 24 60 6 2 46 7 61 8 7 44 9 61 9 8 60 49 44 60 9 60 64 6 2 800 78 0.17 44 69 67 69 66 6 1 72 70 6 61 4 0 76 7 68 6 7 4 81 76 72 69 61 8 8 79 74 71 64 60 8 8 78 74 68 6 60 07 0.12 29 66 64 6 60 1 46 70 66 60 7 1 48 74 71 66 6 6 78 74 70 67 60 7 80 77 72 69 6 60 82 81 76 72 67 64 0 260 0.08 21 6 61 8 46 9 69 6 8 49 44 7 69 6 61 0 78 7 68 6 9 79 76 70 67 61 7 80 78 74 69 6 61 18 0.0 8 7 49 4 40 0 22 6 8 4 1 44 8 71 6 9 7 1 46 72 68 6 9 4 0 7 69 66 61 6 2 7 70 69 6 9 22 106 0.01 2 41 2 28 - - 6 0 47 40 6 61 6 2 46 41 66 6 61 6 0 4 66 6 6 9 48 66 6 64 62 6 1100 19 0.0 6 68 66 70 68 9 2 7 70 72 70 9 2 78 7 72 69 9 81 76 74 71 62 8 78 76 7 64 8 86 8 79 76 68 6 900 42 0.02 66 6 64 61 2 46 71 68 66 6 47 77 71 68 6 6 1 79 74 71 68 9 82 77 7 70 62 8 8 81 76 7 66 62 700 0 0.01 2 6 60 7 46 40 70 66 61 8 0 4 7 70 6 62 4 1 79 7 68 6 8 4 81 76 71 68 61 8 8 80 7 71 64 61 600 28 0.01 2 60 6 1 41 4 68 6 8 47 4 74 68 6 60 49 78 7 67 6 6 80 7 69 66 9 6 81 78 7 69 6 60 400 189 0.01 2 6 47 42 8 27 20 6 9 0 42 8 71 66 9 49 4 74 69 6 9 49 74 71 66 61 2 7 7 69 6 9 6 1400 661 0.01 2 66 6 68 66 9 74 70 71 69 60 4 77 7 72 70 62 6 80 7 74 71 64 9 82 78 76 7 66 61 8 81 79 76 69 6 120 90 0.01 2 6 61 64 62 49 72 69 68 66 7 1 76 72 70 67 60 4 79 7 72 69 62 7 81 77 74 71 64 9 8 81 77 7 68 6 900 42 0.01 2 62 4 4 9 69 6 60 8 49 74 69 64 62 78 7 68 6 9 6 80 76 70 68 61 8 82 80 74 71 66 6 67 19 0.01 2 8 48 46 44 6 28 66 60 48 4 7 67 62 9 49 76 72 6 6 7 4 78 74 68 6 60 6 78 76 72 68 6 60 40 212 0.01 2 41 6 2 2 20 64 7 2 48 42 8 70 64 8 49 4 71 68 62 8 49 71 69 6 60 6 2 71 70 68 6 9 7 180 87 0.01 2 68 6 69 67 60 4 78 7 7 72 64 7 80 77 7 74 6 8 82 79 77 76 67 61 84 80 78 77 69 6 86 82 80 79 72 67 160 779 0.01 2 66 6 66 64 7 1 76 7 71 70 61 4 78 7 7 71 6 7 81 77 7 7 6 9 8 79 77 7 67 62 8 82 78 77 70 66 1100 19 0.01 2 67 9 4 2 44 8 72 67 62 60 4 49 7 69 66 64 7 4 77 72 68 66 9 6 79 7 70 69 62 8 82 78 74 71 66 62 82 89 0.01 2 9 1 46 4 26 67 62 7 49 44 72 67 62 60 49 7 70 6 6 6 76 7 67 6 9 78 76 71 68 6 9 0 260 0.01 2 42 1 21-6 7 2 49 42 7 69 64 8 49 44 71 67 61 8 2 48 71 69 64 60 1 7 71 67 64 9 6 200 1180 0.01 2 69 64 69 67 61 8 7 7 72 64 8 84 78 7 74 6 60 84 80 78 76 68 62 86 81 79 78 70 64 87 8 81 80 74 68 2000 944 0.01 2 68 61 62 61 4 48 80 72 68 67 9 4 80 74 72 70 62 8 81 77 74 72 6 60 8 78 76 7 67 6 8 81 78 78 72 67 1600 7 0.01 2 6 7 48 41 76 69 64 6 6 1 77 72 68 66 9 8 79 74 71 70 6 9 81 76 72 72 66 61 82 79 7 7 69 6 1200 66 0.01 2 8 49 47 46 9 2 69 64 9 8 4 49 7 67 64 6 7 4 7 70 67 66 60 6 78 7 69 68 62 8 79 76 72 70 66 62 800 78 0.01 2 46 8 2-62 6 1 4 40 68 6 9 6 0 46 71 66 62 9 4 0 72 68 64 62 7 7 70 68 6 61 7 12 147 0.01 2 71 64 69 67 61 82 72 74 7 64 8 84 76 76 7 67 60 86 78 78 77 69 6 87 80 79 78 71 6 89 82 82 82 76 69 2700 1274 0.01 2 69 62 64 6 7 0 79 71 70 69 61 6 82 74 7 72 6 9 8 77 76 7 68 61 8 79 78 77 70 64 87 82 81 81 7 69 2100 991 0.01 2 64 6 7 49 42 76 67 6 64 8 78 72 70 69 62 7 80 74 7 72 6 60 81 76 7 7 69 6 84 79 78 78 72 67 10 71 0.01 2 7 49 49 46 9 1 69 6 61 60 0 7 68 66 6 9 4 77 71 70 69 6 7 79 74 72 71 6 60 82 77 7 7 69 64 100 49 0.01 2 4 8 4 26 20 6 9 6 48 42 72 6 6 62 0 74 68 6 64 9 4 76 70 67 6 61 6 77 72 70 68 64 60 72 178 0.08 20 7 68 69 68 62 6 81 74 74 7 66 9 8 76 76 74 67 61 86 78 78 7 68 6 87 80 78 76 69 6 89 82 80 78 72 68 00 162 0.07 18 72 6 66 66 61 4 80 72 72 71 64 7 8 7 7 7 6 60 8 78 76 74 67 62 86 79 77 7 68 6 88 82 79 77 71 66 2800 121 0.0 12 69 61 60 9 4 47 78 69 67 66 9 81 7 70 67 61 8 82 7 72 69 6 9 8 77 74 71 6 61 8 79 76 74 69 6 2100 991 0.0 12 61 2 1 4 6 70 6 61 60 0 7 69 6 62 8 8 77 71 68 6 60 9 79 7 69 67 62 9 80 76 7 70 66 6 1400 661 0.01 2 4 44 40 8 0 20 6 9 4 46 69 64 60 7 49 72 67 6 60 6 7 69 6 62 8 7 71 69 66 62 9 80 91 0.44 110 92 8 84 80 77 7 92 8 84 81 77 74 92 86 8 82 78 7 94 88 86 8 79 76 9 89 88 8 79 76 9 89 86 84 81 77 7000 0 0.1 78 89 81 79 7 72 68 89 82 80 77 7 70 89 8 82 79 7 72 91 8 8 80 76 7 92 86 8 82 77 74 9 87 8 82 79 76 6000 281 0.2 7 8 77 74 72 68 64 86 79 77 74 70 67 87 81 79 76 72 69 89 8 81 78 74 71 90 8 8 80 7 72 91 86 84 81 78 7 0 22 0.18 4 81 7 71 68 6 61 8 76 74 71 68 64 8 79 77 74 70 67 87 81 79 76 72 69 89 8 81 78 74 71 90 84 82 79 77 74 4000 1888 0.10 2 7 6 6 60 6 78 71 68 6 61 8 81 74 71 68 6 62 8 77 7 72 68 6 8 79 76 7 70 68 86 82 80 77 7 72 000 1416 0.06 14 64 6 2 48 4 72 6 62 9 1 76 70 66 6 60 7 78 7 70 67 64 61 81 7 72 69 67 6 8 78 77 74 72 70 For performance table notes, see page 20; highlighted numbers indicate embedded RI certification points. 17

000 SERIES Performance Data Discharge Sound Power Levels 000 Series ith ft. (914) Integral ttenuator Fiberglass Liner Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." wg (12Pa) Ps 1.0" wg (20Pa) Ps 1." wg (7Pa) Ps 2.0" wg (00Pa) Ps.0" wg (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 22 106 0. 1 9 2 0 49 4 2 * * * * * * 64 61 7 0 4 27 66 6 9 1 6 29 67 64 60 9 2 68 66 62 42 200 94 0.4 106 8 0 48 47 1 24 61 7 0 2 24 6 60 6 49 26 66 6 8 1 6 29 67 64 9 2 8 2 67 6 62 6 41 10 71 0.24 61 4 42 9 22-9 4 47 40 24-62 8 2 4 0 2 6 60 4 47 26 62 61 7 49 28 6 61 60 6 40 2 100 47 0.11 28 6 26 - - - 7 48 42 - - 8 4 49 41 27-8 4 46 1 22 8 4 4 2 26 8 4 40 2 7 0.06 16 1 2 - - - 46 40 - - 7 0 49 42 26-0 1 48 2 22 4 0 2 1 26 4 48 2 0 8 1 400 189 0 48 6 1 48 0 26 61 8 7 6 27 6 62 62 6 8 29 67 64 64 8 40 1 69 66 6 9 41 70 68 67 60 44 6 00 142 0.11 28 48 4 44 28-61 8 4 49 1 22 64 6 7 2 4 26 67 64 9 6 29 68 66 61 8 1 69 68 6 7 41 20 118 0.08 20 44 9 8 22-9 7 49 44 26-6 61 47 0 2 6 64 0 26 66 6 7 2 6 29 67 66 60 40 200 94 0.0 1 2 40 4 1 - - 9 4 9 22-62 8 49 44 27-6 61 2 47 1 24 64 62 49 4 28 6 6 8 4 8 2 12 9 0.02 1 6 2 - - - 7 46 9 - - 8 2 46 9 2-9 4 1 44 28-9 4 1 2 24 8 4 6 41 1 0 260 0.08 19 2 46 49 2 2 62 9 4 4 2 67 64 9 6 28 69 67 61 7 8 1 71 69 64 60 41 72 72 67 62 44 7 40 212 0.06 14 4 48 42 44 27-62 60 1 49 0 21 67 64 6 2 26 69 67 60 6 29 70 70 62 8 9 1 72 72 6 60 42 400 189 0.0 12 4 9 41 2-61 60 0 47 28-66 64 1 2 2 68 67 8 28 69 70 61 6 8 0 72 72 64 8 42 4 200 94 0.02 4 49 4 24 - - - 60 0 41 7 - - 64 4 47 42 2-66 8 1 4 29 21 67 9 47 2 24 66 61 7 6 28 100 47 0.01 2 0 1 - - - - 42 28 - - 4 48 44 - - 0 49 44 26-1 0 49 1 22 4 1 2 8 0 800 78 0.17 44 6 60 6 7 40 66 6 61 2 8 2 70 66 64 6 41 6 7 69 68 60 4 40 77 72 70 62 48 42 79 76 74 6 2 47 60 07 0.12 29 60 7 9 1 28 64 9 6 48 0 68 64 62 4 40 72 67 66 8 44 9 74 70 68 60 47 42 76 74 72 6 1 46 0 260 0.08 21 9 4 4 46 0 21 6 6 4 46 26 69 62 61 2 9 2 72 66 64 6 4 7 7 69 66 8 4 9 74 71 70 60 49 4 18 0.0 8 1 41 29 12 0 9 0 46 40 26-6 7 1 46 24 66 60 48 6 28 67 61 8 0 8 0 67 62 61 4 41 22 106 0.01 2 49 4 28 19 - - 7 48 46 8 24-9 4 2 4 0 2 60 6 7 47 4 27 60 6 9 0 7 0 60 6 60 40 1100 19 0.0 6 62 9 66 9 4 4 67 6 68 61 4 4 72 66 68 60 4 7 69 70 62 46 7 77 71 72 64 48 40 80 76 7 67 2 4 900 42 0.02 60 6 60 2 6 28 6 61 62 4 7 29 71 64 64 6 40 7 67 67 9 4 7 76 70 69 61 46 40 79 74 72 64 0 44 700 0 0.01 2 7 46 0 22 64 9 7 49 4 27 69 6 61 8 7 66 64 6 42 6 7 69 67 9 4 40 77 7 71 62 48 4 600 28 0.01 2 4 49 49 42 2-62 6 4 46 1 2 68 61 9 1 7 1 72 66 6 4 40 74 68 6 7 4 8 7 71 69 60 47 42 400 189 0.01 2 0 40 8 29 - - 9 2 49 41 26-6 9 46 27 68 62 9 0 7 1 68 64 62 2 9 4 69 66 6 6 4 8 1400 661 0.01 2 61 8 6 9 47 9 69 6 68 62 48 40 72 68 69 6 0 42 7 70 71 64 2 4 77 7 7 66 4 47 80 76 76 69 7 1 120 90 0.01 2 60 6 61 4 67 64 6 9 4 7 71 67 67 60 48 40 74 70 69 62 0 4 76 72 71 64 2 4 80 76 74 68 6 49 900 42 0.01 2 7 0 1 46 2 64 60 7 1 41 69 64 61 4 9 7 68 6 8 47 42 7 71 67 61 49 44 77 7 71 64 4 49 67 19 0.01 2 4 4 7 24-61 2 46 6 29 68 62 9 2 41 71 67 62 6 4 40 7 69 6 8 48 42 7 71 69 61 1 46 40 212 0.01 2 0 6 2 - - 9 2 49 41 0 24 6 9 48 7 1 66 6 9 1 41 66 64 62 44 8 66 6 6 8 47 4 180 87 0.01 2 6 60 66 60 48 40 7 70 70 6 2 4 7 72 72 67 44 77 74 74 69 47 79 7 7 70 7 49 81 77 77 72 60 160 779 0.01 2 61 8 6 7 4 7 71 68 68 6 49 40 7 70 70 64 1 4 76 72 72 66 4 78 74 74 68 48 80 77 7 70 8 2 1100 19 0.01 2 62 4 1 4 2 24 67 62 9 42 70 64 6 7 4 40 72 67 6 9 47 42 74 70 67 62 0 44 77 7 71 64 4 48 82 89 0.01 2 44 44 9 27-64 9 6 1 42 68 62 61 6 4 40 70 6 64 9 48 42 7 68 66 61 0 44 74 71 69 6 4 48 0 260 0.01 2 0 7 2 24 - - 8 2 49 42 0 2 64 9 48 7 0 66 62 8 1 40 4 66 64 61 4 7 68 66 64 7 47 42 200 1180 0.01 2 64 9 66 60 49 41 78 70 70 6 2 44 79 7 72 67 46 79 7 7 69 6 48 81 76 76 71 8 0 82 78 78 7 62 4 2000 944 0.01 2 6 6 9 4 42 4 7 67 6 60 47 40 7 69 69 6 0 44 76 72 71 6 46 78 7 7 68 49 80 76 7 71 60 1600 7 0.01 2 60 2 2 48 6 27 71 64 61 6 44 7 72 67 6 9 47 44 74 69 68 6 1 4 76 71 69 6 4 47 77 74 72 68 7 1 1200 66 0.01 2 44 44 9 27-64 9 6 1 42 68 62 61 6 4 40 70 6 64 9 48 42 7 68 66 61 0 44 74 71 69 6 4 48 800 78 0.01 2 0 41 26 - - 7 1 0 44 26 6 8 6 49 8 2 66 61 9 2 42 6 67 6 61 4 9 68 6 6 8 49 4 12 147 0.01 2 67 60 64 8 1 4 78 68 69 64 4 48 80 72 71 66 7 0 82 74 7 68 9 8 76 74 69 61 8 78 77 7 66 9 2700 1274 0.01 2 6 8 9 4 47 40 7 67 6 60 1 46 78 70 68 6 49 79 7 71 66 8 1 81 7 7 68 60 4 8 78 76 72 6 9 2100 991 0.01 2 60 2 2 46 9 2 72 6 60 48 4 74 68 6 60 2 47 76 70 68 6 0 77 72 70 66 9 80 7 7 69 62 7 10 71 0.01 2 4 44 7 29 21 6 9 6 1 4 40 69 64 61 6 49 44 7 67 6 60 47 7 70 67 62 0 78 7 70 64 9 4 100 49 0.01 2 1 9 2 - - 61 1 46 8 2 68 61 8 4 40 70 64 60 49 44 72 66 62 6 1 46 7 68 6 9 4 0 72 178 0.08 20 70 6 6 9 47 78 71 70 64 7 0 82 7 72 6 8 2 8 7 74 66 9 4 84 77 74 67 60 6 86 79 76 69 6 9 00 162 0.07 18 69 62 62 7 2 4 77 69 68 62 48 80 72 71 64 6 1 82 7 72 6 8 8 76 7 66 9 4 8 79 7 68 62 7 2800 121 0.0 12 66 8 6 0 4 8 7 66 6 7 0 44 78 70 66 8 2 49 79 72 68 60 4 0 80 74 70 62 6 2 82 76 72 6 60 6 2100 991 0.0 12 8 0 48 42 6 27 67 62 7 1 46 41 72 66 61 49 49 74 68 64 6 1 0 76 70 6 8 0 77 7 69 61 7 4 1400 661 0.01 2 1 41 6 29 21-62 6 1 4 44 7 66 61 6 48 44 40 69 64 9 1 47 44 70 66 61 49 46 72 68 6 7 0 80 91 0.44 110 91 84 81 72 71 68 91 84 81 7 71 69 91 8 82 74 72 70 9 87 8 7 7 71 94 88 8 77 7 71 94 88 8 76 7 72 7000 0 0.1 78 88 80 76 67 66 6 88 81 77 69 67 6 88 82 79 71 69 67 90 84 80 72 70 68 91 8 82 74 71 69 92 86 82 74 7 71 6000 281 0.2 7 84 76 71 64 62 9 8 78 74 66 64 62 86 80 76 68 66 64 88 82 78 70 68 66 89 84 80 72 69 67 90 8 81 7 72 70 0 22 0.18 4 80 72 68 60 9 6 82 7 71 6 62 9 84 78 74 66 64 62 86 80 76 68 66 64 88 82 78 70 68 66 89 8 79 71 71 69 4000 1888 0.10 2 72 64 60 2 0 48 77 70 6 7 80 7 68 60 9 7 82 76 72 64 62 60 84 78 7 6 64 6 8 81 77 69 69 67 000 1416 0.06 14 6 2 44 42 40 71 64 9 1 49 46 7 69 6 4 2 77 72 67 9 8 6 80 74 69 61 61 60 82 77 74 66 66 6 For full performance table notes, see page 20. 18

000 SERIES Performance Data Radiated Sound Power Levels 000 Series Basic Unit Fiberglass Liner Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." wg (12Pa) Ps 1.0" wg (20Pa) Ps 1." wg (7Pa) Ps 2.0" wg (00Pa) Ps.0" wg (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 22 106 0. 1-7 - - * * * * * * 1 48 4 8 2 0 4 49 42 2 1 44 6 7 4 48 9 8 200 94 0.4 106-6 2 - - - 9 7 8 29 29 49 46 4 7 0 29 2 47 40 2 1 0 42 4 47 7 7 10 71 0.24 61-29 1 - - - 40 6 0 2 2 47 46 40 4 28 26 49 0 47 9 1 0 47 48 48 4 4 2 48 48 48 0 40 7 100 47 0.11 28 - - - - - - - 7 2 27 - - - 4 42 4 27 2-44 4 41 2 29-4 46 46 6 2-42 44 1 4 8 7 0.06 16 - - - - - - - 7 1 26 - - - 41 4 7 29 24-42 4 42 2 29-8 42 4 40-6 41 48 44 40 400 189 0 48 49 41 4 6 4 27 2 4 40 40 9 6 6 48 4 8 7 4 60 2 49 40 9 4 6 6 1 42 40 6 6 9 6 4 44 40 00 142 0.11 28 47 8 2 2 0 27 0 4 7 1 4 46 44 7 1 7 49 47 9 8 9 2 49 40 9 9 4 4 9 20 118 0.08 20-1 2 2-0 40 6 2 0 2 4 4 42 2 28 48 4 0 6 1 48 7 7 2 7 1 42 41 200 94 0.0 1 - - - - - - 0 8 4 27 2-2 4 9 1 0 2 2 4 4 2 2 28 48 46 6 6 0 48 48 44 41 4 12 9 0.02 - - - - - - - 29 21 - - 48 40 8 28 27-48 42 42 4 27 49 42 44 9 8 29 49 42 44 47 46 7 0 260 0.08 19 48 47 41 9 1 29 49 48 42 41 1 7 2 46 41 2 62 49 4 6 4 64 8 1 4 40 8 67 61 6 48 44 4 40 212 0.06 14 48 44 7 0 28 48 47 40 8 2 29 6 0 4 40 4 1 9 48 44 6 61 0 4 9 7 64 8 4 46 42 41 400 189 0.0 12-42 28 26 49 46 9 0 28 6 49 44 8 2 29 9 2 47 40 6 62 4 49 42 9 6 64 8 4 4 42 41 200 94 0.02 4 - - - - - - 47 6 0 24 - - 4 8 0 29 28 4 4 2 1 0 47 44 6 2 2 49 46 4 7 7 100 47 0.01 2 - - - - - - - 4 27 - - - - 8 29 24 4 9 40 7 1 28 47 9 40 42 7 2 46 40 40 46 44 8 800 78 0.17 44 0 47 1 7 6 6 0 48 4 7 7 2 48 40 4 2 6 8 46 8 68 62 6 49 40 8 70 66 61 4 4 42 60 07 0.12 29 49 4 46 8 1 0 49 48 4 7 1 29 4 0 47 40 4 2 60 4 0 44 7 64 8 4 48 40 8 67 6 8 1 44 4 0 260 0.08 21 48 4 41 27 2 48 44 40 2 28 26 49 4 8 2 0 61 4 49 4 6 64 8 2 4 8 6 6 61 7 0 42 40 18 0.0 8 - - 28 - - - 40 29 24-2 48 42 6 0 28 7 1 46 40 2 0 7 2 48 42 4 2 7 0 47 9 8 22 106 0.01 2 - - - - - - - 9 28 - - 0 4 40 4 28 2 2 47 4 8 1 29 1 47 4 41 1 2 48 4 42 6 1100 19 0.0 6 2 0 4 7 4 7 1 46 7 2 60 4 1 40 8 6 7 4 42 6 67 60 6 4 44 9 70 6 60 49 48 42 900 42 0.02 1 47 40 4 1 29 6 0 4 7 4 1 8 49 9 7 6 6 1 42 42 6 6 8 4 44 44 9 68 60 6 47 48 42 700 0 0.01 2 0 4 7 1 29 2 1 47 42 1 28 7 1 47 7 6 2 61 0 40 9 6 1 42 41 7 64 9 6 4 44 40 600 28 0.01 2-9 29 26-0 4 40 1 0 26 7 49 4 4 1 60 49 8 8 61 1 40 40 6 6 9 6 44 4 40 400 189 0.01 2-26 - - - 49 41 6 28 27 24 4 47 41 2 1 0 7 2 46 4 2 7 2 47 7 6 4 9 4 1 41 40 9 1400 661 0.01 2 1 46 46 44 7 2 47 46 41 8 7 49 42 7 64 8 47 41 7 66 6 7 0 4 40 69 67 61 4 47 44 120 90 0.01 2 1 46 4 42 1 46 46 41 7 4 6 2 48 42 6 4 6 7 2 46 40 7 6 62 6 0 4 40 68 6 60 46 44 900 42 0.01 2 48 40 9 6 0 29 0 4 42 7 2 0 6 0 4 40 60 4 49 44 9 6 6 8 2 47 41 8 64 61 6 0 44 42 67 19 0.01 2 47 7 1 29 22-49 41 6 1 28 2 48 42 7 2 0 8 2 46 41 60 6 0 44 8 6 60 7 2 47 41 9 40 212 0.01 2 - - 24 - - - 48 40 0 26 24 46 9 4 0 29 4 49 4 8 1 0 46 41 4 6 2 48 4 9 8 180 87 0.01 2 7 47 48 40 6 27 8 49 48 40 7 1 60 2 4 9 64 9 6 0 4 9 6 62 7 2 46 42 68 66 61 6 49 46 160 779 0.01 2 4 4 40 26 7 49 46 9 6 0 9 4 1 44 8 4 6 8 49 42 8 64 60 6 1 4 41 67 6 60 48 4 1100 19 0.01 2 1 7 0 2-46 42 1 27 0 47 41 1 60 4 0 4 9 6 61 6 1 47 42 9 64 61 1 4 4 82 89 0.01 2-29 2 - - 0 4 8 2 29 2 48 4 8 0 8 2 47 42 7 4 9 4 49 44 9 7 61 7 49 4 41 0 260 0.01 2 - - - - - - - 8 29 2-1 44 8 4 0 28 47 42 8 4 2 6 0 4 41 6 7 2 48 4 40 8 200 1180 0.01 2 7 4 0 42 6 60 7 46 41 8 6 61 4 0 42 9 66 6 7 4 41 67 64 9 48 44 70 69 6 9 2 0 2000 944 0.01 2 4 0 48 44 7 8 1 46 9 61 9 49 42 7 64 61 6 2 4 41 6 62 8 48 44 68 66 61 8 1 49 1600 7 0.01 2 2 4 41 6 0 27 6 2 4 40 4 0 9 6 49 46 8 61 8 49 42 9 62 60 1 44 42 6 64 8 48 46 1200 66 0.01 2 47 9 29 24-2 48 40 6 0 27 2 4 41 4 2 8 49 4 8 6 60 8 1 48 41 9 61 61 2 4 44 800 78 0.01 2 - - - - - - 0 41 4 0 26-2 48 41 7 1 0 2 4 42 4 47 44 7 6 6 0 48 42 42 12 147 0.01 2 61 7 4 0 4 8 62 8 49 4 8 64 61 0 47 40 67 6 9 2 49 46 67 68 61 4 2 49 71 71 6 8 4 2 2700 1274 0.01 2 7 0 46 42 8 6 49 44 40 62 60 48 4 9 64 6 6 0 47 44 6 66 9 2 49 47 69 69 6 7 2 0 2100 991 0.01 2 4 48 44 9 0 6 46 41 7 1 60 7 0 44 41 8 6 61 48 44 4 64 6 7 0 46 4 66 66 60 0 48 10 71 0.01 2 46 40 0 26-1 48 42 1 27 7 48 40 6 60 8 2 4 40 9 60 60 47 4 41 62 6 7 2 47 4 100 49 0.01 2-2 24 - - - 49 46 8 1 28 24 2 1 4 7 1 4 47 41 7 7 0 4 40 8 6 8 2 48 4 42 72 178 0.08 20 8 8 1 4 8 61 60 1 46 9 64 62 7 48 9 67 66 60 6 0 4 69 69 62 7 1 49 71 72 6 9 49 00 162 0.07 18 7 7 49 4 6 60 60 0 4 8 6 62 7 2 46 7 66 6 9 4 48 4 68 68 61 6 0 48 71 71 64 9 48 2800 121 0.0 12 4 1 49 4 7 2 9 0 44 8 2 62 9 47 41 6 6 7 0 44 9 66 6 9 2 46 41 68 69 62 6 0 46 2100 991 0.0 12 49 44 41 4 28-4 0 44 7 4 28 9 7 0 42 7 2 61 60 4 40 6 6 6 6 49 4 9 64 6 8 47 44 1400 661 0.01 2-4 1 - - - 0 47 9 2 29 26 4 46 8 1 6 7 49 42 8 4 7 9 1 4 40 8 8 61 4 49 44 42 80 91 0.44 110 70 67 68 61 60 74 71 68 62 61 78 7 7 67 64 8 80 77 7 70 66 60 82 78 77 72 67 61 84 81 80 7 70 6 7000 0 0.1 78 67 64 6 9 7 71 68 66 60 8 7 72 71 6 62 6 77 74 7 68 64 8 79 76 7 70 6 9 81 78 78 7 68 61 6000 281 0.2 7 64 60 61 1 69 66 64 8 6 1 72 70 69 6 60 4 74 72 71 66 62 6 76 7 7 69 6 7 78 76 76 72 66 9 0 22 0.18 4 6 7 7 2 2 47 67 64 6 7 4 49 70 68 68 62 8 72 70 70 6 60 74 72 72 68 62 6 76 74 7 71 64 8 4000 1888 0.10 2 61 2 0 46 4 40 62 60 60 4 0 4 66 64 64 9 4 49 68 66 67 62 6 1 69 68 69 64 8 2 72 70 71 67 60 4 000 1416 0.06 14 6 48 46 4 9 7 7 6 6 1 46 42 61 60 61 6 0 4 6 62 6 9 2 47 6 64 6 61 4 48 67 66 68 64 6 0 For performance table notes, see page 20; highlighted numbers indicate embedded RI certification points. 19

000 SERIES Performance Data RI Certification and Performance Notes 000 Series Basic Unit RI Certification Rating Points Fiberglass Liner Min. Inlet Discharge Sound Power Levels @ 1." w.g. (7 Pa) Ps Radiated Sound Power Levels @ 1." w.g. (7 Pa) Ps Inlet irflow Ps Octave Band Octave Band cfm I/s "w.g. Pa 2 4 6 7 2 4 6 7 4 10 71 0.24 61 69 68 62 8 1 48 49 0 47 9 1 0 20 118 0.08 20 71 72 6 61 1 48 48 4 0 6 400 189 0.0 12 74 7 66 64 0 9 2 47 40 6 7 0 260 0.08 21 78 7 68 6 9 61 4 49 4 6 8 700 0 0.01 2 79 7 68 6 8 4 61 0 40 9 9 900 42 0.01 2 78 7 68 6 9 6 60 4 49 44 9 6 10 1100 19 0.01 2 77 72 68 66 9 6 60 4 0 4 9 6 12 1600 7 0.01 2 79 74 71 70 6 9 61 8 49 42 9 14 2100 991 0.01 2 80 74 7 72 6 60 6 61 48 44 4 16 2800 121 0.0 12 82 7 72 69 6 9 6 6 7 0 44 9 24 x 16 0 22 0.18 4 87 81 79 76 72 69 72 70 70 6 60 Performance Notes for Sound Power Levels: 1. Discharge sound power is the noise emitted from the unit discharge into the downstream duct. Discharge Sound Power Levels (SL) now include duct end reflection energy as part of the standard rating. Including the duct end correction provides sound power levels that would normally be transmitted into an acoustically, non-reflective duct. The effect of including the energy correction to the discharge SL, is higher sound power levels when compared to previous RI certified data. For more information on duct end reflection calculations see RI Standard 880. 2. Radiated sound power is the breakout noise transmitted through the unit casing walls.. Sound power levels are in decibels, db re 10-12 watts. Ratings are certified in accordance with RI Standards. 4. ll sound data listed by octave bands is raw data without any corrections for room absorption or duct attenuation. Dash (-) in space indicates sound power level is less than 20 db or equal to background.. Minimum inlet Ps is the minimum operating pressure requirement of the unit (damper full open) and the difference in static pressure from inlet to discharge of the unit. 6. sterisk (*) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow. 7. Data derived from independent tests conducted in accordance with NSI/SRE Standard 10 and RI Standard 880. 20

000Q SERIES 000Q SERIES QUIET TYPE IT DISSIPTIVE SILENCER PRODUCT OVERVIE Nailor 000Q Series Quiet Terminal units control the flow of conditioned primary air into a constant or variable air volume (VV) VC system at exceptionally quiet levels. There are three versions of the 000Q series: the standard cooling unit (001Q), a cooling with water reheat unit (0RQ) and a cooling unit with electric reheat (0REQ). Each unit includes a VV terminal and factory installed dissipative silencer providing an assembly ideal for use in sound sensitive environments like libraries, performance halls, classrooms, conference rooms, studios and hospitals. The 000Q Series shares design features with the 000 Series terminal units like the opposed blade damper (OBD), rectangular discharge, multi-point averaging Diamond Flow Sensor and various control options. The VV and silencer assembly is designed to provide minimal impact on system pressure drop while concurrently delivering superior sound attenuation. Each dissipative silencer is constructed with internal baffle (an acoustic absorption media) and is internally insulated. The baffles are made of perforated steel and are designed with elliptical nose pieces to transition air into and out of the silencer. rranged inside the silencer as side pods, the baffles act to attenuate discharge sound using an acoustical media placed between the silencer casing and the baffle. Internal (top and bottom) panels exposed to the airstream are insulated with fiberglass and as a result, field installed externally wrapped insulation is not needed. Of the three available types of media, the standard is a simple fiberglass fill which provides exceptional attenuation. hen IQ is a concern, the fiberglass can be wrapped in a woven fiberglass cloth to prevent erosion and entrainment of fibers into the airstream. Since the fiberglass cloth is porous moisture can penetrate the underlying fiberglass. There is also an option that wraps the fiberglass with Mylar, designed primarily for environments where fiberglass isolation is paramount. In the past, selecting a silencer to mate with a VV terminal involved multiple calculations, guesswork and an intimate knowledge of silencer performance. The engineer or contractor had to contend with pressure classes, sizes and free area to balance the associated pressure drop, attenuation and self generated noise against the VV terminal performance. Even after careful selection, the result was still a guess due to the unknown system effect created by the close coupled terminal/silencer assembly. Since each 000Q Series unit is designed, manufactured and tested as a complete assembly, the guesswork is eliminated. 001Q Cooling or eating only 0RQ Cooling with ot ater Reheat 0REQ Cooling with Electric Reheat 21

000Q SERIES SINGLE DUCT VRIBLE OR CONSTNT IR VOLUME 000Q SERIES QUIET DISSIPTIVE SILENCER Models: 001Q Cooling or eating only 0RQ Cooling with ot ater Reheat 0REQ Cooling with Electric Reheat Inclined opposed blade damper configuration minimizes noisy turbulence and provides smooth, accurate, near linear flow control. Model 001Q 000Q Series Quiet terminal units are used in noise sensitive applications such as libraries, studios, performance halls, classrooms, conference rooms and hospitals. The integral dissipative silencer minimizes pressure loss, reduces self-generated sound and maximizes acoustical attenuation, providing an extremely quiet terminal without the addition of downstream acoustic insulation. Model 000Q Series are available with electric or hot water reheat as well as options like removable flow sensors and access doors. Each unit is available with multiple insulation types, ranging from standard fiberglass to IQ types. STNDRD FETURES: Designed for noise sensitive applications such as classrooms, libraries, studios and performance halls. 22 ga. (0.86) galvanized steel casing, mechanically sealed, low leakage construction. 16 ga. (1.6) corrosion-resistant steel inclined opposed blade damper with extruded PVC seals (single blade on size 4,, 6). 4 rotation, C to close. Tight shut-off. Damper leakage is less than 2% of the terminal rated airflow at " w.g. (746 Pa). dia. plated steel drive shaft. n indicator mark on the end of the shaft shows damper position. Multi-point averaging Diamond Flow Sensor. luminum construction. Supplied with balancing tees. Rectangular discharge with slip and drive cleat duct connection. Full NEM 1 type controls enclosure for factory mounted controls. VV section is lined with /4" (19), dual density insulation, exposed edges coated to prevent air erosion. Meets the requirements of NFP 90 and UL 181. Right-hand controls location is standard (shown) when looking in direction of airflow. Optional left hand controls mounting is available. Unit is flippable. Caution: If unit has access door. vailable in 11 sizes ranging from 0 to 800 cfm (0-917 l/s) for 001Q and 0RQ units. 2-800 cfm (12-917 l/s) on 0REQ. Silencer Section: Designed to mate with VV section for optimum performance and ultra quiet operation. Optimized internal baffle geometry reduces self-generated noise, maximizes acoustic attenuation. 22 ga. (0.86) coated steel perforated baffles encapsulate fiberglass acoustic media. Internal insulation on top and bottom exposed panels optimizes sound reduction and eliminates need for external field applied thermal duct wrap. Options and ccessories: Bottom access door. Removable insert type Diamond Flow Sensor. 24 VC control transformer. Toggle disconnect switch. anger brackets. Controls enclosure for field or factory mounted controls. Dust tight enclosure seal. 20 ga. (1.00) construction. Multiple VV liners. IQ coustic liners available on dissipative silencer. 22

000Q SERIES Dimensions Model 001Q Quiet Dissipative Silencer nalog Electronic and Digital Controls full NEM 1 controls enclosure is provided for factory mounted controls. Optional for field mounted controls. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS IRFLO 11" (279) OPTIONL (FMI) REMOVBLE FLO SENSOR (140) 14" (6) DMPER DRIVESFT 1 (94) OPTIONL CCESS DOOR 1 (108) RECTNGULR DISSIPTIVE SILENCER Pneumatic Controls Universal pneumatic control mounting panel features double wall stand-off construction for strength and rigidity Controls mounting screws do not penetrate terminal casing. 6" (914) SLIP ND DRIVE CONNECTION 6" MULTI-POINT INLET: ROUND, VERGING FLT OVL OR FLO SENSOR RECTNGULR UNIVERSL PNEUMTIC CONTROL MOUNTING PNEL ND PROTECTIVE SROUD RECTNGULR DISSIPTIVE SILENCER SLIP ND DRIVE CONNECTION 6 (16) IRFLO DMPER DRIVESFT 6" OPTIONL (FMI) REMOVBLE FLO SENSOR (140) 14 (68) 1 (94) OPTIONL CCESS DOOR 1 (108) 6" (914) 6" Dimensional Data Unit Inlet 4 10 (24) 10 (24) 7/8 (98) Round 10 (24) 10 (24) 4 7/8 (124) Round 6 10 (24) 10 (24) 7/8 (149) Round 7 12 (0) 12 1/2 (18) 6 7/8 (17) Round 8 12 (0) 12 1/2 (18) 7 7/8 (200) Round 9 14 (6) 12 1/2 (18) 8 7/8 (22) Round 10 14 (6) 12 1/2 (18) 9 7/8 (21) Round 12 18 (47) 12 1/2 (18) 12 1/16 x 9 1/16 (29 x 249) Oval 14 24 (610) 12 1/2 (18) 16 1/16 x 9 1/16 (408 x 249) Oval 16 28 (711) 12 1/2 (18) 19 /16 x 9 1/16 (487 x 249) Oval 24 x 16 8 (96) 18 (47) 2 7/8 x 1 7/8 (606 x 40) Rect. 2

000Q SERIES Dimensions Model 0RQ Quiet Dissipative Silencer ot ater Reheat Coils One, two, three and four row available. ot water coils have copper tubes and aluminum ripple fins, 10 per inch. Coils have, 7/8" (22) or 1 /8" () O.D. sweat connections. Galvanized steel casing with slip and drive discharge duct connection. Optional low leakage gasketed access door is recommended for coil access and cleaning. RI Certified coils. Coil Performance data on pages 40-48. MULTI-POINT VERGING FLO SENSOR ROUND, FLT OVL OR RECTNGULR INLET 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS IRFLO 11" (279) OPTIONL FMI REMOVBLE FLO SENSOR (140) 14" (6) DMPER DRIVESFT 1 (94) 0REQ Integral Electric Reheat Electric coil is factory mounted in an integral extended plenum section. RECTNGULR DISSIPTIVE SILENCER 48" (1219) 6 (161) L OPTIONL CCESS DOOR SLIP ND DRIVE CONNECTION Right or left hand coil connection is determined by looking through the terminal inlet in the direction of airflow. Full details and selection guide on page 7. 6" MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 29" (77) RECTNGULR DISSIPTIVE SILENCER SLIP ND DRIVE CONNECTION 6" IRFLO 11 /4" (298) OPTIONL (FMI) REMOVBLE FLO SENSOR (140) PRIMRY IR VLVE CONTROLS ENCLOSURE OPTIONL CCESS DOOR ELECTRIC COIL CONTROLS ENCLOSURE (INGED CCESS DOOR) 1" (787) 79" (2007) 48" (1219) 6" Dimensional Data Unit Inlet Coil Connections 1 Row 2 Row & 4 Row L (1 & 2 Row) ot ater Coil L ( & 4 Row) 4 10 (24) 10 (24) 7/8 (98) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 (24) 10 (24) 4 7/8 (124) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 6 10 (24) 10 (24) 7/8 (149) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 7 12 (0) 12 1/2 (18) 6 7/8 (17) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 8 12 (0) 12 1/2 (18) 7 7/8 (200) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 9 14 (6) 12 1/2 (18) 8 7/8 (22) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 14 (6) 12 1/2 (18) 9 7/8 (21) Round 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 12 18 (47) 12 1/2 (18) 12 1/16 x 9 1/16 (29 x 249) Oval 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 14 24 (610) 12 1/2 (18) 16 1/16 x 9 1/16 (408 x 249) Oval 1/2 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 16 28 (711) 12 1/2 (18) 19 /16 x 9 1/16 (487 x 249) Oval 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 24 x 16 8 (96) 18 (47) 2 7/8 x 1 7/8 (606 x 40) Rect. 7/8 (22) 7/8 (22) 1 /8 () (127) 7 1/2 (191) 24

000Q SERIES Options: FMI Removable Flow Sensor Round or Flat Oval Inlet The (FMI) Removable Flow Sensor is a multipoint averaging airflow sensor. Designed to provide accurate sensing by sampling air velocities in four quadrants of a duct, the differential pressure flow sensor provides an averaged reading at an amplification of approximately 2. times the velocity pressure, dependent upon nominal size. GROMMET SUPPORT BRCKET GSKET /16" () DI. O.D. FLO DIRECTION LBEL SCRE INSERT TO DUCT T PERIMETER OLES SCRE ED IG PRESSURE CONNECTIONS FOR 1/4" (6) O.D. FR TUBING LO PRESSURE Features: Removable for cleaning. ll metal construction - no combustible materials in the air stream. mplifies velocity pressure approximately 2. times to give a wide range of useful output signal vs. flow. Compact size allows for easy removal in tight spaces. Sensor design minimizes pressure drop and regenerated noise. Label provided on each unit gives airflow direction. Multi-point sensing gives an accurate output signal with a maximum deviation of only ± % with a hard 90 degree elbow, provided a straight inlet condition with a minimum length of two equivalent duct diameters is provided. SUPPORT GROMMET BRCKET GSKET FLO DIRECTION LBEL ROUND OR FLT OVL INLET Rectangular Inlet /16" () DI. O.D. SCRE INSERT TO DUCT T PERIMETER OLES IRFLO DIRECTION IG PRESSURE RETNGULR INLET IRFLO DIRECTION CONNECTIONS FOR 1/4" (6) O.D. FR TUBING LO PRESSURE ccess Door Ultra-low leakage, premium quality and performance. Flat oval design. Die formed 24 ga. (0.7) galvanized steel flanged and door 1" (2) insulation with 24 ga. (0.7) galv. backing plate. panel. Leakage tested in conformance with British Standard Positive bulb door seal. D/142 Class C. Plated steel camlock fasteners. See 0800-1 submittal for more detailed information. Terminal Unit 4 12 14 24 x 16 Nominal Door 8" x " (20 x 127) 12" x 6" (0 x 12) Max. Leakage 8" w.g. (2 kpa) cfm 0.06 cfm (1.02 l/min.) 0.064 cfm (1.8 l/min.) 2

000Q SERIES Recommended irflow Ranges For Single Duct Terminal Units The recommended airflow ranges below are for 000Q Series single duct terminal units with pressure independent controls and are presented as ranges for total and controller specific minimum and maximum airflow. irflow ranges are based upon maintaining reasonable sound levels and controller limits using Nailor's Diamond Flow Sensor as the airflow measuring device. For a given unit size, the minimum, auxiliary minimum (where applicable) and the maximum flow setting must be within the range limits to ensure pressure independent operation, accuracy and repeatability. Minimum airflow limits are based upon.02" w.g. ( Pa) differential pressure signal from Diamond Flow Sensor on analog/ digital controls and.0" (7.) for pneumatic controllers. This is a realistic low limit for many transducers used in the digital controls industry. Check your controls supplier for minimum limits. Setting airflow minimums lower, may cause damper hunting and result in a failure to meet minimum ventilation requirements. Factory settings will therefore not be made outside these ranges; however, a minimum setting of zero (shut-off) is an available option on pneumatic units. here an auxiliary setting is specified, the value must be greater than the minimum setting. The high end of the tabulated Total irflow Range on pneumatic and analog electronic controls represents the Diamond Flow Sensor's differential pressure reading at 1" w.g. (20 Pa). The high end airflow range for digital controls is represented by the indicated transducer differential pressure. Model 001Q SRE 10 "Performance Rating of ir Terminals" is the method of test for the certification program. The "standard rating condition" (certification rating point) airflow volumes for each terminal unit size are tabulated below per RI Standard 880. These air volumes equate to an approximate inlet velocity of 2000 fpm (10.2 m/s). hen digital or other controls are mounted by Nailor, but supplied by others, these values are guidelines only, based upon experience with the majority of controls currently available. Controls supplied by others for factory mounting are configured and calibrated in the field. irflow settings on pneumatic and analog controls supplied by Nailor are factory preset when provided. Imperial Units, Cubic Feet per Minute 26 Unit Inlet Type Total irflow Range, cfm Metric Units, Liters per Second irflow at 2000 fpm Inlet Velocity (nom.), cfm Range of Minimum and Maximum Settings, cfm Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( "w.g.) Min. Max. Min. Max. Min. Max..0 1.0.02 1.0.02 1.0 1.2 1. 4 0 22 10 0 180 2 180 2 180 200 22 Round 0 400 20 2 4 2 4 2 60 400 6 0 0 400 80 40 6 40 6 40 00 0 7 0 800 0 11 60 9 60 9 60 72 800 8 0 1100 700 1 900 12 900 12 900 1000 1100 Round 9 0 1400 900 200 110 16 110 16 110 128 1400 10 0 1840 1100 260 100 21 100 21 100 167 1840 12 0 200 1600 200 290 200 290 200 200 200 14 Flat Oval 0 12 2100 440 20 60 20 60 20 280 12 16 0 72 2800 2 040 40 040 40 040 400 72 24 x 16 Rect. 0 80 0 1180 6800 960 6800 960 6800 7600 80 Unit Inlet Type Total irflow Range, l/s irflow at 10.2 m/s Inlet Velocity (nom.), l/s Range of Minimum and Maximum Settings, l/s Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( Pa ) Min. Max. Min. Max. Min. Max. 7. 249 249 249 11 74 4 0 106 71 14 8 12 8 12 8 94 106 Round 0 189 118 26 1 21 1 21 1 170 189 6 0 260 189 8 212 1 212 1 212 26 260 7 0 78 260 4 07 4 07 4 07 42 78 8 0 19 0 7 42 9 42 9 42 472 19 Round 9 0 661 42 94 4 78 4 78 4 606 661 10 0 868 19 12 708 101 708 101 708 790 868 12 0 1180 7 168 967 17 967 17 967 108 1180 14 Flat Oval 0 147 991 208 120 170 120 170 120 14 147 16 0 178 121 248 14 20 14 20 14 1604 178 24 x 16 Rect. 0 91 22 7 209 4 209 4 209 86 91

000Q SERIES Performance Data NC Level pplication Guide 000Q Series Quiet Dissipative Silencer Fiberglass coustic Media (FM) Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet NC Levels @ Inlet Pressure ( Ps) shown DISCRGE RDITED Ps cfm l/s "w.g. Pa Min. 0." 1.0" 1." 2.0".0" Min. 0." 1.0" 1." w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. Ps Ps (12 Pa) (20 Pa) (7 Pa) (00 Pa) (70 Pa) (12 Pa) (20 Pa) (7 Pa) Performance Notes: 1. NC Levels are calculated based on procedures as outlined on page 72. 2. Dash (-) in space indicates a NC less than 20. 2.0" w.g. (00 Pa).0" w.g. (70 Pa) 200 94 0.8 94-20 21 24 2 2 - - - 21 24 28 10 71 0.2 7 - - - - - 20 - - - 21 22 22 100 47 0.11 28 - - - - - - - - - - 20 2 0 24 0.02 - - - - - - - - - - - - 0 16 0.17 41 - - 2 2 26 28 - - - 2 2 0 20 118 0.08 21 - - 2 2 2 26 - - - - 22 2 10 71 0.0 7 - - - - - - - - - - - 20 100 47 0.01 2 - - - - - - - - - - - - 00 26 0.1 1 - - 2 26 28 1 - - 20 2 26 0 400 189 0.09 22 - - 20 24 26 29 - - - 21 2 29 00 142 0.06 14-21 2 29 0 - - - 20 21 2 200 94 0.0 7 - - 21 24 2 24 - - - - - 20 700 0 0.08 20-20 26 1 4 22-21 26 0 0 260 0.0 1 - - 28 1 4 - - - 24 28 2 400 189 0.0 7 - - 2 28 28 29 - - - 20 2 26 20 118 0.01 - - - - - - - - - - - 20 1100 19 0 48 20 24 1 4 6 9-20 2 29 1 900 42 0.14 4-21 29 4 8 - - 2 26 29 700 0 0.09 22 - - 2 0 - - 21 24 26 1 00 26 0.0 12 - - 2 29 0 - - - 21 2 26 1400 661 0.27 67 20 2 29 8 20 20 2 28 4 8 110 4 0 46-20 2 0 6 - - 21 2 1 900 42 0.12 29 - - 24 0 1 4 - - - 2 28 1 60 07 0.06 16 - - 2 29 0 1 - - - 20 2 26 100 708 0.2 62 20 24 29 4 9-20 24 28 0 1100 19 0.16 40 - - 24 29 0 - - 21 24 2 1 700 89 0.08 20 - - - 2 24 2 - - - 21 2 28 200 260 0.01 - - - - - - - - - - - 22 200 1180 0.4 108 20 2 1 6 6 9 29 28 1 4 40 200 967 0.1 77-21 0 1 4 6 22 2 29 1 8 1600 7 0.20 0-21 26 29 1-20 2 28 0 110 4 0.11 28 - - - 24 24 28 - - 20 24 26 0 260 121 0.29 7-20 28 0 24 2 0 4 7 40 2100 991 0 48 - - 2 28 29 1-21 26 1 4 7 10 71 0.11 28 - - - 2 2 29 - - 24 28 0 4 1000 472 0.0 1 - - - - 20 2 - - - 21 2 26 72 178 0. 12 2 * 1 6 41 0 * 7 40 44 2800 121 0.0 76 - - 24 26 29 2 24 29 4 6 40 1800 849 0.14 4 - - - 20 21 24 - - 24 29 1 800 991 0.0 8 - - - - - - - - 26 0 4 6 42 201 0.01 2 - - - - - - - - - - - - 8000 000 0.4 107 0 1 9 48 49 6 4 4 48 0 6 7000 0 0.1 78 27 29 6 4 46 49 40 41 47 49 1 0 22 0.01 2-26 4 41 44 46 2 8 44 46 48 1 00 1988 0.01 2-2 1 40 41 44 1 7 4 4 47 0 800 142 0.01 2 - - 24 28 29 2 24 9 4 4 47. sterisk (*) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow. 27

000Q SERIES Performance Data Discharge Sound Power Levels 000Q Series Quiet Dissipative Silencer Fiberglass coustic Media (FM) Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." w.g. (12Pa) Ps 1.0" w.g. (20Pa) Ps 1." w.g. (7Pa) Ps 2.0" w.g. (00Pa) Ps.0" w.g. (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 200 94 0.8 94 61 49 2 24 0 64 7 41 29 26 1 6 7 42 29 28 67 60 44 2 1 8 68 61 46 2 40 68 62 49 7 6 44 10 71 0.2 7 9 47 0 - - 24 62 2-21 2 6 6 8 24 24 1 6 6 41 27 28 6 6 6 42 29 0 9 64 6 44 44 100 47 0.11 28 40 - - - - 9 47 29 - - 21 7 49-22 0 9 49 8 27 27 9 49 8 0 0 8 7 46 8 1 4 0 24 0.02 48 2 - - - - 7 16 - - 10 0 41 28-16 2 1 9 1 22 2 2 1 8 1 26 27 6 4 1 26 24 42 0 16 0.17 41 60 0 7 0 27 1 6 6 4 6 2 69 60 49 8 4 7 71 61 1 9 7 40 72 6 1 40 8 42 7 6 42 41 4 20 118 0.08 21 7 4 0 - - 22 6 9 29 2 27 66 8 41 2 27 2 68 60 44 4 1 7 68 61 46 2 9 69 62 49 7 42 10 71 0.0 7 41 - - - - 61 47 0 - - 21 62 1 2 20 27 6 40 26 24 2 6 4 42 29 27 6 4 41 100 47 0.01 2 2 6 11 - - - 8 44 22 - - 14 9 48 28 1 1 22 8 49 4 19 17 28 9 49 7 2 21 1 8 48 9 1 29 9 00 26 0.1 1 61 0 6 29 28 6 7 42 8 6 69 61 46 9 8 8 72 64 49 41 9 41 7 6 1 42 40 4 76 68 4 4 42 47 400 189 0.09 22 7 46 2 29 21 22 64 6 9 4 29 29 67 60 4 6 2 70 6 46 7 4 9 72 64 48 8 6 42 74 66 1 9 9 46 00 142 0.06 14 6 4 26 - - - 6 2 28 22 2 68 9 0 2 2 71 9 4 2 29 8 72 60 4 40 74 62 48 6 44 200 94 0.0 7 4 9 - - - - 62 4 29 - - 2 6 1 4 22 21 0 67 9 24 2 66 4 40 26 28 8 67 4 2 44 700 0 0.08 20 62 4 4 7 6 69 8 44 8 40 40 74 6 49 9 4 4 78 66 41 46 49 80 69 4 42 48 1 81 72 8 44 0 4 0 260 0.0 1 9 0 7 1 27 28 66 4 41 6 7 61 47 40 42 76 6 49 7 4 46 77 67 1 8 4 48 78 70 40 48 2 400 189 0.0 7 9 44 29 - - 20 64 2 7 26 0 2 71 8 42 0 6 9 7 62 46 2 40 44 7 6 48 41 46 74 64 1 6 44 49 20 118 0.01 2 8 - - - - 6 4 - - 20 24 4 4 29-26 1 6 44 0-2 6 7 44 0-4 40 6 42 0 22 7 4 1100 19 0 48 69 8 47 4 4 4 72 61 2 46 48 47 78 66 46 0 1 80 69 7 47 1 4 82 71 9 48 2 84 7 62 0 4 8 900 42 0.14 4 6 4 42 8 6 6 70 9 48 42 44 42 76 64 1 4 46 47 79 67 44 48 1 80 69 6 4 49 2 8 7 9 46 1 4 700 0 0.09 22 61 48 1 26 27 68 7 4 7 8 8 7 61 47 8 42 44 77 66 0 9 4 46 79 68 2 40 4 48 81 71 6 42 47 1 00 26 0.0 12 8 44 28 - - - 64 2 8 0 2 2 71 9 42 1 8 74 64 46 4 8 42 7 6 49 40 44 77 67 7 4 48 1400 661 0.27 67 69 7 48 47 49 47 71 60 2 49 2 0 76 64 0 79 67 7 1 81 69 9 1 6 7 8 7 62 7 9 110 4 0 46 64 4 4 44 41 69 8 48 4 47 44 7 62 2 46 0 49 77 6 4 47 1 2 79 68 6 48 2 82 72 9 0 4 6 900 42 0.12 29 60 48 8 8 1 67 4 42 4 40 72 9 48 4 4 4 77 64 1 44 47 48 78 67 44 48 0 80 70 7 46 2 60 07 0.06 16 42 2 0 2 21 64 1 9 4 71 7 4 6 9 40 74 62 47 8 4 4 7 64 49 9 4 47 76 66 41 48 1 100 708 0.2 62 69 2 4 46 49 4 72 9 1 49 1 76 64 4 0 4 80 66 7 1 6 7 81 68 9 2 7 8 84 72 60 8 60 1100 19 0.16 40 66 46 9 40 6 1 68 4 44 46 41 72 9 49 4 48 46 76 62 1 46 49 49 77 6 46 0 1 79 68 6 48 2 4 700 0 0.08 20 6 9 0 2 - - 61 49 9 6 2 68 4 42 7 9 9 71 9 4 8 42 44 72 61 47 9 44 46 7 6 1 41 47 0 200 94 0.01 2 6 - - - - 41 26-2 2 4 1-1 2 8 4 4 2 6 40 9 46 28 8 4 7 46 6 29 40 48 200 1180 0.4 108 69 8 1 1 6 4 71 60 2 8 6 78 66 9 60 61 82 69 61 7 61 6 82 70 6 8 61 64 84 7 6 60 6 66 200 967 0.1 77 66 46 47 0 46 70 8 1 0 4 2 77 64 2 7 6 78 66 8 8 8 80 67 60 4 9 60 82 70 62 7 61 6 1600 7 0.20 0 61 49 41 4 4 7 70 6 48 47 1 46 74 60 1 48 0 76 6 0 4 78 6 6 1 6 79 69 9 4 8 8 110 4 0.11 28 42 28 2 62 1 42 42 42 8 68 6 46 44 46 44 72 60 49 46 49 48 72 62 0 46 0 0 7 6 4 48 260 121 0.29 7 66 4 49 1 1 47 69 9 4 6 7 64 8 6 8 7 77 67 62 8 60 60 79 68 64 9 61 61 81 71 67 6 64 64 2100 991 0 48 9 48 4 4 4 8 67 7 0 0 2 48 71 61 2 2 7 64 9 7 76 66 61 7 9 7 78 69 64 61 62 61 10 71 0.11 28 8 44 7 8 2 2 61 1 4 4 4 40 67 6 2 49 49 46 71 60 6 2 1 7 6 8 4 76 66 61 7 8 7 1000 472 0.0 1 8 28 - - - 8 46 42 9 7 4 64 48 44 44 42 68 7 1 47 48 47 69 9 49 0 49 71 61 7 1 72 178 0. 12 6 4 9 6 61 * * * * * * 78 66 64 8 6 61 79 69 6 60 64 6 82 72 67 61 6 6 86 74 69 62 6 6 2800 121 0.0 76 9 49 46 48 48 4 64 1 1 2 48 72 61 7 2 74 64 60 4 7 6 76 66 61 8 7 79 69 64 7 60 60 1800 849 0.14 4 41 7 7 1 2 60 1 4 4 4 9 66 6 0 46 47 4 69 9 48 0 49 70 60 49 1 1 72 64 9 2 800 78 0.0 8 1 8 - - - - 42 0 1 0 7 46 42 7 9 40 60 0 47 41 44 46 9 1 48 4 47 48 61 4 1 48 0 4 42 201 0.01 2 2 40 - - - - 2 8 4 28 29 28 1 40 9 6 40 7 4 4 42 41 4 46 4 44 4 4 47 49 46 4 4 1 4 8000 77 0.4 107 7 66 68 66 68 67 78 6 67 6 67 64 84 74 71 72 74 70 91 79 80 77 80 7 92 82 80 76 80 80 97 8 87 8 86 82 7000 0 0.1 78 72 64 6 62 6 6 76 62 66 64 66 6 82 7 70 70 72 69 87 78 77 7 7 7 90 81 79 7 78 78 92 8 82 78 82 81 0 22 0.01 2 68 8 9 6 7 74 67 6 6 6 62 80 72 69 68 70 68 86 78 76 72 7 7 88 80 78 74 76 76 90 82 81 77 80 80 00 201 0.01 2 67 8 9 6 7 72 66 64 62 64 61 78 71 68 66 68 67 8 77 7 71 72 72 86 79 77 7 74 74 88 81 80 76 78 79 800 179 0.01 2 61 1 2 48 48 46 68 9 7 4 2 72 64 61 8 9 8 7 67 6 61 62 62 76 69 67 6 64 64 78 71 70 66 68 69 For performance table notes, see page 0; highlighted numbers indicate embedded RI certification points. 28

000Q SERIES Performance Data Radiated Sound Power Levels 000Q Series Quiet Dissipative Silencer Fiberglass coustic Media (FM) Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." w.g. (12Pa) Ps 1.0" w.g. (20Pa) Ps 1." w.g. (7Pa) Ps 2.0" w.g. (00Pa) Ps.0" w.g. (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 200 94 0.8 94-6 2 - - - 9 7 8 29 29 49 46 4 7 0 29 2 47 40 2 1 0 42 4 47 7 7 10 71 0.2 7-29 1 - - - 40 6 0 2 2 47 46 40 4 28 26 49 0 47 9 1 0 47 48 48 4 4 2 48 48 48 0 40 7 100 47 0.11 28 - - - - - - - 7 2 27 - - - 4 42 4 27 2-44 4 41 2 29-4 46 46 6 2-42 44 1 4 8 0 24 0.02 - - - - - - - 7 8 0 - - - 6 41 40 2 27-40 4 8 1-40 4 8 1-2 6 7 7 0 16 0.17 41 48 9 2 0 27 2 4 9 8 7 2 48 4 8 6 2 9 1 49 40 9 4 61 4 1 42 40 6 61 7 4 44 40 20 118 0.08 21-1 2 2-0 40 6 2 0 2 4 4 42 2 28 48 4 0 6 1 48 7 7 2 7 1 42 41 10 71 0.0 7 - - - - - - 49 1 2 20-0 41 9 0 29 21 0 4 4 4 27 48 4 4 40 9 1 1 4 46 46 44 7 100 47 0.01 2 - - - - - - - 29 - - - - 9 8 28 26 - - 40 42 6 4 26 46 40 4 4 41 1 47 41 4 47 46 7 00 26 0.1 1 48 44 8 6 0 28 49 48 42 40 0 7 2 46 41 2 60 4 49 4 6 4 62 7 1 4 40 8 6 9 47 4 42 400 189 0.09 22-42 28 26 49 46 9 0 28 6 49 44 8 2 29 9 2 47 40 6 62 4 49 42 9 6 64 8 4 4 42 41 00 142 0.06 14-4 27 26 - - 47 42 29 2-46 40 0 28 8 49 44 6 2 9 1 47 8 6 4 60 1 4 9 9 200 94 0.0 7 - - - - - - 47 6 0 24 - - 4 8 0 29 28 4 4 2 1 0 47 44 6 2 2 49 46 4 7 7 700 0 0.08 20 49 46 48 7 2 49 48 4 7 1 0 6 1 47 40 4 1 62 7 2 4 7 4 66 60 48 40 7 68 64 60 2 44 42 0 260 0.0 1 48 4 41 27 2 48 44 40 2 28 26 49 4 8 2 0 61 4 49 4 6 64 8 2 4 8 6 6 61 7 0 42 40 400 189 0.0 7 46 9 - - 46 4 8 0 26 20 48 4 7 1 29 7 1 46 41 4 2 9 49 44 6 4 60 6 2 47 40 40 20 118 0.01 - - 20 1 - - - 9 4 28 21-1 46 41 29 27 4 47 4 8 1 0 48 44 40 2 49 46 4 7 8 1100 19 0 48 2 0 4 7 4 7 1 46 7 2 60 4 1 40 8 6 7 4 42 6 67 60 6 4 44 9 70 6 60 49 48 42 900 42 0.14 4 1 47 40 4 1 29 6 0 4 7 4 1 8 49 9 7 6 6 1 42 42 6 6 8 4 44 44 9 68 60 6 47 48 42 700 0 0.09 22 0 4 7 1 29 2 1 47 42 1 28 7 1 47 7 6 2 61 0 40 9 6 1 42 41 7 64 9 6 4 44 40 00 26 0.0 12-8 0 27 24-0 44 9 1 29 2 48 44 4 1 8 1 47 7 7 9 49 9 9 6 61 2 4 4 40 1400 661 0.27 67 1 46 46 44 7 2 47 46 41 8 7 49 42 7 64 8 47 41 7 66 6 7 0 4 40 69 67 61 4 47 44 110 4 0 46 0 4 44 41 4 4 1 46 4 40 6 6 2 47 41 6 4 62 6 1 4 9 7 64 61 49 42 9 67 64 9 2 46 4 900 42 0.12 29 48 40 9 6 0 29 0 4 42 7 2 0 6 0 4 40 60 4 49 44 9 6 6 8 2 47 41 8 64 61 6 0 44 42 60 07 0.06 16 47 6 1 28 21-49 41 6 1 28 2 4 48 42 7 2 0 7 1 46 41 9 4 49 44 8 6 60 7 2 47 41 9 100 708 0.2 62 4 4 4 8 4 26 6 48 46 9 0 8 0 44 8 4 62 7 48 42 8 64 9 0 4 41 66 64 9 4 48 4 1100 19 0.16 40 1 7 0 2-46 42 1 27 0 47 41 1 60 4 0 4 9 6 61 6 1 47 42 9 64 61 1 4 4 700 89 0.08 20-29 2 - - 0 4 8 2 29 2 48 4 8 0 8 2 47 42 7 4 9 4 49 44 9 7 61 7 49 4 41 200 260 0.01 - - - - - - - 8 29 2-1 44 8 4 0 28 47 42 8 4 2 6 0 4 41 6 7 2 48 4 40 8 200 1180 0.4 108 7 4 0 42 6 60 7 46 41 8 6 61 4 0 42 9 66 6 7 4 41 67 64 9 48 44 70 69 6 9 2 0 200 967 0.1 77 0 48 44 7 8 1 46 9 61 9 49 42 7 64 61 6 2 4 41 6 62 8 48 44 68 67 61 8 1 49 1600 7 0.20 0 2 4 41 6 0 27 6 2 4 40 4 0 9 6 49 46 8 61 8 49 42 9 62 60 1 44 42 6 64 8 48 46 110 4 0.11 28 47 8 1 27 2-2 48 40 6 0 26 2 4 41 4 2 8 49 4 8 6 9 7 1 48 41 9 61 60 2 4 44 260 121 0.29 7 7 0 46 42 8 6 49 44 40 62 60 48 4 9 64 6 6 0 47 44 6 66 9 2 49 47 69 69 6 7 2 0 2100 991 0 48 4 48 44 9 0 6 46 41 7 1 60 7 0 44 41 8 6 61 48 44 4 64 6 7 0 46 4 66 66 60 0 48 10 71 0.11 28 46 40 0 26-1 48 42 1 27 7 48 40 6 60 8 2 4 40 9 60 60 47 4 41 62 6 7 2 47 4 1000 472 0.0 1 - - - - - - 48 4 7 1 28 24 2 1 4 7 1 4 46 41 7 6 49 44 40 8 6 7 2 48 4 42 72 178 0. 12 8 8 1 4 8 * * * * * * 64 62 7 48 9 67 66 60 6 0 4 69 69 62 7 1 49 71 72 6 9 49 2800 121 0.0 76 4 1 49 4 7 2 9 0 44 8 2 62 9 47 41 6 6 7 0 44 9 66 6 9 2 46 41 68 69 62 6 0 46 1800 849 0.14 4 47 40 7 0 24-2 49 42 6 2 27 7 49 41 6 2 9 9 2 44 9 61 61 4 48 42 8 62 64 7 2 46 4 800 991 0.0 8 49 44 41 4 28-4 0 44 7 4 28 9 7 0 42 7 2 61 60 4 40 6 6 6 6 49 4 9 64 6 8 47 44 42 201 0.01 2 - - - - - - - 2 - - - 42 42 26 27 26 4 44 6 1 0 29 44 46 9 2 2 44 47 40 8 6 8 8000 000 0.4 107 7 6 66 60 9 4 7 69 67 61 9 4 76 7 72 66 6 7 78 7 74 69 6 9 80 77 76 71 66 60 82 79 79 74 69 62 7000 0 0.1 78 67 64 6 9 7 71 68 66 60 8 7 72 71 6 62 6 77 74 7 68 64 8 79 76 7 70 6 9 81 78 78 7 68 61 0 22 0.01 2 6 7 7 2 2 47 67 64 6 7 4 49 70 68 68 62 8 72 70 70 6 60 74 72 72 68 62 6 76 74 7 71 64 8 00 1988 0.01 2 62 6 6 1 1 46 66 6 62 6 48 69 67 67 61 7 2 71 69 69 64 9 4 7 71 71 67 61 7 7 74 70 6 7 800 142 0.01 2 61 2 0 46 4 40 62 60 60 4 0 4 66 64 64 9 4 49 68 66 67 62 6 1 69 68 69 64 8 2 72 70 71 67 60 4 For performance table notes, see page 0; highlighted numbers indicate embedded RI certification points. 29

000Q SERIES Performance Data RI Certification and Performance Notes 000Q Series Quiet Dissipative Silencer RI Certification Rating Points Fiberglass coustic Media (FM) Min. Inlet Discharge Sound Power Levels @ 1." w.g. (7 Pa) Ps Performance Notes for Sound Power Levels: 1. Discharge sound power is the noise emitted from the unit discharge into the downstream duct. Discharge Sound Power Levels (SL) now include duct end reflection energy as part of the standard rating. Including the duct end correction provides sound power levels that would normally be transmitted into an acoustically, non-reflective duct. The effect of including the energy correction to the discharge SL, is higher sound power levels when compared to previous RI certified data. For more information on duct end reflection calculations see RI Standard 880. 2. Radiated sound power is the breakout noise transmitted through the unit casing walls.. Sound power levels are in decibels, db re 10-12 watts. Radiated Sound Power Levels @ 1." w.g. (7 Pa) Ps Inlet irflow Ps Octave Band Octave Band cfm I/s "w.g. Pa 2 4 6 7 2 4 6 7 4 10 71 0.2 7 6 6 41 27 28 6 49 0 47 9 1 0 20 118 0.08 21 68 60 44 4 1 7 48 4 0 6 400 189 0.09 22 70 6 46 7 4 9 9 2 47 40 6 7 0 260 0.0 1 76 6 49 7 4 46 61 4 49 4 6 8 700 0 0.09 22 77 66 0 9 4 46 61 0 40 9 9 900 42 0.12 29 77 64 1 44 47 48 60 4 49 44 9 6 10 1100 19 0.16 40 76 62 1 46 49 49 60 4 0 4 9 6 12 1600 7 0.20 0 76 6 0 4 61 8 49 42 9 14 2100 991 0 48 7 64 9 7 6 61 48 44 4 16 2800 121 0.0 76 74 64 60 4 7 6 6 6 7 0 44 9 24 x 16 0 22 0.01 2 86 78 76 72 7 7 72 70 70 6 60 Ratings are certified in accordance with RI Standards. 4. ll sound data listed by octave bands is raw data without any corrections for room absorption or duct attenuation. Dash (-) in space indicates sound power level is less than 20 db or equal to background.. Minimum inlet Ps is the minimum operating pressure requirement of the unit (damper full open) and the difference in static pressure from inlet to discharge of the unit. 6. sterisk (*) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow. 7. Data derived from independent tests conducted in accordance with NSI/SRE Standard 10 and RI Standard 880. 0

0Q SERIES 0Q SERIES OSPITL GRDE QUIET TYPE IT DISSIPTIVE SILENCER PRODUCT OVERVIE Nailor 0Q Series Single Duct ospital Grade Terminal units control the flow of conditioned primary air in a constant or variable air volume (VV) VC system. Each unit is comprised of a VV terminal section coupled with a factory installed dissipative silencer and unique design features specifically tailored for IQ (Indoor ir Quality) sensitive hospital applications. Integral electric or hot water coil sections are also available for re-heat applications. ospital projects frequently size VV terminals more aggressively than general office buildings due to increased space restrictions. The 0Q Series design and construction addresses hospital environments that require both low sound operating levels and high IQ adherence. Many of the 0Q Series standard features such as the inclined opposed damper and Diamond Flow Sensor are borrowed from the robust 000 Series of terminal units. Other features, like the silencer and liners options, are specifically chosen to address hospital maintenance and sanitation practices. The factory installed dissipative silencer provides minimal impact on system pressure drop while simultaneously delivering superior sound attenuation. By combining optimized side baffle geometry with mylar encapsulated fiberglass acoustic media, the silencer provides excellent attenuation. hile quiet operation is paramount, maintenance and sanitation requirements cannot be overlooked. The mylar barrier, encased within the silencer side baffles, prevents entrainment of fiberglass fibers into the airstream and acts a vapor barrier to the acoustics media, preventing mold and fungi growth. ll 0Q Series VV sections include Steri-Liner, a rigid fiberglass board with a reinforced non-porous aluminum FSK (Foil-scrim- Kraft). This insulation is also found in the silencer sections not covered by the sound attenuating side baffles. Steri-Liner provides a durable, cleanable surface while offering excellent insulating and sound absorbing characteristics. nother benefit to using Steri-Liner in the factory installed silencer is that the internal insulation eliminates the need for field applying thermal duct wrap, thus saving on additional labor and costs. In the past, selecting a silencer to mate with a VV terminal involved multiple calculations, guesswork and an intimate knowledge of silencer performance. The engineer or contractor had to contend with pressure classes, sizes and free area to balance the associated pressure drop, attenuation and self generated noise against the VV terminal performance. Even after careful selection, the result was still a guess due to the unknown system effect created by the close coupled terminal/silencer assembly. Since each 0Q Series unit is designed, manufactured and tested as a complete assembly, the guesswork is eliminated. 0Q Cooling or eating only 0Q Cooling with ot ater Reheat 0QE Cooling with Electric Reheat 1

0Q SERIES SINGLE DUCT VRIBLE OR CONSTNT IR VOLUME 0Q SERIES OSPITL GRDE DISSIPTIVE SILENCER SUPER QUIET Models: 0Q Cooling or eating only 0Q Cooling with ot ater Reheat 0QE Cooling with Electric Reheat Inclined opposed blade damper configuration minimizes noisy turbulence and provides smooth, accurate, near linear flow control. Model 0Q ospital system designs have to contend with the presence of infectious diseases, chemical hazards, biological contaminants and low sound level requirements. The 0Q hospital grade terminal unit has been purposely designed to address these parameters by using innovative options and construction methods, resulting in simplified maintenance and improved sound performance. Each unit includes a factory mounted dissipative silencer that maximizes acoustical attenuation, minimizes pressure loss and reduces self-generated sound. Steri-liner insulation offers a durable, cleanable surface throughout the VV section and the exposed silencer portions. By fully lining the silencer, there is no need to field apply external thermal duct wrap. Optional components such as access doors and removable flow sensors enhance the functionality of the 0Q Series units to provide optimum performance and flexibility in hospital environments. STNDRD FETURES: Designed for hospital and other critical environment applications where IQ (Indoor ir Quality) is a concern. 22 ga. (0.86) galvanized steel casing, mechanically sealed, low leakage construction. 16 ga. (1.6) corrosion-resistant steel inclined opposed blade damper with extruded PVC seals (single blade on size 4,, 6). 4 rotation, C to close. Tight shut-off. Damper leakage is less than 2% of the terminal rated airflow at " w.g. (746 Pa) dia. plated steel drive shaft. n indicator mark on the end of the shaft shows damper position. Multi-point averaging Diamond Flow Sensor. luminum construction. Supplied with balancing tees. Rectangular discharge with slip and drive cleat duct connection. Full NEM 1 type controls enclosure for factory mounted controls. VV section is lined with 1/16" (21) thick, 4 lb. density Steri-Liner insulation. Fiberglass with a reinforced aluminum FSK facing. Meets the requirements of NFP 90, UL 181 and STM C6. Right-hand controls location is standard and is determined looking into direction of airflow. Optional left hand controls mounting is available. Unit is flippable. Caution: If unit has access door. vailable in 11 sizes ranging from 0 to 80 cfm (0-91 l/s) for 0Q and 0Q units. 2-80 cfm (12-91 l/s) on 0QE. Silencer Section: Designed to mate with VV section for optimum performance and quiet operation. Optimized internal baffle geometry reduces self-generated noise, maximizes acoustic attenuation. 22 ga. (0.86) coated steel perforated baffles with 1% free area encapsulate fiberglass acoustic media. Mylar lining with acoustical spacer isolates material from airstream. Internal Steri-Liner insulation on top and bottom optimizes sound reduction and eliminates need for external field applied thermal duct wrap. Options and ccessories: Bottom access door. FMI Removable insert type Diamond Flow Sensor. 24 VC control transformer. Toggle disconnect switch. anger brackets. Controls enclosure for field or factory mounted controls. Dust tight enclosure seal. 20 ga. (1.00) construction. 2

0Q SERIES Dimensions Model 0Q ospital Grade Dissipative Silencer nalog Electronic and Digital Controls full NEM 1 controls enclosure is provided for factory mounted controls. Optional for field mounted controls. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 14" (6) RECTNGULR DISSIPTIVE MYLR LINED SILENCER SLIP ND DRIVE CONNECTION Pneumatic Controls Universal pneumatic control mounting panel features double wall stand-off construction for strength and rigidity. Controls mounting screws do not penetrate terminal casing. MULTI-POINT VERGING FLO SENSOR 6" INLET: ROUND, FLT OVL OR RECTNGULR IRFLO 11" (279) OPTIONL (FMI) REMOVBLE FLO SENSOR (140) UNIVERSL PNEUMTIC CONTROL MOUNTING PNEL ND PROTECTIVE SROUD DMPER DRIVESFT 1 (94) OPTIONL CCESS DOOR 1 (108) 6" (914) RECTNGULR DISSIPTIVE MYLR LINED SILENCER SLIP ND DRIVE CONNECTION 6" 6 (16) IRFLO DMPER DRIVESFT 6" OPTIONL (FMI) REMOVBLE FLO SENSOR (140) 14 (68) 1 (94) OPTIONL CCESS DOOR 1 (108) 6" (914) 6" Dimensional Data Unit Inlet 4 10 (24) 10 (24) 7/8 (98) Round 10 (24) 10 (24) 4 7/8 (124) Round 6 10 (24) 10 (24) 7/8 (149) Round 7 12 (0) 12 1/2 (18) 6 7/8 (17) Round 8 12 (0) 12 1/2 (18) 7 7/8 (200) Round 9 14 (6) 12 1/2 (18) 8 7/8 (22) Round 10 14 (6) 12 1/2 (18) 9 7/8 (21) Round 12 18 (47) 12 1/2 (18) 12 1/16 x 9 1/16 (29 x 249) Oval 14 24 (610) 12 1/2 (18) 16 1/16 x 9 1/16 (408 x 249) Oval 16 28 (711) 12 1/2 (18) 19 /16 x 9 1/16 (487 x 249) Oval 24 x 16 8 (96) 18 (47) 2 7/8 x 1 7/8 (606 x 40) Rect.

0Q SERIES Dimensions Model 0Q ospital Grade Dissipative Silencer ot ater Reheat Coil One, two, three and four row available. ot water coils have copper tubes and aluminum ripple fins. Coils have, 7/8" (22) or 1 /8" () O.D. sweat connections. Right or left hand coil connection is determined by looking through the terminal inlet in the direction of airflow. Galvanized steel casing with slip and drive discharge duct connection. Optional low leakage gasketed access door is recommended for coil access and cleaning. RI Certified coils. Coil Performance data on pages 40-48. MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR 6" CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS IRFLO 11" (279) OPTIONL (FMI) REMOVBLE FLO SENSOR (140) 14" (6) DMPER DRIVESFT 1 (94) 0QE ospital Grade Dissipative Silencer Integral Electric Reheat Electric coil is factory mounted in an integral extended plenum section. RECTNGULR DISSIPTIVE MYLR LINED SILENCER 48" (1219) 6 (161) OPTIONL CCESS DOOR SLIP ND DRIVE CONNECTION L Full details and selection guide on page 49. 6" MULTI-POINT VERGING FLO SENSOR INLET: ROUND, FLT OVL OR RECTNGULR CONTROLS ENCLOSURE FOR FCTORY MOUNTED CONTROLS 29" (77) RECTNGULR DISSIPTIVE MYLR LINED SILENCER SLIP ND DRIVE CONNECTION 6" Dimensional Data Unit IRFLO 11 /4" (298) OPTIONL (FMI) REMOVBLE FLO SENSOR (140) PRIMRY IR VLVE CONTROLS ENCLOSURE OPTIONL CCESS DOOR Inlet ELECTRIC COIL CONTROLS ENCLOSURE (INGED CCESS DOOR) 1" (787) 79" (2007) 48" (1219) Coil Connections 1 Row 2 Row Row 4 Row 6" ot ater Coil L (1 & 2 Row) L ( & 4 Row) 4 10 (24) 10 (24) 7/8 (98) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 (24) 10 (24) 4 7/8 (124) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 6 10 (24) 10 (24) 7/8 (149) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 7 12 (0) 12 1/2 (18) 6 7/8 (17) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 8 12 (0) 12 1/2 (18) 7 7/8 (200) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 9 14 (6) 12 1/2 (18) 8 7/8 (22) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 10 14 (6) 12 1/2 (18) 9 7/8 (21) Round 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 12 18 (47) 12 1/2 (18) 12 1/16 x 9 1/16 (29 x 249) Oval 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 14 24 (610) 12 1/2 (18) 16 1/16 x 9 1/16 (408x 249) Oval 1/2 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 16 28 (711) 12 1/2 (18) 19 /16 x 9 1/16 (487 x 249) Oval 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) (127) 7 1/2 (191) 24 x 16 8 (96) 18 (47) 2 7/8 x 1 7/8 (606 x 40) Rect. 7/8 (22) 7/8 (22) 1 /8 () 1 /8 () (127) 7 1/2 (191) 4-29-17

0Q SERIES Recommended irflow Ranges For Single Duct Terminal Units The recommended airflow ranges below are for 0Q Series single duct terminal units with pressure independent controls and are presented as ranges for total and controller specific minimum and maximum airflow. irflow ranges are based upon maintaining reasonable sound levels and controller limits using Nailor's Diamond Flow Sensor as the airflow measuring device. For a given unit size, the minimum, auxiliary minimum (where applicable) and the maximum flow setting must be within the range limits to ensure pressure independent operation, accuracy and repeatability. Minimum airflow limits are based upon.02" w.g. ( Pa) differential pressure signal from Diamond Flow Sensor on analog/ digital controls and.0" (7.) for pneumatic controllers. This is a realistic low limit for many transducers used in the digital controls industry. Check your controls supplier for minimum limits. Setting airflow minimums lower, may cause damper hunting and result in a failure to meet minimum ventilation requirements. Factory settings will therefore not be made outside these ranges; however, a minimum setting of zero (shut-off) is an available option on pneumatic units. here an auxiliary setting is specified, the value must be greater than the minimum setting. The high end of the tabulated Total irflow Range on pneumatic and analog electronic controls represents the Diamond Flow Sensor's differential pressure reading at 1" w.g. (20 Pa). The high end airflow range for digital controls is represented by the indicated transducer differential pressure. Imperial Units, Cubic Feet per Minute Unit Inlet Type Total irflow Range, cfm Metric Units, Liters per Second irflow at 2000 fpm Inlet Velocity (nom.), cfm Model 0Q SRE 10 "Performance Rating of ir Terminals" is the method of test for the certification program. The "standard rating condition" (certification rating point) airflow volumes for each terminal unit size are tabulated below per RI Standard 880. These air volumes equate to an approximate inlet velocity of 2000 fpm (10.2 m/s). hen digital or other controls are mounted by Nailor, but supplied by others, these values are guidelines only, based upon experience with the majority of controls currently available. Controls supplied by others for factory mounting are configured and calibrated in the field. irflow settings on pneumatic and analog controls supplied by Nailor are factory preset when provided. Range of Minimum and Maximum Settings, cfm Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( "w.g.) Min. Max. Min. Max. Min. Max..0 1.0.02 1.0.02 1.0 1.2 1. 4 0 22 10 0 180 2 180 2 180 200 22 Round 0 400 20 2 4 2 4 2 60 400 6 0 0 400 80 40 6 40 6 40 00 0 7 0 800 0 11 60 9 60 9 60 72 800 8 0 1100 700 1 900 12 900 12 900 1000 1100 Round 9 0 1400 900 200 110 16 110 16 110 128 1400 10 0 1840 1100 260 100 21 100 21 100 167 1840 12 0 200 1600 200 290 200 290 200 200 200 14 Flat Oval 0 12 2100 440 20 60 20 60 20 280 12 16 0 72 2800 2 040 40 040 40 040 400 72 24 x 16 Rect. 0 80 0 1180 6800 960 6800 960 6800 7600 80 Unit Inlet Type Total irflow Range, l/s irflow at 10.2 m/s Inlet Velocity (nom.), l/s Range of Minimum and Maximum Settings, l/s Pneumatic 000 Controller nalog Electronic Controls Digital Controls Transducer Differential Pressure ( Pa ) Min. Max. Min. Max. Min. Max. 7. 249 249 249 11 74 4 0 106 71 14 8 12 8 12 8 94 106 Round 0 189 118 26 1 21 1 21 1 170 189 6 0 260 189 8 212 1 212 1 212 26 260 7 0 78 260 4 07 4 07 4 07 42 78 8 0 19 0 7 42 9 42 9 42 472 19 Round 9 0 661 42 94 4 78 4 78 4 606 661 10 0 868 19 12 708 101 708 101 708 790 868 12 0 1180 7 168 967 17 967 17 967 108 1180 14 Flat Oval 0 147 991 208 120 170 120 170 120 14 147 16 0 178 121 248 14 20 14 20 14 1604 178 24 x 16 Rect. 0 91 22 7 209 4 209 4 209 86 91

0Q SERIES Performance Data NC Level pplication Guide Model 0Q ospital Grade Dissipative Silencer Terminal: Steri-Liner Silencer: Mylar, Spacer, Steri-Liner (MSSL) Media Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet NC Levels @ Inlet Pressure ( Ps) shown DISCRGE RDITED Ps cfm l/s "w.g. Pa Min. 0." 1.0" 1." 2.0".0" Min. 0." 1.0" 1." w.g. w.g. w.g. w.g. w.g. w.g. w.g. w.g. Ps Ps (12 Pa) (20 Pa) (7 Pa) (00 Pa) (70 Pa) (12 Pa) (20 Pa) (7 Pa) 2.0" w.g. (00 Pa).0" w.g. (70 Pa) 200 94 0.40 99 - - 21 2 2 26 - - - 21 24 28 10 71 0.24 60 - - 20 21 21 21 - - - 21 22 22 100 47 0.12 0 - - - - - - - - - - 20 2 0 24 0.0 7 - - - - - - - - - - - - 0 16 0.17 41 - - 20 2 24 26 - - - 2 2 0 20 118 0.08 20 - - 21 24 24 2 - - - - 22 2 10 71 0.0 7 - - - - - - - - - - - 20 100 47 0.01 2 - - - - - - - - - - - - 00 26 0.10 24-20 24 28 0 - - 20 2 26 0 400 189 0.06 1 - - 2 26 29 1 - - - 21 2 29 00 142 0.0 8-20 26 29 0 - - - 20 21 2 200 94 0.01 4 - - 2 24 24 2 - - - - - 20 700 0 0.09 2 - - 24 29 1 4 22-21 26 0 0 260 0.06 16 - - 26 29 0 - - - 24 28 2 400 189 0.04 9 - - 2 2 2 28 - - - 20 2 26 20 118 0.02 4 - - - 20 21 21 - - - - - 20 1100 19 0.18 4 21 2 0 4 6 40-20 2 29 1 900 42 0.1 2-21 28 4 8 - - 2 26 29 700 0 0.08 21 - - 2 0 1 - - 21 24 26 1 00 26 0.0 11 - - 26 29 0 1 - - - 21 2 26 1400 661 0.16 9-24 0 4 9 20 20 2 28 4 8 110 4 0.11 27-21 2 0 1 - - 21 2 1 900 42 0.07 17 - - 2 28 0 - - - 2 28 1 60 07 0.04 10 - - 2 26 28 29 - - - 20 2 26 100 708 0.2 61-24 1 4 8-20 24 28 0 1100 19 0.14 4-2 26 0 1 4 - - 21 24 2 1 700 0 0.06 14 - - 2 2 2 28 - - - - 21 24 200 94 0.01 2 - - - - - - - - - - - - 200 1180 0.44 110 24 24 6 8 40 29 28 1 4 40 200 967 0.1 76-2 0 4 6 22 2 29 1 8 1600 7 0 48-20 2 29 0 4-20 2 28 0 110 4 0.10 26 - - - 2 24 26 - - 20 24 26 0 260 121 0.29 72-2 0 1 6 24 2 0 4 7 40 2100 991 0 46-2 26 28 29-21 26 1 4 7 10 71 0.10 26 - - - 24 26 29 - - 24 28 0 4 1000 472 0.04 11 - - - 20 20 2 - - - 21 2 26 72 178 0. 12 0 * 9 4 4 0 * 7 40 44 2800 121 0.0 7 - - 26 0 4 2 24 29 4 6 40 1800 849 0.1 1 - - - 21 2 2 - - 24 29 1 700 0 0.0 6 - - - - - - - - - - - 21 42 201 0.01 2 - - - - - - - - - - - - 8000 000 0.4 107 4 9 40 46 0 44 4 48 0 6 7000 0 0.1 78 2 6 8 44 48 49 40 41 47 49 1 0 22 0.01 2 21 6 4 4 46 2 8 44 46 48 1 00 1988 0.01 2 20 1 6 41 4 4 1 7 4 4 47 0 800 142 0.01 2-20 2 29 0 24 9 4 4 47 Performance Notes: 1. NC Levels are calculated based on procedures as outlined on page 72. 2. Dash (-) in space indicates a NC less than 20.. sterisk (*) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow. 6

0Q SERIES Performance Data Discharge Sound Power Levels 0Q Series ospital Grade Dissipative Silencer Terminal: Steri-Liner Silencer: Mylar, Spacer, Steri-Liner (MSSL) Media Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." w.g. (12Pa) Ps 1.0" w.g. (20Pa) Ps 1." w.g. (7Pa) Ps 2.0" w.g. (00Pa) Ps.0" w.g. (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 200 94 0.40 99 60 4 48 44 2 4 62 9 7 2 0 4 6 61 7 0 0 7 68 64 8 1 2 9 68 6 9 2 4 42 69 66 62 6 4 10 71 0.24 60 8 49 4-2 60 6 49 42 2 27 64 8 4 26 2 6 60 48 29 7 6 62 7 49 1 40 64 62 9 4 4 4 100 47 0.12 0 44 27 - - 8 1 44 6-21 61 4 48 41 22 29 60 6 2 4 27 4 60 6 49 0 7 60 2 4 0 24 0.0 7 0 22 10 - - 4 44 0 20 - - 7 48 9 2 1 21 2 48 46 9 21 29 1 47 47 4 26 1 44 47 0 40 0 16 0.17 41 60 2 4 41 2 64 8 4 1 4 67 62 8 6 9 69 64 60 4 8 42 70 6 61 9 4 72 67 62 7 40 46 20 118 0.08 20 8 47 9 6-2 61 6 48 4 2 27 6 9 1 47 28 4 67 62 49 0 8 67 6 0 2 40 68 6 8 2 4 44 10 71 0.0 7 6 42 29 - - - 8 49 40-2 6 4 4 40 20 0 62 6 49 4 24 6 6 7 1 4 26 8 6 7 4 2 2 42 100 47 0.01 2 7 21 - - - 4 4 28-17 61 0 8 4 1 26 9 4 7 17 2 9 46 40 19 9 2 0 0 27 40 00 26 0.10 24 60 4 40 2 2 67 60 2 48 8 7 70 6 7 0 40 40 7 68 61 4 42 44 74 70 62 4 4 7 72 64 7 44 48 400 189 0.06 1 7 49 40 2 24 6 9 49 4 1 1 69 64 47 7 71 67 8 1 7 41 72 69 9 2 7 42 7 71 61 4 40 46 00 142 0.0 8 4 4 27 - - 64 7 46 9 2 26 69 61 1 4 27 71 64 4 47 0 8 72 6 6 48 1 40 74 67 9 0 2 44 200 94 0.01 4 40 - - - - 61 0 41-22 66 47 9-1 67 9 0 42 21 6 67 9 2 4 22 8 68 60 48 2 42 700 0 0.09 2 61 7 47 4 67 60 2 44 8 40 72 64 8 48 9 4 76 68 62 1 40 48 78 71 64 2 41 49 79 74 68 44 0 260 0.06 16 8 2 46 40 2 27 6 6 0 41 2 6 72 6 6 4 4 41 74 67 9 48 6 4 7 69 62 49 8 47 76 72 6 1 40 1 400 189 0.04 9 4 7 0 - - 6 47 6 24 29 69 60 41 0 7 71 64 6 4 2 42 71 66 9 4 44 72 68 62 48 6 48 20 118 0.02 4 40 27 - - - 60 0 4 1-26 6 6 48 2 4 64 9 8 27 9 6 9 4 40 28 41 6 61 7 4 2 4 1100 19 0.18 4 70 61 2 44 44 7 64 9 49 49 77 67 61 1 4 80 71 64 1 7 82 72 6 6 1 8 8 76 68 60 2 60 900 42 0.1 2 66 8 0 47 7 7 70 62 48 4 4 7 6 8 0 4 0 79 69 62 2 47 80 71 6 4 47 8 74 66 6 47 700 0 0.08 21 62 2 4 9 26 27 68 9 0 4 7 9 7 6 46 9 4 77 67 8 48 9 47 78 69 60 0 40 48 81 72 6 2 42 2 00 26 0.0 11 6 44 28 - - 64 4 4 7 29 72 60 0 40 0 8 74 64 4 42 7 66 6 4 4 76 67 9 47 7 48 1400 661 0.16 9 68 7 1 46 46 72 62 9 6 2 77 66 61 4 80 69 6 6 8 81 70 64 6 4 9 84 74 67 9 61 110 4 0.11 27 67 47 4 8 7 70 60 4 0 48 46 7 64 7 0 49 1 77 67 60 2 0 4 78 69 62 0 81 7 6 6 1 7 900 42 0.07 17 6 48 41 8 28 28 67 7 0 44 41 41 71 61 4 46 4 4 7 6 7 48 44 48 77 68 9 0 4 0 79 71 6 2 47 60 07 0.04 10 41 4 28 - - 62 4 8 2 4 69 8 0 41 4 9 72 6 4 44 7 44 7 6 6 4 9 46 74 67 60 48 42 0 100 708 0.2 61 66 49 49 48 44 72 61 1 78 66 9 80 69 62 6 6 7 81 70 6 7 6 9 8 7 6 8 6 60 1100 19 0.14 4 61 48 42 4 7 2 71 8 0 47 47 4 74 62 49 49 48 77 6 7 0 49 0 78 67 8 1 49 2 80 70 61 0 700 0 0.06 14 41 4 29 - - 6 4 40 4 71 8 48 42 7 9 7 62 2 44 9 4 7 64 4 40 46 7 66 7 47 4 49 200 94 0.01 2 2 8 - - 20 20 4 1 - - 22 6 46 8 27 24 1 7 48 41 2 0 9 6 47 42 2 42 8 48 42 4 46 200 1180 0.44 110 72 62 6 6 72 62 7 6 79 67 61 6 9 61 82 70 64 8 60 6 8 72 6 9 61 64 8 74 68 62 62 67 200 967 0.1 76 68 8 0 49 2 49 71 61 1 4 77 6 7 6 6 79 67 61 7 9 80 68 6 6 8 61 82 71 6 9 60 6 1600 7 0 48 62 1 44 4 44 9 69 7 49 48 49 46 7 61 4 0 2 1 76 64 8 2 4 77 66 9 7 80 69 62 6 8 110 4 0.10 26 4 41 6 28 22 6 1 44 42 40 8 67 6 49 44 44 4 71 9 1 4 4 47 72 62 47 47 48 74 64 6 49 0 2 260 121 0.29 72 6 8 4 1 1 46 71 62 7 6 2 77 67 62 7 9 8 78 70 66 9 60 60 79 72 68 61 61 61 82 7 72 6 6 64 2100 991 0 46 9 2 48 46 4 7 71 60 4 1 48 74 6 9 2 7 68 64 7 7 76 70 66 9 8 7 78 7 69 62 61 60 10 71 0.10 26 4 46 41 8 1 24 64 0 47 46 41 68 61 7 0 0 47 72 6 61 4 2 1 74 67 6 6 4 4 76 70 66 8 7 7 1000 472 0.04 11 2 8 0 2 - - 9 1 47 40 7 6 8 46 4 4 69 61 6 49 47 48 69 62 8 0 49 0 71 6 62 2 2 4 72 178 0. 12 77 6 8 9 67 6 * * * * * * 81 70 6 9 66 64 84 74 70 61 66 67 87 76 7 62 66 67 87 79 72 64 6 67 2800 121 0.0 7 6 49 49 0 4 68 8 4 4 0 74 64 9 7 77 68 6 8 8 79 70 6 6 9 60 80 7 67 8 60 62 1800 849 0.1 1 4 40 9 2 62 4 48 4 4 40 67 8 47 48 46 70 62 6 49 0 0 71 64 7 0 2 7 67 61 2 7 800 78 0.0 6 49 - - - - 44 9 1 2 4 7 49 44 6 9 41 60 49 41 4 47 61 4 1 4 47 0 6 7 4 48 0 4 42 201 0.01 2 2 8 - - - - 4 41 7 28 1 2 4 44 42 6 40 40 4 4 41 4 47 4 47 46 42 48 1 6 49 48 44 1 8000 77 0.4 107 79 67 74 71 78 71 84 7 70 66 72 69 8 79 76 71 7 76 90 82 79 76 80 77 9 8 81 79 80 82 9 88 8 81 8 8 7000 0 0.1 78 7 66 6 9 62 60 82 72 69 64 70 67 8 77 74 69 7 74 88 81 78 76 78 76 91 82 80 77 78 80 92 84 82 79 81 8 0 22 0.01 2 70 62 60 7 6 79 71 68 62 68 66 82 7 72 67 71 72 87 80 77 72 74 7 89 81 79 7 76 78 90 82 81 77 79 81 00 201 0.01 2 69 61 60 6 6 78 70 67 62 66 64 82 7 71 66 70 70 86 79 76 71 7 74 87 80 78 7 74 76 89 8 81 76 78 80 800 179 0.01 2 60 2 1 47 46 46 69 61 8 4 6 4 7 66 62 8 60 60 76 69 66 61 6 64 77 70 68 6 64 66 79 7 71 66 68 70 For performance table notes, see page 9; highlighted numbers indicate embedded RI certification points. 7

0Q SERIES Performance Data Radiated Sound Power Levels 0Q Series ospital Grade Dissipative Silencer Terminal: Steri-Liner Silencer: Mylar, Spacer, Steri-Liner (MSSL) Media Inlet 4 6 7 8 9 10 12 14 16 24 x 16 irflow Min. inlet Sound Power Octave Bands @ Inlet Pressure ( Ps) shown Ps Minimum Ps 0." w.g. (12Pa) Ps 1.0" w.g. (20Pa) Ps 1." w.g. (7Pa) Ps 2.0" w.g. (00Pa) Ps.0" w.g. (70Pa) Ps cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 2 4 6 7 200 94 0.40 99-6 2 - - - 9 7 8 29 29 49 46 4 7 0 29 2 47 40 2 1 0 42 4 47 7 7 10 71 0.24 60-29 1 - - - 40 6 0 2 2 47 46 40 4 28 26 49 0 47 9 1 0 47 48 48 4 4 2 48 48 48 0 40 7 100 47 0.12 0 - - - - - - - 7 2 27 - - - 4 42 4 27 2-44 4 41 2 29-4 46 46 6 2-42 44 1 4 8 0 24 0.0 7 - - - - - - - 7 8 0 - - - 6 41 40 2 27-40 4 8 1-4 8 40 8-2 6 7 7 0 16 0.17 41 48 9 2 0 27 2 4 9 8 7 2 48 4 8 6 2 9 1 49 40 9 4 61 4 1 42 40 6 61 7 4 44 40 20 118 0.08 20-1 2 2-0 40 6 2 0 2 4 4 42 2 28 48 4 0 6 1 48 7 7 2 7 1 42 41 10 71 0.0 7 - - - - - - 49 1 2 20-0 41 9 0 29 21 0 4 4 4 27 48 4 4 40 9 1 1 4 46 46 44 7 100 47 0.01 2 - - - - - - - 29 - - - - 9 8 28 26 - - 40 42 6 4 26 46 40 4 4 41 1 47 41 4 47 46 7 00 26 0.10 24 48 44 8 6 0 28 49 48 42 40 0 7 2 46 41 2 60 4 49 4 6 4 62 7 1 4 40 8 6 9 47 4 42 400 189 0.06 1-42 28 26 49 46 9 0 28 6 49 44 8 2 29 9 2 47 40 6 62 4 49 42 9 6 64 8 4 4 42 41 00 142 0.0 8-4 27 26 - - 47 42 29 2-46 40 0 28 8 49 44 6 2 9 1 47 8 6 4 60 1 4 9 9 200 94 0.01 4 - - - - - - 47 6 0 24 - - 4 8 0 29 28 4 4 2 1 0 47 44 6 2 2 49 46 4 7 7 700 0 0.09 2 49 46 48 7 2 49 48 4 7 1 0 6 1 47 40 4 1 62 7 2 4 7 4 66 60 48 40 7 68 64 60 2 44 42 0 260 0.06 16 48 4 41 27 2 48 44 40 2 28 26 49 4 8 2 0 61 4 49 4 6 64 8 2 4 8 6 6 61 7 0 42 40 400 189 0.04 9 46 9 - - 46 4 8 0 26 20 48 4 7 1 29 7 1 46 41 4 2 9 49 44 6 4 60 6 2 47 40 40 20 118 0.02 4 - - 20 1 - - - 9 4 28 21-1 46 41 29 27 4 47 4 8 1 0 48 44 40 2 49 46 4 7 8 1100 19 0.18 4 2 0 4 7 4 7 1 46 7 2 60 4 1 40 8 6 7 4 42 6 67 60 6 4 44 9 70 6 60 49 48 42 900 42 0.1 2 1 47 40 4 1 29 6 0 4 7 4 1 8 49 9 7 6 6 1 42 42 6 6 8 4 44 44 9 68 60 6 47 48 42 700 0 0.08 21 0 4 7 1 29 2 1 47 42 1 28 7 1 47 7 6 2 61 0 40 9 6 1 42 41 7 64 9 6 4 44 40 00 26 0.0 11-8 0 27 24-0 44 9 1 29 2 48 44 4 1 8 1 47 7 7 9 49 9 9 6 61 2 4 4 40 1400 661 0.16 9 1 46 46 44 7 2 47 46 41 8 7 49 42 7 64 8 47 41 7 66 6 7 0 4 40 69 67 61 4 47 44 110 4 0.11 27 0 4 44 41 4 4 1 46 4 40 6 6 2 47 41 6 4 62 6 1 4 9 7 64 61 49 42 9 67 64 9 2 46 4 900 42 0.07 17 48 40 9 6 0 29 0 4 42 7 2 0 6 0 4 40 60 4 49 44 9 6 6 8 2 47 41 8 64 61 6 0 44 42 60 07 0.04 10 47 6 1 28 21-49 41 6 1 28 2 4 48 42 7 2 0 7 1 46 41 9 4 49 44 8 6 60 7 2 47 41 9 100 708 0.2 61 4 4 4 8 4 26 6 48 46 9 0 8 0 44 8 4 62 7 48 42 8 64 9 0 4 41 66 64 9 4 48 4 1100 19 0.14 4 1 7 0 2-46 42 1 27 0 47 41 1 60 4 0 4 9 6 61 6 1 47 42 9 64 61 1 4 4 700 0 0.06 14-0 2 21 - - 48 42 7 1 27 24 47 42 7 29 6 0 4 41 6 8 1 47 4 8 6 9 0 48 41 40 200 94 0.01 2 - - - - - - - 2 24 22 - - - 6 29 27 2 - - 7 2 0 28 28-8 29 29 4 40 7 7 200 1180 0.44 110 7 4 0 42 6 60 7 46 41 8 6 61 4 0 42 9 66 6 7 4 41 67 64 9 48 44 70 69 6 9 2 0 200 967 0.1 76 0 48 44 7 8 1 46 9 61 9 49 42 7 64 61 6 2 4 41 6 62 8 48 44 68 67 61 8 1 49 1600 7 0 48 2 4 41 6 0 27 6 2 4 40 4 0 9 6 49 46 8 61 8 49 42 9 62 60 1 44 42 6 64 8 48 46 110 4 0.10 26 47 8 1 27 2-2 48 40 6 0 26 2 4 41 4 2 8 49 4 8 6 9 7 1 48 41 9 61 60 2 4 44 260 121 0.29 72 7 0 46 42 8 6 49 44 40 62 60 48 4 9 64 6 6 0 47 44 6 66 9 2 49 47 69 69 6 7 2 0 2100 991 0 46 4 48 44 9 0 6 46 41 7 1 60 7 0 44 41 8 6 61 48 44 4 64 6 7 0 46 4 66 66 60 0 48 10 71 0.10 26 46 40 0 26-1 48 42 1 27 7 48 40 6 60 8 2 4 40 9 60 60 47 4 41 62 6 7 2 47 4 1000 472 0.04 11 - - - - - - 48 4 7 1 28 24 2 1 4 7 1 4 46 41 7 6 49 44 40 8 6 7 2 48 4 42 72 178 0. 12 8 8 1 4 8 * * * * * * 64 62 7 48 9 67 66 60 6 0 4 69 69 62 7 1 49 71 72 6 9 49 2800 121 0.0 7 4 1 49 4 7 2 9 0 44 8 2 62 9 47 41 6 6 7 0 44 9 66 6 9 2 46 41 68 69 62 6 0 46 1800 849 0.1 1 47 40 7 0 24-2 49 42 6 2 27 7 49 41 6 2 9 9 2 44 9 61 61 4 48 42 8 62 64 7 2 46 4 700 0 0.0 6 - - - - - - - 40 28 2-47 47 9 2 29 49 49 42 7 0 1 44 9 7 6 1 46 4 41 41 42 201 0.01 2 - - - - - - - 2 - - - 42 42 26 27 26 4 44 6 1 0 29 44 46 9 2 2 44 47 40 8 6 8 8000 000 0.4 107 77 6 66 60 9 4 7 69 67 61 9 4 76 7 72 66 6 7 78 7 74 69 6 9 80 77 76 71 66 60 82 79 79 74 69 62 7000 0 0.1 78 67 64 6 9 7 71 68 66 60 8 7 72 71 6 62 6 77 74 7 68 64 8 79 76 7 70 6 9 81 78 78 7 68 61 0 22 0.01 2 6 7 7 2 2 47 67 64 6 7 4 49 70 68 68 62 8 72 70 70 6 60 74 72 72 68 62 6 76 74 7 71 64 8 00 1988 0.01 2 62 6 6 1 1 46 66 6 62 6 48 69 67 67 61 7 2 71 69 69 64 9 4 7 71 71 67 61 7 7 74 70 6 7 800 142 0.01 2 61 2 0 46 4 40 62 60 60 4 0 4 66 64 64 9 4 49 68 66 67 62 6 1 69 68 69 64 8 2 72 70 71 67 60 4 For performance table notes, see page 9; highlighted numbers indicate embedded RI certification points. 8

0Q SERIES Performance Data RI Certification and Performance Notes 0Q Series ospital Grade Dissipative Silencer RI Certification Points Terminal: Steri-Liner Silencer: Mylar, Spacer, Steri-Liner (MSSL) Media Min. Inlet Discharge Sound Power Levels @ 1." w.g. (7 Pa) Ps Performance Notes for Sound Power Levels: 1. Discharge sound power is the noise emitted from the unit discharge into the downstream duct. Discharge Sound Power Levels (SL) now include duct end reflection energy as part of the standard rating. Including the duct end correction provides sound power levels that would normally be transmitted into an acoustically, non-reflective duct. The effect of including the energy correction to the discharge SL, is higher sound power levels when compared to previous RI certified data. For more information on duct end reflection calculations see RI Standard 880. 2. Radiated sound power is the breakout noise transmitted through the unit casing walls.. Sound power levels are in decibels, db re 10-12 watts. Radiated Sound Power Levels @ 1." w.g. (7 Pa) Ps Inlet irflow Ps Octave Band Octave Band cfm l/s "w.g. Pa 2 4 6 7 2 4 6 7 4 10 71 0.24 60 6 60 48 29 7 49 0 47 9 1 0 20 118 0.08 20 67 62 49 0 8 48 4 0 6 400 189 0.06 1 71 67 8 1 7 41 9 2 47 40 6 7 0 260 0.06 16 74 67 9 48 6 4 61 4 49 4 6 8 700 0 0.08 21 77 67 8 48 9 47 61 0 40 9 9 900 42 0.07 17 7 6 7 48 44 48 60 4 49 44 9 6 10 1100 19 0.14 4 77 6 7 0 49 0 60 4 0 4 9 6 12 1600 7 0 48 76 64 8 2 4 61 8 49 42 9 14 2100 991 0 46 7 68 64 7 7 6 61 48 44 4 16 2800 121 0.0 7 77 68 6 8 8 6 6 7 0 44 9 24 x 16 0 22 0.01 2 87 80 77 72 74 7 72 70 70 6 60 Ratings are certified in accordance with RI Standards. 4. ll sound data listed by octave bands is raw data without any corrections for room absorption or duct attenuation. Dash (-) in space indicates sound power level is less than 20 db or equal to background.. Minimum inlet Ps is the minimum operating pressure requirement of the unit (damper full open) and the difference in static pressure from inlet to discharge of the unit. 6. sterisk (*) in space indicates that the minimum inlet static pressure requirement is greater than 0." w.g. (12 Pa) at rated airflow. 7. Data derived from independent tests conducted in accordance with NSI/SRE Standard 10 and RI Standard 880. 9

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB 4.4 1.8 1.2 11 2.6 2.1 1. 0.9 9 7 k MB 9.4 2 8. 29 7.6 26 6.7 2 1 Row (single circuit) 0 100 10 200 20 00 0 400 40 00 CFM 24 47 71 94 118 142 16 189 212 26 l/s Unit s 4, and 6 GPM l/s 2.1 1..09 1.06 0..0 k MB 7. 2 6.4 22.6 19.6 16 4.7 1.8 10 2 Row (multi-circuit) 0 100 10 200 20 00 0 400 40 00 CFM 24 47 71 94 118 142 16 189 212 26 l/s Row (multi-circuit) 4 Row (multi-circuit) GPM l/s 2 1..09 1.1.06 2.9 1.2 7 4 k MB 11.1 8 10. 9.4 2 8. 29 7.6 26 GPM l/s 2.1 1..09 1.06 0..0 GPM l/s 2 1..09 1.1.06.9 20 6.7 2.0 4.1 17 14 0..0.9.0 20 17 0..0.2 11 4.1.2 14 11 2. 8 2. 8 1. 0 100 10 200 20 00 0 400 40 00 CFM 24 47 71 94 118 142 16 189 212 26 l/s 1. 0 100 10 200 20 00 0 400 40 00 CFM 24 47 71 94 118 142 16 189 212 26 l/s 40 NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4)

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q Unit s 7 and 8 k MB 7. 2 6.7 2 6.2 21.6 19.0 17 4.4 1.8 1.2 11 2.6 2.1 9 k MB 16.7 7 1. 14.4 49 1.2 4 12.0 41 10.8 7 9.7 8. 29 7. 2 6.2 21.0 17 1 Row (single circuit) GPM l/s 4 2.1 1..09 1 0..0 7 200 00 400 00 600 700 800 900 1000 CFM 94 142 189 26 28 0 78 42 472 l/s.2.2.06 k MB 12.9 44 12.0 41 11.1 8 10. 9.4 2 8. 29 7.6 26 6.7 2.9 20.0 17 4.1 14 2 Row (multi-circuit) Row (multi-circuit) 4 Row (multi-circuit) GPM l/s.2 4.2 2 1..09 1.1.06 0..0.2 k MB 19.6 67 18. 6 17. 9 16.1 14.9 1 1.8 47 12.6 4 11.4 9 10. 9.1 1 7.9 27 6.7 2.6 19 GPM l/s 4 2 1..09 1 0..0 11 200 00 400 00 600 700 800 900 1000 CFM 94 142 189 26 28 0 78 42 472 l/s.2.2.1.06 GPM l/s.2 4.2 2 1..09 1.1.06 0..0.8 1 200 00 400 00 600 700 800 900 1000 CFM 94 142 189 26 28 0 78 42 472 l/s 4.4 1 200 00 400 00 600 700 800 900 1000 CFM 94 142 189 26 28 0 78 42 472 l/s NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4) 41

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB GPM l/s 9.4 2 7..47.2 8. 29 7.6 26 6.7 2.9 20.0 17 4.1 14.2 11 2. 1 Row (single circuit) Unit s 9 and 10 2 1 0..0 8 00 400 00 600 700 800 900 1000 1100 1200 100 1400 CFM 142 189 26 28 0 78 42 472 19 66 61 661 l/s.1.09 2 Row (multi-circuit) k MB GPM l/s 17.0 8 7..47 1.8 4.2 14.7 0 1. 46 12. 42 11.1 8 10.0 4 8.8 0 7.6 26 6.4 22. 18 Row (multi-circuit) 4 Row (multi-circuit) k MB GPM l/s 22. 76 7..47 20.8 71.2 19. 66 17.9 61 16.4 6 14.9 1 1. 46 12.0 41 10. 6 9.1 1 7.6 26 6.2 21 4.7 2 1 0..0 16 00 400 00 600 700 800 900 1000 1100 1200 100 1400 CFM 142 189 26 28 0 78 42 472 19 66 61 661 l/s.1.09 4.1 2 1 0..0 14 00 400 00 600 700 800 900 1000 1100 1200 100 1400 CFM 142 189 26 28 0 78 42 472 19 66 61 661 l/s k MB GPM l/s 26.4 90 7..47 24.9 2.4 22.0 20. 19.0 17.6 16.1 14.7 1.2 11.7 10. 8.8 8 80 7 70 6 60 0 4 40 0 2 1.2.1.09 7..9 2 20 0..0 00 400 00 600 700 800 900 1000 1100 1200 100 1400 CFM 142 189 26 28 0 78 42 472 19 66 61 661 l/s.1.09 42 NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4)

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB GPM l/s 12.9 44 10.6 7..47.2 11.7 40 10. 6 9.4 2 8.2 28 7.0 24.9 20 4.7 16 1 Row (single circuit). 12 400 0 700 80 1000 110 100 140 1600 170 1900 200 2200 CFM 189 260 0 401 472 4 61 684 7 826 897 967 108 l/s Unit 12 2 1.1.09 2 Row (multi-circuit) k MB GPM l/s 24.0 82 10.6 7..47 22.6 77 21.1 72.2 19.6 67 18.2 62 16.7 7 1.2 2 1.8 47 12. 42 10.8 7 9.4 2 7.9 27 6.4 22 400 0 700 80 1000 110 100 140 1600 170 1900 200 2200 CFM 189 260 0 401 472 4 61 684 7 826 897 967 108 l/s Row (multi-circuit) 4 Row (multi-circuit) k MB GPM l/s 2.2 110 10.6 7..47 0.2 10 28.1 96.2 26.1 24.0 22.0 19.9 17.9 1.8 1.8 11.7 9.7 89 82 7 68 61 4 47 40 2 1.1.09 k MB GPM l/s 8.1 10 10.6 7..47.2 120 2.2 110.2 29. 100 26.4 90 2.4 80 20. 70 17.6 60 14.7 0 11.7 40 8.8 0 2 1 2 1.1.09.1.09 7.6 26 400 0 700 80 1000 110 100 140 1600 170 1900 200 2200 CFM 189 260 0 401 472 4 61 684 7 826 897 967 108 l/s.9 20 400 0 700 80 1000 110 100 140 1600 170 1900 200 2200 CFM 189 260 0 401 472 4 61 684 7 826 897 967 108 l/s NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4) 4

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB GPM l/s 16.7 7 10.6 7..47 1..2 14.4 49 1.2 4 12.0 41 10.8 7 9.7 8. 29 7. 2 6.2 21 1 Row (single circuit).0 17 00 700 900 1100 100 100 1700 1900 2100 200 200 2700 CFM 26 0 42 19 61 708 802 897 991 108 1180 1274 l/s Unit 14 2 1.1.09 2 Row (multi-circuit) k MB GPM l/s 0.2 10 10.6 28.7 98 7..47 27.2 2.8 24. 22.9 21.4 19.9 18. 17.0 1. 9 88 8 78 7 68 6 8 2.2.1 14.1 48 12.6 4 1.09 11.1 9.7 8.2 8 28 00 700 900 1100 100 100 1700 1900 2100 200 200 2700 CFM 26 0 42 19 61 708 802 897 991 108 1180 1274 l/s Row (multi-circuit) 4 Row (multi-circuit) k MB GPM l/s 40.1 17 10.6 7.8 129 7..47. 121.1 11 0.8 10 28.4 26.1 2.7 21.4 19.0 16.7 14.4 12.0 97 89 81 7 6 7 49 41 9.7 00 700 900 1100 100 100 1700 1900 2100 200 200 2700 CFM 26 0 42 19 61 708 802 897 991 108 1180 1274 l/s 2 1.2.1.09 k MB GPM l/s 47.2 161 10.6 44. 12 7..47 41.9 14 9. 14 6.6 12 4.0 116 1.4 107.2 28.7 26.1 2.4 20.8 18.2 1. 12.9 10. 98 89 80 71 62 44 2 1.1.09 00 700 900 1100 100 100 1700 1900 2100 200 200 2700 CFM 26 0 42 19 61 708 802 897 991 108 1180 1274 l/s 44 NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4)

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB GPM l/s 19.9 68 10.6 7..47 18.2 16.4 14.7 12.9 11.1 9.4 7.6 62 6 0 44 8 2 26 1 Row (single circuit).9 20 700 90 1200 140 1700 190 2200 240 2700 290 200 40 700 CFM 0 448 66 684 802 920 108 116 1274 192 110 1628 1746 l/s Unit 16 2 1.2.1.09 2 Row (multi-circuit) k MB GPM l/s 6.6 12 10.6 4. 117 7..47 1.9 109 29.6 101 Row (multi-circuit) 4 Row (multi-circuit) k MB GPM l/s 48. 16 10.6 4.4 1 7..47 42. 14 9.6 1 6.6 12.7 11 0.8 10 27.8 24.9 22.0 19.0 16.1 1.2 9 8 7 6 4 10. 700 90 1200 140 1700 190 2200 240 2700 290 200 40 700 CFM 0 448 66 684 802 920 108 116 1274 192 110 1628 1746 l/s 2 1.2.1.09 27.2 24.9 22.6 20.2 17.9 1. 1.2 10.8 9 8 77 69 61 4 7 8. 29 700 90 1200 140 1700 190 2200 240 2700 290 200 40 700 CFM 0 448 66 684 802 920 108 116 1274 192 110 1628 1746 l/s k MB GPM l/s 6. 19 10.6.6 18 7..47 0.7 17 47.8 16 44.8 1 41.9 14 9.0 1 6.0 12.1 11 0.2 10.2 27.2 24. 21.4 18. 1. 12.6 9 8 7 6 4 2 1.1.09 700 90 1200 140 1700 190 2200 240 2700 290 200 40 700 CFM 0 448 66 684 802 920 108 116 1274 192 110 1628 1746 l/s 2 1.2.1.09 NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4) 4

000 SERIES Performance Data ot ater Coil Models: 0R, 0RQ and 0Q k MB GPM l/s 9.6 1 1.9 6.6 12 10.6 7..47.7 11.2 0.8 10 27.8 24.9 22.0 19.0 16.1 1.2 9 8 7 6 4 1 Row (single circuit) 10. 1000 1700 2400 100 800 400 200 900 6600 700 8000 CFM 472 802 11 146 179 2124 244 2784 11 44 77 l/s Unit 24 x 16 1.09 2 Row (multi-circuit) k MB GPM l/s 11 240 1.9 109 20 104 220 10.6 99 210 7..47 94 200 90 190 8 180 80 170 76 160 71 10 66 140 61 10 7 120 2 110 47 100.2 42 8 28 21 19 90 80 70 60 0 40 1.09 1000 1700 2400 100 800 400 200 900 6600 700 8000 CFM 472 802 11 146 179 2124 244 2784 11 44 77 l/s Row (multi-circuit) 4 Row (multi-circuit) k MB GPM l/s 9.8 20 1.9 87.9 00 82.0 280 76.2 260 10.6 7..47 70. 240 64. 220 8.6 200 2.7 180 46.9 160 41.0 140.2 120 29. 100.2 2.4 17.6 11.7 80 60 40 1.09 1000 1700 2400 100 800 400 200 900 6600 700 8000 CFM 472 802 11 146 179 2124 244 2784 11 44 77 l/s k MB GPM l/s 108.4 70 1.9 102.6 0 96.7 0 90.8 10 10.6 8.0 290 7..47 79.1 270 7. 20 67.4 20 61. 210.7 190 49.8 170 44.0 10 8.1 10 2.2 110.2 26.4 90 20. 70 14.7 0 1.09 1000 1700 2400 100 800 400 200 900 6600 700 8000 CFM 472 802 11 146 179 2124 244 2784 11 44 77 l/s 46 NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below. Correction factors at other entering conditions:. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. ltitude Correction Factors: ltitude ft. (m) 0 (0) 2000 (610) 000 (914) 4000 (1219) 000 (124) 6000 (1829) 7000 (214) Sensible eat Factor 1.00 0.94 0.90 0.87 0.84 0.81 0.78 t F ( C) 40 (22) 0 (28) 60 () 70 (9) 80 (44) 90 (0) 100 (6) 110 (61) 12 (69) 140 (78) 160 (89) 180 (100) Factor.20 ().400 (.406).480 (.478).60 (.6).640 (.68).720 (.72).800 (.812).880 (.884) 1.00 (1.00) 1.12 (1.1) 1.28 (1.29) 1.44 (1.4)

000 SERIES Performance Data ot ater Coil Pressure Drop Models: 0R, 0RQ and 0Q kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 ater Pressure Drop Unit s 4, & 6 Unit s 7 & 8 Pa in. w.g. 249 1.00 199 0.80 149 0.60 ir Pressure Drop kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 ater Pressure Drop Pa in. w.g. 249 1.00 199 0.80 149 0.60 ir Pressure Drop ED LOSS (TER PRESSURE DROP) 11.9 6.0.0 2.4 1.8 1.2 0.6 0. 1 RO 4.0 2 RO 2.0 RO 4 RO 1.0 0.8 0.6 0.4 0.2 IR PRESSURE DROP 100 0.40 0 0.20 2 0.10 20 0.08 1 0.06 10 0.04 0.02 0.1 2 0.01 1 2 4 6 8 10 GPM.06.1.2.8.0.6 l/s TER FLO 11.9 4.0 4 RO 1 RO RO 2 RO ED LOSS (TER PRESSURE DROP) 2 RO 6.0 2.0 RO.0 1.0 4 RO 2.4 0.8 1.8 0.6 1 RO 1 RO 1.2 0.4 10 0.04 0.6 0.2 0.02 0. 0.1 2 0.01 100 200 00 00 CFM 1 2 4 6 8 10 GPM 100 200 400 600 1000 CFM 47 94 142 26 l/s.06.1.2.8.0.6 l/s 47 94 189 28 472 l/s IRFLO TER FLO IRFLO IR PRESSURE DROP 100 0.40 4 RO RO 0 0.20 2 RO 2 0.10 20 0.08 1 0.06 ED LOSS (TER PRESSURE DROP) kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 11.9 6.0.0 2.4 1.8 1.2 0.6 4.0 2.0 1.0 0.8 0.6 0.4 0.2 ater Pressure Drop 1 RO 2 RO RO Unit s 9 & 10 Unit 12 Pa in. w.g. 2486 10.0 1989 8.0 1492 6.0 994 4.0 IR PRESSURE DROP 497 249 199 149 2.0 1.0 0.8 0.6 ir Pressure Drop 4 RO 99 0.4 4 RO RO 0 0.2 2 RO 2 0.1 1 RO 20 0.08 1 0.06 10 0.04 0.02 ED LOSS (TER PRESSURE DROP) kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 11.9 6.0 4.0 2.0.0 1.0 2.4 0.8 1.8 0.6 1.2 0.6 0.4 0.2 ater Pressure Drop 1 RO 2 RO RO 4 RO Pa in. w.g. 2486 10.0 1989 8.0 1492 6.0 994 4.0 IR PRESSURE DROP 497 249 199 149 99 0 2.0 1.0 0.8 0.6 0.4 0.2 2 0.1 20 0.08 1 0.06 10 0.04 0.02 ir Pressure Drop 4 RO RO 2 RO 1 RO 0. 0.1 1 2 4 6 8 10 GPM.06.1.2.8.0.6 l/s TER FLO 2 0.01 100 200 400 600 1000 2000 CFM 47 94 189 28 472 944 l/s IRFLO 0. 0.1 1 2 4 6 8 10 GPM.06.1.2.8.0.6 l/s TER FLO 2 0.01 100 200 400 600 1000 000 CFM 47 94 189 28 472 1416 l/s IRFLO NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below.. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. 47

000 SERIES Performance Data ot ater Coil Pressure Drop Models: 0R, 0RQ and 0Q ED LOSS (TER PRESSURE DROP) kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 11.9 6.0 4.0 2.0.0 1.0 2.4 0.8 1.8 0.6 1.2 0.6 0.4 0.2 ater Pressure Drop 1 RO 2 RO RO 4 RO 0. 0.1 1 2 4 6 8 10 GPM.06.1.2.8.0.6 l/s TER FLO Unit 14 Unit 16 Pa in. w.g. 2486 10.0 1989 8.0 1492 6.0 994 4.0 IR PRESSURE DROP 497 2.0 249 199 149 1.0 0.8 0.6 99 0.4 0 0.2 2 0.1 20 0.08 1 0.06 10 0.04 0.02 2 0.01 ir Pressure Drop 4 RO 2 RO 1 RO RO ED LOSS (TER PRESSURE DROP) 100 200 400 600 1000 000 CFM 47 94 189 28 472 1416 l/s IRFLO kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 11.9 6.0.0 2.4 1.8 1.2 0.6 0. 4.0 2.0 1.0 0.8 0.6 0.4 0.2 0.1 ater Pressure Drop 1 RO 2 RO RO 4 RO IR PRESSURE DROP 1 2 4 6 8 10 GPM.06.1.2.8.0.6 l/s TER FLO Pa in. w.g. 2486 10.0 1989 8.0 1492 6.0 994 4.0 497 249 199 149 99 0 2.0 1.0 0.8 0.6 0.4 0.2 2 0.1 20 0.08 1 0.06 10 0.04 0.02 2 0.01 ir Pressure Drop 4 RO RO 2 RO 1 RO 100 200 400 6001000 2000 4000 CFM 47 94 189 28 472 944 1888 l/s IRFLO ED LOSS (TER PRESSURE DROP) kpa ft. 2 O 29.8 10.0 2.9 8.0 17.9 6.0 11.9 6.0.0 2.4 1.8 1.2 0.6 4.0 2.0 1.0 0.8 0.6 0.4 0.2 ater Pressure Drop 1 RO 2 RO RO 4 RO Unit 24 x 16 Pa in. w.g. 2486 10.0 1989 8.0 1492 6.0 994 4.0 IR PRESSURE DROP 497 249 199 149 99 0 2.0 1.0 0.8 0.6 0.4 0.2 2 0.1 20 0.08 1 0.06 10 0.04 0.02 ir Pressure Drop 4 RO RO 2 RO 1 RO 0. 0.1 1 2 4 6 8 10 20 GPM.06.1.2.8.0.6 1.26 l/s TER FLO 2 0.01 100 200 400600100020004000 8000 CFM 47 94 18928472 944 1888 77 l/s IRFLO NOTES: 1. Capacities are in MB (k), thousands of Btu per hour (kiloatts). 2. MB (k) values are based on a t (temperature difference) of 12 F (69 C) between entering air and entering water. For other t's; multiply the MB (k) values by the factors below.. ir Temperature Rise. TR ( F) = 927 x MB, TR ( C) = 829 x k cfm l/s 4. ater Temp. Drop. TD ( F) = 2.04 x MB, TD ( C) =.224 x k GPM l/s. Connections: 1 Row, 2, and 4 Row 7/8" (22); O.D. male solder. 48

000 SERIES Electric eating Coils Selection, Capacities and Features Models: 0RE, 0REQ and 0QE Nailor manufactures its own electric heating coils. They have been specifically designed and tested for use with variable air volume single duct terminal units. ll terminals with electric heat have been tested and ETL listed as an assembly, eliminating the need to mount coils a minimum of 6" (914) downstream or having to ship a bulky length of ductwork when coils are to be supplied mounted on the terminal. Nailor electric coils are factory mounted as an integral part of the terminal unit in an insulated extended plenum section. Total length of the casing including heater terminal is only 1" (787), providing a compact, easy to handle unit. The unique inclined opposed blade damper design provides improved and more even airflow over the coil elements compared with round butterfly damper designs, which helps to minimize air stratification, avoid nuisance tripping of the thermal cut-outs and maximize heat transfer. Selection Guidelines: The table below provides a general guideline as to the voltages and maximum kiloatts available for each terminal unit size. Up to three stages of heat are available. minimum of 0. k/ stage is required. For optimum diffuser performance and maximum thermal comfort, SRE recommends that discharge temperatures do not exceed 1 F (8 C) above room set point, as stratification and short circuiting may occur. SRE Standard 62.1 limits discharge temperatures to 90 F (2 C) or increasing the Model 0RE ventilation rate when heating from the ceiling. Never select k to exceed a discharge temperatures of 11 F (46 C). T (ir Temp. Rise, F) = k x 160 cfm The coil ranges listed are restricted to a maximum of 48 amps and do not require circuit fusing to meet NEC code requirements. Total pressure at the airflow switch should be at least 0.07" w.g. (17 Pa) to ensure correct coil operation and avoid possible nuisance tripping of the thermal cutouts due to insufficient airflow over the coil elements. Electric Coil Limitations Unit 4 6 7 8 9 10 12 14 16 24 x 16 eating Range* cfm (l/s) 2 22 (12 106) 4 400 (21 189) 6 0 (1 260) 9 800 (4 78) 12 1100 (9 19) 16 1400 (78 661) 21 1840 (101 868) 290 200 (17 1180) 60 12 (170 147) 40 72 (20 178) 960 80 (4 91) Maximum k Single Phase Three Phase 120V 208V 240V 277V 47V 208V 480V 600V.0.0..........0.0 7. 9. 9. 9. 9. 9. 9. 9. 9. * Minimum required airflow must be the greater of the air volume listed or 70 cfm per kilowatt ( L/s/k).0.0 7. 9. 11.0 11.0 11.0 11.0 11.0 11.0 11.0.0.0 7. 9. 1.0 1.0 1.0 1.0 1.0 1.0 1.0.0.0 7. 9. 1.0 16.0 16. 16. 16. 16. 16..0.0 7. 9. 1.0 16.0 17.0 17.0 17.0 17.0 17.0.0.0 7. 9. 1.0 16.0 21.0 0.0 1.0 1.0 1.0.0.0 7. 9. 1.0 16.0 21.0 0.0 8. 8. 8. Tested and approved to the following standards: NSI/UL 1996, 4 th ed. CS C22.2 No. 1-M1986. Standard Features: Primary auto-reset high limit thermal cut-out. Secondary manual reset high limit thermal cut-outs (one per element). Positive pressure airflow switch. Derated high quality nickel-chrome alloy heating elements. Magnetic or safety contactors and/or PE switches as required. Control transformer. Class II, 24 Vac for digital and analog controls. Line terminal block. ETL Listed as an assembly. inged door control enclosure. igh performance arrowhead insulators. Slip and drive discharge connection. Class 80/20 wire. Options: Quiet contactors. Mercury contactors. Toggle type disconnect switch. Door interlock disconnect switch. Power circuit fusing. Dust tight construction. SCR control. 49