EX-6 series A Distance between tumblers 6 660 mm B Undercarriage length 8 700 mm C Counterweight clearance 2 440 mm D Rear-end swing radius 6 780 mm D Rear-end length 6 60 mm E Overall width of upperstructure 9 420 mm F Overall height of cab 7 830 mm G Minimum ground clearance 90 mm H Track gauge 00 mm I Track shoe width 1 270 mm J Undercarriage width 6 770 mm K Track height 2 30 mm Illustrations show diesel engine type. HYDRAULIC EXCAVATOR EX3600-6 with Diesel Engine Engine Gross Power : 1 40 kw (1 944 HP) Operating Weight : Loading Shovel : 362 000 kg Backhoe: 39 000 kg EX3600E-6 with Electric Motor Power Output : 1 200 kw Operating Weight : Loading Shovel : 33 000 kg Bucket Capacity Loading Shovel Bucket : Heaped : 21.0 m 3-23.0 m 3 Backhoe Bucket : SAE, PCSA Heaped : 22.0 m 3 CECE Heaped : 19.2 m 3
SPECIFICATIONS EX3600-6 ENGINE Model... Cummins QSKTA60-CE Type... Wa t e r- c o o l e d, 4 - c y c l e, -cylinder, turbo-charged a n d a f t e r- c o o l e d, d i re c t injection chamber-type diesel engine Rated power SAE J199, gross... 1 40 kw (1 944 HP) at 1 800 min -1 (rpm) Net... 1 40 kw (1 944 HP) at 1 800 min -1 (rpm) Maximum torque... 8 364 N m at 1 00 min -1 (rpm) Piston displacement... 60.0 L Bore and stroke... 19 mm x 190 mm Starting system... 24 V electric motor Batteries... 4 x 12 V, 4 x 220 AH Cold starting... Ether aided HYDRAULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine-speed sensing control system. OHS (Optimum Hydraulic System) 8 main pumps and 4 valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-idling system for saving fuel and reducing noise Hydraulic drive cooling-fan system for oil cooler and radiator. Forced-lubrication and forced-cooling pump drive system Main pumps... 8 variable-displacement,axial piston pumps for front attachment,travel and swing Pressure setting... 29.4 MPa (300 kgf/cm 2 ) Max.oil flow... 8 x 00 L/min Pilot pump... 1 gear pump Pressure setting... 4.4 MPa (4 kgf/cm 2 ) Max.oil flow... 0 L/min Relief Valve Settings Implement circuit... 29.4 MPa (300kgf/cm 2 ) Swing circuit... 29.4 MPa (300kgf/cm 2 ) Travel circuit... 29.4 MPa (300kgf/cm 2 ) Pilot circuit... 4.4 MPa (4kgf/cm 2 ) Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 2 360 mm 260 mm Arm 1 300 mm 220 mm Bucket 2 280 mm 200 mm Dump 2 22 mm 130 mm Level 1 360 mm 260 mm Backhoe Quan. Bore Rod diameter Boom 2 360 mm 260 mm Arm 2 300 mm 220 mm Bucket 2 20 mm 180 mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter 10 mm High pressure strainer 8 80 meshes (In main & swing pump delivery line) Drain filter 1 10 mm (For all plunger type pumps & motors) By-pass filter 1 mm (In oil cooler by-pass line) Pilot filter 1 10 mm These filters are centralized in arrangement for facilitating maintenance. CONTROLS 2 Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. 2 pedals provided for opening/ closing the bottom dump bucket. 2 Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 17 4 10 1 Left Console 2 Left Control Lever/Horn Switch 3 Left Travel Pedal 4 Left Travel Lever Right Travel Lever 6 Right Travel Pedal 7 Right Control Lever/Horn Switch 8 Right Console 9 Operator s Seat 10 Bucket Close Pedal (For Loading Shovel) Bucket Open Pedal (For Loading Shovel) 12 Pilot Control Shut-Off Lever 13 Rear Console Emergency Engine Stop Switch 1 Engine Speed Control Dial 3 2 7 1 8 13 9 6 12 1 UPPERSTRUCTURE Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the lay-out of deck machinery. s provides easy access to engine, hydraulic and electrical components. ISO-met stairs and handrails. s and stairs are provided with skid-resistant plates. 21 18 19 17 23 24 17 13 1 12 1 Engine Hydraulic Oil Tank 2 Engine Radiator 1 Fuel Tank 3 LTA Radiator Hydraulic Oil Cooler x 4 4 Fan Motor x 4 17 Hydraulic Oil Cooling Fan Motor x 2 Air Filter x 4 18 Lubricator 6 Hydraulic Pump x 8 19 Cab 7 High-Pressure Strainer x 8 20 Folding Stairs 8 Battery Unit 21 Ladder 9 Engine-Pump Bulkhead 22 Reserve tank (engine oil) 10 Muffler 23 Pump Transmission oil cooler Swing Device x 4 24 Fuel cooler 12 Control Valve x 4 2 Reserve tank(coolant) 13 Center Joint 26 Engine-Radiator Bulkhead Swing Device 4 high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed... 3.2 min -1 (rpm) 2 3 20 8 6 10 4 2 1 7 9 26 22 Key Switch 17 Monitor Display Operator's Cab The sturdy cab, with the top guard conforming to OPG Leve (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 800 mm wide, 2 10 mm high, roomy 7. m 3 cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level... 76 db(a) in the cab; on max. engine speed under no-load Eye level height... 6 760 mm 2 3
SPECIFICATIONS EX3600-6 UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N2 gas accumulator and relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser shoes of induction-hardened cast steel. Shoe width... 1 270 mm Numbers of Rollers and Shoes on Each Side Upper rollers... 3 Lower rollers... 8 Track shoes... 38 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. 2-stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0 to 2.2 km/h Low : 0 to 1.7 km/h Maximum traction force... 1 760 kn (179 00 kgf) Gradeability... 60 % (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 21.0 m 3 (heaped) bottom dump bucket Shoe Shoe width Operating weight Ground pressure Triple 190 kpa 1 270 mm 362 000 kg grousers (1.94 kgf/cm 2 ) Backhoe Equipped with 9.6 m BE-boom, 4. m BE-arm and 22.0 m 3 (SAE, PCSA heaped) bucket Shoe type Shoe width Operating weight Ground pressure Triple 188 kpa 1 270 mm 39 000 kg grousers (1.92 kgf/cm 2 ) SERVICE REFILL CAPACITIES liters Fuel tank 7 40 Engine coolant 6 Engine oil Engine oil pan 261 Reserve tank 280 Pump transmission device 62 Swing device 4 x 7 Travel device 2 x 220 Hydraulic system 4 000 Hydraulic oil tank 1 900 LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant. (Auto-Leveling Crowd Mechanism) Bucket Capacity (heaped) Width No.of teeth Weight Type Materials density 21.0 m 3 4 0 mm 28 300 kg 1 800 kg/m 3 23.0 m 3 4 0 mm 28 400 kg 1 600 kg/m 3 WORKING RANGES EH300 Ground Line : ESCO LOADMASTER TYPE Bucket Capacity (heaped) 21.0 m 3 A Min. digging distance 6 190 B Min. level crowding distance 9 180 C Level crowding distance 060 D Max. digging reach 1 470 E Max. cutting height 60 E Max. dumping height 10 990 F Max. digging depth 4 0 G Working radius at max. dumping height 8 60 H Max. bucket opening width 1 90 Arm crowding force 1 200 kn (122 000 kgf) Breakout force 1 00 kn (107 000 kgf) 4
SPECIFICATIONS EX3600-6 BACKHOE ATTACHMENTS Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket Capacity Width No.of Materials SAE, PCSA CECE Without With Weight Type teeth density heaped heaped side cutters side cutters 22.0 m 3 19.2 m 3 3 790 mm - 6 18 400 kg 1 800 kg/m 3 General purpose bucket WORKING RANGES EH300 Ground Line BE-boom length 9.6 m BE-arm length 4. m Bucket Capacity (SAE, PCSA heaped) 22.0 m 3 A Max. digging reach 18 190 A' Max. digging reach (on ground) 17 610 B Max. digging depth 8 80 B' Max. digging depth (8' level) 8 490 C Max. cutting height 17 690 D Max. dumping height 90 E Max. vertical wall 4 060 Bucket digging 1 00 kn ISO force (107 000 kgf) SAE: PCSA 932 kn (9 000 kgf) Arm crowd force ISO 91 kn (97 000 kgf) SAE: PCSA 922 kn (94 000 kgf) EQUIPMENT STANDARD EQUIPMENT ENGINE 0 A alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Fan guard Isolation-mounted engine Auto-idle system Emergency engine stop system Hydraulic drive cooling-fan system HYDRAULIC SYSTEM E-P control system OHS (Optimum Hydraulic System) FPS (Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB The sturdy cab, with the top guard conforming to OPG Level (ISO), helps protect the operator from falling objects. Fluid-filled elastic mounts. Laminated glass windshield. Reinforced/ tinted (bronze color) glass side and rear windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. Adjustable reclining seat with air suspension. Footrest. Air horn with electric compressor. Auto-tuning AM-FM radio with digital clock. Seat belt. Storage spaces. Floor mat. Air conditioner with defroster. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever. Standard equipment may vary by country, so please consult your Hitachi dealer for details. MONITOR SYSTEMS Meters: Hour meter. Fuel gauge. Hydraulic oil temperature gauge. Engine coolant temperature gauge. Tachometer. Engine oil pressure gauge.engine oil temperature gauge. Battery voltage gauge. Ambient temperature. Pilot lamps (Green): Pre-lub. Auto-Idle. Travel Mode. Warning lamps (Red): Alternator. Engine stop. Coolant overheat. Hydraulic oil level. Auto- Lubrication. Fast-filling. Tension. Electric lever. Emergency engine stop. Top valve. Engine over run. Coolant level. Engine oil pressure. Pump transmission oil level indicator. Warning lamp (Yellow): Exhaust temperature. Fuel temperature. Engine warning. Hydraulic oil overheat. Stairway position. Electrical equipment box. Pump contamination. Air cleaner restriction. Alarm buzzers: Overheat. Engine coolant pressure. Engine coolant level. Fuel temperature. Engine oil pressure. Engine oil temperature. Air intake manifold temperature. Crank case pressure. Pump transmission oil level. Hydraulic oil level. Stop valve close. Fast-fill system panel position(option) Ladder position. Electric lever fault. DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by PC and PDA. LIGHTS 9 working lights. 2 entrance lights. 7 maintenance lights. 2 cab lights. UPPERSTRUCTURE Lockable machine covers 40 200 kg counterweight Hydraulic drive grease gun with hose reel Folding stairs with wide steps Swing parking brake UNDERCARRIAGE Travel parking brake Travel motion alarm device Hydraulic track adjuster with N 2 gas accumulator and relief valve 1 270 mm triple grouser shoes MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 12 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing, and center joint OPTIONAL EQUIPMENT Wiggins couplers High brightness working lights. Back and right side color monitor camera. Optional equipment may vary by country, so please consult your Hitachi dealer for details. Satellite data transmitting system. Travel motor guard. Travel device guard. Electric oil pump to draw hydraulic oil from suction and return pipe lines. 6
SPECIFICATIONS EX3600E-6 ELECTRIC MOTOR High Voltage, Three Phase, Squirrel Cage Induction Motor, Totally Enclosed Air-to-Air-Cooled (TEAAC). Type... HITACHI TFOA-KK Rating Rated continuous output... 1 200 kw Voltage... AC 6 000-6 600 V / 0 Hz AC 6 600-6 900 V / 60 Hz Number of poles... 4 Synchronous RPM... 1 00 min -1 / 0 Hz 1 800 min -1 / 60 Hz Rated current... 124 A @ 6 600 V Insulation class... F class B raise Space heater included. Thermo-guard (temperature detector) Starting condition... Reactor 0 % tap HYDRAULIC SYSTEM OHS (Optimum Hydraulic System) 8 main pumps and 4 valves system enable both independent and combined operations of all functions. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system Main pumps... 8 variable-displacement,axial piston pumps for front attachment,travel and swing Pressure setting... 29.4 MPa (300 kgf/cm 2 ) Max.oil flow... 8 x 00 L/min Pilot pump... 1 gear pump Pressure setting... 4.4 MPa (4 kgf/cm 2 ) Max.oil flow... 0 L/min Relief Valve Settings Implement circuit... 29.4 MPa (300kgf/cm 2 ) Swing circuit... 29.4 MPa (300kgf/cm 2 ) Travel circuit... 29.4 MPa (300kgf/cm 2 ) Pilot circuit... 4.4 MPa (4kgf/cm 2 ) Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 2 360 mm 260 mm Arm 1 300 mm 220 mm Bucket 2 280 mm 200 mm Dump 2 22 mm 130 mm Level 1 360 mm 260 mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter 10 mm High pressure strainer 8 80 meshes (In main & swing pump delivery line) Drain filter 1 10 mm (For all plunger type pumps & motors) By-pass filter 1 mm (In oil cooler by-pass line) Pilot filter 1 10 mm These filters are centralized in arrangement for facilitating maintenance. CONTROLS 2 Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. 2 pedals provided for opening/ closing the bottom dump bucket. 2 Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 Left Console 2 Left Control Lever/Horn Switch 3 Left Travel Pedal 4 Left Travel Lever Right Travel Lever 4 10 3 2 7 1 8 13 9 6 12 1 UPPERSTRUCTURE Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the lay-out of deck machinery. s provides easy access to electric motor, hydraulic and electrical components. ISO-met stairs and handrails. s and stairs are provided with skid-resistant plates. 21 7 6 6 19 8 1 12 1 Main Motor 12 Cubicle 2 Coupler 13 Control Valve x 4 3 Pump Drive Unit Swing Device x 4 4 Hydraulic Pump x 8 1 Slip Ring Hydraulic Oil Cooling Fan Motor x 2 Center Joint 6 Hydraulic Oil Cooler x 4 17 High-Pressure Strainer x 8 7 Lubricator 18 Battery x 2 8 Pump Transmission Oil Cooler 19 Cab 9 Motor-Pump Bulkhead 20 Folding Stairs 10 Bulkhead 21 Ladder 13 17 20 4 1 18 3 9 2 22 10 6 Right Travel Pedal Hydraulic Oil Tank 22 Cab Heater Unit 7 Right Control Lever/Horn Switch 8 Right Console 9 Operator s Seat 10 Bucket Close Pedal (For Loading Shovel) Bucket Open Pedal (For Loading Shovel) 12 Pilot Control Shut-Off Lever 13 Rear Console Swing Device 4 high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed... 2.9 min -1 (rpm) Emergency Motor Stop Switch 1 Key Switch Monitor Display Operator's Cab The sturdy cab, with the top guard conforming to OPG Leve (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 800 mm wide, 2 10 mm high, roomy 7. m 3 cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Eye level height... 6 760mm 9
SPECIFICATIONS EQUIPMENT EX3600E-6 UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N2 gas accumulator and relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser shoes of induction-hardened cast steel. Shoe width... 1 270 mm Numbers of Rollers and Shoes on Each Side Upper rollers... 3 Lower rollers... 8 Track shoes... 38 Travel Device Each track driven by high-torque, axial piston motors, allowing counterrotation of tracks. 2-stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant. (Auto-Leveling Crowd Mechanism) WORKING RANGES Travel speeds... High : 0 to 2.1 km/h Low : 0 to 1.6 km/h Maximum traction force... 1 760 kn (179 00 kgf) Gradeability... 60 % (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 21.0 m 3 (heaped) bottom dump bucket Shoe Shoe width Operating weight Ground pressure Triple grousers 1 270 mm 33 000 kg SERVICE REFILL CAPACITIES 18 kpa (1.89 kgf/cm 2 ) liters Pump transmission device 62 Swing device 4 x 7 Travel device 2 x 220 Hydraulic system 4 000 Hydraulic oil tank 1 900 Bucket Capacity No.of Materials Width Weight Type (heaped) teeth density 21.0 m 3 4 0 mm 28 300 kg 1 800 kg/m 3 23.0 m 3 4 0 mm 28 400 kg 1 600 kg/m 3 : ESCO LOADMASTER TYPE STANDARD EQUIPMENT ELECTRIC MOTOR Space heater included Thermo-guard (temperature detector) HYDRAULIC SYSTEM OHS (Optimum Hydraulic System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB The sturdy cab, with the top guard conforming to OPG Level (ISO), helps protect the operator from falling objects. Fluid-filled elastic mounts. Laminated glass windshield. Reinforced/ tinted (bronze color) glass side and rear windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. Adjustable reclining seat with air suspension. Footrest. Air horn with electric compressor. Auto-tuning AM-FM radio with digital clock. Seat belt. Storage spaces. Floor mat. Air conditioner with defroster. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever. Standard equipment may vary by country, so please consult your Hitachi dealer for details. MONITOR SYSTEMS Meters: Hour Meter. Main Motor Coil Temperature Gauge. Main Motor Ammeter. Main Motor Voltmeter. Clock. Battery Voltage Gauge. Hydraulic Oil Temperature Gauge. Ambient Temperature. Pilot lamps(green): Main Motor Run. Travel Mode. Warning lamps:(red): Pump Transmission Oil Level. AC6600V Power Source. Cubicle Box. Hydraulic Oil Level. Auto-Lubrication. Stop Valve. 3E Relay. Main Motor Overheat. Main Motor Start Congestion. AC210V Power Source. Battery Charge. Electric Lever. Emergency Motor Stop. Tension. Cable Drum. Warning lamps:(yellow): Electrical Equipment Box. Stairway Position. Hydraulic Oil Overheat. Pump Contamination. Cab.heater. Warning lamps:(amber): Fast-Filling. Alarm buzzers: AC6600V Power Source. Cubicle Box. Hydraulic Oil Level. Stop Valve. Stairway Position. Pump Transmission Oil Level. 3E Relay. Main Motor Overheat. Main Motor Start Congestion. AC210V Power Source. EIectric Lever. Cable Drum. Fast-Filling. DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the hydraulic system. The record can be downloaded by PC and PDA. LIGHTS 9 working lights. 2 entrance lights. 7 maintenance lights. 2 cab lights. UPPERSTRUCTURE Lockable machine covers 40 200 kg counterweight Hydraulic drive grease gun with hose reel Folding stairs with wide steps Swing parking brake UNDERCARRIAGE Travel parking brake Travel motion alarm device Hydraulic track adjuster with N 2 gas accumulator and relief valve 1 270 mm triple grouser shoes MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 12 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing, and center joint EH300 Ground Line Bucket Capacity (heaped) 21.0 m 3 A Min. digging distance 6 190 B Min. level crowding distance 9 180 C Level crowding distance 060 D Max. digging reach 1 470 E Max. cutting height 60 E Max. dumping height 10 990 F Max. digging depth 4 0 G Working radius at max. dumping height 8 60 H Max. bucket opening width 1 90 Arm crowding force (SAE) 1 200 kn (122 000 kgf) Breakout force (SAE) 1 00 kn (107 000 kgf) OPTIONAL EQUIPMENT Wiggins couplers High brightness working lights. Back and right side color monitor camera. Optional equipment may vary by country, so please consult your Hitachi dealer for details. Satellite data transmitting system. Travel motor guard. Travel device guard. Electric oil pump to draw hydraulic oil from suction and return pipe lines. 10
TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. UPPERSTRUCTURE Folding stairs Weight : 773 kg Box Weight : 926 kg Bed (right) assembly Weight : 700 kg Cab assembly Weight : 170 kg Weight : 34 kg Weight : 9 kg Weight : 49 kg Weight : 9 kg Weight : 123 kg 2 830 1 800 780 1 30 1 720 2 000 2 130 2 0 3 190 2 20 1 290 1 360 1 290 1 290 1 290 3 10 1 100 2 130 1 600 00 2 420 1 880 27 409 407 709 682 Weight : 329 kg Weight : 20 kg Weight : 223 kg Weight : 24 kg Weight : 184 kg Weight : 6 kg Weight : 6 kg Weight : 22 kg Bed (left) assembly Weight : 8 460 kg 2 010 2 430 1 700 1 820 1 220 409 710 1 460 2 460 3 260 2 10 2 90 681 2 6 677 677 1 810 2 040 869 1 810 680 1 810 620 Step Weight : 39 kg Weight : 36 kg 0 0 Weight : 38 kg Weight : 226 kg 770 2 370 Weight : 218 kg Hose reel Weight : 0 kg Step Weight : 39 kg Weight : 17 kg Weight : 19 kg Weight : 32 kg 312 980 1 280 1 280 2 360 1 810 2 170 60 729 368 80 1 090 1 720 1 670 1 720 1 020 2 920 1 960 2 600 2 220 204 400 261 261 28 60 419 364 682 683 Switchbox Weight : 37 kg Weight : 329 kg Main frame assembly Weight : 41 600 kg Weight : 17 kg Weight : 33 kg Step Weight : 37 kg Step Weight : 48 kg Suction pipe Weight : 34 kg Suction pipe Weight : 33 kg 42 1 480 3 080 80 364 1 700 2 10 3 380 1 020 1 020 63 610 1 00 86 86 290 20 2 60 820 8 940 3 10 223 28 422 342 290 290 12 13
TRANSPORTATION Engine unit Weight : 26 00 kg 6 810 Air cleaner and muffler Weight : 1 310 kg Suction manifold Weight : 422 kg Counterweight Weight : 40 200 kg Reserve tank ( engine oil ) Weight : 1 kg 8 10 1 70 1 900 1 040 3 220 1 330 2 20 1 380 Reserve tank ( coolant ) Weight : 8 kg Bracket Weight : 13 kg Bracket Weight : 13 kg Weight : 176 kg Weight : 1 kg Weight : 60 kg 661 1 80 9 1 40 43 306 306 1 230 832 0 0 3 190 910 3 20 2 670 s Weight : 9. kg x 2 Bolts Weight : 30 kg x 8 98 3 1 394 2 360 98 913 12 12 866 280 97 30 100 Weight : 71 kg Weight : 4 kg Weight : 10 kg Weight : kg Weight : kg Weight : 20 kg Weight : 23 kg Weight : 39 kg Weight : 23 kg Weight : kg 1 210 1 410 29 720 262 1 020 1 80 2 610 3 430 2 610 1 690 697 997 804 620 496 62 68 997 80 20 173 217 199 261 199 3 Weight : 1 kg Weight : kg Door Weight : 36 kg Weight : 1 kg Weight : 30 kg Weight : 107 kg Washers Weight : 0.8 kg x 60 Bolts Weight : 9.3 kg x 60 864 937 64 100 98 1 310 1 870 1 230 430 9 2 360 1 940 386 0 74 386 646 20 8 1
TRANSPORTATION UNDERCARRIAGE LOADER ATTACHMENTS Weight : kg Weight : 101 kg Weight : 101 kg Weight : 80 kg s Weight : 28 kg x 2 Ladder Weight : 19 kg Ladder Weight : 9 kg 2 370 0 44 470 799 831 1 070 1 070 82 47 Boom assembly Weight : 3 800 kg Boom cylinders Weight : 4 31 kg x 2 Support Weight : 87 kg Step Weight : kg Ladder Weight : 18 kg 7 940 2 Track side frame assembly Weight : 46 900 kg x 2 Arm assembly Weight : 13 200 kg 0 2 170 2 360 Arm cylinder Weight : 2 720 kg 4 19 640 700 60 30 Stopper Weight : 18 kg Track center frame assembly Weight : 31 00 kg Bolts Weight : 6.9 kg x 68 Washers Weight : 6.3 kg x 68 Bucket cylinders Weight : 2 420 kg x 2 Front bucket assembly Capacity ; 21.0 m 3 (heaped) Weight : 13 760 kg Rear bucket assembly Weight : 740 kg 98 31 102 2 4 290 3 0 1 89 3 00 3 00 8 102 88 3 99 4 2 17
TRANSPORTATION TRANSPORTATION & LIFTING CAPACITIES BACKHOE ATTACHMENTS Boom assembly Weight : 31 600 kg Boom cylinders Weight : 4 00 kg x 2 Rubbers weight : 0.03 kg x 10 Shrouds weight : 37 kg x Spools weight : 2.7 kg x 6 Wedges weight : kg x 6 Teeth weight : 90 kg x 6 3 640 701 220 76 42 274 24 0 292 49 267 10 10 063 60 Clamp assembly Weight : 27 kg s Weight : kg x 2 188 2 2 A: Load radius B: Load point height C: Lifting capacity METRIC MEASURE Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg 6 Conditions Load point height Load radius 8 m 10 m 12 m m 1 m m At max. reach m Arm assembly Weight : 23 700 kg Bucket assembly Capacity ; 22.0 m 3 (SAE, PCSA heaped) Weight : 17 900 kg EX3600-6 Boom BE-boom 9.6 m Arm BE-arm 4. m Bucket SAE, PCSA 22.0 m 3 CECE 19.2 m 3 13 m *29. *29. *1.4 *1.4 1.8 12 m *31.0 *31.0 *.9 *.9.3 10 m *29.8 *29.8 *28.0 *28.0 *.4 *.4 17.1 8 m *31.4 *31.4 *31.9 *31.9 *27.2 *27.2 *. *. 17.6 6 m *44.4 *44.4 *39. *39. *36. *36. *32.8 *32.8 *1.0 *1.0 17.7 4 m *79.6 *79.6 *9.0 *9.0 *43.7 *44.3 37.7 *38.1 *26. *26. *.1 *.1 17. 2 m 76.6 80.8.6 *62.1 41.6 *48.9 36.1 *43.3 *27.6 *27.6 *17.8 *17.8 17.1 0 (Ground) 73.9 76. 3.4 *9. 40.1 *46.0 3.1 *39.6 *18. *18..3-2 m *62.8 *62.8 *66.9 *66.9 2. *2.6 *39.0 *39.0 *30.8 *30.8-4 m *8.1 *8.1 *1. *1. *40.0 *40.0 *23.8 *23.8 - m *4.1 *4.1 *41.0 *41.0 *30.3 *30.3 2 910 3 10 Notes: 1.Ratings are based on SAE J1097. 2.Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket. 4.*Indicates load limited by hydraulic capacity. 6 063 3 340 3 910 18 19
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery Co., Ltd. www.hitachi-c-m.com KS-EN10 08.09 (KA/KA,MT3) Printed in Japan