1 831 1847P01 Cable Temperature Sensors QAP... Use The sensors are used in heating, ventilation and air conditioning plants to acquire the temperature. They are for use with the corresponding accessories as: strap-on sensors for pipework strap-on sensors for solar collectors immersion sensors Changeover (from heating to cooling or vice versa) Type summary Type reference Sensor element Cable length Material connecting cable Measuring range Weight (incl. packaging) QAP2010.150 Pt 100 1,5 m silicone -30 +130 C 0,05 kg QAP2012.150 Pt 1000 1,5 m silicone -30 +130 C 0,05 kg QAP21.3 LG-Ni 1000 1,5 m silicone -30 +130 C 0,05 kg QAP21.3/8000 LG-Ni 1000 8 m silicone -30 +130 C 0,23 kg QAP22 LG-Ni 1000 2 m PVC -25 + 95 C 0,06 kg QAP1030.200 NTC 10k 2 m PVC -25 + 95 C 0,06 kg CE1N1831en 2017-12-01 Building Technologies
Accessories Name Part number/ type reference Protection pocket, Ms63, PN10, immersion length 100 mm ALT-SB100 1) Cable holder for protection pocket mounting 4 213 1416 0 Changeover mounting kit For fitting on pipes (pipes of about 13...35 mm dia.), consisting of holding piece and cable ties (2x) Aluminium bar Consisting of bar with riveted holder and rubber grommet ARG22.1 2) ARG22.2 1) For other protection pocket accessories, refer to Data Sheet N1194. 2) Suited for max. 95 C. Use cable ties made of metal for temperatures above 95 C Ordering and delivery When ordering, please give type reference of sensor and part numbers / type reference of the accessories required. Example: Cable temperature sensor QAP2010.150. The cable temperature sensor is supplied without any mounting accessories. These must be ordered separately. Equipment combinations The cable temperature sensors are suited for use with all types of controllers that can handle the sensor s passive output signal. Function The sensor acquires the temperature via its sensing element. The resistance of the sensing element changes as a function of the ambient temperature. The resistance value is used for further handling by a suitable controller. Sensing elements LG-Ni 1000 Characteristic: Accuracy: R [] [K] 1800 1801D01 1.5 1801D02 1600 1.0 1400 0.5 1200 1000 0.5 800 1.0 600 1.5 40 30 20 10 0 10 20 30 40 50 60 70 80 40 30 20 10 0 10 20 30 40 50 60 70 80 2/6
Pt 100 (class B) Characteristic: Accuracy: R [] 160 1847D01 0.8 [K] 1847D02 140 0.4 120 100 0.4 80 40 30 20 10 0 10 20 30 40 50 60 70 80 0.8 40 30 20 10 0 10 20 30 40 50 60 70 80 Pt 1000 (class B) Characteristic: Accuracy: R [] [K] 1600 1400 1847D05 5.0 4.0 3.0 2.0 1.0 1847D04 1200 1.0 1000 2.0 3.0 800 40 30 20 10 0 10 20 30 40 50 60 70 80 4.0 5.0 30 20 10 0 10 20 30 40 50 60 70 80 NTC 10k Characteristic: Accuracy R [] 1000000 100000 10000 1000 100-30 -20-10 0 10 20 30 40 50 60 70 80 1847D09 [K] 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2-0.2-0.4-0.6-0.8-1.0-1.2-1.4-1.6-1.8-30 -20-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 1847D08 [ C] Legend R Resistance in Ohm Temperature in degrees Celsius 3/5
Mechanical design The sensor consists of sleeve (40.5 mm in length), sensing element and 2-core connecting cable. The sensing element is encapsulated in the sleeve so that it is mechanically and electrically protected. The sleeve also ensures strain relief for the connecting cable. The end of the cable carries ferrules for easy connection. Different accessories are available for fixing the sensor. Engineering notes Mounting and installation notes The permissible cable lengths are dependent on the type of controller with which the sensor is used. They are specified in the Data Sheet of the relevant controller. The connecting cable should always be connected to a conduit box. When mounted in a protection pocket, the sensor must always be fixed in the pocket by means of the cable holder. Instructions for mounting in induction or fan coil units: The sensor should be fitted in the location specified by the manufacturer of the terminal unit. If there is no such specification, it must be fitted in the return air flow where it captures the temperature of the room air drawn in. It should be fitted as high as possible to minimize the floor effect. The sensor must be protected against heat radiation from the terminal unit. Disposal The device is considered electrical and electronic equipment for disposal in terms of the applicable European Directive and may not be disposed of as domestic garbage. Dispose of the device via the channels provided for this purpose. Comply with all local and currently applicable laws and regulations. 4/6
Technical data Functional data Degree of protection Electrical connections Environmental conditions Environmental compatibility Materials Weight Measuring range Sensing element Time constant Sensor with ARG22.1 (attached to pipe) approx. 25 s Sensor with protection pocket <30 s Sensor with ARG22.2 in air at v = 3 m/s <1 min Measurement accuracy refer to "Function" Type of measurement and output passive Protection degree of housing IP65 according to EN 60529 Protection class III according to EN 60730-1 Connecting cable Cross-sectional area Length Perm. cable lengths Permissible ambient temperature for silicone cables for PVC cables 2-core, interchangeable 2 x 0.34 mm 2 see "Type summary" refer to "Engineering notes" 30...140 C 25...+95 C, Short-time (2 h/d) +110 C Perm. ambient humidity 95 % r. h. EU conformity (CE) 8000073890 *) The product environmental declaration CE1E1701 *) contains data on environmentally compatible product design and assessments (RoHS compliance, materials composition, packaging, environmental benefit, disposal). Sensor sleeve stainless steel 1.4571 (V4A) Connecting cables Packaging corrugated cardboard Incl. packaging *) The documents can be downloaded from http://siemens.com/bt/download. 5/5
Internal diagram 1847G01 The internal diagram is identical for all types of cable temperature sensors covered by this Data Sheet. The connecting wires are interchangeable. Dimensions Sensor QAP Protection pocket ALT-SB100 Changeover mounting kit for fitting on pipes ARG22.1 Aluminium bar ARG22.2 12 40,5 30 13 100 13 22 130 6,5 7 x 10 10 5 5,3 ø 6 1831M06 G½ A ø 9 1832M04 22 2 2 16 1831M05 Dimension in mm Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 58-724 24 24 www.siemens.com/buildingtechnologies Siemens Switzerland Ltd 2014 Delivery and technical specifications subject to change 6/6