EN manufacturer PA FOLING ALUMINUM GANTRY RANES, movable under load T 500 500 T Accessories OMALU Alu removable OMALU Aluminium lifting equipments Alu removable www.comege.fr
Alu removable OMALU Span = 2 m 1 bag of 24 kg STANAR EQUIPMENT 1 unique removable jib crane for many locations MU Kg - Span 2 m max Only 1 bag provided Stainless steel load cablet : length 1m Adjustable span from 900mm to 2000 mm Fitting the pivot on ball bearings Jib crane extension 2 heights available (2 extensions provided) Powder coating on anodized Galvanized lifting winch with stainless steel pulleys and cable Jib crane in 3 parts / installation very fast 2 stainless shackles for hoist or accessory Winch for persons lifting with fall protection Socket fixed to the floor, wall, or sealed 2995 mm 2800 mm 2625 mm A 2340 mm Span A = 1700 Span = 1400 Span = 1100 Span = 800 2345 mm Arm assembly Assembly of the extension Set weight = 24KG Span A = 2000 Span = 1600 Span = 1 Span = 900 Removable lifting solution, efficient and safe the jib crane OMALU contributes to improving the responsiveness of your teams. Its aluminum frame guarantee you maximum portability and facilitates interventions on sites difficult to access. A single man can so proceed safely to the assembly of 3 elements which compose the OMALU. Mounting on the socket kg 2210 mm 2010 mm Height of hanging A = 2220 mm = 2530 mm = 2700 mm = 2850 mm Height of hanging A = 1665 mm = 1920 mm = 2110 mm = 2240 mm Long extension supplied as Short extension supplied as Fixation with pulling the pin A 1780 mm arry bag (included) gives your team the ideal tool for interventions on site quickly and efficiently. All the parts that make up the OMALU- is grouped into one sturdy bag. A single person can carry the jib crane, assemble, place on the base and make the lift safely. 1 = 1 bag of 24 Kg ontents of the bag Implementation of the hoist 1 JI RANE = 2 POSSILE METHOS OF ASSEMLY
OMALU STANAR EQUIPMENT Alu removable with winch T A single removable jib crane with winch for many locations Span 2 m 2 bags 2 carry bag provided Stainless steel load cablet : length 1m Adjustable span from 900mm to 2000 mm Fitting the pivot on ball bearings Jib crane extension 2 heights available (2 extensions provided) Powder coating on anodized Galvanized lifting winch with stainless steel pulleys and cable Jib crane in 4 parts / installation very fast 2 stainless shackles for hoist or accessory Winch for persons lifting with fall protection Set weight = 2 bags of less than 24Kg 1 stainless winch Socket fixed to the floor, wall, or sealed Arm assembly MU Kg - Span 2 m max Span A = 2000 Span = 1600 Span = 1 3130 mm 2995 mm 2835 mm A 2550 mm Span A = 1700 Span = 1400 Span = 1100 Span = 800 2522 mm 2408 mm Fixation with pulling the pin Span = 900 kg Mounting on the socket Get in 8 spanheight couples. It is the ideal for lifting loads and people in treatment plant or by the sea, and generally anywhere a jib crane can not be used. Secure sockets and enjoy the lightness of a single removable for many configurations. 2330 mm Hauteur d accrochage A = 2275 mm = 2560 mm = 2715 mm = 2850 mm Hauteur d accrochage A = 1713 mm = 1956 mm = 2132 mm = 2243 mm Long extension supplied as Short extension supplied as able entry A 2000 mm 1 JI RANE = 2 POSSILE METHOS OF ASSEMLY ontents of bag n 1 To minimize the risks due to carrying heavy loads, the components of the OMALU-T are grouped into two bags robust. A single person can carry the, assemble on the socket and make the lift safely. Make lifting 1 with winch = 2 bags of less than 24Kg ontents of bag n 2
Alu removable OMALU 500 500 kg Span = 1,5 m 1 bag of 24 kg 1 unique removable jib crane for many locations Removable lifting solution, efficient and safe the jib crane OMALU contributes to improving the responsiveness of your teams. Its aluminum frame guarantee you maximum portability and facilitates interventions on sites difficult to access. A single man can so proceed safely to the assembly of 3 elements which compose the OMALU. STANAR EQUIPMENT MU Kg - Span 1,5 m max Only 1 bag provided Stainless steel load cablet : length 1m Adjustable span from 800mm to 1500 mm Fitting the pivot on ball bearings Jib crane extension 2 heights available (2 extensions provided) Powder coating on anodized Galvanized lifting winch with stainless steel pulleys and cable Jib crane in 3 parts / installation very fast 2 stainless shackles for hoist or accessory Winch for persons lifting with fall protection Set weight = 24KG Socket fixed to the floor, wall, or sealed Mounting on the socket Span A = 1500 Span = 1250 Span = 1050 Span = 800 A 2660 mm 2580 mm 2480 mm 2330 mm Span A = 1500 Span = 1250 Span = 1050 Assembly of the extension 120 Span = 800 A 1990 mm 1860 mm 1710 mm 1530 mm Arm assembly Long extension supplied as Height of hanging A = 2220 mm = 2370 mm = 2470 mm = 2550 mm Short extension supplied as 1 JI RANE = 2 POSSILE METHOS OF ASSEMLY Height of hanging A = 1380 mm = 1610 mm = 1750 mm = 1870 mm Fixation with pulling the pin arry bag (included) gives your team the ideal tool for interventions on site quickly and efficiently. All the parts that make up the OMALU- is grouped into one sturdy bag. A single person can carry the jib crane, assemble, place on the base and make the lift safely. 1 = 1 bag of 24 Kg ontents of the bag Implementation of the hoist
Get in 8 spanheight couples. It is the ideal for lifting loads and people in treatment plant or by the sea, and generally anywhere a jib crane can not be used. Secure sockets and enjoy the lightness of a single removable for many configurations. 500 kg Alu removable with winch 2 bags 500 T A single removable jib crane with winch for many locations Mounting on the socket OMALU STANAR EQUIPMENT Span 1,5 m MU 500 Kg - Span 1,5 m max 2 carry bag provided Stainless steel load cablet : length 1m Adjustable span from 800mm to 1500 mm Fitting the pivot on ball bearings Jib crane extension 2 heights available (2 extensions provided) Powder coating on anodized Galvanized lifting winch with stainless steel pulleys and cable Jib crane in 4 parts / installation very fast 2 stainless shackles for hoist or accessory Winch for persons lifting with fall protection Set weight = 2 bags of less than 24Kg 1 stainless winch Socket fixed to the floor, wall, or sealed Span A = 1500 Arm assembly Span = 1250 Span = 1050 Span = 800 2818 mm 2746 mm 2657 mm A 2515 mm Span A = 1500 Span = 1250 Span = 1050 Span = 800 2170 mm 2065 mm Fixation with pulling the pin 1930 mm A 1730 mm Height of hanging A = 1445 mm = 1658 mm = 1788 mm = 1890 mm Long extension supplied as Short extension supplied as able entry Height of hanging A = 2240 mm = 2380 mm = 2470 mm = 2540 mm 1 JI RANE = 2 POSSILE METHOS OF ASSEMLY ontents of bag n 1 To minimize the risks due to carrying heavy loads, the components of the OMALU-T are grouped into two bags robust. A single person can carry the, assemble on the socket and make the lift safely. Make lifting 1 with winch = 2 bags of less than 24Kg ontents of bag n 2
accessories SOKETS EXTENSIONS To meet all your mounting configurations, we offer a range of accessories to facilitate the implementation of our aluminum on your sites. The use of several sockets for the same jib crane greatly enhances handling costs. The extension allows the guardrail crossing or increase the lift height. Mounting example: low version LEVO + extension Hauteur de la réhausse = 1000 mm 190 2780 mm 1100 mm Span max. = 1700 mm OPTIONS Stainless steel load cablet : length 1m Hoist platform with pulleys and steel cable Winch for persons lifting with fall protection x Sockets 180 250 ø 20 50 85 155 ø 20 It is for the user to ensure the proper anchoring and quality of the support of the socket before any use of. 140 to seal 250 on the floor 160 200 walled 160
There are many sites which have the particularity of requiring mobile and in great quantities lifting equipments. When all the options of installation were exhausted, gantry PA appears as an ideal solution. Lightness and robustness are the advantages of aluminium gantry structure. The PA is mounted on caster wheels for indoor or outdoor. It is movable in load on smooth and clean ground. FOLING ALUMINUM GANTRY RANES movable under load pa from 250 kg to 2000 kg Optional electric or manual hoist 1 unique movable aluminium gantry crane for many locations Span Working span esign with hollow profile for greater flexibility Height under beam min. Height under beam max. Grip handle for height adjustment description Light construction olted joints with 8 bolts between leg and beam Assembly requires 1 to 3 people, according to model Flexibility of movement due to its light weight Hollow-section gantry girder Hoist trolley provided Height under beam can be adjusted by single person ismantles into 3 parts White polyamide wheels, with 2 locking wheels Maximum hoisting speed = 8m/min Feet fold up for transport anded polyurethane wheels complete range MU (Kg) Span (m) 2 additional locking wheels Non-rotating wheels Size can be adjusted to your needs by request Hoist power supply cable Electric or manual hoist 250 2 2,5 3 3,5 4 4,5 5 5,5 6 500 2 2,5 3 3,5 4 4,5 5 5,5 6 1000 2 2,5 3 3,5 4 4,5 5 5,5 6 1600 2 2,5 3 3,5 4 4,5 5 2000 2 2,5 3 3,5 4
New range aluminium spreader beams PALF ALU Aluminum monobeam spreaders PALR ALU Adjustable aluminum monobeam spreaders Fixed or adjustable aluminum monobeam spreader Adjustment of hooks by removable pins (adjustable spreader beams only) Equipped with 2 articulated, rotating hooks with forged safety latches Tear-resistant eyelets for use with synthetic slings, cables, etc. Safety factor: 4 No structural weld Manufactured according to NFE 52210 Group = FEM5 Pitch = 100mm (adjustable spreader beams only) Maximum hoisting speed = 16m/min elivered with user s and maintenance manual and E certificate of compliance For superior capacities, contact us. PALHF ALU H-bar aluminum fixed spreader beams PALHR ALU H-bar aluminum adjustable spreader beams H-bar aluminum fixed or adjustable spreader beam Adjustment of hooks on secondary beams Adjustment of secondary beams on the main beam Equipped with 4 articulating, rotating hooks with forged safety latches Tear- resistant eyelets for use with synthetic slings, cables, etc. Safety factor: 4 No structural weld Manufactured according to NFE 52210 Group = FEM5 Low headroom Maximum hoisting speed = 16m/min elivered with user s and maintenance manual and E certificate of compliance For superior capacities, contact us. onception graphique & photographies : Stephan Pelissier - stephanpelissier@gmail.com the french leader in JI RANES, GANTRY RANES and spreader EAMS 2 impasse des vernes 71370 Saint-Germain du Plain - France tel 33 (0)3 85 47 37 80 fax 33 (0)3 85 47 40 17 postmaster@comege.fr www.comege.fr