S P I N K L E S SpecSheet 570Z Series Fied-Spray Sprinklers and MP Plus Spray s Advanced fied-spray performance. 570Z Series sprinklers are ideal for small turf areas and intricate designs. These sprinklers feature a low-pressure seal that flushes only upon retraction, which allows more sprinklers to be placed on the same zone. etraction flushing also clears debris. 570 MP Plus nozzles have a host of unique features, including true matched precipitation rates, color coding by radius and a standard pressure-compensating device to provide increased precision. MP Plus nozzles fit any 570 pop-up body, shrub adapter, riser etender or shrub riser. esidential Commercial Municipal Athletic
0 EA S OF ELIABILIT B I S P I N K L E S Toro 570 Series Sprinklers 0'-6' adius Featuring a low-pressure seal that flushes only upon retraction, 570Z models are ideal for small turf areas and intricate designs. Seven distinct pop-up sprinkler bodies, a host of interchangeable nozzles and over 0 special-application nozzles provide unlimited fleibility. MP Plus nozzle with free PCDs atcheting riser lets you fine-tune after installation Zero flush seal, on retraction Small (" cap diameter) solid black cap is less visible, reducing damage from eposure Side inlet available on 6" and " models Optional: Check-O-Matic seal installed into riser prevents lowhead drainage Seal prevents flushing on pop-up enables more sprinklers to be placed on the same zone Low-pressure sealing at 5 PSI etraction flushing clears debris for reliable pop-down Small (" diameter) solid black cap is less visible, reducing damage from eposure Accepts all Toro spray nozzles including 570 MP Plus spray nozzles and filter screens Accepts Maijet nozzles for low-application-rate spray Check-O-Matic models available eliminating low-head drainage atcheting riser feature for easy arc adjustment Side inlet available on both 6" and " sprinkler bodies for easier installation Durable engineering plastic construction Stainless-steel retraction spring Screw-on cap (retrofits all previous Toro 570C bodies) Effluent cover available (Part No. 89-975) 0 E A S O 570 F 0 Series 0 E L I A E A S O F Sprinklers E A S B I L I T E L I A L I T ecommended operating pressure: 0-50 PSI Maimum operating pressure: 75 PSI Flow rate: 0.05-4.58 GPM " female-threaded inlet Dimensions: Body diameter: 8" on ", ", 4" and 6" bodies 5 8" on " body Cap diameter: " Side inlet 4 4" from top of sprinkler to center of side inlet Specifying Information Sprinklers 570Z XXP Pop-Up Height Optional Optional " SI Side Inlet (optional) COM Check-O-Matic 6 6" for 6" and " Models 4 4" " " For Eample: When specifying a 570Z Series Sprinkler with a pop-up height of 4" and a check valve, you would specify: SI 570Z-4P-COM COM
Toro 570 MP Plus Spray s True matched precipitation rates and color coding by radius are just a few of the unique features of 570 MP Plus spray nozzles. Fits any 570 pop-up body, shrub adapter, riser etender or shrub riser. Matched precipitation rates ensure that all nozzles (every radius and pattern) apply water at the same rate Low-flow rates allow for more sprinklers to be placed on the same zone PCDs eliminate fogging, conserve water and provide precise flow rates; standard pre-installed or separately Color coding by radius for easy identification Complete selection of arcs for all radius options full, 4,,, and 4 Uniform watering patterns eliminate over and under throw; refined design of part-circle patterns for better arc Precise radius/flow adjustment, will not lose adjustment 5' radius nozzles adjust to ' Standard and special spray patterns Patterns for small areas Full set of arcs for 0', 8' and 5' radius nozzles 4'8' side strip ideal for parking lot medians '6' for small planter beds and other narrow areas 5' 5 levels of trajectory Ape at 0 PSI Ma. Ht. of Spray Series 7 5 0 5' 4'8" ' '7" 0' '4" 8' 0' ' 5' Special Patterns 8' '" 5' '6" Convenient nozzle packaging nozzles and screens packed separately in attached bags Fine-mesh filter screens prevent clogging of lower-gallonage nozzles Operating pressure for optimum nozzle performance: 0 PSI ecommended operating pressure range: 0-50 PSI Maimum operating pressure: 75 PSI Adjustment screw allows up to 5% reduction in radius and complete shutoff adius-adjustment screw provides 5% radius reduction and complete shutoff Precision-cut opening to ensure true matched precipitation rates 570 MP Plus Color-coded band to indicate radius Threaded to fit any Toro 570 pop-up body, riser or adapter Pressure-compensating device maintains constant performance Specifying Information MP s XX XXX adius Arc Optional 5 5' Q 90 F 60 PC Pressure Compensation 8 8' T 0 EST End Strip 0 0' H 80 CST Center Strip ' TT 40 SST Side Strip 5 5' TQ 70 For Eample: When specifying a 570 MP Plus with a radius of 0', a 80 arc and pressure compensation, you would specify: 0-H-PC PC
Toro 570 ADJ Adjustable Arc 5' adius Fleibility. Precise spray patterns. One nozzle. Designing intricate landscapes just got easier with the 570 ADJ nozzle from Toro. It s everything you need to turn the perfect blueprint into a beautiful landscape. LEFT WATEING BODE Stainless-steel radius (flow) adjustment screw provides 5% radius reduction and full Off Graphically illustrates the left (fied) side of arc Indicates nozzle radius: 5 ADJ aised stationary center and barbed underside minimize risk of accidental arc adjustment IGHT WATEING BODE Arc Adjustment adius adjustment screw provides 5% radius reduction and full Off Adjustable arc from 0 0 Factory preset at 80, graphically identified s can be installed onto any 570 body, shrub adapter, riser or etender Left and right side of arc identified Wet or dry adjustment Vandal-resistant design to ensure arc setting Align left-side indicator with left watering border. Arc is preset at the factory to 80. otate outer ring: left to decrease, right to increase. Align right-side indicator to the desired spray coverage aised portion provides ecellent grip during adjustment even when wet Gray top identifies adjustable arc nozzle Adjustment ring arrow indicates right (adjustable) arc position Graphically illustrates arc settings adius range: 4' 7' Operating pressure range: 0 50 PSI GPM range: 0 5.5 Maimum operating pressure: 75 PSI Specifying Information XX Note: subject to change without notice. For more information, contact your local Toro distributor. 570 Adjustable Arc Performance Chart @ 0 PSI @ 0 PSI @ 40 PSI @ 50 PSI AC AD GPM AD GPM AD GPM AD GPM 45 4' 0.65.95.55 5' 0.8.0.77 6' 0.95.0.86 7'.09.6.9 90 4'.0.50.6 5'.6.69. 6'.58.75.8 7'.77.7.6 5 4'.5.9.99 5'.90.50.6 6'.7.6.7 7'.58.64.9 80 4'.0.6.6 5'.65.6.7 6'.06.66.0 7'.4.64.9 5 4'.49.6.96 5'.98.6.04 6'.45.40.08 7'.87.8.06 70 4'.68.0.75 5'.0.7.88 6'.8..9 7' 4.0.0.9 5 4'.87.86.6 5'.6.04.77 6' 4..08.8 7' 4.7.07.80 * Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 55% of diameter. Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter. ADJ adius Arc 5 5' Variable, 0 0 For Eample: When specifying a 5' 570 ADJ Adjustable Arc, you would specify: 5-ADJ Note: To specify a 570 ADJ Adjustable Arc with a 570Z sprinkler body, attach the body specification before the nozzle specification. New red screen reduces debris contamination
S P I N K L E S Toro Maijet Microspray Irrigation Maimum versatility with low-volume benefits. Toro Maijet microsprays can be used with all Toro 570 Series pop-up sprinklers, shrub adapters, risers and etenders. Now, precision water conservation is simpler than ever. 570Z Series Adapters 0 GPH Series with 0 Trajectory MJ-4Q 0 0.5 4.5 0.8 5.0 40 4.6 5.5 MJ-4Q-PC 0-50 0.0 4.5 MJ-4H 0 0.5 4.0 0.8 4.5 40 4.6 4.5 MJ-4H-PC 0-50 0.0 4.0 MJ-4F 0 0.5 4.0 0.8 5.0 40 4.6 5.0 MJ-4F-PC 0-50 0.0.5 MJ-4CST 0 0.5.5.0 0.8 5.5.0 40 4.6 6.0.5 MJ-4CST-PC 0-50 0.0 4.0.0 Fits all Toro 570 Series pop-up sprinklers, shrub adapters, risers and etenders, adapter and pressure-compensating screen are pre-assembled Pressure compensation provides uniform application over elevation changes and long runs Flush mount top hat design allows the nozzle assembly to retract into the body (on pop-up models) for added debris and vandal resistance Low-flow rates reduce runoff in compacted soils and percolation in sandy soils s and pressurecompensating screens are color coded by GPH for easy identification Three radius and flow-rate choices: 0 GPH (blue) 4' 5 GPH (green) 5' 4 GPH (red) 6' 5 GPH Series with 0 Trajectory MJ-5Q 0 6.0 6.5 0 9.9 7.0 40.7 7.5 MJ-5Q-PC 0-50 5.0 5.5 MJ-5H 0 6.0 6.5 0 9.9 7.0 40.7 7.5 MJ-5H-PC 0-50 5.0 5.5 MJ-5F 0 6.0 4.5 0 9.9 5.0 40.7 5.0 MJ-5F-PC 0-50 5.0 5.0 MJ-5CST 0 6.0 4.5.0 0 9.9 5.5.0 40.7 6.5.5 MJ-5CST-PC 0-50 5.0 5.0.0 Four nozzle patterns: 90 quarter-circle 80 half-circle 60 full-circle Center strip ecommended operating range: 0-50 PSI Maimum operating pressure: 70 PSI Flow rate: 0-4 GPH Note: subject to change without notice. For more information, contact your local Toro distributor. 4 GPH Series with 0 Trajectory MJ-6Q 0.5 7.0 0 9. 8.0 40.6 8.5 MJ-6Q-PC 0-50 4.0 6.5 MJ-6H 0.5 5.0 0 9. 5.5 40.6 6.0 MJ-6H-PC 0-50 4.0 5.5 MJ-6F 0.5 5.0 0 9. 6.5 40.6 7.5 MJ-6F-PC 0-50 4.0 5.5 MJ-6CST 0.5 5.5.0 0 9. 6.5.5 40.6 7.0.5 MJ-6CST-PC 0-50 4.0 6.0.0 Toro 570 Series Shrub Adapter Accepts all Toro 570 Series spray, stream bubbler and flood bubbler nozzles " NPT female-threaded inlet Toro 570 Series isers and Etender Accepts all Toro 570 Series spray, stream bubbler and flood bubbler nozzles 570-6X Base has the same male threads as Toro spray nozzles 570-S6 and 570-S8 " NPT male-threaded inlet 8" 6" 6" 570-6X Etender 570 S-6 iser 570 S-8 iser
570Z MP Plus Spray Performance Chart 5' Series with 0 Trajectory 5-Q 0 0.05 4'..40 4 0 0.09 5'.40.6 40 0. 6'.54.78 50 0.5 6'.6.86 5-Q-PC 0-40 0.09 5'.40.6 40-75 0.0 5'.55.79 5-T 0 0.07 4'.7.47 0 0. 5'.40.6 40 0.6 6'.54.78 50 0.0 6'.6.86 5-T-PC 0-40 0. 5'.40.6 40-75 0. 5'.55.79 5-H 0 0.0 4'..40 0 0.9 5'.47.70 40 0. 6'.47.70 50 0.7 6'.45.68 5-H-PC 0-40 0.8 5'.40.6 40-75 0.0 5'.55.79 5-TT 0 0.5 4'.6.57 0 0.5 5'.45.68 40 0.0 6'.44.66 50 0.5 6'.4.6 5-TT-PC 0-40 0. 5'.4.54 40-75 0.7 5'.57.8 5-TQ 0 0.0 4'.6.86 4 0 0.9 5'.50.7 40 0.4 6'.45.68 50 0.40 6'.44.66 5-TQ-PC 0-40 0.6 5'.4.55 40-75 0.9 5'.50.7 5-F 0 0.5 4'.5.75 0 0.8 5'.47.70 40 0.45 6'.44.66 50 0.5 6'.4.65 5-F-PC 0-40 0.5 5'.6.57 40-75 0.9 5'.5.75 ' Series with Trajectory -Q 0 0.40 '.8.48 4 0 0.50 '.5.55 40 0.60 '.4.64 50 0.6 '.44.67 -Q-PC 0-40 0.48 '.9.49 40-75 0.5 '.4.65 -T 0 0.57 '.7.58 0 0.7 '.45.68 40 0.87 '.6.87 50 0.97 '.67.9 -T-PC 0-40 0.64 '.9.49 40-75 0.70 '.4.6 -H 0 0.95 '.5.76 0.09 '.47.69 40.0 '.49.7 50.55 4'.5.77 -H-PC 0-40 0.96 '.9.49 40-75.05 '.4.6 -TT 0. '.5.55 0.45 '.46.69 40.6 '.5.75 50.80 '.55.79 -TT-PC 0-40.8 '.9.49 40-75.40 '.4.6 -TQ 0.05 '..4 4 0.55 '.9.6 40.65 '.6.58 50.80 '.8.59 -TQ-PC 0-40.44 '.9.49 40-75.60 '.44.66 -F 0.67 '.4.54 0.9 '.47.70 40.5 '.46.68 50.70 '.55.79 -F-PC 0-40.9 '.9.49 40-75.0 '.4.6 8' Series with 5 Trajectory 8-Q 0 0.7 7'.4.55 4 0 0.4 8'.45.68 40 0.6 9'.9.6 50 0.9 9'.9.60 8-Q-PC 0-40 0. 8'..54 40-75 0.5 8'.5.75 8-T 0 0. 7'.6.58 0 0.0 8'.6.57 40 0.6 9'.45.67 50 0.40 9'.44.66 8-T-PC 0-40 0.9 8'..5 40-75 0.5 8'.59.84 8-H 0 0.7 8'.7.47 0 0.50 8'.5.75 40 0.58 9'.56.80 50 0.65 9'.56.80 8-H-PC 0-40 0.44 8'..54 40-75 0.50 8'.5.75 8-TT 0 0.56 7'.66.9 0 0.70 8'.59.84 40 0.80 9'.6.86 50 0.88 9'.58.8 8-TT-PC 0-40 0.59 8'.4.55 40-75 0.70 8'.59.84 8-TQ 0 0.6 7'.66.9 4 0 0.76 8'.5.77 40 0.86 9'.54.78 50 0.9 9'.48.7 8-TQ-PC 0-40 0.64 8'.9.49 40-75 0.70 8'.4.6 8-F 0 0.74 7'.46.69 0.00 8'.5.75 40.6 9'.56.80 50.0 9'.56.80 8-F-PC 0-40 0.85 8'.9.49 40-75.00 8'.5.75 5' Series with 7 Trajectory 5-Q 0 0.68 4'.4.55 4 0 0.85 5'.46.69 40.04 6'.57.8 50. 6'.86.5 5-Q-PC 0-40 0.75 5'.9.49 40-75 0.8 5'.40.6 5-T 0 0.95 4'.5.75 0.0 5'.4.64 40.0 6'.57.8 50.45 6'.75.0 5-T-PC 0-40.00 5'.9.49 40-75.0 5'.4.64 5-H 0.7 '.55.79 0.65 5'.44.66 40.0 6'.5.77 50.4 6'.6.87 5-H-PC 0-40.50 5'.9.49 40-75.65 5'.4.64 5-TT 0.78 4'.8.59 0.0 5'.4.64 40.66 6'.5.74 50.84 6'.6.86 5-TT-PC 0-40.00 5'.9.49 40-75.0 5'.4.64 5-TQ 0.0 '.6.85 4 0.60 5'.49.7 40.00 6'.6.86 50.40 6'.7.98 5-TQ-PC 0-40.0 5'..5 40-75.50 5'.44.66 5-F 0.85 '.6.89 0.60 5'.55.79 40 4.0 6'.59.84 50 4.58 6'.7.00 5-F-PC 0-40.00 5'.9.49 40-75.0 5'.4.64 The Toro Company Irrigation Division An ISO 900-Certified Facility PO Bo 489 iverside, CA 950 (800) 664-4740 www.toro.com 0' Series with Trajectory 0-Q 0 0.0 9'.44.66 4 0 0.40 0'.55.79 40 0.50 '.60.85 50 0.60 '.6.86 0-Q-PC 0-40 0. 0'.8.48 40-75 0.7 0'.4.66 0-T 0 0.4 9'.5.74 0 0.5 0'.5.75 40 0.65 '.56.80 50 0.75 '.5.75 0-T-PC 0-40 0.44 0'.8.48 40-75 0.50 0'.45.68 0-H 0 0.60 9'.44.66 0 0.7 0'.8.59 40 0.85 '.6.57 50 0.99 '.4.65 0-H-PC 0-40 0.66 0'.8.48 40-75 0.75 0'.45.68 0-TT 0 0.7 9'.7.47 0 0.97 0'.4.6 40.0 '.45.67 50.9 '.4.65 0-TT-PC 0-40 0.89 0'.9.49 40-75.00 0'.45.68 0-TQ 0 0.8 9'..5 4 0.04 0'.4.55 40.0 '.4.6 50.5 '.44.66 0-TQ-PC 0-40 0.99 0'.8.48 40-75.09 0'.4.6 0-F 0. 9'.49.7 0.49 0'.44.67 40.6 '.4.6 50.85 '.48.7 0-F-PC 0-40. 0'.9.49 40-75.5 0'.46.69 Special Patterns Special Patterns Prec. adius Pressure GPM Width Length ate* 4-EST 0 0.8 ' '.0 0 0.45 4' 5'.44 40 0.5 5' 8'. 50 0.60 6' 0' 0.96 4-EST-PC 0-40 0.4 4' 5'.8 40-75 0.50 4' 5'.6 4-CST 0 0.75 ' 4'.0 0 0.90 4' 0'.44 40.04 4' 0'.67 4-CST-PC 50 0-40.6 0.86 4' 4' ' 0'.80.8 40-75.00 4' 0'.6 9-SST 0.00 9' 8'.9 0.0 9' 8'.4 40.8 9' 0'.48 50.55 0' '.6 9-SST-PC 0-40.0 9' 8'. 40-75.0 9' 8'.4 4-SST 0 0.65 4' 4'.0 0 0.90 4' 0'.44 40.04 4' '.56 50.6 5' '.5 4-SST-PC 0-40 0.88 4' 0'.4 40-75.00 4' 0'.6 -SST 0 0.08 ' 5'.54 0 0.09 ' 6'.44 40 0.0 ' 7'.8 -SST-PC 50 0-40 0. 0.09 ' ' 7' 6'.0.44 40-75 0.0 ' 6'.6 4S-SST 0 0.46 4' 7'.0 0 0.55 4' 8'.47 40 0.6 4' 9'.60 50 0.7 5' 9'.44 4S-SST-PC 0-40 0.50 4' 8'.4 40-75 0.59 4' 8'.58 adius shown in feet. * Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 55% of diameter. Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter. All performance specifications are based on the stated working pressure available at the base of the sprinkler head. Form No. 490-760 Copyright 999 The Toro Company All ights eserved April 999 LP0M499