Section 2: Big Bubba Filtration System Product Catalogue 2018 WattsIndustries.co.uk
SECTION 2 BIG BUBBA FILTRATION SYSTEM The Watts Big Bubba Filtration System comprises of a high capacity polypropylene filter housing and various depth filtration cartridges to suite your specific requirements, including the removal of sediments, discolouration, chlorine and odour. 8 T: +44 (0) 1480 407074 \ F: +44 (0) 1480 407076
BIG BUBBA FILTRATION SYSTEM SECTION 2 FILTRATION - BIG BUBBA FILTRATION SYSTEM BBH150 Big Bubba Non-Metallic Filter Housings for High Flow Rugged Construction Filter housings are made of rugged, glass-reinforced polypropylene so they will not chip, rust or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications. Low Cost Filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today s high cost of stainless steel! Applications Big Bubba Cartridge Filters are ideal for a wide range of applications, including: Whole house filtration Commercial filtration Industrial filtration Pre-filtration for reverse osmosis equipment Community water systems Sea water applications due to their non-corrosive construction Replacement for bag filters more filter area Replacement for multiple cartridge filters for greater convenience Water for livestock and poultry E-Z Change-Out Cartridge replacement is easy as 1-2-3: 1. Remove swing bolts. 2. Remove lid. 3. Rotate cartridge ¼ turn and pull-up. Proprietary Cartridges The replacement cartridge for the Watts whole house filter is totally proprietary, so you may enjoy the replacement cartridge business over the life of the equipment. Conserves Water Watts whole house filters with our proprietary pleated activated carbon cartridge conserves water because backwashing is not required, making them 100% efficient. Parallel installation Parallel installations are recommended to achieve high flow rates, by installing filters on a common manifold, feeding all filters installed in a row. Series installation Series installations are recommended for applications such as surface water filtration, where cartridges having different micron ratings are used. Low Pressure Drop Big Bubba Cartridge Filters housings are designed to minimize pressure drop, by using 2" pipe fittings and large diameter centre tubes. (See chart below for pressure drop data using pleated cartridges.) Double O-Rings For superior sealing. 15 1 µm PRESSURE DROP (PSI) 10 5 5 µm 20 µm 50 µm 150 µm 0 25 50 100 125 150 FLOW (GPM) Filter outlet. Model: BBH-150 Filter inlet. wattsuk@wattswater.com \ wattsindustries.co.uk 9
BIG BUBBA FILTRATION SYSTEM FILTRATION - BIG BUBBA FILTRATION SYSTEM Big Bubba Housing 2" The Watts Big Bubba Filter Housing is a high capacity polypropylene filter housing designed to suit for high flow rates, the filter housing is a non-metallic made from rugged, glass-reinforced polypropylene, which will not chip, rust of dent. The non-metallic construction makes this the perfect economical replacement for stainless steel filtration equipment and ideal for sea water applications or when chemical compatibility is an issue. TYPE PRODUCT CODE PIPE FITTING OVERALL HEIGHT Big Bubba Housing WWQ-BBH-150 2" 40" Replacement Depth Cartridge for Big Bubba Housing Melt blown Polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and when chemical resistance may be a requirement. TYPE PRODUCT CODE MEDIA TYPE MICRON RATING Big Bubba D1 WWQ-BBC-150-D1 PP 1 Big Bubba D5 WWO-BBC-150-D5 PP 5 Big Bubba D20 WWQ-BBC-150-D20 PP 20 Big Bubba D50 WWQ-BBC-150-D50 PP 50 Replacement Pleated Cartridge for Big Bubba Housing Ideal for more critical applications, offering greater efficiency, more surface area for greater throughput and reduced cost. TYPE PRODUCT CODE MEDIA TYPE MICRON RATING Big Bubba P1 WWQ-BBC-150-P1 PP 1 Big Bubba P5 WWO-BBC-150-P5 PP 5 Big Bubba P20 WWQ-BBC-150-P20 PE 20 Big Bubba P50 WWQ-BBC-150-P50 PE 50 Big Bubba PM150 WWQ-BBC-150-PM150 Mesh 150 Carbon Filter for Big Bubba Housing 2" Big Bubba filters are available in a range of different specifications, Pleated, Melt Blown and Activated Carbon. The difference between these and any of our other filter range is that they are bigger. They are able to cope with very high levels of turbidity and can withstand high flow rates up to 36m 3 /Hr. TYPE PRODUCT CODE MAX FLOW CAPACITY CHLORINE REDUCTION Big Bubba Carbon WWQ-BBC-150-ACP 15 GPM 140,000 Gals. 90% 10 T: +44 (0) 1480 407074 \ F: +44 (0) 1480 407076
Water Quality Catalogue-UK-W-UK UK-W-UK-03-2018-Rev0 Watts Industries UK Ltd Colmworth Business Park, Eaton Socon, St. Neots, PE19 8YX, UK T: +44 (0) 1480 407074 F: +44 (0) 1480 407076 wattsuk@wattswater.com wattsindustries.co.uk 2018 Watts