Grade 1 Heavy-Duty Mortise Locksets DORMA ML9000 MK9000
ML9000/MK9000 Series Table of Contents ML9000/MK9000 Grade 1 Mortise Locksets Features...................................... 3 Technical Details and Specifications.................. 4 How to Order................................... 5 Trim Designs ML9000 LR Lever............................... 6 ML9000 LC Lever............................... 6 ML9000 LT Lever............................... 7 ML9000 LG Lever............................... 7 MK9000 KR Knob............................... 8 MK9000 KB Knob............................... 8 Trim Options LR Lever Trim Options............................ 9 LC Lever Trim Options............................ 9 LT Lever Trim Options............................ 9 LG Lever Trim Options........................... 10 KR Lever Trim Options........................... 10 KB Lever Trim Options........................... 10 Functions Dummy Trim One Side ML9001, MK9001........... 11 Dummy Trim One Side with Lockcase ML9003, MK9003........................... 11 Dummy Trim Two Sides ML9002, MK9002........... 11 Dummy Trim Two Sides with Lockcase ML9004, MK9004........................... 11 Passage/Closet ML9010, MK9010................. 11 Exit/Communicating Passage ML9025, MK9025....... 11 Privacy, Bedroom or Bath ML9040, MK9040......... 11 Office/Entry ML9050, MK9050................... 11 Apartment ML9060, MK9060.................... 11 Classroom ML9070, MK9070.................... 12 Intruder Latch Bolt ML9071..................... 12 Holdback ML9076, MK9076..................... 12 Holdback Double Cylinder ML9077................ 12 Storeroom ML9080, MK9080.................... 12 Electrically Locked Fail Safe ML9080EL, MK9080EL... 12 Electrically Unlocked Fail Secure ML9080EU, MK9080EU....................... 12 Electrically Locked Fail Safe with Req. to Exit Switch ML9080ELRX, MK9080ELRX................... 13 Electrically Unlocked Fail Secure with Req. to Exit Switch ML9080EURX, MK9080EURX................... 13 Electrically Locked Fail Safe with Double Locking ML9082EL................................. 13 Electrically Unlocked Fail Secure with Double Locking ML9082EU................................ 13 Institution ML9082, MK9082.................... 13 Privacy with Dead Bolt ML9940, MK9940........... 13 Entry with Dead Bolt ML9953, MK9953............. 13 Corridor with Dead Bolt ML9956, MK9956........... 14 Dormitory with Dead Bolt (F11) ML9957, MK9957..... 14 Storeroom with Dead Bolt (F35) ML9958, MK9958..... 14 Cylinder Turn Dead Bolt (only) MB9960............ 14 Cylinder Blank Dead Bolt (only) MB9961........... 14 Cylinder Cylinder Dead Bolt (only) MB9962......... 14 Classroom Dead Bolt (only) MB9963............... 14 Storeroom with Dead Bolt (F14) ML9966, MK9966..... 15 Intruder Dead Bolt (F34) ML9967, MK9967.......... 15 Intruder Dead Bolt (F33) ML9968, MK9968.......... 15 Dormitory with Dead Bolt (F21) ML9973, MK9973..... 15 Storeroom with Dead Bolt ML9980................. 15 Hotel with Dead Bolt (F15) ML9985, MK9985, ML9986.. 15 Lock Options 4-7/8" Strike with Dead Bolt....................... 16 4-7/8" Strike.................................. 16 4-7/8" Strike with Dead Bolt and Auxiliary Latch........ 16 The quality management systems at the Reamstown, PA and Steeleville, IL facilities are certified to ISO-9001:2000.* *DORMA Door Controls Inc., dba: DORMA Architectural Hardware 2
ML9000/MK9000 Series Features DORMA s ML9000 and MK9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs Choose between the LR, LC, LT, or LG lever designs or select either the KR and KB knob designs. Features All DORMA 9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability. DORMA 9000 Series mortise locks provide a wide variety of functions and the most popular finishes. All DORMA 9000 Series locks include special, highstrength springs and a positive stop to eliminate unsightly sagging levers. Recommended Applications Schools and Universities Hotels Apartments Hospitals and Nursing Homes Churches Municipal Buildings Airports Retail Complexes Offices Warehouses Trims utilize 5/16" high-strength alloy steel spindles for extra durability. Select components in the 9000 Series locks are manufactured with high-strength steel or stainless steel, providing an extremely strong, highly durable lock. Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. Choice of Escutcheon or Sectional Trim Vibration-Resistant Through-Bolts Choice of Patented or Non-patented DORMA Keyway Stainless Steel Latch, 3/4" Throw Special Hardened Steel Hub Design Prevents Damage to Lock when Lever Handles are Abused 5/16" High Strength Alloy Steel Spindle Independent Exterior/Interior Lever Support Springs Choice or 4 Lever or 2 Knob Trims 3
ML9000/MK9000 Series Technical Details Technical Details: ANSI/BHMA A156.13 Grade 1 Operational Grade 1 Security U.L. listed for UL 10B/10C and UBC 7.2 (1997) Highest grade level standard for durability Highest grade level standard for strength and security U.L. and C.U.L. listed for use on 3-hour fire-rated doors and for all positive pressure applications Warranty 10-year Exceptional mechanical warranty Stainless steel latch bolt Provides strength and durability Stainless steel dead bolt Hardened steel rollers in dead bolt Security spacer between inside and outside lever hubs in lock case Steel lock case and Internal Components Provides saw resistance, strength, and durability Additional protection against sawing Protects lock from unauthorized entry and vandalism Provides physical strength and durability Certification: The DORMA ML9000 and MK9000 are U.L. and C.U.L listed, three hour fire rated. Locks are listed for A label and lesser class doors, 4'0" 8'0" maximum per leaf. Locks also listed for 1-1/2 hour rated or lesser doors, 4'0" 9'0" maximum per leaf. The DORMA ML9000 and MK9000 are certified to the operational and security requirements of ANSI/BHMA A156.13 Series 1000 Grade 1. The ML9000 meets A117.1 and ADA requirements for barrier-free accessibility. California State Fire Marshall (CSFM) approved, California State Reference code, 1989 (formerly title 19). Other Listings: MEA Cylinders and Keying: Unless otherwise specified, cylinders will be provided in DORMA standard keyway with two (2) nickel silver keys. Optional patented key system available. Refer to separate DORMA Price List for full details and options such as master keying, retrofit cylinders and keyways, and small format interchangeable cores. Adjustable face plate Full length face plate Lock chassis can be handed in the field All trim through-bolted through the lock case Accepts standard and interchangeable core cylinders Allows lock case to properly fit both flat face, standard bevel, and reverse bevel door applications Provides support for both the latch and dead bolts against forced entry Lock chassis can be handed in the field to reduce inventories or accommodate last minute door changes Provides positive alignment between the lock case and the trim Allows flexibility of using most currently available standard and interchangeable core cylinders Warranty: Ten (10) year limited warranty. Finishes: Brass: 605 (Bright) or 606* (Satin). Bronze: 611* (Bright), 612 (Satin), or 613 (Dark Oxidized Satin). Chrome: 625* (Bright) or 626* (Satin). Stainless: 629 (Bright) or 630 (Satin). *Available on lever handle locksets only. Special Finish Notes: ANSI/BHMA A156.18 standards describe 613 Dark Oxidized Satin Bronze finish as a category B finish. B category finishes, do not match from one alloy or form of material to the next and from one manufacturer to the next. The 613 finish may vary between manufacturers products and models. In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish designations in the 600-Series are the BHMA (Builders Hardware Manufacturers Association) industry standard. 4
ML9000/MK9000 Series How to Order How to Order ML9000/MK9000 Series Lever Trim Knob Trim Mortise Dead Bolt (only) ML 9 953 ML MK MB Product Type Function Hotel w/db & Indicator 986 Hotel w/db (F15) 985 Storeroom w/db Single Cylinder 980 Dormitory w/db (F21) 973 Intruder Dead Bolt (F33) 968 Intruder Dead Bolt (F34) 967 Storeroom w/db (F14) 966 Classroom (DB only) 963 Cyl. x Cyl. (DB only) 962 Cyl. x Blank (DB only) 961 1. For split finishes or split trims, consult factory. Cyl. x Turn (DB only) 960 Storeroom w/db (F35) 958 2. Available on ML Series, 626/630 finishes only. Consult factory for other finishes. Dormitory w/db (F11) 957 Corridor w/db 956 3. Example shows default values. Refer to Entry w/db 953 Lock Options section for full details. Privacy w/db 940 4. Standard door thickness is 1-3/4" (44 mm). 082 Institution Doors 1-7/8" (47 mm) and thicker can vary by Electrically Unlocked Fail Secure w/double Locking 082EU trim and function. Consult factory for these 082EL Electrically Locked Fail Safe special applications. w/double Locking Electrically Unlocked Fail Secure 080EURX w/req. to Exit Switch 5. Refer to DORMA Price List for full details. 080ELRX Electrically Locked Fail Safe w/req. to Exit Switch Electrically Unlocked Fail Secure 080EU Electrically Locked Fail Safe 080EL Storeroom 080 Holdback Double Cylinder 077 Finish 1 Holdback 076 Intruder Latch Bolt (F32) 071 630 Satin Stainless Classroom 070 629 Bright Stainless Apartment 060 626 Satin Chrome (ML9000 only) Cylinder Type Office/Entry 050 625 Bright Chrome (ML9000 only) Privacy, Bedroom or Bath 040 Conventional D 613 Dark Oxidized Satin Bronze Cylinder Exit/Communicating Passage 025 Oil Rubbed L Less Cylinder Passage/Closet 010 612 Satin Bronze Dummy Trim Two Sides w/lockcase 004 C Interchangeable Core 611 Bright Bronze (ML9000 only) Dummy Trim One Side w/lockcase 003 J Less I. Core 606 Satin Brass (ML9000 only) Dummy Trim Two Sides 002 Dummy Trim One Side 001 T Temporary I. Core 605 Bright Brass Product Family Grade 1 Mortise Lockset D LR Lever Lever Lever Lever Knob Knob LR LC LT LG KR KB Lever/Knob Design 1 A A B H M 626 AM RH 134 " Dia. Rose 2-9/16" Dia. Rose 2" x 8-1/2" Escutcheon " x 8" Escutcheon Rose/Escutcheon Design AM RH RHR LH LHR Antimicrobial Coating 2 Right Hand Right Hand Reverse Left Hand Left Hand Reverse Door Hand Door Thickness 3,4 Strike Options 3 5005 118 Lip Length 3 XXXX Keying Options Field 5 5
ML9000 Series Trim Designs The ML9000 Series ANSI/BHMA Grade 1 Heavy-Duty Mortise Locks are available in four lever trim designs. ADA compliant levers feature solid, cast handles with return to within 1/2" (12 mm) of the door face. Available Finishes*: Brass: 605 (Bright) or 606 (Satin) Bronze: 611 (Bright), 612 (Satin), or 613 (Dark Oxidized) Chrome: 625 (Bright) or 626 (Satin) Stainless: 630 (Satin) *NOTE: Trim designs are available in brass, bronze, and stainless steel. Consult the factory for details. LEVER DESIGN LR Shown with B rose and M escutcheon SFIC core available. LEVER DESIGN LC Shown with A rose 2-3/4 (70) SFIC core available. NOTE: Lever projection varies with escutcheon or rose selection. Refer to pages 9 10 for our full selection of trim options. 6
All ML9000 and MK9000 Series Locks are available with a choice of sectional or escutcheon trim. See below chart for details. Trim Description Designation Dimension In (mm) Rose A Diameter B Diameter 2-9/16 Escutcheon H Width 2 (51) Height 8-1/2 (216) M Width Height 8 (203) LEVER DESIGN LT Shown with A rose 4-5/8 SFIC core available. LEVER DESIGN LG Shown with A rose 4-3/8 SFIC core available. NOTE: Lever projection varies with escutcheon or rose selection. Refer to pages 9 10 for our full selection of trim options. 7
MK9000 Series Trim Designs The MK9000 Series Heavy-Duty Mortise Locks are available in two knob designs KB and KR knobs include steel reinforcement. Available Finishes: Brass: 605 (Bright) Bronze: 612 (Satin) or 613 (Dark Oxidized) Stainless: 629 (Bright) or 630 (Satin) KNOB DESIGN KR Shown with H escutcheon 2 (51) 8-1/12 (216) 2-3/4 (70) SFIC core available. KNOB DESIGN KB Shown with B rose 2-9/16 2-3/16 (56) SFIC core available. NOTE: Knob projection varies with escutcheon or rose selection. Refer to pages 9 10 for our full selection of trim options. 8
ML9000 Series Lever Trim Options LRA LRB LRH LRM 2 (51) 2-9/16 8-1/12 (216) 8 (203) 2-13/16 (71) LCA LCB LCH LCM 2 (51) 2-3/4 (70) 2-9/16 2-3/4 (70) 8-1/12 (216) 8 (203) 2-13/16 (71) LTA LTB LTH LTM 2 (51) 4-5/8 2-9/16 4-5/8 8-1/12 (216) 4-5/8 8 (203) 4-5/8 2-13/16 (71) 9
MK9000 Series Lever Trim Options Knob Trim Options LGA LGB LGH LGM 2 (51) 4-3/8 2-9/16 4-3/8 8-1/12 (216) 4-3/8 8 (203) 4-3/8 2-13/16 (71) KRA KRB KRH KRM 2 (51) 2-9/16 8-1/12 (216) 2-3/4 (70) 8 (203) 2-9/16 KBA KBB KBH KBM 2 (51) 2-3/16 (56) 2-9/16 2-3/16 (56) 8-1/12 (216) 8 (203) 2-3/4 (70) 2-3/16 (56) 2-9/16 2-3/16 (56) 10
ML9000/MK9000 Series Functions FUNCTION SERIES OUTSIDE/INSIDE DESCRIPTION Dummy Trim One Side ML9001 MK9001 ML9003 MK9003 (w/lockcase) Used as pull or matching trim on pairs of doors. Dummy Trim Two Sides ML9002 MK9002 ML9004 MK9004 (w/lockcase) Used as pull or matching trim on pairs of doors. Passage/Closet ML9010 MK9010 Latch bolt operated by trim either side. F01 Exit/ Communicating Passage ML9025 MK9025 Latch bolt operated by inside trim. Blank trim or no outside trim. F31 Privacy, Bedroom or Bath ML9040 MK9040 trim locked by inside turn. When locked, outside trim unlocked by inside trim, by closing door, or by emergency release. F22 Office/Entry ML9050 MK9050 trim locked by stopworks. When outside trim locked, latch bolt retracted by key outside or operated by inside trim. F04 Apartment ML9060 MK9060 trim locked by key inside. When outside trim locked, latch bolt retracted by key outside or by inside trim. F09 Indicates SFIC Core available. Indicates rigid lever. 11
ML9000/MK9000 Series Functions FUNCTION SERIES OUTSIDE/INSIDE DESCRIPTION Classroom ML9070 MK9070 trim locked by key outside. When outside trim locked, latch bolt operated by inside trim. F05 Intruder Latch Bolt ML9071 trim locked by key either side. When outside trim locked, latch bolt operated by key either side. Holdback Holdback Double Cylinder ML9076 MK9076 ML9077 F32 F06 trim locked by key outside. Latch bolt can be locked in a retracted position by key. When outside trim locked, latch bolt operated by inside trim, unless latch bolt has been locked in retracted position. trim locked by key either side. Latch bolt can be locked in a retracted position by key. When outside trim locked, latch bolt operated by inside trim, unless latch bolt has been locked in retracted position. Storeroom ML9080 MK9080 Latch bolt retracted by key outside or operated by inside trim. Outside trim always inoperable. F07 Electrically Locked Fail Safe ML9080EL MK9080EL Outside trim locked when power is on. Outside trim unlocked when power is interrupted. Latch by key outside. Inside trim always unlocked. EL Electrically Unlocked Fail Secure ML9080EU MK9080EU Outside trim unlocked when power is on. Outside trim locked when power is interrupted. Latch by key outside. Inside trim always unlocked. EU Indicates SFIC Core available. Indicates rigid lever. 12
FUNCTION SERIES OUTSIDE/INSIDE DESCRIPTION Electrically Locked Fail Safe with Req. to Exit Switch ML9080ELRX MK9080ELRX ELRX Outside trim locked when power is on. Outside trim unlocked when power is interrupted. Latch by key outside. Inside trim always unlocked. Operating inside trim cycles SPDT switch to signal use of the door. Electrically Unlocked Fail Secure with Req. to Exit Switch ML9080EURX MK9080EURX EURX Outside trim unlocked when power is on. Outside trim locked when power is interrupted. Latch by key outside. Inside trim always unlocked. Operating inside trim cycles SPDT switch to signal use of the door. Electrically Locked Fail Safe with Double Locking ML9082EL Outside and inside trim locked when power is on. Outside and inside trim unlocked when power is interrupted. Latch by key either side. EL Electrically Unlocked Fail Secure with Double Locking ML9082EU Outside and inside trim unlocked when power is on. Outside and inside trim locked when power is interrupted. Latch by key either side. EU Institution ML9082 MK9082 Latch bolt operated by key either side. Trim both sides always rigid. F30 Privacy with Dead Bolt ML9940 MK9940 Latch bolt operated by trim either side, except when projected dead bolt locks outside trim and deadlocks latch. Dead bolt operated by turn inside. Dead bolt operated by emergency release outside. Inside trim operates both bolts simultaneously and unlocks outside trim. F19 Entry with Dead Bolt ML9953 MK9953 F20 Latch bolt operated by trim either side, except when outside locked by stopworks. Dead bolt operated by key outside or turn inside. Key operates both dead bolt and latch bolt. Inside lever operates both bolts; outside trim remains locked. Latch bolt deadlocked when outside lever locked, or dead bolt projected. When dead bolt retracted, outside trim unlocked by stopworks. Indicates SFIC Core available. Indicates rigid lever. 13
ML9000/MK9000 Series Functions FUNCTION SERIES OUTSIDE/INSIDE DESCRIPTION Corridor with Dead Bolt ML9956 MK9956 Latch bolt operated by trim either side, except when projected dead bolt locks outside trim and deadlocks latch. Dead bolt and latch retracted by key outside. Dead bolt projected by turn inside or key outside. Inside trim operates both bolts and unlocks outside trim. F13 Dormitory with Dead Bolt ML9957 MK9957 Latch bolt is retracted by trim either side, except when outside trim is locked either by stopworks or projected dead bolt. Dead bolt is projected by key either side. Dead bolt deadlocks latch bolt. Inside trim operates both bolts and unlocks outside trim. F11 Storeroom with Dead Bolt ML9958 MK9958 trim locked by stopworks. Dead bolt operated by key either side. Latch bolt operated by inside lever. F35 Cylinder Turn Dead Bolt (only) MB9960 Dead bolt operated by key outside or by turn inside. F17 Cylinder Blank Dead Bolt (only) MB9961 Dead bolt operated by key outside only. F18 Cylinder Cylinder Dead Bolt (only) MB9962 Dead bolt operated by key either side. F16 Classroom Dead Bolt (only) MB9963 Dead bolt operated by key outside. Turn inside retracts but does not project dead bolt. F29 Indicates SFIC Core available. Indicates rigid lever. 14
FUNCTION SERIES OUTSIDE/INSIDE DESCRIPTION Storeroom with Dead Bolt ML9966 MK9966 Latch bolt operated by trim either side. Dead bolt operated by key either side. F14 Intruder Dead Bolt ML9967 MK9967 trim locked by key either side. Dead bolt operated by key either side. Inside trim operates both bolts and unlocks outside trim. Latch bolt deadlocked when dead bolt thrown. F34 Intruder Dead Bolt ML9968 MK9968 trim locked by key either side. Dead bolt operated by key either side. Inside trim retracts both bolts and unlocks outside trim. F33 Dormitory with Dead Bolt ML9973 MK9973 Latch bolt operated by trim either side. Dead bolt operated by key outside or by turn inside. F21 Storeroom with Dead Bolt ML9980 Latch bolt operated by key outside or by trim inside. Outside trim always rigid. Dead bolt projected by key outside or by turn inside. Inside trim operates both bolts simultaneously. Auxiliary latch or dead bolt deadlocks latch bolt. Hotel with Dead Bolt ML9985 MK9985 ML9986 (w/indicator) F15 Latch bolt operated by key outside or trim inside. Outside trim always rigid. Latch bolt retracted by key outside. Dead bolt projected by turn inside, and all keys, except emergency key, are shut out. Inside trim operates both bolts simultaneously. Auxiliary latch or dead bolt deadlocks latch bolt. Indicator button projects when dead bolt is projected (ML9986). Indicates SFIC Core available. Indicates rigid lever. 15
ML9000/MK9000 Series Lock Options 4-7/8" Strike w/dead Bolt 4-7/8" Strike 4-7/8" Strike with Dead Bolt and Auxiliary Latch 5002 ANSI 1-1/4" 4-7/8" curved lip strike. 1-1/8" lip length. Default strike for all 9000 Series locks with dead bolts except ML/MK9953, 9967, 9980, 9985, and 9986 locks (use strike 5005). Includes dust box. 5003 ANSI 1-1/4" 4-7/8" curved lip strike. 1-1/8" lip length. Handed RH and LH default strike for 9000 Series locks without dead bolts. Includes dust box. 5005 ANSI 1-1/4" 4-7/8" curved lip strike. 1-1/8" lip length. Handed RH and LH default strike for ML/MK9953, 9967, 9980, 9985, and 9986 Series locks. Includes dust box. DORMA Group North America www.dorma-usa.com DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 17567-0411 Telephone: (800) 523-8483 Facsimile: (800) 274-9724 E-mail: archdw@dorma-usa.com DORMA Canada 1680 Courtney Park Drive, Unit 13 Mississauga, Ontario L5T 1R4 Telephone: (800) 387-4938 Facsimile: (905) 670-5850 E-mail: sales@dormacanada.com DORMA Mexico, S. de R.L. de C.V. Astrónomos 28, Col. Escandón México, D.F. 11800 Del. Miguel Hidalgo Telephone: (52+55) 5272-6937 Facsimile: (52+55) 5272-6948 E-mail: operacion@dorma.com.mx Subject to change without notice. 10.09CT 3M USA 07000329