Bronto Skylift Aerial Work Platforms For wind turbine inspection and maintenance
Designed for superior performance and safety Bronto Skylift offers a wide selection of high-reach truck-mounted aerial work platforms for wind turbine inspection, maintenance, repair and cleaning. Some of the traditional methods, can be considered more time consuming and hazardous, especially under windy conditions. For over 40 years, we have supplied insulated and noninsulated truck-mounted work platforms around the world. The safety features have been optimized by continuous development and time-tested in the toughest conditions. With our machines you can get where you need to be, and return home safely. Bronto Skylift unit can be driven to the site and it s fully stabilized with one-button automatic levelling within minutes. With integrated water tank, pump and a high-pressure water supply in the cage the washing can be done easily. Electricity and hydraulic power enable various tools to be used and material handling solutions may replace the need for a crane. All this makes working faster, easier, safer and ultimately more efficient. Products for wind power The HLA High Level Articulated range represents the ultimate in high rise access. Its optimized height to weight ratio enables maximum vertical and horizontal outreach without impairing the manoeuvrability and drivability of the vehicle. This range features the world s highest truck mounted work platform of 367 ft (112 m). The XDT extra Duty Telescopic range offers telescopic cage boom, increased working load and a compact design make the work at heights more efficient, easier and much safer. The XR Extreme Reach range provides light, compact units with the latest, advanced technology.
Designed to enhance operational performance, safety and efficiency at challenging heights and environments. Mobile unit can be driven on site Fully ready and stabilized within minutes Integrated electricity, air pressure and water connection to the cage Spacious and versatile working cage with various options available
HLA range key features Working heights 255-367 feet, outreach up to 104 feet One button automatic levelling Spacious and versatile working cage with up to capacity Integrated washing line available as an option Integrated generator, hydraulics and lighting available as an option
High Level Articulated ultimate high rise access The HLA range ensures efficient and safe operations with extremely challenging high rise installations like antennas, generators and windmills. Enourmous outreach even at great heights, fast and convenient movements and quick deployment guarantee the maximum working efficiency and return of investment. Unit Max. working height Max. working outreach Max. working load Up-andover capacity Transport height Transport length Typical GVW S255HLA 255 ft (78 m) 98 ft (30 m) 86 ft (26.3 m) 13 ft (4 m) 51 ft (15.8 m) 105,900 lbs (48 t) S295HLA 295 ft (90 m) 104 ft (32 m) 78 ft (24 m) 13-5 ft (4 m) 50 ft (15.5 m) 105,000 lbs (48 t) S341HLA 341 ft (104 m) 104 ft (32 m) ) 81 ft (25 m) 13-5 ft (4 m) 55 ft (16.9 m) 138,900 lbs (63 t) S367HLA 367 ft (112 m) 104 ft (32 m) 85 ft (26 m) 13 ft (4 m) 62 ft (19 m) 166,000 lbs (75 t)
XDT & XR range key features Working heights 150-230 feet, outreach up to 118 feet One button automatic levelling, easy and precise control system Spacious and versatile working cage with up to capacity Telescopic cage boom for more overall reach (XDT) Sky-jib with automatic or manual operation (XR) Compact design with extreme reach
Extreme Reach & extra Duty Telescopic More overall reach The XR range has less weight and lower fuel consumption as well as more working envelope per GVW tonne, yet they are lighter and more compact units for easy maneuverability. The XDT range has all the key features required from a trusted aerial work platform; outreach limitation system, telescopic cage boom, increased working load and compact design. Unit Max. working height Max. working outreach Max. working load Up-andover capacity Transport height Transport length Typical GVW S150XDT 150 ft (46 m) 82 ft (25 m) 38 ft (11.5 m) 12-8 ft (3.85 m) 33 ft (10 m) 40,000 lbs (18 t) S173XDT 173 ft (53 m) 115 ft (35 m) 38 ft (11.5 m) 12-8 ft (3.85 m) 39 ft (11.9 m) 58,000 lbs (26 t) S230XDT 230 ft (70 m) 118 ft (36 m) 38 ft (11.5 m) 13-4 ft (4.06 m) 40 ft (12.2 m) 79,500 lbs (36 t) S230XR 230 ft (70 m) 121 ft (37 m) 56 ft (17 m) 13-4 ft (4.06 m) 39 ft (12 m) 70,500 lbs (32 t)
BRONTO OPTIONS for Wind turbine maintenance Extendable Cage Can be extended up to 12 ft (3.7m) Clear front wall, easy access to the target Movable control center Various options to make your office in the sky even better Bronto CW-400 Load up to 881 lbs (400 kg) Hydraulically operated, independent from external power sources +/- 45 deg. slewing and extendable lifting jib Fold out feet for lifting Rugged platforms with various options Bronto units have been time-tested in the toughest conditions. When elevated, they can withstand winds speeds up to 12.5m/s as a standard and with customization even more. The Bronto platform can be telescoped next to the blades carrying the required personnel and equipment. Bronto platforms can lift up to of men and materials to the sky. With optional extendable working cage the capacity is 1 323 lbs (600 kg) and it can be extended up to 12 ft (3.7 m) wide. Easy to operate 881 lbs (400 kg) Bronto Cage Winch can replace the need for a separate crane when lifting components to the turbine/blades. Thus it may double the efficiency of your operation
Where ever you are we back you up With Bronto Skylift service tools you can keep your machines running with the best possible rate; maximize up time, reduce maintenance costs and keep the platforms resale value. Our connection management system enables communication between the platform s control system and the server located in Finland ovet the internet. COMPASS - remote support Bronto Compass is an advanced remote support and diagnostic tool. Our service personnel can open a real time remote connection to the platform. It enables adjustment of various settings, calibration, analyzing and fault finding. With this tool faults and their causes can be rapidly identified, analyzed and corrected, which helps limit downtime and reduce unnecessary costs. SKYLIFTFLEET - manage your platform(s) With this clever fleet management system you have access to all the important data for your machine. Operational hours, outreach analyzing, maintenance schedules, service bulletins, manuals and instructions are all within the system. You can also set and follow the operating rate of your units and analyze the overall efficiency of the usage. POINTR - visual, real time guide tool Bronto POINTR enables remote collaboration between you and our service team on-line through augmented reality. It provides live video streaming, voice chat and real time annotations. It enables visual instructions, easy communication and thus fast problem solving on site. This easy to use mobile app can be downloaded to Android and ios devices.
The heart of Bronto units, Bronto+ All Bronto Skylift HLA, XDT and XR units have the same electronic control system, The Bronto+. It offers fully variable outrigger placement and variable cage load with automatically optimized outreach. The system guarantees smooth operation for all boom movements and a very reliable outreach calculation based on selected jacking position. All these features make the wind turbine work more convenient and safe. The XR range has the newest version of this easy to use control system, the 5th generation. With it s touch screens, easy navigation and modifiable menu it represents the most advanced control system technology. All versions of Bronto+ control system make sure that you have a reliable working machine that is ready to serve you in real life operations.
Bronto Skylift is the global market leader in truck-mounted hydraulic platforms. We design, manufacture, sell and service appliances for rescue and firefighting, as well as for construction work. Our product range includes approximately 50 models between with a range of 17 to 112 meters working height. The advanced modularity also allows numerous client-specific modifications. During the past 50 years, we have delivered over 6,700 platform units to fire brigades and industrial customers throughout all continents in more than 120 countries. Our headquarters and production plants are situated in Finland. We also have subsidiaries in Germany, Sweden, Switzerland and the USA. The company is a part of Japan-based Morita Holdings Corporation. www.brontoskylift.com e-mail: sales@brontoskylift.com Technical data and illustrations subject to change without notice. Bronto Skylift, VER1 US 2017