truck and Construction Equipment Range August 2014 www.facebook.com/motul www.youtube.com/motul www.motul.com
DIESEL ENGINE LUBRICANTS 100% SYNTHETIC TechnoSynthese FULL SAPS Fuel Economy Tekma Optima 5W30 Suitable for the latest generation of low emission turbocharged Diesel engines (Euro II, Euro III, Euro IV), fitted with EGR and SCR. Specially recommended for recent fleets with high technology engines and with Long Drain Intervals. Fuel Economy. Standards: ACEA E4 / E7 (E5 / E3) Tekma Ultima Suitable for the latest generation of low emission turbocharged Diesel engines (Euro II, Euro III, Euro IV), fitted with EGR and SCR and high power. Standards: API CF, ACEA E4 / E7 (E5 / E3) LOW SAPS Low SAPS Tekma Ultima+ 5W30 Tekma Ultima+ Low SAPS lubricants. For turbocharged or direct injection Diesel engines meeting Euro II, Euro III, Euro IV or Euro V emission regulations, fitted with EGR and/or SCR systems and with or without DPF, working in high severe conditions of load and service. Standards for Tekma Ultima+ 5W30: API CJ-4, ACEA E4 / E6 / E7 (E5 / E3) / E9 Standards for Tekma Ultima+ : API CI-4 / CH-4, ACEA E4 / E6 / E7 (E5 / E3) JASO DH-2 Mineral Tekma Mega For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3) Tekma Supra For low emission naturally aspirated or turbocharged Diesel engines (Euro II, Euro III). Standards: API CG-4, ACEA E2 FULL SAPS Tekma Mega X «Super High Performance Diesel» For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing both outstanding resistance at high temperature, easier flowing at cold temperature and longer lubricant life. Improves wear protection at cranking and fuel economy at frequent start ups. Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3) Tekma Mega X «Super High Performance Diesel» Reinforced lubricant intended for use in engines running in warm climates and severe conditions. For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing outstanding resistance at high temperatures and longer lubricant life time. Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3) Tekma Mega X LD «Super High Performance Diesel» Reinforced lubricant (TBN 15) intended for use in engines running with high sulfur content fuels (up to 1,5%) in warm climates and severe conditions. For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing outstanding resistance at high temperatures and longer lubricant life time. Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3) LOW SAPS Tekma Mega X LA Low SAPS lubricant. For turbo Diesel engines with DPF. Designed for last generation of engines. Euro II, Euro III, Euro IV or Euro V emission regulations compliant, fitted with EGR and/or SCR Systems with or without DPF Standards: API CI-4, ACEA E6 / E7 (E5 / E3) Tekma Norma + Tekma Norma + 20W50 For naturally aspirated or turbocharged Diesel engines (Euro I, Euro II). Standards for : API CF-4 / CF / CD / SF Standards for 20W50: API CF-4 / CF / CE / CD / SF Tekma Norma+ Monograde SAE 30 / 40 For naturally aspirated or turbocharged Diesel engines. Standards: API CF-4 / CF / CE / CD / SF Tekma Futura+ 10W30 Tekma Futura+ Low SAPS lubricants. For turbocharged or direct injection Diesel engines meeting Euro II, Euro III, Euro IV or Euro V emission regulations, fitted with EGR and/or SCR systems and with or without DPF, working in high severe conditions of load and service. Standards: API CJ-4, ACEA E9 / E7 (E5 / E3) Tekma Norma 10W For hydraulic systems, hydrostatic transmissions and torque convertors. Zinc content above 900 ppm. Standards: API CF / SF Tekma Diesel 2T (SAE 40) Specially formulated for DETROIT 2 STROKE DIESEL engines which require API CF-2 or CD-2. Standards: API CF-2 / CF Specifications: MIL-L-2104 D
TRANSMISSION LUBRICANTS MECHANICAL / SEMI-AUTOMATIC TRANSMISSIONS 100% SYNTHETIC Gear Synt TDL 75W90 Specially designed for mechanical transmissions and long drain service. API GL-5 / MT-1, MIL-L-2105E, MAN M3343 Typ S (3343 SL), MB 235.8, ZF TE-ML 02B / 05B / 07A / 08A / 12B / 16F / 17B / 19C / 21B, SCANIA ST0 1:0 (Transmission) TechnoSynthese Motylgear LD 75W80 Specially recommended for heavy loaded gearboxes and long drain service. API GL-4, MAN 341 TL, ZF TE-ML 02D, VOLVO 97305 / 97307, EATON (Extended drain), RENAULT VI Motylgear 80W140 For all mechanical transmissions, synchronised or non synchronised gearboxes, gearboxes/differential, transfer gearboxes and hypoid differentials without limited slip system operating under very heavy loads. API GL-4 / GL-5, MIL-L-2105D AUTOMATIC TRANSMISSIONS / CONVERTERS Multi ATF Technosynthese lubricant high performance. GENERAL MOTOR DEXRON III G / III H / II D / II E, FORD MERCON / MERCON V & SP, JASO 1A, ATF +3 / +4, DIAMOND ATF J2 / SP II / SP III / PSF 3, VOITH G607, ZF TE-ML 03D / 04D / 09 / 14A / 14B / 16L / 17C, RED-1, JWS 3309 Dexron III For all systems where DEXRON or MERCON standard is required. MAN 339 Typ Z-1 & V-1 (339F), ALLISON C4, 236.5 / 236.9, VOITH 55.6335.32 (G607), ZF TE-ML 03D / 04D / 14A / 17C, CATERPILLAR TO-2 GENERAL MOTOR DEXRON III G, FORD MERCON Dexron IID For all systems where DEXRON II standard is required. MAN 339 Typ Z-1 et 339 Typ V-1 (339D), 236.7, VOITH 55.6335.32 (G607), ZF TE-ML 03D / 04D / 11A / 14A / 17C, GENERAL MOTOR DEXRON II D, ALLISON C4, CATERPILLAR TO-2 Transmission Fluid A For all systems where GENERAL MOTORS ATF type A standard is required. GENERAL MOTORS ATF Type A, ALLISON C4 Mineral Gear MB 80W Specially designed for truck gearboxes: Mercedes Benz, MAN or ZF (Ecolite, Ecomid, Ecosplit, Astronic 1&2 without Intrader). API GL-4, 235.1, MAN 341 Typ Z1 et Typ E1 (341N), ZF TE-ML 02A / 17A Trans MB 85W90 For gearboxes, differentials and reduction gear. API GL-5, 235.0, MAN 342 Typ M-1, ZF TE-ML 16A/16B/16C / 17A/17B/ 19A/19B /21A HD 80W90 For all mechanical transmissions, synchronised or non synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under very heavy loads. API GL-4 / GL-5, MIL-L-2105D HD 85W140 For all mechanical transmissions, reduction gears and hypoid differentials without limited slip system operating under very heavy loads. API GL-4 / GL-5, MIL-L-2105D, VOLVO 97310, ZF TE-ML 05A / 07A / 08A / 12A / 16C / 16D / 17B EPL 90 All gearboxes, gearbox/differential and hypoid differentials without limited slip system operating under moderate loads and revolution speed. API GL-4, MIL-L 2105, MAN 341 Typ N, ZF TE-ML 16A / 17A MTO-4 10W - 30 & 50 Specially designed to meet CATERPILLAR TO-4 specification. Transmission lubricant CATERPILLAR : CAT TO-4 & TDTO. API GL-1 / GL-2 /GL-3 90 PA Specially formulated for limited-slip differentials. API GL-4 / GL-5, MIL-L-2105D TRANSMISSIONS WITH WET BRAKES TRH 97 Specially formulated for farming machines transmissions, gearboxes, rear axle, hydraulic liter systems and wet brakes. JOHN DEERE J20C J20D, NEW HOLLAND FNHA-2-C-201.00, JI CASE MS 1210 / MS 1209 / MS 1207 / MS 1206 / MS 1205 / MS 1204 / IH B6, FORD M2C 86 B/C / M2C 134 D / M2C41-B / M2C48-B / M2C53-A, MASSEY FERGUSON MF 1110 / MF 1127 / MF 1129 A / MF 1135 / MF 1141 / MF 1143, ALLISON C4, CATERPILLAR TO-2, WHITE FARM Q-1826 / Q-1802 / Q-1766 / Q-1705 TRH 100 Specially formulated for farming machines transmissions, gearboxes, rear axle, hydraulic liter systems and wet brakes which are working in extreme conditions. FORD M2C 86 A, MASSEY FERGUSON MF 1135
HYDRAULIC LUBRICANTS Rubric Bio 46 Biodegradable hydraulic oil, fully synthetic, with antioxidation, anti-wear and anti-corrosion properties used under severe conditions. ISO VG 46. Biodegradability over 90% according to CEC L33 A93 and 89% on ISO 9439. European Eco-label DE/027/027, Blue Angel N 18724, Bosch Rexroth RE 90221-01 GREASES MULTIPURPOSE Tech Grease 300 Very high performance multipurpose grease. Technosynthese formulation based on complex lithium soap, with extreme-pressure, antiwear, anti-oxidation and anti-corrosion additivation. Top Grease 200 Multipurpose grease lithium soap-based with reinforced anti-wear additivation. For the greasing of parts that are subjected to loads. Very good adhesive properties. Extreme pressure additive. Multigrease 150 Multipurpose lithium soap-based grease for the greasing of all parts. Extreme pressure additive. Grease 100 Multipurpose lithium soap-based grease for greasing under normal duty conditions. Rubric Bio 46 S 100% synthetic and biodegradable hydraulic oil, based on high performance saturated Ester. Speciallly designed for hydraulic systems working under severe conditions. ISO 15380 HEES European Eco-label UK/27/006, Bosch Rexroth RE 90221-01 WATER RESISTANCE AND ADHESIVENESS TP Agri Lithium soap-based grease specially designed for public works and agricultural applications. Highly adhesive multi-purpose product for greasing of parts used in heavy duty conditions and/or working in wet environment. Extreme pressure additive. SEVERE CONDITIONS Molybden Multipurpose lithium soap- and molybdenumbased grease for intensive use in construction applications. Extreme pressure additive MoS2. WHEEL BEARINGS Roulement PL Thick lithium soap-based grease specially recommended for greasing of truck wheel bearing. Consistency NLGI 3 CENTRAL LUBRICATION Soft grease 0 Soft lithium soap-based grease for gearbox casings. Extreme pressure additive. Consistency NLGI 0 GC grease 00 Fluid lithium soap-based grease specially formulated for central lubrication. Extreme pressure additive. Consistency NLGI 00 / 000 Sellette Grease Sellette Lithium soap-based grease specially formulated to lubricate semi-trailer fifth wheels. Enhanced antiseizing properties (graphite). MULTIFUNCTIONAL LUBRICANTS MULTIFUNCTIONAL LUBRICANTS TP Super Synt Multipurpose lubricant reinforced with a synthetic base stock Technosynthese. Meets the latest requirements of construction equipment manufacturers. Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical transmissions, hydraulic systems, wet brakes, clutches and compressors. API CF-4 / CH-4 / SF, ACEA E5 Performances: Refer to summary chart Multisynthese Universal Multipurpose lubricant reinforced with a synthetic base stock Technosynthese. Meets the latest requirements of construction equipment manufacturers. Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical transmissions, hydraulic systems, wet brakes, clutches and compressors. Performances: Refer to summary chart Rubric HV 22 / 32 / 68 For hydraulic systems working under severe conditions. NFE 48 603 HV, ISO 11158 catégorie HV, ISO 6743-4 catégorie HV, DIN 51524 HVLP Rubric HV 46 Ambient Anti-wear hydraulic oil. Very high viscosity index. ISO VG 46. NFE 48 602 HV / NFE 48 603 HV, DIN 51524 HVLP, DENISON HF-0, CINCINNATI MILACRON P 70, CASE POCLAIN P 110 32-03J, VICKERS V 104 C / 35 VQ 25, ISO III58 Catégorie HV Rubric HM 32 / 46 / 68 / 100 All types of hydraulic systems. 4 viscosity grades: ISO VG 32 / VG 46 / VG 68 / VG 100 NFE 48 603HM, DIN 51 524 HLP, DENISON HF-0, CINCINNATI MILACRON P 70, VICKERS V 104 C / 35 VQ 25 DS Universal Multigrade 10W30 / 20W40 Specially formulated for non turbocharged Gasoline and Diesel engines. Transmissions without wet brakes and hydraulic lifter systems. API CC / SE / GL-4 Performances: Refer to summary chart The colours references are corresponding to the products colours COMPRESSOR LUBRICANTS Vis 32 / 46 Rotary air compressor lubricant, wear protection, anti-foam. ISO VG 32 / 46 Alterna 100 / 150 Reciprocating air compressor or vacuum pumps lubricant, wear protection, antifoam. ISO VG 100 / 150
DIESEL ENGINE LUBRICANTS MANUFACTURERs APPROVALS & SPECIFICATIONS CAT CUMMINS DAF DEUTZ IVECO MACK MAN MB- Approval MTU RVI SCANIA VOLVO Tekma Optima 5W30 72-76-77 HP-1 HP-2 DQC-IV 18-1804 FE EO-M PLUS M3277 228.5 Type III RXD VDS-3 Tekma Ultima CES 20072 DQC-III M3277 228.5 Type III RLD-2 LDF-3 VDS-3 Tekma Ultima + 5W30 ECF-3 CES 20081 DQC-IV LA EO-O PREMIUM PLUS M3477 M3271-1 M3575 228.51 Type 3.1 RLD-3 VDS-4 Tekma Ultima + ECF-1a Long Drain DQC-IV LA M3477 M3271-1 228.51 & 235.27 Type 3.1 RLD-2 Low Ash VDS-3 Tekma Mega X ECF-1 M3275 Type II RLD-2 LDF-2 VDS-3 Tekma Mega X ECF-1 72-76-77-78 EO-M PLUS M3275 Type II RLD-2 VDS-3 Tekma Mega X LD ECF-1 72-76-77-78 EO-M PLUS M3275 MB- Type II RD RD-2 RLD RLD-2 VDS-3 Tekma Mega X LA CES 20076-77 Long Drain DQC-III LA M3477 M3471-1 228.51 Type 3.1 RLD-2 RXD RGD VDS-3 Tekma Futura + 10W30 ECF-2 ECF-3 ECF-1a CES 20081 DQC-III-10 EO-O PREMIUM PLUS M3575 MB-1 RLD-3 VDS-4 Tekma Futura + CES 20081 DQC-III LA EO-M PLUS EO-O PREMIUM PLUS M3575 MB-1 RLD-3 VDS-4 Tekma Mega ECF-1 72-76-77-78 M3275 Type II RLD-2 VDS-3 Tekma Supra EO-L M271 Type I E2R VDS Tekma Norma+ & 20W50 228.1 Tekma Norma+ Monograde 30 / 40 228.0 MULTIFUNCTIONAL LUBRICANTS MANUFACTURERs PERFORMANCES CAT MIL-L GM ZF-TE-ML NEW HOLLAND FORD MASSEY FERGUSON MB JOHN DEERE TP Super Synt TO2 Allison C4 06B / 06C / 07B M2C 159 B 30 / 40 MF 1139 & 1144 227.1 JDM 27 Multisynthese Universal DS Universal Multigrade 10W30 / 20W40 TO2 Allison C4 06B / 06C / 07B MIL-L- 2104 B & 2105 M2C 159 B 30 / 40 MF 1139 & 1144 227.1 JDM 27 The lubricant recommendations for each vehicule are available on the website www.motul.com
Maintenance BRAKE FLUIDS Dot 5.1 Brake Fluid Long-life 100% synthetic fluid for all types of hydraulic brakes and clutches. Dry boiling point: 272 C (522 F) Wet boiling point: 185 C (365 F) Standards: FMVSS 116 DOT 3, DOT 4, DOT 5.1, SAE J 1703, SAE J 1704, ISO 4925 (5.1, 3&4) Dot 3 & 4 Brake Fluid 100% synthetic fluid for all types of hydraulic brakes and clutches. Dry boiling point: 245 C (473 F) Wet boiling point: 158 C (316 F) Standards: FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704, ISO 4925 (3&4) COOLANTS Inugel Optimal Inugel Expert Ready to use Long-life organic technology. High protection down to -37 C / -35 F. Performances: BS 6580, MAN 324 Typ SNF, Renault Trucks 41.01-001 / --Type D, DAF 74002 Inugel Expert Ultra Inugel Optimal Ultra Concentrated formula Long-life organic technology. High protection down to -54 C / -65 F. Dilution from 33% to 60%. Performances: BS 6580, MAN 324 Typ SNF, Renault Trucks 41.01-001 / --Type D, DAF 74002 Inugel Classic Ready to use. Hybrid technology. Anti-corrosion and anti-freeze. This product can be mixed with almost all monoethyleneglycol based coolants. Protection down to -37 c / -35 F. Performances: BS 6580, AFNOR NFR 15-601, JASO M325, SAE J1034, MAN 324 Typ NF, Volvo Trucks 128 6083/002, IVECO 18-1830 Concentrated formula. Hybrid technology. Anti-corrosion and anti-freeze. This product can be mixed with almost all monoethyleneglycol based coolants. Protection down to -54 c / -65 F. Dilution from 33% to 60%. Performances: BS 6580, AFNOR NFR 15-601, JASO M325, SAE J1034, MAN 324 Typ NF, Volvo Trucks 128 6083/002, IVECO 18-1830 Ready to use Anti-corrosion and anti-freeze. Protection down to -25 C / -13 F. CLEAN AND SHINE Diesel System Clean Superior engine output. Cleaner specially designed for the fuel systems of Diesel engines. Reinforced action on valves, carburettors, injectors and combustion chambers. 300ml Engine System Clean Add to the oil before drain. Cleans and protects the engine. Decreases oil and fuel consumption. Improves compression. 300ml Vision Expert Ultra Concentrated windshield washer Adapt dilution to required protection. Exclusive formula degreases and removes dirt from the windshield. Vision Classic -20 C Ready to use windshield washer. Degreases and removes dirt from the windshield. Dries without leaving any mark. Freezing protection for washer system and tank protection (-20 c / -4 F). E.Z. Lube Multi Protect Multi protection Multi-use lubricant and anti-corrosion fluid. Creates a reinforced anti-corrosion protective film. mb2 project - 202571- Stéphane ADAM - August 2014 MOTUL 119 Bd Félix Faure - 93300 Aubervilliers France Tel +33 (0) 1 48 11 70 00 - Fax. +33 (0) 1 48 33 28 79 Contact : info@motul.com www.motul.com