mvjvi cwi vi Av jv cwiqbœ Rxeb
Solar Charge Controller 3 years warranty Model: CR-10A12 (12V, 10A Solar charge controller) Approved by IDCOL The "contromax" is a unique small solar photovoltaic charge and discharge controller in MSI Technology s product range, specially designed for cost effective. The is extremely power-efficient due to its very low voltage drop over both input and output switching MOSFET. Unique features includes a two stage blinking LED to remind user the SOC (State of charge) as it gets close to LVD (Low Voltage Disconnect). A SOC indicator of microcontroller based solar charge controller gives clear indication of the battery status. Also this controller highly protects the deep discharge of battery. Display indicators: Battery status (High indicator LED): LED ON at Battery high, LED blink at Battery charge full Battery status (Medium indicator LED): LED ON at Battery medium Battery status (Low indicator LED): LED ON at Battery Low, LED blink at near LVD, LED faster blink at very close to LVD Load off indicator LED: LED ON after LVD occurs Charging LED: LED ON when charging, LED blinking when PWM status, LED OFF at charge full status. Short circuit / Overload LED: LED blinking if short circuit occurs at load terminals or load greater than 10A Electronic protection: Short circuit protection at load terminal Overcharging protection using PWM & full off Over discharging protection (LVD) Reverse polarity protection of Solar Modules Reverse polarity protection at battery terminal Reverse current protection at night Technical Specification: Model CR-10A12 System voltage 12V DC Maximum module input short circuit current 10A Maximum load output short circuit current 10A High voltage disconnect set point (HVD) 14.30V - 0.10V Float charge 13.90V - 0.10V Low voltage disconnect set point (LVD) 11.60V - 0.10V Load reconnect set point (LVR) 12.60V 0.10V -
( Power Solar charge controller ) Available ratings: Model 20A 30A 40A 50A 60A 80A 12V CR-20A12 CR-30A12 CR-40A12 CR-50A12 CR-60A12 CR-80A12 24V CR-20A24 CR-30A24 CR-40A24 CR-50A24 CR-60A24 CR-80A24 48V CR-20A48 CR-30A48 CR-40A48 CR-50A48 CR-60A48 CR-80A48 Technical Specification: Model CotroMax 12V CotroMax 24V CotroMax 48V System voltage 12V DC 24V DC 48V DC Maximum module input short circuit current Model ratings Model ratings Model ratings Maximum load output short circuit current Model ratings Model ratings Model ratings High voltage disconnect set point (HVD) 14.30V 0.1V 28.60V 0.1V 42.90V - - - 0.1V Float charge 13.80V - 0.1V 27.60V - 0.1V 41.40V - 0.1V Low voltage disconnect set point (LVD) 10.50V - 0.1V 21.00V - 0.1V 31.50V - 0.1V Load reconnect set point (LVR) 12.50V 0.1V 25.00V 0.1V 37.50V 0.1V - - - Electronic protection: Short circuit protection at load terminal Overcharging protection using PWM & full off Over discharging protection (LVD) Reverse polarity protection of Solar Modules Reverse polarity protection at battery terminal Reverse current protection at night Power Solar Charge Controller
( LCD Solar charge controller ) Model: CR-10A12 LCD Display indicators: Charging current display Discharging current display Battery voltage display Battery charging status display Percent of remaining charge in the battery System status message display Digital Solar Charge Controller 3 years warranty Solar Charge Controller Model: CR - 10A12 12V, 10 Amp Charging Short/Over load High Medium Low Load off Display indicators: Approved by IDCOL Battery status (High indicator LED): LED ON at Battery high, LED blink at Battery charge full Battery status (Medium indicator LED): LED ON at Battery medium Battery status (Low indicator LED): LED ON at Battery Low, LED blink at near LVD, LED faster blink at very close to LVD Load off indicator LED: LED ON after LVD occurs Charging LED: LED ON when charging, LED blinking when PWM status, LED OFF at charge full status Short circuit / Overload LED: LED blinking if short circuit occurs at load terminals or load greater than 10A Electronic protection: Short circuit protection at load terminal Overcharging protection using PWM & full off Over discharging protection (LVD) Reverse polarity protection of Solar Modules Reverse polarity protection at battery terminal Reverse current protection at night Technical Specification: Solar Charge Controller 3 years warranty Solar Charge Controller Model: CR - 10A12 12V, 10 Amp Charging Short/Over load High Medium Low Load off Approved by IDCOL Model CR-10A12 System voltage 12V DC Maximum module input short circuit current 10A Maximum load output short circuit current 10A High voltage disconnect set point (HVD) 14.30V - 0.10V Float charge 13.90V - 0.10V Low voltage disconnect set point (LVD) 11.60V - 0.10V Load reconnect set point (LVR) 12.60V 0.10V -
7 Watt Approved by IDCOL Photolite SLF-i580 Photolite designed and recently improved the electronic ballast of the 12V DC fluorescent lamp (FL). Preheating, high electronic efficiency and low thermal losses increase the life time of the FL to more than 10000 ON/OFF swithing cycles. The Photolite FL show much higher efficiency (lm/w) compared to LED or incandescent lamps. Specification Nominal voltage 12V DC Nominal current 580 ma Nominal power 7 Watt luminus efficiency 38 lm/w Swithing cycles 10000 Ambient temp 25*C Output frequency 56 KHz Light colour Cool white 3 years warranty for ballast
SLF-i07 SLF-i42 Photolite Model: SLC-i07 12 VDC, 7 Watt Photolite Model: SLC-i42 12 VDC, 5 Watt Approved by IDCOL 7 Watt 5 Watt Precaution: Never use with Regular AC 220V Power source, Use 12V Battery Only Never grasp lamp by glass tube for installation Photolite Model SLC-i07 Type 2U Volt DC 12V Power 7 Watt Photolite Model SLC-i42 Type 2U Volt DC 12V Power 5 Watt Features of DC CFL 5W/7W : Excelent performence for Solar Home System Save Energy and Money Radio Interference Suppressed Electro - Magnetic Interference suppressed Never use with Dimmer, Electronic Timer, Photo Cell Circuit and in totally enclosed recessed luminaries fixture Over Current Protection Reverse Polarity Protection High Brightness Never use where it is exposed to weather Light Weight Environment Friendly Never use for Emergency Exit Light Flicker Free Low Operating Temperature Suitable for Indoor and Outdoor Use (Dry Location Only)
LED-2133 Approved by IDCOL Technical Specification: Model Input Power Light source Working temperature Environmental temperature Life time LED - 2133 12V DC 2W, 3W, 5W High power white LED 0 0 0 C 65 C 0 0-10 C 50 C 35040 hours
( Power Inverter) Specification: System 12V DC 24V DC Optimum efficiency Output wave form Input voltage range Over voltage shutdown Under voltage shutdown Low voltage alarm Overload shutdown Short circuit shutdown Warranty Up to 85% Modified sinewave 10.5-15 VDC Over 15 VDC Under 10.5 VDC 1 year Up to 85% Modified sinewave 21-30 VDC Over 30 VDC Under 21 VDC 1 year Features: 3000 watts continuous power Provides 220V AC power Inverter & AC line dual mode switching option Heavy case with heat sink provides durability LED Display- Main Line/Inverter/Over Load Built-in cooling Fan Internal, replaceable Fuses Power Inverter Strong input & output connection terminals Overload indicator Power ON/OFF Switch
Input: 220V AC Output-1: 12V DC for one battery Output-2: 24V DC for two battery with series connectin SOLAR BATTERY CHARGER BC - 1224 Automatic 12V/24V battery charger Technical Specification: Model Output Capacity Overload/Short circuit protection High voltage Protection with PWM BC - 1224 12V DC / 24V DC 20A max Electronically 14.30V / 28.60V
Photolite Model: MC - 200 (Solar Mobile Charger) Solar Mobile Charger Specification: Model: MC-200 Model Input Output ON/OFF Switch Indicator LED Casing MC - 200 12V DC 220V AC Heavy
Photolite Solar Switch 10A msi Solar Package
SLC-i42 Photolite Charge Controller & Inverter Battery Quality you can trust Contact: Phone: 88-02 - 8101668 Mobile: 88 01716200067, 88 01718745444 Email: msi.bd@gmail.com Web: www.msibd.com Office: House # 06, Road # 04, Sat Mosjid Housing Limited. Mohammodpur, Dhaka - 1207.