Product catalogue Mechanical accessories for pumps and mixers
Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15 Pump accessories Check valve...17 Check valve...18 Gate valve...19 Gate valve...20 Flap check valve...21 Hose unit... 37 Hose unit... 38 Hose unit... 39 Support grips... 40 Support grips... 41 Braid for cable grips... 42 Slurry pump accessories Flange... 44 Coupling... 45 Pipe bend... 46 Lifting chain...22 Lifting chain...23 Lifting chain...24 Chain block and tackle...25 BIBO pump accessories Quick coupling...27 Quick coupling...28 Hose...29 Check valve...30 Hose...31 Hose...32 Hose clamp...33 Hose clamp...34 Hose clamp...35 Jointing pipe...36 The manufacturer reserves the right to alter specifications and design
Mixer accessories Mixer 4610, 4620 Mixer 4610, 4620, 4630, 4640, 4650, 4660, 4670, 4680 Mixer 4410, 4430 3
Single guide bar system Single guide bar system Lifting system Lifting equipment Guide bar system Mixer 4610, 4620, 4630, 4640, 4650, 4660, 4670, 4680 4
Single guide bar system Dimensions All dimensions are in mm. Lifting davit 150 Lifting davit 320 Lifting system Product The lifting system holds the mixer in place and is also used for lifting the mixer when service. It consists of: a lifting davit, a winch, chain links with hook and shackle, a corner block, block and tackle. Maximum load Lifting davit 600 The accessories are CE-marked and approved. Part Maximum load Length Lifting davit 150 80kg/150 kg 1) - Lifting davit 320 320 kg - Lifting davit 600 600 kg - Winch 150 80 kg/150 kg 1) Winch 320 320 kg - Winch 600 600 kg - Lifting chain 500 kg/1000 kg 5m,9m,20m Chain links with hook and shackle 500 kg/1000 kg 5 m, 7 m Corner block 300 kg - Block and tackle 500 kg - Block and tackle 1000 kg - Davit holder 1) Max.load if only one corner block is used: 80 kg Lifting davit Stainless steel Galvanized steel, hot dip 1. Floor mounted 2. Wall mounted 5
Single guide bar system Guide bar system over 6 m Indexing screw 10-90 Alternative upper bracket Guide bars Intermediate support for guide bars over 6 m Lifting davit Dimensions Guide bar system up to 6 m Stainless steel Bracket Indexing screw 10-90 Alternative upper bracket Lower bracket fixed to haunch or sloping tank bottom Lower bracket fixed to tank bottom Lower bracket fixed to tank wall 6
Single guide bar system Brackets Dimensions Measurements for mounting of brackets. All dimensions are in mm. Guide bar Distance between hole and edge dimensions Minimum Recommended 50 x 50 55 mm 110 mm 100 x 50 55 mm 110 mm 100 x 100 65 mm 125 mm 150 x 100 65 mm 125 mm Brackets Guide bar profile Dimensions in mm Davit holder, floor mounted bracket A B C D 50 x 50, 100 x 50 Ø14 15 150 180 100 x 100, 150 x 100 Ø18 20 300 340 Davit holder, wall mounted bracket A B C D E F G H 50 x 50, 100 x 50 Ø14 20 300 70 60 155 210 27,5 100 x 100, 150 x 100 Ø18 50 600 100 110 190 260 35 Guide bar, roof mounted bracket A B C D E F G 50 x 50, 100 x 50 Ø15 190 275 150 20 150 15 100 x 100, 150 x 100 Ø19 230 335 190 20 190 20 7
Single guide bar system Brackets Guide bar profile Dimensions in mm Guide bar, intermediate bracket A B C D E F 50 x 50, 100 x 50 Ø14 43 70 155 210 27,5 100 x 100, 150 x 100 Ø18 50 100 190 260 35 Guide bar, lower bracket A B C D E F G 50 x 50, 100 x 50 Ø14 27.5 147.5 190 160 215 27,5 100 x 100, 150 x 100 Ø18 25 185 250 200 290 45 8
Double/tripod guide bar system Double/tripod guide bar system Lifting system Lifting equipment Lifting equipment Double guide bar system Tripod guide bar system Mixer 4410, 4430 9
Double/tripod guide bar system Dimensions All dimensions are in mm. Lifting davit 300 Lifting system Lifting davit 320 Product The lifting system holds the mixer in place and is also used for lifting the mixer when service. It consists of: a lifting davit, a winch, chain links with hook and shackle, a corner block, block and tackle. Maximum load The accessories are CE-marked and approved. Part Max load Length Lifting davit 320 320 kg - Lifting davit 300 300 kg - Winch 320 320 kg - Winch 300 300 kg - Lifting chain 500 kg 5m,9m,20m Chain links with hook and shackle 500 kg 5 m, 7 m Corner block 400 kg - Block and tackle 500 kg - Lifting davit Stainless steel Galvanized steel, hot dip 10
Double/tripod guide bar system Upper bracket Double guide bar Guide bar Ø115 mm. Length 3m alternative 6m Lifting davit Dimensions Stainless steel All dimensions are in mm. Upper bracket Support Lower bracket 11
Double/tripod guide bar system Tripod guide bar The guide bar holds the mixer in place. It is fastened at the bottom of the tank. An alternative upper bracket is available for mounting on the tank wall. Lifting davit Stainless steel Dimensions All dimensions are in mm. Alternative upper bracket 12
Double/tripod guide bar system Brackets Dimensions Measurements for mounting of brackets. All dimensions are in mm. Guide bar Distance between hole and edge dimensions Minimum Recommended 115 mm 55 mm 110 mm 100 x 100 65 mm 125 mm Brackets Guide bar profile Dimensions in mm Davit holder, floor mounted bracket A B C D 100 x 100 Ø18 20 300 340 Tripod guide bar, alternative upper bracket A B C D E F 100 x 100 Ø18 50 100 190 260 35 Double guide bar, upper bracket A B C D E F G Ø 115 0 / 1294 Ø18 180 35 250 150 75 10 / 1308 20 / 1363 Double guide bar, lower bracket A B C D E F G Ø 115 250 185 32,5 18 100 170 Ø18 13
Cantilever system Dimensions Guide bar length All dimensions are in mm. Wall mounted bracket max. 3 m Cantilever system Product The Cantilever system is intended for small mixers. The cantilever bar is clamped or bolted to the tank edge. For optimal mounting flexibility four different brackets can be used: Floor mounted bracket Hanging bracket Wall mounted bracket Adjustable bracket Floor mounted bracket Application The Cantilever system is intended for mixer 4610 and 4620. Alternative 1 High grade stainless steel 2 Galvanized steel, hot dip 14
Bottom fixing plate system Hanging bracket Adjustable bracket Bottom fixing plate system Application The bottom fixing plate system is intended for mixer 4610 and 4620. Alternative 1 High grade stainless steel 2 Galvanized steel, hot dip αv: angle vertical +60, -46 αh: angle horizontal ± 90 β: angle vertical ± 30 15
Pump accessories 16
Check valve D H C A L Check valve Nominal pressure PN 16 for connection 50-150 PN 10 for connection 200-300 Liquid temperature max +80 C Flange Drilled according to ISO 7005-2 Treatment Alternative Treatment 1 Water resistant black primer 2 Epoxy painting 80 µm Flange connection A C D H L Weight Part No. mm mm mm mm mm kg Alternative 1 Alternative 2 50 165 63 100 115 200 9 83 92 04 83 93 08 65 185 80 114 135 240 11 83 92 05 83 93 09 80 200 96 140 160 260 13 83 92 06 83 93 12 100 220 125 170 200 300 20 83 92 07 83 93 15 150 285 180 230 260 400 42 83 92 08 83 93 16 200 340 250 315 335 500 74 83 92 09 83 93 17 250 400 320 396 410 600 138 83 93 02 83 93 18 300 455 370 460 490 700 200 83 93 03 83 93 19 17
Check valve B H C SW L Check valve Nominal pressure PN 16 for connection 50-250 PN 10 for connection 300 Liquid temperature max +80 C Treatment Grey synthetic basic painting Alternative 1 Nodular cast iron 2 Bronze RG5 Nodular cast iron DN Thread B C H L SW Weight Part No. ISO G mm mm mm mm mm kg 32 11/4" 65 40 76 160 50 1,8 83 93 65 40 1 1/2" 80 50 93 195 60 2,8 83 93 66 50 2" 82 63 110 225 70 5 83 93 67 Bronze RG5 DN Thread B C H L SW Weight Part No. ISO G mm mm mm mm mm kg 32 11/4" 55 40 81 160 50 1,75 83 93 04 40 1 1/2" 70 50 105 207 60 2,75 83 93 50 50 2" 85 63 105 230 70 5,00 83 93 06 18
Gate valve Part Body & Bonnet Ductile iron 500-7 to ISO 1083 Stem Stainless steel, DIN X 20 Cr 13 Wedge Ductile iron 500-7 to ISO 1083, core fully encapsulated with EPDM rubber with integral wedge nut of dezincification resistant brass, CZ 132 to BS 2874. n Gate valve Product Cast iron gate valves, soft sluice valve. d Liquid temperature max +70 C Range of temperature +70 C Nominal pressure PN 10 / PN 16 Treatment Electrostatically applied epoxy resin to DIN 30677- Internally and externally. Flange Drilled according to ISO 7005-2 DN PN L H D1 D2 D3 F G n d Weight Part No. mm mm mm mm mm mm mm number mm kg 50 10,16 150 241 165 125 102 14 180 4 18 12,5 83 92 51 65 10,16 170 271 185 145 122 17 225 4 18 16,0 83 92 37 80 10,16 180 297 200 160 138 17 225 8 18 20,0 83 92 38 100 10,16 190 334 220 180 158 19 280 8 18 26,5 83 92 39 125 10,16 200 376 250 210 188 19 320 8 18 35,5 83 92 40 150 10,16 210 448 285 240 212 19 320 8 22 50,5 83 92 41 200 10 230 562 340 295 268 24 360 8 22 71,0 83 92 45 200 16 230 562 340 295 268 24 360 12 22 71,0 83 92 42 250 10 250 664 400 350 320 27 500 12 22 113,0 83 92 46 250 16 250 664 400 355 320 27 500 12 26 113,0 83 92 43 300 10 270 740 455 400 370 27 500 12 22 160,0 83 92 50 300 16 270 740 455 410 370 27 500 12 26 160,0 83 92 44 19
Gate valve G F H D2 DN d D3 D1 Gate valve Product f n a Cast iron gate valves, with metallic seat. L Liquid temperature max +70 C Part House and cover ISO 1085 Stem DIN EN 10088-3 Liquid temperature max +150 C Nominal pressure PN 10 Treatment Sprayed with grey paint Flange Drilled according to ISO 7005-2 DN L H D1 D2 D3 F G a f n d Weight Part No. mm mm mm mm mm mm mm mm mm number mm kg 50 150 250 165 125 102 12 160 20 3 4 18 12 83 92 27 65 170 280 185 145 122 12 160 20 3 4 18 17 83 92 27 80 180 300 200 160 138 12 160 22 3 8 18 19 83 92 30 100 190 350 220 180 158 14 200 24 3 8 18 26 83 92 31 125 200 400 250 210 188 17 250 26 3 8 18 35 83 92 32 150 210 450 285 240 212 17 250 26 3 8 22 45 83 92 33 200 230 520 340 295 268 17 250 26 3 8 22 75 83 92 34 250 250 650 395 350 320 19 315 28 3 12 22 110 83 92 35 300 270 750 445 400 370 19 315 28 4 12 22 174 83 92 36 20
Flap check valve Flap check valve Cast iron Nominal pressure PN 16 for connection 50-250 PN 10 for connection 300 Liquid temperature + 80 C Flange Drilled according to ISO 7005-2 DN Fig L V D1 D2 D3 a f d n Weight Part No. mm mm mm mm mm mm mm mm number kg 50 1 200 120 165 125 102 20 3 18 4 10 83 93 73 65 1 240 130 185 145 122 20 3 18 4 14,5 83 93 74 80 1 260 135 200 160 138 22 3 18 8 18,0 83 93 75 100 1 300 160 220 180 158 24 3 18 8 27,0 83 93 76 150 1 400 205 285 240 212 26 3 22 8 51,0 83 93 82 200 1 500 255 340 295 268 30 3 22 12 82,0 83 93 83 250 1 600 290 405 355 320 32 3 26 12 125,0 83 93 84 300 2 700 340 445 400 370 28 4 22 12 175,0 83 93 85 21
Lifting chain d B d A t L L tot. t Alternative 1 Stainless steel - EN 10 088-3 1.4404 - AISI 316L 2 Steel Grade 4 hot-dip galvanized min. 45 µm Lifting chain Dimensions Alternative Max. load ton Lifting chain (A) (d xtxb i )mm Master link (B) (d xtxb i )mm Segment length L mm 1 0,2 5 x 18,5 x 7,5 6,5 x 70 x 35 995 1 0,5 6 x 18,5 x 9,5 9 x 70 x 35 995 1 1,0 8 x 24 x 10,4 10 x 80 x 50 992 1 1,5 10 x 30 x 15 12 x 80 x 35 980 2 0,2 5 x 18,5 x 7,5 6,5 x 70 x 35 995 2 0,5 6 x 18,5 x 9,5 9 x 70 x 35 995 2 1,0 8 x 24 x 10,4 10 x 80 x 50 992 2 1,5 10 x 30 x 15 12 x 80 x 35 980 Number of segments 2 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 2 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 Total length L tot Part No. mm approx. 2000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 2000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 approx. 3000 approx. 5000 approx. 7000 approx. 10000 83 09 21 83 09 29 82 94 60 83 09 30 83 09 31 83 94 51 82 94 61 83 94 52 83 94 53 83 94 54 82 94 62 83 94 55 83 94 56 82 94 63 82 94 64 82 94 65 82 94 66 83 09 20 83 09 26 82 94 53 83 09 27 83 09 28 82 94 37 82 94 54 82 94 38 82 94 39 82 94 40 82 94 55 82 94 41 82 94 42 82 94 56 82 94 57 82 94 58 82 94 59 22
Lifting chain L t B ds Lifting chain A d a Alternative 1 Stainless steel - EN 10 088-3 1.4404 - AISI 316L 2 Steel Grade 4 hot-dip galvanized min. 45 µm Alternative Lifting chain (A) (d xtxb i )mm Working load Transition link (B) L kg (d xtxb i )mm mm d s mm a(+tol.) mm Fits the following lifting chains Part No. 1 6,0 x 18,5 x 9,5 500 7x35x16 750 M8 16 (+0,5) 83 94 51-52-53 82 94 45 2 6,0 x 18,5 x 9,5 500 7 x 35 x 16 750 M12 20 (+5) 83 94 37-38-39 82 94 46 1 8,0 x 24,0 x 10,4 1000 9x44x20 750 M12 26 83 94 54-55-56 82 94 47 2 8,0 x 24, 0 x 10,4 1000 9 x 44 x 20 750 M16 24 (+7,6) 83 94 40-41-42 82 94 48 23
Lifting chain d B A t t d Lifting chain L Alternative 1 Stainless steel - EN 10 088-3 1.4404 - AISI 316L 2 Steel Grade T electroplated min. 12 µm Alternative Lifting chain (A) Max. load Transition link (B) Length L Part No. (d xtxb i )mm ton (d xtxb i )mm m 1 6,3 x 19,1 x 8,6 0,5 7x35x16 5 82 94 27 2 6,3 x 19,1 x 8,6 0,5 7 x 35 x 16 5 82 94 28 1 6,3 x 19,1 x 8,6 0,5 7x35x16 9 82 94 29 2 6, 3x 19,1 x 8,6 0,5 7 x 35 x 16 9 82 94 30 1 6,3 x 19,1 x 8,6 0,5 7x35x16 20 82 94 35 1 7,9 x 23 x 10 1,0 9 x 44 x 20 5 82 94 31 2 7,9 x 23 x 10 1,0 9x44x20 5 82 94 32 1 7,9 x 23 x 10 1,0 9 x 44 x 20 9 82 94 33 2 7,9 x 23 x 10 1,0 9x44x20 9 82 94 34 1 7,9 x 23 x 10 1,0 9 x 44 x 20 20 82 94 36 24
Chain block and tackle 1 2 Chain block and tackle Alternative Chain material Lifting chain 1 Stainless steel - EN 10 088-3 1.4404 - AISI 316L See page 24 2 Electroplated See page 22 and 23 Alternative Lifting chain Max. working load c g l Part No. (d xt)mm ton mm mm m 2 5,0 x 15,0 250 277 26 2,5 84 63 63 2 6,3 x 19,1 500 315 27 2,5 84 63 60 2 6,3 x 19,1 500 315 27 7,0 84 63 62 1 6,3 x 19,1 500 - - 0,5 84 63 64 2 7,1 x 20,2 1000 345 30 2,5 84 63 61 1 7,1 x 20,2 1000 - - 0,5 84 63 65 2 7,9 x 23,0 1500 345 30 2,5 84 60 59 25
BIBO pump accessories 26
Quick coupling a d a d G Quick coupling Couping part DN-hose-AI standard. Female-male threaded. G Nominal pressure Die-cast aluminium PN10, PN16 DN PN Standard a d Pipe thread Part No. Inner G Outer G mm mm inch inch 45 16 59 38 G1,5 83 18 50 52 16 66 40 G1,5 83 18 40 52 16 DIN 14307 66 44,5 G2 83 18 24 52 16 66 45 G2A 83 18 37 75 16 89 64,5 G3 83 18 46 75 16 89 60 G3A 83 18 47 110 16 133 100 G4 83 19 34 150 1) 16 160 130 G6 83 19 36 150 1) 16 160 130 G6A 83 19 37 165 10 188 150 G6 83 19 35 1) with 3 catches 27
Quick coupling L a d Quick coupling Couping part DN-hose-AI standard. For hose. Nominal pressure Die-cast aluminium PN10, PN16 Size DN PN Standard a L d Part No. mm mm mm C1,5 38 16 66 90 38 83 18 25 C 2 52 16 DIN 14321 66 90 52 83 19 31 B3 75 16 DIN 14322 89 125 75 83 19 30 A 4 110 16 133 170 100 83 18 26 A 4 1/4 110 16 DIN 14323 133 170 110 83 18 31 F6 1) 150 16 160 180 150 83 18 28 165 6,5 150 10 188 275 150 83 18 27 1) With 3 catches 28
Hose 1 2 3 D T 1. PVC 2. 1 plies 3. PVC Hose Delivery hose pliable. Working temperature PVC -25-60 C D T Colour Weight Working pressure (N.B. 20 C) Bursting pressure (N.B. 20 C) Part No. Inches (mm) mm g/m MPa MPa 11/4(32) 1,35 Dark blue 240 0,9 2,7 94 06 37 11/2(38) 1,35 Dark blue 260 0,5 1,5 94 06 38 2 (52) 1,4 Dark blue 280 0,5 1,5 94 06 64 3 (76) 1,8 Dark blue 460 0,4 1,2 94 06 65 4 (102) 2,0 Dark blue 650 0,4 1,2 94 06 66 6 (153) 2,1 Dark blue 1300 0,3 0,9 94 06 67 29
Check valve Ø D B Check valve C A Aluminium DN C A B D Part No. ISO G mm mm mm 50 2 90 185 44,5 83 92 01 80 3 122 220 64,5 83 92 02 100 4 166 260 100 83 92 03 30
Hose 1 2 3 Ø D 1. Rubber 2. 2 plies 3. Rubber Hose T Temperature Inside Outside Reinforcement -40 C - 100 C black with smooth syntetic rubber black, with smooth syntetic rubber, UV-resistant high strength with syntetic cord. Two plies D inches (mm) T mm Colour Weight Kg/mm Working pressure MPa Bursting pressure MPa Part No. 2 (51) 2,75 Black 0,53 0.5 1.5 94 06 12 3 (76) 2,75 Black 0,78 0.5 1.5 94 06 13 4 (102) 3 Black 1,16 0.5 1.5 94 06 14 6 (152) 3 Black 1,75 0.5 1.5 94 06 15 8 (203) 3,5 Black 2,50 0.5 1.5 94 06 10 10 (254) 4 Black 3,57 0.5 1.5 94 06 11 11/2(40) 3 Black 0,48 1.0 3.0 94 06 56 2 (51) 3 Black 0,60 1.0 3.0 94 06 57 3 (76) 3 Black 0,88 1.0 3.0 94 06 58 4 (102) 3,5 Black 1,38 1.0 3.0 94 06 59 6 (152) 4 Black 2,20 1.0 3.0 94 06 60 31
Hose 1 2 Ø D 1. Rubber 2. 2plies 3. Rubber Hose Delivery hose pliable. T Temperature Inside Outside Reinforcement -40 C - 100 C black with smooth syntetic rubber black, with smooth syntetic rubber, UV-resistant high strength with syntetic cord. Two plies D T Working pressure Bursting pressure Part No. Inches (mm) mm MPa MPa 2 (52) 1,2-1,4 1,5 4,2 92 58 45 3 (76) 1,2-1,4 1,5 4,2 92 58 46 4 (102) 1,2-1,4 1,0 3,5 92 58 47 6 (152) 1,2-1,4 1,0 3,5 92 58 48 32
Hose clamp e r ø d b Hose clamp a Steel Werkstoff Nr 1.0333 Screw and nut Grade 8.8 coated with zink d a b e r Recommended tightening torque Part No. mm mm mm mm mm Nm 43-47 20 +0,4 22 10 M7 16 84 63 71 55-59 25 +0,4 22 10 M 7 16 84 63 72 79-85 25 +0,4 27,5 13 M8 25 84 63 73 85-91 25 +0,4 27,5 13 M 8 25 84 55 58 104-112 25 +0,4 27,5 13 M8 25 84 63 74 112-121 25 +0,4 27,5 13 M 8 25 84 55 59 130-140 26 +0,5 29 17 M10 50 84 63 75 150-162 26 +0,5 29 17 M 10 50 84 55 60 33
Hose clamp N Ø D t B Hose clamp Steel, bright coated with zinc (acc. to DIN 3017) D B N t Part No. mm mm mm mm 40-60 12,0 7,0 0,8 84 55 53 50-70 12,0 7,0 0,8 84 55 54 60-80 12,0 7,0 0,8 84 55 55 90-110 12,0 7,0 0,8 84 55 56 140-160 12,0 7,0 0,8 84 55 57 34
Hose clamp ØD Hose clamp b Steel, yellow chromatised (bright coated with zinc) D b Part No. mm mm 208-224 25 84 55 61 220-236 25 84 55 62 258-274 25 84 55 63 35
Jointing pipe A C E Jointing pipe L 2 L 1 Steel sheet, hot dip galv. A C E L 1 L 2 Part No. mm (inch) mm mm mm mm 50 (2") 47,6 1,2 260 55 84 28 12 75 (3") 72 1,5 260 75 84 28 14 102 (4") 99 1,5 280 75 84 28 15 150 (6") 147 1,5 400 95 84 28 16 200 (8") 197 1,5 400 95 84 28 17 250 (10") 247 1,5 400 95 84 28 18 36
Hose unit A B C Hose unit PVC pressure hose pliable, both sides connected with two hose couplings and two or three hoseclamps. Lenght 20 m Steel sheet, hot dip galv. Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A1 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1,5 83 19 31 84 55 53 4 94 06 64 82 93 90 3 (76) 0,4 1,2 83 19 30 84 55 55 4 94 06 65 82 93 91 4 (102) 0,4 1,2 83 18 26 84 55 56 4 94 06 66 82 93 92 6 (153) 0,3 0,9 83 18 28 84 55 57 6 94 06 67 82 93 93 Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A2 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1,5 83 18 32 84 55 53 4 94 06 64 82 93 94 3 (76) 0,4 1,2 83 18 34 84 55 55 4 94 06 65 82 93 95 4 (102) 0,4 1,2 83 19 26 84 55 56 4 94 06 66 82 93 96 6 (153) 0,3 0,9 83 19 27 84 55 57 6 94 06 67 82 93 97 37
Hose unit A B C Hose unit PVC pressure hose pliable, both sides connected with two hose couplings and two or three hose clamps. Length 20 m Steel sheet, hot dip galvanized Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A1 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 1,5 4,2 83 19 31 84 55 53 4 92 58 45 82 94 00 3 (76) 1,5 4,2 83 19 30 84 55 55 4 92 58 46 82 94 01 4 (102) 1,0 3,5 83 18 26 84 55 56 4 92 58 47 82 94 02 6 (153) 1,0 3,5 83 18 28 84 55 57 6 92 58 48 82 94 03 Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A2 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 1,5 4,2 83 18 32 84 55 53 4 92 58 45 82 94 04 3 (76) 1,5 4,2 83 18 34 84 55 55 4 92 58 46 82 94 05 4 (102) 1,0 3,5 83 19 26 84 55 56 4 92 58 47 82 94 06 6 (153) 1,0 3,5 83 19 27 84 55 57 6 92 58 48 82 94 07 38
Hose unit A B C Hose unit Synthetic rubber pressure hose with synthetic cord pliable, both sides connected with two hose couplings and two hose clamps. Length 20 m Steel sheet, hot dip galvanized Inside diameter hose Working press. (at 20 C Bursting pressure Part No. hose coupling (A) Part No. hose clamps (B) Number of hose clamps (B) Part No. hose (C) Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1,5 83 19 31 84 55 53 4 94 06 12 83 96 92 3 (76) 83 19 30 84 55 55 4 94 06 13 83 96 93 4 (102) 83 18 26 84 55 56 4 94 06 14 83 96 94 6 (152) 83 18 28 84 55 51 4 94 06 15 83 96 95 39
Support grips L A B Dy Support grips Support grip Thimble Press lock Stainless steel Stainless steel Copper Steel sheet, hot dip galvanized For cable D y B L Number of meshes (A) Part No. mm mm mm st/pcs 11-18 8 250 18 83 57 23 19-24 9 300 18 83 57 24 25-36 11 300 18 83 57 25 37-49 15 500 25 83 57 26 50-59 16 500 25 83 57 27 60-74 17 600 25 83 57 28 40
Support grips Support grips Support grip Thimble Press lock Stainless steel Stainless steel Copper Steel sheet, hot dip galvanized Dimensions Type A Type B Type C 1 eye/split (lace up) 1 eye/closed 2 eyes/closed Type L L 1 For cable d y Part No. mm mm A 635 250 Steel. hot dip galvanized B 120 165 171 710 760 865 100 180 178 250 250 250 Steel. hot dip galvanized mm 19-25 83 57 39 9-11 15-17 16-19 25-32 32-38 38-51 83 57 38 83 57 30 83 57 22 83 57 40 83 57 33 83 57 34 B 635 16 Stainless steel 25 83 57 35 C 915 17 Steel. hot dip 25 83 57 37 galvanized 41
Braid for cable grips Ø D Braid for cable grips Colour: Design Polyethene Orange Friable pleated ropes D Part No. mm 18 94 11 23 20 94 11 24 21 94 11 22 42
Slurry pump accessories 43
Flange Z B A X W Y Flange ASTM A-536 Pipe Max. work Sealing surface W X Y Z Part No. Nom. size Actual size pressure Amax. Bmin. mm mm kpa mm mm mm mm mm mm 100 114,3 2065 114 141 252 229 191 24 82 83 80 150 168,3 2065 168 198 305 279 241 25 82 83 82 44
Coupling Y Z X Coupling ASTM A-536 Nominal pressure PN10, PN16 VITAULIC Pipe Max. work X Y Z Part No. type nominal size actual size pressure mm mm kpa mm mm mm Style 75 100 114,3 3450 148 192 51 84 57 29 Style 77 150 168,3 6900 229 294 54 84 57 33 45
Pipe bend A Pipe bend Cast iron, coated inside with neoprene rubber Pipe A Part No. Nominal size Actual size mm mm mm MPa 100 114,3 127 84 55 80 150 168,3 165 84 55 81 46
www.flygt.com Mechanical accessories..04.01.eng.03.03. ITT Flygt AB XX XX XX