LED Vision Rotating Beacon Die-cast metal base Dual voltage 12V 24V NO GEARSG NO BRUSHES Patented Hybrid Drive technology. No gears, no belts, no brushes Sealed IP67 Vision Alert introduces a true rotating LED safety beacon, the LED Vision Rotating Beacon. These new LED beacons utilise a rugged direct drive system eliminating problems typically associated with gear driven beacons. This unique design offers the exceptional light output of a rotating safety beacon combined with the low current draw and extended life of LEDs. Sealed IP67 for long life even under extreme conditions, the LED Vision Rotating Beacons are all backed by a 5 year warranty. 5 YR WARRANTY NEW in EL2009 50 000 LEDs rated 50,000 hours of HOURS Low current draw UV hard coated polycarbonate lens for high durability in harsh conditions Available in 5 output colours SAE Class 1 rated output. Brightest light output for a beacon LED Vision Rotating Specifications Voltage : 12-24V Current Draw : 1.3A @ 12V 0.8A @ 24V Flash Rate : 120FPM Lens : Polycarbonate Base : Die cast Aluminium Approvals: SAE J845 Class 1 CE, e IP Rating : IP67 Operating Temperature : -30 c + 50 c Light Source: 8 x 3W LED 4
LED Beacons LED Vision - Rotating Beacon 3 Bolt Amber Blue Green Red White 12-24V 107000 107200 107300 107400 107900 Blue model is shipped with a clear lens. LED Vision - Rotating Beacon Magnetic Amber Blue Green Red White 12-24V 108000 108200 108300 108400 108900 161mm 180mm 157mm Magnetic 100 2600mm lead cigar plug with integrated switch. Blue model is shipped with a clear lens. 205mm rotating LED Technology Patented Hybrid Drive technology no gears, no belts, no brushes wear out. Vision Alert Rotating LED products avoid problems typically found in gear or belt driven beacons by using a direct-drive stepper mor. A direct-drive stepper mor has much greater reliability than a brushed DC mor with either a gear or belt assembly, because the only moving parts are the shaft and ror which are supported by two sealed bearings. The stepper mor uses magnetic induction rotate the ror and shaft so there are no gears slip or belts break and no electrical brushes or other contacts wear out. Rotating Light Output. The light emitted from the 8 LEDs is collimated in a beam that shines straight up from the base. A double sided mirror is mounted the shaft of the direct-drive stepper mor at 45º intercept the beam and is rotated in a 360º circle sweep the beam much like a standard halogen rotar. Located on page 23 Extended life of LEDs over alternative lighting. By default LEDs provide a longer working life and greater resistance vibration over alternative forms of lighting. Additionally LEDs do not require the use of a costly and life limiting flash capacir as required in flashing xenon beacons. Lower current draw from LEDs. LEDs require less current draw provide an equal or greater light output compared alternative lighting technologies. Rotating LED Beacon 1.3A @ 12V Heavy Duty Xenon Beacon 2.3A @ 12V Rotating Halogen Beacon 4.6A @ 12V 5
Midi Vision The MIDI Vision rotating beacon incorporates a considerable technological advancement in light output by using Free-Form optics. This has the effect of increasing the light output of conventional amber beacons by 20% or more over our original designs. Free-Form reflecr provides 20% more light output Rotating beacons are dual voltage 12V 24V LOW PROFILE Aerodynamic low profile Whisper quiet rotars, running on stainless/acetyl bearings 5 Different mounting configurations Twist lock polycarbonate lens provides easy field maintenance Mag70 156mm 400 Series - Mag 70 400000 400100 400200 400300 400400 12V 400001 400101 400201 400301 400401 24V 400002 400102 400202 400302 400402 200mm Cord extends 2600mm length, plug fits standard cigar/din socket 148mm 20mm 401 Series - 1 Bolt 401000 401100 401200 401300 401400 12V 401001 401101 401201 401301 401401 24V 401002 401102 401202 401302 401402 1 x M12 Bolt, requires 12.7mm hole. 300mm free length of cable 202mm 145mm 402 Series - Pole Mount 402000 402100 402200 402300 402400 12V 402001 402101 402201 402301 402401 24V 402002 402102 402202 402302 402402 Single pole plug DIN 72591 6
Beacons Rotating 403 Series - 3 Bolt 403000 403100 403200 403300 403400 12V 403001 403101 403201 403301 403401 24V 403002 403102 403202 403302 403402 3 x M6 Bolts, requires 3 holes of 7mm Dia. 300mm free length of cable 15mm 145mm 404 Series - Flexi 404000 404100 404200 404300 404400 12V 404001 404101 404201 404301 404401 24V 404002 404102 404202 404302 404402 214mm 155mm Flexible single pole plug DIN 72591 133mm 407 Series - Mag 50 407000 407100 407200 407300 407400 12V 407001 407101 407201 407301 407401 24V 407002 407102 407202 407302 407402 150mm Mag50 80 Cord extends 2600mm length, plug fits standard cigar/din socket 166mm 403 Series - 240volt 240v 403000-240V 403100-240V 403200-240V 403300-240V 403400-240V Must be installed by a qualified 240 volt electrician 75mm 25mm 15mm 145mm Midi Vision Spare Parts Midi Lens Amber 910320 Din. Blue 910321 Cal. Blue 910322 Green 910325 Red 910324 Midi Vision Spares Rotar Module 999554 Reflecr only 910336 Beacon Base 910030 Drive Belt - Flat 945034 - Clip 920004-12V 64150-24V 64155 7
500 Series As with our Evolution, MIDI and Blaze/Blaze2 ranges, the 500 Series rotating beacon range now incorporates Free-Form optics which gives considerable technological advancement in light output. This has the effect of significantly increasing the light output of our amber beacons over our original designs. Free-Form reflecr provides 20% more light output Rotating beacons are dual voltage 12V 24V Acrylic lens provides high durability against harsh conditions Whisper quiet rotars, running on stainless/acetyl bearings 5 Different mounting configurations Twist lock acrylic lens provides easy field maintenance Mag70 190mm 500 Series - Mag 70 500000 500100 500600 500400 500500 12V 500001 500101 500601 500401 500501 24V 500002 500102 500602 500402 500502 200mm Cord extends 2600mm length, plug fits standard cigar/din socket 183mm 20mm 501 Series - 1 Bolt 501000 501100 501600 501400 501500 12V 501001 501101 501601 501401 501501 24V 501002 501102 501602 501402 501502 1 x M12 Bolt, requires 12.7mm hole. 300mm free length of cable 238mm 502 Series - Pole Mount 502000 502100 502600 502400 502500 12V 502001 502101 502601 502401 502501 24V 502002 502102 502602 502402 502502 Single pole plug DIN 72591 8
Beacons Rotating 503 Series - 3 Bolt 503000 503100 503600 503400 503500 12V 503001 503101 503601 503401 503501 24V 503002 503102 503602 503402 503502 3 x M6 Bolts, requires 3 holes of 7mm Dia. 300mm free length of cable 15mm 178mm 507 Series - Mag 50 507000 507100 507600 507400 507500 12V 507001 507101 507601 507401 507501 24V 507002 507102 507602 507402 507502 185mm Mag50 80 Cord extends 2600mm length, plug fits standard cigar/din socket 166mm 500 Series Beacon Spare Parts 500 Series Lens Amber 910023 Din. Blue 910024 Cal. Blue 910028 Green 910155 Red 910153 Magenta 910150 500 Series Spares Rotar Module 999555 Reflecr only 910352 Beacon Base 910030 Drive Belt - Flat 945034 - Clip 920004-12V 64150-24V 64155 9
LED Vision Heavy Duty Vision Alert s range of new LED Vision beacons offer the latest in LED technology combined with a rugged industrial design. Offering low power consumption, long life and outstanding light output. LED Vision beacons are available suit all heavy duty applications. Selecr switch for quad or double flash & intensity Dual voltage 12V 24V 5 YR WARRANTY Hi/Lo intensity control State of the art LED technology Polycarbonate lens provides high durability against harsh conditions Reverse polarity protection Epoxy filled base for enhanced moisture and vibration protection Low current draw SAE Class 1 rated output. Brightest light output for a beacon LED Vision H/Duty Specifications Voltage : 12-24V Current Draw : 0.5A @ 12V 0.25A @ 24V Flash Rate : Double @ 80FPM Quad @ 65FPM Lens : Polycarbonate Base : Die cast Aluminium Approvals: SAE J845 Class 1 (Amber & Red) SAE J845 Class 2 (Blue & White) CE, e IP Rating : IP67 Operating Temperature : -30 c + 50 c Light Source: 8 x 3W LED 10