MERITOR MEDIUM DUTY FRONT-DRIVE STEER AXLES MX-120, MX-120 HR AND MX-120-EVO SERIES PB-02167
Meritor.com/lod With a user-friendly approach and visually appealing format for easier, quicker surfing, Literature on Demand is your go to spot for all your literature needs Parts Books, Sales Brochures and Technical Publications. 2014 Meritor, Inc.
2 MX-120 & MX-120HR FIGURE 1
Item Description Qty. Part Number Comments 1 Wheel Nut 20 1227-Z-1378 M22X1.5 2 Brake Drum 2 3219-N-5942 3 Capscrews Cover Plate 16 S-268P-2 3/8-8-1 4 Washers Cover Plate 16 1229-K-1597P 5 Cover Plate 2 3266-Z-1456 6 Snap Ring Axle Shaft 2 1229-W-4807 7 Capscrews Drive Flange 16 10-X-1594 5/8-11-1.75 8 Washers Drive Flange 16 1229-U-1503 9 Drive Flange 2 3270-R-1084 10 Outer Adjusting Nut 2 1227-K-1025 3.750-12 11 Lock Washer 2 R002560 12 Inner Adjusting Nut 2 1227-D-1018 3.750-12 13 Outer Bearing Cone 2 594A 14 Outer Bearing Cup 2 592A 15 Hub Assembly 2 A-333-R-4230 Available as Assembly Only. Contains Items 14, 17. 16 Wheel Studs 17 Inner Bearing Cup 2 2618 18 Inner Bearing Cone 2 52400 19 ABS Tone Ring 2 3237-V-1062 20 20-X-2392 Steel Wheels 20 Grease Seal 2 A-1205-P-2434 20 20-X-2390 Aluminum Wheels 21 Capscrews Brake Assembly 22 S-21020A-2 5/8-11-2.5 22 Washers Brake Assembly 22 1229-W-1557 1 (LH) QP6-1655-451 MX-10/12-120 axles with MA212 lining material. See Figure 2 for 1 (RH) QP6-1655-452 individual components. 1 (LH) QP6-1655-449 MX-14-120 axles with R301 lining material. See Figure 2 for individual 1 (RH) QP6-1655-450 components. 23 Brake Assembly 1 (LH) QP6-1655-729 MX-10/12/14-120 axles with SOR610 lining material. See Figure 2 for 1 (RH) QP6-1655-730 individual components. 1 (LH) QP6-1656-781 MX-16-120 axles with R403 lining material. See Figure 2 for individual 1 (RH) QP6-1656-782 components. 1 (LH) QP6-1656-1113 MX-16-120 axles with R301 lining material. See Figure 2 for individual 1 (RH) QP6-1656-1114 components. 24 Camshaft Seal 4 A-1205-V-1556 25 Camshaft Bushing 2 1225-R-1344 26 Spacing Washer (Outer) 6 1229-B-1848 27 Automatic Slack Adjuster 2 See Figure 3 28 Spacing Washer (Inner) 2 1229-S-2697 29 Camshaft Snap Ring 2 1229-X-1116 30 Wear Sleeve 2 1199-T-3166 31 Spindle Assembly 2 A-3213-M-1937 Available as Assembly only. Contains Items 30, 32, 54. 32 ABS Bushing 2 S1225-S-1189 2 R955459 For use with Bendix WS-24 style ABS equipped axles only. 33 ABS Clip For use with WABCO ABS equipped axles or Bendix WS-20 style ABS 2 2237-Q-1005 equipped axles. 3
4 MX-120 & MX-120HR FIGURE 1
Item Description Qty. Part Number Comments Bendix WS-24 style ABS euipped axles only. Replaces Bendix 2 A-3237-Z-1248 34 ABS Sensor Assembly WS-20 style ABS sensor A-3237-Z-1196. 2 A-2237-B-1328 WABCO ABS equipped axles only 1 (LH) A-3111-Z-3874 Wheelbase < 190 in. Contains Items 24, 25. A-3111-Z-3874 replaces A-3111-R-3684. A-3111-A-3875 replaces A-3111-T-3686. If replacing the old style knuckle, both the LH and RH sides must be replaced. 35 Steering Knuckle Assembly 1 (RH) A-3111-A-3875 Wheelbase >= 190 in. Contains Items 24, 25. A-3111-B-3876 replaces 1 (LH) A-3111-B-3876 A-3111-V-3688. A-3111-C-3877 replaces A-3111-W-3689. If replacing the old style knuckle, both the LH and RH sides must be replaced. 1 (RH) A-3111-C-3877 35a Shim - 0.005 2803-L-3444 As Shim - 0.015 2803-M-3445 reqd. Shim - 0.025 2803-N-3446 Knuckle end-play. Available in KIT 4760. 35b ABS Cable Grommet 2 2237-A-1223 36 Capscrews Lower Knuckle Cap 8 S-21214A-2 3/4-10-1.75 37 Washers Lower Knuckle Cap 8 1229-V-1556 38 Grease Fitting 6 1199-B-3226 39 Lower Knuckle Cap 2 3262-G-1255 40 Thrust Bearing 2 A-1228-X-1220 41 Capscrews Upper Knuckle Cap/ Steering Arm 10 S-21424A-2 7/8-9-3 42 Washers Upper Knuckle Cap/ Steering Arm 10 1229-M-1625 1 (LH) 3299-X-7148 43 Chamber Bracket 1 (RH) 3299-Y-7149 1 (RH) 3299-Q-7349 For use with offset clevis only 44 Steering Arm 1 See Page 13 45 Grease Seal Upper Cap/Steering Arm 2 1205-A-1743 46 Nut Air Brake Chamber 4 NL-210-1 MX10 x 1.5 47 Washers Air Brake Chamber 4 1229-U-1503 48 Air Brake Chamber 2 A67-3276-T-20 MX - 10/12/14-120 axles 2 A88-3276-X-24 MX - 16-120 axles 49 Steering Stop Adjusting Screw 2 26-X-227 9/16-12 - 1.75 50 Steering Stop Adjusting Nut 2 N-39-1 9/16-12 51 Tie Rod End 1 (LH) R230068 1 (RH) R230069 1 A-3102-Y-3457 For Std. Track (1752mm KPI) Standard Duty (38.1mm OD) 52 Cross Tube w/ clamps 1 A-3102-Z-3458 For Wide Track (1790mm KPI) Standard Duty (38.1mm OD) 1 A-3102-N-3472 For Std. Track (1752mm KPI) Heavy Duty (44.5mm OD) 1 A-3102-G-3465 For Wide Track (1790mm KPI) Heavy Duty (44.5mm OD) 1 A2-3102-Y-3457 For Std. Track (1752mm KPI) Standard Duty (38.1mm OD) 53 Tie Rod Assembly 1 A2-3102-Z-3458 For Wide Track (1790mm KPI) Standard Duty (38.1mm OD) 1 A2-3102-N-3472 For Std. Track (1752mm KPI) Heavy Duty (44.5mm OD) 1 A2-3102-G-3465 For Wide Track (1790mm KPI) Heavy Duty (44.5mm OD) 54 Outer Axle Shaft Bushing 1 1225-L-1442 Replaces 1225-G-1333 5
6 MX-120 & MX-120HR FIGURE 1
Item Description Qty. Part Number Comments 55 Grease Seal Axle Shaft 2 A-1205-V-2648 56 Axle Shaft Assembly LH 1 A-3205-W-1115 For KPI 69 (1752m m) A-3205-J-1128 For KPI 70.5 (1790mm) 57 Oil Seal Axle Shaft 2 A-1205-U-2647 SEAL MUST BE INSTALLED WITH NOTCH ON TOP 58 Inner Axle Shaft Bushing 1 1225-L-1442 Replaces 1225-G-1333 59 Axle Housing Assembly 1 See Bill of Materials Contains Items 58, 60, 61. Three piece housing (before 11/03) also contains items 65, 66, 67 and 68. 60 King Pin Bushing 4 1225-U-1191 61 Socket Plug 4 1250-V-1218 62 Lube Fill Plug 1 1250-E-473 3/4-14 63 Breather Assembly 1 A-1199-W-4053 64 Lube Drain Plug 1 1250-E-473 3/4-14 65 Dowel Spring Plate 1 1246-Z-390 Not required with one-piece housing (after 11/03). 1/2-13-1.5 66 Spring Plate 1 3305-S-1449 67 Washer Spring Plate 1 1229-C-1511 68 Capscrew Spring Plate 1 S-2812A-2 69 Carrier Assembly 1 See Bill of Materials 70 Washer Carrier Housing 12 1229-C-1511 71 Capscrew (Short) Carrier Housing 8 10-X-1602 1/2-13-1.5 72 Capscrew (Long) Carrier Housing 4 10-X-1603 1/2-13-2.75 73 Yoke 1 See Bill of Materials 74 Washer Yoke 1 1229-A-2653 75 Nut Yoke 1 40-X-1236 M32X1.5 76 Axle Shaft Assembly RH 1 A-3205-X-1116 77 Upper Knuckle Cap 1 3266-A-1457 KIT 4760 SHIM KIT 1 Shim -.005 4 2803-L-3444 2 Shim -.015 4 2803-M-3445 3 Shim -.025 4 2803-N-3446 4 Instruction Sheet 1 TP-0690 Knuckle end-play 7
MX-120 & MX-120HR FIGURE 2 8 Item Description Qty. Part Number Comments 78 Camshaft 1 (LH) 2210-E-8585 1 (RH) 2210-D-8584 79 Washer 1 2210-D-8584 80 Camshaft Seal 2 1229-X-3118 81 Camshaft Bushing 1 1225-B-834 82 Snap Ring 1 1229-T-4102 83 Brake Shoe Anchor Pin 2 1259-N-274 84 Anchor Pin Bushing 2 1225-B-496 85 Brake Shoe Retaining Spring 2 2258-H-1230 2 A22-3222-Z-2288 MX-10/12-120 axles with MA212 lining material. Contains items 89 & 90. 2 A4-3222-Z-2288 MX-14-120 axles with R301 lining material. Contains items 89 & 90. 86 Brake Shoe and Lining Assembly 2 A29-3222-Z-2288 MX-10/12/14-120 axles with SOR610 lining material. Contains items 89 & 90. 2 A8-3222-P-2200 MX-16-120 axles with R403 lining material. Contains items 89 & 90. 2 SR301-4715QP MX-16-120 axles with R301 lining material. Contains items 89 & 90. 87 Brake Spider Assembly 1 A-3211-M-5733 88 Brake Shoe Return Spring 1 2258-Y-1273 89 Brake Shoe Roller 2 2297-T-7222 90 Brake Shoe Roller Retainer 2 3105-B-210 91 Dust Shield Capscrew 5 S-264B 3/8-16-.5 92 Dust Shield 1 (LH) 3264-P-1290 1 (RH) 3264-Q-1291 93 Dust Shield 1 (LH) 3264-T-1450 1 (RH) 264-S-1449
MX-120 & MX-120HR FIGURE 3 Item Description Qty. Part Number Comments 27 Slack Adjuster Assembly 2* A2-3275-A-1249S Contains items 94, 95, 97, 98, 99 and 100. 94 Slack Adjuster 1 A1-3275-A-1249 95 Clevis 1 1245-Z-1066 Standard clevis. For use on ALL LH and on RH in combination with 3299-Y-7149. 95A Clevis Offset 1 1245-H-1074 Offset clevis. For use on RH in combination with 3299-Q- 7349 ONLY. 96 Clevis Pin Large 1 19-X-1116 97 Clevis Pin Small 1 19-X-127 98 Clip Large 1 2257-D-1174 99 Clip Small 1 2257-C-1173 *NOTE: All LH slack adjusters can be ordered as assembly A2-3275-A-1249S. The RH slack adjusters can also be ordered as assembly A2-3275-A-1249S if they have standard clevises. RH slack adjusters with OFFSET clevises must be ordered as separate components (Items 94, 96, 97, 98, 99 and 100). 9
10 MX-120-EVO FIGURE 4
Item Description Qty. Part Number Comments 1 Wheel Stud Nuts 20 1227-Z-1378 M22X1.5 2 Brake Drum 2 85123370098 3 Capscrews 16 S-268-P-2 3/8-16-1 4 Washers 16 1229-K-1597 5 Hubcap 2 3266-Z-1456 6 Snap Ring 2 1229-W-4807 7 Capscrews 16 10-X-1594 5/8-11-1.75 8 Washers 16 1229-U-1503 9 Drive Flange 2 3270-W-1115 10 O-Ring 2 5-X-1429 11 Outer Adjusting Nut 2 1227-H-346 3.0-12 12 Lock Washer 2 1229-R-1058 13 Inner Adjusting Nut 2 1227-V-516 3.0-12 14 Outer Bearing Cone 2 1228-U-1815 15 Outer Bearing Cup 2 1228-T-1814 16 Hub 2 16193-000000 17 Wheel Studs 20 9001989 18 Inner Bearing Cup 2 1228-N-1808 19 Inner Bearing Cone 2 1228-K-1805 20 Grease Seal, Hub 2 A-1205-N-1392 21 Tooth Wheel 2 3237-V-1062 22 Brake Assembly 2 See Figure 5 23 Outer Camshaft Seal 2 A-1205-X-2650 24 Inner Camshaft Bushings 2 1225H1568 24A Outer Camshaft Bushing 2 1225-J-1362 25 Inner Camshaft Seal 2 A-1205-V-1556 26 Outer Washer Flat 2 1229-S-2697 27 Automatic Slack Adjuster 2 A-1 3275A-1249 28 Snap Ring 2 1229-D-2942 29 Inner Spacing Washer 2 1229-N-4590 30 Capscrews 20 S-21014-A-2 5/8-11-1.5 31 Washers 20 WA-310 32 Oil Seal Spindle 2 A-1205-V-2648 33 Spindle 2 A-3213-T-2256 34 Outer Axle Shaft Bushing 2 1225-G-1593 35 ABS Sensor, Clip and Bushing 2 A-3237-Z-1248 36 Grease Fitting 45 Degree 4 1199-N-1860 36A Grease Fitting Straight 2 1199-H-1620 1 (LH) A-3111-B-4630 Wheelbase less than 190 inches 37 Steering Knuckle Assembly 1 (RH) A-3111-C-4631 Includes items 23, 24, 24A and 25 1 (LH) A-3111-Z-4628 Wheelbase greater than 190 inches 1 (RH) A-3111-A-4629 Includes items 23, 24, 24A and 25 2803-E-4113 0.127 Used to set Knuckle endplay 38 Shim As reqd. 2803-F-4114 0.381 2803-D-4112 0.635 11
12 MX-120-EVO FIGURE 4
Item Description Qty. Part Number Comments 39 Grease Seal, Upper Cap/ Steering Arm 2 1205A-1587 40 Steering Arm 1 3133-P-9402 See page 14 41 Chamber Bracket LH 1 3299-S-7481 42 Washer 5 1229-T-1554 43 Capscrews 5 S-21422-A-2 7/8-9-2.75 44 Air Brake Chamber 2 A-673276-T-20 45 Steering Stop Adjusting Screw 2 26-X-227 9/16-12-1.75 46 Steering Stop Adjusting Nut 2 N-39-1 9/16-12 47 Thrust Bearing 2 A-1228-P-2457 48 Oil Fill/Drain Plug, Hub 2 45-X-1093 M22X1.5 49 Lower Knuckle Cap 2 3223-J-1024 50 Lower Knuckle Cap Washers 8 1229-V-1556 51 Capscrews 8 S-21214 3/4-10-1.75 52 Tie Rod Assembly 1 A-23102-Y-3457 53 Tie Rod End LH 1 A-3144-E-525 53A Tie Rod End RH 1 A-3144-E-524 54 Cross Tube 1 A-23102-Y-3457 55 Axle Shaft Assembly LH 1 A-3302-D-1044 For KPI 69 1 A-3302-F-1046 For KPI 70.5 56 Oil Seal, Housing 2 A-1205-U-2647 Seal must be installed with notch on top 57 Inner Axle Shaft Bushing 2 1225-L-1442 58 Socket Plug 4 1250-L-220 59 Bushing 4 1225-B-1562 60 Breather Assembly 1 A-1199-W-4053 61 Lube Plug Fill 1 P112 3/4-14 62 Axle Housing 1 See bill of materials. Containing items 57, 58 and 59 63 Lube Plug Drain 1 1250-E-473 64 Carrier Assembly 1 See Bill of Materials 65 Carrier Housing Washers 12 1229-G-1511 66 Short Capscrew 8 10-X-1602 1/2-13-1.5 67 Long Capscrew 4 10-X-1603 1/2-13-2.75 68 Yoke 1 See bill of materials 69 Yoke Washer 1 1229-A-2653 70 Yoke Nut 1 40-X-1236 M32X1.5 71 Chamber Bracket RH 1 3299-T-7482 72 ABS Cable Grommet 2 2237-A-1223 73 Brake Chamber Nuts 4 N-310-1 M10X1.5 Brake Chamber Washers 4 1229-U-1503 74 Universal Joint and Axle Shaft Assembly, Short 1 A3302-E-1045 75 Cap Steering Knuckle 1 3223-L-1026 13
MX-120-EVO FIGURE 5 Item Description Qty. Part Number Comments 1 Spring Shoe Return 1 2258-Y-1273 2 Brake Shoe and Lining Assembly 2 See Bill of Materials 3 Camshaft, Fin. LH 1 2210-U-8315 3 Camshaft, Fin. RH 1 2210-V-8316 4 Seal Camshaft Bracket Tube Cam End 1 1205-Z-2652 5 Screw-Cap 4 S-264B 3/8-16x0.5 6 Dust Shield 1 3264-N-118 LH and RH 7 Fitting-Grease 1 1199-N-1860 8 Knuckle Steering Assembly LH 1 A-3111-Z-4628 8 Knuckle Steering Assembly RH 1 A-3111-A-4629 9 Washer-Flat 1 1229-S-2697 10 Washer-Flat 1 1229-N-4590 11 Snap Ring 1 1229-D-2942 12 Steering Stop Adjusting Screw 1 26-X-227 13 Steering Stop Adjusting Nut 1 N-39-1 9/16-12 14 Pin-Brake Shoe Anchor 2 1259-N-274 15 ABS Sensor 1 A-3237-Z-1196 16 Bushing Sensor 1 2237-Z-1005 17 Spring 2 2258-H-1230 18 Brake Shoe Roller 1 2297-T-7222 14
MX-120-EVO FIGURE 6 Item Description Qty. Part Number Comments 1 Slack Adjuster Assembly 2* A2-3275-A-1249S Contains items 94, 95, 97, 98, 99 and 100. 2 Slack Adjuster 1 A1-3275-A-1249 3 Clevis 1 1245-Z-1066 Standard clevis. For use on ALL LH and on RH in combination with 3299-Y-7149. 3A Clevis Offset 1 1245-H-1074 Offset clevis. For use on RH in combination with 3299-Q- 7349 ONLY. 4 Clevis Pin Large 1 19-X-1116 5 Clevis Pin Small 1 19-X-127 6 Clip Large 1 2257-D-1174 7 Clip Small 1 2257-C-1173 *NOTE: All LH slack adjusters can be ordered as assembly A2-3275-A-1249S. The RH slack adjusters can also be ordered as assembly A2-3275-A-1249S if they have standard clevises. RH slack adjusters with OFFSET clevises must be ordered as separate components (Items 94, 96, 97, 98, 99 and 100). 15
MX-120 & MX-120HR FIGURE 7 STEERING ARMS Steering Arm (44) ALL/ALR (mm) AHL/ALR (mm) TBDL/TBDR (mm) TBUL/TBUR (mm) OFFSET (mm) 3133-E-8325 279.4 230.1 26.49 12.7 LH ONLY 3133-L-8514 279.4 230.1 26.49 0.0 LH ONLY 3133-U-8627 297.0 230.1 26.49 12.7 LH ONLY 3133-E-8767 279.4 191.7 26.49 0.0 LH ONLY 3133-L-8826 297.0 193.0 26.60 12.7 LH ONLY Comments 3133-X-9020 297.0 230.1 26.49 12.7 LH ONLY. Same as 3133-U-8627 with clearance cut out for steering linkage. 3133-X-9046 254.0 230.1 26.49 0.0 RH ONLY CARRIERS MX-120 & MX-120HR Axle Model MX-10-120 MX-12-120 MX-14-120 MX-10-120HR MX-12-120HR MX-14-120HR MX-16-120HR Differential Style Standard less Thrust Screw Standard with Thrust Screw Standard with Thrust Screw HR Carrier Assembly (Less Yoke) Available Ratios A69-3200-C-1745 3.31, 3.58, 3.73, 3.91, 4.10, 4.30, 4.56, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.83, 7.17 A19-3200-G-1749 3.31, 3.58, 3.73, 3.91, 4.10, 4.30, 4.56, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.83, 7.17 C7-3200-G-1749 4.88, 5.57, 6.14, 6.83 NOTE: Reference PB-9396 for individual carrier components. 16
MX-120-EVO FIGURE 8 STEERING ARMS Steering Arm (44) ALL/ALR (mm) AHL/ALR (mm) TBDL/TBDR (mm) TBUL/TBUR (mm) OFFSET (mm) 3133-P-9402 279.4 230.1 26.49 0.0 LH ONLY 3133-Q9402 297.0 230.1 26.49 12.7 LH ONLY Comments CARRIERS MXU-120 Axle Model MXU-10-120 MXU-12-120 MXU-14-120 Differential Style Standard less Thrust Screw Standard with Thrust Screw Carrier Assembly (Less Yoke) Available Ratios A69-3200-C-1745 3.31, 3.58, 3.73, 3.91, 4.10, 4.30, 4.56, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.83, 7.17 A19-3200-G-1749 3.31, 3.58, 3.73, 3.91, 4.10, 4.30, 4.56, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.83, 7.17 NOTE: Reference PB-9396 for individual carrier components. 17
5-X-1429...5 10-X-1594...3, 11 10-X-1602...7, 13 10-X-1603...7, 13 19-X-127...9, 15 19-X-1116...9, 15 20-X-2390...3 20-X-2392...3 26-X-227...5, 13, 14 40-X-1236...7, 13 45-X-1093...13 264-S-1449...8 592A...3 594A...3 1199-B-3226...5 1199-H-1620...11 1199-N-1860...11, 14 1199-T-3166...3 1205A-1587...13 1205-A-1743...5 1205-Z-2652...14 1225-B-496...8 1225-B-834...8 1225-B-1562...13 1225-G-1593...11 1225-H-1568...11 1225-J-1362...11 1225-L-1442...5, 7, 13 1225-R-1344...3 1225-U-1191...7 1227-D-1018...3 1227-H-346...11 1227-K-1025...3 1227-V-516...11 1227-Z-1378...3, 11 1228-K-1805...11 1228-N-1808...11 1228-T-1814...11 1228-U-1815...11 1229-A-2653...7 1229-A-2653...13 1229-B-1848...3 1229-C-1511...7 1229-D-2942...11, 14 1229-G-1511...13 1229-K-1597...11 1229-K-1597P...3 1229-M-1625...5 1229-N-4590...11, 14 1229-R-1058...11 1229-S-2697...3, 11, 14 1229-T-1554...13 1229-T-4102...8 1229-U-1503...3, 5, 11, 13 1229-V-1556...13 1229-W-1557...3 1229-W-4807...3, 11 1229-X-1116...3 1229-X-3118...8 1245-H-1074...9, 15 1245-Z-1066...9 1245-Z-1066...15 1246-Z-390...7 1250-E-473...7, 13 1250-L-220...13 1250-V-1218...7 1259-N-274...8, 14 2210-D-8584...8 18 NUMERICAL PARTS LISTING PART NUMBER PAGE PART NUMBER PAGE PART NUMBER PAGE 2210-E-8585...8 2210-U-8315...14 2210-V-8316...14 2237-A-1223...13 2237-Q-1005...3, 14 2257-C-1173...9, 15 2257-D-1174...9, 15 2258-H-1230...8, 14 2258-Y-1273...8, 14 2297-T-7222...8, 14 2618...3 2803-D-4112...11 2803-E-4113...11 2803-F-4114...11 2803-L-3444...5, 7 2803-M-3445...5, 7 2803-N-3446...5, 7 3105-B-210...8 3133-E-8325...16 3133-E-8767...16 3133-L-8514...16 3133-L-8826...16 3133-P-9402...13, 17 3133-Q-9402...17 3133-U-8627...16 3133-X-9020...16 3133-X-9046...16 3219-N-5942...3 3223-J-1024...13 3223-L-1026...13 3237-V-1062...3, 11 3262-G-1255...5 3264-N-118...14 3264-P-1290...8 3264-Q-1291...8 3264-T-1450...8 3266-A-1457...7 3266-Z-1456...3 3266-Z-1456...11 3270-R-1084...3 3270-W-1115...11 3299-Q-7349...5 3299-S-7481...13 3299-T-7482...13 3299-X-7148...5 3299-Y-7149...5 3305-S-1449...7 16193-000000...11 52400...3 9001989...11 85123370098...11 A1-3275A-1249...9, 11 A1-3275-A-1249...15 A2-3102-G-3465...5 A2-3102-N-3472...5 A2-3102-Y-3457...5 A2-3102-Z-3458...5 A2-3275-A-1249S...9, 15 A4-3222-Z-2288...8 A8-3222-P-2200...8 A19-3200-G-1749...16, 17 A22-3222-Z-2288...8 A29-3222-Z-2288...8 A67-3276-T-20...5 A69-3200-C-1745...16, 17 A88-3276-X-24...5 A-333-R-4230...3 A-1199-W-4053...7, 13 A-1205-N-1392...11 A-1205-P-2434...3 A-1205-U-2647...7, 13 A-1205-V-1556...3, 11 A-1205-V-2648...7, 11, 14 A-1205-X-2650...11 A-1228-P-2457...13 A-1228-X-1220...5 A-2237-B-1328...5 A-3102-G-3465...5 A-3102-N-3472...5 A-3102-Y-3457...5 A-3102-Z-3458...5 A-3111-A-3875...5 A-3111-A-4629...11, 14 A-3111-B-3876...5 A-3111-B-4630...11 A-3111-C-3877...5 A-3111-C-4631...11 A-3111-Z-3874...5 A-3111-Z-4628...11, 14 A-3144-E-524...13 A-3144-E-525...13 A-3205-W-1115...7 A-3205-X-1116...7 A-3211-M-5733...8 A-3213-M-1937...3 A-3213-T-2256...11 A3237-Z-1196...14 A-3237-Z-1248...5, 11 A-3302-D-1044...13 A3302-E-1045...13 A-3302-F-1046...13 A-23102-Y-3457...13 A-673276-T-20...13 C7-3200-G-1749...16 N-39-1...5, 13, 14 N-310-1...13 NL-210-1...5 P112...13 QP6-1655-449...3 QP6-1655-450...3 QP6-1655-451...3 QP6-1655-452...3 QP6-1655-729...3 QP6-1655-730...3 QP6-1656-781...3 QP6-1656-782...3 QP6-1656-1113...3 QP6-1656-1114...3 R002560...3 R230068...5 R230069...5 R955459...3 S-264B...8, 14 S-268-P-2...3, 11 S-1225-S-1189...3 S-2812A-2...7 S-21014A-2...11 S-21020A-2...3 S-21214...13 S-21214A-2...5 S-21422A-2...13 S-21424A-2...5 SR301-4715QP...8 TP-0690...7 WA-310...11
MERITOR AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship (but not against damage caused by accident, abuse or improper installation, maintenance or repair) when such parts are used on vehicles the specifications of which have been approved by our Engineering Department. As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of charge, or take back the nonconforming parts and refund the monies paid by buyer for such parts, if found on examination by us to be nonconforming and if any necessary return charges are prepaid. If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on account thereof from remittances on current accounts while claims are in the process of disposition. Any expense incurred without our consent for repairs or replacement will not be allowed. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. Only genuine Meritor replacement parts are covered by this aftermarket parts warranty. 19
Vehicle models, brands and names depicted herein are the property of their respective owners, and are not in any way associated with Meritor, Inc., or its affiliates. Meritor Heavy Vehicle Systems, LLC 7975 Dixie Highway Florence, Kentucky 41042 USA 888-725-9355 U.S. 800-387-3889 Canada MeritorPartsOnline.com meritor.com 2015 Meritor, Inc. Litho in USA, PB-02167 Revised 11-15 (FLOA)