Product Summary Flow Meters TM Hydraulic Diagnostic Products RACINE FEDERATED INC. ISO 91 : FILE N. A6856
Variable Area Flow Meters Basic In-line Flow Meters Hedland offers a complete line of over 15, variable area flow meters to measure oil, phosphate esters, water and water-based fluids, as well as air and other compressed gases. In addition to the basic in-line model, these variable area flow meters are available in high temperature models and test kits with pressure gauge. Rugged, durable construction featuring aluminum, brass and stainless steel bodies Most models available in sizes from 1 /4" to 3" Accuracy of ±2% of full scale Temperatures to 24 F (116 C); 4 F (4 C) for high temperature models Pressures up to 6 psi (414 bar) Operates in any position No flow straighteners or special piping required 36 rotatable scales Custom scales available Flow-Alert Flow Switches The Flow-Alert flow switches provide both visual flow indication and the capability to signal alarms, open or close circuits, trigger warning lights and buzzers, and shut down pumps or other equipment. Micro switch (latching) or reed switch (proximity) models available Choice of one or two switches per meter Available in meter sizes from 1 /4" to 1 1 /2" Accuracy of ±2% of full scale MR Flow Transmitters The MR flow transmitters feature non-contact sensor electronics and are designed to operate as part of a totally integrated electronic process control /data acquisition system. Digital flow rate and total flow indication In-field compensation for application specific fluid parameters eliminates the need for custom scales Provides 4- ma, -1 Vdc or -5 Vdc analog output CE compliant EZ-View In-line Flow Meters The EZ-View product line is a reliable, trouble-free flow rate indicator for low pressure applications. Constructed of high-impact polysulfone plastic, these meters provide a low cost, rugged flow measurement solution for both liquid and air/gas applications. End fittings in brass, 33 stainless steel or PVC Available in sizes from 1 /2" to 2" Temperatures to 25 F (121 C) Pressures up to 325 psi (22.4 bar) Accuracy of ±5% of full scale Flow-Alert TM models available 2 TEL. 8-433-5263 hedland.com
Flo-Check USB Hydraulic System Analyzer Flow accuracy ±1% of reading @ 32 cst Field selectable US or metric readings High and low set point alarms for flow, pressure and temperature Captures pressure spikes up to 1, PSI (.2 milliseconds duration) Exports saved data to Microsoft Excel and other spreadsheet programs USB powered Easy to use, plug and play Calculates hydraulic power Select continuous monitoring or capture data manually Logs up to 12 hours Records alarm history The Flo-Check Hydraulic System Analyzer can be used as a stationary or portable tester for both industrial and mobile hydraulic system diagnostics, and analysis of the prognostic health of a hydraulic system. It features flow, pressure and temperature sensors that are monitored by a data acquisition module. This module records the operating parameters of the system and transfers them to the user s laptop via the USB port. The custom software utility is a Windows -based application which is compatible with Windows Vista, Windows XP and Windows. This intuitive software configures the displayed information into user-selected engineering units and provides real-time graphics with instantaneous readings and trends for all three measurement parameters. The software also permits the data to be saved for export into a spreadsheet program. The Hydraulic System Analyzer is powered through the USB port of a PC, making it easy to set up and ideal for portable applications. Interfaced to the PC application, the Hydraulic Analyzer offers a straightforward method of monitoring system parameters complete with data acquisition. SPECIFICATIONS Performance Flow: Accuracy ±1% of reading @ 32 cst Repeatability ±.2% Pressure: Accuracy <±.5% BFSL Stability <±.25% of full scale Zero Offset <±2% of full scale TC Zero and TC Span <±1.5% of full scale Response Time.2 milliseconds Temperature: Calibration Error (25 C) ±1 C Absolute Error (over full range of sensor, to 15 C) Without Calibration ±3 C With Calibration ±1.6 C Nonlinearity ±.4 C Repeatability ±.1 C Data Acquisition: Sample Rate 1 khz PC Screen Update/Record Rate Flow 1 second (average 1K samples) Temperature 1 second (average 1K samples) Pressure 1 second (min, max, average 1K samples) Power USB Power: +5 VDC (supplied through USB port of a PC) USB Voltage Tolerance: +4.6 VDC min, +5.25 VDC max Current: 1 ma, typ Environmental Pressure Rating: 6 PSI (414 Bar) maximum with a 3:1 safety factor; capable of 1, PSI transients Operating Pressure: <6 PSI (414 Bar, 41.4 MPa, 4 kg/cm²); capable of 1, PSI transients Internal Valve By-pass: 75 PSI P Pressure Drop: See P charts on page 14 Fluid Temperature: -4 to +3 F (-4 to +15 C) Ambient Temperature: +32 to +185 F ( to +85 C) Storage Temperature: -4 to +185 F (-4 to +85 C) Humidity: -9%, non-condensing Material Housing: Turbine Rotor: Rotor Supports: Seals: Ball Bearings: Hub Cones: Temperature Probe: Valve: Spool/Sleeve: Magnetic Pick-up: Body Nut Electronic Case: Ports: 613-T351 Aluminum; anodized T416 Stainless steel Viton standard; EPR optional 44C Stainless steel 12L14 Steel body with 33 SS seat 12L14 Steel 12L14 Steel; electroless nickel plate 12L14 Steel; electroless nickel plate Cold rolled steel; black zinc plate with clear seal SAE Straight thread O-ring boss, female, J1926/1; ISO1179 (BSPP) Windows, Vista and Excel are registered trademarks of Microsoft Corp. Viton is a registered trademark of DuPont Dow Elastomers. 4 Tel 8-433-5263 MEASURE SYSTEM PERFORMANCE
Flo-Check USB Hydraulic System Analyzer SOFTWARE The Flo-tech Analyzer software provides a real-time graphical and digital interface for monitoring and/or recording pressure, temperature and flow rate parameters from the Hydraulic Analyzer. In addition to the graphical and digital displays, the main screen also consists of a menu bar, buttons with common functions and alarm indicators. The software offers the following options: View real time pressure, temperature, flow rate and power measurements Record all measurements to a file Choice of recording all measurement points or capturing points manually Selection of all measurement units, US or metric Ability to adjust display of graph data High/Low alarm indicators set by the operator All measurements taken can be saved once per second to a comma separated value (.csv) file for export into a spreadsheet program. For example, recording for 2 minutes would yield 1 points of data. Even though data points are only recorded once per second, pressure spikes and dips are captured by recording the maximum or minimum pressure during each measurement period. Therefore, the precise shape of the pressure spike is not recorded but its amplitude and the time it occurred are both recorded. Measurement (over a 1 second time period) Color Indication Graphs The graph on the main screen contains more than 6 points of data. Previous data points are saved in memory and can be viewed at any time. Adjustments can be made to optimize data that is displayed by hiding individual graph plots, adjusting the scale of each plot or adding horizontal gridlines to the graph. Alarms There are three sets of High/Low alarm indicators on the main screen which monitor pressure, temperature and flow rate. Alarm indicators flash if the current system measurements exceed the alarm limits set by the operator and continue to flash when the current system measurements return to normal to alert the operator that an alarm condition occurred. Alarms must be reset manually to acknowledge the alarm condition. ORDERING INFORMATION ¹ NOMINAL PORT SIZE FLOW RANGE F716 SAE 16 3-85 GPM F7161 SAE 24 7-199.9 GPM F7162 G 1 15-321 LPM F7163 G 1-1/2 26-757 LPM File View Options Tools About ¹ Each Flo-Check Hydraulic System Analyzer includes a 16.4 ft. (5 M) USB, A male to B male (IP 68) connection cable, CD-Rom of the software utility, and complete operating instructions packaged in a protective carrying case. Pressure Alarms Temp Alarms Flow Alarms Horse Power High/Low High/Low High/Low 245. 11.4 61.1 87.3 PSI F GPM HP View History Pressure Avg PressureMin PressureMax Temp Flow 5. PSI 3. F. GPM 45. PSI 27. F 18. GPM 4. PSI 24. F 16. GPM 35. PSI 21. F 14. GPM 3. PSI 18. F 1. GPM 25. PSI 15. F 1. GPM. PSI 1. F 8. GPM 15. PSI 9. F 6. GPM 1. PSI 6. F 4. GPM 5. PSI 3. F. GPM PSI. F. GPM 99.s 1.s 11.s 1.s 13.s 14.s Elapsed Time=:17:28 Alarm Indication Digital Indication Log Interval 4 Hours Minutes Graphical Display Record to File Average Pressure Green Minimum Pressure Dark Green Maximum Pressure Dark Green Average Temperature Blue Average Flow Rate Yellow Average Power Orange ACCESSORIES DESCRIPTION DESCRIPTION F119 5-Point Calibration Certificate ² F1614-75 Pressure Relief Disc, 75 PSI (1 per Tester) F111 1-Point Calibration Certificate ² ² Certificates are traceable to NIST, ISO 91. Run Clear Graph STOP Record Stop Reset Alarms Test Period Seconds 144 TRACEABLE TO NIST STANDARDS Fax 8-245-3569 5
PFM6 Digital Portable Hydraulic Tester Five flow ranges Large 3-1/2 digit LCD for flow and temperature Helical tube pressure gauge One toggle switch to control power and select flow and temperature Loading valve with fingertip control of pressure Platinum resistance temperature sensor Pressure surge protection Turbine flow sensor provides fast response Available with SAE or BSPP ports Pressures up to 6 PSI (414 Bar) Temperatures up to 3 F (15 C) Flow accuracy ±1% of full scale Repeatability ±.2% The PFM6 Series is a compact, lightweight portable tester designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components. These self-contained testers feature laboratory accuracy and provide flow, pressure and temperature measurements simultaneously from one point. Simple operation includes a toggle switch to display either flow or temperature readings and a loading valve that operates with fingertip control. The dual scale helical tube pressure gauge offers pulsation dampening and high overpressure capacity. For safe operation, all testers include pressure surge protection. SPECIFICATIONS Performance Flow Accuracy: ±1% of full scale Repeatability: ±.2% Turbine Response: ms Temperature: Fluid -4 to +3 F (- to +15 C) Ambient -4 to +131 F (- to +55 C) Flow Readout: Linearity and zero shift ±1 digit Operating Pressure: up to 6 PSI (414 Bar, 41.4 MPa, 4 kg/cm 2 ) Pressure Drop: See P charts on page 14 Readout Accuracy: ±1 digit Material Housing: Turbine Rotor: Ball Bearings: Rotor Shaft: Rotor Supports: PFM6-15/3 PFM6-6/85/ Hub Cones: Valve Body: PFM6-15/3 PFM6-6/85/ Valve Stem: Poppet: Sleeve: PFM6- only Temperature Probe: Pick-up: Body Nut Seals: Carrying Handle: Electronic Case & Cover: Battery: Ports: 613-T651 Aluminum; anodized T416 Stainless steel 44C Stainless steel CA36 Brass Cold rolled steel; zinc plate, dichromate finish 12L14 Steel; zinc plate, dichromate finish 12L14 Steel; hardened D.O.M. steel tube Magnetic 12L14 Steel; electroless nickel plate 12L14 Steel; electroless nickel plate Buna N standard; Viton and EPR optional Cast aluminum; anodized Cold rolled steel; zinc plate with clear seal, epoxy black paint 4 AA size alkaline, ~ 5 hours of service SAE Straight thread O-ring boss, female J1926/1; ISO1179 (BSPP) Viton is a registered trademark of DuPont Dow Elastomers. 6 Tel 8-433-5263 HYDRAULIC SYSTEM DIAGNOSTIC TOOLS
PFM6 Digital Portable Hydraulic Tester DIMENSIONS A LENGTH B DEPTH C HEIGHT WEIGHT LBS (KG) PFM6-15 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) PFM6-3 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) PFM6-6 11.5 (292) 3.5 (89) 9.8 (249) 16.5 (7.5) PFM6-85 11.5 (292) 3.5 (89) 9.8 (249) 16.5 (7.5) PFM6-12.3 (311) 4. (11) 1.3 (262). (9.1) ORDERING INFORMATION NOMINAL PORT SIZE FLOW RANGE PFM6-15 SAE 12 1-15 GPM F58 PFM6-3 SAE 12 2-3 GPM F579 PFM6-6 SAE 16 3-6 GPM F578 PFM6-85 SAE 16 4-85 GPM F577 PFM6- SAE 24 7-199.9 GPM F576 PFM6-15 G 3/4 4-56 LPM F511 PFM6-3 G 3/4 7.5-113.6 LPM F5111 PFM6-6 G 1 12-227 LPM F5112 PFM6-85 G 1 15-321 LPM F5113 PFM6- G 1-1/2 26-757 LPM F5114 STD or CE Leave blank for standard model or CE for CE option PRESSURE GAUGE UNITS OF MEASURE PSI BAR MPA KG/CM2 Examples: F576-PSI = PFM6- SAE 24 ports 7-199.9 GPM flow range Standard model PSI pressure units F5111CE-BAR = PFM6-3 G 3/4 ports 7.5-113.6 LPM flow range CE certified Bar pressure units ACCESSORIES DESCRIPTION F4934-153 Carrying Case PFM6-15 & PFM6-3 F4934-685 Carrying Case PFM6-6 & PFM6-85 F4934- Carrying Case PFM6- F1614-75 Pressure Relief Disc, 75 PSI (1 per Tester) All PFM6s F119 5-Point Calibration Certificate ¹ All PFM6s F111 1-Point Calibration Certificate ¹ All PFM6s ¹ Certificates are traceable to NIST, ISO 91. FIVE OR TEN POINT CALIBRATION AVAILABLE Fax 8-245-3569 7
PFM6BD Bi-Directional Hydraulic Tester Bi-directional in-line testing capabilities in three flow ranges Large 3-1/2 digit LCD for flow and temperature Helical tube pressure gauge One toggle switch to control power and select flow and temperature Loading valve with fingertip control of pressure Platinum resistance temperature sensor Pressure surge protection with internal pressure relief Turbine flow sensor provides fast response SAE ports Pressures up to 6 PSI (414 Bar) Temperatures up to 3 F (15 C) Flow accuracy ±1% of full scale Repeatability ±.2% The PFM6BD Series includes all the features of the standard PFM6 Series with the added benefit of bi-directional flow measurement and an internal pressure relief system. Designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components, these compact testers offer laboratory accuracy and provide flow, pressure and temperature measurements simultaneously from one point. SPECIFICATIONS Performance Flow Accuracy: Forward ±1% of full scale Reverse ±2% of full scale Repeatability: ±.2% Turbine Response: ms Temperature: Fluid -4 to +3 F (- to +15 C) Ambient -4 to +131 F (- to +55 C) Flow Readout: Linearity and zero shift ±1 digit Operating Pressure: up to 6 PSI (414 Bar, 41.4 MPa, 4 kg/cm 2 ) Pressure Drop: See P charts on page 14 Readout Accuracy: ±1 digit Material Housing: Turbine Rotor: Ball Bearings: Rotor Shaft: Rotor Supports: Hub Cones: Valve Body: Valve Stem: Spool/Sleeve: Temperature Probe: Magnetic Pick-up: Body Nut Seals: Carrying Handle: Electronic Case & Cover: Battery: Ports: 613-T651 Aluminum; anodized T416 Stainless steel 44C Stainless steel 12L14 Steel; zinc plate, dichromate finish 434 Alloy steel; hardened 12L14 Steel; electroless nickel plate 12L14 Steel; electroless nickel plate Buna N standard; Viton and EPR optional Cast aluminum; anodized Cold rolled steel; zinc plate with clear seal, epoxy black paint 4 AA size alkaline, ~ 5 hours of service SAE Straight thread O-ring boss, female J1926/1 Viton is a registered trademark of DuPont Dow Elastomers. 8 Tel 8-433-5263 RUGGED CONSTRUCTION
DIMENSIONS PFM6BD Bi-Directional Hydraulic Tester A LENGTH B DEPTH C HEIGHT WEIGHT LBS (KG) PFM6BD-6 11.3 (287) 3.5 (89) 1.1 (256) 16.5 (7.5) PFM6BD-85 11.3 (287) 3.5 (89) 1.1 (256) 16.5 (7.5) PFM6BD- 11.8 (3) 4. (11) 1.6 (268) 19.5 (9.) ORDERING INFORMATION NOMINAL PORT SIZE FLOW RANGE STD or CE PRESSURE GAUGE UNITS OF MEASURE PFM6BD-6 SAE 16 3-6 GPM (12-227 LPM) F582 Leave blank for PFM6BD-85 SAE 16 4-85 GPM (15-321 LPM) F583 standard model or PFM6BD- SAE 24 7-199.9 GPM (26-757 LPM) F584 CE for CE option PSI BAR MPA KG/CM2 Examples: F583-PSI = PFM6BD-85 SAE 16 ports 4-85 GPM (15-321 LPM) Standard model PSI pressure units F582CE- PSI = PFM6BD-6 SAE 16 ports 3-6 GPM (12-227 LPM) CE certified PSI pressure units ACCESSORIES DESCRIPTION F4934-685 Carrying Case PFM6BD-6 & PFM6BD-85 F4934- Carrying Case PFM6BD- F1614-75 Pressure Relief Disc, 75 PSI (2 per Tester) All PFM6BDs F119 5-Point Calibration Certificate ¹ All PFM6BDs F111 1-Point Calibration Certificate ¹ All PFM6BDs ¹ Certificates are traceable to NIST, ISO 91. DEPENDABLE CUSTOMER SERVICE Fax 8-245-3569 9
PFM8 Digital Hydraulic Tester & Dynamometer Simultaneously Measures Flow, Pressure, Power and Temperature SPECIFICATIONS Performance Flow Accuracy: ±1% of full scale Repeatability: ±.2% Turbine Response: ms Temperature: Fluid -4 to +3 F (- to +15 C) Ambient -4 to +131 F (- to +55 C) Flow Readout: Linearity and zero shift ±1 digit Operating Pressure: up to 6 PSI (414 Bar, 41.4 MPa, 4 kg/cm 2 ) Pressure Drop: See P charts on page 14 Readout Accuracy: ±1 digit Five flow ranges Front panel selectable US or metric readings Dynamometer reads power (HP & kw) directly 3-1/2 digit LCDs for digital display of flow, temperature, pressure and power Large easy-to-use membrane switch Loading valve with fingertip control of pressure Silicon strain gauge pressure sensor Platinum resistance temperature sensor Pressure surge protection Turbine flow sensor provides fast response Pressures up to 6 PSI (414 Bar) Temperatures up to 3 F (15 C) Flow accuracy ±1% of full scale Repeatability ±.2% The all digital PFM8 Series combines a compact, lightweight hydraulic tester and a dynamometer in one unit. Designed for fast diagnostic troubleshooting of all types of hydraulic systems and components, including enginepump combinations. These testers make all flow, temperature, pressure and power measurements from one point. A bonus feature of this series is the capability to switch from US to metric units of measure in the field. Each tester utilizes two digital displays, one for flow and temperature and a second display for pressure and power. Simple operation includes a large format membrane switch for on/off control and selection of units of measure to be displayed. A loading valve with fingertip control and pressure surge protection are standard features. Material Housing: Turbine Rotor: Ball Bearings: Rotor Shaft: Rotor Supports: PFM6-15/3 PFM6-6/85/ Hub Cones: Valve Body: PFM6-15/3 PFM6-6/85/ Valve Stem: Poppet: Sleeve: PFM6- only Temperature Probe: Magnetic Pick-up: Body Nut Seals: Carrying Handle: Electronic Case & Cover: Battery: Ports: 613-T651 Aluminum; anodized T416 Stainless steel 44C Stainless steel CA36 Brass Cold rolled steel; zinc plate, dichromate finish 12L14 Steel; zinc plate, dichromate finish 12L14 Steel; hardened D.O.M. steel tube 12L14 Steel; electroless nickel plate 12L14 Steel; electroless nickel plate Buna N standard; Viton and EPR optional Cast aluminum; anodized Cold rolled steel; zinc plate with clear seal, epoxy black paint AA size alkaline, ~ 5 hours of service SAE Straight thread O-ring boss, female J1926/1 Viton is a registered trademark of DuPont Dow Elastomers. 1 Tel 8-433-5263 RELIABLE FLOW MEASUREMENT
PFM8 Digital Hydraulic Tester & Dynamometer Simultaneously Measures Flow, Pressure, Power and Temperature DIMENSIONS A LENGTH B DEPTH C HEIGHT WEIGHT LBS (KG) PFM8-15 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) PFM8-3 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) PFM8-6 11.5 (292) 3.5 (89) 9.8 (249) 16.5 (7.5) PFM8-85 11.5 (292) 3.5 (89) 9.8 (249) 16.5 (7.5) PFM8-12.3 (311) 4. (11) 1.3 (262). (9.1) ORDERING INFORMATION NOMINAL PORT SIZE FLOW RANGE POWER HP (kw) PFM8-15 SAE 12 1-15 GPM (4-56 LPM) 52.5 (39) F561 PFM8-3 SAE 12 2-3 GPM (7.5-113.6 LPM) 15 (78) F558 PFM8-6 SAE 16 3-6 GPM (12-227 LPM) 21 (157) F552 PFM8-85 SAE 16 4-85 GPM (15-321 LPM) 298 (222) F553 PFM8- SAE 24 7-199.9 GPM (26-757 LPM) 7 (522) F554 Examples: F561 = PFM8-15 SAE 12 ports 1-15 GPM (4-56 LPM) F553 = PFM8-85 SAE 16 ports 4-85 GPM (15-321 LPM) ACCESSORIES DESCRIPTION F4934-153 Carrying Case PFM8-15 & PFM8-3 F4934-685 Carrying Case PFM8-6 & PFM8-85 F4934- Carrying Case PFM8- F1614-75 Pressure Relief Disc, 75 PSI (1 per Tester) All PFM8s F119 5-Point Calibration Certificate ¹ All PFM8s F111 1-Point Calibration Certificate ¹ All PFM8s ¹ Certificates are traceable to NIST, ISO 91. TRACEABLE TO NIST STANDARDS Fax 8-245-3569 11
Sensor Array with Load Valve Four flow ranges Analog (4- ma or -5 VDC) or pulse output for flow rate Silicon strain gauge pressure sensor with 4- ma output Platinum resistance temperature sensor with 4- ma output Loading valve with fingertip control of pressure Pressure surge protection Turbine flow sensor provides fast response Pressures up to 6 PSI (414 Bar) Temperatures up to 3 F (15 C) Flow accuracy ±1% of reading @ 32 cst Repeatability ±.2% The Sensor Array is used for diagnostic evaluation of hydraulic motors, pumps, valves, hydrostatic drives and cylinders. When performed as part of a routine preventative maintenance program, catastrophic or untimely repairs are minimized. All that is required is to make quick and easy fluid line connections between the sensing array and appropriate locations in the hydraulic circuit. The load valve is used to create a restriction so that a relief valve setting or internal leakage of a valve or hydraulic cylinder can be determined. The efficiency of a hydraulic pump or motor can be similarly established and compared to factory specifications. 12 Tel 8-433-5263 SPECIFICATIONS Performance Flow Accuracy: ±1% of reading @ 32 cst Repeatability: ±.2% Temperature: Fluid -4 to +3 F (- to +15 C) Ambient Operating Pressure: -4 to +131 F (- to +55 C) up to 6 PSI (414 Bar, 41.4 MPa, 4 kg/cm 2 ) Pressure Drop: See P charts on page 14 IFC Signal Converter, Option: F to I F to V Power: Loop powered, 6V 1 to 26 VDC insertion loss max 1 to 3 VDC supply range Inputs: Magnetic Pick-up Magnetic Pick-up Frequency to 35 Hz to 35 Hz Trigger Sensitivity 3 mv p-p 3 mv p-p Frequency Measurement Accuracy ±1% ±1% Analog Output: 4- ma current loop -5 VDC Resolution 1:4 1:4 Temperature Drift 5 ppm / C max 5 ppm / C max Response 1.6 seconds min 1.6 seconds min Environmental: Ambient Temperature -22 to +158 F -22 to +158 F (-3 to +7 C) (-3 to +7 C) Humidity -9%, -9%, non-condensing non-condensing Magnetic Pick-up, Option: Electrical Output Signal Self-generating alternating pulse 1 mv RMS (1 Hz) minimum Pressure Sensor: See page 26 for complete specifications (optional) Temperature Sensor: See page 27 for complete specifications (optional) Material Housing: 613-T651 Aluminum; anodized Turbine Rotor: T416 Stainless steel Ball Bearings: 44C Stainless steel Rotor Shaft: Rotor Supports: PFM6-15/3 CA36 Brass PFM6-85/ Hub Cones: Valve Body: PFM6-15/3 Cold rolled steel; zinc plate, dichromate finish PFM6-85/ 12L14 Steel; zinc plate, dichromate finish Valve Stem: Poppet: 12L14 Steel; hardened Sleeve: PFM6- only D.O.M. steel tube Temperature Probe: Magnetic Pick-up: Body 12L14 Steel; electroless nickel plate Nut 12L14 Steel; electroless nickel plate Seals: Buna N standard; Viton and EPR optional Carrying Handle: Cast aluminum; anodized Ports: SAE Straight thread O-ring boss, female J1926/1; ISO1179 (BSPP) Viton is a registered trademark of DuPont Dow Elastomers. MEASURE SYSTEM PERFORMANCE
DIMENSIONS Sensor Array with Load Valve A LENGTH B DEPTH C HEIGHT WEIGHT LBS (KG) F615 / F6161 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) F6153 / F6163 11.3 (287) 3.5 (89) 9.8 (249) 13.85 (6.3) F6156 / F6165 11.5 (292) 3.5 (89) 9.8 (249) 16.5 (7.5) F6159 / F6167 12.3 (311) 4. (11) 1.3 (262). (9.1) ORDERING INFORMATION NOMINAL PORT SIZE FLOW RANGE FLOW TRANSDUCER SEALS TEMPERATURE PRESSURE SAE 12 1-15 GPM F615 SAE 12 2-3 GPM F6153 SAE 16 4-85 GPM F6156 SAE 24 7-199.9 GPM F6159 G 3/4 4-56 LPM F6161 G 3/4 7.5-113.6 LPM F6163 F Frequency (Mag Pick-up) I 4- ma Out (IFC) V -5 VDC Out (IFC) B Buna N V Viton E EPR T with Sensor G G 1/4 (F) Plugged SAE 2 (J514) Plugged 1 1 PSI (69 Bar) Sensor 3 3 PSI (7 Bar) Sensor 5 5 PSI (345 Bar) Sensor 6 6 PSI (414 Bar) Sensor G G 1/4 (F) Plugged 1/4 NPTF (F) Plugged G 1 15-321 LPM F6165 G 1-1/2 26-757 LPM F6167 Examples: F615-I B - T 6 = SAE 12 ports 1-15 GPM flow range 4- ma output Buna N seals Temperature sensor 6 PSI (414 Bar) pressure sensor F6165-F V- G 5 = G 1 ports 15-321 LPM flow range Frequency output Viton seals G 1/4 (F) plugged temp port 5 PSI (345 Bar) pressure sensor ACCESSORIES DESCRIPTION F1614-75 Pressure Relief Disc, 75 PSI (1 per Sensor) F119 5-Point Calibration Certificate ¹ F111 1-Point Calibration Certificate ¹ ¹ Certificates are traceable to NIST, ISO 91. All Sensor Arrays For information about Refer to Digital Displays Form No. 549 Pressure Sensors Page 26 Temperature Sensor Page 27 Cables Pages 28 & 29 Viton is a registered trademark of DuPont Dow Elastomers. FIVE OR TEN POINT CALIBRATION AVAILABLE Fax 8-245-3569 13
Flow vs Pressure Drop Charts Flo-Check USB, PFM Series and F61 Sensor Arrays 6 PFM6-15, PFM8-15, F615, F6161 3 PFM6-3, PFM8-3, F6153, F6163 5 4 3 25 15 1 1 5 5 1 15 1 3 4 6 PFM6-6, PFM8-6 1 PFM6-85, PFM8-85, F6156, F6165 5 4 3 1 8 6 4 1 1 3 4 5 6 7 1 3 4 5 6 7 8 9 1 3 PFM6 -, PFM8 -, F6159, F6167 1 PFM6BD - 6 25 15 1 1 8 6 4 FORWARD REVERSE 5 4 6 8 1 1 14 16 18 2 1 3 4 5 6 7 6 PFM6BD - 85, F716, F7162 4 PFM6BD -, F7161, F7163 5 4 3 FORWARD REVERSE 35 3 25 15 FORWARD REVERSE 1 1 5 1 3 4 5 6 7 8 9 1 4 6 8 1 1 14 16 18 2 14 Tel 8-433-5263 TRACEABLE TO NIST STANDARDS
TM Hydraulic Diagnostic Products Flo-Check USB Hydraulic System Analyzer The Flo-Check USB represents the next generation of hydraulic test equipment. The device simultaneously measures flow, pressure, temperature and power within a hydraulic system. This data is displayed and logged through a custom Windows -based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The Flo-Check USB is ideal for testing, troubleshooting and diagnosis in mobile and industrial hydraulic applications, and for setting hydraulic components such as pumps, valves and motors. The unit is bi-directional and includes a low-resistance load valve and internal pressure relief discs. ±1% of full scale accuracy Field selectable US or metric readings High and low set point alarms for flow, pressure, and temperature Captures pressure spikes up to 69 bar (1, psi).2 milliseconds duration Exports saved data to Microsoft Excel and other spreadsheet programs USB powered Easy to use, plug and play Calculates hydraulic power Select continuous monitoring or capture data manually Logs up to 12 hours Records alarm history Flo-tech Portable Hydraulic Testers Flo-tech s compact, self-contained portable hydraulic testers provide fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems. Models available include the versatile PFM6, the PFM6BD for bi-directional applications and the all digital PFM8 which includes a dynamometer. Flow ranges from 1-15 to 7-199.9 GPM (4-56 to 26-757 LPM) Port sizes from SAE 12 to SAE 24 (G 3 /4 to G 1 1 /2) Accuracy of ±1% of full scale (forward flow) Temperatures to 3 F (15 C) Pressures up to 6 psi (414 bar) Flo-tech Turbine Flow Sensors Flo-tech s turbine flow sensors are available in a variety of configurations for measuring flow, as well as temperature and pressure, of hydraulic fluids or other compatible fluids. Four basic models are available Activa, Ultima, Classic and Quad. Flow ranges from.4-7 to 1-35 GPM (1.5-26 to 37-1324 LPM) Port sizes from SAE 8 to SAE, (G 1 /4 to G 1 1 /4); SAE to SAE 24, Code 61; and SAE to SAE 32, Code 62 Available with frequency or analog output for flow Optional pressure and temperature analog outputs Accuracy of ±1% of full scale (forward flow) Temperatures to 3 F (15 C) Pressures up to 6 psi (414 bar) Bi-directional flow measurement available (Quad models) Flo-tech Digital Displays/Signal Processors Flo-tech also offers a line of digital panel displays/signal processors to provide a complete flow measurement package. Various models are available that will accept either the 4- ma signal from Flo-tech s Activa Sensor Array or frequency signal input from the Ultima, Classic and Quad turbine flow sensors. Displays rate and/or total AC, DC, battery and loop powered versions Built-in sensor or transmitter power supply Optional analog output, digital communications and setpoint alarms CE compliant hedland.com MAILING ADDRESS P.O. Box 8158 Racine, WI 5348-158 USA SHIPPING ADDRESS 8635 Washington Avenue Racine, WI 5346-3738 USA TELEPHONE 262-639-677 8-HEDLAND 8-433-5263 FAX 262-639-2267 8-CHK-FLOW 8-245-3569 E-MAIL hedlandsales@racinefed.com HEDLAND, EZ-VIEW, and FLO-CHECK are registered trademarks of Racine Federated Inc. Flow-Alert, Flo-tech and Activa are trademarks of Racine Federated Inc. Victaulic is a registered trademark of Victaulic Company. CSA is a registered trademark of Canadian Standards Association. Windows and Excel are registered trademarks of Microsoft Corp. 9 Racine Federated Inc., all rights reserved. Form No. 315 7/9 Printed in USA Racine Flow Meter Group