MODEL SCS REMOTE CONDENSER

FEATURES REMOTE CONDENSER CONDENSING UNIT MODEL SCS REMOTE CONDENSER FROM 3/4 TO 40 HP MODEL WCS WATER-COOLED CONDENSER FROM 3/4 TO 40 HP 1 WATER-COOLED CONDENSING UNIT SEMI-HERMETIC COMPRESSOR

TABLE OF CONTENTS NOMENCLATURE.............................................................................................................2 STANDARD FEATURES.........................................................................................................3 FACTORY INSTALLED OPTIONS.................................................................................................3 CAPACITY CAPACITY SCS/WCS (008 TO 400) HIGH TEMPERATURE, R-22/R-407C..................................................................4 CAPACITY SCS/WCS (008 TO 300) LOW TEMPERATURE, R-22...........................................................................5 CAPACITY SCS/WCS (008 TO 400) MEDIUM TEMPERATURE, R-404A/R-507...............................................................6 CAPACITY SCS/WCS (008 TO 300) LOW TEMPERATURE, R-404A/R-507.................................................................7 ELECTRICAL DATA ELECTRICAL DATA SCS/WCS (008 TO 400) HIGH AND MEDIUM TEMPERATURES...............................................................8 ELECTRICAL DATA SCS/WCS (008 TO 300) LOW TEMPERATURE...........................................................................9 DRAWINGS MODEL SCS REMOTE INDOOR CONDENSING UNIT.....................................................................................10 MODEL SCS REMOTE INDOOR CONDENSING UNIT (STACKABLE)...........................................................................10 MODEL WCS WATER-COOLED CONDENSING UNIT.....................................................................................11 RECEIVER DATA................................................................................................................11 SPECIFICATIONS.............................................................................................................12 NOMENCLATURE UNIT MODEL S = Remote Condenser W = Water-Cooled Condenser M = Salt-Water Cooled Condenser UNIT TYPE C = Condensing Unit Horizontal Air Flow COMPRESSOR TYPE S = Semi-Hermetic SIZE Nominal Compressor HP SIZE Fractional Compressor HP S C S 10 0 1 H 2 9 REFRIGERANT 2 = R-22 3 = R-134a 4 = R-404A/R-507 7 = R-407C APPLICATION H = High Suction M = Medium Suction L = Low Suction UNIT VOLTAGE 2 = 240/1/60 5 = 208-240/3/60 8 = 575/3/60 9 = 480/3/60 COMPRESSOR 1 = Copeland 2 = Carlyle 5 = Bitzer 2

FEATURES STANDARD FEATURES Heavy-gauge galvanized steel base Liquid receiver with isolating valves and safety relief valve or fusible plug (SCS) Spring mounted semi-hermetic compressor with vibrasorbers Cleanable water-cooled condenser with insulating valve and safety relief Crankcase heaters Electrical control panel complete with compressor contactors, condenser interlock (SCS), control transformer, pump-down switch and terminal block Manual reset, fix, high pressure switch Automatic reset, adjustable low pressure switch with flexible hose Oil failure switch (compressor with positive pressure oil pump) 240/1/60 control circuit FACTORY INSTALLED OPTIONS Liquid line kit complete with liquid drier (sealed or replaceable), sight glass/moisture indicator (installed) and liquid line solenoid valve (shipped loose) Suction filter (sealed or replaceable) Suction accumulator Oil separator including check valve, recommended for 10 F/-23 C room and lower (SCS) Oil separator, recommended for 10 F/-23 C room and lower (WCS) Compressor, rigid mounting without vibrasorbers Non-fused disconnect switch Fused disconnect switch Adjustable dual pressure switch with flexible hoses Compressor discharge thermostat 3-pipe hot gas defrost kit, single evaporator 3-pipe hot gas defrost kit, multiple evaporators (recommended with medium temperature application) Electric defrost timer Electric defrost kit complete with timer, heater and fan contactors, fuses and compressor/heaters interlock switch Air defrost timer 120/1/60 or 24/1/60 control circuit Capacity control: unloading and/or hot gas bypass Programmable electronic controller complete with room thermostat, temperature display, defrost timer, alarm and many programmable operation functions Water regulating valve (WCS) Stackable units Carlyle or Bitzer semi-hermetic compressor Fixed or adjustable flooding valve (SCS) Discharge check valve 3

CAPACITY CAPACITY SCS/WCS (008 TO 400) HIGH TEMPERATURE, R-22/R-407C Model Cond. Saturated Suction Temp. F (Capacity MBH) Line Size Receiver (lb.) Shipping Compressor Temp. 0 5 10 15 20 25 30 35 40 45 Suction Liquid Std Opt Weight (lb.) 100 3.6 4.2 4.8 5.5 6.2 7.1 8.0 8.9 10.1 11.2 008-1H2 110 3.3 3.8 4.4 5.0 5.7 6.5 7.3 8.2 9.2 10.3 KAN2-0075 120 2.9 3.4 4.0 4.6 5.2 5.9 6.7 7.5 8.5 9.4 5/8 3/8 28 68 320 130 2.6 3.0 3.5 4.1 4.7 5.4 6.1 6.8 7.7 8.6 100 5.2 6.0 6.8 7.7 8.7 9.8 11.0 12.2 13.7 15.2 010-1H2 110 4.8 5.5 6.2 7.1 8.0 9.0 10.0 11.3 12.7 14.0 KAR2-0100 120 4.4 5.0 5.7 6.5 7.3 8.2 9.3 10.4 11.6 12.9 5/8 3/8 28 68 325 130 4.0 4.6 5.2 5.9 6.7 7.5 8.4 9.4 10.6 11.8 100 6.4 7.4 8.6 9.8 11.2 12.6 14.1 15.8 17.7 19.6 015-1H2 110 5.8 6.8 7.9 9.1 10.4 11.7 13.1 14.8 16.5 18.2 KAGB-0150 120 5.3 6.2 7.2 8.3 9.5 10.8 12.1 13.6 15.3 17.0 7/8 3/8 28 68 330 130 4.8 5.6 6.6 7.6 8.7 9.9 11.2 12.5 14.1 15.7 100 8.5 10.1 11.8 13.5 15.3 17.2 19.3 21.4 24.0 26.5 020-1H2 110 7.7 9.3 10.9 12.5 14.2 16.1 17.9 20.1 22.5 24.9 KAKB-0200 120 6.9 8.5 10.0 11.6 13.2 15.0 16.8 18.8 21.0 23.3 7/8 3/8 28 68 335 130 6.1 7.6 9.1 10.7 12.2 13.8 15.5 17.3 19.4 21.5 100 15.8 18.1 20.6 23.3 26.1 29.3 32.7 36.5 40.6 44.8 030-1H2 110 14.5 16.6 19.0 21.5 24.3 27.3 30.5 34.0 38.0 41.9 ERF1-0311 120 13.0 15.1 17.3 19.8 22.3 25.2 28.3 31.6 35.3 39.0 1 1/8 1/2 28 68 410 130 11.6 13.6 15.8 18.0 20.5 23.2 26.0 29.1 32.6 36.1 100 19.5 23.4 27.6 32.1 36.8 42.0 47.6 53.6 60.5 67.4 040-1H2 110 17.0 20.8 24.7 28.9 33.4 38.2 43.4 49.0 55.3 61.6 NRB2-0400 120 15.0 18.6 22.2 26.1 30.3 34.7 39.5 44.7 50.5 56.3 1 1/8 1/2 68 81 550 130 13.3 16.7 20.2 23.9 27.7 31.8 36.1 40.8 46.1 51.4 100 24.0 28.2 32.8 37.8 43.3 49.0 55.2 61.9 76.5 92.9 049-1H2 110 21.6 25.6 29.9 34.6 39.7 45.1 50.9 57.2 70.8 86.1 NRA2-0500 120 19.3 23.0 27.0 31.4 36.0 41.0 46.4 52.2 64.8 79.0 1 3/8 1/2 68 81 560 130 17.4 20.7 24.4 28.4 32.6 37.2 42.2 47.4 59.0 72.1 100 24.5 28.5 32.9 37.5 42.6 48.1 54.0 60.5 67.4 74.9 050-1H2 110 21.8 25.7 29.9 34.3 39.2 44.4 50.0 56.2 62.7 69.8 2DC3-0500 (4) 120 19.3 23.0 27.0 31.2 35.8 40.7 46.0 51.8 58.0 64.7 1 3/8 1/2 68 81 620 130 NA 20.2 24.0 28.1 32.4 37.0 42.0 47.4 53.2 59.6 100 28.9 33.5 38.4 43.9 49.6 55.9 62.6 69.9 77.9 86.4 060-1H2 110 26.0 30.4 35.3 40.3 45.8 51.8 58.1 65.1 72.6 80.6 2DD3-0500 120 23.3 27.5 32.0 36.8 42.0 47.6 53.6 60.2 67.2 74.8 1 3/8 1/2 68 81 630 130 NA 24.6 28.9 33.4 38.2 43.6 49.2 55.2 61.9 69.0 100 36.9 42.6 48.8 55.5 62.5 70.1 78.3 87.1 96.8 106.6 070-1H2 110 33.7 39.3 45.2 51.5 58.1 65.4 73.1 81.5 90.6 100.5 2DL3-0750 120 30.6 35.9 41.5 47.4 53.7 60.5 67.9 75.7 84.4 93.6 1 3/8 5/8 81 141 660 130 NA 32.6 37.8 43.4 49.2 55.6 62.4 69.9 77.9 86.6 100 41.6 48.3 55.4 62.8 70.8 79.4 88.6 98.5 109.2 120.6 080-1H2 110 37.4 44.1 51.0 58.3 66.0 74.1 82.8 92.1 102.2 113.0 2DA3-0750 120 33.0 39.7 46.4 53.5 60.9 68.7 76.9 85.7 95.1 105.2 1 3/8 5/8 81 141 670 130 NA 34.9 41.6 48.5 55.6 63.0 70.8 79.1 87.8 97.3 100 53.3 60.5 68.3 76.8 86.0 95.9 106.6 118.9 131.2 144.5 090-1H2 110 49.3 56.2 63.6 71.5 80.3 89.7 99.9 110.7 123.0 135.3 3DA3A-0750 120 45.4 51.9 58.8 66.4 74.6 83.5 93.1 103.5 114.8 127.1 1 3/8 5/8 81 141 700 130 NA 47.8 54.3 61.5 69.2 77.5 86.5 96.2 106.6 117.9 100 64.6 72.9 81.8 91.6 102.2 113.8 126.1 139.4 153.8 170.2 100-1H2 110 60.1 68.0 76.6 85.8 95.8 106.6 118.9 131.2 145.6 159.9 3DB3A-1000 120 55.6 63.0 71.1 79.8 89.4 99.7 110.7 123.0 136.3 149.7 1 3/8 7/8 81 141 730 130 NA 57.9 65.6 73.8 82.7 92.4 102.5 113.8 126.1 139.4 100 84.7 95.8 107.6 121.0 135.3 150.7 167.1 185.5 205.0 226.5 150-1H2 110 79.4 90.0 101.4 113.7 127.1 141.5 156.8 174.3 192.7 212.2 3DS3A-1500 120 74.8 84.7 95.2 106.6 118.9 132.2 146.6 163.0 179.4 197.8 1 5/8 7/8 141 178 850 130 NA 80.0 89.7 100.1 111.5 124.0 137.4 151.7 167.1 184.5 100 87.5 99.7 112.8 128.1 144.5 162.0 182.5 204.0 227.6 253.2 200-1H2 110 82.8 94.1 106.6 120.3 135.3 151.7 170.2 190.7 212.2 236.8 4DA3-2000 120 77.6 88.2 99.7 112.4 126.1 141.5 158.9 177.3 197.8 220.4 1 5/8 7/8 141 178 900 130 NA 80.1 90.8 102.6 115.5 130.2 145.6 163.0 181.4 201.9 100 112.8 129.2 146.6 167.1 189.6 213.2 237.8 263.4 291.1 318.8 250-1H2 110 104.6 118.9 136.3 154.8 175.3 197.8 221.4 246.0 272.7 298.3 4DH3-2500 120 95.2 108.7 125.1 142.5 162.0 182.5 205.0 228.6 253.2 278.8 2 1/8 1 1/8 141 178 920 130 NA 98.6 112.8 130.2 147.6 168.1 188.6 211.2 234.7 258.3 100 134.3 152.7 173.2 196.8 221.4 248.1 276.8 306.5 339.3 373.1 300-1H2 110 125.1 142.5 162.0 183.5 207.1 231.7 258.3 287.0 317.8 350.6 4DJ3-3000 120 115.8 132.2 149.7 170.2 191.7 215.3 240.9 267.5 297.3 328.0 2 1/8 1 1/8 178 247 990 130 NA 121.0 137.4 155.8 175.3 197.8 221.4 247.0 274.7 303.4 100 171.2 192.7 216.3 242.9 270.6 302.4 336.2 374.1 414.1 458.2 350-1H2 110 159.9 180.4 203.0 226.5 253.2 282.9 313.7 348.5 386.4 427.4 6DH3-3500 120 148.6 168.1 188.6 211.2 235.8 262.4 292.1 323.9 358.8 396.7 2 1/8 1 1/8 178 247 1070 130 NA 155.8 175.3 195.8 218.3 244.0 270.6 300.3 332.1 367.0 100 206.0 233.7 262.4 295.2 329.0 367.0 406.9 450.0 496.1 545.3 400-1H2 110 193.7 219.4 246.0 276.8 308.5 343.4 381.3 421.3 464.3 510.5 6DJ3-4000 120 181.4 205.0 230.6 258.3 288.0 320.8 355.7 392.6 432.6 475.6 2 1/8 1 1/8 178 247 1120 130 NA 190.7 214.2 239.9 267.5 297.3 329.0 363.9 400.8 440.8 NOTE : (1) Receiver holding charge (lb.) is based on 90% full at 90 F (For SCS only) (3) For R-407C refrigerant, multiply capacity by 0.98 and POE oil compressor (2) For 50 Hz operation, multiply capacity by 0.83 must be used (4) Capacity and range apply to 3-phase units only 4

CAPACITY CAPACITY SCS/WCS (008 TO 300) LOW TEMPERATURE, R-22 Model Cond. Saturated Suction Temp. F (Capacity MBH) Line Size Receiver (lb.) Shipping Compressor Temp. -40-35 -30-25 -20-15 -10-5 0 Suction Liquid Std Opt Weight (lb.) 100 1.4 1.8 2.2 2.7 3.2 3.8 4.4 5.1 5.8 008-1L2 105 1.3 1.7 2.1 2.5 3.0 3.6 4.2 4.8 5.6 KAMB-0075 110 1.2 1.5 1.9 2.4 2.9 3.4 4.0 4.6 5.3 5/8 3/8 28 68 320 115 1.0 1.4 1.8 2.2 2.7 3.2 3.8 4.4 5.1 100 2.1 2.6 3.1 3.7 4.3 5.1 5.9 6.8 7.7 010-1L2 105 2.0 2.4 2.9 3.5 4.1 4.8 5.6 6.5 7.4 KAJB-0100 110 1.8 2.2 2.7 3.3 3.9 4.6 5.3 6.2 7.1 5/8 3/8 28 68 330 115 1.7 2.1 2.5 3.1 3.7 4.3 5.1 5.9 6.7 100 2.3 2.9 3.5 4.2 4.9 5.7 6.7 7.7 9.0 015-1L2 105 2.2 2.7 3.3 3.9 4.6 5.4 6.3 7.4 8.6 KAKB-0200 110 2.0 2.5 3.1 3.7 4.4 5.1 6.0 7.0 8.2 7/8 3/8 28 68 340 115 1.8 2.3 2.9 3.4 4.1 4.8 5.7 6.7 7.8 100 3.4 4.2 5.2 6.2 7.4 8.7 10.1 11.7 13.3 020-1L2 105 3.1 3.9 4.8 5.9 7.0 8.2 9.6 11.1 12.7 EADA-0200 110 2.9 3.7 4.5 5.5 6.6 7.8 9.1 10.6 12.2 7/8 3/8 28 68 400 115 2.7 3.4 4.2 5.2 6.2 7.3 8.6 10.0 11.6 100 4.1 4.8 5.8 7.0 8.4 10.0 11.8 13.7 15.8 025-1L2 105 3.9 4.6 5.5 6.6 8.0 9.6 11.4 13.2 15.2 EAVB-0210 110 3.7 4.3 5.1 6.3 7.6 9.1 10.9 12.6 14.6 7/8 3/8 28 68 420 115 3.3 3.9 4.8 5.9 7.2 8.6 10.3 12.0 13.8 100 5.7 7.0 8.6 10.6 12.9 15.5 18.3 21.3 24.6 030-1L2 105 5.4 6.6 8.2 10.1 12.3 14.9 17.6 20.5 23.6 LAHA-0310 105 5.4 6.6 8.2 10.1 12.3 14.9 17.6 20.5 23.6 1 1/8 1/2 28 68 460 115 4.5 5.6 7.1 9.0 11.1 13.4 16.0 18.8 21.6 100 8.0 10.1 12.2 14.6 17.2 20.3 23.8 27.9 32.5 040-1L2 105 7.3 9.3 11.5 13.7 16.3 19.3 22.7 26.5 31.0 2DF3-0300 110 6.6 8.6 10.7 12.9 15.4 18.2 21.5 25.2 29.5 1 3/8 1/2 68 81 615 115 5.8 7.8 9.9 12.0 14.5 17.2 20.3 23.9 28.1 100 9.6 11.8 14.5 17.5 20.9 24.6 28.7 33.1 37.8 050-1L2 105 8.9 11.1 13.6 16.5 19.8 23.4 27.4 31.7 36.3 2DL3-0400 110 8.2 10.3 12.7 15.6 18.8 22.2 26.0 30.2 34.7 1 3/8 1/2 68 81 625 115 7.4 9.4 11.8 14.6 17.6 21.0 24.7 28.8 33.2 100 11.2 13.9 16.9 20.4 24.3 28.6 33.3 38.4 44.0 060-1L2 105 10.4 13.0 16.0 19.3 23.1 27.3 31.8 36.8 42.2 2DA3-0600 110 9.7 12.1 14.9 18.1 21.8 25.8 30.2 35.2 40.5 1 3/8 1/2 68 81 635 115 8.9 11.2 13.9 16.9 20.4 24.3 28.6 33.4 38.6 100 14.4 17.5 21.0 24.9 29.3 34.2 39.7 45.7 52.5 070-1L2 105 13.3 16.4 19.9 23.8 28.0 32.8 38.1 44.0 50.5 3DA3A-0600 110 12.2 15.3 18.7 22.4 26.7 31.3 36.5 42.2 48.6 1 3/8 5/8 81 141 785 115 11.0 14.1 17.5 21.1 25.2 29.7 34.8 40.4 46.6 100 18.5 22.5 26.8 31.4 36.5 42.0 48.3 55.2 62.9 080-1L2 105 17.2 21.0 25.2 29.7 34.6 40.2 46.3 53.1 60.6 3DB3A-0750 110 15.8 19.6 23.6 28.1 32.9 38.3 44.3 50.8 58.2 1 3/8 5/8 81 141 715 115 14.3 18.1 22.1 26.4 31.2 36.5 42.3 48.7 55.9 100 21.3 25.9 31.3 37.1 43.7 50.9 58.7 67.1 76.1 090-1L2 105 20.0 24.4 29.5 35.3 41.7 48.7 56.4 64.7 73.5 3DF3A-0900 110 18.7 22.9 27.8 33.3 39.6 46.5 54.0 62.1 70.9 1 3/8 5/8 81 141 730 115 17.4 21.3 26.0 31.4 37.5 44.2 51.6 59.6 68.3 100 23.1 28.3 34.0 40.3 47.3 54.8 63.2 72.4 82.3 100-1L2 105 21.8 26.8 32.3 38.4 45.2 52.7 60.8 69.8 79.5 3DS3A-1000 110 20.5 25.3 30.6 36.6 43.2 50.3 58.3 67.1 76.8 1 3/8 7/8 81 141 740 115 19.2 23.7 28.9 34.6 40.9 48.0 55.8 64.4 73.9 100 32.1 39.6 47.7 56.4 65.9 76.4 87.6 100.1 113.8 150-1L2 105 29.8 37.1 45.0 53.6 62.9 73.2 84.3 96.6 109.7 4DL3-1500 110 27.5 34.6 42.3 50.6 59.9 69.8 80.8 92.8 105.6 1 5/8 7/8 141 178 920 115 25.0 31.9 39.4 47.6 56.6 66.3 77.1 88.9 101.6 100 39.0 48.0 57.1 66.7 77.0 88.5 101.4 116.1 133.3 220-1L2 105 36.8 45.7 54.7 64.1 74.1 85.4 98.0 112.3 129.2 4DT3-2200 110 34.6 43.5 52.3 61.4 71.3 82.2 94.5 108.7 125.1 2 1/8 7/8 141 178 940 115 32.2 40.9 49.6 58.5 68.2 78.8 90.8 104.6 120.4 100 47.7 59.2 71.2 83.8 97.5 112.2 128.3 146.3 166.1 270-1L2 105 44.5 56.0 67.9 80.3 93.7 108.1 124.0 141.5 160.9 6DL3-2700 110 41.1 52.6 64.3 76.6 89.7 103.9 119.4 136.6 155.8 2 1/8 1 1/8 178 247 1050 115 37.3 48.6 60.2 72.4 85.3 99.2 114.5 131.4 150.2 100 58.0 71.3 85.0 99.5 115.3 132.7 152.4 174.7 199.9 300-1L2 105 55.2 68.3 81.6 95.7 111.0 127.9 147.0 168.6 192.7 6DT3-3000 110 52.4 65.1 78.1 91.8 106.7 123.1 141.6 162.6 186.6 115 48.7 61.2 74.0 87.3 101.8 117.7 135.6 156.0 179.4 NOTE : (1) Receiver holding charge (lb.) is based on 90% full at 90 F (For SCS only) (2) For 50 Hz operation, multiply capacity by 0.83 2 1/8 1 1/8 178 247 1090 5

CAPACITY CAPACITY SCS/WCS (008 TO 400) MEDIUM TEMPERATURE, R-404A/R-507 Model Cond. Saturated Suction Temp. F (Capacity MBH) Line Size Receiver (lb.) Shipping Compressor Temp. 0 5 10 15 20 25 30 Suction Liquid Std Opt Weight (lb.) 100 6.0 6.9 7.8 8.7 9.6 10.7 NA 010-1M4 110 5.3 6.0 6.9 7.8 8.7 9.5 NA KARB-010E 120 4.6 5.3 6.0 6.9 7.7 8.5 NA 5/8 3/8 24 59 326 130 3.9 4.5 5.2 5.9 6.7 7.4 NA 100 9.9 11.2 12.5 14.0 15.7 17.7 NA 015-1M4 110 8.9 10.0 11.3 12.5 14.0 15.9 NA KAKB-021E 120 7.9 8.9 9.9 11.1 12.4 14.0 NA 7/8 3/8 24 59 330 130 6.9 7.8 8.6 9.6 10.8 12.2 NA 100 12.2 14.0 15.9 17.8 20.1 22.6 NA 020-1M4 110 10.8 12.3 13.9 15.8 17.8 20.0 NA ERCA-021E 120 9.2 10.7 12.1 13.7 15.5 17.5 NA 7/8 3/8 24 59 340 130 7.8 9.0 10.4 11.7 13.3 15.1 NA 100 17.8 20.2 22.9 25.7 28.9 32.3 NA 030-1M4 110 15.8 17.9 20.4 23.1 25.9 29.1 NA ERFA-031E 120 13.7 15.7 17.9 20.3 22.9 25.7 NA 1 1/8 1/2 24 59 410 130 11.7 13.5 15.4 17.5 19.8 22.2 NA 100 23.5 27.1 31.0 35.3 40.0 45.1 NA 040-1M4 110 20.4 23.7 27.2 31.1 35.3 39.9 NA NRB2-040E 120 17.4 20.4 23.6 27.0 30.6 34.8 NA 1 1/8 1/2 24 59 410 130 14.7 17.2 20.0 23.0 26.2 29.7 NA 100 26.9 30.6 35.0 39.7 44.8 50.4 56.5 050-1M4 110 24.0 27.5 31.3 35.5 40.1 45.1 50.5 2DC3-050E 120 21.2 24.3 27.7 31.4 35.5 39.9 44.7 1 3/8 1/2 59 70 590 130 18.5 21.1 24.1 27.4 31.0 34.9 39.1 100 32.6 37.1 42.1 47.7 53.7 60.4 67.4 060-1M4 110 29.3 33.3 37.9 42.9 48.4 54.3 60.8 2DD3-050E 120 26.0 29.6 33.6 38.1 42.9 48.3 54.0 1 3/8 1/2 59 70 622 130 22.9 25.9 29.4 33.3 37.5 42.1 47.2 100 40.6 45.9 52.0 58.5 65.7 73.6 82.1 070-1M4 110 36.7 41.5 46.9 52.9 59.3 66.4 74.1 2DL3-075E 120 32.8 37.2 42.0 47.4 53.1 59.4 66.2 1 3/8 5/8 70 122 650 130 28.9 32.8 37.1 41.7 46.8 52.4 58.3 100 48.2 54.2 60.9 68.2 76.1 84.8 94.2 080-1M4 110 43.6 49.1 55.1 61.7 68.9 76.7 85.3 2DA3-075E 120 39.0 44.0 49.3 55.2 61.6 68.6 76.2 1 3/8 5/8 70 122 660 130 34.2 38.7 43.6 48.8 54.4 60.6 67.2 100 55.8 62.9 70.8 79.5 89.1 99.4 110.7 090-1M4 110 51.1 57.6 64.6 72.3 80.7 89.9 99.8 3DA3A-075E 120 46.6 52.5 58.7 65.6 73.0 81.0 89.8 1 3/8 5/8 70 122 710 130 41.7 47.0 52.7 58.7 65.4 72.5 80.1 100 67.5 75.9 85.1 95.0 105.9 117.7 130.6 100-1M4 110 61.6 69.3 77.6 86.6 96.4 107.0 118.6 3DB3A-100E 120 55.8 62.6 70.1 78.1 86.9 96.3 106.6 1 3/8 7/8 70 122 730 130 49.6 55.9 62.5 69.6 77.3 85.7 94.7 100 92.6 104.0 116.6 130.4 145.4 162.0 179.9 150-1M4 110 84.4 94.8 106.1 118.5 132.0 146.7 162.8 3DS3A-150E 120 76.3 85.6 95.7 106.8 118.7 131.8 146.0 1 5/8 7/8 122 155 820 130 68.3 76.6 85.5 95.1 105.6 117.0 129.4 100 96.5 109.5 123.8 139.4 156.3 174.4 193.6 200-1M4 110 85.3 97.1 110.0 124.1 139.3 155.7 173.2 4DA3-200E 120 74.4 84.9 96.4 108.9 122.5 137.1 152.8 1 5/8 7/8 122 155 910 130 64.2 73.2 83.1 94.1 106.1 118.9 132.7 100 123.7 139.8 157.7 177.2 198.2 220.7 244.2 250-1M4 110 111.8 126.1 142.1 159.7 178.6 198.7 219.9 4DH3-250E 120 100.0 112.8 127.1 142.9 159.9 178.0 197.0 2 1/8 1 1/8 122 155 930 130 87.9 99.3 112.1 126.3 141.6 157.7 174.8 100 148.0 167.6 189.0 212.4 237.6 265.0 294.3 300-1M4 110 133.8 151.3 170.6 191.6 214.3 238.9 265.5 4DJ3-300E 120 119.9 135.4 152.4 171.1 191.4 213.3 237.0 2 1/8 1 1/8 155 214 990 130 105.9 119.3 134.2 150.4 168.1 187.4 208.3 100 188.8 212.5 238.5 267.0 298.3 332.3 369.5 350-1M4 110 170.4 192.1 215.9 241.9 270.2 301.1 334.9 6DH3-350E 120 151.8 171.6 193.0 216.3 241.7 269.4 299.6 2 1/8 1 1/8 155 214 1080 130 133.1 150.7 169.7 190.2 212.6 236.9 263.3 100 223.9 251.4 281.6 314.4 349.6 387.7 428.3 400-1M4 110 202.7 228.0 255.4 285.3 317.5 352.2 389.4 6DJ3-400E 120 181.9 204.7 229.4 256.4 285.4 316.7 350.2 2 1/8 1 1/8 155 214 1120 130 160.4 180.5 202.4 226.2 252.0 279.8 309.8 NOTE : (1) Receiver holding charge (lb.) is based on 90% full at 90 F (For SCS only) 6

CAPACITY CAPACITY SCS/WCS (008 TO 300) LOW TEMPERATURE, R-404A/R-507 Model Cond. Saturated Suction Temp. F (Capacity MBH) Line Size Receiver (lb.) Shipping Compressor Temp. -40-35 -30-25 -20-15 -10-5 0 Suction Liquid Std Opt Weight (lb.) 100 1.9 2.2 2.6 3.1 3.6 4.2 4.9 5.6 6.5 008-1L4 105 1.8 2.1 2.5 2.9 3.4 4.0 4.6 5.3 6.0 KAMB-007E 110 1.6 1.9 2.2 2.7 3.2 3.8 4.4 5.0 5.7 5/8 3/8 24 57 320 115 1.4 1.7 2.0 2.5 2.9 3.5 4.1 4.7 5.4 100 2.5 3.0 3.6 4.2 4.9 5.6 6.6 7.5 8.5 010-1L4 105 2.3 2.8 3.3 3.9 4.6 5.3 6.2 7.1 8.0 KAJB-010E 110 2.1 2.5 3.0 3.6 4.3 4.9 5.7 6.6 7.6 5/8 3/8 24 59 330 115 1.9 2.3 2.8 3.3 3.9 4.6 5.3 6.2 7.1 100 2.7 3.5 4.2 4.8 5.5 6.4 7.3 8.3 9.6 015-1L4 105 2.5 3.2 3.9 4.5 5.2 5.9 6.8 7.8 9.0 KAKB-011E 110 2.3 3.0 3.6 4.2 4.8 5.5 6.4 7.3 8.5 5/8 3/8 24 59 340 115 2.0 2.7 3.3 3.8 4.5 5.1 5.9 6.8 7.9 100 3.7 4.4 5.3 6.2 7.2 8.3 9.5 10.9 12.3 017-1L4 105 3.4 4.1 4.9 5.8 6.8 7.9 9.0 10.3 11.6 KALB-015E 110 3.1 3.8 4.6 5.4 6.4 7.4 8.5 9.6 11.0 7/8 3/8 24 59 380 115 2.8 3.5 4.2 5.1 5.9 6.9 8.0 9.1 10.4 100 3.9 4.8 5.8 6.9 8.1 9.4 10.9 12.5 14.5 020-1L4 105 3.5 4.4 5.4 6.5 7.6 8.8 10.3 11.8 13.6 EADB-021E 110 3.1 4.0 5.0 5.9 7.1 8.2 9.6 11.1 12.8 7/8 3/8 24 59 400 115 2.8 3.6 4.5 5.5 6.6 7.6 9.0 10.4 12.0 100 4.9 5.9 7.0 8.2 9.6 11.2 12.8 14.8 16.8 025-1L4 105 4.4 5.4 6.5 7.7 9.0 10.5 12.1 13.8 15.8 EAVB-021E 110 3.8 4.8 6.0 7.2 8.4 9.8 11.4 13.0 14.9 7/8 3/8 24 59 420 115 3.2 4.3 5.4 6.6 7.8 9.2 10.7 12.2 13.9 100 6.4 8.1 10.1 12.4 14.9 17.5 20.5 23.7 27.2 030-1L4 105 5.6 7.3 9.3 11.5 13.8 16.4 19.3 22.2 25.5 LAHB-032E 110 4.8 6.5 8.4 10.6 12.8 15.3 17.9 20.8 23.9 1 1/8 1/2 24 59 450 115 4.0 5.7 7.6 9.6 11.8 14.1 16.7 19.4 22.3 100 10.6 12.8 15.2 17.7 20.6 23.9 27.4 31.3 35.6 040-1L4 105 9.8 11.9 14.2 16.7 19.5 22.6 25.9 29.6 33.6 2DF3-030E 110 8.9 11.0 13.3 15.8 18.5 21.3 24.5 28.0 31.8 1 3/8 1/2 59 70 610 115 8.0 10.1 12.3 14.8 17.3 20.1 23.1 26.4 30.0 100 13.1 15.7 18.5 21.6 25.0 28.7 32.8 37.3 42.2 050-1L4 100 13.1 15.7 18.5 21.6 25.0 28.7 32.8 37.3 42.2 2DL3-040E 110 11.3 13.7 16.3 19.2 22.3 25.7 29.5 33.6 38.0 1 3/8 1/2 59 70 620 115 10.4 12.7 15.2 18.0 21.0 24.2 27.8 31.7 35.9 100 15.5 18.4 21.5 25.0 28.8 32.9 37.4 42.3 47.8 060-1L4 105 14.4 17.3 20.4 23.7 27.3 31.3 35.6 40.3 45.4 2DA3-060E 110 13.4 16.2 19.2 22.3 25.8 29.6 33.7 38.2 43.2 1 3/8 1/2 59 70 630 115 12.4 15.1 18.0 21.0 24.3 28.0 31.9 36.2 40.8 100 18.9 22.2 25.8 29.8 34.3 39.3 44.6 50.5 57.0 070-1L4 105 17.8 21.0 24.6 28.5 32.8 37.5 42.6 48.3 54.4 3DA3A-060E 110 16.6 19.8 23.3 27.1 31.3 35.8 40.7 46.0 51.9 1 3/8 5/8 70 122 680 115 15.2 18.4 21.8 25.5 29.6 33.9 38.7 43.8 49.4 100 22.4 26.4 30.8 35.5 40.6 46.3 52.6 59.6 67.2 080-1L4 105 21.2 25.1 29.3 33.9 38.8 44.3 50.3 56.9 64.3 3DB3A-075E 110 19.8 23.7 27.9 32.3 37.1 42.3 48.1 54.3 61.2 1 3/8 5/8 70 122 700 115 18.4 22.3 26.3 30.6 35.3 40.3 45.8 51.8 58.3 100 27.3 32.0 37.3 43.2 49.6 56.7 64.5 73.0 82.3 090-1L4 105 25.8 30.5 35.6 41.2 47.5 54.2 61.7 69.8 78.8 3DF3A-090E 110 24.3 28.9 33.9 39.4 45.3 51.8 58.9 66.7 75.2 1 3/8 5/8 70 122 710 115 22.8 27.2 32.1 37.4 43.1 49.4 56.2 63.6 71.8 100 31.2 36.6 42.5 49.1 56.2 64.0 72.4 81.4 91.2 100-1L4 105 29.4 34.7 40.5 46.8 53.7 61.1 69.2 77.9 87.3 3DS3A-100E 110 27.6 32.8 38.4 44.5 51.1 58.2 66.0 74.3 83.3 1 3/8 7/8 70 122 720 115 25.7 30.8 36.2 42.1 48.5 55.4 62.8 70.7 79.3 100 42.8 50.9 59.1 67.8 76.9 86.8 97.7 109.7 123.1 150-1L4 105 40.8 48.6 56.6 64.8 73.6 83.0 93.4 105.0 117.8 4DL3-150E 110 38.6 46.2 53.9 61.9 70.3 79.4 89.3 100.3 112.5 1 5/8 7/8 122 155 900 115 35.9 43.5 51.0 58.7 66.9 75.6 85.2 95.7 107.5 100 50.8 60.6 70.9 81.7 93.3 105.6 119.0 133.4 149.0 220-1L4 105 47.4 57.1 67.0 77.5 88.6 100.3 113.0 126.6 141.5 4DT3-220E 110 43.9 53.4 63.1 73.3 83.8 95.1 107.2 120.1 134.2 2 1/8 7/8 122 155 930 115 39.9 49.4 59.1 69.0 79.3 90.1 101.7 11.6 127.4 100 62.4 73.7 86.3 100.1 115.4 131.8 149.5 168.5 188.7 270-1L4 105 58.6 69.7 82.0 95.4 110.1 125.9 142.9 160.9 180.2 6DL3-270E 110 54.6 65.5 77.5 90.6 104.8 120.0 136.2 153.5 171.9 2 1/8 1 1/8 155 214 1040 115 50.0 60.9 72.7 85.5 99.2 114.0 129.6 146.2 163.6 100 71.0 83.8 97.7 113.0 129.7 147.9 167.9 189.7 213.5 300-1L4 105 66.5 79.0 92.6 107.2 123.3 140.7 159.8 180.6 203.2 6DT3-300E 110 61.8 74.1 87.3 101.5 117.0 133.7 151.7 171.5 192.8 2 1/8 1 1/8 155 214 1080 115 57.0 69.1 82.0 95.7 110.5 126.5 143.7 162.5 182.7 NOTE : (1) Receiver holding charge (lb.) is based on 90% full at 90 F (For SCS only) (2) For 50 Hz operation, multiply capacity by 0.83 7

ELECTRICAL DATA 8 ELECTRICAL DATA SCS/WCS (008 TO 400) HIGH AND MEDIUM TEMPERATURES Standard Unit Electric Defrost Option Model Number (1) (2) Voltage Compressor Disc. Sw. Evap. Motor Elec. Def. Disc. Sw. MCA (4) MOP (4) MCA (4) MOP (4) Model (3) Qty RLA LRA Amp. Amp. Amp. Amp. (1)-008-1H2-2 240/1/60 KAN2-0075-CAV 1 6.1 36.0 7.6 15 30 2.0 12.0 12.0 15 30 (1)-008-1H2-5 200-240/3/60 KAN1-0075-TAC 1 3.5 19.9 4.4 15 30 2.0 12.0 12.0 15 30 (1)-010-1H2-2 240/1/60 KAR2-0100-CAV 1 7.4 40.0 9.3 15 30 2.0 12.0 12.0 15 30 (1)-010-1H2-5 200-240/3/60 KAR1-0100-TAC 1 4.3 27.0 5.4 15 30 2.0 12.0 12.0 15 30 (1)-010-1M4-2 240/1/60 KARB-010E-CAV 1 7.4 40.0 9.3 15 30 2.0 12.0 12.0 15 30 (1)-010-1M4-5 200-240/3/60 KARA-010E-TAC 1 4.3 27.0 5.4 15 30 2.0 12.0 12.0 15 30 (1)-015-1H2-2 240/1/60 KAGB-0150-CAV 1 9.6 55.0 12.0 20 30 3.0 16.0 16.0 20 30 (1)-015-1H2-5 200-240/3/60 KAGA-0150-TAC 1 5.5 35.5 6.9 15 30 3.0 12.0 12.0 15 30 (1)-015-1M4-2 240/1/60 KAKB-021E-CAV 1 10.6 55.0 13.3 20 30 3.0 20.0 20.0 25 30 (1)-015-1M4-5 200-240/3/60 KAKA-020E-TAC 1 6.8 50.0 8.5 15 30 3.0 12.0 12.0 15 30 (1)-020-1H2-2 240/1/60 KAKB-0200-CAV 1 10.6 55.0 13.3 20 30 4.0 20.0 20.0 25 30 (1)-020-1H2-5 200-240/3/60 KAKA-0200-TAC 1 6.8 50.0 8.5 15 30 4.0 12.0 12.0 15 30 (1)-020-1H2-8 600/3/60 ERA1-0200-TAE 1 3.5 20.0 4.4 15 30 2.0 12.0 12.0 15 30 (1)-020-1H2-9 480/3/60 KAKA-0200-TAD 1 3.0 25.0 3.8 15 30 2.0 12.0 12.0 15 30 (1)-020-1M4-5 200-240/3/60 ERCA-021E-TAC 1 8.8 46.0 11.0 15 30 4.0 16.0 16.0 20 30 (1)-020-1M4-8 600/3/60 ERCA-020E-TAE 1 3.1 20.0 3.9 15 30 2.0 12.0 12.0 15 30 (1)-030-1H2-2 240/1/60 ERF2-0310-CAB 1 17.0 86.0 21.3 35 30 6.0 32.0 32.0 40 60 (1)-030-1H2-5 200-240/3/60 ERF1-0310-TAC 1 11.7 82.0 14.6 25 30 6.0 24.0 24.0 30 30 (1)-030-1H2-8 600/3/60 ERF1-0300-TAE 1 5.2 30.0 6.5 15 30 2.0 12.0 12.0 15 30 (1)-030-1H2-9 480/3/60 ERF1-0310-TAD 1 6.4 41.0 8.0 15 30 3.0 12.0 12.0 15 30 (1)-030-1M4-5 200-240/3/60 ERFA-031E-TAC 1 12.4 82.0 15.5 25 30 6.0 24.0 24.0 30 30 (1)-030-1M4-8 600/3/60 ERFA-031E-TAE 1 5.2 30.0 6.5 15 30 2.0 12.0 12.0 15 30 (1)-030-1M4-9 480/3/60 ERFA-031E-TAD 1 5.8 41.0 7.3 15 30 3.0 12.0 12.0 15 30 (1)-040-(2)-5 200-240/3/60 NRB2-040(3)-TFC 1 21.8 141.0 27.3 45 30 8.0 40.0 40.0 50 60 (1)-040-1H2-8 600/3/60 NRB2-0400-TFE 1 9.2 53.4 11.5 20 30 3.0 16.0 16.0 20 30 (1)-040-1H2-9 480/3/60 NRB2-0400-TFD 1 11.3 62.5 14.1 25 30 4.0 20.0 20.0 25 30 (1)-040-1M4-9 480/3/60 NRB2-040E-TFD 1 9.0 62.5 11.3 20 30 4.0 16.0 16.0 20 30 (1)-049-1H2-5 200-240/3/60 NRA2-0500-TFC 1 19.2 141.0 24.0 40 30 10.0 40.0 40.0 50 60 (1)-049-1H2-8 600/3/60 NRA2-0500-TFE 1 9.2 53.4 11.5 20 30 4.0 16.0 16.0 20 30 (1)-049-1H2-9 480/3/60 NRA2-0500-TFD 1 9.6 62.5 12.0 20 30 5.0 20.0 20.0 25 30 (1)-050-1H2-2 200-240/1/60 2DC3-0500-CFB 1 29.9 125.0 37.4 60 60 10.0 56.0 56.0 70 60 (1)-050-(2)-5 200-240/3/60 2DC3-050(3)-TFC 1 22.3 120.0 27.9 50 30 10.0 48.0 48.0 60 60 (1)-050-(2)-8 600/3/60 2DC3-050(3)-TFE 1 7.7 49.0 9.6 15 30 4.0 16.0 16.0 20 30 (1)-050-(2)-9 480/3/60 2DC3-050(3)-TFD 1 10.4 60.0 13.0 20 30 5.0 20.0 20.0 25 30 (1)-060-(2)-5 200-240/3/60 2DD3-050(3)-TFC 1 22.3 120.0 27.9 50 30 10.0 48.0 48.0 60 60 (1)-060-(2)-8 600/3/60 2DD3-050(3)-TFE 1 7.9 49.0 9.9 15 30 4.0 16.0 16.0 20 30 (1)-060-(2)-9 480/3/60 2DD3-050(3)-TFD 1 10.5 60.0 13.1 20 30 5.0 20.0 20.0 25 30 (1)-070-(2)-5 200-240/3/60 2DL3-075(3)-TFC 1 31.6 169.0 39.5 70 60 10.0 64.0 64.0 80 100 (1)-070-(2)-8 600/3/60 2DL3-075(3)-TFE 1 13.2 67.0 16.5 25 30 4.0 24.0 24.0 30 30 (1)-070-(2)-9 480/3/60 2DL3-075(3)-TFD 1 13.8 85.0 17.3 30 30 5.0 28.0 28.0 35 30 (1)-080-(2)-5 200-240/3/60 2DA3-075(3)-TFC 1 32.0 169.0 40.0 70 60 10.0 64.0 64.0 80 100 (1)-080-(2)-8 600/3/60 2DA3-075(3)-TFE 1 13.3 67.0 16.6 25 30 4.0 24.0 24.0 30 30 (1)-080-(2)-9 480/3/60 2DA3-075(3)-TFD 1 14.1 85.0 17.6 30 30 5.0 28.0 28.0 35 30 (1)-090-(2)-5 200-240/3/60 3DA3A-075(3)-TFC 1 41.0 215.0 51.3 90 60 15.0 80.0 80.0 100 100 (1)-090-(2)-8 600/3/60 3DA3A-075(3)-TFE 1 16.5 84.0 20.6 35 30 6.0 32.0 32.0 40 60 (1)-090-(2)-9 480/3/60 3DA3A-075(3)-TFD 1 20.0 106.0 25.0 45 30 8.0 40.0 40.0 50 60 (1)-100-(2)-5 200-240/3/60 3DB3A-100(3)-TFC 1 43.6 215.0 54.5 90 60 15.0 88.0 88.0 110 100 (1)-100-(2)-8 600/3/60 3DB3A-100(3)-TFE 1 16.5 84.0 20.6 35 30 6.0 32.0 32.0 40 60 (1)-100-(2)-9 480/3/60 3DB3A-100(3)-TFD 1 20.0 106.0 25.0 45 30 8.0 40.0 40.0 50 60 (1)-150-(2)-5 200-240/3/60 3DS3A-150(3)-TFC 1 59.6 275.0 74.5 125 100 20.0 120.0 120.0 150 200 (1)-150-(2)-8 600/3/60 3DS3A-150(3)-TFE 1 23.6 110.0 29.5 50 30 8.0 48.0 48.0 60 60 (1)-150-(2)-9 480/3/60 3DS3A-150(3)-TFD 1 29.0 138.0 36.3 60 60 10.0 56.0 56.0 70 60 (1)-200-(2)-5 200-240/3/60 4DA3-200(3)-TSK 1 66.0 308.0 82.5 125 100 20.0 120.0 120.0 150 200 (1)-200-(2)-8 600/3/60 4DA3-200(3)-TSE 1 24.7 135.0 30.9 50 60 8.0 48.0 48.0 60 60 (1)-200-(2)-9 480/3/60 4DA3-200(3)-TSK 1 33.0 154.0 41.3 70 60 10.0 64.0 64.0 80 100 (1)-250-(2)-5 200-240/3/60 4DH3-250(3)-TSK 1 82.2 428.0 102.8 175 200 25.0 160.0 160.0 200 200 (1)-250-(2)-8 600/3/60 4DH3-250(3)-TSE 1 34.4 172.0 43.0 70 60 10.0 64.0 64.0 80 100 (1)-250-(2)-9 480/3/60 4DH3-250(3)-TSK 1 41.1 214.0 51.4 90 60 12.0 80.0 80.0 100 100 (1)-300-(2)-5 200-240/3/60 4DJ3-300(3)-TSK 1 94.0 470.0 117.5 200 200 25.0 180.0 180.0 225 200 (1)-300-(2)-8 600/3/60 4DJ3-300(3)-TSE 1 39.3 200.0 49.1 80 60 10.0 72.0 72.0 90 100 (1)-300-(2)-9 480/3/60 4DJ3-300(3)-TSK 1 47.0 235.0 58.8 100 60 12.0 88.0 88.0 110 100 (1)-350-(2)-5 200-240/3/60 6DH3-350(3)-TSK 1 107.0 565.0 133.8 225 200 30.0 200.0 200.0 250 200 (1)-350-(2)-8 600/3/60 6DH3-350(3)-TSE 1 42.5 230.0 53.1 90 60 15.0 88.0 88.0 110 100 (1)-350-(2)-9 480/3/60 6DH3-350(3)-TSK 1 53.5 283.0 66.9 110 100 20.0 100.0 100.0 125 100 (1)-400-(2)-8 600/3/60 6DJ3-400(3)-TSE 1 53.5 245.0 66.9 110 100 15.0 100.0 100.0 125 100 (1)-400-(2)-9 480/3/60 6DJ3-400(3)-TSN 1 71.0 297.0 88.8 150 100 20.0 140.0 140.0 175 200 NOTE : (1) Model SCS, WCS and MCS from 008 to 400 (2) Use suffix 1H2 for R-22 and suffix 1M4 for R-404A and R-507 (3) Use suffix 0 for mineral oil with R-22 and suffix E for Polyol Ester oil with R-22, R-404A, R-507 and R-134a (4) MCA: Minimum Circuit Ampacity, MOP: Maximum Overcurrent Protection.

ELECTRICAL DATA ELECTRICAL DATA SCS/WCS (008 TO 300) LOW TEMPERATURE Standard Unit Electric Defrost Option Model Number (1) (2) Voltage Compressor Disc. Sw. Evap. Motor Elec. Def. Disc. Sw. MCA (4) MOP (4) MCA (4) MOP (4) Model (3) Qty RLA LRA Amp. Amp. Amp. Amp. (1)-008-1L2-2 208-240/1/60 KAMB-0075-CAV 1 5.6 36.0 7.0 15 30 2.0 12.0 12.0 15 30 (1)-008-1L2-5 208-240/3/60 KAMA-0075-TAC 1 3.2 19.9 4.0 15 30 2.0 12.0 12.0 15 30 (1)-008-1L4-2 208-240/1/60 KAMB-007E-CAV 1 5.6 36.0 7.0 15 30 2.0 12.0 12.0 15 30 (1)-008-1L4-5 208-240/3/60 KAMA-007E-TAC 1 3.2 19.9 4.0 15 30 2.0 12.0 12.0 15 30 (1)-010-1L2-2 208-240/1/60 KAJB-0100-CAV 1 6.9 40.0 8.6 15 30 2.0 12.0 12.0 15 30 (1)-010-1L2-5 208-240/3/60 KAJA-0101-TAC 1 4.5 27.0 5.6 15 30 2.0 12.0 12.0 15 30 (1)-010-1L4-2 208-240/1/60 KAJB-010E-CAV 1 6.9 40.0 8.6 15 30 2.0 12.0 12.0 15 30 (1)-010-1L4-5 208-240/3/60 KAJA-011E-TAC 1 4.6 27.0 5.8 15 30 2.0 12.0 12.0 15 30 (1)-015-1L2-2 208-240/1/60 KAKB-0200-CAV 1 10.6 55.0 13.3 20 30 3.0 20.0 20.0 25 30 (1)-015-1L2-5 208-240/3/60 KAKA-0200-TAC 1 6.8 50.0 8.5 15 30 3.0 12.0 12.0 15 30 (1)-015-1L4-2 208-240/1/60 KAKB-011E-CAV 1 7.9 40.0 9.9 15 30 3.0 16.0 16.0 20 30 (1)-017-1L4-2 208-240/1/60 KALB-015E-CAV 1 9.9 55.0 12.4 20 30 3.0 20.0 20.0 25 30 (1)-017-1L4-5 208-240/3/60 KALA-016E-TAC 1 6.6 50.0 8.3 15 30 3.0 12.0 12.0 15 30 (1)-020-1L2-2 240/1/60 EADB-0200-CAB 1 8.4 58.0 10.5 15 30 4.0 16.0 16.0 20 30 (1)-020-1L2-5 208-240/3/60 EADA-0200-TAC 1 6.8 46.0 8.5 15 30 4.0 12.0 12.0 15 30 (1)-020-1L4-2 240/1/60 EADB-021E-CAB 1 10.0 58.0 12.5 20 30 4.0 20.0 20.0 25 30 (1)-020-1L4-5 208-240/3/60 EADA-020E-TAC 1 6.8 46.0 8.5 15 30 4.0 12.0 12.0 15 30 (1)-025-1L2-2 208-240/1/60 EAVB-0210-CAV 1 14.7 102.0 18.4 30 30 4.0 28.0 28.0 35 30 (1)-025-1L2-5 208-240/3/60 EAVA-0210-TAC 1 7.4 50.0 9.3 15 30 4.0 16.0 16.0 20 30 (1)-025-1L2-9 480/3/60 EAVA-0210-TAD 1 3.9 26.6 4.9 15 30 2.0 12.0 12.0 15 30 (1)-025-1L4-2 208-240/1/60 EAVB-021E-CAV 1 14.7 102.0 18.4 30 30 4.0 28.0 28.0 35 30 (1)-025-1L4-5 208-240/3/60 EAVA-021E-TAC 1 7.4 50.0 9.3 15 30 4.0 16.0 16.0 20 30 (1)-025-1L4-8 600/3/60 EAVA-021E-TAE 1 3.1 20.0 3.9 15 30 2.0 12.0 12.0 15 30 (1)-025-1L4-9 480/3/60 EAVA-021E-TAD 1 3.9 26.6 4.9 15 30 2.0 12.0 12.0 15 30 (1)-030-1L2-2 240/1/60 LAHB-0311-CAB 1 16.6 93.0 20.8 35 30 6.0 32.0 32.0 40 60 (1)-030-1L2-5 208-240/3/60 LAHA-0310-TAC 1 10.7 82.0 13.4 20 30 6.0 20.0 20.0 30 30 (1)-030-1L2-9 480/3/60 LAHA-0310-TAD 1 5.2 41.0 6.5 15 30 3.0 12.0 12.0 15 30 (1)-030-1L4-2 240/1/60 LAHB-032E-CAB 1 16.7 105.0 20.9 35 30 6.0 32.0 32.0 40 60 (1)-030-1L4-5 208-240/3/60 LAHA-032E-TAC 1 12.8 112.0 16.0 25 30 6.0 24.0 24.0 30 30 (1)-030-1L4-8 600/3/60 LAHA-032E-TAE 1 4.1 30.0 5.1 15 30 2.0 12.0 12.0 15 30 (1)-030-1L4-9 480/3/60 LAHA-032E-TAD 1 6.0 56.0 7.5 15 30 3.0 12.0 12.0 15 30 (1)-040-(2)-2 240/1/60 2DF3-030(3)-CFB 1 25.8 125.0 32.3 50 60 8.0 48.0 48.0 60 60 (1)-040-(2)-5 208-240/3/60 2DF3-030(3)-TFC 1 16.8 102.0 21.0 35 30 8.0 36.0 36.0 45 60 (1)-040-(2)-8 600/3/60 2DF3-030(3)-TFE 1 6.7 41.0 8.4 15 30 3.0 12.0 12.0 15 30 (1)-040-(2)-9 480/3/60 2DF3-030(3)-TFD 1 8.1 52.0 10.1 15 30 4.0 16.0 16.0 20 30 (1)-050-(2)-5 208-240/3/60 2DL3-040(3)-TFC 1 26.3 161.0 32.9 50 60 10.0 48.0 48.0 60 60 (1)-050-(2)-8 600/3/60 2DL3-040(3)-TFE 1 7.7 49.0 9.6 15 30 4.0 16.0 16.0 20 30 (1)-050-(2)-9 480/3/60 2DL3-040(3)-TFD 1 10.2 60.0 12.8 20 30 5.0 20.0 20.0 25 30 (1)-060-(2)-5 208-240/3/60 2DA3-060(3)-TFC 1 28.8 161.0 36.0 60 60 10.0 56.0 56.0 70 60 (1)-060-(2)-8 600/3/60 2DA3-060(3)-TFE 1 9.1 49.0 11.4 20 30 4.0 16.0 16.0 20 30 (1)-060-(2)-9 480/3/60 2DA3-060(3)-TFD 1 10.2 60.0 12.8 20 30 5.0 20.0 20.0 25 30 (1)-070-(2)-5 208-240/3/60 3DA3A-060(3)-TFC 1 30.3 150.0 37.9 60 60 10.0 56.0 56.0 70 60 (1)-070-(2)-8 600/3/60 3DA3A-060(3)-TFE 1 10.5 62.0 13.1 20 30 4.0 20.0 20.0 25 30 (1)-070-(2)-9 480/3/60 3DA3A-060(3)-TFD 1 13.7 77.0 17.1 30 30 5.0 28.0 28.0 35 30 (1)-080-(2)-5 208-240/3/60 3DB3A-075(3)-TFC 1 31.5 161.0 39.4 70 60 15.0 64.0 64.0 80 100 (1)-080-(2)-8 600/3/60 3DB3A-075(3)-TFE 1 11.0 67.0 13.8 20 30 6.0 24.0 24.0 30 30 (1)-080-(2)-9 480/3/60 3DB3A-075(3)-TFD 1 16.1 83.0 20.1 35 30 8.0 32.0 32.0 40 60 (1)-090-(2)-5 208-240/3/60 3DF3A-090(3)-TFC 1 39.0 215.0 48.8 80 60 15.0 80.0 80.0 100 100 (1)-090-(2)-8 600/3/60 3DF3A-090(3)-TFE 1 16.5 84.0 20.6 35 30 6.0 32.0 32.0 40 60 (1)-090-(2)-9 480/3/60 3DF3A-090(3)-TFD 1 16.9 106.0 21.1 35 30 8.0 36.0 36.0 45 60 (1)-100-(2)-5 208-240/3/60 3DS3A-100(3)-TFC 1 42.0 215.0 52.5 90 60 15.0 80.0 80.0 100 100 (1)-100-(2)-8 600/3/60 3DS3A-100(3)-TFE 1 16.8 84.0 21.0 35 30 6.0 32.0 32.0 40 60 (1)-100-(2)-9 480/3/60 3DS3A-100(3)-TFD 1 18.6 106.0 23.3 40 30 8.0 36.0 36.0 45 60 (1)-150-(2)-5 208-240/3/60 4DL3-150(3)-TSK 1 52.6 278.0 65.8 110 100 20.0 100.0 100.0 125 100 (1)-150-(2)-8 600/3/60 4DL3-150(3)-TSE 1 20.9 113.0 26.1 45 30 8.0 40.0 40.0 50 60 (1)-150-(2)-9 480/3/60 4DL3-150(3)-TSK 1 26.3 139.0 32.9 50 60 10.0 48.0 48.0 60 60 (1)-220-(2)-5 208-240/3/60 4DT3-220(3)-TSK 1 66.0 374.0 82.5 125 100 20.0 120.0 120.0 150 200 (1)-220-(2)-8 600/3/60 4DT3-220(3)-TSE 1 24.2 135.0 30.3 50 60 8.0 48.0 48.0 60 60 (1)-220-(2)-9 480/3/60 4DT3-220(3)-TSK 1 33.0 187.0 41.3 70 60 10.0 64.0 64.0 80 100 (1)-270-(2)-5 200-240/3/60 6DL3-270(3)-TSK 1 80.8 450.0 101.0 175 200 25.0 160.0 160.0 200 200 (1)-270-(2)-8 600/3/60 6DL3-270(3)-TSE 1 32.5 172.0 40.6 70 60 10.0 64.0 64.0 80 100 (1)-270-(2)-9 480/3/60 6DL3-270(3)-TSK 1 40.4 225.0 50.5 90 60 12.0 80.0 80.0 100 100 (1)-300-(2)-5 200-240/3/60 6DT3-300(3)-TSK 1 95.6 470.0 119.5 200 200 25.0 180.0 180.0 225 200 (1)-300-(2)-8 600/3/60 6DT3-300(3)-TSE 1 39.6 200.0 49.5 80 60 10.0 72.0 72.0 90 100 (1)-300-(2)-9 480/3/60 6DT3-300(3)-TSK 1 47.8 235.0 59.8 100 60 12.0 88.0 88.0 110 100 NOTE : (1) Model SCS, WCS and MCS from 008 to 300 (2) Use suffix 1L2 for R-22 and suffix 1L4 for R-404A and R-507 (3) Use suffix 0 for mineral oil with R-22 and suffix E for Polyol Ester oil with R-22, R-404A, R-507 and R-134a (4) MCA: Minimum Circuit Ampacity, MOP: Maximum Overcurrent Protection 9

DRAWINGS MODEL SCS REMOTE INDOOR CONDENSING UNIT 44 46 11 3/4 13 3/4 1/2"ø 4 MTG HOLES B A 22 1/4 24 1/4 22 1/4 24 1/4 MODEL 270 TO 400 WITH OPT. RECEIVER MODEL SCS REMOTE INDOOR CONDENSING UNIT (STACKABLE) Std Receiver Opt. Receiver Model No. A B A B 008 to 060 49 1/2 47 1/4 49 1/2 47 1/4 070 to 100 55 1/2 53 1/4 55 1/2 53 1/4 150 to 250 55 1/2 53 1/4 73 1/2 71 1/4 270 to 400 73 1/2 71 1/4 73 1/2 71 1/4 88 11 3/4 B A 22 1/4 24 1/2 10

DRAWINGS MODEL WCS WATER-COOLED CONDENSING UNIT B Model No. A B C D 008 to 030 27 35 37 38 3/4 040 to 080 34 43 37 46 3/4 090 to 400 40 66 43 69 3/4 1/2"ø 4 MTG HOLES C 7/8 7/8 1 1/2 1 1/2 D A RECEIVER DATA Dimensions Mounting Refrigerant Charge (lb.) O.D. X Length Position R-22 R-404A 6" X 30" H,V 28 24 8.625" X 36" H 68 59 8.625" X 42" H 81 70 10.75" X 48" H 141 122 10.75" X 60" H 178 154 12.75" X 60" H 247 214 Refrigerant charges are based on 90% full at 90 F For R-134a, multiply R-22 by 1.015 For R-507, multiply R-404A by 0.88 For R-407C, multiply R-22 by 1.056 11

SPECIFICATIONS CASINGS: Remote condenser and water-cooled condensing unit bases and electrical boxes are heavy-gauge galvanized steel (G90) with plated or stainless steel hardware for corrosion-free assembly. WIRING: Compressors and controls are wired using water and oil resistant wire, Type TEW 105 C and protected by plastic or metallic conduit secured with certified connectors. ELECTRICAL BOXES are located on the front of the unit for easy access and service. They are manufactured of heavy-gauge galvanized steel and assembled with plated or stainless steel hardware for corrosion protection. CONTROL PANELS are complete with terminal blocks, control transformer, control circuit fuses, compressor contactors, fan interlock, fix high and adjustable low pressure control, oil failure switch (for compressors with positive pressure oil pump), and a pump-down switch. The wires are numbered and color-coded, conveniently routed in wiring ducts. All terminal blocks are identified to match the wiring diagram. COMPRESSORS are air or suction cooled, refrigeration duty, accessible semi-hermetic. They are supplied with suction and discharge valves, suction strainer, oil filter, oil pump on model 3HP and larger, solid state or line break thermal protection, crankcase heater, mineral oil for HCFC refrigerant and Polyol Ester oil with HFC refrigerant. RECEIVERS (6" dia. and smaller) are UL/CSA certified and are supplied with a fusible plug. Receivers (6 5/8" dia. and larger) are CRN or ASME "U" stamped and are supplied with relief valves. All receivers have inlet and outlet back-seated Rotalock valves. REFRIGERATION FLOODING VALVES are offered as an option. They are either fixed or adjustable pressures and are factory installed (SCS). CONDENSER WATER VALVES are offered as an option. They are pressure actuated and are either 2-way or 3-way (WCS). REFRIGERATION COPPER TUBES are ASTM certified and factory bent using a programmable CNC tube bender. They are manufactured with the minimum number of fittings and brazed joints to reduce the risk of leaks. FACTORY TESTED: All RefPlus units are electrically tested. A Dielectric Voltage Withstand Strength Test is done on all units. The compressors are energized, and the operating sequence and all controls on each unit are factory tested. Refrigeration piping is leak tested and the system is pressurized and sealed with -40 F/-40 C dew point nitrogen. RefPlus Inc. reserves the right to make any changes in the design or specifications of any product at any time without notice. Copyright 2004 by RefPlus Inc. SCS/WCS-07-04-R0-2K Printed in Canada. 12 USA & CANADA 1.888.816.2665 1385 De Coulomb, Boucherville, Quebec Canada J4B 7L8 Tel.: (450) 641-2665 Fax: (450) 641-4554 www.refplus.com