ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # #4 0 0 0 #2 Nomal / 2 /4 / 5 2 /4 55 2 /4 55 2 /2 64 2 /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) 0.7 5.0.000 6.0.270 9.0.5 06.0 0 2.0 0 2.0.0.0 4.9.0 4.9.0 7.070 6.0 9.6 60.0 ed ar - Grade /0 * M. Ultimate () 79 5.4 0 444. 27 564.9 6 694.0 2 00.9 2. 5. 400 779.4 4.0 6.2 49 24.0 5.6 9 707 42.0 9 4274.0 M. Yield () 59...6 95. 42.9 7 5.5 6.7 0.4 0.0 00.7 00 4.5 0.0 42.4 67.0 92. 747. 50 6.0 7 06.0 Nomal /ft (kg/m) 2.70 4.0.40 5. 4.0 6.4 5.0 7.9 7..4 7..4..2..2 6.69 24. 6.69 24. 24. 5.9.70 4.7 pprox. Major. 2.5.0.0. 5.0.500.. 47.6. 47.6 2.4 62.0 2.4 62.0 2.0 70.0 2.0 70.0.0 2.6.0 95. Orientation old rolled threaded bars conform to the physical and chemical requirements of STM 6 Grade ksi Standard Specification for eformed arbon Steel ars for oncrete Reforcement * ontact your local Skyle Steel representative for formation on additional steel grades. pprox. Major Max. ength ft (m) ed ar - Grade 0 Nomal /4 / 2 /4 2 /2 M. Net rea Thru s 2 ( 2 ) 0.50 549.0 07.50 9 2.0 677 5. 50 7.0 54 M. Ultimate () 2 567 4 27 54 75 0 69 77 7 59 4702 M. Yield () 2 4 0 667 4 0 42 40 6 26 47 6 Nomal /ft (kg/m). 4.6 4.5 6.7 5.7.5 9..6.2 27.2 24.0 5.7 pprox. Major / 2.6 /2. 5/ 4. 2 50. 2 7/6 62.0 2 69.9 /4 2.6 ch to / ch diameter, STM 7; ch to ch diameter bar manufactured accordance with STM 7 physical and chemical requirements. Grade 0 ksi steel must not be subjected to localized heatg such as weldg, cuttg torch, or hot grdg. Please note: s we contuously improve the design of our products, product details are subject to change. ontact your sales representative for formation on hot dip galvanized and epoxy coated bars. Orientation Max. ength ft (m) Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories old Rolled ed ar and ccessories ed ar onnectors Full oad Hex Nuts and Jam Nuts Full oad Hex Nut Jam Nut Grade ar Grade ar ar ar Full Jam # # #4 #2.6 4.. 47.6 54.0 0.2 2. 7.0 00.9.6 4.0.6 9.7 4. 5.000 27.0 9.7 2.4 7. 0.0 9. 2. 9.500 24..0 24.0 04..55 0.70 2.9.0.47. 4.02.2 9.6 4..9 6. 9.6 9.0.0 4.07..96 # # #4 * ** #2**.6 4..0 50. 0.2 2.0 69.9 00 9.0.6 4.0.6 9.7 50. 50. 2.7 55.5 6.0 2.6 00 9.0 4. 4. 2.4 0.500 2.7 0.56 4. 0.6.9 0.6 7.5 0.9 2..000.4. 2.6.500..56 9.7 0. 0.7 0.9 0.40. 0..96 0.9.6. 4.7 2.2 9. 4. 2.9 5.9 2..4 0. 0.09 0. 0. 0. 0.7 0.54 0.24. 0.50. 0.2 2.. 4..96 6.02 2.7 *Round collar nut available **Round collar nut with flats Grade 0 ar Grade 0 ar Nomal Nomal Full Jam /4 / 2 /4 2 /2.0 54.0 2...000.2.6 4.0.0 5.000 27.0 4.0.0 5.0.4 5.0..500 2.9 9.000.6.000 4.0 0.0.70 0.77..4 4..9 9.9 4.5 2. 9.7 2.96.7 4.24.7 /4 / 2 /4 2 /2 *.0 0.2 6.000.2.6.6 5.000 27.0 50. 6 2.0 69.9 00.9 4.0 7.95 4.0.7 2.4 0.500 2.7 0.6.9 0.0 9..0..500..0 50. 0.94 2.07 0.94 2.7. 4. 2.9.6 5.0.2 4.9.62 9.5 0. 0.52 0.24 0. 0.4.70 0.77 4.09.6.99. 5. 2. *Round collar nut with flats with outside diameter of 5" (27). Please note: s we contuously improve the design of our products, product details are subject to change. ontact your sales representative for formation on hot dip galvanized and epoxy coated hardware (available upon request). Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories old Rolled ed ar and ccessories Hardened Washers Round eveled Washers EVE Grade ar Grade ar ar ar evel degrees # # #4 #2 0.0 600 2.0 69.50.000.0.0 95.0 4.00 9.700 2.400 7.000 77.00. 0.. 4.9.5.7.6 4.2 5.9 2.6 67.4.7 0..6 92.0 4. 4.7 0..4 0..4 0..4 0..4 0.7 4.52 0. 9.5 0. 9.5 0. 0.05 0.0 0.06 0. 0. 0.09 0.0 0.7 0.7 0..0 0.49.9 0.7 2.60.. 2.6 66.6 # 2. 69.5 # 2. 69.5 #4. 4. 6.4 5.00 27.00.00 #2.00. 2.5...6 4.40.6 4.40 2. 54. 2.6 66.0.00. 0.. 0..6 0.9 2.62 0.97 24.64 0.97 24.64.29.77. 29.97..27.. 0.7 4. 0.7 9.40.92.92 0.4 2.4 9.4 0.2 0.05 0.69 0. 0.66 0.0 0.66 0.0.94 0. 2..2..4 2.5 5.7 6.54 7.50 Grade 0 ar Grade 0 ar Nomal Nomal evel degrees /4 / 2 /4 2 /2 600 2.0 69.50.0 2.550.0 4.00 9.700 2.400. 4.9.5.7.770 44.95 2.407 6. 2.6 67.4.7 0..6 92.0 0..4 0..4 0.7 4.52 0. 9.5 0.0 0.06 0. 0.00 0. 0.550 0. 0.7 0..0 0.49.9 0.7 /4 / 2 /4 2 /2 64 2.6 66.6 2. 69.5.09 7.49. 4. 6.4 5.00 27.00.00...6 4.40. 2. 54. 2.6 66.0.00. 0. 0.9 2.62 0.97 24.64.06.92.29.77. 29.97..27. 0.7 9.40.92.92 0.69 0. 0.66 0.0 0.9 0.42.94 0. 2..2..4 2.5 5.7 Please note: s we contuously improve the design of our products, product details are subject to change. ontact your local Skyle Steel representative for formation on additional steel grades. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories old Rolled ed ar and ccessories earg Plates HPE Plastic Nut aps* SETION earg plate dimensions reflect typical sizes. ctual design criteria should be used for specific plate sizg. SETION SETION SETION Grade ar Plastic Nut aps for Grade ars ar # # #4 #2 2 04.0 2 04.0 9.05 9.05.40.40 /2. 2 50.0 2 /2 60 2 /2 60 2 69.5.40 6.0.5 6.06 7.7.04 27.6 2.64 4.7. 54.2 24.59 67.06 0.42. 29.69 4. 47.29 ar # #4 #2 Nomal / * O rg seal base of cap..9 6.5. nchor Nuts.2 4..0 Plastic Nut aps for Grade 0 ars.9 6.5..2 4..0 6. 7.5. 2.4 6. 7.5. 2.4 Grade 0 ar N Nomal Grade 0 nchor Nuts /4 / 2 /4 2 /2 6 2.4 7 77..2 9.6 4.0 4.0 2 04. 6 2.4 7 77..2 9.6 4.0 4.0 2 04. /4. /2. 2 /2 6 2 /2 6 2 69.9 2. 5.79.4 9.. 4.4 40..2 70.9.6 70.9.6 2. 50.94 /4 / 2 /4.0 54.0 2...000.2 4.0.0 2. 59.9. 79.5. 5.9.6 9.7 N 2. 62.2. 0.0.9 4.2 6.7 5.6 42.2 kgs.44 0..0.7 4.05.4 7.05..24 9. onsult your sales representative for availability of additional threads and grades. Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories old Rolled ed ar and ccessories Forged Eye orrosion Protection ed Portion E ed Portion F ar E F #4 #2 6. 5 6. 5 7. 0 7. 0 9.2 2.5 6 2.5 6.0.0 2.4 2.4.0.0 9.9 505 9.9 505.5 5.5 5.2 5. 7. 7 9. 24 9. 24 2. 2.0 50 2.0 50 2.5 6 2.5 6.0 s on forged eye will be metric. onversion couplers available (transition) for all Skyle Steel thread forms. ontact your Skyle Steel sales representative for assistance with connection details. ll threaded bars can be supplied with a protective smooth-walled PV tube. While the standard PV tube is 0.05 ch thick, other options are available upon request. The followg additional corrosion protection options are available for all threaded bars: Sgle orrosion Protection (SP) ouble orrosion Protection (P) Transitional oupler for Forged Eye X Metric Form Y Skyle Steel Form Encapsulatg: Grease or Grout Epoxy oatg Galvanizg Patg Platg Tapg ar M56 #4 0. 9. 24.92 X.6 Y 4. 6.0 lb.4.4 Oversized accessories are provided to accoodate galvanized and coated bars. Please contact your Skyle Steel Geostructural Solutions Representative for recoendations on the system that will best suit your requirements. M56 0. 9. 24.92.6 4. 6.0.6 7. M72 4.. 2.0 04.0 5..5 5..5 9.2 7. M72 4.. 2.0 04.0 5..5 5..5 4.9. M5 #2 5.50 9.70. 7.2 6.00 2.4 6.00 2.4 4.5.0 Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories Tie ars without rticulation Normal End s Upset Forged s Shaft Tensile Stress rea Yield apacity Ultimate apacity Gross rea Shaft Yield apacity Ultimate apacity Recoended esign apacity T g s Th y Th u g Sh y Sh u S* RF* 2 2 2 2. 5 2.4 6 7.67 4,94 556 2,474 74,6 4.,7 50,559 2,0 2 9,4 2.6 6.67 5,59 62 2,795 0,6 5.6,6 40,6 59 2,97 244,07,7.7 95 2. 70 9.72 6,27 705,7 9 4,40 5.97,4 4,924 2,540 9,2 4,2.9 0 2.95.4 6,995,497,0 4,66 6.5 4,4 497 2,9 5 2,96 297, 472 2,09 4. 5. 0 2.02 7,5 72,7, 5,9 7.79 5,027 5 2,5 7,,505 57 2, 4..5 5.,556 962 4,27,9 5,647.0 5,6 6 2,7 42,7,694 6 2,695 4.5 4 4.56 9,95,056 4,697,94 6, 9.6 6,2 7, 944 4,99 4, 669 2,9 4.7 4.92,274,5 5,7,524 6,7 9.6 6,2 7, 944 4,99 42,5 679,0 4.9.74 95 7.5,9, 5,596,66 7,.99 7,0 797,544,052 4,67 477 2, 7,7 5. 0.94 0. 2,49,6 6,074,0,0 2.7 7,54,927, 5,4 529 2,5 9,7 5. 5 4. 5.7,,47 6,,950,6.42,9 97 4,0, 5,7 5 2,59 9 4, 5.5 40 4. 2.9 4,,594 7,0 2,4 9,59 4.7 9,50,06 4,2,4 6,272 6 2,0,0 4,492 5.7 4. 2.,6,7 7,62 2,4,069 4.7 9,50,06 4,2,4 6,272 640 2,,0 4,54 5.9 0 4.5.7 6,70,40,5 2,429,04 6.,7,6 5,9,54 6,55 699,,9 4,94 6. 5 4.72 27.6 7,524,970,2 2,0,566 7.5,,27 5,5,67 7,4,, 5,72 6. 4.92 29.0, 2,4 9,5 2,777 2,5 9.02 2,272,79 6,,2,099,674, 5,29 6.5 5.2 0 0.92 9,94 2,242 9,974 2,9,66.,27,492 6,67,969,7,950,47 6,05 The recoended design capacities are based on IS/S and SHTO/RF design methodologies for steel structures and retag walls. n additional reduction factors from EN99-5 are applied to the tie-rods based on their ability to articulate. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories Tie ars with rticulation Forged Eye Forged Spherical End ed and Spherical Nut Shaft Tensile Stress rea Yield apacity Ultimate apacity Gross rea Shaft Yield apacity Ultimate apacity Recoended esign apacity T g s Th y Th u g Sh y Sh u S* RF* 2 2 2 2. 5 2.95 7.67 4,94 556 2,474 74,6 6.5 4,4 497 2,9 5 2,96 297, 472 2,09. 0.67 5,59 62 2,795 0,6 7.79 5,027 5 2,5 7,,505 57 2,.7 95.5 5 9.72 6,27 705,7 9 4,40.0 5,6 6 2,7 42,7 2,699 6 2,695.9 0 4.4 6,995,497,0 4,66 9.6 6,2 7, 944 4,99 42,5 679,0 4. 5.74 95 2.02 7,5 72,7, 5,9.99 7,0 797,544,052 4,67 477 2, 7,7 4..94 0.,556 962 4,27,9 5,647 2.7 7,54,927, 5,4 529 2,5 9,7 4.5 4. 5 4.56 9,95,056 4,697,94 6,.42,9 97 4,0, 5,7 5 2,59 9 4, 4.7 4..92,274,5 5,7,524 6,7 4.7 9,50,06 4,2,4 6,272 640 2,,0 4,54 4.9 4.5 7.5,9, 5,596,66 7, 6.,7,6 5,9,54 6,55 699,,9 4,94 5. 0 4.72. 2,49,6 6,074,0,0 7.5,,27 5,5,67 7,4,, 5,72 5. 5 4.92.7,,47 6,,950,6 9.02 2,272,79 6,,2,099,674, 5,29 5.5 40 5.2 0 2.9 4,,594 7,0 2,4 9,59.,27,492 6,67,969,7 9,974,47 6,05 5.7 5. 5 2.,6,7 7,62 2,4,069.9 4,4,9 7,7 2,24 9,447 96 4,,52 6,799 5.9 0 5.5 40.7 6,70,40,5 2,429,04 2.6,94,70 7,697 2,24,,0 4,9,644 7, 6. 5 5.7 27.6 7,524,970,2 2,0,566. 6,5,56,6 2,0,99, 4,944, 7,44 6. 5.9 0 29.0, 2,4 9,5 2,777 2,5 27.9 7,67,96, 2,6,66,9 5,29,7,94 6.5 6. 5 0.92 9,94 2,242 9,974 2,9,66 29.,69 2,2 9,45 2,00 2,4,270 5,649 2,0,96 The recoended design capacities are based on IS/S and SHTO/RF design methodologies for steel structures and retag walls. n additional reduction factors from EN99-5 are applied to the tie-rods based on their ability to articulate. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories Hot Rolled ed ar and ccessories pprox. Major Hot Rolled ed ar Grade /0 STM 6 ar Grade Nomal M. Net rea Thru s 2 ( 2 ) M. Ultimate () M. Yield () Nomal /ft (kg/m) pprox. Major Orientation Max. ength ft (m) #6 0.44 2 44 96 47.5 2.24 0.6 2. #7 7/ 0. 7.00 7 0 2.04.04 0.99. 0.79 5.00 79 5 59. 4 2.67.9.2 2.4 -/ 2.00 6.00 0 449.4 5.06. # -/4.27 9.00 27 5 95. 42 4. 6.4.4. # -/ 5.56 06.00 6 694 7 5 5. 7.9.6 40.9 #4 0 - - 2.00 2.00 2 0 9 2 6. 2 0 7..9 7..9.6 47.2.6 47.2 Hot rolled threaded bars conform (Excludg the requirement of: legibly rolled surface markgs. ) to the requirements of STM 6 Grade ksi (5 Mpa) Standard Specification for eformed arbon Steel ars for oncrete Reforcement ontact your sales representative for formation on hot dip galvanized and epoxy coated bars. Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com
ed ar and ccessories Hot Rolled ed ar and ccessories ouplers Hex Nuts (Full oad and Jam Nuts) Hex Nut Jam Nut Grade STM 6, Grade STM 6, ar Nomal ar Nomal Full Jam #6 #7 # # #4 7/ -/ 2 -/4 -/ 5 -...50..6 4.27. 47.62 2.00 50.0. 2. 7.. 79.7. 95.. 5.00 27.00 5..05 6.40 62.56 7.5 92.5 0.62 0.2 0.9 0.42.7 0.62 2..05 2.77..79.72 5.49 2.49 #6 #7 # # #4 7/ -/ 2 -/4 -/ 5 -. 2.. 4.92.50.. 2.00 50.0. 2.50 60....4.74. 2.50 60 2. 69.5. 9.44 0.7. 0.7. 0.7. 0.7..00.40.00.40.00.40 0. 0.2 0. 0.56 0. 0.97.4 0..52 0.69.02.7 0.6 0.2 0. 0. 0.2 0.7 0.7 0.56 0. 0.5 0.24 0.2 0.7 Hardened Washers eveled Washers Grade STM F 4 Grade F 4, 5 0-55-06 ar Nomal ar Nomal evel degrees #6 #7 # # #4 7/ -/ 2 -/4 -/ 5 -. 2.00 50.0. 2.50 60 2. 69.5.00.. 2.55 0.9 2..06 27.00. 0.. 4.92.5.9.6 4.27.77 44.96.............7 4.52 0.0 0.09 0.04 0. 0.05 0. 0.06 0.6 0.9 0.09 0.0 0.4 #6 #7 # # #4 7/ -/ 2 -/4 -/ 5 -... 2.6 66.0 2. 69.5.09 7.49.6.95 24..4 2.96.4 2.96...6 4.40. 2. 54..7 9..7 9..7 9..9 2.62.97 24.64.06.92.29.77.....2.2.2.2.2. 0..7 0.7.7 0.7.64 0.29.66 0.0.9 0..94 0. Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: -66--95 engeerg@skylesteel.com www.skylesteel.com