TOE-MN / MA / MI Series Heat transfer pumps for heat transfer oils up to 350 C with magnetic coupling volute casing PN 16 bearing brackets 360 and 470
2 Pumps for heat transfer technology Main applications Tempering in plastics and die cast industry Baking ovens, large frying units as well as in the production of edible oils and dry masses for the food and feedstuff industries Usage These pumps are designed for circulating organic or synthetic heat transfer oils in heat transfer plants in acc. with DIN 4754. Suitable fo media to be pumped with little non-abrasive contaminations Heating calenders and melting pots in the leather and rubber industry Spheroidal graphite cast iron version Stainless steel version Heating stirring and mixing vessels in the production of paints and varnishes Heating tank storage facilities on stationary and FPSE platforms as well as in tankers Media Heat transfer oil / thermal oil Heat transfer oil / thermal oil T min - 40 C - 100 C T max + 350 C + 250 C Heating press lines in the wood and pulp industry Flat glass production Solar power stations and ORC processes Casing Spheroidal graphite cast iron EN-GJS-400-15 (GGG-40) Nominal pressure PN 16 Stainless steel 1.4581 H max ( min -1 ) 100 m 60 m Q max ( min -1 ) 550 m³/h 170 m³/h ATEX II 2G c b TX Denomination Type code Example TOE- M A- 32-160 /150 Denomination of series Magnetic coupling N = Version with bearing bracket, volute casing ax/top A = Close-coupled version with bracket, volute casing ax/top I = Close-coupled version with bracket, inline casing Nominal width of outlet nozzle DN Nominal impeller diameter in mm Actual impeller diameter in mm Your contacts at Speck Pumpen Speck Pumpen Systemtechnik GmbH Regensburger Ring 6-8 91154 Roth Tel: +49 9171 809-0 Fax: +49 9171 809-10 info@speck.de International representatives page 51
3 TOE-MN / MA / MI Series TOE-MN TOE-MA TOE-MI H Example: Casing with feet Example: Casing with centreline mounting Features Bearing bracket / process version Dismantling of the bearing bracket possible without moving the motor Alignment / checking of the coupling required before start-up Pump dimensions in acc. with EN 733 Bracket version No alignment of coupling before start-up necessary Space for disassembling the cartridge insert required Pump dimensions in acc. with EN 733 Bracket version with inline casing No alignment of coupling before start-up necessary Space for disassembling the cartridge insert required Hydraulics and casing Identical hydraulics for TOE-MN and TOE-MA Characteristic curves pages 10 and 11 Identical volute casing for each frame size Large pumps with centreline mounting and double volute Description page 5 Characteristic curves pages 12 and 13 Inline casings with two dimensions H available Description Material versions and design pages 6 and 7 Pump dimensions Pages 14 and 15 Pages 14 and 15 Page 16 Base plates Dimensions included in aggregate dimensions Allocation page 31 Base plates optionally Allocation page 45 Dimensions page 46 Bearing bracket 360 Bearing bracket 470 Aggregate dimensions Page Page Page 32-160 18 32 32-200 19 33 32-250 19 33 40-160 20 34 47 40-200 21 35 48 40-250 21 35 50-160 22 36 50-200 23 37 49 50-250 23 37 65-160 24 38 65-200 25 39 49 80-160 25 39 65-250 26 40 80-200 27 41 80-250 27 41 100-160 28 42 100-200 29 43 100-250 29 43 125-200 30 44 Interchangability of parts Within all series including the versions with mechanical seal ( see catalogue TOE GN/GA/GI series) a high degree of interchangeability is given. This means minimum spare parts stock and full flexibility, as replacing pumps and components or retrofitting to a different design is very easy. Table of interchangeable pump parts page 17
4 High operational safety, optimal design and service-friendly Robust design Torsion-resistant casing cover and ball bearings with lifetime lubrication Wearing-resistant SiC sleeve bearing Solid, hydrodynamically lubricated sleeve bearings made from SiC as tried-and-tested slide material - extremely wear-resistant and good resistance in corrosive media. Impellers with back vanes The back vanes of the impellers significantly reduce the axial thrust and therefore remove strain from the axial bearings considerably. They also keep dirt particles away from the sleeve bearings. Clever temperature management Optimised cooling of ball bearings and magnetic coupling A fan blade on the coupling is also used for cooling in the TOE-MN series. Here, the generated air flow, in combination with coupling protection, ventilation slots and cooling zone, reduces the temperature on the magnetic coupling and ball bearings extremely effectively. On close-coupled pumps of the TOE-MA and TOE-MI series, the motor fan also cools the bearing shield and therefore also the ball bearings inside it. Also suitable for critical applications Pumps with magnetic couplings 100% free of leakage and lower maintenance requirements than pumps with mechanical seals. Start-up safety device Two start-up safety devices on the inner and outer rotor avoid the destruction of the separating can if a sleeve or rolling bearing fails and they ensure that the pump remains hermetically sealed. ATEX All magnetically-coupled pumps are ATEX certified. Optimal design Energy efficiency High energy efficiency secures a lasting competitive edge. Speck Pumpen offers the important criteria for energy-optimised design. Seamless range of sizes, highly efficient impellers, switching of impellers for the best design at the operating point and, naturally, motors in accordance with IE2. Optimal sizes of magnetic couplings Magnetic couplings in staged sizes guarantee optimal design at the operating point with minimal viscosity and eddy current losses. Maintenance-friendly and flexible Simple installation All series are extremely maintenance-friendly thanks to easy-to-remove bearing brackets. You can replace the sleeve bearing cartridge easily as a complete spare part. It is quick and ensures correct installation every time. Minimum spare parts stock The high level of interchangeability of identical parts guarantees minimal spare parts stock requirements and an extremely high level of flexiblity. Retrofitting to a different series is also no problem at all - the volute casing can even be left in the system. Safe The separating can remains hermetically sealed at bearing failures thanks to start-up safety devices. Robust and service-friendly Solid sleeve bearing cartridge with SiC - can be replaced as a complete spare part Temperature management Several ventilation slots Cooling zone Fan blades (TOE-MN only) Optimal design Magnetic couplings in staged sizes for optimal design with minimal viscosity and eddy current losses Figure: TOE-MN, bearing bracket 470, casing with centreline mounting
5 Longer lifetime There are effects, which have little or no relevant impact on smaller designs, but lead to increased wear in larger pumps. Speck Pumpen offers larger pumps with special designs to guarantee a longer lifetime: Casing with centreline mounting and double volute. Centreline mounting relieves strain from the bearings and coupling A double volute remove strain from the sleeve bearings Radial forces are applied directly on the sleeve bearings. The forces increase with higher impeller diameters and higher speeds. This is why the sleeve bearings on larger pumps with single volute casings wear faster. Casings with feet: The larger the pump, the more strain placed on the bearings and magnet coupling by heat expansion. Casings with feet can only expand upwards in high temperatures, which causes the pump to tilt and bend. This has an impact on the magnetic coupling and the shaft coupling in particular. As the heat expansion increases with larger casing sizes, the shaft couplings and, eventually the safety start-up devices, wear faster on larger pumps. The centreline mounting eliminates the impact of the heat expansion completely. Speck Pumpen is the only manufacturer to use a centreline mounting for heat transfer pumps volute casings (PN 16). It eliminates the impact of vertical expansion completely. The shafts are always aligned at optimal height, even in hot operation. The shaft coupling achieves a significantly higher lifetime and intact start-up safety devices still work if bearing failures occur. Speck Pumpen therefore uses casings with double volute for larger pumps, which significantly reduce the radial forces. The strain on the radial and axial bearings is considerably reduced, helping them achieve a much longer lifetime. Double volute Centreline mounting TOE-MN / MA s and casing designs 32-160 40-160 50-160 65-160 80-160 100-160 32-200 40-200 50-200 65-200 80-200 100-200 125-200 32-250 40-250 50-250 65-250 80-250 2015 100-250 Bearing bracket 360 Bearing bracket 470 All casings with dimensions in accordance with EN 733 Casing with double volute Casing with centreline mounting 2015 As of 2015
6 Material designs Bearing bracket 360 with Ø 250 mm impeller 10 14 TOE-MN 2 1 3 4 5 6 7 8 9 11 12 13 10.1 TOE-MA Spheroidal graphite cast iron version Stainless steel version 2 1 3 4 5 6 7 8 9 11 10.1 Media Heat transfer oil / thermal oil Heat transfer oil / thermal oil T min - 40 C - 100 C T max + 350 C + 250 C Nominal pressure PN 16 ATEX II 2G c b TX TOE-MI Series All series TOE-MN, MA series s All sizes 32-160 32-200 40-200 50-200 65-200 2 1 3 4 5 6 7 8 9 11 H max ( min -1 ) 100 m 60 m Q max ( min -1 ) 550 m³/h 170 m³/h No. Designation Spheroidal graphite cast iron version Stainless steel version 1 Impeller EN-GJL-250 1.4581 2 Casing EN-GJS-400-15 1.4581 3 Casing cover EN-GJS-400-15 1.4581 4 Shaft 1.4122 1.4571 5 Sleeve bearing SiC SiC 6 Inner magnet Sm 2Co 17 Sm 2Co 17 7 Outer magnet Sm 2Co 17 Sm 2Co 17 8 Separating can 2.4610 2.4610 No. Designation Spheroidal graphite cast iron version Stainless steel version 9 Bracket EN-GJS-400-15 EN-GJS-400-15 10/.1 Drive shaft / motor shaft 1.4122 1.4122 11 Coupling insert EN-GJL-250 EN-GJL-250 12 Bearing casing EN-GJL-250 EN-GJL-250 13 Rolling bearing High-quality brand High-quality brand 14 Counter flange EN-GJS-400-15 EN-GJS-400-15 EN-GJL-250 = GG-25, EN-GJS-400-15 = GGG-40
7 Design Magnetic couplings The magnetic coupling consist of inner magnetic rotor, separating can and outer magnetic rotor. The large numer of staged sizes and a modern design software guarantee the best design at the operating point. The transmissible torques of the magnetic couplings range between 10 and 500 Nm. Type code Type code Example 135-70 Nominal diameter DN Magnetic length [mm] Magnetic coupling sizes Magnetic length [mm] Magnetic coupling diameter DN 60 DN 75 DN 110 DN 135 DN 165 40 x x x 50 x x 60 x x x x 70 x x 80 x x x 90 x x 100 x x 110 x 120 x 360 360 360, 470 360, 470 470 Bearing bracket Maintenance-friendly and safe design Assemblies are easy-to-replace spare parts The cartridge insert (TOE-MN) or assembly unit (TOE-MA, TOE-MI) are the parts of the pump getting in touch with the medium to be pumped. They can be removed easily from the volute casing without dismantling the pipes. Both are available as a single spare part and the best choice for quick and falseless repair. We recommend to put at least one cartridge insert/assembly unit into stock. Further subassemblies are designed in the same way. In the event of servicing, they can be ordered and replaced as a single spare part. Flushing bore holes Current eddy, viscosity and bearing friction losses lead to higher temperatures within the pump and have to be added to the media temperature. Flushing bore holes in the inner rotor and the casing ensure that these critical places are cooled by the medium to be pumped. In addition, light ends are discharged from the inner rotor. Temperature control If required (e.g. in potentially explosive areas), temperature sensors can be installed in the bracket to control the surface temperature of the separating can. Assemblies Sleeve bearing bracket Casing cover + sleeve bearing + impeller + shaft + inner magnetic rotor + separating can TOE-MN: Cartridge insert Sleeve bearing bracket + rolling bearing bracket + bracket TOE-MN: Rolling bearing bracket Bearing casing + outer magnetic rotor + coupling insert TOE-MA/MI: Assembly unit Sleeve bearing bracket + bracket + outer magnetic rotor + coupling insert
8 Order-related tests Pressure tests Speck Pumpen carries out the tests below as standard: Gas pressure test The gas pressure test is used to prove that the components are leakproof. All components that bear pressure are tested, such as the volute casing, casing cover and mechanical seal casing. The test is carried out with forming gas at 2 bar. The holding time is 15 minutes. Hydrostatic pressure test The hydrostatic pressure test is used to prove strength of the components and that the pump is leak-proof. The fully assembled pump is tested. The test is carried out with a hydrostatic test pressure based on pren 12162; the hydrostatic test pressure corresponds to 1.3 x the nominal pressure (PN16) at 20 C. The holding time is 10 minutes. If you want to use pressure tests according to different criteria, please enter them in the request. Testing the performance At the customer's request, Speck Pumpen offers the following tests: Hydraulic tests Measurement according to DIN EN ISO 9906, Class II, Acceptance Class 2B, Edition March 2013 NPSH test In this test, the suction-side pressure is gradually reduced until the decrease in the delivered head reaches 3 % at a constant flow rate. At least four flows are evaluated that are spread appropriately over the admissible operating range. The NPSH value is not a guarantee point. Vibration test Vibration test according to EN ISO 5199, Edition 2002 The vibration values are measured radially and vertically at every operating point on the bearing casing at the nominal speed and with the corresponding flow rate. Temperature mesurement The measurement is taken on the motor-side bearing at operating temperature. The operating temperature and the ambient temperature at every operating point measured are documented. Computer-controlled and fully automated test stands on the premises of Speck Pumpen in Roth. Measuring of hydraulics, power requirements, axial thrust, vibrations and NPSH values. Heads of up to 400 m and flow rates of up to 750 m³/h are possible..
9 Further data and notes Standard conditions at site Relative humidity during continuous operation max. 85 % Ambient temperature from -20 C to +40 C Permissible altitude up to 1000 m above seal level Deviations from the site conditions specified herein must already be disclosed in the inquiry. Painting The pumps are coated with highly heat-resistant white aluminium paint, colour code RAL 9006. Dimensioning Assessment of the maximum pump outlet pressure The pump outlet pressure at the pump nozzle depends on the pump inlet pressure the maximum total head of the selected impeller diameter the density of the medium to be pumped The maximum pump out let pressure p 2max op is calculated using the formula: p 2max op = p 1max op + ρ g H 10-5 With: p 2max op = maximum pump outlet pressure [bar] p 1max op = maximum pump inlet pressure [bar] ρ = density of the medium to be pumped [kg/m³] g = gravitation constant [m/s²] H = maximum total head at zero flow or at the peak of the pump's characteristic curve at the selected impeller diameter [m] Pumps must be selected and operated in a way which ensures that the maximum pump outlet pressure does by no means exceed the maximum permissible operating pressure of the casing p all w c at operating pressure. This also applies to commissioning while the discharge valve is closed (refer to diagram). Pressure and temperature limitations The maximum casing operating pressure p all w c of the volute casing and the casing cover depends on the operating temperature: 17 [bar] 16 15 14 13 12 11 10 9 max. casing operating pressure stainless steel versions spheroidal graphite cast iron versions 8-120 -60 0 60 120 180 240 300 360 operating temperature [ C] Maximum permissible casing operating pressure p all w c
10 TOE-MN / MA Characteristic curves 50 Hz Q [U.S.GPM] H [m] 100 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 1/min 320 H [feet] 90 280 80 70 32-250 40-250 50-250 65-250 240 60 2015 80-250 200 50 32-200 100-250 160 40 30 20 32-160 40-200 40-160 50-200 50-160 65-160 65-200 80-160 80-200 100-200 125-200 120 80 10 100-160 40 0 0 0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 Q [m 3 /h] Q [U.S.GPM] H [m] 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 25,0 1/min 22,5 80 70 H [feet] 20,0 17,5 32-250 40-250 50-250 65-250 60 15,0 2015 80-250 50 12,5 32-200 100-250 40 10,0 7,5 32-160 40-200 40-160 50-200 50-160 65-200 80-200 30 5,0 65-160 80-160 100-200 125-200 20 2,5 100-160 10 0 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Bearing bracket 360 Bearing bracket 470 Casing with double volute Casing with centreline mounting 2015 As of 2015 Q [m3 /h]
11 60 Hz Q [U.S.GPM] H [m] 100 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 3500 1/min 320 H [feet] 90 32-250 40-250 280 80 32-200 70 40-200 50-250 50-200 2015 80-250 240 60 50 32-160 40-160 50-160 65-160 65-200 65-250 80-160 80-200 100-250 100-200 200 160 40 120 30 20 100-160 80 10 40 0 0 0 40 80 120 160 200 240 280 320 360 400 440 480 125-200 not available for 60 Hz/3500 1/min Q [m 3 /h] Q [U.S.GPM] H [m] 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 40 1750 1/min 35 130 120 110 H [feet] 30 100 32-250 90 25 20 15 32-200 32-160 40-200 40-160 40-250 50-200 50-250 65-200 65-250 2015 80-250 80-200 100-250 80 70 60 50 50-160 65-160 80-160 100-200 40 10 125-200 30 5 100-160 20 10 0 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 Bearing bracket 360 Bearing bracket 470 Casing with double volute Casing with centreline mounting 2015 As of 2015 Q [m 3 /h]
12 TOE-MI Characteristic curves 50 Hz Q [U.S.GPM] H [m] 60 0 50 100 150 200 250 300 350 400 1/min 180 H [feet] 50 160 40 40-200 140 65-200 65/80-200 120 30 40-160-A 50-200 100 40-160-B 80 20 60 10 40 20 0 0 10 20 30 40 50 60 70 80 90 0 Q [m 3 /h] Q [U.S.GPM] H [m] 14 0 25 50 75 100 125 150 175 200 1/min 45 H [feet] 12 40 10 40-200 35 65-200 65/80-200 30 8 40-160-A 50-200 25 6 40-160-B 20 4 2 15 10 5 0 0 5 10 15 20 25 30 35 40 45 0 Bearing bracket 360 40-160 with hydraulics A or B available Q [m3 /h]
13 60 Hz Q [U.S.GPM] H [m] 80 0 50 100 150 200 250 300 350 400 450 500 3500 1/min 275 250 H [feet] 70 225 60 40-200 200 50 50-200 65-200 65/80-200 175 150 40 40-160-B 40-160-A 125 30 100 20 75 50 10 25 0 0 10 20 30 40 50 60 70 80 90 100 110 0 Q [m 3 /h] Q [U.S.GPM] H [m] 22,5 20,0 0 25 50 75 100 125 150 175 200 225 250 1750 1/min 70 H [feet] 17,5 60 15,0 40-200 65-200 65/80-200 50 12,5 50-200 40 10,0 40-160-B 40-160-A 30 7,5 20 5,0 2,5 10 0 0 5 10 15 20 25 30 35 40 45 50 55 0 Bearing bracket 360 40-160 with hydraulics A or B available Q [m3 /h]
14 TOE-MN / MA Dimensions and connections Bearing bracket 360 a 465 x bl br DND T1 T2 T3 td ts 50 P1 15 h2 TOE-MN DNS 1 24 P2 h1 14 m2 m1 255 40 b D1 13 110 140 n2 n1 a 292 x bl br DND T1 T2 T3 td ts P1 15 h2 TOE-MA DNS P2 h1 2 14 m2 m1 255 40 b D1 13 110 140 n2 n1 Größe DNS DS ts DND DD td a bl br h1 h2 b m1 m2 n1 n2 x 32-160 50 165 20 32 140 15 80 116 121 132 160 50 100 70 240 190 110 32-200 50 165 20 32 140 18 80 123 135 160 180 50 100 70 240 190 110 32-250 50 165 20 32 140 18 100 152 163 180 225 65 125 95 320 250 110 40-160 65 185 20 40 150 18 80 123 129 132 160 50 100 70 240 190 110 40-200 65 185 20 40 150 18 100 127 141 160 180 50 100 70 265 212 110 40-250 65 185 20 40 150 18 100 151 160 180 225 65 125 95 320 250 110 50-160 65 185 20 50 165 20 100 123 136 160 180 50 100 70 265 212 110 50-200 65 185 20 50 165 20 100 130 148 160 200 50 100 70 265 212 110 50-250 65 185 20 50 165 20 100 157 170 180 225 65 125 95 320 250 110 65-160 80 200 22 65 185 20 100 124 151 160 200 65 125 95 280 212 110 65-200 80 200 22 65 185 20 100 136 164 180 225 65 125 95 320 250 110 80-160 100 220 24 80 200 22 125 139 174 180 225 65 125 95 320 250 110 Utility connections P1 G 1/4 Manometer connection pressure-side (without bore) P2 G 1/8 Manometer connection suction-side (without bore) D1 G 3/8 Drainage volute casing T1 G 1/4 Temperature sensor PT 100 (magnetic coupling 110 / 135 / 165) T2 G 1/4 Temperature sensor PT 100 (magnetic coupling 75) T3 G 1/4 Temperature sensor PT 100 (magnetic coupling 60) Fiitting key DIN 6885 Feet applicable for motor design B5 only Flange dimensions page 16
15 TOE-MN / MA Dimensions and connections Bearing bracket 470 a 625 x bl br DND P1 b1 td T1 ts 80 P2 h2 TOE-MN DNS 1 h1 32 s1 m2 m1 333 40 b D1 13 110 140 n2 n1 a 377 x bl br TOE-MA b1 DNS td ts DND T1 P2 P1 h2 h1 s1 m2 m1 333 40 2 b D1 13 110 140 n2 n1 Größe DNS DS ts DND DD td a bl br h1 h2 b b1 m1 m2 n1 n2 øs1 x 65-250 80 200 22 65 185 20 100 233,5 233,5 200 250 80 18 160 120 360 280 18 140 80-200 1 100 220 24 80 200 22 125 162,5 191 180 250 65 15 125 95 345 280 14 140 80-250 2 100 220 24 80 200 22 125 181 206,5 200 280 80 18 160 120 400 315 18 140 100-160 125 254 26 100 230 25 125 233,5 233,5 200 280 80 18 160 120 360 280 18 140 100-200 3 125 254 26 100 230 25 125 233,5 233,5 200 280 80 18 160 120 360 280 18 140 100-250 3 125 254 26 100 230 25 140 230 230 225 280 80 18 160 120 400 315 18 140 125-200 3 150 285 26 125 254 26 140 262 262 250 315 80 18 160 120 400 315 18 140 1 Casing with feet resp. without centreline mounting 2 Casing with feet as of 2015 casing with centreline mounting 3 Casing with double volute Utility connections P1 G 1/4 Manometer connection pressure-side (without bore) P2 G 1/8 Manometer connection suction-side (without bore) D1 G 3/8 Drainage volute casing T1 G 1/4 Temperature sensor PT 100 (magnetic coupling 110 / 135 / 165) Fitting key DIN 6885 Feet applicable for motor design B5 only Flange dimensions page 16
16 TOE-MI Dimensions and connections Bearing bracket 360 a k x bl br td DND P1 T1 T2 T3 h1 h2 TOE-MI ts P2 D1 DNS Größe Gehäuse Casing DNS DND a DD DS td ts bl br h1 h2 k x 40-160 INA 40 40 97 150 150 20 20 116 116 200 190 395,5 110 40-160 INB 40 40 97 150 150 20 20 116 116 180 160 395,5 110 40-200 INA 40 40 93 150 150 20 20 135 135 200 190 399,5 110 50-200 INA 50 50 102 165 165 21 21 126 139 220 205 399,5 110 50-200 INB 50 50 92 165 165 21 21 126 139 200 180 409,5 110 65-200 INA 65 65 112 185 185 23 23 131 151 240 225 400,5 110 65/80-200 INB 80 80 112 200 200 23 23 131 151 255 225 400,5 110 Utility connections P1 G 1/4 Manometer connection pressure-side (without bore) P2 G 1/8 Manometer connection suction-side (without bore) D1 G 3/8 Drainage volute casing T1 G 1/4 Temperature sensor PT 100 (magnetic coupling 110 / 135 / 165) T2 G 1/4 Temperature sensor PT 100 (magnetic coupling 75) T3 G 1/4 Temperature sensor PT 100 (magnetic coupling 60) Flange dimensions Flanges Flansche in acc. nach with DIN DIN EN EN 1092-2 DN ød1 ød3 Löcher Holes 32 100 19 4 40 110 19 4 50 125 19 4 65 145 19 4 80 160 19 8 100 180 19 8 125 210 19 8 150 240 23 8 Flansche Flanges gefertigt in acc. with nach DIN DIN EN EN 1092-2, drilled gebohrt in acc. nach with ANSI ANSI 150 150 lbs lbs DN ød1 ød3 Löcher Holes 32 88,9 16 4 40 98,6 16 4 50 120,7 19 4 65 139,7 19 4 80 152,4 19 4 100 190,5 19 8 125 215,9 22 8 150 241,3 22 8 4 x 8 x D3 DN D1
17 Interchangeability of parts All series including the versions with mechanical seal ( brochure TOE GN/GA/GI series) offer a high degree of interchangeability. Same components within TOE-MN/MA/MI series Compare only numbers within one row: 1 and 1 = same number means same component 1 and 2 and... = different numbers mean different components Pump size 32-160 32-200 32-250 40-160 Component No. Series Bearing bracket complete 1 MN MA MI 1 2 1 2 1 2 1 2 1 3 4 3 5 4 3 4 Volute casing 102 MN MA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 MI 20 21 22 23 Casing cover 161 MN MA MI 1 2 1 2 1 2 1 2 1 3 4 3 5 4 3 4 Shaft 211 MN MA MI 1 2 Impeller 230 MN MA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 MI 1 20 5 8 Sleeve bearing 1 310 MN MA MI 1 1 2 1 Bearing casing / rolling bearing / bearing cover 330 / 320 / 360 MN 1 2 Bracket 341 MN MA MI 1 2 Flat gasket 400 MN MA MI 1 2 Flat gasket 400.1 MN MA 1 1 1 Flat gasket 400.2 / 400.3 MN MA MI 1 1 2 1 Counter flange 720 MN MA 1 1 1 Coupling insert 1 843 MN MA MI 1 1 2 1 Magnetic coupling complete 1 847 MN MA MI 1 1 2 1 further parts MN MA MI 1 2 40-200 40-250 50-160 50-200 50-250 65-160 65-200 80-160 65-250 80-200 80-250 100-160 100-200 100-250 125-200 1 Interchangeable with identical sizes of magnetic coupling only. 400 400.2 211 847 400.1/720 400 400.2 211 847 102 230 161 310/400.3 341 843 320/330/360 102 230 161 310/400.3 341 843
18 TOE-MN Aggregate dimensions Bearing bracket 360 a 465 z* e g DND G2 G1 DNS G5* h2 24 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-32-160 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 50 32 80 160 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 280 380 330 227 95 38 260 18,5 850 100 650 60 50 19 42 877 100 935 50 80 0,75 1,10 19 280 380 330 227 95 38 260 18,5 850 100 650 60 50 19 42 877 100 935 50 90S 1,1 1,5 24 280 380 330 227 95 38 264 18,5 850 100 650 60 50 24 42 922 100 980 50 90L 1,5 2,2 24 280 380 330 227 95 38 264 18,5 850 100 650 60 50 24 42 948 100 1006 50 100L 2,2 3,0 28 280 380 330 227 95 38 279 18,5 950 100 750 60 50 24 52 997 100 1045 60 100L 3,0 28 280 380 330 227 95 38 279 18,5 950 100 750 60 50 24 52 997 100 1045 60 112M 4,0 4,0 28 280 380 330 227 95 38 301 18,5 950 100 750 60 50 24 52 991 100 1039 50 132S 5,5 5,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132S 7,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132M 7,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1103 100 1145 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1283 100 1315 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1319 100 1345 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1359 100 1385 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1440 100 1460 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1439 100 1465 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1470 100 1490 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1548 100 1560 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140
19 TOE-MN-32-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 50 32 80 180 TOE-MN-32-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 50 32 100 225 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 280 380 330 255 95 38 288 18,5 850 100 650 60 50 19 42 877 100 935 50 80 0,75 1,10 19 280 380 330 255 95 38 288 18,5 850 100 650 60 50 19 42 877 100 935 50 90S 1,1 1,5 24 280 380 330 255 95 38 292 18,5 850 100 650 60 50 24 42 922 100 980 50 90L 1,5 2,2 24 280 380 330 255 95 38 292 18,5 850 100 650 60 50 24 42 948 100 1006 50 100L 2,2 3,0 28 280 380 330 255 95 38 307 18,5 950 100 750 60 50 24 52 997 100 1045 60 100L 3,0 28 280 380 330 255 95 38 307 18,5 950 100 750 60 50 24 52 997 100 1045 60 112M 4,0 4,0 28 280 380 330 255 95 38 329 18,5 950 100 750 60 50 24 52 991 100 1039 50 132S 5,5 5,5 38 280 380 330 255 95 38 348 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132S 7,5 38 280 380 330 255 95 38 348 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132M 7,5 38 280 380 330 255 95 38 348 18,5 1050 100 850 60 50 28 58 1103 100 1145 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1283 100 1315 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1319 100 1345 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1359 100 1385 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1440 100 1460 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1439 100 1465 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1470 100 1490 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1548 100 1560 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 80 0,75 1,10 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 90S 1,1 1,5 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 942 100 1000 50 90L 1,5 2,2 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 968 100 1026 50 100L 2,2 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 100L 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 350 450 400 280 100 38 349 18,5 950 100 750 72,5 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132S 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132M 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140
20 TOE-MN Aggregate dimensions Bearing bracket 360 a 465 z* e g DND G2 G1 DNS G5* h2 24 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-40-160 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 40 80 160 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 280 380 330 227 95 38 260 18,5 850 100 650 60 50 19 42 877 100 935 50 80 0,75 1,10 19 280 380 330 227 95 38 260 18,5 850 100 650 60 50 19 42 877 100 935 50 90S 1,1 1,5 24 280 380 330 227 95 38 264 18,5 850 100 650 60 50 24 42 922 100 980 50 90L 1,5 2,2 24 280 380 330 227 95 38 264 18,5 850 100 650 60 50 24 42 948 100 1006 50 100L 2,2 3,0 28 280 380 330 227 95 38 279 18,5 950 100 750 60 50 24 52 997 100 1045 60 100L 3,0 28 280 380 330 227 95 38 279 18,5 950 100 750 60 50 24 52 997 100 1045 60 112M 4,0 4,0 28 280 380 330 227 95 38 301 18,5 950 100 750 60 50 24 52 991 100 1039 50 132S 5,5 5,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132S 7,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1065 100 1107 100 132M 7,5 38 280 380 330 227 95 38 320 18,5 1050 100 850 60 50 28 58 1103 100 1145 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1228 100 1260 100 160L 15,0 18,5 42 350 450 400 270 110 38 437 18,5 1200 100 1000 60 50 38 68 1283 100 1315 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1319 100 1345 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1359 100 1385 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1389 100 1415 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1440 100 1460 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1439 100 1465 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1470 100 1490 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1548 100 1560 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1540 100 1560 140
21 TOE-MN-40-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 40 100 180 TOE-MN-40-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 40 100 225 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 80 0,75 1,10 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 90S 1,1 1,5 24 300 400 350 260 100 38 292 18,5 850 100 650 60 50 24 42 942 100 1000 50 90L 1,5 2,2 24 300 400 350 260 100 38 292 18,5 950 100 750 60 50 24 42 968 100 1026 50 100L 2,2 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 100L 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 300 400 350 260 100 38 329 18,5 950 100 750 60 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132S 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132M 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 80 0,75 1,10 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 90S 1,1 1,5 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 942 100 1000 50 90L 1,5 2,2 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 968 100 1026 50 100L 2,2 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 100L 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 350 450 400 280 100 38 349 18,5 950 100 750 72,5 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132S 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132M 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140
22 TOE-MN Aggregate dimensions Bearing bracket 360 a 465 z* e g DND G2 G1 DNS G5* h2 24 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-50-160 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 50 100 180 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 80 0,75 1,10 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 90S 1,1 1,5 24 300 400 350 260 100 38 292 18,5 850 100 650 60 50 24 42 942 100 1000 50 90L 1,5 2,2 24 300 400 350 260 100 38 292 18,5 950 100 750 60 50 24 42 968 100 1026 50 100L 2,2 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 100L 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 300 400 350 260 100 38 329 18,5 950 100 750 60 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132S 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132M 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140
23 TOE-MN-50-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 50 100 200 TOE-MN-50-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 65 50 100 225 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 80 0,75 1,10 19 300 400 350 260 100 38 288 18,5 850 100 650 60 50 19 42 897 100 955 50 90S 1,1 1,5 24 300 400 350 260 100 38 292 18,5 850 100 650 60 50 24 42 942 100 1000 50 90L 1,5 2,2 24 300 400 350 260 100 38 292 18,5 950 100 750 60 50 24 42 968 100 1026 50 100L 2,2 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 100L 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 60 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 300 400 350 260 100 38 329 18,5 950 100 750 60 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132S 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1085 100 1127 100 132M 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 60 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 60 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 60 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 70 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 70 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 70 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 70 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 70 65 48 80 1560 100 1580 140 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 80 0,75 1,10 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 90S 1,1 1,5 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 942 100 1000 50 90L 1,5 2,2 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 968 100 1026 50 100L 2,2 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 100L 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 350 450 400 280 100 38 349 18,5 950 100 750 72,5 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132S 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132M 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140
24 TOE-MN Aggregate dimensions Bearing bracket 360 a 465 z* e g DND G2 G1 DNS G5* h2 24 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-65-160 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 80 65 100 200 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 300 400 350 260 100 38 288 18,5 850 100 650 72,5 50 19 42 897 100 955 50 80 0,75 1,10 19 300 400 350 260 100 38 288 18,5 850 100 650 72,5 50 19 42 897 100 955 50 90S 1,1 1,5 24 300 400 350 260 100 38 292 18,5 850 100 650 72,5 50 24 42 942 100 1000 50 90L 1,5 2,2 24 300 400 350 260 100 38 292 18,5 950 100 750 72,5 50 24 42 968 100 1026 50 100L 2,2 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 100L 3,0 28 300 400 350 260 100 38 307 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 300 400 350 260 100 38 329 18,5 950 100 750 72,5 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 72,5 50 28 58 1085 100 1127 100 132S 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 72,5 50 28 58 1085 100 1127 100 132M 7,5 38 300 400 350 260 100 38 348 18,5 1100 100 900 72,5 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 260 100 38 437 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 260 100 38 437 18,5 1200 100 1000 72,5 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140
25 TOE-MN-65-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 80 65 100 225 TOE-MN-80-160 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 100 80 125 225 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 80 0,75 1,10 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 897 100 955 50 90S 1,1 1,5 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 942 100 1000 50 90L 1,5 2,2 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 968 100 1026 50 100L 2,2 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 100L 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1017 100 1065 60 112M 4,0 4,0 28 350 450 400 280 100 38 349 18,5 950 100 750 72,5 50 24 52 1011 100 1059 50 132S 5,5 5,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132S 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1085 100 1127 100 132M 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1123 100 1165 100 160M 11,0 11,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160M 15,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1248 100 1280 100 160L 15,0 18,5 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1303 100 1335 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1339 100 1365 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1379 100 1405 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1409 100 1435 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1460 100 1480 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1459 100 1485 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1490 100 1510 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1568 100 1580 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1560 100 1580 140 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 80 0,55 0,75 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 922 100 980 50 80 0,75 1,10 19 350 450 400 280 100 38 308 18,5 950 100 750 72,5 50 19 42 922 100 980 50 90S 1,1 1,5 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 967 100 1025 50 90L 1,5 2,2 24 350 450 400 280 100 38 312 18,5 950 100 750 72,5 50 24 42 993 100 1051 50 100L 2,2 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1042 100 1090 60 100L 3,0 28 350 450 400 280 100 38 327 18,5 950 100 750 72,5 50 24 52 1042 100 1090 60 112M 4,0 4,0 28 350 450 400 280 100 38 349 18,5 950 100 750 72,5 50 24 52 1036 100 1084 50 132S 5,5 5,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1110 100 1152 100 132S 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1110 100 1152 100 132M 7,5 38 350 450 400 280 100 38 368 18,5 1050 100 850 72,5 50 28 58 1148 100 1190 100 160M 11,0 11,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1273 100 1305 100 160M 15,0 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1273 100 1305 100 160L 15,0 18,5 42 350 450 400 280 100 38 457 18,5 1200 100 1000 72,5 50 38 68 1328 100 1360 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1364 100 1390 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1300 100 1100 72,5 50 42 74 1404 100 1430 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1434 100 1460 110 200L 37,0 55 440 550 500 302 102 42 521 24 1300 155 990 82,5 65 42 74 1434 100 1460 110 225 S 37,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1485 100 1505 110 225M 45,0 55 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 42 74 1484 100 1510 110 225M 45,0 60 480 590 540 327 102 42 571 24 1350 155 1040 82,5 65 48 80 1515 100 1535 110 250M 55,0 65 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 55 88 1593 100 1605 140 250M 45,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1585 100 1605 140 250M 55,0 60 530 640 590 355 105 42 617 24 1400 155 1090 82,5 65 48 80 1585 100 1605 140
26 TOE-MN Aggregate dimensions Bearing bracket 470 a 625 e z* g DND G2 G1 DNS G5* h2 32 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-65-250 Lagerträger Bearing bracket 470 470 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 80 65 100 250 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1177 140 1265 60 100L 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1177 140 1265 60 112M 4,0 4,0 28 400 500 450 310 110 38 369 18,5 1200 100 1000 90 50 24 52 1171 140 1259 60 132S 5,5 5,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1245 140 1327 100 132S 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1245 140 1327 100 132M 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1283 140 1365 100 160M 11,0 11,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1408 140 1480 100 160M 15,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1408 140 1480 100 160L 15,0 18,5 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1463 140 1535 100 180M 18,5 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1499 140 1565 110 180L 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1539 140 1605 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1569 140 1635 110 200L 37,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1569 140 1635 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1620 140 1680 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 100 65 42 74 1619 140 1685 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1650 140 1710 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1728 140 1780 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1720 140 1780 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1720 140 1780 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1802 140 1840 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1838 140 1890 140
27 TOE-MN-80-200 Lagerträger Bearing bracket 470 470 Gehäuse Casing without ohne achsmittige centreline mounting Aufhängung * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 100 80 125 250 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 400 500 450 290 110 38 327 18,5 1200 100 1000 72,5 50 24 52 1202 140 1290 60 100L 3,0 28 400 500 450 290 110 38 327 18,5 1200 100 1000 72,5 50 24 52 1202 140 1290 60 112M 4,0 4,0 28 400 500 450 290 110 38 349 18,5 1200 100 1000 72,5 50 24 52 1196 140 1284 60 132S 5,5 5,5 38 400 500 450 290 110 38 368 18,5 1300 100 1100 72,5 50 28 58 1270 140 1352 100 132S 7,5 38 400 500 450 290 110 38 368 18,5 1300 100 1100 72,5 50 28 58 1270 140 1352 100 132M 7,5 38 400 500 450 290 110 38 368 18,5 1300 100 1100 72,5 50 28 58 1308 140 1390 100 160M 11,0 11,0 42 400 500 450 290 110 38 457 18,5 1400 100 1200 72,5 50 38 68 1433 140 1505 100 160M 15,0 42 400 500 450 290 110 38 457 18,5 1400 100 1200 72,5 50 38 68 1433 140 1505 100 160L 15,0 18,5 42 400 500 450 290 110 38 457 18,5 1400 100 1200 72,5 50 38 68 1488 140 1560 100 180M 18,5 22,0 48 400 500 450 290 110 38 477 18,5 1500 100 1300 72,5 50 42 74 1524 140 1590 110 180L 22,0 48 400 500 450 290 110 38 477 18,5 1500 100 1300 72,5 50 42 74 1564 140 1630 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1500 155 1190 82,5 65 42 74 1594 140 1660 110 200L 37,0 55 440 550 500 302 102 42 521 24 1500 155 1190 82,5 65 42 74 1594 140 1660 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 82,5 65 48 80 1645 140 1705 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 82,5 65 42 74 1644 140 1710 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 82,5 65 48 80 1675 140 1735 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 82,5 65 55 88 1753 140 1805 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 82,5 65 48 80 1745 140 1805 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 82,5 65 48 80 1745 140 1805 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 82,5 65 65 102 1827 140 1865 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 82,5 65 55 88 1863 140 1915 140 TOE-MN-80-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen Lagerträger Bearing bracket 470 470 DNS DND a h2 Gehäuse Casing without ohne achsmittige centreline mounting, Aufhängung, ab As of 2015 2015 mit with achsmittiger centreline Aufhängung mounting 100 80 125 280 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 440 540 490 302 102 42 347 24 1200 155 890 100 65 24 52 1202 140 1290 60 100L 3,0 28 440 540 490 302 102 42 347 24 1200 155 890 100 65 24 52 1202 140 1290 60 112M 4,0 4,0 28 440 540 490 302 102 42 369 24 1200 155 890 100 65 24 52 1196 140 1284 60 132S 5,5 5,5 38 440 540 490 302 102 42 388 24 1300 155 990 100 65 28 58 1270 140 1352 100 132S 7,5 38 440 540 490 302 102 42 388 24 1300 155 990 100 65 28 58 1270 140 1352 100 132M 7,5 38 440 540 490 302 102 42 388 24 1300 155 990 100 65 28 58 1308 140 1390 100 160M 11,0 11,0 42 440 540 490 302 102 42 477 24 1400 155 1090 100 65 38 68 1433 140 1505 100 160M 15,0 42 440 540 490 302 102 42 477 24 1400 155 1090 100 65 38 68 1433 140 1505 100 160L 15,0 18,5 42 440 540 490 302 102 42 477 24 1400 155 1090 100 65 38 68 1488 140 1560 100 180M 18,5 22,0 48 440 540 490 302 102 42 497 24 1500 155 1190 100 65 42 74 1524 140 1590 110 180L 22,0 48 440 540 490 302 102 42 497 24 1500 155 1190 100 65 42 74 1564 140 1630 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 200L 37,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1645 140 1705 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 100 65 42 74 1644 140 1710 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1675 140 1735 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1753 140 1805 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1827 140 1865 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1863 140 1915 140
28 TOE-MN Aggregate dimensions Bearing bracket 470 a 625 e z* g DND G2 G1 DNS G5* h2 32 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-100-160 Lagerträger Bearing bracket 470 470 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen DNS DND a h2 125 100 125 280 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1202 140 1290 60 100L 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1202 140 1290 60 112M 4,0 4,0 28 400 500 450 310 110 38 369 18,5 1200 100 1000 90 50 24 52 1196 140 1284 60 132S 5,5 5,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1270 140 1352 100 132S 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1270 140 1352 100 132M 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1308 140 1390 100 160M 11,0 11,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1433 140 1505 100 160M 15,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1433 140 1505 100 160L 15,0 18,5 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1488 140 1560 100 180M 18,5 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1524 140 1590 110 180L 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1564 140 1630 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 200L 37,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1645 140 1705 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 100 65 42 74 1644 140 1710 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1675 140 1735 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1753 140 1805 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1827 140 1865 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1863 140 1915 140
29 TOE-MN-100-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen Lagerträger Bearing bracket 470 470 DNS DND a h2 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung and with und double mit volute Doppelspirale 125 100 125 280 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1202 140 1290 60 100L 3,0 28 400 500 450 310 110 38 347 18,5 1200 100 1000 90 50 24 52 1202 140 1290 60 112M 4,0 4,0 28 400 500 450 310 110 38 369 18,5 1200 100 1000 90 50 24 52 1196 140 1284 60 132S 5,5 5,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1270 140 1352 100 132S 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1270 140 1352 100 132M 7,5 38 400 500 450 310 110 38 388 18,5 1300 100 1100 90 50 28 58 1308 140 1390 100 160M 11,0 11,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1433 140 1505 100 160M 15,0 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1433 140 1505 100 160L 15,0 18,5 42 400 500 450 310 110 38 477 18,5 1400 100 1200 90 50 38 68 1488 140 1560 100 180M 18,5 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1524 140 1590 110 180L 22,0 48 400 500 450 310 110 38 497 18,5 1500 100 1300 90 50 42 74 1564 140 1630 110 200L 30,0 30,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 200L 37,0 55 440 550 500 302 102 42 521 24 1500 155 1190 100 65 42 74 1594 140 1660 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1645 140 1705 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 100 65 42 74 1644 140 1710 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1675 140 1735 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1753 140 1805 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1745 140 1805 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1827 140 1865 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1863 140 1915 140 TOE-MN-100-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen Lagerträger Bearing bracket 470 470 DNS DND a h2 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung and with und double mit volute Doppelspirale 125 100 140 280 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 440 540 490 327 102 42 372 24 1200 155 890 100 65 24 52 1217 140 1305 60 100L 3,0 28 440 540 490 327 102 42 372 24 1200 155 890 100 65 24 52 1217 140 1305 60 112M 4,0 4,0 28 440 540 490 327 102 42 394 24 1200 155 890 100 65 24 52 1211 140 1299 60 132S 5,5 5,5 38 440 540 490 327 102 42 413 24 1300 155 990 100 65 28 58 1285 140 1367 100 132S 7,5 38 440 540 490 327 102 42 413 24 1300 155 990 100 65 28 58 1285 140 1367 100 132M 7,5 38 440 540 490 327 102 42 413 24 1300 155 990 100 65 28 58 1323 140 1405 100 160M 11,0 11,0 42 440 540 490 327 102 42 502 24 1400 155 1090 100 65 38 68 1448 140 1520 100 160M 15,0 42 440 540 490 327 102 42 502 24 1400 155 1090 100 65 38 68 1448 140 1520 100 160L 15,0 18,5 42 440 540 490 327 102 42 502 24 1400 155 1090 100 65 38 68 1503 140 1575 100 180M 18,5 22,0 48 440 540 490 327 102 42 522 24 1500 155 1190 100 65 42 74 1539 140 1605 110 180L 22,0 48 440 540 490 327 102 42 522 24 1500 155 1190 100 65 42 74 1579 140 1645 110 200L 30,0 30,0 55 440 550 500 327 102 42 546 24 1500 155 1190 100 65 42 74 1609 140 1675 110 200L 37,0 55 440 550 500 327 102 42 546 24 1500 155 1190 100 65 42 74 1609 140 1675 110 225S 37,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1660 140 1720 110 225M 45,0 55 480 590 540 327 102 42 571 24 1550 155 1240 100 65 42 74 1659 140 1725 110 225M 45,0 60 480 590 540 327 102 42 571 24 1550 155 1240 100 65 48 80 1690 140 1750 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1768 140 1820 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1760 140 1820 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1760 140 1820 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1842 140 1880 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1878 140 1930 140
30 TOE-MN Aggregate dimensions Bearing bracket 470 a 625 e z* g DND G2 G1 DNS G5* h2 32 D L4 L2** L3** L1 G3** R1** L5** B1 B3** B2** TOE-MN-125-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen ** Grundplatte Base plate with mit brackets Laschen Lagerträger Bearing bracket 470 470 DNS DND a h2 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung and with und double mit volute Doppelspirale 150 125 140 315 Motor Aggregate Aggregatmaße dimensions Kupplung Coupling / Gesamtlänge Total length Welle Shaft DKM ZS-DKM-H kw kw ød B1 B2** B3** G1 G2 G3** G5* ør1** L1 L2** L3** L4 L5** Größe e z* e z* g 100L 2,2 3,0 28 440 540 490 352 102 42 397 24 1200 155 890 100 65 24 52 1217 140 1305 60 100L 3,0 28 440 540 490 352 102 42 397 24 1200 155 890 100 65 24 52 1217 140 1305 60 112M 4,0 4,0 28 440 540 490 352 102 42 419 24 1200 155 890 100 65 24 52 1211 140 1299 60 132S 5,5 5,5 38 440 540 490 352 102 42 438 24 1300 155 990 100 65 28 58 1285 140 1367 100 132S 7,5 38 440 540 490 352 102 42 438 24 1300 155 990 100 65 28 58 1285 140 1367 100 132M 7,5 38 440 540 490 352 102 42 438 24 1300 155 990 100 65 28 58 1323 140 1405 100 160M 11,0 11,0 42 440 540 490 352 102 42 527 24 1400 155 1090 100 65 38 68 1448 140 1520 100 160M 15,0 42 440 540 490 352 102 42 527 24 1400 155 1090 100 65 38 68 1448 140 1520 100 160L 15,0 18,5 42 440 540 490 352 102 42 527 24 1400 155 1090 100 65 38 68 1503 140 1575 100 180M 18,5 22,0 48 440 540 490 352 102 42 547 24 1500 155 1190 100 65 42 74 1539 140 1605 110 180L 22,0 48 440 540 490 352 102 42 547 24 1500 155 1190 100 65 42 74 1579 140 1645 110 200L 30,0 30,0 55 440 550 500 352 102 42 571 24 1500 155 1190 100 65 42 74 1609 140 1675 110 200L 37,0 55 440 550 500 352 102 42 571 24 1500 155 1190 100 65 42 74 1609 140 1675 110 225S 37,0 60 480 590 540 352 102 42 596 24 1550 155 1240 100 65 48 80 1660 140 1720 110 225M 45,0 55 480 590 540 352 102 42 596 24 1550 155 1240 100 65 42 74 1659 140 1725 110 225M 45,0 60 480 590 540 352 102 42 596 24 1550 155 1240 100 65 48 80 1690 140 1750 110 250M 55,0 65 530 640 590 355 105 42 617 24 1650 155 1340 100 65 55 88 1768 140 1820 140 250M 45,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1760 140 1820 140 250M 55,0 60 530 640 590 355 105 42 617 24 1650 155 1340 100 65 48 80 1760 140 1820 140 280S 75,0 75 580 690 640 385 105 42 685 24 1750 155 1440 100 65 65 102 1842 140 1880 140 280M 90,0 65 580 690 640 385 105 42 685 24 1750 155 1440 100 65 55 88 1878 140 1930 140
31 TOE-MN Allocation of base plates Base plate designation (example) U S 400. 580. 1000 1600 U = U steel base plate S = welded base plate Width Length Base plates available with or without brackets. Allocation of base plates depending on motor, coupling and pump size Motor size: 80 90S 90L 100 112 132S 132M 160M 160L 180M 180L Coupling size: 19 24 24 24 24 28 28 38 38 42 42 32-160 U280.0850 U280.0850 U280.0850 U280.0950 U280.0950 U280.1050 U280.1050 U350.1200 U350.1200 U400.1300 U400.1300 32-200 U280.0850 U280.0850 U280.0850 U280.0950 U280.0950 U280.1050 U280.1050 U350.1200 U350.1200 U400.1300 U400.1300 32-250 U350.0950 U350.0950 U350.0950 U350.0950 U350.0950 U350.1100 U350.1100 U350.1200 U350.1200 U400.1300 U400.1300 40-160 U280.0850 U280.0850 U280.0850 U280.0950 U280.0950 U280.1050 U280.1050 U350.1200 U350.1200 U400.1300 U400.1300 40-200 U300.0850 U300.0850 U300.0950 U300.0950 U300.0950 U300.1100 U300.1100 U350.1200 U350.1200 U400.1300 U400.1300 40-250 U350.0950 U350.0950 U350.0950 U350.0950 U350.0950 U350.1100 U350.1100 U350.1200 U350.1200 U400.1300 U400.1300 50-160 U300.0850 U300.0850 U300.0950 U300.0950 U300.0950 U300.1100 U300.1100 U350.1200 U350.1200 U400.1300 U400.1300 50-200 U300.0850 U300.0850 U300.0950 U300.0950 U300.0950 U300.1100 U300.1100 U350.1200 U350.1200 U400.1300 U400.1300 50-250 U350.0950 U350.0950 U350.0950 U350.0950 U350.0950 U350.1100 U350.1100 U350.1200 U350.1200 U400.1300 U400.1300 65-160 U300.0750 U300.0750 U300.0950 U300.0950 U300.0950 U300.1100 U300.1100 U350.1200 U350.1200 U400.1300 U400.1300 65-200 U350.0950 U350.0950 U350.0950 U350.0950 U350.0950 U350.1100 U350.1100 U350.1200 U350.1200 U400.1300 U400.1300 65-250 U400.1200 U400.1200 U400.1300 U400.1300 U400.1400 U400.1400 U400.1500 U400.1500 80-160 U350.0950 U350.0950 U350.0950 U350.0950 U350.0950 U350.1100 U350.1100 U350.1200 U350.1200 U400.1300 U400.1300 80-200 U400.1200 U400.1200 U400.1300 U400.1300 U400.1400 U400.1400 U400.1500 U400.1500 80-250 S440.1200 S440.1200 S440.1300 S440.1300 S440.1400 S440.1400 S440.1500 S440.1500 100-160 U400.1200 U400.1200 U400.1300 U400.1300 U400.1400 U400.1400 U400.1500 U400.1500 100-200 U400.1200 U400.1200 U400.1300 U400.1300 U400.1400 U400.1400 U400.1500 U400.1500 100-250 S440.1200 S440.1200 S440.1300 S440.1300 S440.1400 S440.1400 S440.1500 S440.1500 125-200 S440.1200 S440.1200 S440.1300 S440.1300 S440.1400 S440.1400 S440.1500 S440.1500 Pump size Motor size: 200 225S 225M 2-pole 225M 4-pole 250M 2-pole 250M 4-pole 280S 2-pole 280S 4-pole 280M 2-pole 280M 4-pole Coupling size: 42 48 42 48 48 55 55 65 55 65 32-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 32-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 32-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 40-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 40-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 40-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 50-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 50-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 50-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 65-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 65-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 65-250 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 80-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 80-200 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 80-250 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 100-160 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 100-200 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 100-250 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 125-200 S440.1500 S480.1550 S480.1550 S480.1550 S530.1650 S530.1650 S580.1750 S580.1750 S580.1750 S580.1750 Pump size
32 TOE-MA Aggregate dimensions Bearing bracket 360 a 292 z* o g DND G1 DNS P G5* h2 14 m2 m1 255 40 b 13 110 140 n2 n1 a 292 z* o g DND G1 DNS P G5* h2 AA* A AB* 14 m2 m1 w1 BB* B K* b n2 n1 TOE-MA-32-160 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 50 32 80 160 240 190 100 70 50 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 132 260 622 50 80 B5 200 0,75 1,10 - - - - - - 19-0 132 260 622 50 90S B5 200 1,1 1,5 - - - - - - 24-0 132 264 657 50 90L B5 200 1,5 2,2 - - - - - - 24-0 132 264 683 50 100L B5 250 2,2 3,0 - - - - - - 28-0 132 279 712 60 100L B5 250 3,0 - - - - - - 28-0 132 279 706 60 112M B5 250 4,0 4,0 - - - - - - 28-0 132 301 734 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 152 340 774 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 152 340 774 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 152 340 812 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 962 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 992 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1032 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1107 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1112 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1137 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1207 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1207 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1207 140
33 TOE-MA-32-200 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 50 32 80 180 240 190 100 70 50 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 160 288 622 50 80 B5 200 0,75 1,10 - - - - - - 19-0 160 288 622 50 90S B5 200 1,1 1,5 - - - - - - 24-0 160 292 657 50 90L B5 200 1,5 2,2 - - - - - - 24-0 160 292 683 50 100L B5 250 2,2 3,0 - - - - - - 28-0 160 307 712 60 100L B5 250 3,0 - - - - - - 28-0 160 307 706 60 112M B5 250 4,0 4,0 - - - - - - 28-0 160 329 734 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 160 348 774 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 160 348 774 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 160 348 812 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 962 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 992 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1032 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1107 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1112 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1137 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1207 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1207 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1207 140 TOE-MA-32-250 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 50 32 100 225 320 250 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 180 308 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 180 308 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 180 312 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 180 312 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 732 60 100L B5 250 3,0 - - - - - - 28-0 180 327 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 180 368 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 280 647 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 280 647 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 280 647 1227 140
34 TOE-MA Aggregate dimensions Bearing bracket 360 a 292 z* o g DND G1 DNS P G5* h2 14 m2 m1 255 40 b 13 110 140 n2 n1 a 292 z* o g DND G1 DNS P G5* h2 AA* A AB* 14 m2 m1 w1 BB* B K* b n2 n1 TOE-MA-40-160 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 40 80 160 240 190 100 70 50 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 132 260 622 50 80 B5 200 0,75 1,10 - - - - - - 19-0 132 260 622 50 90S B5 200 1,1 1,5 - - - - - - 24-0 132 264 657 50 90L B5 200 1,5 2,2 - - - - - - 24-0 132 264 683 50 100L B5 250 2,2 3,0 - - - - - - 28-0 132 279 712 60 100L B5 250 3,0 - - - - - - 28-0 132 279 706 60 112M B5 250 4,0 4,0 - - - - - - 28-0 132 301 734 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 152 340 774 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 152 340 774 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 152 340 812 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 907 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 962 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 992 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1032 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1062 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1107 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1112 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1137 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1207 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1207 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1207 140
35 TOE-MA-40-200 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 40 100 180 265 212 100 70 50 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 160 288 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 160 288 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 160 292 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 160 292 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 160 307 732 60 100L B5 250 3,0 - - - - - - 28-0 160 307 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 160 329 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 160 348 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 TOE-MA-40-250 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 40 100 225 320 250 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 180 308 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 180 308 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 180 312 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 180 312 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 732 60 100L B5 250 3,0 - - - - - - 28-0 180 327 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 180 368 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 280 647 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 280 647 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 280 647 1227 140
36 TOE-MA Aggregate dimensions Bearing bracket 360 a 292 z* o g DND G1 DNS P G5* h2 14 m2 m1 255 40 b 13 110 140 n2 n1 a 292 z* o g DND G1 DNS P G5* h2 AA* A AB* 14 m2 m1 w1 BB* B K* b n2 n1 TOE-MA-50-160 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 50 100 180 265 212 100 70 50 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 160 288 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 160 288 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 160 292 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 160 292 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 160 307 732 60 100L B5 250 3,0 - - - - - - 28-0 160 307 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 160 329 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 160 348 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1227 140
37 TOE-MA-50-200 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 50 100 200 265 212 100 100 70 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 160 288 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 160 288 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 160 292 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 160 292 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 160 307 732 60 100L B5 250 3,0 - - - - - - 28-0 160 307 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 160 329 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 160 348 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 TOE-MA-50-250 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 65 50 100 225 320 250 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 180 308 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 180 308 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 180 312 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 180 312 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 732 60 100L B5 250 3,0 - - - - - - 28-0 180 327 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 180 368 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 280 647 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 280 647 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 280 647 1227 140
38 TOE-MA Aggregate dimensions Bearing bracket 360 a 292 z* o g DND G1 DNS P G5* h2 14 m2 m1 255 40 b 13 110 140 n2 n1 a 292 z* o g DND G1 DNS P G5* h2 AA* A AB* 14 m2 m1 w1 BB* B K* b n2 n1 TOE-MA-65-160 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 80 65 100 200 280 212 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 160 288 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 160 288 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 160 292 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 160 292 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 160 307 732 60 100L B5 250 3,0 - - - - - - 28-0 160 307 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 160 329 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 160 348 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 160 348 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 275 642 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 275 642 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 275 642 1227 140
39 TOE-MA-65-200 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 80 65 100 225 320 250 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 180 308 642 50 80 B5 200 0,75 1,10 - - - - - - 19-0 180 308 642 50 90S B5 200 1,1 1,5 - - - - - - 24-0 180 312 677 50 90L B5 200 1,5 2,2 - - - - - - 24-0 180 312 703 50 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 732 60 100L B5 250 3,0 - - - - - - 28-0 180 327 726 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 754 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 180 368 794 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 180 368 832 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 927 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 982 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1012 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1052 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1082 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1127 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1132 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1157 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 280 647 1227 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 280 647 1227 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 280 647 1227 140 TOE-MA-80-160 * Maße Dimensions können depending je nach Motorhersteller motor abweichen on the supplier DNS DND a h2 n1 n2 m1 m2 b 80 65 125 225 320 250 125 95 65 Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 80 B5 200 0,55 0,75 - - - - - - 19-0 180 308 667 50 80 B5 200 0,75 1,10 - - - - - - 19-0 180 308 667 50 90S B5 200 1,1 1,5 - - - - - - 24-0 180 312 702 50 90L B5 200 1,5 2,2 - - - - - - 24-0 180 312 728 50 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 757 60 100L B5 250 3,0 - - - - - - 28-0 180 327 751 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 779 50 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 401 20 180 368 819 100 132S B35 300 7,5 140 180 216 50 256 12 38 401 20 180 368 819 100 132M B35 300 7,5 178 218 216 50 256 12 38 401 20 180 368 857 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 430 30 180 457 952 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 430 30 180 457 952 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 430 30 180 457 1007 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 443 30 180 477 1037 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 443 30 180 477 1077 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 455 30 200 521 1107 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 455 30 200 521 1107 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 501 60 225 571 1152 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 471 30 225 571 1157 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 501 60 225 571 1182 110 250M B35 550 55,0 349 445 406 80 490 24 65 520 60 280 647 1252 140 250M B35 550 45,0 349 445 406 80 490 24 60 520 60 280 647 1252 140 250M B35 550 55,0 349 445 406 80 490 24 60 520 60 280 647 1252 140
40 TOE-MA Aggregate dimensions Bearing bracket 470 a 377 o z* g DND G1 DNS G5* h2 AA* s1 K* b A AB* m2 m1 w1 BB* B n2 n1 TOE-MA-65-250 Lagerträger Bearing bracket 470 470 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung DNS DND a h2 n1 n2 m1 m2 b Øs1 80 65 100 250 360 280 160 120 80 18 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 200 347 817 60 100L B5 250 3,0 - - - - - - 28-0 200 347 811 60 112M B5 250 4,0 4,0 - - - - - - 28-0 200 369 839 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 200 388 859 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 200 388 859 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 200 388 897 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 200 477 982 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 200 477 982 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 200 477 1037 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 200 497 1067 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 200 497 1107 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 200 521 1163 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 200 521 1163 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1186 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1221 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1216 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1320 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1320 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1320 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1380 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1380 140
41 TOE-MA-80-200 Lagerträger Bearing bracket 470 470 Gehäuse Casing without ohne achsmittige centreline mounting Aufhängung DNS DND a h2 n1 n2 m1 m2 b Øs1 100 80 125 250 345 280 125 95 65 14 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 180 327 842 60 100L B5 250 3,0 - - - - - - 28-0 180 327 836 60 112M B5 250 4,0 4,0 - - - - - - 28-0 180 349 864 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 180 368 884 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 180 368 884 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 180 368 922 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 180 457 1007 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 180 457 1007 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 180 457 1062 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 180 477 1092 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 180 477 1132 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1211 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1246 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1241 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1345 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1405 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1405 140 TOE-MA-80-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Lagerträger Bearing bracket 470 470 DNS DND a h2 n1 n2 m1 m2 b Øs1 Gehäuse Casing without ohne achsmittige centreline mounting, Aufhängung, 100 80 125 280 400 315 160 120 80 18 ab As of 2015 2015 mit with achsmittiger centreline Aufhängung mounting Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 200 347 842 60 100L B5 250 3,0 - - - - - - 28-0 200 347 836 60 112M B5 250 4,0 4,0 - - - - - - 28-0 200 369 864 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 200 388 922 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 200 477 1062 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 200 497 1092 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 200 497 1132 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1211 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1246 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1241 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1345 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1405 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1405 140
42 TOE-MA Aggregate dimensions Bearing bracket 470 a 377 o z* g DND G1 DNS G5* h2 AA* s1 K* b A AB* m2 m1 w1 BB* B n2 n1 TOE-MA-100-160 Lagerträger Bearing bracket 470 470 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung DNS DND a h2 n1 n2 m1 m2 b Øs1 125 100 125 280 360 280 160 120 80 18 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 200 347 842 60 100L B5 250 3,0 - - - - - - 28-0 200 347 836 60 112M B5 250 4,0 4,0 - - - - - - 28-0 200 369 864 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 200 388 922 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 200 477 1062 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 200 497 1092 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 200 497 1132 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1211 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1246 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1241 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1345 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1405 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1405 140
43 TOE-MA-100-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Lagerträger Bearing bracket 470 470 DNS DND a h2 n1 n2 m1 m2 b Øs1 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung 125 100 125 280 360 280 160 120 80 18 und and with mit Doppelspirale double volute Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 200 347 842 60 100L B5 250 3,0 - - - - - - 28-0 200 347 836 60 112M B5 250 4,0 4,0 - - - - - - 28-0 200 369 864 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 200 388 884 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 200 388 922 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 200 477 1007 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 200 477 1062 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 200 497 1092 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 200 497 1132 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 200 521 1188 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1211 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1246 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1241 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1345 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1345 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1405 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1405 140 TOE-MA-100-250 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Lagerträger Bearing bracket 470 470 DNS DND a h2 n1 n2 m1 m2 b Øs1 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung 125 100 140 280 400 315 160 120 80 18 und and with mit Doppelspirale double volute Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 225 372 857 60 100L B5 250 3,0 - - - - - - 28-0 225 372 851 60 112M B5 250 4,0 4,0 - - - - - - 28-0 225 394 879 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 225 413 899 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 225 413 899 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 225 413 937 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 225 502 1022 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 225 502 1022 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 225 502 1077 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 225 522 1107 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 225 522 1147 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 225 546 1203 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 225 546 1203 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 225 571 1226 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 225 571 1261 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 225 571 1256 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1360 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1360 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1360 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1420 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1420 140
44 TOE-MA Aggregate dimensions Bearing bracket 470 a 377 o z* g DND G1 DNS G5* h2 AA* s1 K* b A AB* m2 m1 w1 BB* B n2 n1 TOE-MA-125-200 * Maße Dimensions können depending je nach Motorhersteller on the motor supplier abweichen Lagerträger Bearing bracket 470 470 DNS DND a h2 n1 n2 m1 m2 b Øs1 Gehäuse Casing with mit centreline achsmittiger mounting Aufhängung and with und 150 125 140 315 400 315 160 120 80 18 mit double Doppelspirale volute Motor Aggregate Aggregatmaße dimensions Bau- Design form Flansch Flange Welle Shaft øp kw kw B BB* A AA* AB* øk* ød w1 o G1 G5* z* g 100L B5 250 2,2 3,0 - - - - - - 28-0 250 397 857 60 100L B5 250 3,0 - - - - - - 28-0 250 397 851 60 112M B5 250 4,0 4,0 - - - - - - 28-0 250 419 879 60 132S B35 300 5,5 5,5 140 180 216 50 256 12 38 466 0 250 438 899 100 132S B35 300 7,5 140 180 216 50 256 12 38 466 0 250 438 899 100 132M B35 300 7,5 178 218 216 50 256 12 38 466 0 250 438 937 100 160M B35 350 11,0 11,0 210 260 254 65 320 14,5 42 485 0 250 527 1022 100 160M B35 350 15,0 210 260 254 65 320 14,5 42 485 0 250 527 1022 100 160L B35 350 15,0 18,5 254 305 254 65 320 14,5 42 485 0 250 527 1077 100 180M B35 350 18,5 22,0 241 315 279 70 355 14,5 48 498 0 250 547 1107 110 180L B35 350 22,0 279 355 279 70 355 14,5 48 498 0 250 547 1147 110 200L B35 400 30,0 30,0 305 375 318 70 395 18,5 55 536 26 250 571 1203 110 200L B35 400 37,0 305 375 318 70 395 18,5 55 536 26 250 571 1203 110 225S B35 450 37,0 286 375 356 75 435 18,5 60 560 34 250 596 1226 110 225M B35 450 45,0 311 400 256 75 435 18,5 55 560 34 250 596 1261 110 225M B35 450 45,0 311 400 256 75 435 18,5 60 560 34 250 596 1256 110 250M B35 550 55,0 349 445 406 80 490 24 65 613 68 250 617 1360 140 250M B35 550 45,0 349 445 406 80 490 24 60 613 68 250 617 1360 140 250M B35 550 55,0 349 445 406 80 490 24 60 613 68 250 617 1360 140 280S B35 550 75,0 368 439 457 125 550 24 75 635 68 280 685 1420 140 280M B35 550 90,0 419 490 457 125 550 24 65 635 68 280 685 1420 140
45 TOE-MA Allocation of base plates Base plate designation (example) U S 400. 580. 1000 1600 U = U steel base plate S = welded base plate Width Length Base plates available with or without brackets. Allocation of base plates depending on motor, coupling and pump size Motor size: 80 90S 90L 100 112 132S 132M 160M 160L 180M 180L Coupling size: 19 24 24 24 24 28 28 38 38 42 42 32-160 U280.0750 U280.0750 U280.0750 U280.0750 U280.0750 U280.0850 U280.0850 U350.0950 U350.0950 U400.1000 U400.1000 32-200 U280.0750 U280.0750 U280.0750 U280.0750 U280.0750 U280.0850 U280.0850 U350.0950 U350.0950 U400.1000 U400.1000 32-250 U350.0750 U350.0750 U350.0750 U350.0750 U350.0750 U350.0850 U350.0850 U350.0950 U350.0950 U400.1000 U400.1000 40-160 U280.0750 U280.0750 U280.0750 U280.0750 U280.0750 U280.0850 U280.0850 U350.0950 U350.0950 U400.1000 U400.1000 40-200 U300.0750 U300.0750 U300.0750 U300.0750 U300.0750 U300.0850 U300.0850 U350.0950 U350.0950 U400.1000 U400.1000 40-250 U350.0750 U350.0750 U350.0750 U350.0750 U350.0750 U350.0850 U350.0850 U350.0950 U350.0950 U400.1000 U400.1000 50-160 U300.0750 U300.0750 U300.0750 U300.0750 U300.0750 U300.0850 U300.0850 U350.0950 U350.0950 U400.1000 U400.1000 50-200 U300.0750 U300.0750 U300.0750 U300.0750 U300.0750 U300.0850 U300.0850 U350.0950 U350.0950 U400.1000 U400.1000 50-250 U350.0750 U350.0750 U350.0750 U350.0750 U350.0750 U350.0850 U350.0850 U350.0950 U350.0950 U400.1000 U400.1000 65-160 U300.0750 U300.0750 U300.0750 U300.0750 U300.0750 U300.0850 U300.0850 U350.0950 U350.0950 U400.1000 U400.1000 65-200 U350.0750 U350.0750 U350.0750 U350.0750 U350.0750 U350.0850 U350.0850 U350.0950 U350.0950 U400.1000 U400.1000 65-250 U400.1000 U400.1000 U400.1100 U400.1100 U400.1200 U400.1200 U400.1200 U400.1200 80-160 U350.0750 U350.0750 U350.0750 U350.0750 U350.0750 U350.0850 U350.0850 U350.0950 U350.0950 U400.1000 U400.1000 80-200 U400.1000 U400.1000 U400.1100 U400.1100 U400.1200 U400.1200 U400.1200 U400.1200 80-250 S440.1100 S440.1100 S440.1100 S440.1100 S440.1200 S440.1200 S440.1200 S440.1200 100-160 U400.1000 U400.1000 U400.1100 U400.1100 U400.1200 U400.1200 U400.1200 U400.1200 100-200 U400.1000 U400.1000 U400.1100 U400.1100 U400.1200 U400.1200 U400.1200 U400.1200 100-250 S440.1100 S440.1100 S440.1100 S440.1100 S440.1200 S440.1200 S440.1200 S440.1200 125-200 S440.1100 S440.1100 S440.1100 S440.1100 S440.1200 S440.1200 S440.1200 S440.1200 Pump size Motor size: 200 225S 225M 2-pole 225M 4-pole 250M 2-pole 250M 4-pole 280S 2-pole 280S 4-pole 280M 2-pole 280M 4-pole Coupling size: 42 48 42 48 48 55 55 65 55 65 32-160 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 32-200 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 32-250 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 40-160 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 40-200 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 40-250 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 50-160 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 50-200 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 50-250 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 65-160 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 65-200 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 65-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 80-160 S440.1100 S480.1150 S480.1150 S480.1150 S530.1200 S530.1200 80-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 80-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 100-160 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 100-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 100-250 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. 125-200 S440.1300 S480.1350 S480.1350 S480.1350 S530.1400 S530.1400 S580. S580. S580. S580. Pump size
46 Base plate dimensions G2 L4 L2* L3* L1 G3* R1* L5* B1 B3* B2* Dimensions applicable for TOE-MN, TOE-MA (with magnetic coupling) and for TOE-GN, TOE-GA (with mechanical seal) Base plate dimensions Grundplatten Base plates mit with Laschen(*) brackets(*) ohne without Laschen brackets Dimensions Maße Designation Bezeichnung Designation Bezeichnung B1 B2* B3* G2 G3* L1 L2* L3* L5* ØR1* U280.0750.L U280.0750 280 430 380 95 38 750 100 550 50 18,5 U280.0850.L U280.0850 280 430 380 95 38 850 100 650 50 18,5 U280.0950.L U280.0950 280 430 380 95 38 950 100 750 50 18,5 U280.1050.L U280.1050 280 430 380 95 38 1050 100 850 50 18,5 U300.0750.L U300.0750 300 450 400 100 38 750 100 550 50 18,5 U300.0850.L U300.0850 300 450 400 100 38 850 100 650 50 18,5 U300.0950.L U300.0950 300 450 400 100 38 950 100 750 50 18,5 U300.1100.L U300.1100 300 450 400 100 38 1100 100 900 50 18,5 U350.0750.L U350.0750 350 500 450 100 38 750 100 550 50 18,5 U350.0850.L U350.0850 350 500 450 100 38 850 100 650 50 18,5 U350.0950.L U350.0950 350 500 450 100 38 950 100 750 50 18,5 U350.1100.L U350.1100 350 500 450 100 38 1100 100 900 50 18,5 U350.1200.L U350.1200 350 500 450 100 38 1200 100 1000 50 18,5 U400.1000.L U400.1000 400 550 500 110 38 1000 100 800 50 18,5 U400.1100.L U400.1100 400 550 500 110 38 1100 100 900 50 18,5 U400.1200.L U400.1200 400 550 500 110 38 1200 100 1000 50 18,5 U400.1300.L U400.1300 400 550 500 110 38 1300 100 1100 50 18,5 U400.1400.L U400.1400 400 550 500 110 38 1400 100 1200 50 18,5 U400.1500.L U400.1500 400 550 500 110 38 1500 100 1300 50 18,5 U400.1600.L U400.1600 400 550 500 110 38 1600 100 1400 50 18,5 S440.1100.L S440.1100 440 550 490 102 42 1100 155 790 65 24,5 S440.1200.L S440.1200 440 550 490 102 42 1200 155 890 65 24,5 S440.1300.L S440.1300 440 550 490 102 42 1300 155 990 65 24,5 S440.1400.L S440.1400 440 550 490 102 42 1400 155 1090 65 24,5 S440.1500.L S440.1500 440 550 490 102 42 1500 155 1190 65 24,5 S480.1150.L S480.1150 480 590 530 102 42 1150 155 840 65 24,5 S480.1250.L S480.1250 480 590 530 102 42 1250 155 940 65 24,5 S480.1350.L S480.1350 480 590 530 102 42 1350 155 1040 65 24,5 S480..L S480. 480 590 530 102 42 155 1140 65 24,5 S480.1550.L S480.1550 480 590 530 102 42 1550 155 1240 65 24,5 S480.1650.L S480.1650 480 590 530 102 42 1650 155 1340 65 24,5 S530.1300.L S530.1300 530 640 580 105 42 1300 155 990 65 24,5 S530.1400.L S530.1400 530 640 580 105 42 1400 155 1090 65 24,5 S530.1500.L S530.1500 530 640 580 105 42 1500 155 1190 65 24,5 S530.1650.L S530.1650 530 640 580 105 42 1650 155 1340 65 24,5 S580..L S580. 580 690 630 105 42 155 1140 65 24,5 S580.1600.L S580.1600 580 690 630 105 42 1600 155 1290 65 24,5 S580.1750.L S580.1750 580 690 630 105 42 1750 155 1440 65 24,5 Dimensions depending on the pump size U-Version U S-Version S Pumpengröße Pump size Dimensions Maße L4 32-160 60 70 32-200 60 70 32-250 72,5 82,5 40-160 60 70 40-200 60 70 40-250 72,5 82,5 50-160 60 70 50-200 60 70 50-250 72,5 82,5 65-160 72,5 82,5 65-200 72,5 82,5 65-250 90 100 80-160 72,5 82,5 80-200 72,5 82,5 80-250 - 100 100-160 90 100 100-200 90 100 100-250 - 100 125-200 - 100
47 TOE-MI Aggregate dimensions Bearing bracket 360 z* g a k o DND h1 P HD* h2 DNS TOE-MI-40-160 * Maße Dimensions können depending je nach Motorhersteller on the motor abweichen supplier DNS DND a h1 h2 k Gehäuse Casing INA 40 40 97 200 190 288 Gehäuse Casing INB 40 40 97 180 160 288 Motor Aggregate Aggregatmaße dimensions Frame size Bauform Design Flansch Flange Welle Shaft øp kw kw ød HD* o z* g 80 B5 200 0,55 0,75 19 229 12 647 50 80 B5 200 0,75 1,10 19 229 12 647 50 90S B5 200 1,1 1,5 24 248 12 682 50 90L B5 200 1,5 2,2 24 248 12 708 50 100L B5 250 2,2 3,0 28 280 0 725 60 100L B5 250 3,0 28 280 0 725 60 112M B5 250 4,0 4,0 28 293 0 747 50 132S B5 300 5,5 5,5 38 343 20 787 100 132S B5 300 7,5 38 343 20 787 100 132M B5 300 7,5 38 343 20 850 100 160M B5 350 11,0 11,0 42 425 30 920 100 160M B5 350 15,0 42 425 30 920 100 160L B5 350 15,0 18,5 42 425 30 975 100
48 TOE-MI Aggregate dimensions Bearing bracket 360 z* g a k o DND h1 P HD* h2 DNS TOE-MI-40-200 * Maße Dimensions können depending je nach Motorhersteller on the motor abweichen supplier DNS DND a h1 h2 k Gehäuse Casing INA 40 40 93 200 190 292 Motor Aggregate Aggregatmaße dimensions Frame size Bauform Design Flansch Flange Welle Shaft øp kw kw ød HD* o z* g 80 B5 200 0,55 0,75 19 229 12 647 50 80 B5 200 0,75 1,10 19 229 12 647 50 90S B5 200 1,1 1,5 24 248 12 682 50 90L B5 200 1,5 2,2 24 248 12 708 50 100L B5 250 2,2 3,0 28 280 0 725 60 100L B5 250 3,0 28 280 0 725 60 112M B5 250 4,0 4,0 28 293 0 747 50 132S B5 300 5,5 5,5 38 343 20 787 100 132S B5 300 7,5 38 343 20 787 100 132M B5 300 7,5 38 343 20 850 100 160M B5 350 11,0 11,0 42 425 30 920 100 160M B5 350 15,0 42 425 30 920 100 160L B5 350 15,0 18,5 42 425 30 975 100
49 TOE-MI-50-200 * Maße Dimensions können depending je nach Motorhersteller on the motor abweichen supplier DNS DND a h1 h2 k Gehäuse Casing INA 50 50 102 220 205 292 Gehäuse Casing INB 50 50 92 200 180 302 Motor Aggregate Aggregatmaße dimensions Frame size Bauform Design Flansch Flange Welle Shaft øp kw kw ød HD* o z* g 90S B5 200 1,1 1,5 24 248 12 691 50 90L B5 200 1,5 2,2 24 248 12 717 50 100L B5 250 2,2 3,0 28 280 0 734 60 100L B5 250 3,0 28 280 0 734 60 112M B5 250 4,0 4,0 28 293 0 756 50 132S B5 300 5,5 5,5 38 343 20 796 100 132S B5 300 7,5 38 343 20 796 100 132M B5 300 7,5 38 343 20 859 100 160M B5 350 11,0 11,0 42 425 30 929 100 160M B5 350 15,0 42 425 30 929 100 160L B5 350 15,0 18,5 42 425 30 984 100 180M B5 350 18,5 22,0 48 466 30 1014 110 180L B5 350 22,0 48 466 30 1054 110 TOE-MI-65-200 TOE-MI-65/80-200 * Maße Dimensions können depending je nach Motorhersteller on the motor abweichen supplier DNS DND a h1 h2 k TOE-MI-65-200 Gehäuse Casing INA 65 65 112 240 225 293 TOE-MI-65/80-200 Gehäuse Casing INB 80 80 112 255 225 293 Motor Aggregate Aggregatmaße dimensions Frame size Bauform Design Flansch Flange Welle Shaft øp kw kw ød HD* o z* g 90S B5 200 1,1 1,5 24 248 12 702 50 90L B5 200 1,5 2,2 24 248 12 728 50 100L B5 250 2,2 3,0 28 280 0 745 60 100L B5 250 3,0 28 280 0 745 60 112M B5 250 4,0 4,0 28 293 0 767 50 132S B5 300 5,5 5,5 38 343 20 807 100 132S B5 300 7,5 38 343 20 807 100 132M B5 300 7,5 38 343 20 870 100 160M B5 350 11,0 11,0 42 425 30 940 100 160M B5 350 15,0 42 425 30 940 100 160L B5 350 15,0 18,5 42 425 30 995 100 180M B5 350 18,5 22,0 48 466 30 1025 110 180L B5 350 22,0 48 466 30 1065 110
50 Pumps for heat transfer technology Centrifugal pumps with mechanical seal Regenerative turbine pumps with magnetic coupling Modular system TOE-TOE-GN/GA/GI and TOE-MN/MA/MI series mean a consistent designed modular system. Hydraulics and the main part of the used components are identical and interchangeable. TOE-GN/GA/GI Series NPY-MK and CY-MK Series Tried and tested and compact close-coupled pumps with top/top casings and magnetic coupling. Developed for transporting and circulating organic or synthetic heat transfer oils and hot water. Suitable for pumped media with low amounts of non-abrasive impurities. Suitable for the delivery of gas shares due to the principle of delivery. These pumps are designed for circulating organic or synthetic heat transfer oils in heat transfer plants in acc. with DIN 4754, as well as hot water. Thermal oil versions Hot water versions Suitable for media to be pumped with little non-abrasive contaminations Media Thermal oil versions Heat transfer oil / thermal oil Hot water versions Water T min - 40 C T max + 350 C Casing + 160 C, + 180 C on request Spheroidal graphite cast iron Nominal pressure PN 16 H max ( min -1 ) Q max ( min -1 ) ATEX 100 m 550 m³/h II 3G c TX Description in full length see brochure TOE-GN/GA/GI series Media Heat transfer oil / thermal oil Water T min - 100 C T max + 350 C + 400 C on request Casing Nominal pressure H max ( min -1 ) Q max ( min -1 ) ATEX Spheroidal graphite cast iron or stainless steel + 200 C higher temp. on request PN 25 higher pressures on request 90 m 12 m³/h (200 l/min) 24 m³/h (400 l/min) on request II 2G c b TX Compact, robust, durable and safe Regenerative turbine pumps with magnetic coupling from Speck Pumpen have been used in a wide range of systems and assemblies successfully for many years. The compact design requires minimal installation space and reduces the weight. The perfected pumps also impress with the small number of extremely high-quality parts. Robust sleeve bearings made from SiC and ceramic shafts guarantee a long lifetime and are free from leakage and maintenance-free thanks to magnetic couplings. On request, Speck Pumpen can also develop special designs for special media or with different hydraulics. Please contact us.
51 Representatives 06_14 D Germany Deutschland Ost Huckauf Ingenieure GmbH Auerswalder Hauptstraße 2 09244 Lichtenau Tel.: +(49) 37208 660 80 Fax: +(49) 37208 660 77 info@huckauf.de www.huckauf.de Berlin Huckauf Ingenieure GmbH Fontanepromenade 17 10967 Berlin Tel.: +(49) 30 890 959 92 Fax: +(49) 30 890 959 91 info@huckauf.de www.huckauf.de Norddeutschland Ingenieure Willy Wandrach GmbH Flurstraße 105 22549 Hamburg Tel.: +(49) 40 398 624 0 Fax: +(49) 40 398 624 28 info@speck-nord.de www.speck-nord.de Hannover, Kassel IVT Pumpen GmbH Zum Wischfeld 1A 31749 Auetal Tel.: +(49) 5752 929 597 Fax: +(49) 5752 929 599 Mobile: +(49) 172 511 699 9 info@ivt-pumpen.de www.ivt-pumpen.de Köln Huckauf Ingenieure GmbH Grillenpfad 28 40764 Langenfeld Tel.: +(49) 2173 914 560 Fax: +(49) 2173 914 588 info@huckauf.de www.huckauf.de Bayern, Baden-Württemberg Speck Pumpen VERKAUFSGESELLSCHAFT GmbH Hauptstraße 1 3 91233 Neunkirchen a. Sand Tel.: +(49) 9123 949 0 Fax: +(49) 9123 949 260 info@speck-pumps.com www.speck-pumps.com Service Deutschland Mitte FSE Fluid Systems Erfurt Poeler Weg 6 99085 Erfurt Tel.: +(49) 361 550 715 0 Fax: +(49) 361 550 715 19 info@fluidsystems.org www.fluidsystems.org Köln Arpuma GmbH Sonnenhang 33 50127 Bergheim Tel.: +(49) 2271 837 70 Fax: +(49) 2271 837 720 info@arpuma.de www.arpuma.de International A Austria Tuma Pumpensysteme GmbH Eitnergasse 12 1230 Wien Tel.: +(43) 191 493 40 Fax.: +(43) 191 414 46 contact@tumapumpen.at www.tumapumpen.at AUS Australia Pump Solutions Australasia Unit 1 7 Bessemer Way Wangara, WA 6065 P.O. Box 1811 Wangara DC, WA 6947 Tel.: +(61) 8 9408 1544 Fax: +(61) 8 9408 1644 mike@pumpsolutions.com.au www.pumpsolutions.com.au Pump Systems Australia Factory 2 21 London Drive Bayswater /Melbourne Victoria 3153 Tel.: +(61) 397 623 100 Fax: +(61) 397 623 188 sales@pumpsystemsaustralia.com.au B Belgium Heat transfer pumps / Pompes pour fluid thermique FLOWMOTION BVBA Mergelweg 3 1730 Asse Tel.: +(32) 2 309 67 13 Fax. +(32) 2 309 69 13 info@flowmotion.be www.flowmotion.be SPECK - Pompen Belgie N.V. Bierweg 24 9880 Aalter Tel.: +(32) 937 530 39 Fax: +(32) 932 500 17 info@speckpompen.be www.speckpompen.be BG Bulgaria EVROTECH OOD 54 A, Manastirska Str. 1111 Sofia Tel.: +(359) 2 971 32 73 Fax: +(359) 2 971 22 88 office@evrotech.com www.evrotech.com CH Switzerland Speck Pumpen Subsidiary Speck Pumpen Industrie GmbH Bürglenweg 4 8854 Galgenen Tel.: +41 554 425 094 Fax: +41 554 425 094 info@speckswitzerland.com www.speckswitzerland.com Sales and Service HänyTec AG Gschwäbring 19 6244 Nebikon Tel.: +41 (62) 544 33 00 Fax: +41 (62) 544 33 10 contact@haenytec.ch www.haenytec.ch Service MEYER ARMATUREN PUMPEN GMBH Rigackerstrasse 19 5610 Wohlen Tel. + 41 56 622 77 33 Fax + 41 56 622 77 60 info@meyer-armaturen.ch www.meyer-armaturen.ch CN China Speck Pumpen Subsidiary Jiashan SPECK PUMPS Systemtechnik Ltd. No. 57, Hong Qiao Rd., No. 4 Economical Developing Zone, 314100 Jiashan Xian, Zhejiang Province Tel.: +(86) 573 847 312 98 Fax: +(86) 573 847 312 88 steveche@speck-pumps.cn www.speck-pumps.cn CZ Czech Republic Sigmet spol s.r.o. Kosmonautu č.p. 1103/6a 77200 Olomouc Tel.: +(420) 585 231 070 Fax: +(420) 585 227 072 sigmet@sigmet.cz www.sigmet.cz DK Denmark Pumpegruppen a/s Lundtoftegårdsvej 95 2800 Lyngby Tel.: +(45) 459 371 00 Fax: +(45) 459 347 55 info@pumpegruppen.dk www.pumpegruppen.dk E Spain Speck Pumpen Subsidiary SPECK BOMBAS INDUSTRIALES, S.L.U. Trafalgar, 53 despacho 6 Centro de Negocios CNAF 46023 Valencia Tel.: +(34) 963 811 094 Fax: +(34) 963 811 096 Mobile: +(34) 618 376 241 speck-spain@terra.com F France Speck Pumpen Subsidiary Speck Pompes Industries S.A. Z.I. Parc d Activités du Ried 4, rue de l Energie B.P. 227 67727 Hoerdt Cedex Tel.: +(33) 3 88 68 26 60 Fax: +(33) 3 88 68 16 86 info@speckpi.fr GB Great Britain Speck Pumpen ABC Ltd AreenA House Moston Road, Elworth, Sandbach Cheshire CW11 3HL Tel.: +(44) 844 764 063 2 Fax: +(44) 844 764 063 4 admin@speck-abc.com www.speck-abc.com GR Greece SPECK Hellas Salaminos St. 54 17676 Kallithea Tel.: +(30) 210 956 500 6 Fax: +(30) 210 957 747 3 speck.chatzigeorgopoulos@on.gr www.chatzigeorgopoulos.com I Italy Centrifugal pumps / Pompe centrifughe Klaus Union Pompe e Valvole S.r.l. Via Piave, 17 20027 Rescaldina (MI) Tel. : +(39) 033 157 982 3 Fax: +(39) 033 157 982 5 info@klausunion.it www.klausunion.it Vacuum pumps / Pompe per vuoto Rio Nanta S.r.l. Via Mauro Macchi, 42 20124 Milano Tel. +(39) 028 940 642 1 Fax: +(39) 028 323 913 Mobile: +(39) 339 658 781 6 rionanta@rionanta.it www.rionanta.it IL Israel Ambi-Tech Electronics Engineering Ltd., 20 Ta as st.; Industrial Area, Kfar-Saba P.O. Box 50 Kfar-Saba 44425 Tel.: +(972) 976 775 00 Fax: +(972) 976 774 00 Arie.Weiss@PWeiss.d2g.com www.pweiss.co.il Small pumps / heat transfer pumps : Ringel Brothers (1973) Ltd. 134 Hertzel St. P.O. Box 5148 Tel-Aviv 66555 Tel.: +(972) 368 255 05 Fax: +(972) 368 220 41 Mobile: +(972) 544 623 095 mringel@ringel-bros.co.il www.ringel-bros.co.il IND India Flux Pumps India Pvt. Ltd. 427/A-2, Gultekdi Industrial Estate Near Prabhat Printing Press Pune 411 047, Maharashtra Tel.: +(91) 020 2427 1023 Fax: +(91) 020 2427 0689 Mobile: +(91) 98504 03114 kiran.kadam@flux-pumps.in www.flux-pumps.in J Japan Rodateq, Inc. Suite 301 Oka Bldg. 2-1 - 16 Kyomachibori, Nishiku 550 0003 Osaka Tel.: +(81) 664 441 940 Fax: +(81) 664 449 050 info@rodateq.co.jp www.rodateq.co.jp Rodateq, Inc. Tokyo Branch No. 408, 3-22 - 12 Highashi Ikebukuro, Toshima - ku 170-0013 Tokyo Tel.: +(81) 359 798 818 Fax: +(81) 359 798 817 roda-t@yo.rim.or.jp www.rodateq.co.jp L Luxembourg Heat transfer pumps / Pompes pour fluid thermique FLOWMOTION BVBA Mergelweg 3 1730 Asse Tel.: +(32) 2 309 67 13 Fax. +(32) 2 309 69 13 info@flowmotion.be www.flowmotion.be MAL Malaysia Leesonmech Engineering ( M ) Sdn. Bhd. No. 18 Jalan 18, Taman Sri Kluang, 86000 Kluang, Johor Tel.: +(607) 777 105 5 Fax: +(607) 777 106 6 sales@leesonmech.com www.leesonmech.com N Norway Ing. Per Gjerdrum A/S P.O. Box 154 Nye Vakasvei 28 1360 Nesbru Tel.: +(47) 667 756 00 Fax: +(47) 667 756 01 Pg-pumps@pergjerdrum.no www.pg-marinegroup.com NL Netherlands Centrifugal pumps / Centrifugaalpompen Speck Pompen Nederland B.V. Businesspark 7Poort Stationspoort 10 6902 KG Zevenaar Tel.: +(31) 316 331 757 Fax: +(31) 316 528 618 info@speck.nl www.speck.nl Vacuum pumps / Vacuümpompen DOVAC B.V. Meer en Duin 228 2163 HD Lisse Tel.: +(31) 252 423 363 Fax: +(31) 252 417 946 info@dovac.nl www.dovac.nl Heat transfer pumps / Pompes pour fluid thermique FLOWMOTION BVBA Mergelweg 3 1730 Asse Tel.: +(32) 2 309 67 13 Fax. +(32) 2 309 69 13 info@flowmotion.be www.flowmotion.be NZ New Zealand MacEwans Pumping Systems Ltd. 19 Ride Way North Harbour Industrial Estate Tel.: +(64) 941 548 60 Fax: +(64) 941 548 68 pumps-ak@macewans.co.nz www.macewans.co.nz P Portugal Ultra Controlo Projectos Industriais, Lda. Quinta Lavi Armazém 8 Abrunheira 27 10-089 Sintra Tel.: +(351) 219 154 350 Fax: +(351) 219 259 002 info@ultra-controlo.com www.ultra-controlo.com PL Poland E.A. Krupinski Elzbieta Krupinska ul. Przymiarki 4A 31-764 Krakow Tel. / Fax: +(48) 126 455 684 biuro@krupinski.krakow.pl www.krupinski.krakow.pl RC Taiwan Speck Pumpen Subsidiary Speck Pumps Technology Taiwan Ltd. 2Fl., no. 153, Sec. 2 Datong Rd., Xizhi District New Taipei City Tel.: +(886) 286 926 220 Fax: +(886) 286 926 759 Mobile: +(886) 936 120 952 speck886@ms32.hinet.net www.speck-pumps.com.tw RCH Chile W & F Ingenieria Y Maquinas S.A. Felix de Amesti 90, Piso 6 Las Condes, Santiago Tel.: +(56) 220 629 43 Fax: +(56) 220 630 39 rwendler@tie.cl RI Indonesia PT Roda Rollen Indonesia Kompleks Pertokoan Glodok Jaya No. 30 Jl. Hayam Wuruk, Jakarta - Pusat Indonesia, 11180 Tel.: +(6221) 659 922 528 Fax: +(6221) 380 595 9 rudy@rodarollenindonesia.com ROK Corea J.C. International Inc. 2F, Bikeum Bldg. 108, Yanghwa-Ro, Mapo-Gu, 121-893 Seoul Tel.: +(82) 232 628 00 Fax: +(82) 232 569 09 jclee@jcint.co.kr www.jcint.co.kr RO Romania S.C. Gimsid S.R.L. Str. Arcului nr. 9, Arp.2 021031 Bucuresti Tel.: +(40) 21 2118701 Fax: +(40) 21 2102675 gimsid@gimsid.ro www.gimsid.ro RUS Russia Klaus Union Evgeny Gorchilin Trofimova street, 18a Trofimova street, 15 post box 60 Moscow 115432 Tel. / Fax: +(7) 495 679 409 0 gorchilin@klaus-union.ru www.klaus-union.ru S Sweden Hugo Tillquist AB P.O.Box 1120 16422 Kista Tel.: +(46) 859 463 200 Fax: +(46) 875 136 95 info@tillquist.com www.tillquist.com SK Slovakian Republic Czech Republic (CZ) SLO Slovenia SLOTEH Branko Gabric s.p. Zagrebška cesta 20 2000 Maribor Tel.: +(38) 624 614 460 Fax: +(38) 624 614 465 branko.gabric@amis.net www.sloteh.si SGP Singapore Malaysia (MAL) T Thailand Speck Pumpen Subsidiary Pump Systems Flux & Speck Co. Ltd. 181/4 Soi Anamai Srinakarin Road Suanluang Bangkok 10250 Tel.: +(662) 320 256 7 Fax: +(662) 322 248 6 thienchai@fluxspeck.com www.fluxspeck.com TR Turkey Speck Pompa Sanayi ve Ticaret Ltd. Sti. Girne Mah. Kücükyali Is Mrk. B Blok No:12 34852 Maltepe / Istanbul Tel.: +(90) 216 387 894 0 Fax: +(90) 216 387 982 9 speck@speckpompa.com.tr www.speckpompa.com.tr USA USA Speck Pumpen Subsidiary Speck Industries LP 150 South Van Brunt St. Englewood NJ 07631 Tel.: +1 201 569 3114 info@speckamerica.com www.speckamerica.com ZA Rep. South Africa AQUAPUMP ( Pty ) Ltd. Unit 54 APD Industrial park Kelvin street Kya Sand Tel.: +27 117 080 600 Fax: +27 865 864 151 Mobile: +27 824 509 078 cliff@aquapump.co.za www.aquapump.co.za D Produktion / Verwaltung Production / Administration Speck Pumpen Regensburger Ring 6 8, 91154 Roth Tel.: +(49) 9171 809 0 Fax: +(49) 9171 809 10 info@speck.de
1096.0918-10/2014 Speck Pumpen Systemtechnik GmbH Postfach 1453 91142 Roth / Germany Regensburger Ring 6-8 91154 Roth / Germany Tel.: +49 (0) 91 71 809-0 Fax: +49 (0) 91 71 809-10 info@speck.de