Clip HP Floor Wall Ceiling 180º 150 cm Driver excl. 50.000 h 14º 16º 30º 42º 120º 16x40º Luxeon/Cree IP40 3000K 4000K 500 ma 8W / 25cm 1-10V Phase CRI>80 dimmable dimmable 2700K INDEX Manual Version 2.0 May 2016 Index 2 Safety information 2 Content 2 Technical 3 Specifications 3 WIring diagram non dim driver 5 Wiring diagram Mains dim driver 7 Wiring diagram 1-10V dim driver 8 Wiring diagram DALI dim driver 10 List of symbols 11 Installation 4 SAFETY INFORMATION Always switch off mains power of the driver before connecting or maintaining any fixtures! Ambiance Max. 40º Qualified technician Do not stare into the LED Make sure all connectors are connected properly Use a source of AC power that complies to local electrical codes Block access below the work area when maintaining the unit Don t modify or install genuine parts on this product Don t install in a flammable or explosive area Warning! Some surfaces can be hot CONTENT Clip HP Wall Ceiling 150 cm 14º 16º 30º 42º Floor 180º Driver excl. 50.000 h 120º 16x40º Luxeon/Cree IP40 2700K 3000K 4000K CRI>80 500 ma 8W / 25cm 1-10V Phase dimmable dimmable 2
TECHNICAL INSTALLATION A* 1 2 28 mm 41 mm A Model 296 mm Lina Clip HP 30 cm 546 mm Lina Clip HP 55 cm 796 mm Lina Clip HP 80 cm 20 mm 1046 mm Lina Clip HP 105 cm 1296 mm Lina Clip HP 130 cm 3,5 mm Max. 3,5 mm 3 4 Tools 90º 5 6 SPECIFICATIONS LED: Cree / Luxeon Available colours: 2700K, 3000K & 4000K Power supply: 500mA Power consumption: Max. 8 Watt / 25 cm Lenses: 14º, 16º, 30º, 42º, 120º & 16x40º Housing: Blank anodised aluminum, Black anodised aluminium, White coated Cable length: 150 cm Ambient temperature: -20º C till +40º C 90º - 90º / + 90º 3 4
WIRING DIAGRAM NON DIM DRIVER CLS ND 001, non dimmable, 700mA driver 19 x 115 x 34 mm (hxwxd) CLS ND 008, non dimmable, 500-1050mA driver 30 x 129,5 x 42 mm (hxwxd) 34 mm CLS ND 008 115 mm 42 mm Number of Lina Clip HP on the CLS ND 001 30 cm 1 1 55 cm - - 129,5 mm Number of Lina Clip HP on the CLS ND 008 CLS ND 004, non dimmable, 250-1050mA driver 30 x 129,5 x 42 mm (hxwxd) CLS ND 012, non dimmable, 350-1050mA driver 30 x 129 x 76 mm (hxwxd) CLS ND 004 42 mm 129,5 mm 76 mm CLS ND 012 Number of Lina Clip HP on the CLS ND 004 129 mm Number of Lina Clip HP on the CLS ND 012 30 cm 1 4 55 cm 1 2 80 cm 1 1 105 cm 1 1 130 cm 1 1 5 6
WIRING DIAGRAM MAINS DIM DRIVER WIRING DIAGRAM 1-10V DIM DRIVER CLS ND 008, non dimmable, 500-1050mA driver 30 x 129,5 x 42 mm (hxwxd) CLS VD 001, 1-10V dimmable, 350-900mA driver 22 x 100 x 52 mm (hxwxd) Max. 12 pieces of VD 001 on 1 CLS Dimmer electr. 1-10V CLS ND 008 42 mm 52 mm CLS VD 001 129,5 mm Number of Lina Clip HP on the CLS ND 008 CLS Dimmer electr. 1-10V # 872010 100 mm N L 80,5 mm (h) 0-10 V 80,5 mm (w) Number of Lina Clip HP on the CLS VD 001 CLS VD 004, 1-10V dimmable, 350-900mA driver 21 x 103 x 67 mm (hxwxd) Max. 12 pieces of VD 004 on 1 CLS Dimmer electr. 1-10V 67 mm CLS VD 004 100 mm N L CLS Dimmer electr. 1-10V # 872010 80,5 mm (h) 0-10 V 80,5 mm (w) Number of Lina Clip HP on the CLS VD 004 80 cm 1 1 7 8
WIRING DIAGRAM DALI DIM DRIVER CLS VD 008, 1-10V dimmable, 250-700mA driver 22 x 124 x 79 mm (hxwxd) CLS DD 001, DALI dimmable, 250-700mA driver 22 x 100 x 52 mm (hxwxd) Max. 12 pieces of VD 008 on 1 CLS Dimmer electr. 1-10V 52 mm CLS DD 001 79 mm CLS VD 008 100 mm DA1 DA2 Number of Lina Clip HP on the CLS DD 001 CLS Dimmer electr. 1-10V # 872010 124 mm N L 80,5 mm (h) 0-10 V 80,5 mm (w) Number of Lina Clip HP on the CLS VD 008 30 cm 1 6 55 cm 1 3 80 cm 1 2 105 cm 1 1 130 cm 1 1 Controller Supporting DALI CLS DD 004, DALI dimmable, 350-700mA driver 21 x 103 x 67 mm (hxwxd) 67 mm CLS DD 004 103 mm DA1 DA2 Controller Supporting DALI Number of Lina Clip HP on the CLS DD 004 80 cm 1 1 9 10
LIST OF SYMBOLS Protection class One, two or three Application area Indoor or outdoor IP value Ingress Protection classifies the degrees of protection provided against the intrusion of the product Colour Available colours; Amber, blue, red or green Application area Floor, wall or ceiling Swivel Fixture is horizontally rotatable, indicated in degrees White colour temperature In different Kelvin values; Cold white, neutral white, warm white or extra warm white Colour changing RGB, RGB-W, RGB-A or AWB Swivel Fixture is vertically rotatable, indicated in degrees Dynamic White Stepless control of white light Multiple connection Daisychain connectivity r Curve Minimal bending curve in centimeters h Installation depth In centimeters Cutting length Indicated by the cutting marks ø w d Installation size In centimeters LED pitch Pitch between the LEDs in millimeters Cable length Maximum cable attached to the fixture in centimeters Power supply In VDC, VAC or milliampere Driver Inclusive or exclusive Power consumption In VA or Watt Weight In grams/kilograms Dimmable 1-10 Volt, Phase, individual, DMX dimmable or DALI Pressure Maximum pressure on the fixture in kg/cm 2 Magno dimming Accurate dimming from 100-1% by using a magnet Lifespan Of the light source in hours DMX 512 DMX input Fixture works on DMX512 protocol Lenses Availble lenses, indicated in degrees Combined product Compose your own fixture Warranty 3 or 5 years warranty on the product LEDs Kind of LED used in the fixture Plug & play Easy connection using the SmartConnect system Conformité Européenne CE marking for free marketability of industrial goods within the EU Energy label 2016 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/general-terms.pdf 11 12