0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses 80 CRI standard and 90 CRI available Integrated AC Direct Drive (No DC Driver) UL Classified (B/C option) 0VAC dedicated Input UL Recognized (A option) <0% Flicker High Voltage Barrier and 5VA rated Lens TRIAC / ELV Dimmable with Smooth Dimming Energy Star Listed Luminaire.0 General Specifications Input Voltage Input Current Input Power Input PF THD Operating Frequency Max Lumen Output @ Full Power Dimming Type/Range Beam Angle CRI Operating Ambient Temperature Range (Ta) Maximum Engine Case Temperature Maximum Lens Temperature Estimated Lumen Maintenance (at Max Tc) Color Consistency Overall Size Wire Type/ Length LED Quantity Weight Maximum Screw Installation Torque Safety/Compliance RFI/EMI Input Surge Protection 0VAC (08~3VAC);50/60 Hz ~0.94A 3W >0.98 <0% 0Hz 470 lumens @ 4000K / 80 CRI Leading Edge (TRIAC) or Trailing Edge (ELV) /00% ~ 0% 0 80 (standard), 90 available -35 to 50 C / -3 to +ºF L70: Tc max=90 C (Ts=95 C) / L90: Tc max=85 C (Ts=90 C) Lens: 90 C / 94ºF L70= >54,000 hours / L90= >8,000 hours Binning per ANSI C78.377-0 @5 C; 4 SDCM 6.97" diameter x 0.8 H ( B option with lens) 8AWG / Black and White wires 64 Pcs. A:(Engine Only) 54g 35 inch - ounces B:(Eng + Lens) 5g C:(Kit) 348g DirectAC Engines: curus (File # E486778 ) TAT003ACxxxA Retrofit Kits: culus (File # E486779), culus (File # E486779) Compliant Dry and Damp Location IC Over Temperature Control FCC Part 5B Consumer, EN5505.5kV Common and Differential mode (Per ES Ring Wave Test) Sound Rating / Noise A / <4 dba Percent Flicker <0% Flicker Index <0.0409 Protective Lens/Enclosure High Voltage Barrier / 3mm Clear Polycarbonate 5VA Flame rated Lens Transmittance <7.5% PCB Material MCPCB Warranty 5 years @ Max. Tc from the date of manufacture Electrolytic Capacitor Rating >60,000 hours Measured electrical data per UL file Page of
Part Number Matrix T J T 0 03 A C 8 40 B 3 Engine Type A= DirectAC Engine (Recognized) J= DirectAC Engine Retrofit Kit (Classified) Dimming T = TRIAC/ ELV Input Voltage 0 = 0VAC Electrical and Optical Specifications Input Power 03 = 3W Material A=MCPCB+wire Shape C=Circular CRI 8 = 80 9 = 90 Color Temperature Option 7 = 700K A = DirectAC Engine 30 = 3000K B = DirectAC Engine 35 = 3500K +Lens 40 = 4000K (Retrofit Kit) 50 = 5000K C = DirectAC Engine +Lens +Plate (Retrofit Kit) Color Temperature DirectAC Engine Part Number Input Power Nominal Luminous Flux @ 90 CRI Engine Efficacy @ 90 CRI Nominal Luminous Flux @ 80 CRI Engine Efficacy @ 80 CRI 700K TJT003ACx7B 3W 95 lumens 83 lm/w 5 lumens 96 lm/w 3000K TJT003ACx30B 3W 00 lumens 87 lm/w 330 lumens 0 lm/w 3500K TJT003ACx35B 3W 00 lumens 87 lm/w 330 lumens 0 lm/w 4000K TJT003ACx40B 3W 5 lumens 9 lm/w 470 lumens 07 lm/w 5000K TJT003ACx50B 3W 5 lumens 9 lm/w 470 lumens 07 lm/w Luminous Flux De-Rating: CCT and CRI Multipliers 700K 3000K 3500K 4000K 5000K CRI 80(R9> 0) CRI 90(R9>50) 0.90 0.94 0.94.00.00 0.78 0.8 0.8 0.86 0.86 NOTES: ) DirectAC Engines standard model "B" comes with engine and lens. 3 Standard Product offering (All other options are made to order with MOQ and lead time) LED Engine Retrofit Kit includes mounting hardware, retrofit labels, and installation instructions. Page of
Thermal Specifications Storage Temperature Range DirectAC Engine (A) -35 C(-3 F) to 00 C( F) DirectAC Engine Retrofit Kit (B) -35 C(-3 F) to 00 C( F) DirectAC Engine Retrofit Kit (C) -35 C(-3 F) to 00 C( F) Operating Ambient Temperature Range -35 C(-3 F) to 50 C( F) -35 C(-3 F) to 40 C(04 F) -35 C(-3 F) to 45 C(3 F) Maximum Engine Case Temperature (Tc) L70: Tc max=90 C (Ts=95 C) / L90: Tc max=85 C (Ts=90 C) Maximum Lens Temperature 4 90 C (94ºF) 4 90 C (94ºF) Tc located on module Thermal De-Rating: Tc vs. Luminous Flux Module Case Temperature (T c) 5ºC 30ºC 35ºC 40ºC 45ºC 50ºC 55ºC 60ºC 65ºC 70ºC 75ºC 80ºC 85ºC 90ºC 95ºC 00ºC Luminous Flux Multiplier.000.000 0.99 0.97 0.963 0.953 0.944 0.935 0.95 0.96 0.897 0.888 0.879 0.869 0.850 0.84 NOTES: ) Refer to LED Engine Retrofit Kit Installation Instructions for further detail. ) This LED Engine Kit can retrofit any luminaire with a length/height greater or equal to the minimum dimensions shown on the Installation Instructions. 3) This LED Engine Kit can be used with luminaires similar to the one illustrated on the Installation Instructions. 4 Suitable for ceiling luminaire with minimum dimensions: 8.5 diameter with a height of.. Page 3 of
Certification Chart Energy Star TM- Calculator Data Classification Model TAT003ACxxxA YES YES Tc Module Reported L70 Reported L90 50 C 80 C >54,000 Hrs >54,000 Hrs >8,000 Hrs >8,000 Hrs 00 C >54,000 Hrs 8,000 Hrs Listed CSD NO Tc Module Calculated L70 Calculated L90 50 C 80 C >6,000 Hrs >6,000 Hrs >8,000 Hrs >8,000 Hrs 00 C 6,000 Hrs 8,000 Hrs Product Image: 3W Round AC Engine Kit CAUTION: THIS LUMINAIRE HAS BEEN MODIFIED TO OPERATE LED LAMPS. DO NOT ATTEMPT TO INSTALL OR OPERATE FLUORESCENT LAMPS IN THIS LUMINAIRE. NOTICE - THIS LUMINAIRE HAS BEEN MODIFIED AND CAN NO LONGER OPERATE THE ORIGINALLY INTENDED LAMP. (WITH RESPECT TO FIRE AND SHOCK ONLY) FOR USE ONLY WITH PRODUCTS DESCRIBED AND INSTALLED IN ACCORDANCE WITH THE INSTRUCTION PROVIDED WITH THIS RETROFIT KIT. NOTES: ) Energy Star Listed: LED Engine Retrofit Kit only: Hardware and Labels https://www.energystar.gov/productfinder/product/certified-light-fixtures/results?scrollto=34&search_text=fulham&fixture_type_isopen=&markets_filter=united+states &zip_code_filter=&product_types=select+a+product+category&sort_by=light_output_lumens&sort_direction=asc&page_number=0&lastpage=0 Page 4 of
Mechanical Drawings 3.6" TAT003ACxxxA (Engine Only) ø4.06".53" ø6.69" R." THRU 7x ENGINE 3.3".04" Top View Side View Exploded View ø3.77" (Engine + Lens).8" LENS ø6.97" ENGINE." R.07" ø.4" THRU 4x Top View (Engine + Lens + Plate).89".37" Side View Exploded View LENS ø3.77" ENGINE.9" ø6.97" ø9.50" Screw Nut with Tooth Washer, 6-3 Grounding Wire THRU HOLE 3x, 0 On ø9.0" B.C. Mounting Plate.08" M3.63 x.06 thread x 0mm Countersunk Flat Head Phillips thread-forming screws (4x) Top View Side View Exploded View Page 5 of
Accessories TLEOPT0-008 (Lens) Clear polycarbonate protective lens acts as a high voltage barrier and meets the 5VA Flame rating. It can be order separately and used with TAT003ACxxxA option as UL Recognize component product. Hardware not included. ø.4" THRU (4x) ø3.77" ø6.97" Back Mounting For M3.63 x.06 thread x 0mm Countersunk Flat Head Phillips thread-forming screws (x4).8" Lens 7g.37" TLE-HSK-006 (Mounting Plate) Top View Side View Mounting Plate, can be use for improved thermals and ease of mounting. It can be order separately and used with TAT003ACxxxA option as a UL Recognized component product or with option as a UL Classified product. Four thread forming screws (M3.63 x.06 thread 0mm) are provided in order to attach the lens and DirectAC Engine to the Mounting Plate. Ground wire pre-attached to Mounting Plate. R.07" Mounting Plate 3g ø9.50" ø3.90" 3.9" 7.8".6" 3.5".37" Grounding Stud PEM FHS-63-6.08" 6.77" Top View Side View Page 6 of
Guidelines Reduced Flicker Operation Feature DirectAC Engine models have added circuitry to help reduce the Flicker when operated on the 50/60Hz power lines. The Flicker percentage on these models is below 30% when operated at line voltage, per CEC requirement. Dimming by line voltage devices may increase the Flicker percentage as the power levels are reduced. Hi-Pot Testing (Caution) All DirectAC Engine models are Hi-Pot tested on the Fulham production line. We advise NOT to apply AC Hi-voltage Dielectric test to LED products as this may damage the sensitive electronic components as well as the LEDs. Please inspect the connection wires for any nicks or cuts in the insulation during and after installation. Termination Notes A luminaire disconnect UL listed connector is included, as part of Fulham s retrofit kit only, to meet Energy Star requirements. Use solid wire size 8AWG/ per pole, rated at max 600V load and 05 C operating temperature. Strip wires to -3mm (0.47in.). L Connector not for multiple use. N For additional information on Wago's 873 Series Lumi-Nuts connector, please visit: http://www.wago.com/infomaterial/wago_ebook/56593/flipviewerxpress.html Daisy Chain Environmental Rating DirectAC Engines are rated for dry and damp locations. IC Over Temperature Control DirectAC Engine models have built in Thermal management, if the unit experiences higher than normal ambient temperatures the circuit by design will reduce the drive current to the LED there by reducing the thermal impact on the LED's. Fastening to Luminaire When installing by mounting thru holes (recommended), use any screw with diameter less than 0.3in. [3.4mm]. Mount on a flat surface and use all 3 mounting holes to ensure good contact between back side of Engine and mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #5 or M3 Pan Head screw. Electrostatic Sensitive Product (ESD) Fulham LED products should be handled with proper measures to protect against any potential ESD damage. When servicing, personnel should be ground and direct contact with LED should be avoided. Thermal Management Proper thermal management should be employed to ensure life and reliability of product. Wiring Intended for 0V application ONLY. Connect the Black wire from the DirectAC Engine to the building Line by using the proper connectors or wire nuts. Connect the White wire from the DirectAC Engine to the building/source Neutral by using the proper connectors or wire nuts. DirectAC Engine does not need grounded, but the luminaire must be grounded. Page 7 of
Color and Binning Optical Spectrum CIE Y 0.45 0.44 0.43 0.4 0.4 0.40 0.39 0.38 0.37 7 SCDM Rectangle 0.36 0.35 4 SCDM Rectangle 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.4 0.4 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 Relative Spectral Power Distribution.0000 0.8000 0.6000 0.4000 0.000 700K 3000K 4000K 5000K 6500K 0.0000 400 450 500 550 600 650 700 750 800 Wavelength[nm] NOTES: ) The Color and Binning and Optical Spectrum charts are for reference only. For more detailed info, contact factory. ) Reference Bridgelux Chromaticity Diagram for Color and Binning. Binning per ANSI C78.377-0 @ 5 C; 4 SDCM. 3) The Optical Spectrum values vary depending on product type and color rank. Page 8 of
Compatible Tested Dimmers (Contact Fulham for other alternatives) (TRIAC or ELV Dimmers) Manufacture Leviton Lutron Lutron Leviton Lutron Leviton Lutron Model ILLUMATECH IPL06 NOVA T NTLV-600 SLYLARK S-600 IG40O5 663 LUMEA LG-600P VPE06 SELV-303P Type TRIAC (Leading Edge) TRIAC (Leading Edge) TRIAC (Leading Edge) TRIAC (Leading Edge) TRIAC (Leading Edge) (ELV) Trailing Edge (ELV) Trailing Edge Page 9 of
DirectAC Engine Equivalency Chart Engine/Kit Part Number TJT003AC8xxB TJT003AC8xxC DirectAC Engine/Kit (3W) System Wattage 3W Lumen Output 470 lm (4K/80CRI) Efficacy 07 lm/w CFL Style Quad Triple Circline T9 Lamp Wattage 3W 8W 3W 8W 3W 4W 3W # of Lamps Total Wattage 3 39W 36W 3 39W 36W CFL 3W 4W 3W Lumen Output 475 lm 50 lm 535 lm 040 lm 040 lm 70 lm 500 lm Efficacy 59 lm/w 59 lm/w 56 lm/w 63 lm/w 64 lm/w 46 lm/w 40W 40W 975 lm 49 lm/w NOTES: ) For reference only, several factors apply. ) Emergency systems are not UL classified for field installation. Page 0 of
Flicker Test Data Summary (Test performed by third party lab using, Lutron Skylark S-600-WH dimmer) With Dimmer at 00% 00% Light Output Percent Amplitude Modulation No Filter 40 Hz 90 Hz 00 Hz 400 Hz 000 Hz 4.7% 0.34% 0.9% 3.4% 3.78% 4.04% Measurement Period:,000 sec Recording Interval: 4.00E-05 sec Noise: 3.8 dba Fraction of rated light output: 00% Flicker Index: 0.0409 With Dimmer at 0% 0% Light Output Percent Amplitude Modulation No Filter 40 Hz 90 Hz 00 Hz 400 Hz 000 Hz 3.6%.8% 3.65%.%.86% 3.6% Measurement Period:,000 sec Recording Interval: 4.00E-05 sec Noise:.8 dba Fraction of rated light output: % Flicker Index: 0.0305 With Dimmer at Minimum Light Output Minimum Light Output Percent Amplitude Modulation No Filter 40 Hz 90 Hz 00 Hz 400 Hz 000 Hz 0.73% 0.7%.73% 9.7% 9.70% 9.93% Measurement Period:,000 sec Recording Interval: 4.00E-05 sec Noise:. dba Fraction of rated light output: 0% Flicker Index: 0.03 No Dimmer Light Output Percent Amplitude Modulation No Filter 40 Hz 90 Hz 00 Hz 400 Hz 000 Hz 3.3% 0.9% 0.9%.57%.7%.8% Measurement Period:,000 sec Page of