PRODUCT INFORMATION Haldex solutions for tractors and agricultural trailers Innovative Vehicle Solutions
Coupling head Protect-O Red coupling head with filter Protect-O Yellow coupling head with filter Relay emergency S-TCV Solenoid trailer control ELR Emergency line restrictor Unloader SDX Single air drier Air tank Pneumatic trailer control Automatic drain
EB+ Gen3 Electronic braking system for trailers ABS MODAL Height sensor Toolbox for EB+ Gen3 Load sensing Blue Seal Double diaphragm spring brake AA1, S-ABA Automatic brake adjusters Service brake chamber
SDX Single air drier Single air drier that removes moisture and contaminants from compressed air. Patented, high-performance air drier cartridge Significantly longer service intervals With or without pressure regulator With or without heating Unloader Pressure regulator that controls pressure in pneumatic braking system. Adjustable cutoff pressure and operating range Available with or without tyre inflation port CREATING VALUE ELR Emergency line restrictor The tractor ELR ensures emergency trailer braking if the pneumatic system fails. Fulfils EU regulation 2015/68 in the event of trailer braking system failure Ideal in combination with Haldex S-TCV Compatible with other hydraulic trailer control s Compact design S-TCV Solenoid trailer control Modular trailer control for vehicles with hydraulic braking system. Integrated solenoid activates trailer brake through tractor parking brake Integrated solenoid, in-shot for shorter response time Integrated functions and easy installation for substantial cost savings Complies with EU regulation 2015/68 Automatic drain Drain to purge air tanks. Automatically empties any water that has been collected in the tank
EB+ Gen3 Electronic braking system for trailers The third generation EB+ takes into account the growing number of wide-ranging systems that communicate with the EBS. Accommodates operational systems of 8 to 32 volts Accommodates multiple auxiliary CAN devices Compatible with mechanical, hydraulic or pneumatic vehicle suspension Protect-O Coupling heads with filter Protect-O safeguards the trailer s pneumatic system from dust, insects and other contaminants even if the coupling head remains uncapped. Rubber diaphragm closes automatically when coupling head is uncoupled Designed for universal fit Integrated line filter CREATING VALUE Toolbox for EB+ Gen3 Height sensor Coupling head Readout and reset codes for stored errors Reads brake pad wear indicator Shows any recorded changes in system configuration Shows ECU flash history Shows system pressure, speed, voltage, etc. The height sensor allows mechanical suspension vehicles to be fitted with Haldex EB+. Provides EBS system benefits, e.g. greater safety and less braking system wear Corrects braking action according to load distribution even in harsh driving conditions Improves vehicle handling Single-line coupling head connects tractor and trailer braking systems. Integrated that automatically interrupts supply as soon as the line is disconnected Complies with current ISO 1728
Relay emergency Relay emergency controls trailer braking. Relay function for quick activation and deactivation of brake actuators Adjustable predominance Emergency braking when supply line is interrupted Pneumatic trailer control Pneumatic trailer control regulates trailer air brakes. Approved for agricultural trailers up to 25 km/h Load sensing Load sensing automatically adjusts braking pressure in accordance with trailer load. Available with mechanical or pneumatic control Available with or without shock absorbers (mechanical version) CREATING VALUE One and two line versions With or without predominance With or without release With or without manual lightladen Air tank Air tank stores compressed air produced by the compressor. In accordance with standard EN 286-2 Available in various lengths and diameters ABS MODAL A complete system for various trailer configurations. Available as 2S/2M, 4S/2M, 4S/3M or 6S/3M system Available for 12-volt or 24-volt installation 24-volt system in accordance with ISO 7638, ISO 3731 or ISO 1185 12-volt system in accordance with ISO 1724 or DIN 72570 In accordance with regulations ECE R13 and EU 2015/68
Blue Seal Double diaphragm spring brake actuators for S-cam brakes Blue Seal is a combined actuator for service braking and parking. Equipped with fabric-reinforced reliable service diaphragm Long service life due to powder-coated casing and spring resists corrosion from road de-icing chemicals Robust housing withstands vibration from rough roads Prevents air leakage between service and spring sides due to two longlasting O-rings and plastic bearings Available in four sizes: 16/24, 20/30, 24/30 and 30/30, all in longstroke version (75/75 mm) Service brake chamber Diaphragm actuators for S-cam brakes Equipped with fabricreinforced reliable diaphragm. Available with various yokes Available with various pushrod lengths Available in seven sizes: 9, 12, 16, 20, 24, 30 and 36 CREATING VALUE AA1, S-ABA Automatic brake adjusters Based on the clearance principle developed by Haldex, today s global standard. Available in two variants: AA1 and S-ABA. AA1 brake adjuster with fixed control arm Self-setting S-ABA for freechoice positioning of control arm and error-free installation Quick and easy to install Self-setting: no time-consuming adjustments during installation to achieve correct clearance Unmatched efficiency and durability
Haldex develops and provides reliable and innovative solutions focused on brake and air suspension products to the global commercial vehicle industry. In 2016, the company had net sales of approximately 4.4 billion SEK and employed a workforce of 2,100 people. Austria Haldex Wien Ges.m.b.H. Vienna Tel.: +43 1 8 69 27 97 Fax: +43 1 8 69 27 97 27 E-Mail: info.at@haldex.com Belgium Haldex N.V. Balegem Tel.: +32 9 363 90 00 Fax: +32 9 363 90 09 E-Mail: info.be@haldex.com Brazil Haldex do Brasil Ind. E Com. Ltda São José dos Campos Tel.: +55 12 3935 4000 Fax: +55 12 3935 4018 E-Mail: info.brasil@haldex.com Canada Haldex Ltd Cambridge, Ontario Tel.: +1 519 621 6722 Fax: +1 519 621 3924 China Haldex Vehicle Products Co. Ltd. Suzhou Tel.: +86 512 8885 5301 Fax: +86 512 8765 6066 E-Mail: info.cn@haldex.com France Haldex Europe SAS Weyersheim Tel.: +33 3 88 68 22 00 Fax: +33 3 88 68 22 09 E-Mail: info.eur@haldex.com Germany Haldex Brake Products GmbH Heidelberg Tel.: +49 6 221 7030 Fax: +49 6 221 703400 E-Mail: info.de@haldex.com Hungary Haldex Hungary Kft Szentlörinckáta Tel.: +36 29 631 400 Fax: +36 29 631 401 E-Mail: info.hu.eu@haldex.com India Haldex India Limited Nashik Tel.: +91 253 6699501 Fax: +91 253 2380729 Korea Haldex Korea Ltd. Seoul Tel.: +82 2 2636 7545 Fax: +82 2 2636 7548 Mexico Haldex de Mexico S.A. De C.V. Monterrey Tel.: +52 81 8156 9500 Poland Haldex Sp. z.o.o. Praszka Tel.: +48 34 350 11 00 Fax: +48 34 350 11 11 E-Mail: info.pl@haldex.com Russia OOO Haldex RUS Moscow Tel.: +7 495 747 59 56 Fax: +7 495 786 39 70 E-Mail: info.ru@haldex.com Spain Haldex España S.A. Granollers Tel.: + 34 93 84 07 239 Fax: + 34 93 84 91 218 E-Mail: info.es@haldex.com Sweden Haldex Brake Products AB Landskrona Tel.: +46 418 47 60 00 Fax: +46 418 47 60 01 E-Mail: info.se@haldex.com United Kingdom Haldex Ltd. Newton Aycliffe Tel.: +44 1325 310 110 Fax: +44 1325 311 834 E-Mail: info.gbay@haldex.com Haldex Brake Products Ltd. MIRA Technology Park Tel.: +44 2476 400 300 E-Mail: info.gbre@haldex.com USA Haldex Brake Products Corp. Kansas City Tel.: +1 816 891 2470 Fax: +1 816 891 9447 E-Mail: info.us@haldex.com 2017, Haldex AB. This material may contain Haldex trademarks and third party trademarks, trade names, corporate logos, graphics and emblems which are the property of their respective companies. The contents of this document may not be copied, distributed, adapted or displayed for commercial purposes or otherwise without prior written consent from Haldex. Innovative Vehicle Solutions Italy Haldex Italia Srl. Biassono Tel.: +39 039 47 17 02 Fax: +39 039 27 54 309 E-Mail: info.it@haldex.com www.haldex.com 006 700 065_EN/10.2017/Haldex EUR