Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135 Min. Burst Pressure (bar / PSI) 1100 / 1595 1900 / 7557 850 / 138 1900 / 7557 Testing Pressure (bar / PSI) 600 / 870 950 / 13778 570 / 867 950 / 13779 at 0 C / 3 F 88 / 7077 768 / 11138 63 / 6715 768 / 11139 at 30 C / 86 F 0 / 6381 693 / 10051 18 / 6063 693 / 10051 Pressure Rating in bar / PSI at 50 C / 1 F (bar / PSI) 00 / 5801 630 / 9137 380 / 5511 630 / 9137 at Indicated Temperature at 80 C / 176 F 3 / 989 5 / 7861 37 / 73 5 / 7861 at 100 C / 1 F 308 / 67 85 / 703 93 / 50 85 / 703 Working Temperature ( C / F) -35 C... +100 C / -31 F... +1 F (momentary +10 C / +8 F) Inside Diameter (mm / in) /.08 /.16 Outside Diameter (mm / in) 5 /.0 8,6 /.3 Bending Radius at working pressure 0 /.79 0 / 1.57 (mm / in) at -0 C / F 30 / 1.18 60 /.36 Max. Coil ength (m / ft) 100 / 38 Weight / m (g / oz) 16 /.50 / 1.35 Inner / Outer Tube PA Reinforcement Synthetic Fibre Stard hose end material is Steel 11 S Mn Pb 30 (1.0718), zinc/ nickel-plated (Type 15: Steel, black zinc/nickel-plated) Stainless Steel: VA (1.305/AISI 303), VA (1.571/AISI 316Ti) on request Stard Hose STAUFF-Test 0/0 STAUFF-Test 15/15 STAUFF-Test 1/1* STAUFF-Test 10/10 auge Adaptor Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) S1,65 x 1,5 M16 M16 x 1,5 * Special thread: buttress thread S1,65 x 1,5 1 / Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 630 bar / 9137 PSI Burst Pressure: 1900 bar / 7557 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % auge adaptor 1/ NPT, 1/ 1/ NPT on request auge adaptor available for all STAUFF-Test series B36 Dimensional drawings: All dimensions in mm (in).
Working Pressure up to 630 bar / 9135 PSI SMS / SS + Test Hoses Order Code STAUFF Test Hose SMS * 1 0 / M.... 119 B C6F Hose End 1 (see pages B38 - B3) Hose End (see pages B38 - B3) ength / Material Hose End 0 A.... J.... only specify when ength in A = 00 bar / 580 PSI Stard hose end material is Steel 15 S.... D.... different hose ends mm B* = 630 bar / 9137 PSI 1 K.... B.... are required (see above) C* 3 = 30 bar / 931 PSI 10.... U.... Stard engths see table below. D* 3 = 630 bar / 9137 PSI M........ P.... N.... F.... etc. W.... C.... * 1 for gaseous media type SS - Test hoses are perforated * Stard test hose option for North America is version B. * 3 Type C D - are perforated 11 S Mn Pb 30 (1.0718), zinc/nickel-plated = C6F Type 15: Steel, black zinc/nickel-plated = C6F Stainless Steel: VA (1.305/AISI 303), VA (1.571/AISI 316Ti) on request STAUFF B Test Stard ength * in mm in in 305 1 610 915 36 119 8 15 60 189 7 38 96 308 10 6096 0 Bending protection on request. Order Code HE 0 B C6F Hose End (see pages B38 - B3) / Material Hose End 0 A.... J.... A = 00 bar / 580 PSI Stard hose end material is Steel 15 S.... D.... B = 630 bar / 9137 PSI 11 S Mn Pb 30 (1.0718), zinc/nickel-plated = C6F 1 K.... B.... C = 30 bar / 931 PSI Type 15: Steel, black zinc/nickel-plated = C6F 10.... U.... D = 630 bar / 9137 PSI Stainless Steel: M........ P.... VA (1.305/AISI 303), N.... F.... etc. VA (1.571/AISI 316Ti) on request W.... C.... B37
Test Ends / Order Codes Hose End Description Type STAUFF-Test Screw-type suitable for test points 0 M16 x 15 M16 x 1,5 1 S1,6 x 1,5 STAUFF-Test Screw-type 0 M16 x suitable for test points -0 O 15 M16 x 1,5 1 S1,6 x 1,5 SW STAUFF-Test Screw-type suitable for test points 0 M16 x (short wire version) OX 15 M16 x 1,5 17.67 1 S1,6 x 1,5 STAUFF-Test Plug in-type 10 Plug in system auge adaptor BSP-thread for 3/8, 1/, M1 x 1,5 M0 x 1,5 swivel nut like type N 1/ 1/ 19.75 1/ 1/ 7 1.06 M 3/8 3/8.87 1 M1 x 1,5 19.75 0 M0 x 1,5 7 1.06 B38
/ Order Codes Hose Ends Hose End Description Type gauge adaptor BSP-thread for 1/ swivel nut like type N W 1/ 1/ 19.75 SW auge adaptor NPT-thread 1/ 1/ 7 1.06 STAUFF B Test for 1/ NPT swivel nut like type M 1/ 1/ NPT 19.75 N 1/ 1/ NPT 7 1.06 gauge adaptor NPT-thread for 1/ NPT swivel nut like type N A 1/ 1/ NPT 19.75 SW 1/ 1/ NPT 7 1.06 Stpipe for compression ring fittings ISO 83-1 / DIN 353 6 6-6 S Ød (see ) 0 (.79) Note: Stpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or. S 8 8-8 S 10 10-10 S 1 1-1 S 1/ 1/ Stpipe for compression ring fittings ISO 83-1 / DIN 353 6 6-6 S Ød (see ) Note: Stpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or. S 8 8-8 S Dimensional drawings: All dimensions in mm (in). B39
Test Ends / Order Codes Hose End Description Type Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 6 M1 x 1,5 1.55 8 M1 x 1,5 17.67 10 M16 x 1,5 19.75 K 1 M18 x 1,5.87 6 S M1 x 1,5 17.67 8 S M16 x 1,5 19.75 10 S M18 x 1,5.87 1 S M0 x 1,5.9 Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 5 elbow R 6 M1 x 1,5 1.55 6 S M1 x 1,5 1.67 SW Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 6 M1 x 1,5 1.55 8 M1 x 1,5 17.67 10 M16 x 1,5 19.75 6 S M1 x 1,5 17.67 8 S M16 x 1,5 19.75 10 S M18 x 1,5.9 Male thread DIN 385-B 1 M1 x 1,5 17.67 1/8 1/8 1.55 1/ 1/ 19.75 1/ 1/ 7 1.06 Male thread NPT ANSI-stard 1/8 1/8 NPT 13.51 F 1/ 1/ NPT 17.67 B0
/ Order Codes Hose Ends Hose End Description Type Male thread for cone fitting ISO 83-1 / DIN 353 6 M1 x 1,5 1.55 C 8 M1 x 1,5 17.67 6S M1 x 1,5 17.67 Male thread SAE J 51 8 S M16 x 1,5 17.67 1/ 7/16 0 UNF 1.55 STAUFF B Test J 5/16 1/ 0 UNF 1.55 3/8 9/16 18 UNF 17.67 Universal sealing head with swivel nut for cone fitting ISO 83-1 / DIN 353 6 M1 x 1,5 1.55 8 M1 x 1,5 17.67 10 M16 x 1,5 19.75 D 1 M18 x 1,5.87 6 S M1 x 1,5 17.67 8 S M16 x 1,5 19.75 10 S M18 x 1,5.87 1 S M0 x 1,5.9 Universal sealing head with swivel nut for cone fitting ISO 83-1 / DIN 353 Q 10 M16 x 1,5 19.75 10 S M18 x 1,5.87 swivel nut for cone fitting DIN EN 560 1/8 1/8 1.7 B 1/ 1/ 17.67 B1
Test Ends / Order Codes Hose End Description Type swivel nut SAE J 51 37 cone 1/ 7/16 0 UNF 1.55 37 U 5/16 1/ 0 UNF 17.67 3/8 9/16 18 UNF 19.75 swivel nut SAE J 516 5 cone 5 UR 1/ 7/16 0 UNF 1.55 swivel nut SAE J 516 37 cone E 1/ 7/16 0 UNF 1.55 37 swivel nut SAE J 516 5 cone ER 1/ 7/16 0 UNF 1.55 5 Test hose for air brake systems P M16 x 1,5 19.75 B
/ Order Codes Hose Ends Hose End Description Type swivel nut 60 cone H 1/ 1/ 17.67 Screw-type ORFS SAE J 153 9/16 9/16 18 UNF 17.67 STAUFF B Test T 11/16 11/16 16 UN 1.83 Screw-type ORFS SAE J 153 V 11/16 11/16 16 UN 1.83 Hose end with integrated check valve 0 M16 x RV 15 M16 x 1,5 B3
Special Adaptors / Order Codes Hose Connector SSV l l1 Sealings Internal sealings made of FPM (Viton ). Metal Parts Stard material: Steel, zinc/nickel-plated = C6F (CrVI-free) Stard material SSV15: Steel, black zinc/nickel-plated = C6F (CrVI-free) For ordering VA (1.305 / AISI 303) replace "C6F" with "VA". For ordering VA (1.571 / AISI 316Ti) replace "C6F" with "VA". Thread Order Codes l1 l M16 x,5 18,5 17 1.67.73.67 SSV0-C6F M16 x 1,5,5 18,5 17 1.67.73.67 SSV15-C6F S1,65 x 1,5 31 1,5 1 1..9.55 SSV1-C6F Sampling Hose Adaptor SHA 1 l1 ØD Ød l3 3 STA Ød1 ØD1 l Metal Parts Stard material: Steel, zinc/nickel-plated = C6F (CrVI-free) Ød1 Ød l1 l l3 5,5 13 3 18.87..51.91.9.71 Order Code SHA0-5.5MM-C6F B
STAUFF Test eneral Technical Information Port Connections Sealing Details Type A d1 30 Type A - Threaded port factory stard Sealing: O-ring Type A Thread M8 x 1 M10 x 1 d1 +0,1 t1 min. t min 9,5 11 15,5.37.3.61 11,5 1 16,5.5.7.6 t t1 0,5,5 Type B C Type B 0,1A A d1 Type C a t1 t Type B C - Threaded port type X acc. to DIN 385 Part 1 ; ISO 997-1 (metric); ISO 1179-1 (inch) Sealing: Metal joint Type B / Elastomeric sealing Type C Thread d1 min. t1 min. t min. a max. M10 x 1 15 8 10 1.59.31.39.0 M1 x 1,5 18 1 15 1,5.71.7.59.06 M1 x 1,5 0 1 15 1,5.79.7.59.06 M16 x 1,5 3 1 15 1,5.91.7.59.06 M18 x 1,5 5 1 15.98.7.59.08 M0 x 1,5 7 1 17 1.06.55.67.08 M x 1,5 8 1 17,5 1.10.55.67.10 1/8 15 8,5 10,5 1.59.33.1.0 1/ 0 1,5 15,5 1,5.79.9.61.06 3/8 3 1,5 15,5.91.9.61.08 1/ 8 1,5 18,5,5 1.10.57.73.10 Type D Type D - Parallel threaded port type Z DIN 385 Part (inch) Sealing: Taper Type D suitable sealant required Thread 90 t1 t t1 min. t min. Rp1/8 5,5 9,5..37 Rp1/ 8,5 13,5.33.53 Rp3/8 8,5 13,5.33.53 Rp1/ 10,5 16,5.1.65 B6 Dimensional drawings: All dimensions in mm (in).
eneral Technical Information STAUFF Test Port Connections Sealing Details Type D Type D - Taper threaded port ANSI/ASME B1.0.1-1983 (NPT) Sealing: Taper Type D suitable sealant required Thread 90 t1 min. t min. 1/8 7 NPT 6,9 11,6.7.6 1/ 18 NPT 10 16,.39.65 1/ 1 NPT 13,6,6.5.89 t t1 Type E Type E - Threaded port ISO 619-1 (metric); ISO 1196-1 (UNF) Sealing: O-ring Type E Thread STAUFF B Test A 0, A 0,1 A d d1 z b a t1 t d1 +0,1 d min. t1 min. t min. a +0, b max. z ±1 M10 x 1 11,1 16 10 11,5 1,6 1..63.39.5.06.0 1 M1 x 1,5 13,8 19 11,5 1, 1,5.5.75.5.55.09.06 M1 x 1,5 15,8 1 11,5 1, 1,5.6.83.5.55.09.06 M16 x 1,5 17,8 13 15,5, 1,5.70.9.51.61.09.06 M x 1,5 3,8 9 15,5 18,.9 1.1.61.71.09.08 M7 x 9, 3 19 3,1 1.16 1.3.75.87.91.08 5/16 UNF 9,1 17 10 1 1,9 1,6.36.67.39.7.07.06 1 7/16 UNF 1, 1 11,5 1, 1,6.9.83.5.55.09.06 1 1/ 0 UNF 1 3 11,5 1, 1,6.55.91.5.55.09.06 1 9/16 18 UNF 15,65 5 1,7 15,5,5 1,6.6.98.50.61.10.06 1 7/8 1 UNF 3,95 3 16,7 0,5,.9 1.3.66.79.10.09 Dimensional drawings: All dimensions in mm (in). B7