LOW VOLTAGE ELECTRICAL COMPONENTS INTERPLAST COMPANY LIMITED Member of Group Harwal
CONTENTS PAGE MINIATURE CIRCUIT BREAKER 3 MCB ISOLATOR ELCB / RCCB 13 DISTRIBUTION SYSTEM 17 FLUORESCENT LUMINA IRES 20 LOW VOLTAGE ELECTRICAL COMPONENTS 1
Intuition... Innovation... Agility... The GROUP HARWAL s primary business is based on plastic & metal products, with over 0 years of experience in different processes and technologies. Plastic Compounds, Building Materials, Pipe Line Systems, Housing Systems, Shelters, Electrical Products, Household Items, Storage Containers, Garden Sheds, Plastic Disposables, Packaging Materials, Outdoor Products, Refrigeration, Residential & Contract Furniture are just some of the products manufactured by HARWAL under our wide spread manufacturing facilities in UAE, USA & CIS countries. With an annual conversion capacity of 200,000 metric tons of plastic and 20,000 tons of aluminium & steel, the Group has come to the forefront of their respective industries. The difference is...... to perceive, create & swiftly deliver INTERPLAST COMPANY LIMITED Member of Group Harwal Interplast Co. Ltd, a member of Group Harwal was established in 1981 to manufacture PVC compounds for the GCC market s. GROUP HARWAL S technological capabilities assisted INTERPLAST in rapidly becoming a leading manufacturer of PVC compounds, marketed under the trade name of IP-HARWAL. In 198 INTERPLAST diversified into the extrusion of DECODUCT Conduits and Trunkings for Electrical & Cable Management applications. This downstream operation was further strengthened in 1987 with introduction of DECODUCT injection moulding for PVC conduit & trunking fittings. Over the years INTERPLAST electrical products have gained the confidence and appreciation of its customers spread over GCC,AFRICA,ASIA and European Regions. To satisfy the ever-increasing demand of its products, INTERPLAST expanded into new and spacious factory premises in October 1988. In 1997 INTERPLAST launched the complete range of EDISON wiring accessories & over the years this range is expanded into one of the widest range of switches and sockets manufactured in UAE. 2 INTERPLAST is introducing DECOVOLT range of low voltage switchgears comprising of Miniature Circuit Breakers, MCB ISOLATORS, ELCB s, MCB Distribution System & Fluorescent fixtures. DECOVOLT range is OEM manufactured as per international standards IEC/EN 097-3 & 0898, where as the quality management system is certified to ISO9001 by ASTA U.K. DECOVOLT Products are CE marked declaring conformity to European standards and safety regulations.
MINIATURE CIRCUIT BREAKER Electrical distribution needs are continuously evolving in residentional, commercial and Industrial sectors. Improved operational safety, continuity of service, greater convenience and operating cost have assumed a tremendous significance. Miniature circuit breakers have been designed to continuously adapt to these changing needs. Range A to A "B" Curve 0.5A to A "C" Curve 0.5A to A for "DC" Application Execution Single Pole (1P) Single Pole & Neutral (1P+N) Double Pole (2P) Three Pole (3P) Three Pole & Neutral (3P+N) Four Pole (P) UNIFORM KA BREAKING CAPACITY FOR "B" AND "C" CURVE LOW POWER CONSUMPTION, THUS COST EFFECTIVE & ENERGY SAVING SUITABLE FOR DC AND FOR A WIDE FREQUENCY RANGE OF 50Hz-0Hz APPLICATION "FINGER SAFE" TERMINALS-IP20 DEGREE OF PROTECTION ARC CHUTE FOR EFFECTIVE ARC QUENCHING SILVER GRAPHITE CONTACTS FOR ENHANCED LIFE Specification IEC/EN 0898 Feature Precise hammer action 15 Plates Arc Chute for effective arc quenching Longer electrical life Wide range Value for money Low power consumption, thus cost effective & energy saving Accessories Auxiliary Switch Shunt trip 3
MINIATURE CIRCUIT BREAKER HOUSING: The housing of Decovolt MCB is Injection Moulded from special grade PBT as per international specifications. The housing and other moulded components are fire retardant, anti-tracking and non hygroscopic. The Housing can withstand high temperature and is impact resistant. CONTACTS: Contacts are made of special silver inlaid into copper strip, ensuring higher life and maximum safety against contact welding and erosion. These contacts have low contact resistance resulting into low watt loss. CURRENT LIMITING ACTION: The high speed current limiting action ensures that the MCB operate before the full prospective fault current is allowed to develop. Under fault conditions, damage can be sustained to the installation and associated equipment due to the amount of energy that passes before the current is completely interrupted. The total energy let through depends on the value of current and the time for which it flows. The high speed current limiting action of DECOVOLT MCB ensures that the energy let through and any subsequent damage is minimized. This reduced LET THROUGH ENERGY (Class 3 as per BSEN 0898) assists greatly with both backup and discrimination considerations. OPERATING MECHANISM: DECOVOLT MCB have a quick make and break trip free mechanism. In the event of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, the handle always indicates the correct contact position. Internal View of MCB Outgoing Terminal Body MODERATE OVERLOAD CONDITION: Detection of moderate Over load conditions is achieved by the use of a Bimetal Overload Relay, which deflects in response to the current passing through it The Bimetal Relay moves against the trip bar releasing the trip mechanism. Latch Arc-chutes Holder Solenoid Arc-chutes Arc-runner Arc-chutes Holder SHORT CIRCUIT CONDITIONS: When the current flowing through the MCB reaches a predetermined level, the solenoid in Magnetic coil directly pulls in the plunger, which releases the trip mechanism. Moving Contact Arm Fixed Contact Incoming Terminal (Dual Termination) PERFECT CONECTIONS: The design of terminals makes the wiring easier. A combination box type terminal with combination head screws on both sides with deep serrations ensures sparkles and firm connections.
MINIATURE CIRCUIT BREAKER TECHNICAL INFORMATION STANDARD CONFORMITY IEC 0898:2002 IEC 097-3:2001 TYPE/SERIES Nos of Poles (Execution) RATED SHORT CIRCUIT BREAKING CAPACITY Ka B RATED CURRENT (In) -* -* -* RATED VOLTAGE (AC) (Ue) 2/15 2/15 2/15 RATED FREQUENCY (f) 50 50 50 UTILIZATION CATEGORY MAGNETIC RELEASE SETTING RATED INSULATION VOLTAGE(Ui) RATED IMPULSE VOLTAGE (Uimp) ELECTRICAL / MECHANICAL ENDURANCE 1P,1P+N,2P,3P,3P+N,P C 1P,1P+N,2P,3P,3P+N,P B 1P,1P+N,2P,3P,3P+N,P (3-5) In (3-5) In (3-5) In 0 0 0 LESS THAN 32 Amps 20000 20000 20000 MORE THAN 32 Amps 000 000 000 AMBIENT TEMPERATURE - 5 to + 55-5 to + 55-5 to + 55 VIBERATION g 3 3 3 SHOCK MM FREE FALL MM FREE FALL MM FREE FALL PROTECTION CLASS IP 20 IP 20 IP 20 INSTALLATION POSITION MOUNTING TITLE TERMINAL CAPACITY (MAX) sq.mm CASE & COVER VERTICAL/ HORIZONTAL CLIP ON DIN RAIL MCB VERTICAL/ HORIZONTAL CLIP ON DIN RAIL ISOLATOR VERTICAL/ HORIZONTAL CLIP ON DIN RAIL MOULDED, FLAME RETARDANT THERMOPLASTIC MATERIAL * CURRENT RATINGS - 0.5, 1,2,3,,5,,8,,1,20,,32,,50, "B" CURVE MCB's ARE AVAILABLE ON REQUEST ** 1P SINGLE POLE 1P+N SINGLE POLE NEUTRAL 2P DOUBLE POLE 3P THREE POLE 3P+N THREE POLE NEUTRAL P FOUR POLE 5
MINIATURE CIRCUIT BREAKER SELECTION Fresh hold application APPLIANCES AIR CONDITIONER REFRIGATOR OVEN/GRILLER OVEN/GRILLER HOT PLATE ONLY ROOM HEATER WASHING MACHINE WASHING MACHINE WITH HEATER WATER HEATER STORAGE / INSTANT ELECTRIC IRON AUTO TOASTER ( 2 SLICES) ELECTRIC KETTLE CAPACITY/WATT (Load)(2V-1pH) 1.0 tonnes 1.5 tonnes 2.0 tonnes 15 litres 350 litres 500 W 1750 W 750W 2000W 00W 2000W 300W 1300W 00W 2000W 3000W 000W 750W W 1200W 1500W CURRENT RATING OF MCB A 1A 20A 3A A 32A A A A A A 2A 8A A A 1A 32A A 8A 8A A TYPE OF MCB "C" SERIES "C" SERIES "C" SERIES "C" SERIES "C" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "C" SERIES "C" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES "B" SERIES Lamp Watt No of lamps 20W 8 12 W 2 12 0W 1 8 12 80W 1 2 5 8 12 0W 1 2 Rating (A) 1 1.5 0.5 2 2.5 0.5 1.5 3 0.5 1 2 5 1 1.5 2.5 " B " series MCB is used for lighting applications SELECTION OF MCB FOR MOTOR PROTECTION 1 PHASE 230V DOL STARTING 3 PHASE 0V DOL STARTING 3 PHASE 0V ASSISTED STARTING STAR DELTA S.NO KW HP FULL LOAD CURRENT MCB SELECTION FULL LOAD CURRENT MCB SELECTION FULL LOAD CURRENT MCB SELECTION C C C D 1 0.18 0.2 2.8 0.9 2 - - - 2 0. 0.3 3.2 1.2 2 - - - 3 0.37 0.5 3.5 1.2 2 - - - 0.55 0.7.8 1 1.8 3 - - - 5 0.75 1.01.2 20 2 3 - - - 1.1 1.7 8.7 2. - - - 7 1.5 2.01 11.8 32 3.5 - - - 8 2.2 2.95 17.5 50. - - - 9 3.02 20.3 1.3 1 3.75 5.03 2 80 8.2 20 8.2 20 11 5.5 7.37 2 80 11.2 11.2 32 1 12 7.5.05 7 1 1. 1. 13 13. - - 21 50 21 50 32 1 15 20.11 - - 27 0 27 15 18.5 2.8 - - 32 1 32 50 1 22 29.9 - - 38 1 38 17 30.21 - - 51 1 51 NOTE: One lighting circuit can have up to 800W or up to lighting points One power circuit can have up to 2000W or 1 power point
MINIATURE CIRCUIT BREAKER TRIPPING CHARACTERSTICS CURVES Tripping Characterstics Curve Type B & C Tripping Characterstics Curve DC MCB Type B & C 000 5000 300 00 Lower Limit as per Standard Upper Limit as per Standard Limit Specified in IEC-0898-1-2002 In : Rated Current B Type - 0.5A to 0A C Type - 0.5A to 0A 000 5000 300 00 Lower Limit as per Standard Upper Limit as per Standard Limit Specified in IEC-0898-1-2002 In : Rated Current B Type - 0.5A to 0A C Type - 0.5A to 0A Reference Calibration Temp-30 C Reference Calibration Temp-30 C Time in Seconds 0 In > 32A In < 32A Time in Seconds 0 In > 32A In < 32A 1 1 B-Type B-Type C-Type C-Type 0.1 0.1 0.01 11.131.5 2 2.55 3 5 1 20 28 50 Multiple of Rated Current 0.01 11.131.5 2 2.55 3 5 1 20 28 50 Multiple of Rated Current Decovolt MCB Vs Zero Point Extinguishing MCB Temperature Compensation Graph U/V 0 50 Current Limiting MCB U/V U/V Ambient Temp. C 30 20 0 - Zero point Extinguishing MCB Un = Mains Voltage ID = Let - through short circuit current UB = Arc Voltage Ip = Prospective short circuit current 0.7 0. 0.9 1.0 1.1 1.2 1.3 1. Correction Factor Reference Calibration Temp. 30 C 7
MINIATURE CIRCUIT BREAKER SINGLE POLE SINGLE POLE - N DOUBLE POLE CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 "B CURVE" CAT NO DVBSP5 DVBSP01 DVBSP02 DVBSP03 DVBSP0 DVBSP05 DVBSP0 DVBSP DVBSP1 DVBSP20 DVBSP DVBSP32 DVBSP DVBSP50 DVBSP "B CURVE" CAT NO DVBDP5 DVBDP01 DVBDP02 DVBDP03 DVBDP0 DVBDP05 DVBDP0 DVBDP DVBDP1 DVBDP20 DVBDP DVBDP32 DVBDP DVBDP50 DVBDP "C" CURVE CAT NO DVCSP5 DVCSP01 DVCSP02 DVCSP03 DVCSP0 DVCSP05 DVCSP0 DVCSP DVCSP1 DVCSP20 DVCSP DVCSP32 DVCSP DVCSP50 DVCSP "C" CURVE CAT NO DVASP5 DVASP01 DVASP02 DVASP03 DVASP0 DVASP05 DVASP0 DVASP DVASP1 DVASP20 DVASP DVASP32 DVASP DVASP50 DVASP "C" CURVE CAT NO DVCDP5 DVCDP01 DVCDP02 DVCDP03 DVCDP0 DVCDP05 DVCDP0 DVCDP DVCDP1 DVCDP20 DVCDP DVCDP32 DVCDP DVCDP50 DVCDP 8
MINIATURE CIRCUIT BREAKER THREEE POLE THREEE POLE - N DOUBLE POLE CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 CURRENT RATING (A) 0.5 1 2 3 5 1 20 32 50 "B CURVE" CAT NO DVBTP5 DVBTP01 DVBTP02 DVBTP03 DVBTP0 DVBTP05 DVBTP0 DVBTP DVBTP1 DVBTP20 DVBTP DVBTP32 DVBTP DVBTP50 DVBTP "B CURVE" CAT NO DVBFP5 DVBFP01 DVBFP02 DVBFP03 DVBFP0 DVBFP05 DVBFP0 DVBFP DVBFP1 DVBFP20 DVBFP DVBFP32 DVBFP DVBFP50 DVBFP "C" CURVE CAT NO DVCTP5 DVCTP01 DVCTP02 DVCTP03 DVCTP0 DVCTP05 DVCTP0 DVCTP DVCTP1 DVCTP20 DVCTP DVCTP32 DVCTP DVCTP50 DVCTP "C" CURVE CAT NO DVATP5 DVATP01 DVATP02 DVATP03 DVATP0 DVATP05 DVATP0 DVATP DVATP1 DVATP20 DVATP DVATP32 DVATP DVATP50 DVATP "C" CURVE CAT NO DVCFP5 DVCFP01 DVCFP02 DVCFP03 DVCFP0 DVCFP05 DVCFP0 DVCFP DVCFP1 DVCFP20 DVCFP DVCFP32 DVCFP DVCFP50 DVCFP 9
DECOVOLT ISOLATOR They are switch disconnectors with independent manual operation, capable of making, carrying and breaking currents under normal circuit conditions, which may include operating overload condition and also carry currents under specified abnormal circuit conditions such as those of short circuit for a specified time. Range A, A, 80A, 0A Execution Single Pole (1P) Double Pole (2P) Three Pole (3P) Four Pole (P) Specification IEC 097-3 CONFORMING TO IEC - 097-3 LOW POWER CONSUMPTION, THUS COST EFFECTIVE & ENERGY SAVING LOW WATT LOSS COST AND ENERGY SAVING Feature low watt loss longer electrical life Wide Range Value for Money Low power consumption Cost effective and energy saving
DECOVOLT ISOLATOR DOUBLE POLE CURRENT RATING (A) 80 0 CAT NO DVISODP DVISODP DVISODP DVISODP80 DVISODP0 THREE POLE CURRENT RATING (A) 80 0 CAT NO DVISODP DVISODP DVISODP DVISODP80 DVISODP0 FOUR POLE CURRENT RATING (A) 80 0 CAT NO DVISODP DVISODP DVISODP DVISODP80 DVISODP0 11
DECOVOLT ISOLATOR TECHNICAL INFORMATION STANDARD CONFORMITY IEC 097-3:2001 TYPE/SERIES B RATED CURRENT (In) -* RATED VOLTAGE (AC) (Ue) 2/15 RATED FREQUENCY (f) 50 Nos of Poles (Execution) 1P,1P+N,2P,3P,3P+N,P RATED SHORT CIRCUIT BREAKING CAPACITY Ka UTILIZATION CATEGORY MAGNETIC RELEASE SETTING (3-5) In RATED INSULATION VOLTAGE(Ui) 0 RATED IMPULSE VOLTAGE (Uimp) ELECTRICAL / MECHANICAL ENDURANCE 000 AMBIENT TEMPERATURE - 5 to + 55 TERMINAL CAPACITY (MAX) sq.mm VIBERATION g 5 SHOCK mm FREE FALL PROTECTION CLASS IP 20 INSTALLATION POSITION VERTICAL/ HORIZONTAL MOUNTING CLIP ON DIN RAIL CASE & COVER MOULDED REINFORCED PLASTIC B.0 C 70.5 35.0 A E D A B C D E A SP SPN DP TP TPN FP MCB'S 70 2. 80 0 5 ISOLATORS 72.7 3 53.5 71.5 0 5 AUXILIARY CONTACT 70 17.5 0 5 12
DECOVOLT RCCB The flow of current through electrical facilities always involves risks. Poorly insulated equipment, faulty wires and incorrect use of an electrical device cause currents to flow through the wrong path (i.e through the insulation) to the earth. This current is called "leakage current". Earth leakage is an electrical hazard and is responsible for electrical shocks and fire risks. Earth leakage and its associated hazard can be prevented by residual current circuit breaker (RCCB), also popularly known as ELCB Range A-A Sensitivity 30mA, 0mA, 300mA IEC 08-1 / EN 08-1 Execution Double Pole (2P) Four Pole (P) LOW POWER CONSUMPTION, THUS COST EFFECTIVE & ENERGY SAVING Specification IEC 08-1 / EN 08-1 TEST BUTTON FOR REGULAR INSPECTION COST EFFECTIVE AND ENERGY SAVING Feature Simple and Robust operating mechanism Rotary handle with ON/OFF Indication Dual termination for Bus Bar as well as cable Connection Advance neutral Test Button for regular Inspection Positive contact indication 13
DECOVOLT RCCB DOUBLE POLE CURRENT RATING (A) 32 32 32 SENSITIVITY (ma) 30 0 300 30 0 300 30 0 300 30 0 300 CAT NO DVELDP030 DVELDP00 DVELDP0300 DVELDP32030 DVELDP3200 DVELDP320300 DVELDP030 DVELDP00 DVELDP0300 DVELDP030 DVELDP00 DVELDP0300 FOUR POLE CURRENT RATING (A) 32 32 32 SENSITIVITY (ma) 30 0 300 30 0 300 30 0 300 30 0 300 CAT NO DVELFP030 DVELFP00 DVELFP0300 DVELFP32030 DVELFP3200 DVELFP320300 DVELFP030 DVELFP00 DVELFP0300 DVELFP030 DVELFP00 DVELFP0300 1
DECOVOLT RCCB PROTECTION AGAINST ELECTROCUTION The used of exposed, substandard, badly wired, wrongly connected or damaged equipment as well as frayed or badly repaired cables reduces the safety of an installation and increases the risk of person receiving an electric shock. Electrocution is a passage of current through human body, which is dangerous. The flow of current through human body effects vital functions. BREATHING HEARTBEAT A correctly chosen RCCB can detect small currents flowing to earth and reduces the risk of electrocution. However electrocution should not be viewed in terms of contact voltage. A person gets electrocuted by coming in contact with an object that has a different potential from his/her own. The difference in potential causes the current to flow through the body. AGAINST INDIRECT CURRENT Over current protection devices like MCB are unable to act promptly on small earth leakage currents. To comply with wiring regulations, the earth fault loop impedance in Ohms, multiplied by the rated tripping current of the RCD in amperes must not exceed 50. Example For and RCD with a rated tripping current of 30mA, the maximum permission earth fault loop impedance is calculated as follows. Zs (max) = 50 /In = 50/0.03 = 1. Rated Tripping Current of the RCD ma 30mA 0mA 300mA Maximum permissible earth fault loop impedance in 5000 1 50 1 TECHNICAL INFORMATION STANDARD CONFORMITY RATED CURRENT (In) SENSITIVITY RATED VOLTAGE RATED INSULATION VOLTAGE(Ui) RATED FREQUENCY Hz SHORT CIRCUIT WITHSTAND CAPACITY (ka) RESIDUAL MAKING BREAKING CAPACITY A AMBIENT TEMPERATURE SHOCK RESISTANCE VIBERATION RESISTANCE g ELECTRICAL/MECHANICAL OPERATIONS MOUNTING DEGREE OF PROTECTION TERMINAL CAPACITY (MAX) sq.mm TWO POLE IEC 08-1,32,, 30-0 - 300 2 0 50 500A OR In whichever is greater - TO + 55 MM FREE FALL 3 000 DIN RAIL (35 X 7.5)MM IP 20 IEC 097-3:2001 IEC 08-1,32,, 30-0 - 300 15 0 50 500A OR In whichever is greater - TO + 55 MM FREE FALL 3 000 DIN RAIL (35 X 7.5)MM IP 20 15
DECOVOLT RCCB Tripping Characteristics (IEC/EN 08) Tripping characteristics, tripping time range an d selectivity of istantaneous, surge current-proof residual current circuit breaker. I n3 = 30 ma 00 (ms) 500 300 0 300 150 Tripping time range limit values Tripping time range non-delayed Area of unwanted tripping Tripping time t 1 15 30 I 50 0 150 200 500 00 (ma) 500 A) Residual tripping current I n I n1... 2I n1... 5I n1... n2... 2I n2... 5I n2... conditionally surge currentproof Series connection of main RCCB and circuit RCCB's recommended by the installation rules set forth in ÖVE/ÖNORM E 8001-1, is compulsory for agricultural installations according to 5 of ÖVE-EN1, Part. The device is ok if the result of measurement is within the time range specified by the manufacturer of the measuring instrument. Connection Diagrams 2-Pole -Pole Residual Current Circuit Breaker - General Data Short description of the most important RCCB types: Symbol Description Standard. Suitable for outdoor installation (distribution boxes for outdoor installation and building sites) up to -ºC. Conditionally surge-current proof (>0 A, 8/20 µs) for general application. Press service key when putting the device into operation, and subsequently approximately once per year. Pressing the key once per month is not required any more and can be omitted unless shorter testing intervals are required under any applicable regulations (e.g. on building sites). 1
DECOVOLT DISTRIBUTION BOARD Electrical energy has brought along with it a lot of conveniences, beyond imagination. It's consumption has increased manifold be it in domestic, commercial or industrial applications, there by creating a need for scientific & effective method of distribution. The purpose of electrical wiring is to systematically distribute current. In the process the system adopts methods to product hazards such as short circuit, over load and earth leakage AESTHETICALLY SUPERIOR DB's TO SUIT THE STYLE OFF YOUR HOME DÉCOR CHOICE OF MULTIPLE INCOMER MCB, ISOLATOR, MCB+RCCB, CHANGEOVER + RCCB, ISOLATOR + RCCB +TPN RCBO READY TO USE DB'S THAT ARE SUPPLIED WITH NEUTRAL LINKS, EARTH LINKS, BUS BAR AND INTERNAL CONNECTING WIRES BUS BAR RATING - 0/200A COMPLETE RANGE OF DB'S WITH DETACHABLE GLAND PLATES AT THE TOP AND BOTTOM WITH KNOCKOUTS ON THE SIDES OF DB TO INCREASE THE FLEXIBILITY OF CABLES / CONDUIT ENTRY FROM ALL DIRECTIONS The electrical wiring is carried out to distribute current from a single source of supply to various circuits, such an arrangement is made inside an enclosure called Distribution board The distribution board is not merely an enclosure but a comprehensive system in itself, comprising of copper busbars, brass neutral links, earth links to facilitate effective distribution of current, It incorporates safety devices such as MCB's, ELCB's and Isolators, which serves to protect the installation. A wide range of compact, elegant & economical DB's with unique features, designed & engineered to provide user safety, convenience and operational/ maintenance advantages are offered Range Single Phase Three Phase Single Door Double Door 17
DECOVOLT DISTRIBUTION BOARD MCB DISTRIBUTION BOARD Decovolt distribution system in sheet steel enclosures is fabricated with utmost precision. Compact designs have been developed to ensure convenience and ease of installation and operation; they favorably match with the national and international technology. CONSTRUCTION The enclosures are fabricated out of best quality CRCA steel sheet for better strength and finish. The distribution systems are supplied duly fitted with Din channel, neutral link earth bar and bus bar, so that the MCB s of desired number of ratings can be fitted conveniently at site, except for one to four pole enclosures, which are only fitted with Din channel. POWDER PAINT High quality powder paint coated and baked at high temperature, before powder coating the housing go through anti-rust conditioning in seven tank processes to ensure smooth and lasting finish and protection against corrosive atmosphere. All type of DB s are available in single and two tone colour. Decovolt elegant distribution systems are designed with the best combination of engineering technology and aesthetic to suit various applications. All DB s available with and without MCB s DOUBLE DOOR SP & N DISTRIBUTION Single Phase and neutral sheet steel powder coated double door distribution system fitted with two cover one screwed cover for incoming and outgoing for MCB and second for protection of MCB s, fitted with bus bar, neutral link, earth bar, and din rail, Suitable for use on 2/15Vv, 50 Hz supply. NO OF WAYS AND DIMENSION DETAILS WAYS CAT NO TO ACCOMMODATE DVDD0 Nos. SP MCB DVDD0 Nos. SP MCB 8 DVDD08 8 Nos. SP MCB 12 DVDD012 12 Nos. SP MCB 1 DVDD01 1 Nos. SP MCB D F C WAYS A B C D E F G 170 2 8 1 2 90 10 B G E 205 2 8 175 2 1 10 8 2 2 8 2 2 10 10 12 3 2 8 280 2 230 10 A 1 380 2 8 350 2 300 10 18
DECOVOLT DISTRIBUTION BOARD CONSUMER UNIT WITH POLYCARBONATE COVER Single phase and neutral sheet steel powder coated distribution system with poly carbonate transparent cover for protection of MCB s fitted with /A DP Isolator or ELCB as incomer and fitted with bus bar, neutral link, earth bar and din rail. Suitable for use on 2/15V, 50 Hz. NO OF WAYS AND DIMENSION DETAILS WAYS CAT NO TO ACCOMMODATE DVCUDD0 Nos. SP MCB DVCUDD0 Nos. SP MCB 8 DVCUDD08 8 Nos. SP MCB 12 DVCUDD012 12 Nos. SP MCB D 1 DVCUDD01 1 Nos. SP MCB F C WAYS A 22 B 22 C D 2 E 2 F 10 G 10 B G E 9 22 25 2 195 10 8 29 22 280 2 230 10 A 12 329 22 315 2 25 10 1 3 22 350 2 300 10 VERTICAL DOUBLE DOOR TP & N DISTRIBUTION SYSTEM FITTED WITH FP ISOLATOR Three phase and neutral sheet steel powder coated distribution system for single/multi phase out going fitted with colour coated bus bar, neutral link, Earth bar, and din rail. Suitable for use on 2/15v, 50 Hz supply. DB is provided with detachable gland plates NO OF WAYS AND DIMENSION DETAILS WAYS CAT NO TO ACCOMMODATE D F 8 DVCUDD0 DVCUDD08 Nos. SP MCB 8 Nos. SP MCB 12 DVCUDD012 12 Nos. SP MCB A C WAYS A B C D E F G B G E 170 2 8 1 2 90 10 8 205 2 8 175 2 1 10 12 2 2 8 2 2 10 10 19
DECOVOLT FLUORESCENT LUMINARIES DECOVOLT RECESSED AND SURFACE MOUNTED LUMINARIES ARE SUITABLE FOR GENERAL LIGHT- ING, APPLICATIONS IN INDOOR AREAS SUCH AS OFFICES, COMPUTER ROOMS, SCHOOLS, HOSPI- TALS AND COMMERCIAL AREAS SUCH AS SHOPS DECOVOLT WEATHER PROOF LUMINARIES ARE SUITABLE FOR DAMP/DUSTY ENVIRONMENTS SUCH AS INDUSTRIAL PREMISES, FACTORIES, POWER PLANTS, POWER DISTRIBUTION STATIONS, WAREHOUSES CAR PARKS. MATERIAL FINISH CHASSIS OF RECESSED AND SURFACE MOUNTED FIXTURES ARE MADE OF CRCA SHEET STEEL, CHEMICALLY CLEANED, TREATED PHOSPHATED & POWDER COATED WITH RAL 90 ON BOTH SIDES, TO GIVE HIGH REFLEC- TIVE SURFACE FINISH DECOVOLT WETHER PROOF HOUSING MADE OF COMPRESSION MOULDING GLASS REINFORCED POLYESTER (GRP), DIFFUSER UV STABILIZED PMMA / POLYCARBONATE, TRAY PRETREATED WHITE POWDER COATED CRCA SHEET STEEL END CAPS ARE MOULDED POLYAMIDE, IT ALLOWS EASY ASSEMBLY OF LAMP HOLDERS DECOVOLT FLUORESCENT BATTENS ARE SUITABLE FOR T8 AND T5 FLUORESCENT LAMPS, AVAILABLE IN SINGLE, DOUBLE AND TRIPLE TUBE VERSIONS DECOVOLT MODULAR RECESSED AND SURFACE FLUORESCENT LUMINARIES ARE SUITABLE FOR T5 AND T8 FLUORESCENT LAMPS AVAILABLE IN IP-20 AND IP - RATINGS DECOVOLT WEATHER PROOF LUMINARIE SUITABLE FOR SINGLE OR TWIN T5 OR T8 LAMPS OPERATED BY HF OR ELECTROMAGNETIC BALLAST, AVAILABLE IN IP-5 PROTECTION GASKETS ARE MOULEDE POLYURETHANE RUBBER WHICH PROVIDES FOR IP-5 BALLASTS ARE ENERGY EFFICIENT WITH LOW ENERGY LOSS, NOISELESS OPERATIONS, LOW OPERATING TEMPERATURE, AND MINIMUM TEMPERATURE RISE, ELECTRONIC BALLAST OPTIONAL LAMP HOLDERS ARE WITH G5 AND G13 BASE AND BODY, MADE OF FLAME RETARDANT POLY CARBONATE PLASTIC AND PHOSPHER BRONZE CONTACT STARTER HOLDER ARE MADE OFF LAME RETAR- DANT POLYCARBONATE PLASTIC WITH PHOS- PHER BRONZE CONTACT LOCKING CLIPS ARE MADE OF POLYCARBONATE / STAINLESS STEEL INTERNAL WIRING WITH PVC INSULATED HEAT RESISTANT SINGLE STRAND COPPER WIRE. 20
DECOVOLT FLUORESCENT BATTEN DV T8 Series SURFACE MOUNTED BATTEN LUMINAIRE Description: TECHNICAL DATA Decovolt fluorescent Batten luminarie suitable for single fluorescent T8 lamp from 18W to 3 W. The luminarie is suitable for suspended or surface mounted application. Application: Suitable for general lighting applications in indoor areas like offices, schools, hospitals and commercial areas like shops etc. Features: Sturdy construction. Switch start circuit. Easy to install & maintain Low Energy loss ballast & High ballast factor for maximum light output. Internal wiring with heat Resistant (5 C) single strand copper wire. Options: HPF capacitors Electronic starters High freq. Electronic ballasts HF circuits, RFI capacitors Other voltage and frequency. MATERIAL & FINISH Batten Frame: 0. mm thick pre-treated and Powder coated cold rolled steel sheet with microns paint thickness of color RAL 901. Ballast: Decovolt Low energy loss, noiseless, operation, low operating temperature, minimum temperature rise. The ballast fixed with screws, nuts & serrated washer ensures positive locking and proper earthing. End Caps: Separate 2 nos. of Polycarbonate end caps are provided, which are flame retardant and self -extinguishing type. Plastic end caps improve the aesthetics of the fixtures. The fixing of lamp holders is simple - slide fit. Lamp & Starter holders: Flame -retardant polycarbonate with phosphor bronze contacts. Wiring: PVC insulated single strand heat resistant wire Dimensional details: Type Lamp Rating Dimensions mm Code L W H DV 120 1 x 18 W 18 52 72 DV 220 2 x 18 W 18 0 79 DV 1 1 x 3 W 1228 52 72 DV 2 2 x 3 W 1228 0 79 21
DECOVOLT FLUORESCENT LUMINAIRES MODULAR RECESSED DV- STD SERIES IP20 I F OPTIONS 1V 220V 230V 2V 50Hz 0Hz DEO Starter HPF Capacitor RF Capacitor HF Ballast Emergency Battery Pack Modular Recessed fluorescent luminaires are suitable for T5 & T8 / T12 Fluorescent lamps. This can be operated by Electromagnetic or Electronic Ballast & can be installed in exposed /concealed T-grid applications. Application: Chassis: Made of CRCA sheet steel, chemically cleaned, treated, phosphated & powder coated with RAL 90 on both inside & outside to give high reflective surface finish. Ballast: Energy efficient electromagnetic ballast, with Low energy loss, noiseless operation, low operating temperatures & minimum temperature rise. Electronic Ballast Optional. Lamp holders: With G5/G13 base & body made of Flame-retardant polycarbonate plastic with phosphor bronze contact. Starter holders: Made of Flame-Retardant poly carbonate plastic with phosphor bronze contact. Internal Wiring: With PVC insulated, heat resistant (5 C) single strand Copper wire. The Louvre is made of high purity aluminum sheets with single parabolic shape and with ribbed cross blades. The louver assembly is suspended in the chassis by anticorrosive one springs. The luminaire is also available with back reflectors on request. 22
DECOVOLT FLUORESCENT LUMINAIRES FLUORESCENT LUMINARIES WEATHER PROOF - DV T8 SERIES IP5 1V 220V 230V 2V I F OPTIONS 50Hz 0Hz DEO Starter HPF Capacitor RF Capacitor HF Ballast Emergency Battery Pack Weatherproof Luminaire suitable for single or twin, T5 or T8/T12 fluorescent lamps operated by HF or Electromagnetic Ballast. Application: Suitable for damp/dusty environments such as Industrial premises, factories, power plants, power distribution stations, warehouses, car parks. Material & Finish: Housing: Compression moulded glass reinforced polyester (GRP) Diffuser: UV stabilized PMMA / Polycarbonate. Tray: Pre-treated, White powder coated CRCA Sheet steel Gaskets: Moulded Polyurethane rubber which provides for IP5 Locking Clips: Polycarbonate / stainless steel (Optional) Lamp & starter holders: Made of flame retardant Polycarbonate with phosphor bronze contacts. Wiring: PVC insulated single strand copper wire that can withstand a temperature of 5 CBallast: Low energy loss, noiseless operation, low operating temperatures, minimum temperature rise. Integrated Emergency Battery Pack is not available in 18W version. 0 18 8 L2 L1 Model Lamps Length in mm L1 L2 DVP 118 1X18 W 5 230 DVP 13 1X3 W 1275 83 DVP 158 1X58 W 1575 113 DVP 218 2X18 W 5 230 DVP 23 2X3 W 1275 83 DVP 8 2X58 W 1575 113 23
2 NOTES
NOTES
HEADQUARTERS INTERPLAST CO. LTD P.O.Box: 79, Sharjah, UAE Tel: +971 5335577, +971 5339090 Fax: +971 5395775, +971 533905 E-mail: intrplst@emirates.net.ae INTERPLAST CO. LTD. (Saudi Arabia) P.O. Box 270982 Riyadh 11352 Kingdom Of Saudi Arabia, Tel: +9 1717 +9 171773 Fax: +9 1719 E-mail:ipc@atheer.net.sa INTERPLAST UK.LTD. 15 High Street, Inverurie, Aberdeenshire AB51 3QA Tel: (+) 017 29555 Fax: (+) 017 72191 E-mail: sales@interplast.co.uk www.interplast.co.uk Web site: www.interplast.ae www.edisonelectricalproducts.com