Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: Filtration Media 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) 530 l/min (DN40) 25..40µm depending on the pilotvalve Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock Manual override External / internal drain Suitable for hazardous location Further options (material, media etc.) upon request. Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. Technical Data of the Solenoid Nominal voltage: Nominal current: Leakage power: Input power: Cable entry: Type of Protection ATEX: II 2G EEx d IIC T6 24 VDC ~0.138 A ~3.3 W (-20 C to +60 C) ~3.3 W (-4 F to +140 F) ~3.3 W M20x1,5 Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Page 1/2
Solenoid operated EEx d IIC T6 Drawing of DN10, piloted by a DN2 Page 2/2
Solenoid operated II 2G EEx de II B+H² T4/T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: Filtration Media 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) 25..40µm depending on the pilotvalve Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock Manual override External / internal drain Suitable for hazardous location Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. Technical Data of the Solenoid Nominal voltage: Nominal current: Leakage power: 250 VDC/VAC 50-60 Hz 1.9 A 22 W T4 (-20 C to+70 C) 22 W T4 (-4 F to +158 F) 20 W T6 (-20 C to+40 C) 20 W T6 (-4 F to +104 F) Standard leakage power: DN3 = 13 Watt DN6 = 20 Watt Stroke: DN3 = 4 mm DN6 = 5 mm Pulse time, min. DN3 = ~200 ms DN6 = ~145 ms Current tolerances +/- 10% Hold voltage level ~30-35% RVCD 100% (ED) Cable Entry: M20x1,5 Type of Protection ATEX : II 2G EEx de II B+H² T4/T6 Page 1/2
Solenoid operated II 2G EEx de II B+H² T4/T6 Drawing of DN20, Piloted by a DN3 Page 2/2
Solenoid operated EEx ia/ib IIC T5/T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: Filtration Media 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) 25..40µm depending on the pilotvalve Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock External / internal drain Manual override Suitable for hazardous location Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. Technical Data of the Solenoid Nominal voltage: Nominal current: Input Power: Stroke: Type of Protection ATEX: EEx ia II C T5/T6 ~ 11 VDC ~ 46 ma ~ 0.5 W 2 mm Description of the Solenoid The solenoid used for the electric actuation of the valves consists of a solenoid with a diode safety barrier (three diodes in parallel-circuit). The solenoid and the diode safety barrier are completely molded in sealing compound. The maximum current of the external is (intrinsical safe) circuit is 660 ma and the connection of this is circuit is made by a plug mounted onto the enclosure. The solenoid can be equipped with an electronic device to reduce the current while still energised. Page 1/2
Solenoid operated EEx ia/ib IIC T5/T6 Drawing of DN10, Piloted by a DN2 Page 2/2
General Purpose Coil Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: Filtration 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) 25..40µm depending on the pilotvalve Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. Photographic view Media Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock External / internal drain Suitable for hazardous location Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Page 1/2
General Purpose Coil Drawing of DN15, piloted by a DN6, 3/2 Way Valve, NO/NC Page 2/2
Pneumatically operated Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. Photographic view DN15 Media Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock External / internal drain Suitable for hazardous location Solenoid, manual, cam operated Available as 3/3 and 4/3 valve (middle position to be determined) Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Page 1/2
Pneumatically operated Drawing of a 3/2 valve DN15 Page 2/2
Cam operated Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. General view Media Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock External / internal drain Solenoid or manually operated Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Page 1/2 Chapter 4
Cam operated Cross-section of a 2/2 cam operated DN10 Page 2/2 Chapter 4
Manually operated Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves, these valve sizes are usually piloted. The valve spool is designed of a spool and one (2/2) or two (3/2) poppets to ensure a leakage-free valve. Symbol (2/2 and 3/2, NO / NC) Technical Data of the Valve Nominal pressure: Nominal size: Temperature range: Nominal flow: 400 bar max. 5.800 psi max. DN10 to DN40-25 C to +80 C -13 F to +176 F 33 l/min (DN10) to 530 l/min (DN40) Ports As the valves are mounted onto a manifold (subplate) the port size and type is determined by the manifold. The valve can be body-ported as well. Media Mineral oil, HFA, pure (tap) water, water glycol For other media please contact us. Options The following options are available: Viton-sealing for higher temperatures NBR, EPDM Position indicator Hydraulic lock External / internal drain Suitable for hazardous location Solenoid or cam operated Available as 3/3 and 4/3 valve (middle position to be determined) Further options (material, media etc.) upon request. Designation 403010 xxx DN10 403015 xxx DN15 403020 xxx DN20 403032 xxx DN32 403040 xxx DN40 Page 1/2 Chapter 4
Manually operated Drawing of a 4/3 manually operated DN10, direct acting Drawing of a 3/2 manually operated DN15, internally piloted Page 2/2 Chapter 4