Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation more and more easily. This tendency has found Univer perfectly prepared with the presentation of Compa and Compa series which confirm its usual dynamism, original projects and utmost attention to the current marked demands. TECHNICAL CHARACTERISTICS COMPA - E... series Orifice: mm Working pressure: bar Ambient temperature: -10 + 5 C Fluid temperature: -0 + 50 C Flow capacity: Nl/min * Fluid: filtered air 10 µm, not dehumidified Body: die-cast zamak M5 threaded connections or for assembly s (or vice-versa) Modular bases with quick connections ( x ) or M5 threaded connections. Coil type: U05 part number DD---- (see section Accessories page 11). COMPA - F... series Orifice: mm Working pressure: bar Ambient temperature: -10 + 5 C Fluid temperature: -0 + 50 C Flow capacity: Nl/min * Fluid: filtered air 10 µm, not dehumidified Body: acetalic resin. Covers die-cast zamak Single or manifold bases, available with quick couplings (6 x ) or with threaded connections G 1/8 Advisable for cylinders Ø 5 to 63 mm. Coil type: U05 part number DD---- (see section Accessories page 11). * An indicative estimate of the factor "CV" can be obtained by dividing the capacity values expressed in Nl/min by 96. Codification key F 0 Series Return (1) Control (1) SERIES E COMPA F COMPA TYPE 0 assembly - spool system 0 M5 threaded - spool system ** 05 assembly - spool system closed centres 06 assembly - spool system open centres 07 assembly - spool system pressurized centres 08 M5 threaded - spool system closed centres** 09 M5 threaded - spool system open centres** 10 M5 threaded - spool system pressurized centres** OPERATION Spool system 1 = Supply - = Consumptions 3-5 = Exhausts 1 = Control 1 = Return 0 pneumatic 1 mechanical *** electric (d.c. only) 3 differential electrical (d.c.) pneumatic pulse 5 differential pneumatic pulse 6 electrical with external pilot input (d.c. only) 7 electrical (d.c. and a.c.) 8 electrical differential (d.c. and a.c.) 9 electrical with external pilot input (d.c. and a.c.) NOTE: 9 for control 1 0 9 for control 1 1 3 1 5 1 NOTE: to order solenoid operated valves Code in black: for d.c. version Code in blue: for a.c. version **COMPA only *** spool system for base only 105-III
Miniature valves COMPA Series Symbol Control (1) Return Ways Pressure Capacity Time ms (1) Version Ø mm bar Nl/min energ. (1) de-energ. (1) Mass kg Part number 1,8 10 5 8 E-00 Pneum. pilot amplified Pneumech. 1,8 10 0,07 5 8 E-00, 10 1 0 0,1 F-00 3 3 E-0 0,07 Pneum. Pneum. 3 3 E-0 6 6 0,13 F-0 Pneumatic pilot Closed centres Pneumatic pilot Open centres Pneumatic pilot Pressurized centres 1,8 10 17 36 F-05 0,13 17 36 F-06 17 36 F-07 1,8 10 11 11 E-00 E-070 0,08 Electric Pneumech., 10 11 11 E-00 E-070 16 6 0,13 F-00 F-070 10 10 E-0 E-077 0,11 Electric Electric 10 10 E-0 E-077 8 8 0,15 F-0 F-077 The part numbers of valves do not include coils 106-III
Miniature valves COMPA Series Symbol Control (1) Return (1) Version Ways Ø mm Pressure bar Capacity Nl/min Time ms energ. de-energ. (1) (1) Mass kg Part number Solenoid pilot Closed centres 8 0 9 50 0,1 0,16 E-08 E-05 F-05 F-0577 Solenoid pilot Open centres 8 0 9 50 0,1 0,16 E-09 E-06 F-06 F-0677 Solenoid pilot Pressurized centres with mechanical or manual actuation 8 0 9 50 0,1 0,16 E-10 E-07 F-07 F-0777 Symbol Control (1) Return Ways Pressure Capacity Mass Version (1) Ø mm bar Nl/min kg Part number Tappet mech. 0 10 0,07 E-150A Tappet for operation Al-35.. mech. 0 10 0,07 E-1503A Tappet for operation Al-35..Q for panel mech. Pneum. 0 10 0,08 0,09 E-151A E-151P Lever colour Part number Yellow E-15G Lever Lever 0 10 0,09 Black E-15N Red E-15R Green E-15V With regard to panel mounted mechanical/manual operators, please refer to section Accessories. The part numbers of valves do not include coils 107-III
Compa - Overall dimensions valve - Single pneumatic control (threaded ) valve - Double pneumatic control (threaded ) valve - Single electric control (threaded ) valve - Double electric control (threaded ) valve - Single pneumatic control ( on subbase) valve - Double pneumatic control ( on sub-base) valve - Single electric control ( on sub-base) * Overall dimensions of module valve - Double electric control ( on sub-base) valve - Single electric control with bracket ( on sub-base) valve - Double electric control with bracket ( on sub-base) 108-III * Overall dimensions of module
Compa - Overall dimensions valve - lever (threaded ) valve - push pull (threaded ) valve - mechanical operation (threaded ) valve - screw mechanical operation (threaded ) valve - panel mechanical operation (threaded ) AI-3570 AI-3571 AI-357 nero AI-350 109-III
Compa - sub-bases Overall dimensions Material Mass kg Part number G 1/8 inlet plate zamak 0,055 E-500 1 = Supply 3-5 = Exhausts - = Consumptions Manifold sub-base with dorsal outlets M5 zamak 0,095 E-515 - = Consumptions 1 = Control 1 = Return Manifold sub-base with side outlets M5 zamak 0,095 E-505 - = Consumptions 1 = Control 1 = Return Manifold sub-base with quick side couplings Ø x quick couplings Ø pipe x zamak 0,100 0,09 E-510 (pneumatic) E- 511 (electric) - = Consumptions 1 = Control 1 = Return 110-III
Compa - Overall dimensions - valves - single or double pneumatic control valves for sub-base - single electric control - valves for sub-base - double electric control 111-III
Compa -Sub-bases Overall dimensions Material Mass kg Part number G 1/8 inlet plate 0,050 F-500 1 = Supply 3-5 = Exhausts - = Consumptions Manifold sub-base with threaded connections G 1/8 0,06 F-505 - = Consumptions 1 = Control 1 = Return Manifold sub-base with quick side connections Ø 6x quick couplings pipe 0,065 F-510 (pneumatic) F-511 (electric) quick couplings pipe - = Consumptions 1 = Control 1 = Return Single sub-base with threaded connections G 1/8 0,07 F-519 - = Consumptions 3-5 = Exhausts 1 = Control 1 = Return Single sub-base with quick connections Ø 6x* - Ø** 0,057 F-50 (pneumatic) F-51 (electric) - = Consumptions 3-5 = Exhausts 1 = Control 1 = Return 11-III