CABINET LOCKS CABINET LOCKS SECTION 2. ORDER ONLINE Section Table of Contents

Section Table of Contents C Cabinet Double Door Latch... 79 Cabinet Locks... 62 92 Cabinet Locks-IC... 88,90 Cabinet Lock Spacers... 89 Cabinet Locks Plugs... 76 Cabinet Lock Strikes... 76, 89 Cam Locks... 62 92 D Drawer Locks... 62 92 Dust Covers... 67 E Elbow Catches... 82 Electronic Cabinet Locks... 79 81 F File Bars... 84 File Bar with Pushbutton Lock... 83 File Cabinet Locks... 65,68,85,91 92 File Lock... 92 Furniture Locks... 64,68,73,76 G Gang Locks... 72, 78 Garage Door Locks... 72 73 H Handle Locks... 63, 72 73 K Keyblanks CompX... 76 M Mailbox Locks... 62 63 Metal Drawer Locks... 68, 85 P Panel Board Locks... 63 Postal Locks... 62,74 75,83 Pushbutton Cabinet Locks... 79,81,83,86, Push Locks... 63, 69, 78, 82, 86, 90 91 SECTION 2 R Refrigerator Locks... 80 S Screw Type Locks... 66 Secure Locking Bars... 82 Showcase Locks... 67 Spur Washers... 67 Swing-Away File Bars... 62 T Thick Panel Locks... 77 Thumbturn Cam Locks... 85 Vendors ABUS... 62 Bommer... 62 CCL... 62 64 CompX... 64 81 CompX Chicago... 65 CompX elock... 79 CompX Fort... 67 68 CompX National... 68 73 CompX Regulator... 81 CompX Stealthlock... 80 CompX Timberline... 74 79 Don-Jo... 82 HES... 82 HPC... 82 Hudson... 82 Kaba Ilco... 83 Major... 84 NSP... 84 85 Olympus Lock... 86 90 S. Parker Hardware... 91 SRS Sales... 91 92 Call, Toll Free 1.800.282.2837 Section 2-61

Fax Your Order 800.447.2299 SWING-AWAY FILE BARS Swings Clear of the File Doors Padlock not included Meets the DOD's Industrial Security Manual Constructed of heavy 16-gauge formed steel Built-in, spring-loaded hinge Self-tapping mounting screws included Largest diameter 5/16" padlock will fit Order # Item # Length Number of Drawers Price 600-0001 MLK-1 07010 12 1 $43.80 600-0002 MLK-2 07020 22.5 2 $48.24 600-0003 MLK-3 07030 34.5 3 $51.12 600-0004 MLK-4 07040 46 4 $54.84 600-0005 MLK-5 07040 56.75 5 $60.84 3-Tumbler Lock Supplied standard on mailbox compartment doors type 560, 500 & 520. Steel bolt and case. Brass tumblers. 145-0200 BOM-25389 $12.45 File-Guard Locking Bars for File Cabinets See Misc. Non-Locking Hardware Section Combination Cam Locks Best used for: Cabinets Metal/non-metal wooden doors Boxes Drawers Order # Item # Length Price 869-0020 CK2113 5/8 $16.48 869-0030 CK3113 7/8 $18.06 Drawer Locks Disc Tumbler Can be masterkeyed. Reversible for either hand door. 11/32 Throw. US4. For 7/8 Material. Order # Item # Keyblank Price 200-0565 02067 KA 200-0110 $11.09 200-0566 02067 KD 200-0137 $11.09 For 1-1/8 Material. US4. Order # Item # Keyblank Price 200-0567 02067 KA 200-0110 $11.09 Section 2-62

Call, Toll Free 1.800.282.2837 Mailbox Cam Lock For Interior Architectural Mailboxes Nut or clip mounted 90 counter-clockwise cam turn to open. Key removable in locked position only. Keyblank: NA14 Order #: 400-1010 Supplied with selection of five cams, two keys, mounting nuts, mounting clip, lock washer and cam screw. Diecast cylinder with nickel plated face; brass pins; spring steel locking clip. Replaces many manufacturer original equipment products including Bommer, Auth Electric, Miami-Carey, Florence, American. 200-0800 MBL82010 $11.07 Panel Board Lock Self latching latch bolt. US26D. Disc Tumbler. Keyblank: 200-0110 (for both left & right hand) RH Shown Left Hand (25 to a box) 200-0563 COR 15767-LH-KA-CAT60 $14.69 each Right Hand (25 to a box) 200-0561 COR 15767-RH-KA-CAT60 $14.69 each Handle Locks Disc Tumbler Furnished less cam US26D Spindle: 25/32", 3-1/2" 1001 Order # Item # Keyblank Price 200-0593 1000 KD 200-0137 $23.56 200-0594 1001 KA 200-0110 $23.56 200-0595 1001 KD 200-0137 $23.56 1000 Push Locks 7/8" Cylinder Length For 7/8" material thickness 02291 02069 02290, 02291: Push Bolt Type. To lock, push end of cylinder. To unlock, use key. 02069: To lock, push in cylinder and turn counter-clockwise with key. To unlock, turn clockwise with key. End of bolt locks behind strike which prevents doors from being spread apart. For protection of doors, bolt is locked in both in and out positions. Sliding Door Lock: Pin Tumbler Order # Item # Cyl. Length Keyblank Price 200-0580 OLY 02291/400SD US4 KA 1 902-0017 $58.45 200-0581 OLY 02291/400SD US4 KD 1 902-0017 $58.45 200-0578 CCL 02290 US4 KA 7/8 8632C-R1 $55.44 200-0579 CCL 02290 US4 KD 7/8 8632C-R1 $55.44 Locking Strike Type: Disc Tumbler Order # Item # Cyl. Length Keyblank Price 200-0569 CCL 02069 US4 KA 7/8 200-0110 $22.18 Section 2-63

Fax Your Order 800.447.2299 Disc Tumbler 3/8 throw For 7/8 material Requires 7/8 diameter hole 02066: US4 Brass Finish 200-0470 KA-CAT60 $10.40 200-0472 KA-CAT30 $10.40 200-0474 KA-AUE1 $10.40 200-0512 KD $10.40 For 1-1/8 Material 200-0515 KA-CAT30 $10.40 200-0516 KD $10.40 Keyblank: 5865JVR Order #: 200-0110 KA furnished with 1 key KD furnished with 2 keys All supplied 10 to a box 02066: US26D Chrome For 7/8 Material 200-0513 KA-CAT30 $10.40 200-0514 KD $10.40 For 1-1/8 Material 200-0517 KA-CAT30 $10.40 Disc Tumbler US4 satin brass 3/16 bolt For 7/8 thick material Requires 7/8 diameter hole Keyblank: 5865JVR Order #: 200-0110 02065 Dead Bolt 200-0503 KA-CAT30 $12.47 Strike Plate Not Included 02065-1/2 Latch Bolt 200-0507 KA-CAT30 $12.47 200-0508 KD $12.47 Strike Plate Included CAM LOCKS Flange Lock Standard 7/8" flange lock and plug with a 1-1/2" straight cam 605-1045 P45262 KA $36.31 Steelcase Add-On Lock Plug and cylinder using CompX standard "R" key codes 605-1005 R43786 KA $28.24 SpaceCo Cam Lock Plug, cylinder, and hook cam using CompX standard key codes 605-1010 M45836 KD $26.78 605-1015 M45836 KA $26.78 GF Cam Lock Plug, cylinder, and hook cam using CompX standard key codes 605-1020 P45242 KD $33.62 605-1025 P45242 KA $33.62 HON Cam Lock Plug, lip grooved cylinder, and 9/16" straight cam with hole using "ES" key codes 605-1060 M45883 KD $17.78 605-1065 M45883 KA $17.78 Hirsch Cam Lock Plug, clip grooved cylinder and 5/8" pin cam using "ES" key codes 605-1070 M45976 KD $18.36 605-1075 M45976 KA $18.36 Section 2-64

Call, Toll Free 1.800.282.2837 DualAxess Combination Cam Locks with key override DualAxess can be retrofit for existing wood or metal applications. The lock can be mounted vertically or horizontally on flush, overlay or lipped/overlay applications. Attach the cam for 90 latching in any direction, based on individual application needs. To change the combination, the current combination and a valid key is needed. Can be operated using either a combination or a key. 10,000 possible combinations Replaces any standard cam lock Retrofits into existing 3/4 wood or metal holes Small profile fits most doors and drawers Removable lock plug for easy rekeying Master keying standard Heavy duty die cast construction 100% mechanical - no batteries needed Order # Item # Length Price 605-8030 D8030-19 7/8 $54.03 605-8031 D8031-19 1-3/8 $54.03 File Cabinet Locks CHICAGO 4-Pin Tumbler plug Die cast barrel with die cast bolt No. 5002LP has rectangular bolt Satin Chrome Keyblank: DKP-1 Order #: 180-0001 Keyed Alike Keyed Different Item # Length Bolt Price 180-5001 180-5101 5001-LP 1.75 Round $24.72 180-5011 180-5111 5001-50L 1.75 Round $28.00 180-5002 180-5112 5002-LP 2.00 Square $23.83 180-5019 180-5119 EXP-19DC 1.50 Round $24.33 Other models have round bolt Two keys furnished per lock Item #5001-50L - Slot: 1/8 x 1/2 Item #5001-LP - 1/8 x 1/4 File Cabinet Locks Signore File Lock Tool removable plug using CompX standard key codes. Order # Item # Bolt Price 605-1030 M43017 KD Round $32.28 605-1035 M43017 KA Round $32.28 Section 2-65

Fax Your Order 800.447.2299 Ace Flush Handle Cylinders For standard ACE II cylinder Single Bitted Cam Locks 180-1704 1704-KA-1289 $18.42 Cylinder: 3/4" dia. 1-1/8" cam. 1-1/2" cyl. length Keyblank: 1137B-R1 Order #: 865-2737 Set screw hole for anti-pull feature when used in "T" handle with set screw feature. 7 Pin tumbler Brass locking bolt 180-4255 4255-19 KA $25.61 Chrome finish 180-4355 4255-19 KD $25.61 Ace II 7-Pin Tumbler Screw Type Locks Keyblank: 1137B-R1 Order #: 865-2737 7-1/32 length Patented Ace II lock assembly in 3/4 diameter Barrel with two flats Double Bitted Cam Locks Cylinder: 3/4 dia. 1-1/8 removable cam. 7/16 cyl. length Key removed in locked position only Keyblank: DK-4 Order #: 180-1000 180-3205 3205-KA-2001 $24.74 180-3215 3205-KD $24.74 See Section 6 - Electronics for NEW Electronic Cabinet Locks! 360 key rotation with keypull every 180 Includes body nut and two keys For drawing covers down tight on coin meters 5/8 across 180-4107 4107 KA#7341 $36.12 Section 2-66

Call, Toll Free 1.800.282.2837 Cam Locks High Security Tubular Lock A Keyblank: 1137B Order #: 865-2137 FOR-MFW1038 A Dimension 310-2000 KD $25.38 3/8 310-2005 KA-27379 $25.38 310-2010 KA-27380 $25.38 FOR-MFW1058 A Dimension 310-2015 KD $25.38 5/8 310-2020 KA-27379 $25.38 310-2025 KA-27380 $25.38 310-2030 KA-27381 $25.38 FOR-MFW1078 A Dimension 310-2035 KD $26.17 7/8 310-2040 KA-27379 $26.17 310-2045 KA-27380 $26.17 FOR-MFW1118 A Dimension 310-2050 KD $26.17 1-1/8 310-2055 KA-27379 $26.17 310-2060 KA-27380 $26.17 FOR-MFW1148 A Dimension 310-2065 KD $26.17 1-1/2 7 Pin tumbler Circular keyway Comes with two cams 24 to a box 310-2070 KA-27379 $26.17 310-2075 KA-27380 $26.17 Showcase Locks Fort MFWSG9000 Series Provided with two locking bars (one adjustable bar for wood, and one adjustable bar for glass). Exclusive floating wafer tumblers provides more resistance to picking. Promotes repeat business from key duplication Single Bitted FORT Cam Locks with Universal Keyway MULTI-FUNCTION REKEYABLE Keyblank: Fort-KS900 Order #: 310-5901 310-9000 MFWSG9000-KA $35.43 310-9010 MFWSG9000-KD $35.43 A dimension is 1-3/4 Replaces C8800 Stainless steel finish. Keyblank: K54G Order #: 310-0054 310-2300 MFW23168 KA-217 $14.25 310-2305 MFW23168 KA-221 $14.25 310-2310 MFW23168 KD $14.25 Dust Covers Fort Dust Covers Fits over the head of standard cam locks. 310-0001 DC1 Steel Cover $14.11 Spur Washers for cam locks. 045-0117 AW1 $1.86 ea. Section 2-67

Fax Your Order 800.447.2299 Multi-Function Metal Desk Drawer Locks Shaw Walker Type Spring type bolt has 1/8" travel Keyed different Key removable in locked position only Supplied with 2 keys Adjustable length, fits most metal desk drawers Cylinder lock w/2 keys. Reversible bolt provides two lock dimensions Clip and nut retainers Two sizes of lock bolts included Easy to install Polished nickel finish 310-3000 MFW3010-KA217 $14.61 310-3005 MFW3010-KA221 $14.61 310-3010 MFW3010-KD $14.61 Wood Drawer Lock Keyblank: FOR K546 Order #: 310-0054 Multi-function: Spring-latch or deadbolt (shown) function Keyblank: 54G, IN8, Y11 Order #: 400-1040 Order # Item # Keying Finish Material Price 845-3000 MFW23007 KA-217 32D 7/8" $17.90 845-3010 MFW23007 KD 32D 7/8 $17.90 605-8047 C8047-26 KD $63.01 DESK DRAWER LOCK 1/2" cylinder length Keyblank: D8785 Order #: 605-8785 605-0196 C8896-26D KD $46.90 C8133 Drawer Lock - 4 Pin tumbler - 7/8 Cylinder length - Brass finish 605-0174 C8133-915-4 KA $62.26 Section 2-68

Call, Toll Free 1.800.282.2837 Push Locks Pin Tumbler Disc Tumbler C8042 Locking Strike Type Order # Item # Cyl Length Tumbler Price 605-0057 C8142-101-26D KA 1-1/8 Pin $61.61 605-0058 C8142-26D-KD 1-1/8 Pin $61.61 605-0250 C8043-C415A-14A KA 1 Disc $27.35 605-0260 C8043-14A-KD 1 Disc $27.35 605-0005 C8042-C415A-26D 7/8 Disc $51.29 Keyblank: D4291 Order #: 605-4291 C8043 7/8" Diameter Keyblank: D8785 Order #: 605-8785 Pin Tumbler Metal Drawer Locks For center drawers of metal desks. Fits special piercing of drawer front and selvage. Key removable in both locked and unlocked positions. Supplied with two keys and mounting nut. 19/32 Cylinder length 7/16 Bolt Travel 1/4 Max material thickness 7/16 Bolt throw 605-0182 C8137-26D KA 915 $37.00 605-0184 C8137-26D KD $37.00 Drawer Locks Surface mounted. Requires 7/8" hole for cylinder. Cylinder removable from front of lock while lock remains in place. Key removed in both locked or unlocked position. Keyblank: D4291 Order #: 605-4291 Drawer Locks Surface mounted, requires 7/8" dia. hole for cylinder Key removable in both locked and unlocked positions Cylinder length: 15/16" With two keys (D8785) and mounting screw Finishes 3: Bright Brass 4G: Antique Brass 14A: Bright Nickel Keyblank: D8785 Order #: 605-8785 605-0300 C8803-3 KA-C415A $13.36 605-0310 C8803-4G KA-C413A $13.36 605-0315 C8803-4G KD $13.36 605-0320 C8803-14A KA-C436A $13.36 605-0325 C8803-14A KD $13.36 605-8163 C8163-4 KD $31.88 605-8164 C8163-4G-KA-915 $34.49 Section 2-69

Fax Your Order 800.447.2299 Pin Tumbler Door & Drawer Locks Key removable in both locked and unlocked positions. Spring Bolt Door Lock Pin Tumbler Cylinder length: 3/4" 605-0053 C8139-26D KA 915 $62.26 Keyblank: D4291 Order #: 605-4291 Disc Tumbler Door & Drawer Locks Surface mounted. Requires 7/8" diameter hole for cylinder. Key removable in both locked and unlocked positions. Supplied with two keys and mounting screws. C8706 supplied with strike. C8706 Spring Bolt C8703 Deadbolt Door Locks 7/8 Cylinder length 605-0154 C8173-4 KA 915 $42.32 605-0158 C8173-4G KA 915 $39.12 605-0040 C8173-26D KA 915 $42.32 1-1/8 Cylinder length Keyblank: D4291 Order #: 605-4291 605-0041 C8174-26D KA 101 $42.32 605-0042 C8174-26D KD $42.32 7/8 Cylinder length 605-0162 C8178-4 KA915 $42.32 605-0164 C8178-4 KD $42.32 605-0051 C8178-26D KA915 $42.32 1-1/8 Cylinder length 605-0163 C8177-26D KA 107 $42.32 C8704 Keyblank: D8785 Order #: 605-8785 4G: Antique Brass 14A: Bright Nickel Dead Bolt 26D: Dull Chrome Disc Tumbler, Cylinder length: 15/16" 605-0085 C8703-14A KA C415A $13.95 605-0086 C8703-14A KD $14.21 605-0186 C8704-4G KA-C205A $14.30 605-0192 C8704-14A KD $14.81 Spring Bolt Disc Tumbler, Cylinder length: 15/16" Dead Bolt Finishes 3: Bright Brass 4: Satin Brass 605-0115 C8706 US3 KA-C415A $17.63 605-0117 C8706 US3 KD $17.67 1-3/8 Cylinder length 605-0061 C8179-26D KA 101 $42.32 605-0062 C8179-26D KD $42.32 Keyblank: D4291 Order #: 605-4291 Pin Tumbler Cylinder length: 1-1/8" 605-0049 C8135 26D KD $62.26 605-0050 C8135 26D KA-915 $62.26 Section 2-70

Call, Toll Free 1.800.282.2837 Cam Locks Disc Tumbler Die Cast Construction Case Quantity 25 Lipped or Flush Keyblank: D4291 Order #: 605-4291 Order # Item # Finish Length Price 605-0007 C8051 KA C415A 14A 7/16 $10.13 605-0008 C8051 KD 14A 7/16 $10.13 605-0009 C8052 KA C415A 14A 5/8 $10.13 605-0010 C8052 KD 14A 5/8 $10.13 605-0015 C8073 KA C413A 14A 1-3/16 $10.13 605-0016 C8073 KD 14A 1-3/16 $10.13 605-0011 C8073 KA C413A 3 1-3/16 $10.74 605-0012 C8073 KD 3 1-3/16 $10.74 605-0013 C8073 KA C415A 4G 1-3/16 $10.74 605-0014 C8073 KD 4G 1-3/16 $10.74 605-0017 C8054 KA C390A 14A 15/16 $10.13 605-0018 C8054 KD 14A 15/16 $10.13 605-0019 C8075 KA C415A 14A 1-7/16 $10.74 605-0020 C8075KD 14A 1-7/16 $10.74 605-0150 C8075KA C415A 3 1-7/16 $10.74 605-0152 C8075KD 3 1-7/16 $10.74 Cam Locks 5 disc tumbler 90 or 180 cam turn 1-7/16 cylinder length 605-1080 C8075-14A KA-C413A $11.56 Cam Locks Disc Tumbler Brass Construction Case Quantity: 10 Keyblank: D4291 Order #: 605-4291 FLUSH Mounting LIPPED Mounting Length: 1-1/16 Mounting: Flush Order # Item # Finish Price 605-0025 C8102 KA 101 26D $32.42 605-0026 C8102 KD 26D $32.42 Length: 1-3/16 Mounting: Lipped Order # Item # Finish Price 605-0132 C8103 KA 915 4 $32.42 605-0134 C8103 KD 4 $32.42 605-0027 C8103 KA 915 26D $32.42 605-0028 C8103 KD 26D $32.42 Length: 1-7/16 Mounting: Flush Order # Item # Finish Price 605-0136 C8105 KA 915 4 $32.42 605-0029 C8105 KA 101 26D $32.42 Length: 1-3/4 Mounting: Flush Order # Item # Finish Price 605-0140 C8108 KA 107 4 $32.42 605-0141 C8108 KD 4 $32.42 605-0031 C8108 KA 915 26D $32.42 Length: 1-3/4 Mounting: Lipped Order # Item # Finish Price 605-0142 C8109 KA 915 4 $32.42 605-0144 C8109 KD 4 $32.42 605-0146 C8109 KA 101 26D $32.42 605-0148 C8109 KD 26D $32.42 Section 2-71

Fax Your Order 800.447.2299 Cam Locks Operation: Dual function, stop washers provide for either 90 or 180 cam turn. Key removable in both locked and unlocked positions. Cylinder length: 1-3/4" Supplied with two keys (D8785), trim washer, spur washer for wood, mounting nut, two stop washers and two cams. Order # Item # Finish Price 605-0270 C8060 KA C415A 3 $14.24 605-0275 C8060 KD 3 $14.24 605-0290 C8060 KA C413A 14A $14.79 605-0295 C8060 KD 14A $14.79 Brass Pin Tumbler Cam Lock Finish: 26D Order # Item # Length Price 605-0226 C8101 KA-107 15/16 $29.96 605-0220 C8101 KD 15/16 $28.80 Keyblank: D8785 Order #: 605-8785 Gang Locks For locking drawers in desk pedestals and other multiple drawer applications. Requires 7/8" diameter hole for cylinder and dado for bar, measuring 7/8" x 1/8" deep on inside of panel. Key removable in locked and unlocked positions. Turning the key locks all drawers simultaneously (drawers must be in closed position) Bar moves studs into notch in drawer or slide, thus preventing drawer movement. 605-0108 D8090-3 KA-C415A $39.94 605-0110 D8090-4G KA-C415A $39.94 605-0200 D8090-14A KD $35.46 Approx 24 long Replacement Lock Housings & Cylinders C8160 For drawers 7/8" thick. Half mortise design. Interchangeable cylinders attached or removed through use of special key. Key removed in both locked & unlocked positions. Cylinder supplied with two keys. Lock housing supplied with cylinder removal key & mounting screws. Rekeyable. Handle Locks For metal cabinet doors RH or LH applications Latch plate is used in 2 or 3 point latching C8161 Keyblank: D4292 Order #: 605-4292 605-8160 C8160 KD Cylinder $59.75 605-8161 C8161 Housing $29.74 605-0065 C8154-26D KA 107 $91.21 605-0066 C8154-26D KD $91.21 3 Point Latch Plate 605-0098 C8756 $8.11 Single Point Latch Tongue 605-0099 C8757 $6.33 Garage Door Locks Inside door mechanism, installs inside door, near track. Sliding bolt locks into track. 605-0210 C8797-2C $43.55 Keyblank: D4291 Order #: 605-4291 C8756 C8757 Section 2-72

Call, Toll Free 1.800.282.2837 Handle Locks L Type, Garage Door Locks 605-0090 NAL C8747-26D KD $39.94 Case Quantity: 10 4" Spindle C8749 5/16" sq Mounting Holes, Center to Center: 1-1/2 605-0091 NAL C8749-C415A-26D KA $39.94 605-0092 NAL C8749-26D KD $39.94 Case Quantity: 10 3" Threaded spindle Mounting Holes, Center to Center: 1-13/16 605-0095 NAL C8754-C415A-26D KA $39.94 605-0096 NAL C8754-26D KD $39.94 Case Quantity: 10 Keyblank: D8785 Order #: 605-8785 C8747 1 Spindle Finish 5/16 sq 26D: Dull Chrome 8-32 Tapped end hole Mounting Holes, Center to Center: 1-1/2 605-0089 NAL C8747-C415A-26D KA $39.94 C8754 Furniture Locks C8207, C8252, C8826. C8826 is surface mounted, other two require full 11/32" x depth of lock. One key supplied. Key removable in locked and unlocked positions. Dead bolt type. 25 per case. C8252 Keyblank: D8890 Order #: 605-8890 C8207 Finishes 3: Bright Brass 4G: Antique Brass 25 Per Case C8826 Order # Item # Installation Price 605-0069 C8207-3 R.H. Door, Drawer $17.82 Full Mortise 605-0071 C8253-3 L.H. Door, Drawer $16.56 Full Mortise 605-0107 C8826-3 Door/Drawer, $12.57 Surface Mounted C8759 3" Threaded spindle Mounting Holes, Center to Center: 1-1/2 605-0102 NAL C8759-C415A-26D KA $39.94 605-0103 NAL C87549-26D KD $39.94 Case Quantity: 10 Non-locking C8755 Mounting Holes, Center to Center: 1-13/16 605-0097 NAL C8755-26D $39.94 Case Quantity: 10 NATIONAL Chest Locks Lid lock for cedar chest application and other lid locking requirements. Surface mounted and requires a 9/16" diameter hole for cylinder. Key removable in locked or unlocked position. Pushbutton releases lid when lock is used as a latch to keep lid closed but not locked. One key supplied. 7/8" cylinder length. 605-0075 C8414-KA-4G $29.87 Section 2-73

Fax Your Order 800.447.2299 Postal Locks The only mailbox lock to meet and exceed United States Postal Service specification "USPS-L-1172C" Mailbox Locks Keyblank: D4291 Order #: 605-4291 Will retrofit existing NDCBU's (Neighborhood Delivery Collection Box Unit) and CBU's (Cluster Box Unit" with "double D" style cut-out. The only approved mailbox to fit new USPS-STD-4C boxes. C9100, C9200 Features Stainless Steel plug Accommodates up to 3/16 cam 12 degrees taper on cylinder head Drain holes on the bottom of the cylinder Includes spring clip, mounting nut and 3 keys Order # 605-9100 605-9200 Item # C9100 C9200 Price $22.26 $22.26 C9100 operates CLOCKWISE Order #:605-4300 keyblank C9200 operates COUNTER CLOCKWISE Uses Order#: 605-4300 keyblank The old C8710 - C8735 mailbox locks will not fit into new Standard 4C boxes, they will fit into existing Standard 4B and Standard 4B+ boxes. C8730 Pin tumbler C8735 "Multi-cam" Mailbox Locks 5 Cam Configurations; 14A Finish (Bright Nickel). Key removable in locked position only. Keyed-different only. For Inside Mailboxes: C8730 For interior architectural mail boxes. Nut mounted. American Auth Florence Bommer 605-8730 C8730 $13.75 Miami- Carey For Outside Mailboxes: C8735. For exterior-mounted neighborhood boxes. Has keyway dust shutter for lock protection. Clip mounted. Auth Bommer Cutler Federal Florence Superior Order # 605-8735 Item # C8735 Price $17.42 C9300 Postal Lock for non-usps delivered sites The new C9300 postal lock is for: Private delivery postal mailboxes only Colleges and universities Commercial buildings Mail & parcel centers Includes lock, assembled cam and three keys Keyblank: D4400 Order #: 605-Z265 CompX National is the only source for USPS approved 401B (C9300) commercial replacement locks. 605-9300 C9300 Postal Lock $20.33 Not intended to replace the 306B lock, which can be obtained only from the USPS. Section 2-74

Call, Toll Free 1.800.282.2837 Mailbox Locks Pin Tumbler Keyblank: D4291 Order #: 605-4291 C8710 C8713 C8714 C8715 C8717 C8724 Order # National Lock # Locked Cam Position Direction of Turn to Open Replaces Price 605-8710 C8710 Left 90 CCW Bommer Spring Hinge $11.35 605-8713 C8713 Left 90 CCW Auth Electric. Also $11.35 replaces Bommer Lock B25-300 used on Bommer Box 9015 (sleeve inside box must be removed) 605-8714 C8714 Left 90 CCW American Device $11.35 605-8715 C8715 Up 90 CW Florence Mfg. $11.35 605-8717 C8717 Left 90 CCW Nutone $10.50 605-8724 C8724 Left 90 CCW Bommer Spring Hinge $11.35 Spring Mounting Clip GENUINE FACTORY REPLACEMENT LOCKS Application: For doors on architectural mail boxes serviced by the US Postal Service. Supplied with two keys and spring mounting clip. Self-Locking Slam Cam SlamCAM converts CompX National cam locks into self-locking just close the door or drawer. True convenience release the key, and the self-locking component automatically returns the lock, along with SlamCAM, to the locked position. Retrofits CompX National cam locks C8051 through C8075 (7/16-1-7/16 ) Helps eliminate security concerns: slam the door and it s locked! NEW TWO UNIQUE FEATURES IN ONE PACKAGE: SELF-LOCKING AND A SPRING-LOADED LATCH! 605-0001 C7017 Self-Locking Slam Cam $12.25 Note: Using the self-locking component adds 5/16 to the length of the lock Section 2-75

Fax Your Order 800.447.2299 Locks for Wood Furniture & Cabinets Any Lock Plug Snaps into any Cylinder Body All Timberline Locks consist of two separate components: a Lock Plug, and a Cylinder Body. NOTE: Change Tool #D500KY Order #872-0500 is required to remove lock plugs from the cylinder bodies. Most are designed for mounting in 3/4 panels. All mount easily with common #6 screws. Most are used in a 16.5 mm hole. Optional bezels are available that allow use of lock in hole from 3/4 to 7/8 in diameter. Master Key: D101KY Order #: 872-D004 Accessories Order # Item # Description Price 872-0060 C100SP-19 Strike Plate $2.23 872-0065 C101SP-19 Strike Plate $2.23 872-0070 C185SP-19 Strike Plate $2.23 872-0075 C257SP-19 Strike Plate $2.23 872-0080 C500DC-19 Drawer Clip $0.56 Compx Key Blanks 872-0300 D300KY $2.42 Drill Bit. 16.5mm 872-1605 C165DB $143.54 Change Tool Required to install & remove lock plugs in cylinder bodies. TA Series only. Lock Plugs for All Lock Types Features: Small Diameter Solid Brass Keys Coded of Face & Keys Master-Keyed Standard Removable Lock Plug Order # Item # Keying Finish Price 872-0005 C100LP-14A KD Polished Nickel $10.07 872-0010 C100LP-14A KA-100T Polished Nickel $10.07 872-0011 C100LP-14A KA-101T Polished Nickel $10.07 872-0015 C200LP-8 KD Old English $10.07 872-0020 C200LP-8 KA-100T Old English $10.07 872-0021 C200LP-8 KA-101T Old English $10.07 872-0025 C300LP-19 KD Black $10.07 872-0030 C300LP-19 KA-100T Black $10.07 872-0031 C300LP-19 KA-101T Black $10.07 872-0035 C400LP-20 KD Stat. Bronze $10.07 872-0040 C400LP-20 KA-100T Stat. Bronze $10.07 872-0041 C400LP-20 KA-101T Stat. Bronze $10.07 872-0045 C500LP-3 KD Polished Brass $10.07 872-0050 C500LP-3 KA-100T Polished Brass $10.07 872-0051 C500LP-3 KA-101T Polished Brass $10.01 872-0500 D500KY $11.82 Bezels Allow cylinder bodies to be used with 3/4 through 7/8 diameter holes and permits use of locks in 7/8 panels. Order # Item # Finish Price 872-0082 C100BZ-14A Nickel $1.19 872-0083 C200BZ-8 Old English $1.67 872-0084 C300BZ-19 Black $1.67 872-0085 C400BZ-20 Stat. Bronze $1.67 872-0086 C500BZ-3 Brass $3.51 Section 2-76

Call, Toll Free 1.800.282.2837 Thick Panel Locks Application: Universal type lock for either doors or drawers that can accommodate panel thickness from 7/8 to 1-3/8 thick. Operation: 90 cam rotation, CCW to lock. Keying: Order lock plug separately. Packaging: Housing supplied with straight cam and bent cam. Housings are unplated. Cams are zinc plated. 872-0170 C170CB $11.52 Door Lock Application: Surface mounted lock for locking doors. Setback of 9/32 is ideal for overlay doors. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Keying: Order lock plug separately. Packaging: Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0290 C290CB $9.09 Door Lock Application: Low profile, surface mounted lock for locking doors. Setback of 3/32 is ideal for inset doors or locking one door behind another. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Keying: Order lock plug separately. Packaging: Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0240 C240CB $9.09 Drawer Lock Application: Surface mounted lock for locking drawers. Setback of 9/32 is ideal for overlay drawers. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Keying: Order lock plug separately. Packaging: Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0280 C280CB $9.09 Drawer Lock Application: Low profile, surface mounted lock for locking drawers. Setback of 3/32 is ideal for inset drawers. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Keying: Order lock plug separately. Packaging: Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0230 C230CB $9.09 Section 2-77

Fax Your Order 800.447.2299 Front Gang Locks Application: For locking banks of drawers in desks, credenzas and other multiple drawer applications. Lock mounts on front of cabinet. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Packaging: Cylinder is unplated. 872-0100 D100CB $9.09 Side Gang Lock Application: For locking banks of drawers in desks, credenzas and other multiple drawer applications. Lock mounts on side of cabinet. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Packaging: Cylinder is unplated. 872-0150 D150CB $9.09 Keying: Order lock plug separately Keying: Order lock plug separately Push Locks Application: For locking sliding, bypass type doors. Requires 3/4 hole in front door for cylinder. Operation: Pushing in cylinder locks doors, with or without key. 45 key rotation allows cylinder to pop back out to unlock doors. Key removable in both locked and unlocked positions. Keying: Order lock plug separately. Packaging: Supplied with nickel plated finish cup. Housing is black, toughened nylon. Two Drawer Side Gang Lock Application: Two drawer gang lock for locking two pedestal drawers with a single lock. Mounts on side of cabinet. Operation: 180 key rotation, CCW to lock, key removable in both lock and unlocked positions. Packaging: Housing supplied with two C500DC-19 Drawer Clips. Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0270 D270CB $10.16 Keying: Order lock plug separately Cam Locks Application: Universal type lock for either doors or drawers. Kit contains a variety of easily switched cams to accommodate most locking situations. Operation: 90 key rotation, CCW to lock. Packaging: Cylinder supplied with two straight cams and two bent cams. Cylinder is unplated. Cams are zinc plated. 872-0165 C165CB $11.52 and unlocked positions. Keying: Order lock plug separately Double Door Lock Application: Surface mounted lock for locking two adjacent doors. Eliminates the need for a spring catch on the door opposite the lock. Works with either overlay or inset doors. Operation: 180 cam rotation, CCW to lock, key removable in both locked Packaging: Supplied with two strikes as shown. Housing is black, toughened nylon. Cylinder is unplated. Cams are zinc plated. 872-0175 C175CB $17.72 872-0250 C250CB $16.98 Keying: Order lock plug separately Section 2-78

Call, Toll Free 1.800.282.2837 Double Door Latch Eliminate the elbow catch Eliminates the need for an elbow catch, or other devices, and allows hardware to be installed out of the way. No need to reach inside cabinet to release elbow catch Doors can be closed in any order Low profile latch mechanism reduced product footprint inside cabinet Requires use of a single lock (sold separately) Allows two or three point locking for standard or wardrobe style double door cabinets when used with a lock Easy to install and use Exceeds pull force about 150 lbs How To Order 1. Determine location of lock - right hand or left hand 2. Decide where latch is needed - top or bottom mount #872-2000 #872-3000 #872-3000 #872-2000 872-2000 TIM D200DL-BLK TOP MOUNT KIT $6.51 872-3000 TIM D300DL-BLK BOTTOM MOUNT KIT $6.51 A keyless, standalone electronic access control lock for cabinets Great for: Drug and supply cabinets Key control boxes Medical records Personnel records Features: 250 user/supervisor codes Surface mounted Audible alarm bolt system Low battery indicator Motor driven latching mechanism Compatible with 12-volt electric door strikes Audit trail of last 1500 access attempts with date, time, and user name Use anywhere access control is needed or required 4 AA battery pack mounts remotely; Alkaline batteries recommended - Not Included Jump Start 9-volt battery power port allows the user, with a valid credential, to access the CompX elock when the batteries are exhausted Standard RJ11 communications port for audit trail download Check price 605-2005 EL-2004-PRKP Prox Reader/Keypad $1,182.72 Section 2-79

Fax Your Order 800.447.2299 Electronic Access Control for Cabinetry CompX elock is a highly engineered lock with a motor-driven latch. It features a non-volatile memory that stores 250 user / supervisor codes and audit trail. With optional lockview audit trail software, CompX elock remembers 1500 access attempts. Programming is simple with numeric keypad or Windows based LockView software. Numeric Keypad Provides authorization with a PIN code of variable length. 605-2025 EL-2004-KP $650.16 Refrigerator Locks elock refrigerator kit provides the same security and monitoring capabilities as the cabinet elock. Kit comes with an elock, a geardriven spring bolt mechanical latch (factory installed), and a strike plate. The kit mounts externally and can be used with refrigerators and freezers in almost any application - pharmacies, nurses' stations, research labs - wherever cold storage access control is needed or required. Since latch is a spring bolt, simply close the door - no need for cumbersome hasps and padlocks. MSKP=Magstripe/Keypad 605-2010 EL-KP-FRKIT $858.48 1st Keyless, Invisible Cabinet Locking System Perfect for wood applications in Education, Healthcare, Office Radio frequency technology permits the Transmitter Pad to be stored anywhere, leaving no trace of visible hardware or signs of being secured. Allows multiple (individually accessible) wood cabinet doors or drawers to be locked from a single transmitter pad within a 15 ft. range. Replaces existing cabinet locks Separate user and supervisor codes (4 to 8 digits) to operate the lock(s). Receiver latch is easily programmed by user through the transmitter pad. Receiver latch mounts within 1/2" drawer suspension clearance. Uses 4 - AAA batteries (not included) for the receiver latch and a CR2032 coin battery (included) for the transmitter pad. Low battery indicator on transmitter pad and receiver latch. For interior use only - recommended temperature range of 50 F to 120 F. SL-100 Standard Package includes: RL-100 Receiver Latch with Hardware, TP-100 Transmitter Pad, SP-600 Strike with Hardware, and TL-600 Installation Tool Contains all parts necessary to lock one door or drawer. Applications Lockers Closet cabinets and storage Kitchen cabinets, liquor cabinets, entertainment units Audio visual cabinets Office furniture Reception and Conference furniture Healthcare cabinetry Retail display cabinets Order # Item # Description Price 605-3000 SL-100 Receiver/Transmitter Pkg. $268.80 605-3001 SP-600 Cabinet Strike Only $7.39 605-3003 RL-100 Receiver Latch Only $173.88 605-3002 RL-110 Receiver Latch, Cabinet Strike $178.42 Section 2-80

Call, Toll Free 1.800.282.2837 Installed Easily on New or Retrofit Applications Electronic Push Button Cabinet Locks Keyless Locking Made Easy! Self-Locking RegulatoR Features SlamCAM, a spring loaded latch, which allows the user to simply close the cabinet door or drawer. No need to return the knob to the locked position. Order # Item # Length Price 605-3010 REG-S-L-3 1-3/16 $150.80 605-3014 REG-S-R-1 7/16 $150.80 605-3015 REG-S-L-1 7/16 $150.80 605-3020 REG-S-R-3 1-3/16 $150.80 605-3025 REG-S-R-5 1-3/4 $150.80 605-3030 REG-S-V-3 1-3/16" $150.80 605-3035 REG-S-V-5 1-3/4 $150.80 Markets: Healthcare Schools/Universities Laboratory Office Furniture Retail Display Applications: Cabinet Doors Or Drawers Lockers Storage Enclosures File Cabinets Computer Server Racks S: Self locking spring latch M: Manual locking L: Left hand (hinge on left side when facing cabinet) R: Right hand (hinge on right side when facing cabinet) V: Vertical Mount Manual Locking RegulatoR Uses existing CompX National cams. Requires users to rotate the knob into the unlocked and locked positions. Order # Item # Length Price 605-3040 REG-M-L-5 1-3/4 $136.50 605-3045 REG-M-R-3 1-3/16 $136.50 605-3050 REG-M-R-5 1-3/4 $136.50 605-3055 REG-M-V-3 1-3/16 $136.50 605-3060 REG-M-V-5 1-3/4 $136.50 Two codes per lock: one user code and one supervisor code; code length is 4-8 digits Low battery indicator 2 AAA batteries included 50,000 cycles extended battery life Battery compartment is easily accessible from the outside of the cabinet Uses 3/4" mounting hole Elbow Catches Die cast elbow catch. 1-3/8 x 5/8 base. Includes mounting screws. ANSI L24021 520-9284 1590 626 $3.90 520-9285 1590 605 $3.90 Section 2-81

Fax Your Order 800.447.2299 K100 Cabinet Lock Wireless possibilities for online access control See Section 6 - Electronics for full specs! Add cabinet security without adding another credential The HES K100 battery operated cabinet lock with Aperio Technology makes it easy and cost effective to bring access control to cabinets and drawers where audit trail and monitoring are becoming increasingly critical. It uses local wireless communication between the lock and an Aperio hub to connect to an access control system, eliminating the cost and difficulty of bringing integrated access control to the cabinet. Secure Locking Bars Steel or wood cabinets. Includes all necessary hasps, staples and crews. Heavy Duty 1/2" x 1-1/2" channel steel. Order # Item # Drawers Length Price 360-0351 SLB-44 4 51-1/2 $130.20 360-0352 SLB-45 5 59-7/8 $136.50 Padlock not included. Mailbox Locks Keyblank: H20 Order #: 902-0017 Comes with Five Cams PRG-PT812. 90 Key. Key removable in locked position only. Finished in US26D (Bright chromium plated, no coating). Push Locks Sliding Door Lock Polybagged 7/8" Length 685-0812 PRG-PT812 $11.52 685-1001 ULR-1030FM KA HL302 $19.94 685-1011 ULR-1030FM KD $20.06 Section 2-82

Call, Toll Free 1.800.282.2837 KABA ILCO Mailbox Locks 1600 1625 Letter Box Locks, Small Cabinets & Drawers The flat tumbler locks feature three solid brass tumblers. Interchangeable with the Eagle 2616-1/4 C. 505-1600 LOR-1600 $11.14 505-1625 LOR-1625 $12.21 Locking Bars for File Cabinets Heavy channel steel bars and steel mounting bolts ensure maximum protection. Standard and Self-Storing FILE-GUARD meet Depart of Defense requirements for storage of secret and "Classified" material, when used with approved padlock. FILE-GUARD with built-in lock. One piece construction. 5-Pin tumbler Schlage "C" keyway. Standard File-Guard Order # Item Drawers Length Price 265-0165 2502 2 29-1/2" $95.90 265-0167 2504 4 52" $103.60 Cabinet Locks Simplex 9600 Series Application 9600 Series Cabinet Locks are specifically designed for cabinet doors, desk drawers, and similar applications. Ideal for use in many locations: medicine chests, liquor cabinets, gun boxes, courier pick-up boxes, home entertainment units, cleaning supply cabinets, tool chests, private files, display cases, supply cabinets, audio-visual cabinets, and petty cash drawers. Features Construction: All metal, cast face plate Installation: Horizontal or vertical, two-step mortise installation using rougher or 5-1/2" x 1" slot with trim plate for wood applications, Punched slot or series of 7/16" drilled holes for metal applications Door Handing: None Numeric Keypad: Vandal resistant, 5 button Bolt: End-throw/cross-throw deadbolt (with manual relock); end-throw spring latch (with automatic relock) Door Thickness: Wood doors - 5/8" to 7/8" Sheet metal applications: 20 to 14 gauge C9600 Series is specially packaged with everything the "Do It Yourself" customer needs. For wood applications. 825-9601 C9601-26D-41 Deadbolt $112.20 5/8" to 7/8" Thickness, End Throw/Hex Knob/Trim Plate included. 825-9602 C9602-26D-41 Spring Latch $112.20 File Guard Series File Guard is ideal for turning any ordinary filing cabinet into a security cabinet. It's steel channel bar and steel mounting bolts ensure maximum security for confidential, classified, and secret documents. The push-button combination lock provides quick, easy, convenient day to day use, and frees you from the high cost of key control. File Guard eliminates key control problems and makes an inexpensive one-time investment for long term security. File-Guard With Built-In Lock 265-0175 2584 4 52-1/2" $129.50 FG10 Series Order # Item # Description Length Price 825-1022 FG12-B 2 Drawer 29 $220.50 825-1024 FG14-B 4 Drawer 51.25 $230.30 Keyless Operation, Almond Finish Section 2-83

Fax Your Order 800.447.2299 File Cabinet Locking Bars Replaces McDowal-Craig Major File cabinet locking bar mounts on left hand side of cabinet. Will not block adjoining cabinets when in either locked or unlocked position. Red tape strip on inside of locking bar indicates unlocked position and protects painted finish on filing cabinet when locked. 49-1/2 Bar for 4 Drawer Cabinets, left hand mount. 527-0300 FB-4L $83.00 Padlock Not Included CAM LOCKS NSP-C8300 A: 3/8 B: 1/4 845-8602 KA-341 $6.83 845-8603 KA-342 $6.83 845-8301 KA-340 $6.83 845-8604 KA-343 $6.83 845-8302 KA-341 $6.83 845-8605 KA-344 $6.83 845-8303 KA-342 $6.83 845-8609 KD $6.83 845-8304 KA-343 $6.83 Keyblank: IN8 845-8305 KA-344 $6.83 Order #: 400-1040 845-8309 KD $6.83 12 per Box or Keyblank: Y11 Order #: 400-1063 Spur washer included for wood applications. Section 2-84 29/32" A B NSP-C8400 A: 5/8 B: 5/16 845-8401 KA-340 $6.83 845-8402 KA-341 $6.83 845-8403 KA-342 $6.83 845-8404 KA-343 $6.83 845-8405 KA-344 $6.83 845-8409 KD $6.83 NSP-C8600 A: 1-1/8 B: 15/16 845-8601 KA-340 $6.83 NSP-C8500 A: 7/8 B: 21/32 845-8501 KA-340 $6.83 845-8502 KA-341 $6.83 845-8503 KA-342 $6.83 845-8504 KA-343 $6.83 845-8509 KA-344 $6.83 845-8508 KD $6.83 12 per Box 12 per Box NSP-C8700 A: 1-3/8 B: 1-1/8 845-8701 KA-340 $7.15 845-8702 KA-341 $7.15 845-8703 KA-342 $7.15 845-8704 KA-343 $7.15 845-8705 KA-344 $7.15 845-8706 KA-SL540 $7.15 12 per Box 845-8709 KD $7.15 Includes two cams: 12 per Box 2.25 Straight cam 1.5 Offset cam Two stop washers included: 90 & 180

Call, Toll Free 1.800.282.2837 File Cabinet Locks Metal Drawer Locks Keyblank: H20 Order #: 685-0020 Same size as Chicago 5002-LP SOU-S-1974/5 Order # Item # Keying Price 845-5002 S 5002 KA L001 $16.86 845-5012 S 5002 KD $16.86 Thumbturn Locks When You Don t Need A Key! Order # Item # Keying Price 845-1974 S 1974/5 KD $10.00 845-1975 S 1973/5 KA 340 $10.00 Have threaded shells and come staked to a 90 rotation. Just apply the cam accordingly for any clockwise or counter-clockwise rotation. Spur washer included for wood installation. Hex Nut Sem Screw 1-1/4 Straight Cam 1-1/8 Offset Cam w/1/4 offset Spur Washer, 1/8 Cylinder Ring Includes all necessary parts to perform all locking functions. Order # Item # Length Price 845-8802 TT625STD 5/8 $7.15 845-8803 TT875STD 7/8 $7.15 845-8801 TT1125STD 1-1/8 $7.15 Wood Drawer Locks SOU-S-711C Drawer Locks 7/8 Cadmium S-711. 7/8 Brass 845-7110 KD $11.51 845-0717 KD $6.44 845-7111 KA-340 $6.83 845-0712 KA-340 $6.44 845-7112 KA-341 $6.83 845-0713 KA-341 $6.44 SOU-S-712 845-0714 KA-342 $6.44 1-1/8 Brass 845-0785 KA-343 $6.44 845-0716 KA-344 $6.44 845-7120 KD $6.83 845-7121 KA-340 $6.83 845-7122 KA-341 $6.83 Section 2-85

Fax Your Order 800.447.2299 Small Pin National Keyway Cabinet Locks National D4291 (4-pin) / D4292 (5-pin) keyway 605-4291 100/200: Door/Drawer Locks Solid brass pin tumbler cylinder, pinned 5. Brass bolt, non-handed. 5 pin tumbler, National keyway. 7/8 barrel diameter. Easily rekeyable. 100DR 100DR = Door Lock (barrel diameter: 7/8 ) 200DW Order # Item # Barrel Length Price 638-0170 100-26D78 KD 7/8 $38.48 638-0175 100-26D78 KA-915 7/8 $38.48 638-0180 100-26D138 KD 1-3/8 $38.48 638-0185 100-26D138 KA-915 1-3/8 $38.48 200DW = Drawer Lock (barrel diameter: 7/8 ) Order # Item # Barrel Length Price 638-0200 200-26D78 KD 7/8 $38.48 638-0205 200-26D78 KA-915 7/8 $38.48 638-0210 200-26D138 KD 1-3/8 $38.48 638-0215 200-26D138 KA-915 1-3/8 $38.48 T37: T-Bolt Locks Olympus T37 T-bolt style desk/drawer lock retrofits the National Lock C8137. Easily rekeyable via working top slide, cylinder retainer staple and removable bezel ring. No more need to pry of faceplates and pin retainer clips. Mounting: ships standard with brass fixing nut, optional spring clip available separately. 4 pin tumbler, National keyway. 300SD: Sliding Door Push Locks Solid brass pin tumbler cylinder, pinned 5. Includes bolt extender and strike locator. Speed release cylinder removal for easy rekeying. 5 pin tumbler, National keyway. 1 barrel diameter. Order # Item # Barrel Length Price 638-0300 300SD-26D KD 1 $54.34 638-0305 300SD-26D KA-915 1 $54.34 DCN: OLYMPUS Cam Locks Cam lock, 5 pin tumbler, National keyway. Easily rekeyable via cylinder retainer staple. Ships standard with one straight and one bent cam that work in all locking positions. Includes patented cam shifting mechanism and anti-rotation plate. Order # Item # For Material Price 638-0330 DCN1-26D KD 3/4 $29.09 638-0335 DCN1-26D KA-915 3/4 $29.09 638-0340 DCN2-26D KD 7/8 $29.09 638-0345 DCN2-26D KA-915 7/8 $29.09 638-0350 DCN3-26D KD 1-1/8 $29.09 638-0355 DCN3-26D KA-915 1-1/8 $29.09 638-0360 DCN4-26D KD 1-1/2 $29.09 638-0365 DCN4-26D KA-915 1-1/2 $29.09 638-0165 T37-26D-101 4 PIN T BOLT LOCK $34.00 638-0167 T37-RC (optional spring clip) $1.57 638-0169 T37-2 (optional long bolt) $14.94 638-0171 T37-3 (optional short bolt) $9.11 N078: Drawer Desk Locks Solid brass pin tumbler cylinder, pinned 5. Brass bolt, non-handed. 5 pin tumbler, National keyway. 7/8 barrel diameter. Easily rekeyable. Order # Item # Barrel Length Price 200-0785 N078-26D KA-915 1-1/8 $32.02 Section 2-86

Call, Toll Free 1.800.282.2837 Commercial Keyway Cabinet Locks Schlage C Keyway Cabinet Locks Available with 1-1/8 or 1-3/8 barrel length. 1-1/8 barrel diameter. Schlage C keyway solid brass cylinder (5-pin) KD or KA, drilled for 6 pins. Uses standard. 115 pins. Includes plastic bar strike and 2 keys. Easily rekeyable. 700 = Door Lock 800 = Drawer Lock 800S 700S Order # Item # Barrel Length Price 638-0070 700S-26D KA-101 1-1/8 $72.31 638-0080 700S-26D KD 1-1/8 $72.31 638-0072 800S-26D KA-101 1-1/8 $72.31 638-0074 800S-26D KD 1-1/8 $72.31 638-0076 800S-26D KA-101 1-3/8 $72.31 638-0078 800S-26D KD 1-3/8 $72.31 Schlage C Keyway or Less Cylinder Cam Locks 1-1/8 diameter. 820S is with Schlage C keyway solid brass cylinder (5-pin) KD or KA, drilled for 6 pins. Uses standard.115 pins. 820LC is less cylinder and accepts Schlage compatible key-inknob cylinders. 820S Order # Item # Max. Material Price 638-0145 820S-26D KD 1-3/8 $73.87 Schlage C Keyway Latch Lock Schlage C keyway solid brass cylinder (5-pin) KD or KA, drilled for 6 pins. Uses standard.115 pins. Easily rekeyable. Barrel diameter: 1-1/8 R = door, right-hand V = drawer, vertical-hand L78R Door, Right- Hand L78V Drawer Less Cylinder Cabinet Locks Accepts Schlage compatible key-in-knob cylinders including Schlage original Classic, Primus or Everest keyways and ILCO #1599 replacement cylinders. ASSA and Medeco cylinders require 1-3/8 barrel length. 700LC 800LC Compatible with ASSA cylinder #65611 and the following Medeco cylinders: Original: 6 pin #20-009S4 or 5 pin #20-008S4 Biaxial: 6 pin #20W009S4 or 5 pin #20W008S4 Keymark: 6 pin #20K009S4 Key retaining cylinder: #20W200S1 700 = Door Lock; 800 = Drawer Lock LCA = 1-1/8 barrel length, LCM = 1-3/8 barrel length Order # Item # Barrel Length Price 638-0098 700LCA-26D 1-1/8 $60.31 638-0100 700LCM-26D 1-3/8 $62.14 638-0102 800LCA-26D 1-1/8 $60.31 638-0104 800LCM-26D 1-3/8 $62.14 Order # Item # Barrel Length Price 638-0120 L78R-26D KA-101 1-1/8 $91.53 638-0115 L78R-26D KD 1-1/8 $91.53 638-0130 L78V-26D KA-101 1-1/8 $91.53 638-0125 L78V-26D KD 1-1/8 $91.53 Less Cylinder Latch Lock 1-1/8 barrel diameter. Accepts Schlage-compatible key-inknob cylinders. R = door, right-hand L78R-LCA Door, Right-Hand Order # Item # Barrel Length Price 638-0135 L78R-LCA-26D 1-1/8 $79.52 Section 2-87

Fax Your Order 800.447.2299 Small Format Interchangeable Core Cabinet Locks 720: SFIC Cam Locks Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Includes all parts for lost motion or key retaining function. Optional cams available separately. Retrofits Best 1E. 638-0600 720LM/DM-26D $55.08 721: SFIC Door/Drawer Cabinet Lock Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Field reversible between door/drawer function. Barrel diameter: 1-1/8. DR = Door Lock DW = Drawer Lock 729R: SFIC Ratchet/Showcase Locks Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Fits up to 1/4 panel thickness. #729RS-3 adjustable strap available separately for up to 5/8 panel thickness. Retrofits Best 3S Series. 638-0160 729R 26D $74.86 638-0168 729RS-3 $15.54 Adjustable strap 728MBL: SFIC Mail Box Locks Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Retrofits Best 8L. Enhanced product now includes heavy-duty cylinder enclosure. 721DR 721DW Order # Item # Barrel Length Price 638-0605 721DR-26D 1-1/4 $63.56 638-0610 721DW-26D 1-1/4 $63.56 638-0615 721DW-138-26D 1-3/8 $65.41 725: SFIC Cabinet Lock Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Available with deadbolt or latch function. Barrel diameter: 1-1/8. Retrofits Best 5L Series. 725RD = Deadbolt 725RL = Latch 638-0635 728MBL-26D $48.84 728MBL B7: BEST Keyway 3/4 Utility Cam Lock This lock retrofits Best 5E Series and is available OBIT or custom keyed. Fits in 3/4 diameter hole. Easily rekeyable and includes patented cam shifting mechanism for increased flexibility. Ships with straight cam, bent cam and anti-rotation plate. Fits up to 7/8 material thickness. (non-ic core) B7 Series 725RD Rim Deadbolt Section 2-88 725RL Order # Item # Barrel Length Price 638-0620 725RD-DW-26D 1-1/16 $56.50 638-0625 725RL-DW-26D 1-1/16 $56.50 724VR: SFIC File Cabinet/Medical Cart Lock Accepts 6 or 7 pin Best, Arrow, Falcon or equivalent IC cores. Retrofits Best 2P73. Includes vertical slot with round spring bolt. Includes red caution flag when unlocked. 638-0630 724VR-26D $62.04 Available keyways: A, E, F, G, J, K, L Order # Item # Keyway Price 638-0650 B7A-26D-O-BIT A $40.96 638-0655 B7E-26D-O-BIT E $40.96 638-0660 B7F-26D-O-BIT F $40.96 638-0665 B7G-26D-O-BIT G $40.96 638-0670 B7J-26D-O-BIT J $40.96 638-0675 B7K-26D-O-BIT K $40.96 638-0680 B7L-26D-O-BIT L $40.96

Call, Toll Free 1.800.282.2837 920: FSIC Cam Locks Accepts Schlage full-size interchangeable core cylinders. Includes all parts for lost motion or key retaining function. Optional cams available separately. Sold less core. 638-0155 920LM/DM-26D $62.00 777/888: Door/Drawer FSIC Cabinet Lock Accepts Schlage full-size interchangeable core cylinders. 1-1/8 barrel diameter. Sold less core. 777 = Door Lock 888 = Drawer Lock Plastic Spacers for 7/8 Diameter Locks Used for flush mounting face of lock with face of cabinet. 777 888 Order # Item # Barel Length Price 638-0110 777ICP-DR-26D 1-7/16 $91.81 638-0112 888ICP-DW-26D 1-7/16 $91.81 WP21 Plastic Spacer for 725 Series locks WP22 Order # Item # Thickness Price 638-0700 WP21 3/32 $1.72 638-0705 WP22 1/4 $1.80 638-0710 WP23 1/2 $1.89 Used for flush mounting face of lock with face of cabinet. For use with Olympus 725RD or 725RL series cabinet locks. Order # Item # Thickness Price 638-0715 WP725 1/8 $2.42 WP23 WP725 Plastic Spacers for 1-1/8 Diameter locks Used for flush mounting face of lock with face of cabinet. 10-350 Strikes 12-4-ZP Type: Frameless drawer strike Finish: Zinc plated 12-2-26D Type: Heavy duty angle strike Finish: US26D 10-348 Order # Item # Thickness Price 638-0720 10-350 1/8 $2.32 638-0725 10-348 1/4 $2.42 638-0730 10-349 1/2 $2.51 638-0735 12-2-26D $2.32 638-0737 12-4-ZP $8.16 10-349 Section 2-89

Fax Your Order 800.447.2299 Commercial Cabinet Lock.115 diameter pins (pinned 5) Two brass keys. Two slotted strikes Cylinder diameter: 1-1/8" Reversible, non-handed bolt 500/600: Door/ Drawer Locks Solid brass pin tumbler cylinder, pinned 5, drilled for 6 pins, Brass bolt, non-handed. 5 pin tumbler, CCL R1 keyway. 7/8 barrel diameter. Rekeyable, 6-Pin "C"; Accepts original Schlage or Ilco replacement deadbolt cylinders. 6-pin, solid brass cylinder 1-1/8 Material Thickness Order # Item # Keyed Price 638-0070 700SC-26D KA $72.31 638-0080 700SC-26D KD $72.31 500DR 600DW 500DR = Door Lock (barrel diameter: 7/8 ) Order # Item # Barrel Length Price 200-1004 500-US478 KA-4T2 7/8 $47.90 200-1026 500-26D78 KD 7/8 $47.90 I.C. Core Cabinet Door/ Drawer Locks Interchangeable Core for 6 & 7 Pin Arrow, Best, Eagle, and Falcon I.C. Core Cylinders. Field reversible to fit both cabinet & drawer applications. Includes: 3 Slotted Strikes, 6 Fixing Screws,1 Extra "N" Pin. Standard Barrel: 1-1/4". 638-0090 OLY-721 I.C. US3 $63.56 400SD: Sliding Door Push Locks 400SD Solid brass pin tumbler cylinder, pinned 5, drilled for 6 pins. Includes bolt extender and strike locator. Speed release cylinder removal for easy rekeying. 5 pin tumbler, CCL R1 keyway. 1 barrel diameter. 200-1027 500-26D78 KA-4T2 7/8 $47.90 200-0553 500-US4138 KD 1-3/8 $47.90 200-0555 500-US4138 KA-4T2 1-3/8 $47.90 200-0557 500-26D138 KD 1-3/8 $47.90 200-0559 500-26D138 KA-4T2 1-3/8 $47.90 600DW = Drawer Lock (barrel diameter: 7/8 ) Order # Item # Barrel Length Price 200-2004 600-US478 KA-4T2 7/8 $47.90 200-2026 600-26D78 KD 7/8 $47.90 200-2027 600-26D78 KA-4T2 7/8 $47.90 200-0536 600-US4138 KD 1-3/8 $47.90 200-0535 600-US4138KA-4T2 1-3/8 $47.90 200-0537 600-26D138 KD 1-3/8 $47.90 200-0538 600-26D138 KA-4T2 1-3/8 $47.90 Order # Item # Barrel Length Price 200-0580 400SD-US3 KD 1 $58.45 200-0581 400SD-US3 KA-4T2 1 $58.45 200-0582 400SD-26D KD 1 $58.45 200-0583 400SD-26D KA-4T2 1 $58.45 Section 2-90

Call, Toll Free 1.800.282.2837 s parker Sliding Door Locks Push Locks Mounting plates: 1-7/8" x 11/16" Bolt: 9/32" diameter Individually boxed with cup strike and screws. #2290. Solid brass, for 7/8" wood. Push bolt type. Pin tumbler. #2286. Polished Brass Push bolt for 7/8" wood. Keyblank: M-1 Order #: 555-1131 2290 2286 650-2290 2290PB31 KA US3 $15.92 650-2286 2286PBA KA US3 $20.29 File Cabinet Locks Filing Cabinet SRS SIGNORE* STYLE 726-0050 SRS 2151 KD $18.00 726-0055 SRS 2151 KA $18.00 Fits HON* F26 File Cabinet The model 2190 Filing Cabinet Lock is a substitute for the HON-F26 model. Includes all mounting hardware, plastic sleeve, and clips. 726-0010 SRS 2190 KD $28.34 726-0015 SRS 2190 KA $28.34 Plastic Sleeve for #2190 (F26 kit) 726-0011 SRS 2190E $4.34 Keyblank: M1 Order #: 555-1131 Keyblank: M1 Order #: 555-1131 Poly bagged; Complete set, ready to install. For HON* F28 Style Keyed different and keyed alike. Replaces original manufacturer's model. Keyblank: IN8 Order #: 400-1040 GLOBAL* LK26 STYLE Keyblank: IN8 Order #: 400-1040 726-0040 2185 KD $18.50 726-0045 2185 KA $18.50 726-0060 SRS 2176 KD $15.50 726-0065 SRS 2176 KA $15.50 * Not manufacturer original equipment products. Section 2-91

SRS Lock Kit for Anderson Hickey Filing Cabinets (New Style) Features: Complete kit, ready to install Does NOT fit Hon or Global Replaces OEM Model #15500 Fits new style vertical filing cabinets (Manufactured after 2-15-99) made by Anderson Hickey, Premier, and Globe 726-0080 SRS 2197 KD $18.50 726-0085 SRS 2197 KA $18.50 Keyblank: IN8 Order #: 400-1040 Fax Your Order 800.447.2299 ANDERSON HICKEY* #15400 STYLE Complete set, ready to install. Replaces original manufacturer's model. Packed in convenient poly bag. SRS model 2194-KD. Keyblank: M1 Order #: 555-1131 Lock Kit for HON Lateral File Lock Complete Kit, ready to install Fits Hon Lateral Files with oval (Double D) cutouts (Does NOT fit files with round cutouts) 726-0030 SRS-2194-KD $26.68 726-0035 SRS-2194-KA $26.68 * Not manufacturer original equipment products. 726-0090 SRS-2188 KD $22.50 726-0095 SRS-2188 KA $22.50 Keyblank: IN8 Order #: 400-1040 X Rim Exit Device Quality Products Value Prices 8300 Series Heavy-Duty Commercial Grade 1 LC2600 Series Standard-Duty Cylindrical Grade 2 Leversets Heavy Duty Deadbolt Grade 2 9500 Grade 1 Exit Device Commercial Grade 1 Architectural Rim Exit Device I guarantee you re going to like these locks. Pete Auseklis Vice President Southern Lock & Supply Section 2-92