PEDESTAL PLUG FANS FPP SERIES, HIGH EFFICIENCY CATALOGUE

PEDESTAL PLUG FANS FPP SERIES, HIGH EFFICIENCY CATALOGUE

FPP SERIES, PEDESTAL PLUG FANS, HIGH EFFICIENCY MOTORS WHEEL DIAMETER: 250mm TO mm MOTORS 0.75kW TO 37kW HOW TO SELECT 3 SPECIFICATIONS 4 INSTALLATION GUIDE 5 CALIBRATION LOGIC 5 FPP SERIES, HIGH EFFICIENCY 8-33 FPP 250 6-7 FPP 280 8-9 FPP 315 10-11 FPP 355 12-13 FPP 14-15 FPP 450 16-17 FPP 18-19 FPP 560 20-21 FPP 630 22-23 FPP 710 24-25 FPP 26-27 FPP 900 28-29 FPP 30-31 2

HOW TO SELECT PART NUMBER IDENTIFICATION When placing an order, the blower product code should be specified. The product code of the plug fan is composed in accordance with the following example: F P P 0 2 8 0 0 8 0 S 3 C 3 0 0 7 5 2 1-2 3 4-7 8-10 11 12 13 14 15-18 19 POSITION 1 TO 2 Design FP = Fan Plug POSITION 3 Mounting P = Pedestal F = Flange POSITION 4 TO 7 Wheel diameter In millimeters POSITION 8 TO 10 Wheel width In millimeters POSITION 11 Wheel construction S = Steel A = Aluminium POSITION 12 Motor type 1 = Standard single phase 3 = Standard 3 phase 5 = EXE 3 phase POSITION 13 Motor construction C = Cast iron A = Aluminium POSITIONS 14 Efficiency level 2 = MEPS2 3 = IE3 4 = IE4 POSITIONS 15 TO 18 Motor output 0750 = kw ie. 0075 =.75kW POSITIONS 19 Motor poles (SPD) 6 = 6 Pole 3

SPECIFICATIONS ELECTRIC MOTORS FPP series plug fans are available with motors that comply with MEPS 2 Efficiency Standards in accordance with AS/NZS 1359.5.2004. MOTOR SPECIFICATIONS Insulation Class F Class with B Class rise (80k) Degree of Protection IP55 Paint Finish Stone Grey (RAL 7030) Terminal Box Right hand side of motor when viewed from the drive end. MOTOR CONTROL MD 100 G GENERAL PURPOSE VARIABLE SPEED DRIVE Hardware: Compact design Graphical LCD Built in EMC Built in DC link choke Coated circuit boards Compatible with field networks (Profibus DP, Can Open Ethernet, etc) IP20/21 (0.4-75 kw) IP66 (0.4-22 kw ) with built in mains isolator Software: User friendly Quick start setup Auto tune Monitoring and fault logging PLC function (smart logic control) P2P I/O slave function Capacitor / fan life cycle management function PM sensorless control Options: Graphical LCD (remote mount option) Side by Side installation Encoder Feedback Braking Module Smart Copier (Copy past parameter option without mains on) DRIVE PART NUMBER IDENTIFICATION M D L V 0 0 0 8 1 0 0 G - 2 E O F D S 1-4 5-8 9-12 13 14 15 16 17 18 19 POSITION 1 TO 4 POSITION 5 TO 8 POSITION 9 TO 12 POSITION 13 POSITION 14 Marathon Drive Series Name Dash Low Voltage General Purpose Motor rating (kw) 0004-0750 0.4kW - 75kW Input Voltage 1: 1-phase 200-240V 2: 3-phase 200-240V 4: 3 phase 380-480V POSITION 15 POSITION 16 POSITION 17 POSITION 18 POSITION 19 Keypad E: LED keypad S: LCD keypad Enclosure Type O: IP20/21 X: IP66 EMC Filter F: Built-in EMC N: Non-EMC Reactor D: Built-in DCL N: Non-reactor I/O M: Multiple (3.5mm) S: Standard (5mm) Drives are fully supported through Regal Australia 24 hour Technical Support Hotline: 1 724 149 UNICO 7140 SOFT STARTER The Unico 7140 is a fully featured current control soft starter with an advanced digital interface, making it versatile and easy to use. UNICO 7141 SOFT STARTER The Unico 7141 is a compact soft starter that limits motor current running starting and stopping. Voltage Current Power 200-525 VAC 23-1600A 7.5-850kW Voltage Current Power 200-525 VAC 23-1600A 7.5-850kW 4

INSTALLATION GUIDE Fan performance can be impacted by the distance of the fan to other components. Take the following into account when installing fans. E A D C B Distance to housing Distance on inlet Distance on discharge A & B = minimum of 1.8 x C D = minimum of 0.5 x C E = minimum of 1 x C CALIBRATION LOGIC CALIBRATION FACTORS ( K-FACTOR ) Each fan is fitted with a single inlet nozzle for measuring air flow. Each size of fan was measured and the calibration curves determined. Based on the curves measured the following calibration factors (k-factor) can be used: Wheel diameter k-factor 250 70 280 86 315 113 355 143 168 450 220 272 560 372 630 430 710 534 687 900 896 1150 MATHEMATICS The calculation of the volume flow is made according to the following formula: v = k x This relation applies for the density ρ = 1.205 kg/. At densities deviating from 1.205 kg/ the following correction can be made: Symbol Unit Unit Description Description V Volume flow Volume at flow at Volume flow Volume at density flow at density Kg/ Kg/ Density Density Differential Differential pressure at pressure the fan at the fan inlet (difference inlet (difference between fan between inlet fan inlet and suction and chamber) suction chamber) 5

FPP 250 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00086 FPP 0250 071 S 3 C 3 0075 2 0.75 80A 2890 1.6 IP55 82.2 82.6 1005.00087 FPP 0250 071 S 3 C 3 0110 2 1.1 80B 2880 2.4 IP55 83.2 84.5 1005.00088 FPP 0250 071 S 3 C 3 0150 2 1.5 90S 2815 3.1 IP55 82.6 84.9 1005.00089 FPP 0250 071 S 3 C 3 0220 2 2.2 90L 2820 4.4 IP55 84.1 84.9 C (Maximum) F 288 B 11 215 288 415 360 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00086 FPP 0250 071 S 3 C 3 0075 2 460 12 445 30 99 154 12.2 20 32.2 1005.00087 FPP 0250 071 S 3 C 3 0110 2 460 12 445 30 99 154 12.2 21 33.2 1005.00088 FPP 0250 071 S 3 C 3 0150 2 460 12 475 30 99 154 12.5 26 38.5 1005.00089 FPP 0250 071 S 3 C 3 0220 2 460 12 30 99 154 12.4 29 41.4 6

FPP 250 SERIES FAN CURVE 0 3000 1.6 45% 2.0 50% 60% 65% 1.3 1.0 69% 65% Static pressure p fa [Pa] 600 300 0.80 0.63 0.50 0.40 0.32 0.25 0.20 0.16 0.13 0.10 0.080 0.063 0.050 75 2 3550 78 3150 0 81 87 0 4 84 60% 55% 50% 5600 200 100 80 60 50 60 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 63 1600 66 1 72 2 2240 69 300 700 3000 0 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 7

FPP 280 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00090 FPP 0280 080 S 3 C 3 0075 2 0.75 80A 2890 1.6 IP55 82.2 82.6 1005.00091 FPP 0280 080 S 3 C 3 0110 2 1.1 80B 2880 2.4 IP55 83.2 84.5 1005.00092 FPP 0280 080 S 3 C 3 0150 2 1.5 90S 2815 3.1 IP55 82.6 84.9 1005.00093 FPP 0280 080 S 3 C 3 0220 2 2.2 90L 2820 4.4 IP55 84.1 84.9 1005.00094 FPP 0280 080 S 3 C 3 0300 2 3 100L 2850 5.7 IP55 85.3 87.2 C (Maximum) F 288 B 11 215 288 415 360 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00090 FPP 0280 080 S 3 C 3 0075 2 460 12 465 30 99 173 13.1 20.0 33.1 1005.00091 FPP 0280 080 S 3 C 3 0110 2 460 12 465 30 99 173 13.1 21.0 34.1 1005.00092 FPP 0280 080 S 3 C 3 0150 2 460 12 495 30 99 173 13.3 26.0 39.3 1005.00093 FPP 0280 080 S 3 C 3 0220 2 460 12 520 30 99 173 13.3 29.0 42.3 1005.00094 FPP 0280 080 S 3 C 3 0300 2 570 12 565 30 99 173 14.0 37.0 51.0 8

FPP 280 SERIES FAN CURVE 3000 2.0 45% 2.5 50% 55% 65% 1.6 1.3 1.0 0.80 0.63 65% 60% 55% 50% Static pressure p fa [Pa] 700 300 0.50 0.40 0.32 0.25 0.20 0.16 0.13 0.10 0.080 78 2 81 3150 84 3550 0 90 4 87 0 200 0.063 0.050 75 2 2240 72 60 69 1 100 66 1600 70 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 63 1 300 700 3000 0 7000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 9

FPP 315 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00095 FPP 0315 090 S 3 C 3 0110 2 1.1 80B 2890 1.6 IP55 82.2 82.6 1005.00096 FPP 0315 090 S 3 C 3 0150 2 1.5 90S 2880 2.4 IP55 83.2 84.5 1005.00097 FPP 0315 090 S 3 C 3 0220 2 2.2 90L 2815 3.1 IP55 82.6 84.9 1005.00098 FPP 0315 090 S 3 C 3 0300 2 3 100L 2820 4.4 IP55 84.1 84.9 1005.00099 FPP 0315 090 S 3 C 3 0 2 4 112M 2870 7.3 IP55 86.3 87.9 C (Maximum) F 300 B 11 215 300 415 360 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00095 FPP 0315 090 S 3 C 3 0110 2 460 12 483 30 99 193 15.2 21.0 36.2 1005.00096 FPP 0315 090 S 3 C 3 0150 2 570 12 513 30 99 193 15.8 26.0 41.8 1005.00097 FPP 0315 090 S 3 C 3 0220 2 570 12 540 30 99 193 15.8 29.0 44.8 1005.00098 FPP 0315 090 S 3 C 3 0300 2 570 12 585 30 99 193 16.1 37.0 53.1 1005.00099 FPP 0315 090 S 3 C 3 0 2 570 12 635 30 99 193 16.1 44.0 60.0 10

FPP 315 SERIES FAN CURVE 3000 45% 2.0 1.6 2.5 65% 50% 55% 1.3 1.0 65% Static pressure p fa [Pa] 600 300 200 0.80 0.63 0.50 0.40 0.32 0.25 0.20 0.16 0.13 0.10 0.080 0.063 75 2 78 2240 2 81 84 3150 87 3550 60% 55% 50% 4100 72 1 69 1600 100 63 66 1 80 1250 60 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 750 3000 0 7000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 11

FPP 355 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00100 FPP 0355 100 S 3 C 3 0110 4 1.1 90S 1415 2.6 IP55 82.8 84.3 1005.00101 FPP 0355 100 S 3 C 3 0150 4 1.5 90L 1410 3.4 IP55 83.5 85.5 1005.00102 FPP 0355 100 S 3 C 3 0220 2 2.2 90L 2820 4.4 IP55 84.1 86.6 1005.00103 FPP 0355 100 S 3 C 3 0300 2 3 100L 2850 5.7 IP55 85.3 87.2 1005.00104 FPP 0355 100 S 3 C 3 0 2 4 112M 2870 7.3 IP55 86.3 87.9 C (Maximum) F 385 B 11 270 385 520 460 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00100 FPP 0355 100 S 3 C 3 0110 4 570 12 545 30 99 216 20.4 27.0 47.4 1005.00101 FPP 0355 100 S 3 C 3 0150 4 570 12 570 30 99 216 20.4 32.0 52.4 1005.00102 FPP 0355 100 S 3 C 3 0220 2 570 12 570 30 99 216 20.4 29.0 49.4 1005.00103 FPP 0355 100 S 3 C 3 0300 2 570 12 615 30 99 216 21.4 37.0 58.4 1005.00104 FPP 0355 100 S 3 C 3 0 2 570 12 665 30 99 216 21.5 44.0 65.5 12

FPP 355 SERIES FAN CURVE 3000 2.5 45% 3.2 50% 55% 60% 65% 1.6 2.0 71% Static pressure p fa [Pa] 600 300 1.3 1.0 0.80 0.63 0.50 0.40 0.32 0.25 0.20 0.16 0.13 69 72 75 84 65% 60% 55% 81 50% 3550 78 3150 2 2 2240 0.10 66 200 57 63 1 60 1600 100 80 60 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 1120 1250 1 700 3000 0 7000 0 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 13

FPP SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00105 FPP 0 112 S 3 C 3 0110 4 1.1 90S 1415 2.6 IP55 82.8 84.3 1005.00106 FPP 0 112 S 3 C 3 0150 4 1.5 90L 1410 3.4 IP55 83.5 85.5 1005.00107 FPP 0 112 S 3 C 3 0220 4 2.2 100LA 1430 4.7 IP55 84.9 85.7 1005.00108 FPP 0 112 S 3 C 3 0300 4 3 100LB 1410 6.2 IP55 86.0 88.1 1005.00109 FPP 0 112 S 3 C 3 0 2 4 112M 2870 7.3 IP55 86.3 87.9 1005.00110 FPP 0 112 S 3 C 3 0550 2 5.5 132S 2905 10.4 IP55 88.3 89.4 C (Maximum) F 385 B 11 270 385 520 460 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00105 FPP 0 112 S 3 C 3 0110 4 570 12 570 30 99 240 23.3 27.0 50.3 1005.00106 FPP 0 112 S 3 C 3 0150 4 570 12 595 30 99 240 23.3 32.0 55.3 1005.00107 FPP 0 112 S 3 C 3 0220 4 570 12 640 30 99 240 24.5 38.0 62.5 1005.00108 FPP 0 112 S 3 C 3 0300 4 570 12 640 30 99 240 24.5 42.0 66.5 1005.00109 FPP 0 112 S 3 C 3 0 2 720 12 690 30 99 240 25.0 44.0 69.0 1005.00110 FPP 0 112 S 3 C 3 0550 2 720 12 757 30 99 240 25.4 82.0 107.4 14

FPP SERIES FAN CURVE 3000 45% 3.2 4.0 50% 60% 65% 87 2.5 2.0 72% 1.6 65% Static pressure p fa [Pa] 600 300 1.3 1.0 0.80 0.63 0.50 0.40 0.32 0.25 0.20 0.16 69 84 60% 55% 81 50% 3150 78 2 75 2 72 2240 200 0.13 66 1600 1 60 63 1 100 80 60 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 1120 1250 700 3000 0 7000 0 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 15

FPP 450 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00111 FPP 0450 125 S 3 C 3 0110 4 1.1 90S 1415 2.6 IP55 82.8 84.3 1005.00112 FPP 0450 125 S 3 C 3 0150 4 1.5 90L 1410 3.4 IP55 83.5 85.5 1005.00113 FPP 0450 125 S 3 C 3 0220 4 2.2 100LA 1430 4.7 IP55 84.9 85.7 1005.00114 FPP 0450 125 S 3 C 3 0300 4 3 100LB 1410 6.2 IP55 86.0 88.1 1005.00115 FPP 0450 125 S 3 C 3 0 4 4 112M 1435 7.9 IP55 87.0 88.5 1005.00116 FPP 0450 125 S 3 C 3 0550 4 5.5 132S 1445 11.2 IP55 87.7 88.3 1005.00117 FPP 0450 125 S 3 C 3 0750 2 7.5 132SB 2900 13.9 IP55 88.1 89.4 C (Maximum) 630 F 465 B 11 335 630 465 650 590 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA 16 A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00111 FPP 0450 125 S 3 C 3 0110 4 570 20 600 53 126 275 37 27 64 1005.00112 FPP 0450 125 S 3 C 3 0150 4 570 20 625 53 126 275 37 32 69 1005.00113 FPP 0450 125 S 3 C 3 0220 4 570 20 670 53 126 275 37.5 38 75.5 1005.00114 FPP 0450 125 S 3 C 3 0300 4 570 20 670 53 126 275 37.5 42 79.5 1005.00115 FPP 0450 125 S 3 C 3 0 4 570 20 720 53 126 275 40 48 88 1005.00116 FPP 0450 125 S 3 C 3 0550 4 720 20 787 53 126 275 40 91 131 1005.00117 FPP 0450 125 S 3 C 3 0750 2 720 20 787 53 126 275 40 86 126

FPP 450 SERIES FAN CURVE 3000 4.0 3.2 45% 50% 60% 65% 87 5.0 Static pressure p fa [Pa] 600 300 2.5 2.0 1.6 1.3 1.0 0.80 0.63 0.50 0.40 0.32 0.25 0.20 0.16 69 72 75 78 81 1600 84 1 73% 2240 65% 60% 2700 2 55% 50% 200 60 66 1 63 1250 1120 100 80 900 60 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 3000 0 7000 0 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 17

FPP SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00118 FPP 0 140 S 3 C 3 0150 4 1.5 90L 1410 3.4 IP55 83.5 85.5 1005.00119 FPP 0 140 S 3 C 3 0220 4 2.2 100LA 1430 4.7 IP55 84.9 85.7 1005.00120 FPP 0 140 S 3 C 3 0300 4 3 100LB 1410 6.2 IP55 86.0 88.1 1005.00121 FPP 0 140 S 3 C 3 0 4 4 112M 1435 7.9 IP55 87.0 88.5 1005.00122 FPP 0 140 S 3 C 3 0550 4 5.5 132S 1445 11.2 IP55 87.7 88.3 1005.00123 FPP 0 140 S 3 C 3 0750 4 7.5 132M 1440 14.7 IP55 88.7 89.9 1005.00124 FPP 0 140 S 3 C 3 1100 4 11 160M 1465 20.9 IP55 89.9 90.4 C (Maximum) 630 F 465 B 11 335 630 465 650 590 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA 18 A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00118 FPP 0 140 S 3 C 3 0150 4 720 20 655 53 126 304 43.0 32.0 75.0 1005.00119 FPP 0 140 S 3 C 3 0220 4 720 20 700 53 126 304 43.5 38.0 81.5 1005.00120 FPP 0 140 S 3 C 3 0300 4 720 20 700 53 126 304 43.5 42.0 85.5 1005.00121 FPP 0 140 S 3 C 3 0 4 720 20 750 53 126 304 45.0 48.0 93.0 1005.00122 FPP 0 140 S 3 C 3 0550 4 720 20 817 53 126 304 45.5 91.0 136.5 1005.00123 FPP 0 140 S 3 C 3 0750 4 720 20 853 53 126 304 45.5 97.0 142.5 1005.00124 FPP 0 140 S 3 C 3 1100 4 720 20 976 53 126 304 49.0 140.0 189.0

FPP SERIES FAN CURVE 3000 Static pressure p fa [Pa] 600 300 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.80 0.63 0.50 0.40 0.32 0.25 45% 50% 60% 65% 6.3 73% 87 65% 60% 84 55% 50% 81 2 2240 78 75 1 72 1600 200 0.20 69 1 60 66 1250 63 1120 100 80 900 60 50 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 3000 0 7000 0 0 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 19

FPP 560 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00125 FPP 0560 160 S 3 C 3 0150 6 1.5 100L 925 3.5 IP55 79.9 81.6 1005.00126 FPP 0560 160 S 3 C 3 0220 4 2.2 100LA 1430 4.7 IP55 84.9 85.7 1005.00127 FPP 0560 160 S 3 C 3 0300 4 3 100LB 1410 6.2 IP55 86.0 88.1 1005.00128 FPP 0560 160 S 3 C 3 0 4 4 112M 1435 7.9 IP55 87.0 88.5 1005.00129 FPP 0560 160 S 3 C 3 0550 4 5.5 132S 1445 11.2 IP55 87.7 88.3 1005.00130 FPP 0560 160 S 3 C 3 0750 4 7.5 132M 1440 14.7 IP55 88.7 89.9 1005.00131 FPP 0560 160 S 3 C 3 1100 4 11 160M 1465 20.9 IP55 89.9 90.4 C (Maximum) 760 F 680 B 11 433 760 680 813 720 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA 20 A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00125 FPP 0560 160 S 3 C 3 0150 6 720 20 740 53 126 342 62.5 37.0 99.5 1005.00126 FPP 0560 160 S 3 C 3 0220 4 720 20 740 53 126 342 62.5 38.0 100.5 1005.00127 FPP 0560 160 S 3 C 3 0300 4 720 20 740 53 126 342 62.5 42.0 104.5 1005.00128 FPP 0560 160 S 3 C 3 0 4 720 20 790 53 126 342 62.5 48.0 110.5 1005.00129 FPP 0560 160 S 3 C 3 0550 4 880 20 857 53 126 342 67.0 91.0 158.0 1005.00130 FPP 0560 160 S 3 C 3 0750 4 880 20 893 53 126 342 67.0 97.0 164.0 1005.00131 FPP 0560 160 S 3 C 3 1100 4 880 20 1016 53 126 342 69.0 140.0 209.0

FPP 560 SERIES FAN CURVE 3000 4.0 5.0 6.3 45% 50% 55% 60% 8.0 73% 3.2 65% 2.5 60% 2.0 87 55% Static pressure p fa [Pa] 600 300 1.6 1.3 1.0 0.80 0.63 0.50 0.40 75 50% 84 2240 81 78 1 1600 1 72 200 63 69 1250 1120 66 900 100 80 60 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 3000 0 7000 0 0 30000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 21

FPP 630 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00132 FPP 0630 180 S 3 C 3 0150 6 1.5 100L 925 3.5 IP55 79.9 81.6 1005.00133 FPP 0630 180 S 3 C 3 0220 6 2.2 112M 955 5.4 IP55 81.9 82.5 1005.00134 FPP 0630 180 S 3 C 3 0300 6 3 132S 965 6.7 IP55 83.3 83.7 1005.00135 FPP 0630 180 S 3 C 3 0 4 4 112M 1435 7.9 IP55 87.0 88.5 1005.00136 FPP 0630 180 S 3 C 3 0550 4 5.5 132S 1445 11.2 IP55 87.7 88.3 1005.00137 FPP 0630 180 S 3 C 3 0750 4 7.5 132M 1440 14.7 IP55 88.7 89.9 1005.00138 FPP 0630 180 S 3 C 3 1100 4 11 160M 1465 20.9 IP55 89.9 90.4 1005.00139 FPP 0630 180 S 3 C 3 1 4 15 160L 1460 28.6 IP55 90.8 91.6 C (Maximum) 760 F 680 B 11 433 760 680 813 720 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA 22 A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00132 FPP 0630 180 S 3 C 3 0150 6 720 20 770 53 126 377 70.5 37.0 107.5 1005.00133 FPP 0630 180 S 3 C 3 0220 6 720 20 820 53 126 377 71.0 47.0 118.0 1005.00134 FPP 0630 180 S 3 C 3 0300 6 880 20 887 53 126 377 75.0 76.0 151.0 1005.00135 FPP 0630 180 S 3 C 3 0 4 720 20 820 53 126 377 71.0 48.0 119.0 1005.00136 FPP 0630 180 S 3 C 3 0550 4 880 20 887 53 126 377 75.0 91.0 166.0 1005.00137 FPP 0630 180 S 3 C 3 0750 4 880 20 923 53 126 377 75.0 97.0 172.0 1005.00138 FPP 0630 180 S 3 C 3 1100 4 880 20 1046 53 126 377 77.0 140.0 217.0 1005.00139 FPP 0630 180 S 3 C 3 1 4 880 20 1076 53 126 377 77.0 170.0 247.0

FPP 630 SERIES FAN CURVE 3000 45% 50% 55% 60% 5.0 6.3 8.0 10 73% 4.0 65% 3.2 60% Static pressure p fa [Pa] 600 300 2.5 2.0 1.6 1.3 1.0 0.80 0.63 0.50 75 55% 87 50% 84 1 81 1600 78 1 1250 200 63 72 1120 69 66 900 100 80 60 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 3000 0 7000 0 0 30000 Volume flow rate V [m 3 /h] 710 TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 23

FPP 710 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00140 FPP 0710 200 S 3 C 3 0220 6 2.2 112M 955 5.4 IP55 81.9 82.5 1005.00141 FPP 0710 200 S 3 C 3 0300 6 3 132S 965 6.7 IP55 83.3 83.7 1005.00142 FPP 0710 200 S 3 C 3 0 6 4 132M 965 8.6 IP55 84.6 85.0 1005.00143 FPP 0710 200 S 3 C 3 0550 6 5.5 132MB 965 11.8 IP55 86.0 86.4 1005.00144 FPP 0710 200 S 3 C 3 0750 4 7.5 132M 1440 14.7 IP55 88.7 89.9 1005.00145 FPP 0710 200 S 3 C 3 1100 4 11 160M 1465 20.9 IP55 89.9 90.4 1005.00146 FPP 0710 200 S 3 C 3 1 4 15 160L 1460 28.6 IP55 90.8 91.6 1005.00147 FPP 0710 200 S 3 C 3 1850 4 18.5 180M 1470 35.3 IP55 91.2 91.3 C (Maximum) 960 F 750 B 11 543 960 750 1023 910 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA 24 A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00140 FPP 0710 200 S 3 C 3 0220 6 885 30 885 83 199 433 120.0 47.0 167.0 1005.00141 FPP 0710 200 S 3 C 3 0300 6 885 30 952 83 199 433 121.0 76.0 197.0 1005.00142 FPP 0710 200 S 3 C 3 0 6 885 30 988 83 199 433 121.0 85.0 206.0 1005.00143 FPP 0710 200 S 3 C 3 0550 6 885 30 988 83 199 433 121.0 94.0 215.0 1005.00144 FPP 0710 200 S 3 C 3 0750 4 885 30 988 83 199 433 121.0 97.0 218.0 1005.00145 FPP 0710 200 S 3 C 3 1100 4 1045 30 1111 83 199 433 131.0 151.0 282.0 1005.00146 FPP 0710 200 S 3 C 3 1 4 1045 30 1141 83 199 433 131.0 168.0 299.0 1005.00147 FPP 0710 200 S 3 C 3 1850 4 1045 30 1211 83 199 433 133.0 211.0 344.0

FPP 710 SERIES FAN CURVE 3000 13 50% 55% 60% 65% 10 74% 8.0 Static pressure p fa [Pa] 600 300 6.3 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.80 66 75 81 78 1120 87 84 1 1250 65% 60% 55% 1 1600 200 69 72 900 710 100 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 0 7000 0 0 30000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 25

FPP SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00148 FPP 0 224 S 3 C 3 0 6 4 132M 965 8.6 IP55 84.6 85.0 1005.00149 FPP 0 224 S 3 C 3 0550 6 5.5 132MB 965 11.8 IP55 86.0 86.4 1005.00150 FPP 0 224 S 3 C 3 0750 6 7.5 160M 970 16.5 IP55 88.6 88.9 1005.00151 FPP 0 224 S 3 C 3 1100 6 11 160L 970 23.7 IP55 88.7 89.2 1005.00152 FPP 0 224 S 3 C 3 1 4 15 160L 1460 28.6 IP55 90.8 91.6 1005.00153 FPP 0 224 S 3 C 3 1850 4 18.5 180M 1470 35.3 IP55 91.2 91.3 1005.00154 FPP 0 224 S 3 C 3 2200 4 22 180L 1475 41.0 IP55 91.6 92.0 C (Maximum) 960 F 750 B 11 543 960 750 1023 910 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00148 FPP 0 224 S 3 C 3 0 6 885 30 1038 83 199 481 142.0 85.0 227.0 1005.00149 FPP 0 224 S 3 C 3 0550 6 885 30 1038 83 199 481 142.0 94.0 236.0 1005.00150 FPP 0 224 S 3 C 3 0750 6 1045 30 1161 83 199 481 152.0 151.0 303.0 1005.00151 FPP 0 224 S 3 C 3 1100 6 1045 30 1091 83 199 481 152.0 168.0 320.0 1005.00152 FPP 0 224 S 3 C 3 1 4 1045 30 1091 83 199 481 152.0 170.0 322.0 1005.00153 FPP 0 224 S 3 C 3 1850 4 1045 30 1231 83 199 481 154.0 211.0 365.0 1005.00154 FPP 0 224 S 3 C 3 2200 4 1045 30 1261 83 199 481 154.0 241.0 395.0 26

FPP SERIES FAN CURVE 3000 13 50% 55% 60% 65% 16 74% 10 8.0 6.3 65% Static pressure p fa [Pa] 600 5.0 4.0 3.2 2.5 2.0 1.6 84 90 60% 55% 1550 87 1 1250 81 1120 78 300 72 75 900 200 710 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 0 7000 0 0 30000 00 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 27

FPP 900 SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00155 FPP 0900 250 S 3 C 3 0750 6 7.5 160M 970 16.5 IP55 88.6 88.9 1005.00156 FPP 0900 250 S 3 C 3 1100 6 11 160L 970 23.7 IP55 88.7 89.2 1005.00157 FPP 0900 250 S 3 C 3 1 6 15 180L 980 29.9 IP55 89.6 89.6 1005.00158 FPP 0900 250 S 3 C 3 1850 6 18.5 200L 980 34.1 IP55 90.4 90.6 1005.00159 FPP 0900 250 S 3 C 3 2200 6 22 200LB 975 41.7 IP55 90.8 91.4 1005.00160 FPP 0900 250 S 3 C 3 3000 4 30 200L 985 57.6 IP55 92.2 92.5 C (Maximum) 1180 F 950 B 11 674 1180 950 1264 1130 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00155 FPP 0900 250 S 3 C 3 0750 6 1160 30 1216 83 199 528 213.0 151.0 364.0 1005.00156 FPP 0900 250 S 3 C 3 1100 6 1160 30 1246 83 199 528 213.0 168.0 381.0 1005.00157 FPP 0900 250 S 3 C 3 1 6 1320 30 1316 83 199 528 217.0 226.0 443.0 1005.00158 FPP 0900 250 S 3 C 3 1850 6 1320 30 1269 83 199 528 229.0 267.0 496.0 1005.00159 FPP 0900 250 S 3 C 3 2200 6 1320 30 1269 83 199 528 229.0 288.0 517.0 1005.00160 FPP 0900 250 S 3 C 3 3000 4 1320 30 1269 83 199 528 229.0 290.0 519.0 28

FPP 900 SERIES FAN CURVE 3000 50% 55% 60% 20 65% 16 74% 10 13 8.0 65% Static pressure p fa [Pa] 600 6.3 5.0 4.0 3.2 2.5 2.0 84 60% 55% 90 1 87 1250 1120 81 72 900 300 78 200 75 710 630 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 7000 0 0 30000 00 70000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 29

FPP SERIES FRAME Galvanised steel IMPELLER Welded sheet steel Coated black RAL 9005 7 blades backward inclined ACCESSORIES Purchased separately as required. Marathon variable speed drives Unico soft starters Guarding, inlet & impeller INLET RING Sheet steel Fitted with single nozzle for air flow measurement HIGH EFFICIENCY MOTOR DATA Rated Frame Speed Full Load IP Efficiency as % of Full Load Power kw Size RPM Current Rating 100% 75% 1005.00161 FPP 280 S 3 C 3 1 6 15 180L 980 29.9 IP55 89.6 89.6 1005.00162 FPP 280 S 3 C 3 1850 6 18.5 200L 980 34.1 IP55 90.4 90.6 1005.00163 FPP 280 S 3 C 3 2200 6 22 200LB 975 41.7 IP55 90.8 91.4 1005.00164 FPP 280 S 3 C 3 3000 6 30 225M 985 57.6 IP55 92.2 92.5 1005.00165 FPP 280 S 3 C 3 3700 6 37 250M 985 66.8 IP55 92.2 92.5 C (Maximum) 1180 F 950 B 11 674 1180 950 1264 1130 D (E) Multiple Options A HIGH EFFICIENCY DIMENSION DATA A B C D E F Assembly Motor Gross (max) Weight (kg) Weight (kg) Weight (kg) 1005.00161 FPP 280 S 3 C 3 1 6 1320 30 1376 83 199 585 254.0 226.0 480.0 1005.00162 FPP 280 S 3 C 3 1850 6 1320 30 1429 83 199 585 267.0 267.0 534.0 1005.00163 FPP 280 S 3 C 3 2200 6 1320 30 1429 83 199 585 267.0 288.0 555.0 1005.00164 FPP 280 S 3 C 3 3000 6 1320 30 1550 83 199 585 267.0 408.0 675.0 1005.00165 FPP 280 S 3 C 3 3700 6 1320 30 1618 83 199 585 273.0 520.0 793.0 30

FPP SERIES FAN CURVE 3000 20 50% 55% 60% 25 65% 74% 16 13 10 65% Static pressure p fa [Pa] 600 8.0 6.3 5.0 4.0 3.2 84 60% 55% 90 1250 1120 87 75 900 81 300 78 710 200 Speed [1/min] Efficiencies % Power kw Sound pressure level A-weighted [db(a)] 630 0 0 30000 00 70000 Volume flow rate V [m 3 /h] TEST METHOD Measurement according to DIN 24163 (test bench arrangement C) p = 1.205kg/m 3 Sound pressure level measured at 1m distance 31

Regal Beloit Australia Pty Ltd ABN 61 122 303 084 19 Corporate Ave (PO Box 2340) Rowville VIC 3178, AUSTRALIA Customer Service: 1300 888 853 Fax: +61 3 9237 4050 www.regalaustralia.com.au VICTORIA / HEAD OFFICE 19 Corporate Avenue Rowville VIC 3178 T: 1300 888 853 F: +61 3 9237 4050 NEW SOUTH WALES 8 Bushells Place Wetherill Park NSW 2164 T: 1300 888 853 F: +61 2 8781 3131 QUEENSLAND 7 Mahogany Court Willawong QLD 4110 T: 1300 888 853 F: +61 7 3246 3210 CAIRNS (Service Repairs Sales) 2/159-161 Newell Street Bungalow QLD 4870 T: 1300 888 853 F: +61 7 4033 5553 MACKAY Shed 5/58 Elvin Street Paget QLD 4740 T: 1300 888 853 F: +61 7 4952 6277 SOUTH AUSTRALIA 47 Research Road Pooraka SA 5095 T: 1300 888 853 F: +61 8 8359 5675 WESTERN AUSTRALIA 21 Colin Jamieson Drive Welshpool WA 6106 T: 1300 888 853 F: +61 8 6253 3710 NEW ZEALAND Regal Beloit New Zealand Ltd AUCKLAND 18 Jomac Place Avondale T: 0 676 722 F: +64 9 820 8504 ROTORUA 91 Tallyho Street Rotorua T: 0 676 722 F: +64 7 347 8629 MALAYSIA Torin Industries SND BHD (MALAYSIA) No. 6536A Jalan Bukit Kemuning Batu 6 Seksyen 34 40470 Shah Alam Selangor T: +60 3 5124 6157 F: +60 3 5121 1467 SINGAPORE Regal Beloit South East Asia Pte. Ltd. 12 Tuas Loop 637346 SINGAPORE T: +65 6863 3473 F: +65 6863 3476 THAILAND FASCO Motors (Thailand) Limited 29/7-8 Bangkruay-Sainoi Road Bangkrang Muang Nonthaburi District Nonthaburi 1 THAILAND T: +66 2447 3300 F: +66 2447 3 APPLICATION CONSIDERATIONS The proper selection and application of air system products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application information included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal Beloit Australia Pty Ltd and its affiliates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer s risk. For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty and Limitation of Liability, please contact Customer Service at 1300 888 853 or visit www.regalaustralia.com.au. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit Australia Pty Ltd product referred to herein, including any person who buys from a licensed distributor of these branded products. Regal, Genteq, Marathon, Marathon Drives and Unico are trademarks of Regal Beloit Corporation or one of its affiliated companies. 2017 Regal Beloit Australia Pty Ltd, All Rights Reserved. MCC16072E G0008 r5 Created in AU