Reliable backwater protection Protection from backwater
Backwater Protection - things you need to know Prevention Not properly protecting a building against backwater can result in damage that is extremely expensive to repair. As a preventative measure, all open fixtures (shower, floor drain, sink, toilet, clothes washer) located below ground level in a building should be equipped with a properly specified and installed KESSEL backwater valve. Taking preventative action is very inexpensive and assures that a building is protected against the costly affects of backwater damage. How it works A backwater valve is an item installed within the wastewater drainage pipe of a building. During normal conditions the valve allows wastewater being drained from the building to pass through it, but in the case of heavy rains, flooding or a blocked pipe, the backwater valve will prevent storm or floodwater from backing up in the drainage pipe and flooding the lower areas of the building. KESSEL stands for quality All KESSEL backwater valves Type 0 thru 5 are manufactured to the EN norms and also have passed strict internal KESSEL quality assurance standards which require the valves to perform to requirements unmatched in the drainage business. Which Staufix do you need? Depending on the type of installation there are various KESSEL backwater products to choose from. Check your country's EN 13564 backwater valve requirements for what type of valve is certified for use in your situation. In the case that this information is not available in your area, please contact KESSEL directly and we will glad to recommend a product best matching your needs. KESSEL offers a complete line of fully certified backwater valves from Type 0 thru Type 5. For in-line wastwater pipes Type 0 KESSEL Staufix 71... Series Type 1 KESSEL Staufix 72... and Eurofix-Clausio Type 2 KESSEL Staufix 73... and SWA Type 3 KESSEL Staufix FKA, Pumpfix F For floor drains Type 4 KESSEL Single flap floor drains Type 5 KESSEL Pumpfix S, Drehfix, Universal, Volatile liquid traps Protection for your entire basement Protects against backwater flooding from main sewer! Protects against rodents entering through pipes! R 2 Catalog 2009
Backwater protection for interior installation Ideal for waterproof concrete Catalog 2009 R 3
Pumpfix F backwater valve according to EN 12056 for installation in a concrete slab/floor KESSEL Pumpfix F backwater valve made of polymer For installation in a concrete slab/floor for installation depth (D) from 370-550 mm Installation kit with choice of cover plate black cover recessed cover (Tiles can be laid on-site in the cover plate). Backwater pumping station according to EN 13564 Type 3 with pump (1kW/230V) and backwater valve, use of pump when water backs up. Control unit and alarm, Protection type IP 54, with integrated self diagnosis system SDS and battery back-up, pump is rated submersible, protection type IP 68 (3 m, 24 h). Cable length: 5 m (15 m available on request) Weight approx. 25 kg. Certification no. Z-53.2-388 With black cover: With recessed cover for on-site tiling: Ideal waterproof concrete for 28100S 28125S 28150S 28100X 28125X 28150X D Installation area 650 x 650 mm L: 545 mm H: 262 mm L: 555 mm H: 255 mm L: 585 mm H: 238 mm Accessories: Page R 8 Pumpfix F backwater valve according to EN 12056 for installation in an exposed wastewater pipe L: 545 mm H: 343 mm L: 555 mm H: 343 mm L: 585 mm H: 343 mm KESSEL Pumpfix F backwater valve made of polymer For installation in an exposed wastewater pipe Backwater pumping station according to EN 13564 Type 3 with pump (1kW/230V) and backwater valve, use of pump when water backs up. Control unit and alarm, Protection type IP 54, with integrated self diagnosis system SDS and battery back-up, pump is rated submersible, protection type IP 68 (3 m, 24 h). With protective cover. Cable length: 5 m (15 m available on request) Weight approx. 20 kg. Max. pumping capacity (m 3 /h) Max. pumping capacity (l/ s) Backwater height H (mws) 10 9 8 7 6 5 4 3 2 1 Backwater height H (mws) 0 0.0 0.0 9.0 3.0 0.8 8.0 5.0 1.4 7.0 6.5 1.8 6.0 Backwater pressure from the drain Pump pressure 7.8 2.1 5.0 1 2 3 4 5 6 7 8 9 Pumping capacity Q (m 3 /h) 28100 28125 28150 Certification no. Z-53.2-388 Accessories: Page R 8 9.0 2.5 4.0 0 0,5 1 1,5 2 2,5 Pumping capacity Q (l/ s) 10.0 2.8 3.0 10 R 4 Catalog 2009
Staufix FKA backwater valve according to EN 12056 for installation in a concrete slab/floor D KESSEL Staufix FKA backwater valve made of polymer For installation in a concrete slab/floor for installation depth (D) from 370-550 mm With telescopic extension section for continuous height and level adjustment, surface water tight cover plate Class A 15 made of polymer. Backwater valve according to EN 13564 Type 3 with two open flaps. Control unit and alarm, Protection type IP 54, with integrated self diagnosis system SDS and battery back-up, motor is rated submersible, Protection Type IP 68 (3 m, 24 h). Installation kit with choice of cover plate black cover recessed cover (Tiles can be laid on-site in the cover plate). Cable length: 5 m (15 m available on request) Weight approx. 17 kg. With black cover: With recessed cover for on-site tiling: Ideal waterproof concrete for 83100S 83125S 83150S 83100X 83125X 83150X EN 13564 Type 3 F Installation area 650 x 650 mm L: 545 mm H: 262 mm L: 555 mm H: 255 mm L: 585 mm H: 238 mm Accessories/Conversion kits: Page R 8 Staufix FKA backwater valve according to EN 12056 for installation in an exposed wastewater pipe KESSEL Staufix FKA backwater valve made of polymer For installation in an exposed wastewater pipe With protective cover. Backwater valve according to EN 13564 Type 3 with two open flaps. Control unit and alarm, Protection type IP 54, with integrated self diagnosis system SDS and battery back-up, motor is rated submersible, Protection Type IP 68 (3 m, 24 h). Cable length: 5 m / 15 m Weight approx. 10 kg. EN 13564 Type 3 F Cable length: 5 m Cable length: 15 m 83100 83125 83150 83100 U1 83125 U1 83150 U1 L: 545 mm H: 343 mm L: 555 mm H: 343 mm L: 585 mm H: 343 mm Accessories/Conversion kits: Page R 8 Catalog 2009 R 5
Staufix SWA backwater valve according to EN 12056 for installation in a concrete slab/floor D KESSEL Staufix SWA backwater valve made of polymer, Ø... For installation in a concrete slab/floor for installation depth (D) from 370-550 mm With telescopic extension section for continuous height and level adjustment, surface water tight cover plate Class A 15 made of polymer. Backwater flap valve according to EN 13564 Type 2 with two self-closing flaps, one of which can be locked by hand as an emergency closure. Installation kit with choice of cover plate black cover recessed cover (Tiles can be laid on-site in the cover plate). Weight approx. 15 kg. EN 13564 Type 2 With black cover: With recessed cover for on-site tiling: Ideal waterproof concrete for 73100.10S 73125.10S 73150.10S 73100.10X 73125.10X 73150.10X Installation area 650 x 650 mm L: 545 mm H: 262 mm L: 555 mm H: 255 mm L: 585 mm H: 238 mm Accessories/Conversion kits: Page R 8 Staufix SWA backwater valve according to EN 12056 for installation in an exposed wastewater pipe KESSEL Staufix SWA backwater valve made of polymer, Ø... For installation in an exposed wastewater pipe With protective cover made of polymer. Backwater flap valve according to EN 13564 Type 2 with two selfclosing flaps, one of which can be locked by hand as an emergency closure. Weight approx. 8 kg. EN 13564 Type 2 73100.10 73125.10 73150.10 L: 545 mm H: 343 mm L: 555 mm H: 343 mm L: 585 mm H: 343 mm Accessories/Conversion kits: Page R 8 R 6 Catalog 2009
Controlfix clean out according to EN 12056 for installation in a concrete slab/floor KESSEL Controlfix clean out made of polymer, Ø... For installation in a concrete slab/floor for installation depth (D) from 370-550 mm With telescopic extension section for continuous height and level adjustment, surface water tight cover plate Class A 15 made of polymer. Installation kit with choice of cover plate black cover recessed cover (Tiles can be laid on-site in the cover plate). Weight approx. 11 kg. With black cover: With recessed cover for on-site tiling: Ideal waterproof concrete for 80100S 80125S 80150S 80100X 80125X 80150X D Installation area 650 x 650 mm L: 545 mm H: 262 mm L: 555 mm H: 255 mm L: 585 mm H: 238 mm Accessories/Conversion kits: Page R 8 Controlfix clean out according to EN 12056 for installation in an exposed wastewater pipe H 425 x 305 25 KESSEL Controlfix clean out made of polymer, Ø... For installation in an exposed wastewater pipe With protective cover. Weight approx. 4 kg. 80100 80125 80150 L L: 545 mm H: 343 mm L: 555 mm H: 343 mm L: 585 mm H: 343 mm Accessories/Conversion kits: Page R 8 Catalog 2009 R 7
Accessories Reliable backwater protection 10 590 414 180 40 230 Gasket set for installation in waterproof concrete consisting of: Counter flange made of polymer, incl. screws, elastomer waterproof membrane in NK/SBR Ø 800 mm max. ground water level 3 m Extension section with flange made of polymer, H = 180 mm, incl. gasket For gasket set 83 023 Potential-free contact Change-over contact 42 V / 0.5 A; Additional circuit board with a potential-free contact e.g. for connecting control unit to BMS (Building Management System). Audible alarm Electronic audible alarm (continuous tone) with connection cable 20 m Minimum current consumption 5-25 ma, audible tone 4.7 KHz - 90 db, large voltage range 6-24 V DC; Dimension Ø 31 x 15 mm. Ideal waterproof concrete for - 83023-83071 - 80072-20162 Conversion kit Pumpfix F For conversion to Pumpfix F backwater valve. With 15 m cable length: 205-091 205-092 205-093 Conversion kit Staufix FKA For conversion to Staufix FKA backwater valve. With 15 m cable length: 80083 80082 80082 Easy conversion! Conversion kits available for the Pumpfix F, Staufix FKA and the Staufix SWA backwater valves. Conversion kit Staufix SWA For conversion from Controlfix clean out to Staufix SWA backwater valve. Conversion kit Pumpfix F Conversion kit Staufix FKA 80095 80095 80095 Conversion kit Staufix SWA R 8 Catalog 2009
Staufix backwater valves according to EN 12056 H AxB L KESSEL Staufix twin flap backwater valve with emergency closure made of polymer, Ø... Twin flaps, self-closing, one of which can be locked by hand as an emergency closure. Inlet/outlet for connection to PVC pipe according to DIN 19534. Ø 200 Installation area 650 x 300 mm EN 13564 Type 2 L: 355 H: 180 + 25 A x B: 205 x 155 mm L: 405 H: 240 + 40 A x B: 270 x 200 mm L: 450 H: 240 + 40 A x B: 270 x 200 mm L: 530 H: 278 + 50 A x B: 353 x 248 mm With 2 polymer flaps: Ø 200 With 1 polymer flap and 1 stainless steel flap (Rodent protection): 73100 73125 73150 73200 73100R 73125R 73150R KESSEL Staufix single flap backwater valve with emergency closure made of polymer, Ø... Flap self-closing and can be locked by hand as an emergency closure. Inlet/outlet for connection to PVC pipe according to DIN 19534. With 1 polymer flap: Ø 100 Ø 200 77100 72100 72125 72150 72200 H AxB Ø 100 Ø 200 L: 355 H: 180 + 25 A x B: 205 x 155 mm L: 355 H: 180 + 25 A x B: 205 x 155 mm L: 405 H: 240 + 40 A x B: 270 x 200 mm L: 450 H: 240 + 40 A x B: 270 x 200 mm L: 530 H: 278 + 50 A x B: 353 x 248 mm With 1 stainless steel flap (Rodent protection): 72100R 72125R 72150R L Installation area 650 x 300 mm EN 13564 Type 1 AxB H L Installation area 650 x 300 mm KESSEL Staufix single flap backwater valve made of polymer, Ø... Flap self-closing. Inlet/outlet for connection to PVC pipe according to DIN 19534. Ø 100 Ø 200 L: 355 H: 170 A x B: 205 x 155 mm L: 355 H: 170 A x B: 205 x 155 mm L: 405 H: 230 A x B: 270 x 200 mm L: 450 H: 230 A x B: 270 x 200 mm L: 530 H: 278 A x B: 353 x 248 mm EN 13564 Type 0 Ø 100 Ø 200 76100 71100 71125 71150 71200 Catalog 2009 R 9
Staufix Ø 50 / Ø 75 twin flap backwater valves / Staufix Siphon Ø 50 according to EN 12056 H 97x80 AxB L Ø 50 L: 196 mm H: 80 mm AxB: 97 x 80 mm Ø 75 L: 285 mm H: 150 mm AxB: 175 x 120 mm 50 KESSEL Backwater twin flap valve Staufix Ø... for exposed wastewater pipes made of polymer. Twin flaps, self-closing, one of which can be locked by hand as an emergency closure. Inlet/outlet for connection to HT-pipe according to DIN 19560. EN 13564 Type 2 KESSEL Backwater twin flap valve Staufix Siphon Ø 50 for washing stand siphons for wastewater, made of polymer. Twin flaps, self-closing, one of which can be locked by hand as an emergency closure, incl. wall attachment, inlet connection Ø 40 (1 1 /2 inch) at pipe odour trap. Outlet Ø 50 for connection to HT-pipe according to DIN 19560. Ø 50 73050 Ø 75 73070 Ø 50 73051 40 183 EN 13564 Type 5 170-310 1 1 /2 / 1 1 /4 97x80 85 120 KESSEL Backwater twin flap valve Staufix Siphon Ø 50 Model with pipe odour trap and washing machine connection for wastewater, made of polymer. Twin flaps, self-closing, one of which can be locked by hand as an emergency closure, incl. wall attachment, outlet Ø 50 for connection to HT-pipe according to DIN 19560. Ø 50 73052 80 150 170-370 97x80 85 80 150 120 EN 13564 Type 5 KESSEL Backwater twin flap valve Staufix Siphon Ø 50 Model with pipe odour trap and inlet funnel, ideal for the emergency overflow of heating systems, made of polymer. Two flaps, self-closing, one of which can be locked by hand as an emergency closure, incl. wall attachment. Outlet Ø 50 for connection to an HT-pipe according to DIN 19560. EN 13564 Type 5 Ø 50 73053 R 10 Catalog 2009
Staufix Ø 50 / Ø 75 twin flap backwater valves / Staufix Siphon Ø 50 according to EN 12056 KESSEL - typical advantages For exposed wastewater pipes Ø 50, Ø 75 The little backwater valve with the big Staufix name Preventative backwater protection in new construction also excellent for renovation Quick and easy installation Also prevents flooding from additional wastewater drainage pipes connected to same drainage system Also used as rodent / insect protection Optimal pipe access / cleaning For washing stand siphons Tool free maintenance One of a kind Locking lever can be installed on either side (Ø 50) Staufix Siphon Ø 50 wall mounted 80 80 80 80 Model with pipe odour trap and washing machine connection Model with inlet funnel, ideal for emergency overflow of heating systems Catalog 2009 R 11
Backwater flap valves according to DIN 12056 AxB H KESSEL Multitube single flap backwater valve for wastewater made of polymer Flap self-closing. Dimensions in mm: Ø 260 H: 485 L: 730 A x B: 680 x 440 Ø 320 H: 490 L: 840 A x B: 530 x 460 Ø 400 H: 605 L: 990 A x B: 655 x 590 Ø 510 H: 670 L: 1245 A x B: 960 x 710 with connection couplings*. Connection couplings allow connection to pipes with the following outer diameters: Ø 250: 250-275 mm Ø 500: 495-525 mm Ø 300: 310-335 mm Ø 400: 385-410 mm EN 13564 Type 0 Ø 260 Ø 320 Ø 400 Ø 510 71250 71300 71400 71500 L KESSEL Pipe flap valve for wastewater made of polymer Flap self-closing. Inlet/outlet for connection to PVC pipe according to DIN 19534. Ø 200 79100 79125 79150 79200 Ø 200 L: 120 mm L: 136 mm L: 142 mm L: 170 mm EN 13564 Type 0 H L B2 B1 KESSEL Pipe flap valve for wastewater made of polymer Flap self-closing. Dimensions in mm: Ø 250 H: 400 L: 220 B1: 345 B2: 280 Ø 315 H: 450 L: 360 B1: 400 B2: 410 without connection coupling, connection according to DIN 19534 Ø 400 H: 540 L: 390 B1: 485 B2: 495 Ø 515 H: 680 L: 500 B1: 590 B2: 620 Ø 600 H: 770 L: 530 B1: 730 B2: 730 with connection coupling*. Connection couplings allow connection to pipes with the following outer diameters: Ø 400: 385-410 mm Ø 500: 495-525 mm Ø 600: 590-620 mm Ø 250 Ø 315 Ø 400 Ø 515 79250 79300 79400 79500 Ø 600 79600 Other diameters available on request EN 13564 Type 0 *With connection couplings it is possible to connect pipes of different diameters. Compensating rings are necessary where the difference in outer diameter is > 12 mm. Rights reserved for technical changes R 12 Catalog 2009
Backwater protection for exterior installation Catalog 2009 R 13
Backwater inspection chamber and Backwater inspection chamber GT Ø 1000 according to EN 752 for underground installation Standard cover on-site Accessories: 860 122 / 860 116 Inspection chamber including 300 kg load class temporary construction debris cover from 50 to 550 mm Chamber height H 1 to H 5 Installation depths D from 1275 to 3540 mm possible Installation depths D for backwater chamber GT +175 mm KESSEL Backwater inspection chamber and Backwater inspection chamber GT Ø 1000 Polyethylene construction, open channel flow /200 For underground installation Inspection chamber height H =..... mm in monolithic structure, water-tight, resistant to aggressive wastewater, with integrated access steps, with telescopic height adjustable protection cover made of polymer for use during construction (can be used as a cover in green areas). Order extension section/cover separately as accessories, see Chapter Inspection Chambers Page R 18. With open channel x 3, two lateral inlets /200, backwater inlet connection with clean-out opening, outlet /200. Inlet/outlet with spigot end to the connection for PVC pipe /200 according to DIN 19534 and PE-HD-pipe /200 according to DIN 19537. Can be retrofitted with backwater flap valve Type KESSEL-Pumpfix F, KESSEL-Staufix FKA or KESSEL-Staufix SWA. Note: Cable piping to be provided. Total installation depth D:..... mm 550 756 333 Certification no. Z-42.1-333 Channel types: Flow direction Chamber height H 1 H 2 H 3 H 4 H 5 Backwater chamber /200 1100 mm 881 004 1600 mm 881 504 2100 mm 882 004 2600 mm 882 504 3100 mm 883 004 Chamber Backwater chamber GT height /200 H 1 H 2 H 3 H 4 H 5 1275 mm 1775 mm 2275 mm 2775 mm 3275 mm 8801004 8801504 8802004 8802504 8803004 Ordering Scheme, extension sections, covers and gaskets see Page R 18 Extension section with cover plate Extension section for manhole cover Accessories Illustration 1 2 3 4 5 6 Conversion kit Pumpfix F For conversion to the backwater inspection chamber with Pumpfix F backwater valve. Conversion kit Staufix FKA For conversion to the backwater inspection chamber with Staufix FKA backwater valve. Conversion kit Staufix SWA For conversion to the backwater inspection chamber with Staufix SWA backwater valve. 1 2 Pipe sealing gasket KG-collar plug 3 Twin collar 4 HT-collar plug 5 Cable connections 6 Retaining clip with screws With 15 m cable length: 205-093 With 15 m cable length: 80082 80095 Cable piping gasket set 85410 R 14 Catalog 2009
Backwater inspection chamber and Backwater inspection chamber GT Ø 1000 according to EN 752 for underground installation Installation suggestion KESSEL - typical advantages Underground backwater protection between building and main sewer. Variable extension section as accessory inclinable height adjustable NEW The backwater inspection chamber is now also available in the version GT Re-enforced chamber handles up to 2.5 meters of groundwater. Additional lift protection The backwater inspection chamber GT is provided in the lower region with an additional lift-protection ring (with contact surfaces for spirit levels). Conversion kits: Pumpfix F backwater valve with 15 m cable 205-093 Advanced safety The safety access steps in the backwater inspection chamber are included with the GT chamber. The safety access steps in corrosion-resistant PE-HD in yellow signal colour prevent slipping and can be gripped for a safer hold when negotiating the chamber. Safer entry and exit - additional access steps in the tapering area. Staufix FKA backwater valve with 15 m cable 80 082 Staufix SWA backwater valve 80 095 For the purpose of retrofitting a KESSEL backwater unit at a later date a cable piping in KG is fitted at the time of installation. Cable pipe gasket Art.# 85 410 Three standard connection options for cellar drains, roof gutters, drainage etc. Cellar outlet Drainage above the backwater level Clean-out opening can be retrofitted Roof drainage with backwater Outlet to drain protection Catalog 2009 R 15
Controlfix clean out in the Komfort-Inspection chamber System Ø 800 and Ø 1000 according to EN 752 for underground installation Variable extension section: inclinable height adjustable Vehicle traffic proof Illustration KESSEL Controlfix clean out in the KESSEL-Komfort inspection chamber Ø... Polyethylene construction, for underground installation Installation depth (D) from... mm to... mm Inclusive integrated access steps (with Ø 1000), water-tight, resistant to aggressive wastewater. Extension section made of polymer for continuous height and level adjustment. Optional cover plate class... in cast iron according to EN 124, surface water tight, incl. cover removal tool. Continuous pipe Ø... with cleaning pipe according to EN 13564. Inlets with outer collar, outlet with spigot end for PVC pipe according to DIN 19534 and PE-HD pipe according to DIN 19537. Conversion center inlet pipe to bottom inlet pipe: : Installation depth D + 55 mm : Installation depth D + 62.5 mm : Installation depth D + 80 mm Delivery: Inspection chamber in components (bottom parts stackable) for on-site assembly incl. assembly system. Accessories: see Page R 18 Illustration Accessories Conversion kit Pumpfix F For conversion to the Komfort inspection chamber with Pumpfix F backwater valve. With 15 m cable length: 205-091 205-092 205-093 1 2 3 4 5 6 Conversion kit Staufix FKA For conversion to the Komfort inspection chamber with Staufix FKA backwater valve. Conversion kit Staufix SWA For conversion to the Komfort inspection chamber with Staufix SWA backwater valve. 1 2 Pipe sealing gasket KG-collar plug 3 Twin collar 4 HT-collar plug 5 Cable connections 6 Retaining clip with screws With 15 m cable length: 80083 80082 80082 80095 80095 80095 Cable piping gasket set 85410 Further installation depths (Ø 1000) up to a max. installation depth of 5 m can be assembled individually using the accessory parts, see inspection chambers sides S 18/19. Cable piping is provided to enable subsequent retrofit (Set 85 410). R 16 Catalog 2009
Controlfix clean out in the Komfort-Inspection chamber System Ø 800 and Ø 1000 according to EN 752 for underground installation Channel types Channel example Ø 1000 Channel example Ø 1000 Channel example Ø 1000 Channel example Ø 1000 Installation depth D in mm 1 Continuous pipe: D 1: 770-1270 mm D 2: 1270-1770 mm D 3: 1770-2270 mm D 4: 2270-2770 mm D 5: 2770-3270 mm Ø 800 Ø* Class A/B Class D 842 101 B 842 101 D 842 102 B 842 102 D 842 103 B 842 103 D 842 111 B 842 111 D 842 112 B 842 112 D 842 113 B 842 113 D 842 121 B 842 121 D 842 122 B 842 122 D 842 123 B 842 123 D 842 131 B 842 131 D 842 132 B 842 132 D 842 133 B 842 133 D 842 141 B 842 142 B 842 143 B 842 141 D 842 142 D 842 143 D Installation depth D in mm 1 2 3 4 Ø 1000 Ø* Continuous pipe (Ø 200 on request): D 1: 950-1450 mm D 2: 1450-1950 mm D 3: 1950-2450 mm D 4: 2450-2950 mm D 5: 2950-3450 mm Single inlet in flow direction right 90 : D 1: 950-1450 mm D 2: 1450-1950 mm D 3: 1950-2450 mm D 4: 2450-2950 mm D 5: 2950-3450 mm Single inlet in flow direction left 90 : D 1: 950-1450 mm D 2: 1450-1950 mm D 3: 1950-2450 mm D 4: 2450-2950 mm D 5: 2950-3450 mm Class A/B Class D 862 101 B 862 101 D 862 102 B 862 102 D 862 103 B 862 103 D 862 111 B 862 111 D 862 112 B 862 112 D 862 113 B 862 113 D 862 121 B 842 121 D 862 122 B 862 122 D 862 123 B 862 123 D 862 131 B 862 131 D 862 132 B 862 132 D 862 133 B 862 133 D 862 141 B 862 142 B 862 143 B 862 201 B 862 202 B 862 203 B 862 211 B 862 212 B 862 213 B 862 221 B 862 222 B 862 223 B 862 231 B 862 232 B 862 233 B 862 241 B 862 242 B 862 243 B 862 301 B 862 302 B 862 303 B 862 311 B 862 312 B 862 313 B 862 321 B 862 322 B 862 323 B 862 331 B 862 332 B 862 333 B 862 341 B 862 342 B 862 343 B Twin inlets in flow direction left + right 90 : D 1: 950-1450 mm D 2: 1450-1950 mm D 3: 1950-2450 mm D 4: 2450-2950 mm D 5: 2950-3450 mm 862 401 B 862 402 B 862 403 B 862 411 B 862 412 B 862 413 B 862 421 B 862 422 B 862 423 B 862 431 B 862 432 B 862 433 B 862 441 B 862 442 B 862 443 B 862 141 D 862 142 D 862 143 D 862 201 D 862 202 D 862 203 D 862 211 D 862 212 D 862 213 D 862 221 D 862 222 D 862 223 D 862 231 D 862 232 D 862 233 D 862 241 D 862 242 D 862 243 D 862 301 D 862 302 D 862 303 D 862 311 D 862 312 D 862 313 D 862 321 D 862 322 D 862 323 D 862 331 D 862 332 D 862 333 D 862 341 D 862 342 D 862 343 D 862 401 D 862 402 D 862 403 D 862 411 D 862 412 D 862 413 D 862 421 D 862422 D 862 423 D 862 431 D 862 432 D 862 433 D 862 441 D 862 442 D 862 443 D * Ø = Outer Diameter Catalog 2009 R 17
Accessories KESSEL Extension section made of polymer for standard concrete rings/manhole covers for load classes B/D Complete KESSEL extension section made of polymer for load classes B/D Standard manhole cover Further assembly possible using additional concrete rings Class B: H = 125 mm Class D: H = 160 mm Standard bearing ring (anti-slip; AR-V) H = 30, 50, 100, 120... mm Article Extension section made of polymer for standard bearing ring/ manhole covers can be assembled using standard concrete rings; telescopic height adjustable from 50 to 280 mm 860 122 telescopic height adjustable from 50 to 550 mm 860 125 Article Cover plate in cast iron with ventilation, Class B* Class D, locked Cover plate in cast iron Class B* Cover plate in cast iron Class B, locked Class D, locked 860 135 860 137 Sludge bucket 860 115 not suitable for extension section 860141 860 131 860 133 860 136 Article Extension section made of 860 120 polymer with clamping ring, telescopic height adjustable from 100 to 550 mm, for cover Class B/D, with cut-outs for a sludge bucket Extension section made of 860 121 polymer with clamping ring, telescopic height adjustable from 100 to 550 mm, for cover Class B Extension section made of polymer with clamping ring, telescopic height adjustable from 100 to 550 mm, for cover in cast iron with insertion depth 50 mm, for surface water tight covers, unlocked 860 141 Article Lip gasket Ø 600 860 116 Calculation for installation depth D Inspection chamber height H 1 to H 5 Height of extension section from 50-280 mm (50-550 mm) Height of concrete ring/ manhole cover Article Lip gasket Ø 600 860 116 Calculation for installation depth D Inspection chamber height H 1 to H 5 Height of extension section from 100 to 550 mm Cover plate * cover plate in cast iron and concrete R 18 Catalog 2009