SWB505 MultiMount EN90 Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate and reliable tank weighing. Standard lift-off bolt copes with tipping forces while vertical safety down-stop provides additional safety. Conveyors and Mixers Weigh modules are also designed for dynamic-loading applications such as conveyors, mixers and blenders. SWB505 MultiMount provides 360 checking for ease of installation and maximum safety. The rocker pin restores the top plate to its ideal position to maintain accurate, repeatable weight. Load Cell Load cells have a rocker pin design that automati cally aligns load forces for accurate weighing. These hermetically sealed load cells are rated IP68 and can be used in all environments. The load cells are easy to inspect or replace. Stabilizers Up to two optional stabilizers can be applied to each weigh module to stabilize a scale subject to heavy vibration, high torque, or in-motion weighing. With stabilizers installed, thermal expansion is still possible, guaranteeing the best weighing performance. SWB505 MultiMount SWB505 MultiMount TM EN90 Right the First Time SWB505 MultiMount features ensure correct scale system installation, right from the start. Weigh modules do not compromise on safety all safety features are built-in. The rocker pin design provides the highest level of weighing accuracy. Service features, including SafeLock provide easy and trouble free installation. Features: Integrated lift-off protection Vertical safety down-stop Full 360 integrated checking Ground strap welding protection SafeLock Weigh module locked for installation SafeLock Load cell protected for installation Dual stabilizer option All load cells with IP68 / IP69K and fully stainless steel Global approvals standard on each load cell OIML C3/NTEP or OIML C6/NTEP III M n: Zinc plated or stainless steel mounting hardware CalFree : Calibration without test weights EN90 conformity
SWB505 MultiMount EN90 Specifications Weigh Module Weigh Module Model No. unit of measure Specification SWB505 MultiMount EN90 Size 3 Rated Capacity Max. Rated Forces ) Max. Compressive Force, Rated Max. Horizontal Force, Rated longitudinal kg (lb, nominal) kn (lb) 5 () 0.05 () () 0. () 0 (44) 0. (44) 30 0.3 50 () 0.5 () 0 (0) (0) 00 (440) (440) 300 (660) 3 (660) (50). (50) 0 (500). (500) 550 (50) 5.4 (50) kn (lb) 4.5 () 7.5 (685) Max. Uplift Force, Rated kn (lb) 5.5 (30) 6 (3600) Max. horizontal force (longitudinal) kn (lb).5 (675) 5 (0) per stabilizer option, Rated 7) ) 4) Max. Yield Forces Max. Compressiv Force, Yield Max. Horizontal Force, Yield longitudinal kn (lb) 0.074 (6.5) 0.5 (33) 0.9 0.44 (99) 0.74 (65).47 (330).94 (660) 4.4 (990).6 (375) 3. (750) 8. (875) kn (lb) 6.6 (480) 9.8 (00) Max. Uplift Force, Yield kn (lb) 7.7 (730) (4950) 3) 4) Max. Ultimate Forces Max. Compressiv Force, Ultimate 5) kn (lb) 65 (4600) 90 (0000) Max. Horizontal Force, Ultimate longitudinal kn (lb) 7 (3800) 4 (9400) Max. Uplift Force, Ultimate kn (lb) (4590) 50 (00) Restoring Force Max. top plate travel longitudinal 8) Weight (including load cell), nominal Material Finish EN90 approval %A.L./mm 7.4 (90) 4.4 () (../in) 6) ± mm (in).5 (0.) 3 (0.) kg (lb) 4 (8.8) 6.6 (4.5) carbon steel / 304 stainless steel / 36 stainless steel Zinc Plated / Electropolished / Electropolished Yes, execution class EXC 0 (500).8 (500) 6. (3750) 00.6 3.3 (50) 7 (5.4) 4400 (000) 43. (000) 5 (3370). 7.4 (660) 50 (00) (4950) 34 (7640) 50 (33000) 48 (750) 55 (350) ) The weigh module is rated for these forces in normal operation, a Factor of Safety has been applied by Mettler Toledo. ) Warning: if loaded statically one time in excess of these forces, the weigh module may yield and need replacing. The Max. Yield Forces do not consider fatigue/cyclic loading and should be approached only in exceptional circumstances. 3) Warning: if loaded statically one time in excess of these forces, the weigh module may break with potential for serious injury and/or property damage. 4) Warning: apply a Factor of Safety appropriate to the application. 5) The top plate will travel downwards by 5 mm (0. inches) before the down-stop engages and this ultimate force can be developed. 6) % of Applied Load (A.L.) per mm (in) displacement of the top plate ( & longitudinal). 7) or per weigh module. Max permissible longitudinal force per stabilizer. 8) 0 with Stabilizer. 5.5 (40) 3.5 (0.4) 5.4 (34) METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
SWB505 MultiMount EN90 Specifications Load Cell Load Cell unit of measure Specification 0.03% 30979 0.05% 709934 C3 / III s n:3 / 70964 70556 70557 70558 70559 70560 C3 / 300946 300950 300954 30039033 30094400 C6 307 307 3073 3074 3075 C6 / III M n: 300947 30095 300955 30039034 3009440 Model No. MTB 0745A Rated Capacity (R.C.) Rated Output kg (lb, nominal) mv/v @R.C.-kg mv/v @R.C.-lb 5 () () 0 (44) 30 ± 0.% 50 () 0 (0) 00 (44) 300 (50) 0.970 ± 0.%.000 ± 0.% 0 (500) 550 (50) 0 (500).940 ± 0.%.000 ± 0.% Combined Error 9) ) %R.C. C3: 0.08 / C6: 0.0 0.03 C3: 0.08 / C6: 0.0 Temperature Effect on Temperature Range OIML / European Approval ) NTEP Approval ) ATEX Approval ) IECEx Approval ) Factory Mutual Approval ) Excitation Voltage Terminal Resistance Min. Dead load Output Sensitivity ) Compensated %R.C./ C (../ F) %A.L./ C (../ F) C3: 0.00 (0.0006) / C6: 0.00 (0.0006) C3: 0.00 (0.0006) / C6: 0.0005 (0.0003) 0.007 (0.005) 0.004 (0.0008) 00 C3: 0.003 (0.0007) / C6: 0.003 (0.0007) C3: 0.00 (0.0006) / C6: 0.0005 (0.0003) - ~ +40 (+4 ~ +4) - to +40 (+4 to +4) Operating C ( F) -40 ~ +65 (-40 ~ +50) -40 to +65 (-40 to +50) Safe Storage -40 ~ +80 (-40 ~ +76) -40 to +80 (-40 to +76) Class C3 C6 C3 / C6 nmax 3000 6000 3000 / 6000 3000 / 6000 Y 000 00 Class III S / III M C3 / C6 III M / III M nmax 3000 / 5000 5000 / 000 0.4 0.7 Vmin kg (lb) R.C./000 0.0 0.056 (0.5) Rating II G Ex ib IIC T4 / II D ibd IP6X T35 C II 3 G Ex na II T4 / II 3 G Ex nl IIC T4 / II 3 D Ex td A IP6X T35 C II G Ex ia IIC T4 Gb / II D Ex ia IIIC T0 C Db II 3 G Ex ic IIC T4 Gc / II 3 G Ex na IIC T4 Gc / II 3 D Ex tc IIIC T0 C Dc Number IECEx DEK 6.003X IECEx DEK 5.007 Rating Entity Parameters Rating, USA Rating, Canada Ex ib IIC T4 Gb / Ex ib IIIC T35 C Db / Ex ic IIC T4 Gc / Ex na IIC T4 Gc / Ex tc IIIC T35 C Dc Ui = 5V, li = 600mA, Pi =.5W, Ci = 0.nF/m, Li = µh/m / Un = 5V IS / I, II, III / / ABCDEFG / T4 NI / I / / ABCD / T6 / S / II, III / / FG / T6 4400 (000) 0.454 (.0) Ex ia IIC T4 Gb / Ex ia IIIC T0 C DbEx ic IIC T4 Gc / Ex na IIC T4 Gc / Ex tc IIIC T0 C Dc Ui = 5V, Ii = 600mA, Pi =.5W, Ci = 5nF, Li = 30µH / Un = 5V, Ci = 5 nf IS / I, II, III / / ABCDEFG / T4 NI / I / / ABCD / T6 / S / II, III / / FG / T6 IS / I, II, III / / ABCDEFG /T4 IS / I, II, III / / ABCDEFG /T4 NI / I / / ABCD / T6 / DIP / II, III / / FG / T6 NI / I / / ABCD / T6 / DIP / II, III / / FG / T6 Recommended 5~5 C3: 5~5 / C6: 5~ V AC/DC Max. 0 5 Excitation 383 384 ± Ω Output 350 ± 350 ± Material Spring Element stainless steel stainless steel Protection Type welded welded IP Rating IP 68, IP69K IP 68, IP69K NEMA Rating NEMA 6/6P NEMA 6/6P Weight, nominal kg (lb) 0.6 (.3) 0.9 () Cable Length Lenght m (ft) 3 (9.8) / 5 (6.4).3 (.9) PU: (6.6), 3 (9.8), 5 (6.4), (3.8) / FEP: 3 (9.8), 5 (6.4), (3.8) Diameter mm (in) 5.8 (0.3) PU: 5. (0.) / FEP: 5.3 (0.) 9) Error due to the combined effect of non-linearity and hysteresis. ) Typical values only. The sum of errors due to Combined Error and Temperature Effect on Sensitivity comply with the requirements of OIML R60 and NIST HB44. ) See certificate for complete information. (4.4) 3 METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
SWB505 MultiMount EN90 Weigh Module Dimensions mm [in] Size Capacity Locations and Dimensions D H H H H3 L L L L3 L4 L5 L6 W W W W3 W4 3 5 kg 300 kg ( lb 600 lb) kg. t (50 lb.5 klb). (0.44). t (5 klb) 4.4 t ( klb) 7.5 (0.69) 83 (3.3) 5. (4.4) 36.6 (5.38).7 9. (0.75) 5.4 8 (0.3).7 9. (0.75) 4.0 (.6) 65 (6.5) 50.9 (.00) 77.9 (7.00) 5.3 (.0) 70.3 (.77) 35.0 (9.5) (4.0) 4.4 (4.50) 5.4.7 5.4 8 (3.) 89.0 (3.5).6 (4.00) 45 (5.7) 5.4 84. (7.5).7 5.4 85.6 (7.3) (4.0) 4.4 (4.50) 5.4 (4.0) 4.4 (4.50) 5.4.7 5.4 8 (3.3) 89.0 (3.5).6 (4.00) 60.0 (.36) 66.6 (.6) 69.7 (.74) 9.7 (3.6) METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07 4
Order Information SWB505 MultiMount EN90 Weigh Module including Load Cell Order Information, Weigh Module Assembly Size Rated Capacity Description 3 5kg / lb Bolded entries are stocked Weigh Module Assembly Class / Description 0.05% Cable, Material /Lenght Material CS 304 36 306344 306345 306346 kg / lb C3 / III s n:3 / 306347 306348 306349 0kg / 44lb C3 / III s n:3 / 306350 30635 30635 30kg / 66lb C6 3063440 306344 306344 50kg / lb 0kg / 0lb 00kg / 440lb 300kg / 66lb 5-300kg / -66lb kg / 50lb 0kg / 500lb 550kg /,50lb 0kg /,500lb 00kg / 5,000lb -00kg / 50-5,000lb 4400kg /,000lb 4400kg /,000lb Stabilizer C3 / III s n:3 / 306353 306354 306355 C6 3063443 3063444 3063445 PVC / 3 m (9.8ft) C3 / III s n:3 / 306356 306357 306358 C6 3065354 3065355 3065356 C3 / III s n:3 / 306359 306360 30636 C6 3065357 3065358 3065359 C3 / III s n:3 / 30636 306363 306364 C6 3065360 306536 306536 30040930 3004093 Dead Stand 3005909 300593 Shock/Vibration Pad 3004093 Thermal Isolation Pad 80 C 30040933 Thermal Isolation Pad 70 C 30040935 Weigh Module Assembly Stabilizer 0.03% 306365 306366 306367 C3 / 306368 306369 306370 C6 / III M n: 306383 306387 30639 C3 / 30637 30637 306373 C6 / III M n: PU / 5 m (3.8ft) 306384 306388 30639 C3 / 306374 306375 306376 C6 / III M n: 306385 306389 306393 C3 / 306377 306378 306379 C6 / III M n: 306386 306390 306394 646399 646400 64640 Dead Stand 664 64640 6946403 Shock/Vibration Pad 605965 Thermal Isolation Pad 80 C 660 Thermal Isolation Pad 70 C 6464 Weigh Module Assembly Stabilizer C3 / PU / m (3.8ft) 306380 30638 30638 C6 / III M n: PU / m (3.8ft) 3063307 3063308 3063309 646404 646405 646406 Dead Stand 665 646407 646408 Shock/Vibration Pad 605938 Thermal Isolation Pad 80 C 66 Thermal Isolation Pad 70 C 6375 5 METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
Order Information SWB505 MultiMount EN90 Weigh Module without Load Cell SafeLock allows to install weigh module hardware without load cell to avoid sensor damage Combine weigh module with special cable length and cable material Use weigh module with dummy load cell for level detection systems Order Information, Weigh Module Kit Size Rated Capacity 5kg / lb kg / lb 0kg / 44lb Material CS 304 36 30633 306333 306334 Class 0.05% PVC / 3 m (ft) PVC / 5 m (6.6ft) 709934 708033 70964 708034 70556 708035 30kg / 66lb C6 307 306939 50kg / lb 0kg / 0lb 00kg / 440lb 300kg / 66lb kg / 50lb 0kg / 500lb 550kg / 50lb 0kg / 500lb 306335 306336 306337 70557 708036 C6 307 306940 70558 708037 C6 3073 30694 70559 708038 C6 3074 30694 70560 708039 C6 3075 306943 PU / m (6.6ft) PU / 3 m (ft) PU / 5 m (6.6ft) Suitable Load Cells Cable, Material / Length Dummy Load Cell 30059 PU / m (33ft) FEP / 3 m (ft) FEP / 5 m (6.6ft) FEP / m (33ft) 0.03% 309790 30979 30979 30979 309793 309794 309795 C3 / 300934 309604 300946 30094384 404 300944 3009443 C6 / III M n: 300935 309605 300947 30094385 405 3009443 30094433 C3 / 300938 309606 300950 30094388 44 3009446 30094436 C6 / III M n: 300939 309607 30095 30094389 45 3009447 30094437 C3 / 30094 309608 300954 3009439 444 3009440 30094440 C6 / III M n: 300943 309609 300955 30094393 445 300944 3009444 6800074 00kg / 5000lb 306338 306339 306340 3 4400kg / 000lb 30634 30634 306343 C3 / 30096 3003903 30039033 30094396 30094404 3009444 30094444 605963 C6 / III M n: 30097 3003903 30039034 30094397 30094405 3009445 30094445 C3 / 300930 3003904 30039043 30094400 30094408 3009448 30094448 605964 C6 / III M n: 30093 3003904 30039044 3009440 30094409 3009449 30094449 Bolded entries are stocked METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07 6
SWB505 MultiMount EN90 Cable Colour MTB Colour Function Green + Excitation Black Excitation White + Signal Red Signal Yellow + Sense Blue Sense Yellow (long) Shield SWB505 MultiMount EN90 Cable Colour 0745A Colour Green Black White Red Yellow Function + Excitation Excitation + Signal Signal Shield Full Connectivity METTLER TOLEDO supplies various data communication interfaces that enable our sensors and instruments to communicate with your PLC, MES, or ERP systems. Weighing Electronics METTLER TOLEDO offers a complete family of electronics from simple weighing to application solutions for filling, stock control, batching, formulation, counting, checkweighing. Our extensive service network is among the best in the world and ensures maximum availability and service life of your product. Mettler-Toledo GmbH Industrial Division CH-8606 Nänikon, Switzerland Tel. + 4 44 944 www.mt.com For more information Local contact: www.mt.com/contacts Subject to technical changes /07 Mettler-Toledo GmbH MarCom Switzerland MTSI Document-No: 304863