Steps for self-assembly 100 S C.08 Steps for self-assembly 100 L C.10 Steps for self-assembly 75 L C.12 Industrial ladders C.13

Step system

Technical information Test marks Your Partner in matters of safety Founding member of the German Ladder and Mobile Scaffolding Association Founding member of the European Ladder Federation PROFI Ladder classifications PLUS STANDARD For continuous industrial operation better than DIN EN 131 For industry and the trade better than DIN EN 131 For the office, home and garden better than DIN EN 131 Order details: 1. Order No. (0000 0000 00) 2. Additionally, when standard measurements do not apply, the vertical height, angle of incline and/or projection 3. Clear width 4. Special equipment 5. Customised and special production cannot be exchanged or returned. C.02 Prices are valid until 30. 06.. We reserve the right increase prices from 01. 07..

Contents Assignment* Page TEST MARK C.02 SERVICE PACKAGE C.04 SERIES DESIGN FEATURES C.05 STEPS Steps for self-assembly 100 S C.08 Steps for self-assembly 100 L C.10 Steps for self-assembly 75 L C.12 Industrial ladders C.13 STEPS WITH PLATFORM Steps with platform, without support element 100 S C.14 Steps with platform, without support element 75 L C.16 Steps with platform with support element 100 S C.18 Steps with platform and castors, accessible from one side 100 S C.20 Steps with platform and castors, accessible from both sides 100 S C.22 BRIDGES Bridge 100 S C.23 WORKSTEPS Work steps 100 S C.24 Heavy duty work steps Typ 7671 C.26 Work steps Typ 7656 C.27 Work steps Typ 7657 C.28 Step Typ 3005 C.29 SPECIAL EQUIPMENT / ACCESSORIES C.30 CONNECTORS / SECTIONS 0301 range for tube Ø 30 mm C.35 0303 range for profile connectors C.38 *) Assignment for corresponding special equipment and spare parts/accessories C.03

HACA Vario-Step service package The new HACA service package: Planning HACA s own network of plant warehouses and field service throughout Germany provides help with planning solutions from our Vario-Step range. We will support you with measuring, planning and with obtaining the data necessary to process your enquiry. Please call us on 06434/25-0 or email hallo@haca.com to arrange an appointment. Production We manufacture the ideal product to suit your requirements at our factory in Bad Camberg Delivery The standard scope of delivery of our product is:»pre-assembled, but dismantled into individual assembly groups for transport«we offer assembled delivery in our own truck with immediate effect for steps with a platform, steps with a platform on castors and bridges. In these cases we also offer final assembly (railings etc.) on site. Spare parts service Many years and decades since introduction of the first VARIO-STEP system components, we carry a wide range of spare parts which enable you to conduct repairs of all kinds. C.04

»100 S range«advantages n Suitable for outdoor use n Repair-friendly due to replaceable steps, railings, stringers and other accessories n All components are cut precisely to length, bundled together for transport and packed with accessories n Inexpensive self-assembly n Standard incline 45 /60 Stringers n Stringers made of very strong aluminium special section with integrated T-groove to fit steps, railings and fittings n Step stringer 104 x 30.5 mm n Platform stringer 145 x 30.5 mm Steps n Made from hot-dip galvanised perforated sheet with nonslip perforations right up to the edge of the step n Slip resistance R 11 n Step size: Clear width 600/800/1000 mm, 500 mm on request, Step depth at 45 225 mm, at 60 200 mm Railing n Made from hot-dip galvanised steel tubing Ø 30 mm with stable cast aluminium pipe connectors n Designed in accordance with DIN EN ISO 14122-3 for a horizontal force of 300 N/m n Steps less than 60 incline and platform railing with knee rail Vertical height (m) Special incline of 35 75 and other vertical heights on request. Total load (dan ) guide values Coloured powder-coating or anodising on request C.05

»100 L range«advantages n Suitable for outdoor use n Repair-friendly due to replaceable steps, railings, stringers and other accessories n All components are cut precisely to length, bundled together for transport and packed with accessories n Inexpensive self-assembly n Standard incline 45 /60 Stringers n Stringers made of very strong aluminium special section with integrated T-groove to fit steps, railings and fittings n Step stringer 104 x 30.5 mm n Platform stringer 145 x 30.5 mm Steps n Made from special aluminium section with sealed surface and non-slip profile n Step chamfering angled inwards to protect heels n Step size: Clear width 600/800/1000 mm, other sizes on request, Step depth 250 mm Railing n Made from hot-dip galvanised steel tubing Ø 30 mm with stable cast aluminium pipe connectors n Designed in accordance with DIN EN ISO 14122-3 for a horizontal force of 300 N/m n Steps less than 60 incline and platform railing with knee rail Vertical height (m) Special incline of 35 75 and other vertical heights on request. Total load (dan ) guide values Coloured powder-coating or anodising on request C.06

»75 L range«vorzüge n Suitable for outdoor use n Repair-friendly due to replaceable steps, railings, stringers and other accessories n Lighter design n All components are cut precisely to length, bundled together for transport and packed with accessories n Inexpensive self-assembly n Standard incline 60 Stringers n Stringers made of strong aluminium special section with integrated T-groove to fit steps, railings and fittings n Step and platform stringer 75 x 25 mm n Bottom stringer ends with plastic foot pads n Top stringer ends with hooks Steps n Made from special aluminium section with sealed surface and non-slip profile n Step chamfering angled inwards to protect heels n Step size: Clear width 500/600 mm, other sizes on request, Step depth 150 mm Railing n Made from hot-dip galvanised steel tubing Ø 30 mm with stable cast aluminium pipe connectors n Platform railing with knee rail Vertical height (m) Special incline of 60 75 and other vertical heights on request. Total load (dan ) guide values Coloured powder-coating or anodising on request C.07

Steps for self-assembly»100 S range«assignment from Page C.03 Advantages n Steps up / down to intermediate floors, ramps, machines, stationary work platforms, basements, pits etc. for checking and maintenance work n Fixed installation n Delivery in set Stringers n Top stringer ends with hinge at top of stairs for securing to horizontal/vertical surfaces n Bottom stringer ends with bracket on bottom of stairs with drilled hole for fixed installation Railing n One-sided, can be mounted on left or right (railing on both sides or no railing possible on request) Special equipment (from Page C.30): n Perpendicular angled foot ends instead of inclined stringer ends n Foot pads instead of brackets on the bottom of stairs n Hooks instead of hinge at top of stairs n Intermediate platform n Self-closing gate Available on request: Completely assembled steps Steps for self-assembly with incline 35 38 correspond to the workplace ordinance and workplace guidelines. Steps for self-assembly with incline 39 45 in accordance with the workplace ordinance correspond to DIN EN ISO 14 122-3. Steps for self-assembly with incline 46 70 (for confined spaces) These constructions are generally referred to as stairs because of the large step depth and associated step safety. However they are stair-like ladders which are subject to regulations and standards applicable to step ladders (e.g. DIN EN 131). Railings are not stipulated here. Vertical height C.08 Projection Clear width

Steps for self-assembly»100 S range«incline 60 - with one railing Size Vertical Projection Clear width Clear width Clear width hieght 1 ) 600 mm p. 800 mm p. 1000 mm p. m approx. m approx. Order No. set Order No. set Order No. set 3 0,75 0,58 3066 0001 03 3068 0001 03 3060 0001 03 4 1,00 0,72 3066 0001 04 3068 0001 04 3060 0001 04 5 1,25 0,87 3066 0001 05 3068 0001 05 3060 0001 05 6 1,50 1,01 3066 0001 06 3068 0001 06 3060 0001 06 7 1,75 1,16 3066 0001 07 3068 0001 07 3060 0001 07 8 2,00 1,30 3066 0001 08 3068 0001 08 3060 0001 08 9 2 ) 2,25 1,45 3066 0001 09 3068 0001 09 3060 0001 09 10 2,50 1,59 3066 0001 10 3068 0001 10 3060 0001 10 11 2,75 1,74 3066 0001 11 3068 0001 11 3060 0001 11 12 3 ) 3,00 1,88 3066 0001 12 3068 0001 12 3060 0001 12 13 3,25 2,03 3066 0001 13 3068 0001 13 3060 0001 13 14 3,50 2,17 3066 0001 14 3068 0001 14 3060 0001 14 15 3,75 2,31 3066 0001 15 3068 0001 15 3060 0001 15 16 4,00 2,46 3066 0001 16 3068 0001 16 3060 0001 16 17 4,25 2,61 3066 0001 17 3068 0001 17 3060 0001 17 18 3 ) 4,50 2,75 3066 0001 18 3068 0001 18 3060 0001 18 19 4,75 2,90 3066 0001 19 3068 0001 19 3060 0001 19 20 5,00 3,05 3066 0001 20 3068 0001 20 3060 0001 20 500 mm clear width on request Incline 45 - with one railing Size Vertical Projection Clear width Clear width Clear width hieght 1 ) 600 mm p. 800 mm p. 1000 mm p. m approx. m approx. Order No. set Order No. set Order No. set 3 0,60 0,76 3046 0001 03 3048 0001 03 3040 0001 03 4 0,80 0,96 3046 0001 04 3048 0001 04 3040 0001 04 5 1,00 1,16 3046 0001 05 3048 0001 05 3040 0001 05 6 1,20 1,36 3046 0001 06 3048 0001 06 3040 0001 06 7 1,40 1,56 3046 0001 07 3048 0001 07 3040 0001 07 8 1,60 1,76 3046 0001 08 3048 0001 08 3040 0001 08 9 2 ) 1,80 1,96 3046 0001 09 3048 0001 09 3040 0001 09 10 2,00 2,16 3046 0001 10 3048 0001 10 3040 0001 10 11 2,20 2,36 3046 0001 11 3048 0001 11 3040 0001 11 12 2,40 2,56 3046 0001 12 3048 0001 12 3040 0001 12 13 2,60 2,76 3046 0001 13 3048 0001 13 3040 0001 13 14 2,80 2,96 3046 0001 14 3048 0001 14 3040 0001 14 15 3 ) 3,00 3,16 3046 0001 15 3048 0001 15 3040 0001 15 16 3,20 3,36 3046 0001 16 3048 0001 16 3040 0001 16 17 3,40 3,56 3046 0001 17 3048 0001 17 3040 0001 17 18 3 ) 3,60 3,76 3046 0001 18 3048 0001 18 3040 0001 18 19 3,80 3,96 3046 0001 19 3048 0001 19 3040 0001 19 20 4,00 4,16 3046 0001 20 3048 0001 20 3040 0001 20 500 mm clear width on request 1 ) From ground to top edge of intermediate floor (or similar) 2 ) With diagonal bracing from size 9. 3 ) Intermediate platforms are required under DIN EN ISO 14 122-3»Stationary accesses to mechanical installations «as from a vertical height of 3 m. The height may be increased to 4 m in the case of a single flight of steps. Intermediate platforms are required under BGR 234»Guidelines for warehouse facilities and equipment«as from 18 steps. Supports must be mounted as from size 18 see Accessories from Page C.30. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.09

Steps for self-assembly»100 L range«assignment from Page C.03 Advantages n Steps up / down to intermediate floors, ramps, machines, stationary work platforms, basements, pits etc. for checking and maintenance work n Fixed installation n Delivery in set Stringers n Top stringer ends with hinge at top of stairs for securing to horizontal/vertical surfaces n Bottom stringer ends with bracket on bottom of stairs with drilled hole for fixed installation Railing n One-sided, can be mounted on left or right (railing on both sides or no railing possible on request) Special equipment (from Page C.30): n Perpendicular angled foot ends instead of inclined stringer ends n Foot pads instead of brackets on the bottom of stairs n Hooks instead of hinge at top of stairs n Intermediate platform n Self-closing gate Available on request: Completely assembled steps Steps for self-assembly with incline 35 38 correspond to the workplace ordinance and workplace guidelines. Steps for self-assembly with incline 39 45 in accordance with the workplace ordinance correspond to DIN EN ISO 14 122-3. Steps for self-assembly with incline 46 70 (for confined spaces) These constructions are generally referred to as stairs because of the large step depth and associated step safety. However they are stair-like ladders which are subject to regulations and standards applicable to step ladders (e.g. DIN EN 131). Railings are not stipulated here. Vertical height C.10 Projection Clear width

Steps for self-assembly»100 L range«incline 60 - with one railing Size Vertical Projection Clear width Clear width Clear width hieght 1 ) 600 mm p. 800 mm p. 1000 mm p. m approx. m approx. Order No. set Order No. set Order No. set 3 0,75 0,65 3086 0001 03 3088 0001 03 3080 0001 03 4 1,00 0,79 3086 0001 04 3088 0001 04 3080 0001 04 5 1,25 0,94 3086 0001 05 3088 0001 05 3080 0001 05 6 1,50 1,08 3086 0001 06 3088 0001 06 3080 0001 06 7 1,75 1,23 3086 0001 07 3088 0001 07 3080 0001 07 8 2,00 1,37 3086 0001 08 3088 0001 08 3080 0001 08 9 2 ) 2,25 1,52 3086 0001 09 3088 0001 09 3080 0001 09 10 2,50 1,66 3086 0001 10 3088 0001 10 3080 0001 10 11 2,75 1,81 3086 0001 11 3088 0001 11 3080 0001 11 12 3 ) 3,00 1,95 3086 0001 12 3088 0001 12 3080 0001 12 13 3,25 2,10 3086 0001 13 3088 0001 13 3080 0001 13 14 3,50 2,24 3086 0001 14 3088 0001 14 3080 0001 14 15 3,75 2,38 3086 0001 15 3088 0001 15 3080 0001 15 16 4,00 2,53 3086 0001 16 3088 0001 16 3080 0001 16 17 4,25 2,68 3086 0001 17 3088 0001 17 3080 0001 17 18 3 ) 4,50 2,82 3086 0001 18 3088 0001 18 3080 0001 18 19 4,75 2,96 3086 0001 19 3088 0001 19 3080 0001 19 20 5,00 3,10 3086 0001 20 3088 0001 20 3080 0001 20 Incline 45 - with one railing Size Vertical Projection Clear width Clear width Clear width hieght 1 ) 600 mm p. 800 mm p. 1000 mm p. m approx. m approx. Order No. set Order No. set Order No. set 3 0,60 0,81 3076 0001 03 3078 0001 03 3070 0001 03 4 0,80 1,01 3076 0001 04 3078 0001 04 3070 0001 04 5 1,00 1,21 3076 0001 05 3078 0001 05 3070 0001 05 6 1,20 1,41 3076 0001 06 3078 0001 06 3070 0001 06 7 1,40 1,61 3076 0001 07 3078 0001 07 3070 0001 07 8 1,60 1,81 3076 0001 08 3078 0001 08 3070 0001 08 9 2 ) 1,80 2,01 3076 0001 09 3078 0001 09 3070 0001 09 10 2,00 2,21 3076 0001 10 3078 0001 10 3070 0001 10 11 2,20 2,41 3076 0001 11 3078 0001 11 3070 0001 11 12 2,40 2,61 3076 0001 12 3078 0001 12 3070 0001 12 13 2,60 2,81 3076 0001 13 3078 0001 13 3070 0001 13 14 2,80 3,01 3076 0001 14 3078 0001 14 3070 0001 14 15 3 ) 3,00 3,21 3076 0001 15 3078 0001 15 3070 0001 15 16 3,20 3,41 3076 0001 16 3078 0001 16 3070 0001 16 17 3,40 3,61 3076 0001 17 3078 0001 17 3070 0001 17 18 3 ) 3,60 3,81 3076 0001 18 3078 0001 18 3070 0001 18 19 3,80 4,01 3076 0001 19 3078 0001 19 3070 0001 19 20 4,00 4,21 3076 0001 20 3078 0001 20 3070 0001 20 1 ) From ground to top edge of intermediate floor (or similar) 2 ) With diagonal bracing from size 9. 3 ) Intermediate platforms are required under DIN EN ISO 14 122-3»Stationary accesses to mechanical installations «as from a vertical height of 3 m. The height may be increased to 4 m in the case of a single flight of steps. Intermediate platforms are required under BGR 234»Guidelines for warehouse facilities and equipment«as from 18 steps. Supports must be mounted as from size 18 see Accessories from Page C.30. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.11

Steps for self-assembly»75 L range«assignment from Page C.03 Advantages n Steps up / down to intermediate floors, ramps, machines, stationary work platforms, basements, pits etc. for checking and maintenance work n For hooking in n Delivery in set Railing n One-sided, can be mounted on left or right (railing on both sides or no railing possible on request) Special equipment (from Page C.30): n Perpendicular angled foot ends instead of inclined stringer ends n Brackets on the bottom of stairs instead of foot pads n Additional pair of hooks for parked position n Intermediate platform n Self-closing gate n Hooking mechanism Available on request: Completely assembled steps Vertical height Projection Clear width C.12

Selbstbautreppen»Serie 75 L«Size Vertical Projection Clear width Clear width Height 1 ) 500 mm p. 600 mm p. m. approx. m. approx. Order No. set Order No. set 3 0,75 0,55 7065 0001 03 7066 0001 03 4 1,00 0,69 7065 0001 04 7066 0001 04 5 1,25 0,84 7065 0001 05 7066 0001 05 6 1,50 0,98 7065 0001 06 7066 0001 06 7 1,75 1,13 7065 0001 07 7066 0001 07 8 2,00 1,27 7065 0001 08 7066 0001 08 9 2 ) 2,25 1,41 7065 0001 09 7066 0001 09 10 2,50 1,56 7065 0001 10 7066 0001 10 11 2,75 1,70 7065 0001 11 7066 0001 11 12 3 ) 3,00 1,85 7065 0001 12 7066 0001 12 13 3,25 1,99 7065 0001 13 7066 0001 13 14 3,50 2,14 7065 0001 14 7066 0001 14 15 3,75 2,28 7065 0001 15 7066 0001 15 16 4,00 2,43 7065 0001 16 7066 0001 16 17 4,25 2,57 7065 0001 17 7066 0001 17 18 3 ) 4,50 2,72 7065 0001 18 7066 0001 18 19 4,75 2,86 7065 0001 19 7066 0001 19 20 5,00 3,00 7065 0001 20 7066 0001 20 1 ) From ground to top edge of intermediate floor (or similar) 2 ) With diagonal bracing from size 9. 3 ) Intermediate platforms are required under DIN EN ISO 14 122-3»Stationary accesses to mechanical installations «as from a vertical height of 3 m. The height may be increased to 4 m in the case of a single flight of steps. Intermediate platforms are required under BGR 234»Guidelines for warehouse facilities and equipment«as from 18 steps. Supports must be mounted as from size 18 see Accessories from Page C.30. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size Industrial ladders Steel, hot-dip galvanised n Ladders for checking and maintenance of intermediate floors etc. n All parts made from steel, hot-dip galvanised n Stringers made from steel with steps welded in n Steps with non-slip perforation n With railings on both sides n Dimensions: Incline 60 Depth of step 150 mm Vertical distance between steps 235 mm n EN 131 Size 9 Type 5815.10 clear width 500 mm with railings on both sides Size Vertical Projection Total weight Pre- height 1 ) incl. railings assembled m. approx. m. approx. kg approx. Order No. per set 5 1,20 0,69 23 5815 1000 05 6 1,44 0,83 25 5815 1000 06 7 1,68 0,97 27 5815 1000 07 8 1,92 1,11 30 5815 1000 08 9 2,16 1,25 33 5815 1000 09 10 2,40 1,39 36 5815 1000 10 11 2,64 1,52 39 5815 1000 11 1 ) From the floor to the top edge of the intermediate floor or similar C.13

Steps with platform, without support element»100 S range«assignment from Page C.03 Advantages n Ladders to higher parts of buildings, to machines, installations and storage facilities n Fixed installation n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n Top stringer ends with hinge at front of platform for securing to vertical surfaces n Bottom stringer ends with bracket on bottom of stairs with drilled hole for fixed installation n Platform stringer with integrated 100 mm high base board Railing n On both sides of the ladder n On both sides of the platform so that exit is at the front (other versions possible at the request of the customer) Dimensions n Platform length 1000 mm n Platform railing height 1100 mm Special equipment (from Page C.30): n Platform size extension / reduction n Perpendicular angled foot ends instead of inclined stringer ends n Foot pads instead of brackets on the bottom of stairs n Intermediate platform n Self-closing gate n Side exit Platform length Vertical height C.14 Projection Clear width

Steps with platform, without support element»100 S range«incline 60 Size Vertical Projection Clear width Clear width Clear width height 1 ) 600 mm p. 800 mm p. 1000 mm p. m. approx. m. approx. Order No. set Order No. set Order No. set 4 1,00 1,52 3166 0000 04 3168 0000 04 3160 0000 04 5 1,25 1,66 3166 0000 05 3168 0000 05 3160 0000 05 6 1,50 1,80 3166 0000 06 3168 0000 06 3160 0000 06 7 2 ) 1,75 1,95 3166 0000 07 3168 0000 07 3160 0000 07 8 2,00 2,09 3166 0000 08 3168 0000 08 3160 0000 08 9 2,25 2,24 3166 0000 09 3168 0000 09 3160 0000 09 10 2,50 2,38 3166 0000 10 3168 0000 10 3160 0000 10 11 2,75 2,53 3166 0000 11 3168 0000 11 3160 0000 11 12 3 ) 3,00 2,67 3166 0000 12 3168 0000 12 3160 0000 12 13 3,25 2,85 3166 0000 13 3168 0000 13 3160 0000 13 14 3,50 2,99 3166 0000 14 3168 0000 14 3160 0000 14 15 3,75 3,14 3166 0000 15 3168 0000 15 3160 0000 15 16 4,00 3,28 3166 0000 16 3168 0000 16 3160 0000 16 Incline 45 Size Vertical Projection Clear width Clear width Clear width height 1 ) 600 mm p. 800 mm p. 1000 mm p. m. approx. m. approx. Order No. set Order No. set Order No. set 4 0,80 1,70 3146 0000 04 3148 0000 04 3140 0000 04 5 1,00 1,90 3146 0000 05 3148 0000 05 3140 0000 05 6 1,20 2,10 3146 0000 06 3148 0000 06 3140 0000 06 7 2 ) 1,40 2,30 3146 0000 07 3148 0000 07 3140 0000 07 8 1,60 2,50 3146 0000 08 3148 0000 08 3140 0000 08 9 1,80 2,70 3146 0000 09 3148 0000 09 3140 0000 09 10 2,00 2,90 3146 0000 10 3148 0000 10 3140 0000 10 11 2,20 3,10 3146 0000 11 3148 0000 11 3140 0000 11 12 2,40 3,30 3146 0000 12 3148 0000 12 3140 0000 12 13 2,60 3,50 3146 0000 13 3148 0000 13 3140 0000 13 14 2,80 3,70 3146 0000 14 3148 0000 14 3140 0000 14 15 3 ) 3,00 3,90 3146 0000 15 3148 0000 15 3140 0000 15 16 3,20 4,10 3146 0000 16 3148 0000 16 3140 0000 16 17 3,40 4,30 3146 0000 17 3148 0000 17 3140 0000 17 18 3 ) 3,60 4,50 3146 0000 18 3148 0000 18 3140 0000 18 19 3,80 4,70 3146 0000 19 3148 0000 19 3140 0000 19 20 4,00 4,90 3146 0000 20 3148 0000 20 3140 0000 20 1 ) From ground to top edge of intermediate floor (or similar) 2 ) With diagonal bracing from size 7. 3 ) Intermediate platforms are required under DIN EN ISO 14 122-3»Stationary accesses to mechanical installations «as from a vertical height of 3 m. The height may be increased to 4 m in the case of a single flight of steps. Intermediate platforms are required under BGR 234»Guidelines for warehouse facilities and equipment«as from 18 steps. Supports must be mounted as from size 18 see Accessories from Page C.30. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.15

Steps with platform, without support element»75 L range«assignment from Page C.03 Advantages n Ascent/descent to intermediate floors, ramps, to machines, fixed work platforms, basement, pits etc. n Fixed installation n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n From size 13, with bracket on bottom of stairs with drilled hole for fixed installation n Platform stringer with integrated 48 mm high base board Railing n On both sides of the ladder n On both sides of the platform so that exit is at the front (other versions possible at the request of the customer) Dimensions n Platform length 450 mm n Platform railing height 1100 mm Special equipment (from Page C.30): n Platform extension n Perpendicular angled foot ends instead of inclined stringer ends n Brackets on the bottom of stairs up to size 12 instead of foot pads n Intermediate platforms n Self-closing gate n Hooking mechanism Platform length Vertical height Projection Clear width C.16

Steps with platform, without support element»75 L range«incline 60 - platform length approx. 450 mm with railings on both sides of steps and platform Size Vertical Projection Clear width Clear width height 1 ) 500 mm p. 600 mm p. m. approx. m. approx. Order No. set Order No. set 3 0,75 0,85 7165 0000 03 7166 0000 03 4 1,00 1,00 7165 0000 04 7166 0000 04 5 1,25 1,14 7165 0000 05 7166 0000 05 6 1,50 1,29 7165 0000 06 7166 0000 06 7 2 ) 1,75 1,43 7165 0000 07 7166 0000 07 8 2,00 1,57 7165 0000 08 7166 0000 08 9 2,25 1,72 7165 0000 09 7166 0000 09 10 2,50 1,86 7165 0000 10 7166 0000 10 11 2,75 2,01 7165 0000 11 7166 0000 11 12 3 ) 3,00 2,15 7165 0000 12 7166 0000 12 13 4 ) 3,25 2,29 7165 0000 13 7166 0000 13 14 3,50 2,44 7165 0000 14 7166 0000 14 15 3,75 2,58 7165 0000 15 7166 0000 15 16 4,00 2,73 7165 0000 16 7166 0000 16 17 4,25 2,87 7165 0000 17 7166 0000 17 18 3 ) 5 ) 4,50 3,02 7165 0000 18 7166 0000 18 19 4,75 3,16 7165 0000 19 7166 0000 19 20 5,00 3,30 7165 0000 20 7166 0000 20 1 ) From ground to top edge of intermediate floor (or similar) 2 ) With diagonal bracing from size 7. 3 ) Intermediate platforms are required under DIN EN ISO 14 122-3»Stationary accesses to mechanical installations «as from a vertical height of 3 m. The height may be increased to 4 m in the case of a single flight of steps. Intermediate platforms are required under BGR 234»Guidelines for warehouse facilities and equipment«as from 18 steps. Supports must be mounted as from size 18 see Accessories from Page C.30. 4 ) From size 13 with connecting elements for fixed installation, steel parts hot-dip galvanised 5 ) Supports must be mounted as from size 18 see Accessories from Page C.30. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.17

Steps with platform, with support element»100 S range«assignment from Page C.03 Advantages n Ladders for operating and inspecting machinery etc. n Fixed installation (only secured to the floor) n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n Bottom stringer ends with bracket on bottom of stairs with drilled hole for fixed installation n Platform stringer with integrated 100 mm high base board Railing n On both sides of the ladder n On three sides of the platform (other versions possible at the request of the customer) Support element n Made from aluminium section with cast aluminium connectors n Screwed to stairs and platform n With bracket, incl. drilled hole for fixed installation Dimensions n Platform length 1000 mm n Platform railing height 1100 mm Special equipment (from Page C.30): n Platform size extension/reduction n Perpendicular angled foot ends instead of inclined stringer ends n Intermediate platform n Self-closing gate Platform length Vertical height C.18 Projection Clear width

Steps with platform, with support element»100 S range«incline 60 Size Vertical Projection Clear width Clear width Clear width height 1 ) 600 mm p. 800 mm p. 1000 mm p. m. approx. m. aprrox. Order No. set Order No. set Order No. set 5 1,25 1,66 3266 0000 05 3268 0000 05 3260 0000 05 6 1,50 1,80 3266 0000 06 3268 0000 06 3260 0000 06 7 2 ) 1,75 1,95 3266 0000 07 3268 0000 07 3260 0000 07 8 2,00 2,09 3266 0000 08 3268 0000 08 3260 0000 08 9 2,25 2,24 3266 0000 09 3268 0000 09 3260 0000 09 10 2,50 2,38 3266 0000 10 3268 0000 10 3260 0000 10 11 2,75 2,53 3266 0000 11 3268 0000 11 3260 0000 11 12 3,00 2,67 3266 0000 12 3268 0000 12 3260 0000 12 Incline 45 Size Vertical Projection Clear width Clear width Clear width height 1 ) 600 mm p. 800 mm p. 1000 mm p. m. approx. m. aprrox. Order No. set Order No. set Order No. set 4 0,80 1,80 3246 0000 04 3248 0000 04 3240 0000 04 5 1,00 2,00 3246 0000 05 3248 0000 05 3240 0000 05 6 1,20 2,20 3246 0000 06 3248 0000 06 3240 0000 06 7 2 ) 1,40 2,40 3246 0000 07 3248 0000 07 3240 0000 07 8 1,60 2,60 3246 0000 08 3248 0000 08 3240 0000 08 9 1,80 2,80 3246 0000 09 3248 0000 09 3240 0000 09 10 2,00 3,00 3246 0000 10 3248 0000 10 3240 0000 10 11 2,20 3,20 3246 0000 11 3248 0000 11 3240 0000 11 12 2,40 3,40 3246 0000 12 3248 0000 12 3240 0000 12 13 2,60 3,60 3246 0000 13 3248 0000 13 3240 0000 13 14 2,80 3,80 3246 0000 14 3248 0000 14 3240 0000 14 1 ) From ground to top edge of platform (or similar) 2 ) With diagonal bracing from size 7. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.19

Steps with platform and castors,»100 S range«accessible from one side Assignment from Page C.03 Advantages n Ladders for machines, storage facilities, installations, containers etc. n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n Bottom stringer ends with foot pads n Platform stringer with integrated 100 mm high base board Railing n On both sides of the ladder n On three sides of the platform (other versions possible at the request of the customer) Support element n Made from aluminium section with cast aluminium connectors n Screwed to stairs, platform and cross braces Castors n Polyurethane castors mounted on roller bearings with excellent running properties and high safety standard n Type 3546.56/3548.56 with a projecting cross brace on the support element can therefore be moved like a wheelbarrow with fixed castors for heavy loads n Type 3548.58/3540.58 Mwith two non-projecting cross braces suitable for narrow corridors both guided castors on the climbing element cross brace are braked by actuating the central brake lever support element cross brace with castors for heavy loads standard safety is guaranteed by ballast Type 3546.56 / 3548.56 Dimensions n Platform length 800 mm n Platform railing height 1100 mm n Incline 45 Sonderausstattung (siehe ab Seite C.30): n Platform extension n Perpendicular angled foot ends instead of inclined stringer ends (only 3546.56 and 3548.56) n Handles for Type 3546.56/3548.56 n Lever rollers for Type 3546.56/3548.56 n Self-closing gate Available on request: n Casters with total stop n Casters with direction lock n Central braking castors Ø 200 mm n 4 castors centrally braked Type 3548.58 / 3540.58 C.20

Steps with platform and castors,»100 S range«accessible from one side Size Vertical Outer dimensions Clear width Outer dimensions Clear width height 1 ) TB x SL 600 mm p. TB x SL 800 mm p. m. approx. m. approx. Order No. set m. approx. Order No. set 6 1,20 1,20 x 1,99 3546 5600 06 1,46 x 1,99 3548 5600 06 7 1,40 1,20 x 2,19 3546 5600 07 1,46 x 2,19 3548 5600 07 8 2 ) 3 ) 1,60 1,20 x 2,39 3546 5600 08 1,46 x 2,39 3548 5600 08 9 1,80 1,20 x 2,59 3546 5600 09 1,46 x 2,59 3548 5600 09 10 2,00 1,20 x 2,79 3546 5600 10 1,46 x 2,79 3548 5600 10 11 2,20 1,20 x 2,99 3546 5600 11 1,46 x 2,99 3548 5600 11 12 2,40 1,46 x 3,19 3546 5600 12 1,46 x 3,19 3548 5600 12 14 2,80 1,46 x 3,59 3546 5600 14 1,66 x 3,59 3548 5600 14 16 3,20 1,46 x 3,99 3546 5600 16 1,66 x 3,99 3548 5600 16 Size Vertical Outer dimensions Clear width Outer dimensions Clear width height 1 ) TB x SL 800 mm p. TB x SL 1000 mm p. m. approx. m. approx. Order No. set m. approx. Order No. set 6 1,20 0,90 x 1,89 3548 5800 06 1,10 x 1,89 3540 5800 06 7 1,40 0,90 x 2,09 3548 5800 07 1,10 x 2,09 3540 5800 07 8 2 ) 3 ) 1,60 0,90 x 2,29 3548 5800 08 1,10 x 2,29 3540 5800 08 9 1,80 0,90 x 2,49 3548 5800 09 1,10 x 2,49 3540 5800 09 10 2,00 0,90 x 2,69 3548 5800 10 1,10 x 2,69 3540 5800 10 11 2,20 0,90 x 2,89 3548 5800 11 1,10 x 2,89 3540 5800 11 12 2,40 0,90 x 3,09 3548 5800 12 1,10 x 3,09 3540 5800 12 14 2,80 0,90 x 3,49 3548 5800 14 1,10 x 3,49 3540 5800 14 16 3,20 0,90 x 3,89 3548 5800 16 1,10 x 3,89 3540 5800 16 1 ) From the floor to the top edge of platform. 2 ) With diagonal bracing from size 8. 3 ) From this size it is advisable to use a lever roller or to fit the platform steps with four castors. (See special equipment and accessories from Page C.30). Clear width 2 ) Vertical height Projection (SL) Clear width Cross brace width (TB) Type 3546.56 / 3548.56 Clear width 2 ) Vertical height Type 3548.58 / 3540.58 Projection (SL) Clear width C.21

Steps with platform and castors,»100 S range«accessible from both sides Zuordnung von Seite C.03 Advantages n Ladders for shelves, for operating and inspecting machinery etc. n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n Bottom stringer ends with foot pads n Platform stringer with integrated 100 mm high base board 2 ) Railing n On both sides of the ladder n On both sides of the platform (other versions possible at the request of the customer) Support element n Made from aluminium section with cast aluminium connectors n Screwed to stairs and cross braces Castors n Polyurethane castors mounted on roller bearings with excellent running properties and high safety standard n With two projecting cross braces n Fitted with four castors with total stop for size 4 and 5 n With two castors with total stop and two casters with direction lock from size 6 2 ) Clear width Dimensions n Platform length 800 mm Projection n Platform railing height 1100 mm n Incline 60 2 ) 2 ) Special equipment (from Page C.30): n Platform extension n Self-closing gate Projection (SL) Available on request: n Central braking n Four casters with total stop from size 6 Size Vertical Outer dimensions Clear width p. height 1 ) TB x SL 600 mm set m. approx. m. approx. Order No. 4 1,00 0,94 x 1,70 3666 5400 04 5 1,25 0,94 x 1,98 3666 5400 05 6 1,50 1,12 x 2,31 3666 5400 06 7 1,75 1,12 x 2,59 3666 5400 07 8 2 ) 2,00 1,12 x 2,88 3666 5400 08 9 2,25 1,12 x 3,17 3666 5400 09 10 2,50 1,12 x 3,46 3666 5400 10 12 3,00 1,46 x 4,04 3666 5400 12 Clear width Vertical height C.22 1 ) From the floor to the top of the platform 2 ) With one diagonal brace per climbing element from size 8. Cross brace width (TB)

Bridges»100 S range«accessible from both sides Assignment from Page C.03 Advantages n Bridges over machines, conveyor belts, pits, containers etc. n Fixed installation (secured to the floor) n Pre-assembled, but dismantled into individual assembly groups for transport Stringers n Bottom stringer ends with bracket on bottom of stairs with drilled hole for fixed installation n Platform stringer with integrated 100 mm high base board 2 ) 2 ) Railing n On both sides of each ladder n On both sides of the platform (other versions possible at the request of the customer) Dimensions n Platform length 800 mm n Platform railing height 1100 mm n Incline 60 LH Clear height 2 ) 2 ) LPU Clear access at bottom SL Step length Special equipment (from Page C.30): n Platform enlargement n Perpendicular angled foot ends instead of inclined stringer ends n Self-closing gate Available on request: Clear width Other vertical heights Vertical height Vertical height Clear width Size Vertical Step Clear access dimensions Clear width p. Clear width p. height 1 ) length top x bottom x height 600 mm unit 800 mm unit m. approx. m. approx. m. approx. Order No. Order No. 4 1,00 1,90 0,55 x 1,64 x 0,95 3866 0000 04 3868 0000 04 5 2 ) 1,25 2,20 0,55 x 1,93 x 1,20 3866 0000 05 3868 0000 05 6 1,50 2,50 0,55 x 2,22 x 1,45 3866 0000 06 3868 0000 06 7 1,75 2,75 0,55 x 2,51 x 1,70 3866 0000 07 3868 0000 07 8 2,00 3,05 0,55 x 2,80 x 1,95 3866 0000 08 3868 0000 08 9 2,25 3,35 0,55 x 3,09 x 2,20 3866 0000 09 3868 0000 09 10 2,50 3,60 0,55 x 3,38 x 2,45 3866 0000 10 3868 0000 10 11 2,75 3,90 0,55 x 3,76 x 2,70 3866 0000 11 3868 0000 11 1 ) From the floor to the top of the platform 2 ) With one diagonal brace per climbing element from size 5. Price for stairs with fixed sizes (intermediate sizes»vertical height...«): Price for the next size C.23

Work steps»100 S range«assignment from Page C.03 Advantages n Ladders for machine installation etc. n Transportable n Assembled n The step can be placed directly against the front of the object n Load up to 500 kg Stringers n Bottom stringer ends with foot pads n Platform stringer with integrated 100 mm high base board 500 kg Support element n Made from aluminium section with cast aluminium connectors n Screwed to stairs and platform n With support element foot pads Dimensions n Platform length 400 mm n Step depth 200 mm n Incline 45 n An incline of up to 78 is possible on request Special equipment (from Page C.30): n Platform extension n Railing n Screw-on bracket for fixed installation instead of foot pads n Perpendicular angled foot ends instead of inclined stringer ends n Set of castors n Handles n Self-closing gate when using railing Individual incline up to 78 possible on request Vertical height Projection Clear width Size Vertical Projection Clear width p. Clear width p. Clear width p. Height 1 ) 600 mm unit 800 mm unit 1000 mm unit m. approx. m. approx. Order No. Order No. Order No. C.24 2 0,40 0,75 3446 0000 02 3448 0000 02 3440 0000 02 3 0,60 0,95 3446 0000 03 3448 0000 03 3440 0000 03 4 0,80 1,15 3446 0000 04 3448 0000 04 3440 0000 04 5 0,99 1,35 3446 0000 05 3448 0000 05 3440 0000 05 1 ) From the floor to the top of the platform

Vario-Step Examples of customised design systems There is a solution to suit every requirement HACA has decades of experience in the area of customised design. We developed the VARIO-STEP range precisely to be able to respond individually to customer wishes. We are happy to meet customer challenges according to the motto»nothing is impossible«. Contact us: on the basis of diagrams, photos and measurements, our Sales Department and Technical Team will be pleased to suggest solutions. In-situ appointments can be arranged at any time. We present our suggestions using 3D drawings. C.25

Steps» range«n Heavy duty work steps n Load 300 kg n For continuous commercial use n DIN EN 14 183-C n Incline 45 n Very heavy base (approx. 500 x 400 mm) n Welded, very stable and warp resistant rectangular tube design n High degree of step safety due to 200 mm deep, non-slip steps n Step chamfering angled inwards, no risk of injury from sharp edges 300 kg Type 7671.00.03 With handrail on both sides Type 7671 standard version with screwed, easily replaceable ladder feet Type 7671.00.01 With handrail left Type 7671.00.02 With handrail right Type 7671.00.03 With handrail on both sides Lifting castor fitting with 2 castors Ø 125 mm for subsequent fitting. Recommended for size 4 + 5. Order No. 0675 6311 00 p. set Ball joint base plates for subsequent fitting on site, e.g. with grating etc. (1 set consists of 4 units) Order No. 0767 0620 00 p. set Size Vertical Base area Weight Type height W x D 7671 p. m. approx. m. approx. kg approx. Order No. unit 2 0,40 0,57 x 0,71 6,8 7671 0000 02 3 0,60 0,61 x 0,95 10,0 7671 0000 03 4 0,80 0,65 x 1,19 12,8 7671 0000 04 5 1,00 0,69 x 1,43 16,5 7671 0000 05 Size Vertical Base area Weight Type Type Type height W x D 7671.00.01 p. 7671.00.02 p. 7671.00.03 p. m. approx. m. approx. kg approx. Order No. unit Order No. unit Order No. unit C.26 3 0,60 0,61 x 0,95 11,2 (12,4) 7671 0001 03 7671 0002 03 7671 0003 03 4 0,80 0,65 x 1,19 14 (15,2) 7671 0001 04 7671 0002 04 7671 0003 04 5 1,00 0,69 x 1,43 17,7 (18,9) 7671 0001 05 7671 0002 05 7671 0003 05

Steps Aluminium work steps n Load 150 kg n DIN EN 14 183-C 150 kg n Large stand surface (approx. 500 x 280 mm) n Stable, warp resistant, welded design for high continuous load n Feet placed at an angle to prevent steps lifting up during use n 200 mm deep, non-slip steps n Step chamfering angled inwards, therefore no risk of injury n Available with steps with grating on request Type 7656.03 With handrail on both sides Type 7656 With screwed, easily replaceable ladder feet Type 7656.01 With handrail on one side (can be used on the right or left) Type 7656.03 With handrail on both sides Lifting castor fitting with 2 castors Ø 125 mm for subsequent fitting. Recommended for size 4 + 5. Order No. 0765 6630 00 p. set Ball joint base plates for subsequent fitting on site, e.g. with grating etc. (1 set consists of 4 units) Order No. 0765 6620 00 p. set Size Vertical Base area Weight Type Type Type height W x D 7656 p. 7656.01 p. 7656.03 p. m. approx. m. approx. kg approx. Order No. unit Order No. unit Order No. unit 1 0,20 0,57 x 0,35 2,2 7656 0000 01 2 0,40 0,62 x 0,55 4,7 7656 0000 02 3 0,60 0,66 x 0,77 7,5 7656 0000 03 7656 0100 03 7656 0300 03 4 0,80 0,70 x 1,00 9,5 7656 0000 04 7656 0100 04 7656 0300 04 5 1,00 0,74 x 1,22 13,0 7656 0000 05 7656 0100 05 7656 0300 05 C.27

Steps Aluminium work steps n Load 150 kg n DIN EN 14 183-C n Large stand surface (approx. 500 x 250 mm) n Stable, warp resistant, welded design for high continuous load n Feet placed at an angle to prevent steps lifting up during use n 200 mm deep, aluminium, grating steps n Extremely non-slip steps (R13) Type 7657 Size Vertical Base area Weight Type Type Type height W x D 7657 1 ) p. 7657.01 2 ) p. 7657.03 3 ) p. m. approx. m. approx. kg approx. Order No. unit Order No. unit Order No. unit 1 0,20 0,57 x 0,35 2,0 7657 0000 01 2 0,40 0,62 x 0,55 5,6 7657 0000 02 3 0,60 0,66 x 0,77 7,6 7657 0000 03 7657 0100 03 7657 0300 03 4 0,80 0,70 x 1,00 9,0 7657 0000 04 7657 0100 04 7657 0300 04 5 1,00 0,74 x 1,22 11,0 7657 0000 05 7657 0100 05 7657 0300 05 1 ) Type 7657 with screwed, easily replaceable ladder feet 2 ) Type 7657.01with handrail on one side (can be used on the right or left) 3 ) Type 7657.03 with handrail on both sides 150 kg C.28

Grating step Aluminium grating step KF n Load 300 kg n Dimensions as requested by the customer n Aluminium grating n Extremely non-slip stand surface (R13) 150 kg n Accessories/special equipment Floor attachment accessories pack Order No. 03 0050 0000 Connector to bridge (to connect two grating steps) Order No. 03 0050 0001 Type 3005 Type 3005 Type 3005 clear width 500 mm Vertical height Outer dimensions Order mm approx. Width x length m. approx. No. per unit 200 550 x 500 3005 0205 00 200 550 x 750 3005 0207 50 200 550 x 1000 3005 0210 00 200 550 x 1250 3005 0212 50 300 550 x 500 3005 0305 00 300 550 x 750 3005 0307 50 300 550 x 1000 3005 0310 00 300 550 x 1250 3005 0312 50 Type 3006 clear width 600 mm Vertical height Outer dimensions Order mm approx. Width x length m. approx. No. per unit 200 650 x 500 3006 0205 00 200 650 x 750 3006 0207 50 200 650 x 1000 3006 0210 00 200 650 x 1250 3006 0212 50 300 650 x 500 3006 0305 00 300 650 x 750 3006 0307 50 300 650 x 1000 3006 0310 00 300 650 x 1250 3006 0312 50 Other dimensions available on request C.29

Special equipment (In conjunction with an order for a Vario-Step design) Article Assigne- Order Additional ment*) No. charge Hooks, with 50 mm Ø instead of hinge at top of stairs 0300 6510 10 None Hooks, with 50 mm Ø as accessory for parked position 0700 6510 10 Stringer and support element ends for fixed installation of the work step S 100 S on the floor (without dowel and screw) instead of foot pads 0344 0530 00 Caster Ø 200 mm Total stop (4 units) Can be used from size 7. The ladder has a cross brace with total stop castors. The support element cross brace is also fitted with total stop castors instead of fixed castors for heavy loads. With these caster fittings the wheel running and pivot movement are jointly blocked or released by lever pressure. This permits the step to be moved in the smallest area. 0354 5710 00 Caster Ø 200 mm Total stop (2 units) Castors with direction lock (2 units). Can be used from size 7. The ladder has a cross brace with total stop castors. Support element cross brace with castors with direction locks. Better movement of the platform step in the desired direction. 0354 5810 00 Perpendicular angled foot ends, 100 S + L range Space-saving. There are no inclined stringer ends as potential tripping points. The projection is reduced by approx. 90 mm with 60 incline and by approx. 120 mm with 45 incline. (For 2 stringers) 0300 9110 00 Perpendicular angled foot ends, 75 L range Space-saving. There are no inclined stringer ends as potential tripping points. The projection is reduced by approx. 90 mm with 60 incline. (For 2 stringers) 0700 9110 00 Platform enlargements for platform steps (without support element) and bridges 100 S range In 200 mm grid up to max. 1400 mm. Longer platforms on request. Lichte Weite 600 mm 0316 0000 00 Lichte Weite 800 mm 0318 0000 00 Lichte Weite 1000 mm 0310 0000 00 C.30 *) Assignment to the corresponding product (see Page C.03)

Special equipment (In conjunction with an order for a Vario-Step design) Article Assigne- Order Additional ment*) No. charge *) Assignment to the corresponding product (see Page C.03) Platform enlargements for platform steps (without support element) 75 L range In 150 mm grid up to max. 1200 mm. Longer platforms on request (for fixed installation). Clear width 500 mm 0716 0500 00 Clear width 600 mm 0716 0600 00 Platform enlargements for platform steps (with support element) 100 S range In 200 mm grid up to max. 1400 mm. Longer platforms on request. Clear width 600 mm 0326 0000 00 Clear width 800 mm 0328 0000 00 Clear width 1000 mm 0320 0000 00 Platform enlargements for work steps 100 S range In 200 mm grid up to approx. 1000 mm. Longer platforms on request (for fixed installation). Clear width 600 mm 0344 0100 00 Clear width 800 mm 0344 0300 00 Clear width 1000 mm 0344 0400 00 Set of castors To move the steps like a wheelbarrow. From Size 3. Assembled. 0344 5512 00 Bracket on bottom of stairs hot-dip galvanised, for fixed installation of stairs on the floor (without dowel and screws) instead of foot pads in 75 L range. 0700 7510 00 Foot pads Screwed-on with fixing screws to prevent damage to floor. Instead of the standard brackets on the bottom of stairs with fixed installation. For 60 incline 0300 7660 10 For 45 incline 0300 7645 10 For perpendicular angled foot ends 0300 7690 10 For all other angles 0300 7699 10 Additional railing At the front and on the right Exit left (in upwards direction). Including release mechanism on the left. Railing on both sides on the ladder 0310 5402 00 Additional railing At the front and on the left Exit right (in upwards direction). Including release mechanism on the right. Railing on both sides on the ladder 0310 5403 00 C.31

Special equipment (In conjunction with an order for a Vario-Step design) Article Assign- Order Additional ment*) No. charge End cap For step stringer in the 100 S/L range Stringer dimension 104 x 30.5 mm (2-unit set). 0300 4810 00 End cap For platform stringer in the 100 S/L range. Stringer dimension 104 x 30.5 mm (2-unit set). 0300 4710 00 End cap For stringer in the 75 L range Stringer dimension 75 x 25 mm (2-unit set). 0700 4510 00 Aluminium step, 100 L range With 4 fixing screws Step size 600 x 250 mm 0300 0600 00 Step size 800 x 250 mm 0300 0800 00 Step size 1000 x 250 mm 0300 0700 00 Aluminium step, 75 L range With 4 fixing screws Step size 500 x 150 mm 0700 2500 00 Step size 600 x 150 mm 0700 2600 00 Castors for heavy loads Ø 200 mm Complete with screws for fixing to cross brace, for Type 3546.56/3548.56. 0354 5600 01 Hooks, Ø 50 mm 0300 6510 00 Hooks Hook mechanism, hot-dip galvanised (2 units) to hook in the hooks for the 75 L/100 S + L range 0700 6410 00 Railing Made from hot-dip galvanised steel tubing, with knee rails, platform railing height 1100 mm, entry on ladder and platform. 0344 0900 00 Railing Made from hot-dip galvanised steel tubing, for the front of the platform, comprising handrail, knee and foot rail, height 1100 mm 0310 5401 00 Threaded rods (20 units) With hexagon socket and cup point, for securing the end caps 0301 0500 20 Threaded rods (20 units) With hexagon socket and cup point, for securing the railing tubes with tube connectors from the 0301 range. 0301 0600 20 C.32 *) Assignment to the corresponding product (see Page C.03)

Special equipment (In conjunction with an order for a Vario-Step design) Article Assign- Order Additional ment*) No charge *) Assignment to the corresponding product (see Page C.03) Handle Simplifies lifting and moving the work steps in the 100 S range (set = 2 units) 0300 7720 00 Stainless steel T-bolt M8 x 18 m (set = 4 units), to secure the steps, tube connector and fittings on the stringer. 0300 3901 04 Lever roller To lift the stairs. With storage mechanism directly on the stairs. Recommended from size 8. 0354 5310 00 Stringer and support element ends For fixed installation. With screw-on brackets on the support and climbing element (without dowel and screw). In the case of subsequent modification, the vertical height is reduced by 20 mm. 0344 0520 00 Caster Ø 200 mm With total stop locks, complete with screws to secure to the cross brace, for Type 3546.56/3548.56 0354 5700 01 Caster Ø 200 mm With direction locks, complete with screws to secure to the cross brace, for Type 3546.56/3548.56 0354 5700 02 Caster Ø 125 mm With total stop locks, complete with screws to secure to the cross brace, for Type 3666.54, size 4/5 0366 6001 00 Perforated sheet steps, hot-dip galvanised, 100 S range With 4 fixing screws, Step dimension 500 x 200 mm 0300 2510 00 Step dimension 500 x 225 mm 0300 2525 00 Step dimension 600 x 200 mm 0300 2610 00 Step dimension 600 x 225 mm 0300 2625 00 Step dimension 800 x 200 mm 0300 2810 00 Step dimension 800 x 225 mm 0300 2825 00 Step dimension 1000 x 200 mm 0300 2010 00 Step dimension 1000 x 225 mm 0300 2025 00 Perpendicular/horizontal supports for steps, 100 S/L range Positioned perpendicular on the ground or horizontally on a wall. Adjustment range approx. 1.33 2.33 m 0300 9001 00 Perpendicular/horizontal supports for steps, 75 L range Positioned perpendicular on the ground or horizontally on a wall. Adjustment range approx. 1.33 2.33 m 0700 9001 00 C.33

Special equipment (In conjunction with an order for a Vario-Step design) Article Assign- Order Additional ment*) No. charge Caster fitting (2 units) To move the step like a wheelbarrow. From size 3. Not assembled. 0344 5513 00 Angled supports, 100 L/S range With bracket for wall-side stair or platform stringers, made from special aluminium section, connecting elements steel/hot-dip galvanised For steps, clear width 600 mm 0300 9260 00 For steps, clear width 800 mm 0300 9280 00 For steps, clear width 1000 mm 0300 9210 00 For steps, clear width 600 mm 0300 9560 00 For steps, clear width 800 mm 0300 9580 00 For steps, clear width 1000 mm 0300 9510 00 Angled supports, 75 L range With bracket for wall-side stair or platform stringers, made from special aluminium section, connecting elements steel/hot-dip galvanised For steps 0700 9210 00 For platforms 0700 9411 00 Gate Self-closing, pre-assembled as guard. A platform enlargement of at least one grid position is needed for platform steps with clear width 800/1000 mm, and railing must be present on one side. Clear width 500 mm 0300 8200 05 Clear width 600 mm 0300 8200 06 Clear width 800 mm 0300 8200 08 Clear width 1000 mm 0300 8200 10 Additional pair of hooks, 75 range For space-saving vertical hanging of steps when not in use 0700 6510 00 Cylinder screw With hexagon socket, with nut and snap ring, to connect individual tube connectors from the 0301 range 0099 0500 00 C.34 *) Assignment to the corresponding product (see Page C.03)

»0301 range«for tube Ø 30 mm Tube connector for light constructions n DIN EN ISO 14 122 n Cast aluminium, untreated surface, DIN EN 573-3 n T-bolts, swivel screws and tube clamping bolts made from stainless steel n Use For light constructions and horizontal forces of up to 30 dan/m in accordance with DIN EN ISO 14 122»Stationary work platforms including means of access«for the inspection and maintenance areas. With connection elements for the VARIO-STEP range. Any coloured finish must be applied by the customer. n Installation Screw connections using screws with cup point. Tubes with an outer diameter of 30 +0.15 0.20 mm made from aluminium, electro galvanised steel tubing (unsuitable for outdoor use) or hot-dip galvanised steel tubing, galvanised in blast procedure (see Type 0300.43, 0300.44, Page C.37), can be used. Conventional hot-dip galvanised tubes are unsuitable due to the thick layer of zinc. Aluminium tubes must have a minimum wall thickness of 2.5 mm irrespective of their structural design so that they can be correctly connected. If railing tubing is provided by the customer, corresponding proof of structural stability certificate must be obtained. The tightening torque of adjuster bolts is 40 Nm. Order No. 0301 5410 00 Stair stringer adapter to fit stringers in the Vario-Step 100 range, with T-bolts. 1 Order No. 0701 5410 00 Stair stringer adapter with hinge, for stringers in the Vario-Step 75 range, with T-bolts. 2 Order No. 0301 3938 01 Stair stringer adapter with hinge, for stringers in the Vario-Step 100 range, with T-bolts. 3 Order No. 0701 3938 01 Stair stringer adapter 4 Order No. 0301 1000 00 Floor/wall plate, small. 5 Order No. 0301 4238 014,0 Floor/wall plate, small, 6 with hinge, for stringers in the with hinge connector. Vario-Step 75 range, with T-bolts. 7 Order No. 0301 1200 00 Order No. 0301 1100 0017, 8 Order No. 0301 5200 00 0 9 Floor/wall plate, large, with Wall plate Tee mounting plate, Ø 80 mm, for lateral connection. to be screwed to support crosswise by the customer. C.35

»0301 range«for tube Ø 30 mm Order No. 0301 5300 00 Cross piece 10 Order No. 0301 4038 01 11 Order No. 0301 4138 01 12 Angle with hinge adapter. Tee with hinge adapter. Order No. 0301 4545 00 Corner hinge with passage. 13 Order No. 0301 4546 00 14 Order No. 0301 5038 01 15 Corner hinge, closed. End piece with hinge adapter. 20 Order No. 0301 5138 01 Passage piece with hinge adapter 16 Order No. 0301 3838 01 Hinge joint piece, universal. 17 Order No. 0301 6400 00 Angle piece, 150. 18 Order No. 0301 5700 00 Angle piece, 90. 19 Order No. 0301 4400 00 20 Order No. 0301 1300 00 21 Angle piece, 135. Roller bearing connector, 90 180 infinitely adjustable. C.36 Order No. 0301 5800 00 Tee, 2-shell 22 Order No. 0301 5900 00 23 Order No. 0301 1400 00 24 Double clamp, 2-shell Tube connector, straight, infinitely adjustable

»0301 range«for tube Ø 30 mm Accessories Order No. 0300 4300 00 Steel tubing Ø30x1,5 +0,15 0,20 mm, hot-dip galvanised in blasting procedure, in manufactured lengths of approx. 6 m. per linear metre Order No. 0300 4400 00 As above but cut to fixed lengths and deburred per linear metre Please note! Order No. 0301 0410 00 Plastic caps (set of 10) for tube, Ø 30 mm. per set 1. Under DIN EN ISO 14 122-3, stationary steps over 500 mm must have a handrail on at least one side. 2. In the case of stairs with more than 4 steps and stairs with a width of more than 1.50 m, handrails must be used on both sides. 3. Railings must be fitted for all work areas and thoroughfares with a fall height of over 500 mm and all areas with danger to life and health. 4. Railing height under DIN EN ISO 14 122-3: 1.10 m. 5. To prevent falling through the railing, at least one knee rail with a maximum distance to the next component of 500 mm and a base board of at least 100 mm must be attached to platforms, work platforms etc. Examples Handrail End support Knee tubing Middle support Corner support 20 for 45 18 for 60 17 and 21 for all other angles Please note! Railings are used with or without base board depending on purpose, e.g. barricades, guards etc. The respective applicable safety requirements must be considered during their design. C.37

»0303 range«for HACA section 50 x 30 mm 9,5 35 60 30 Order No. 0303 0701 00 Adapter, short. 1 Order No. 0303 1000 00 2 Order No. 0303 1100 00 3 Adapter, long. Floor adapter Order No. 0300 3901 04 T-bolt made from stainless steel (V4A) M8 x 18 (set = 4 units) per set Order No. 0303 0200 00 Tee Adapter flat. 4 Order No. 0303 0800 00 Tee Adapter upright. 5 Order No. 0303 0502 00 Corner connector (as shown) right, with triple bar 6 connector. Order No. 0303 0501 00 Corner connector left (otherwise as above). 6a Order No. 0303 0310 00 Pivoting adapter for bar connector. 7 Order No. 0303 0410 00 Adapter, flat, for bar connector. 8 Order No. 0303 0610 00 Adapter, upright, for bar connector. 9 C.38 Order No. 0099 0500 00 Cylinderscrew with nut and cup point (for No. 7, 8 and 9)

0303 range Accessories for section connectors 30 50 Wx = 3,75 cm 3 Wy = 7,52 cm 3 G = 1,52 kg/m Order No. 0300 1800 00 Support element section made from aluminium in manufactured length of approx. 6,0 m. per linear m 50 30 Wx = 5,9 cm 3 Wy = 3,6 cm 3 G = 1,87 kg/m Order No. 0300 1600 00 Support elemen section with screw channels, made from aluminium in manufactured lengths of approx. ca. 6,0 m. per linear m 1 5 4 9 7 1 4 7 8 5 7 2 6 Order No. 0300 3901 04 Stainless steel T-bolt, M 8 x 18 mm (set = 4 units) per set 3 6a 3 Example of application C.39