Hose & Cable Reel Product Catalogue quality industry solutions Lubrication Management Systems Material Dispensing Management Systems Hose & Cable Management Systems Diesel & Fluid Management Systems Fire Extinguisher & Suppression Systems Onboard Weighing & CCTV Systems Flow Measurement Systems General Lubrication & Exhaust Extraction
Hose & Cable Reels has hose and cable reels that have been designed with quality, strength, durability and serviceability in mind. Whether it be material dispensing, ergonomics, environmental and OH & S issues, cable storage or hose storage, we have Hose Reels which are available in either manual, spring, air or hydraulic rewind configuration and spring rewind Cable Reels that carry DC or AC Voltages of differing cable sizes with the power transference in the spring rewind Cable Reels is through slip rings enclosed in a weather-tight enclosure. The Hose Reels are designed to handle hose diameters from 4" to 2". Several models can be supplied upon request without any aluminium parts making them suitable for underground coal mining use. OH & S is a major concern for companies with potential problems caused by hoses and electrical cables lying around shop floors or hanging from ceilings. These problems can affect maintenance costs and create potentially unsafe areas. JSG provides hose and cable reels which are designed to safely rewind and store hose and cable away from hazardous locations on service vehicles, machinery or shop floor and thereby providing a safer working environment. Hose Reel Selection is commonly based on duty cycle, mode of retraction, product to be dispensed, hose capacity, pressure rating and flow rate. The selection of a hose reel can vary greatly according to model and intended use. Commonly dispensed products when using hose reels include Air, Water, Oil and Grease. Cable Reel Selection is based on retrieval application, cable size, number of conductors active travel, cable type and environment. To confirm that your hose reel selection is suitable for your application please contact your nearest JSG representative. Zener Crane SM Reel Service Truck Page 2
Contents Cobra Hose Reels Features & Benefits 4 Cobra & Custom Hose Reels 2" ~ 2" Manual Rewind Hose Reels without Hose Kit 6 Cobra Hose Reels 2" Manual Rewind Hose Reels with Hose Kit 7 4" ~ 8" Spring Rewind Hose Reels without Hose Kit 8 4" ~ 8" Spring Rewind Hose Reels with Hose Kit 9 2" Spring Rewind Hose Reels without Hose Kit 0 2" Spring Rewind Hose Reels with Hose Kit 4" ~ 2" Spring Rewind Hose Reels without Hose Kit 2 4" ~ 2" Spring Rewind Hose Reels with Hose Kit 2" ~ 2" Direct Hydraulic Drive or Air Drive Hose Reels without Hose Kit 4 2" ~ 2" Direct Hydraulic Drive or Air Drive Hose Reels with Hose Kit 5 Cobra and Lincoln Hose Stops 6 Gleason Cable Reels Static Discharge Cable Reels 7 Electrical Cable Reels 8 Hose Reel Dimensions Cobra & Custom Manual Rewind Hose Reels 9 Cobra MP00 Series Hose Reels 20 Cobra GP2000 Series Spring Rewind Hose Reels 20 Cobra GPE Series Spring Rewind Hose Reels 2 Cobra NS200 Series Spring Rewind Hose Reels 2 Cobra NS600 ~ NS800 Spring Rewind Series Hose Reels 22 Cobra NS600 ~ NS800 Direct Hydraulic Drive Hose Reels 2 Cobra NS600 ~ NS800 Direct Air Drive Hose Reels 24 Cobra NS000 ~ NS800 Direct Air Drive Hose Reels 25 Gleason Open & Enclosed Static Discharge Cable Reels 26 Page
Hose Reel Features & Benefits Cobra Hose Reels Cobra Hose Reels are open style hose reels available in manual, spring retractable or direct drive configuration. The cobra hose reels are designed for heavy duty use. Their high strength frames and quality design make them the ideal reel to be used in rugged environments where the demand for a reliable hose reel with high flow rates, large hose capacity and a high duty cycle is a necessity. Upon request, Hose Reels can be supplied having no aluminium components making them acceptable for underground coal mine use. Compact, high strength rigid frame and drum combines superior strength with a compact design for space limiting installations Improved durable epoxy powder coating process for long life and scratch resistant finish Sealed roller bearings fitted with covers to stop dirt or high pressure water ingress in machine washdown Chrome Plated roller outlet guides are fitted to all 4 to 2 hose reels for durability and ease of operation NEW Gooseneck design improves the flow rates Factory lubricated power spring contained in a fully sealed serviceable canister. All Series 600 and above have externally mounted power springs for ease of replacement in the field if required All new oil swivels on lube reels are BSP in configuration complete with Dowty washers. Super swivels are used on the Grease Hose reels to allow hose retraction even while under full pressure. The swivels used have a full flowpath and are able to withstand heavy sideloads Drum spaces precision machined to improve drum alignment and prevent runout The hose reel latch pawl and spring are attached to a service plate Colour Coding Identification AIR OIL GREASE DIESEL Refer to Hose with Hose Reel table Example: Cobra 09-NS800-HD/LDF-6/6 Hose Reel Page 4
Hose Reel Features & Benefits Features New improved flow path goose neck design C/W JIC male fitting & shaft incorporates spanner fitment slot Benefits Increase flow rate ease of hose fitment, reduced leak potential, ability to hold shaft in position whilst connecting swivel New service plate cover on NS series reels C/W PAWL, spring and pin assembly Ease of replacement and focus on safety WARNING SERVICE POINT Do not remove this cover other than for service purposes New PAWL design Improve quality and enable PAWL swivelling freely All new oil swivels on lube reels, BSP configuration C/W dowty washers New design on hose guide brackets C/W chrome plated rollers Ease of swivel fitment and improved sealing method, improve quality Improve retract ability and reduce hose friction. Longer hose life Redesign drum spacers, CNC machined Improved drum allignment, close tolerances - improved quality Powder coating New process, improved adhesion and finish Direct drive reels have new drum design Improved drum allignment and quality factor New packing material New tri wall boxes, reduce the risk of product being damamged, eliminate product shifting in transport Page 5
Cobra & Custom Reeling 2 to 2 Manual Rewind Hose Reels without Hose Kit With a long hose length capacity the Cobra HW Series manual rewind hose reels are suitable for dispensing lubricating oils, air and water in general, agricultural and mining industries where high hose lengths do not permit spring rewind and no other power medium is available. Special Features Geared Crank allows rewinding from the front of reel Fitted with adjustable brake to prevent free reeling Long Hose Capacity up to 60m When rewinding overcomes hose and weight Large Hose diameters up to ½ I.D. Hose Crank Rewind Series 2 & 4 Manual Rewind Hose Reels without Hose Kit Swivel Inlet Thread Outlet Thread 09-HW00-0/08 Bare Manual Rewind Reel 2 ~ 4 0m 4 BSPP Female 6 JIC Male 200 bar 09-HW400-50/08 Bare Manual Rewind Reel 2 ~ 4 50m 4 BSPP Female 6 JIC Male 200 bar 4 to 2 Crank Rewind Hose Reels without Hose Kit Swivel Inlet Thread Outlet Thread 20-920-0F-GR2 Bare Gear Crank Rewind Reel 4 0m 4 NPT 4 NPT 200 bar 20-920-60F-GS Bare Gear Crank Rewind Reel 4 60m 4 NPT 4 NPT 200 bar 20-925-0F-GR2 Bare Gear Crank Rewind Reel 0m NPT NPT 200 bar 20-925-0C-GR2 Bare Gear Crank Rewind Reel 0m NPT NPT 40 bar 20-925-60C-GR2 Bare Gear Crank Rewind Reel 60m NPT NPT 40 bar 20-940-5C-GR2 Bare Gear Crank Rewind Reel 2 5m 2 NPT 2 NPT 40 bar 20-940-0C-GS Bare Gear Crank Rewind Reel 2 0m 2 NPT 2 NPT 40 bar 20-940-60C-GS Bare Gear Crank Rewind Reel 2 60m 2 NPT 2 NPT 40 bar Hoses available on request for the Crank Rewind Reels Refer to page 9 to 26 for Hose Reel dimensional drawings Page 6
Cobra & Custom Reeling 2 Manual Rewind Hose Reels with Hose Kit The hoses used on these reels are of the recommended maximum length and pressure rating, bar for Air/Water hoses and 200 bar for the Oil hoses. The hose outlet end fittings for these reels are ½ BSPT Male, which accommodates most common accessories for this hose size and hose reel application. Special Features Manual rewind from the side of reel Fitted with adjustable brake to prevent free reeling Long hose length capacity Durable Blue Epoxy Powder Coated finish No Aluminium Components HW Series 2 Manual Rewind Hose Reels with Air/Water Hose Kit 9-HW00-0/08A 9-HW400-50/08A Manual Rewind Reel with Air/Water Hose Manual Rewind Reel with Air/Water Hose Swivel Inlet Thread Hose End Fitting Thread 2 0m 4 BSPP Female 2 BSPT Male bar 2 50m 4 BSPP Female 2 BSPT Male bar ½ Crank Rewind Hose Reels with Oil Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-HW00-0/08F 9-HW400-50/08F Manual Rewind Reel with Oil Hose Manual Rewind Reel with Oil Hose Hose Kit comprises of ; Main Hose assembly, Hose stop & metre whip hose 2 0m 4 BSPP Female 2 BSPT Male 200 bar 2 50m 4 BSPP Female 2 BSPT Male 200 bar Refer to page 9 to 26 for Hose Reel dimensional drawings Page 7
Cobra Hose Reels 4 & 8 Spring Rewind Hose Reels without Hose Kit The Cobra series of 4 & 8 spring retractable reels are suitable for dispensing lubricating oils, petrochemical products, air and water and with their compact frame and high strength are ideal for mining, general industry and automotive workshops. The MP00 series hose reel is designed as a very compact grease hose reel and is commonly installed in excavator tool boxes and used in conjunction with the JSG compact pump stations. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life Optimum weight to strength ratio Heavy gauge steel components 09-GPE-HPG-5/06 4 & 8 Spring Rewind Hose Reels without Hose Kit Swivel Inlet Thread Outlet Thread 09-MP00-AWL-0/04 Bare Spring Rewind Grease Reel 4 0m 4 BSP Female 7 6 JIC Male 00 bar 09-GPE-HPG-5/06 Bare Spring Rewind Grease Reel 4 ~ 8 5m 2 NPT Female 9 6 JIC Male 50 bar 09-GP2000-HPG-5/06 Bare Spring Rewind Grease Reel 4 ~ 8 5m 2 NPT Female 9 6 JIC Male 400 bar 09-NS200-HPG-5/06 Bare Spring Rewind Grease Reel 4 ~ 8 5m 2 NPT Female 9 6 JIC Male 400 bar 09-GPE-AWL-5/08 Bare Spring Rewind Reel 8 5m 2 BSPP Female 4 JIC Male 00 bar 09-GP2000-AWL-5/08 Bare Spring Rewind Reel 8 5m 2 BSPP Female 4 JIC Male 00 bar 09-NS600-HPG-25/06 Bare Spring Rewind Grease Reel 8 25m 2 NPT Female 9 6 JIC Male 400 bar For standard 8 AWL Reels without Hose Kit refer to 2 Hose Table page 0 Refer to page 9 to 26 for Hose Reel dimensional drawings Page 8
Cobra Hose Reels 4 & 8 Spring Rewind Hose Reels with Hose Kit The hoses used on these reels are of the recommended maximum length and pressure rating. The hose outlet end fittings for the Air/Water and Oil reels are BSPT Male, which accommodates most common accessories for this hose size and hose reel application. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life NS600 series Bare Reel 4 & 8 Spring Rewind Hose Reels with Air/Water Hose Kit Max. Hose Swivel Inlet Thread Hose End Fitting Thread 9-GPE-AWL-5/06A Spring Rewind Reel with Air/Water Hose 8 5m 2 BSPP Female 8 BSPT Male bar 9-GP2000-AWL-5/06A Spring Rewind Reel with Air/Water Hose 8 5m 2 BSPP Female 8 BSPT Male bar 4 & 8 Spring Rewind Hose Reels with Oil Hose Kit Max. Hose Swivel Inlet Thread Hose End Fitting Thread 9-MP00-AWL-0/04F Spring Rewind Reel with Oil Hose 4 0m 4 BSPP Female 7 6 JIC Female 00 bar 9-GPE-AWL-5/06F Spring Rewind Reel with Oil Hose 8 5m 2 NPT Female 8 BSPT Male 00 bar 9-GP2000-AWL-5/06F Spring Rewind Reel with Oil Hose 8 5m 4 BSPPT Female 8 BSPT Male 60 bar 8 Spring Rewind Hose Reels with Grease Hose Kit 9-GPE-HPG-5/06G 9-GP2000-HPG-5/06G 9-NS200-HPG-5/06G 9-NS600-HPG-25/06G Dual Arm Open Grease Reel with Grease Hose Dual Arm Open Grease Reel with Grease Hose Dual Arm Open Grease Reel with Grease Hose Dual Arm Open Grease Reel with Grease Hose Max. Hose Swivel Inlet Thread Hose End Fitting Thread 8 5m 2 NPT Female 8 BSPT Male 50 bar 8 5m 2 NPT Female 8 BSPT Male 50 bar 8 5m 2 NPT Female 8 BSPT Male 50 bar 8 25m 2 NPT Female 8 BSPT Male 50 bar Hose Kit comprises of ; Main Hose assembly, Hose stop & metre whip hose Refer to page 9 to 26 for Hose Reel dimensional drawings Page 9
Cobra Hose Reels 2 Spring Rewind Hose Reels without Hose Kit The Cobra range ½ AWL and HPG spring retractable reels are suitable for dispensing lubricating oils, petrochemical products, air and water in the mining, general industry and truck and bus service markets. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life Optimum weight to strength ratio 09-NS200-AWL-5/08 2 Spring Rewind Hose Reels without Hose Kit Swivel Inlet Thread Outlet Thread 09-GPE-AWL-5/08 Bare Spring Rewind Reel 2 5m 2 BSPP Female 4 JIC Female 00 bar 09-GP2000-AWL-5/08 Bare Spring Rewind Reel 2 5m 4 BSPP Female 4 JIC Male 220 bar 09-NS200-AWL-5/08 Bare Spring Rewind Reel 2 5m 2 BSPP Female 4 JIC Male 00 bar 09-NS600-AWL-0/08 Bare Spring Rewind Reel 2 0m 4 BSPP Female 6 JIC Male 220 bar Refer to page 9 to 26 for Hose Reel dimensional drawings Page 0
Cobra Hose Reels 2 Spring Rewind Hose Reels with Hose Kit The hoses used on these reels are of the recommended maximum length and pressure rating. The hose outlet end fittings for the Air/Water and Oil reels are ½ NPT Male, which accommodates most common accessories for this hose size and hose reel application. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life 09-GP2000 Series Bare Reel 2 Spring Rewind Hose Reels with Air/Water Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-GPE-AWL-5/08A Spring Rewind Reel with Air/Water Hose 2 5m 2 BSPP Female 2 BSPT Male bar 9-GP2000-AWL-5/08A Spring Rewind Reel with Air/Water Hose 2 5m 2 BSPP Female 2 BSPT Male bar 9-NS200-AWL-5/08A Spring Rewind Reel with Air/Water Hose 2 5m 2 BSPP Female 2 BSPT Male bar 9-NS600-AWL-8/08A Spring Rewind Reel with Air/Water Hose 2 8m 4 BSPP Female 2 BSPT Male bar 9-NS600-AWL-0/08A Spring Rewind Reel with Air/Water Hose 2 0m 4 BSPP Female 2 BSPT Male bar 2 Spring Rewind Hose Reels with Oil Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-GPE-AWL-5/08F Spring Rewind Reel with Oil Hose 2 5m 2 BSPP Female 2 BSPT Male 00 bar 9-GP2000-AWL-5/08F Spring Rewind Reel with Oil Hose 2 5m 2 BSPP Female 2 BSPT Male 00 bar 9-NS200-AWL-5/08F Spring Rewind Reel with Oil Hose 2 5m 2 BSPP Female 2 BSPT Male 00 bar 9-NS600-AWL-8/08F Spring Rewind Reel with Oil Hose 2 8m 4 BSPP Female 2 BSPT Male 00 bar 9-NS600-AWL-0/08F Spring Rewind Reel with Oil Hose 2 0m 4 BSPP Female 2 BSPT Male 00 bar 2 Spring Rewind Hose Reels with Grease Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-NS600-HPG-25/08G Spring Rewind Reel with Grease Hose 2 25m 2 NPT Female 2 BSPT Male 50 bar Hose Kit comprises of ; Main Hose assembly, Hose stop & metre whip hose Refer to page 9 to 26 for Hose Reel dimensional drawings Page
Cobra Hose Reels 4 to 2 Spring Rewind Hose Reels without Hose Kit The Cobra series of 4 to 2 spring retractable Hose Reels are designed for mining, heavy industrial applications. They are suitable for dispensing lubricating oils, petrochemical products, diesel fuel, air and water. With their compact frame these reels are ideal for such applications as quarry and mining service vehicles and workshops. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life Optimum weight to strength ratio All bolted heavy gauge steel components 09-NS000-LDF-25/6 4 to 2 Spring Rewind Hose Reels without Hose Kit Swivel Inlet Thread Outlet Thread 09-NS600-AWL-5/2 Bare Spring Rewind Reel 4 5m 4 BSPP Female 6 JIC Male 220 bar 09-NS800-LDF-5/6 Bare Spring Rewind HD Reel 5m BSPP Female 5 6 JIC Male 00 bar 09-NS000-LDF-25/6 Bare Spring Rewind HD Reel 25m BSPP Female 5 6 JIC Male 00 bar 09-NS800-LDF-5/24 Bare Spring Rewind HD Reel 2 5m 2 BSPP Female 7 8 JIC Male 00 bar Refer to page 9 to 26 for Hose Reel dimensional drawings Page 2
Cobra Hose Reels 4 to 2 Spring Rewind Hose Reels with Hose Kit The hoses used on these reels are of the recommended maximum length and pressure rating. The hose outlet end fittings for the ¾ ~ ½ Hose Reels is NPT male and correspond to the hose size fitted to the reels e.g. hose ~ NPT male, this thread size accommodates most common accessories for this hose size and hose reel application. Special Features Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish No Aluminium Components High Flow main shaft assembly Sealed spring for longer life 09-28-NS800 Series Bare Reel 4 to 2 Spring Rewind Hose Reels with Air/Water Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-NS600-AWL-5/2A Spring Rewind Reel with Air /Water Hose 4 5m 4 BSPP Female 4 BSPT Male 40 bar 4 to 2 Spring Rewind Hose Reels with Oil Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-NS600-AWL-5/2F Spring Rewind Reel with Oil Hose 4 5m 4 BSPP Female 4 BSPT Male 00 bar 9-NS800-LDF-5/6F Spring Rewind Reel with Oil Hose 5m BSPP Female BSPT Male 00 bar 9-NS800-HDLDF-5/6F Spring Rewind Reel with Oil Hose 5m BSPP Female BSPT Male 00 bar 9-NS000-LDF-25/2F Spring Rewind Reel with Oil Hose 4 25m BSPP Female 4 NPT Male 00 bar 9-NS000-LDF-25/6F Spring Rewind Reel with Oil Hose 25m BSPP Female BSPT Male 00 bar 4 to 2 Spring Rewind Hose Reels with Diesel Hose Kit Swivel Inlet Thread Hose End Fitting Thread 9-NS800-LDF-5/6D Spring Rewind Reel with Diesel Hose 5m BSPP Female BSPT Male 40 bar 9-NS000-LDF-25/6D Spring Rewind Reel with Diesel Hose 25m BSPP Female BSPT Male 40 bar 9-NS800-LDF-5/20D Spring Rewind Reel with Diesel Hose 4 5m 2 BSPP Female 9-NS800-LDF-5/24D Spring Rewind Reel with Diesel Hose 2 5m 2 BSPP Female Hose Kit comprises of ; Main Hose assembly, Hose stop & metre whip hose ¼ BSPT Male 40 bar 2 BSP Male 40 bar Refer to page 9 to 26 for Hose Reel dimensional drawings Page
Cobra Hose Reels 2 to 2 Direct Hydraulic Drive & Direct Air Drive Hose Reels without Hose Kit The Direct Drive series of ½ to ½ Hose Reels are designed for applications requiring long or large diameter hoses in mining, quarrying and heavy industrial applications. They are suitable for dispensing lubricating oils, petrochemical products, diesel fuel, air and water. There are two drives are available for the direct drive hose reels, Air or Hydraulic. Note: The Cobra Direct Air Drive Hose Reels do not include a Brake Throttle. This part is to be ordered separately - Part No. 09-994-0004 Special Features New Design Rotary Piston Air Motor Compact Frame High Strength Frame and Drum Durable Blue Epoxy Powder Coated finish High Flow main shaft assembly Two drive styles available - Air or Hydraulic All bolted, heavy gauge steel components 09-NS000-HML-26/6 09-NS600-AMBG-25/06 NEW DESIGN AIR MOTORS Cobra Direct Air Drive Hose Reels, with brake, without Hose Kit 09-NS600-AMBL-0/08 Oil/Water Hose Reel C/W AM 50 Air Motor 09-NS600-AMBG-25/06 Grease/Water Hose Reel C/W AM 50 Air Motor 09-NS800-AMBL-5/6 Oil/Water/Diesel Hose Reel C/W AM 50 Air Motor 09-NS000-AMBL-25/6 Oil/Water/Diesel Hose Reel C/W AM 50 Air Motor 09-NS800-AMBL-5/24 Oil/Diesel Hose Reel C/W AM 50 Air Motor Swivel Inlet Thread Outlet Thread ½ 0m ¾ BSPP Female /6 JIC Male 220bar /8 25m ½ NPT Female 9 /6 JIC Male 400bar 5m BSPP Female 5 /6 JIC Male 220bar 25m BSPP Female 5 /6 JIC Male 220bar ½ 5m ½ BSPP Female 7 /8 JIC Male 220bar Cobra Direct Hydraulic Drive Hose Reels without Hose Kit 09-NS600-HML-0/08 Oil/Water Hose Reel C/W BPM 80 Hyd. Motor 09-NS600-HMG-25/06 Grease/Water Hose Reel C/W BPM 80 Hyd. Motor 09-NS800-HML-5/6 Oil/Water/Diesel Hose Reel C/W BPM 80 Hyd. Motor 09-NS000-HML-25/6 Oil/Water/Diesel Hose Reel C/W BPM 80 Hyd. Motor 09-NS800-HML-5/24 Oil/Water/Diesel Hose Reel C/W BPM 80 Hyd. Motor Swivel Inlet Thread Outlet Thread ½ 0m ¾ BSPP Female /6 JIC Male 220bar /8 25m ½ NPT Female 9 /6 JIC Male 400bar 5m " BSPP Female 5 /6 JIC Male 220bar 25m BSPP Female 5 /6 JIC Male 220bar ½ 5m ½ BSPP Female 7 /8 JIC Male 220bar Refer to page 9 to 26 for Hose Reel dimensional drawings Page 4
Cobra Hose Reels 2 to 2 Direct Hydraulic Drive & Direct Air Drive Hose Reels with Hose Kit The hoses used on these reels are of the recommended maximum length and pressure rating. The hose outlet end fittings accommodates most common accessories for this hose size and hose reel application. Direct Drive Air and Hydraulic Hose Reels with Hose Kit 9-NS600-AMBL-0/08 9-NS600-HML-0/08 9-NS600-AMBG-25/06 9-NS600-HMG-25/06 9-NS800-AMBL-5/6 9-NS800-HML-5/6 9-NS000-AMBL-25/6 9-NS000-HML-25/6 9-NS800-AMBL-5/24 9-NS800-HML-5/24 Direct Air Drive Hose Reel with Brake, Oil Hose and Hose stop Direct Hydraulic Drive Hose Reel Oil Hose and Hose stop Direct Air Drive Hose Reel with Brake, Grease Hose and Hose stop Direct Hydraulic Drive Hose Reel Grease Hose and Hose stop Direct Air Drive Hose Reel with Brake, Oil Hose and Hose stop Direct Hydraulic Drive Hose Reel Oil Hose and Hose stop Direct Air Drive Hose Reel with Brake, Oil Hose and Hose stop Direct Hydraulic Drive Hose Reel Oil Hose and Hose stop Direct Air Drive Hose Reel with Brake, Oil/Diesel Hose and Hose stop Direct Hydraulic Drive Hose Reel Oil/Diesel Hose and Hose stop Swivel Inlet Thread Hose End Fitting Thread ½ 0m ¾ BSP Female ½ BSP Male 200 bar ½ 0m ¾ BSP Female ½ BSP Male 200 bar /8 25m ½ NPT Female /8 BSPT Male 40 bar /8 25m ½ NPT Female /8 BSPT Male 40 bar 5m BSP Female BSPT Male 00 bar 5m BSPP Female BSPT Male 00 bar 25m BSP Female BSPT Male 00 bar 25m BSP Female BSPT Male 00 bar ½ 5m ½ BSP Female ½ BSPT Male ½ 5m ½ BSP Female ½ BSPT Male 50 bar 50 bar Hose Kit comprises of ; Main Hose assembly, Hose stop & metre whip hose Note: Air will leak from the air drive motor; this ia apart of the normal exhausting process for the motor and does not effect the retrscting performance of the reels. Refer to page 9 to 26 for Hose Reel dimensional drawings Page 5
Cobra Hose Reels Cobra and Lincoln Hose Stops Hose Stops prevent complete retraction of the hose while allowing overhang, this leaves the hose or attachment within reach of the operator. Cobra Hose Stops 09-COB-HS-GP 09-COB-HS-NS 09-COB-HS-NS800/2 09-COB-HS-NS800 90mm Outside Diameter Undrilled Cobra Hose Stop up to 2 I.D.for GP2000 & GPE Series Hose Reels 5mm Outside Diameter Undrilled Cobra Hose Stop up to I.D. for NS Series Hose Reels 90mm Outside Diameter 7mm Inside Diameter Drilled Cobra Hose Stop for 4" hose on NS800 Hose Reels 90mm Outside Diameter 48mm Inside Diameter Drilled Cobra Hose Stop for 2" hose on NS800 Hose Reels 09-COB-HS-NS Lincoln Drilled Hose Stops 0-08555 Drilled Hose Stop for 4 I.D. Hose 0-08556 Drilled Hose Stop for 8 ~ 2 I.D. Hose 0-08557 Drilled Hose Stop for 2 ~ 5 8 I.D. Hose 0-08422 Drilled Hose Stop for 4 I.D. Hose 0-08422 0-08557 Page 6
Gleason Cable Reels Gleason Static Electricity Discharge Cable Reels Grounding and Bonding Cables Static Discharge Reels carry cables that prevent sparks from static electricity generated by movement and flow of flammable liquids. Bonding between containers during liquid transfer and connecting drums to an earth ground are required by industries and authorities. Various clamps and terminals allow a wide variety of uses. All cables are 7 x 9 stranded steel for maximum flexibility and conductivity. Insulated cables have Safety Orange jacket. Available in several lengths - insulated or non-insulated For longer reach or Y, connect several cables with 4" terminal ends Five types of end connectors are available on request for all cables lengths and types: Hand Clamp, Aircraft Clamp, Alligator Clip, C-Clamp and Round Grounding Plug Open Spool Static Electricity Discharge Reels Ideal for a wide variety of grounding applications. Available with your choice of cable length and connector, all reels include spring rewind, centrifugal brake and ratchet lock. Cable is 7 x 7 stranded stainless steel with yellow polyester elastomer cover, 5 2" o.d. The Reel has safety orange baked polyester finish. Open Spool Features Spring Rewind with Centrifugal Brake Rugged Steel Construction Choice of Grounding Clamps and Plugs Stranded cable for maximum flexibility and conductivity Cable length up to 00' are available on request 24-OSD050-SS-YL-SG-AL Cable 24-OSD050-SS-YL-SG-AL Open Spool Static Discharge Reel with Alligator Clip 5m Enclosed Spool Static Electricity Discharge Reels Ideal for a wide variety of grounding applications, all reels include spring rewind, centrifugal brake and ratchet lock. Cable is 7 x 7stranded stainless steel. The Reel has safety orange baked polyester finish. Enclosed Spool Features Spring Rewind with Centrifugal Brake Rugged Steel Construction Stranded cable for maximum flexibility and conductivity "Y" Configuration also available 24-SD-2050 Cable 24-SD-2050 Enclosed Static Discharge Reel 5m 24-SD-2050Y Enclosed Static Discharge Reel 0.5 plus Dual 4.5m for Y 24-SD-2050N Enclosed Static Discharge Reel with Nylon covered cable 5m 24-SD-2050OS Enclosed Static Discharge Reel with Orange Nylon covered cable (meets grounding spec. of 6.67 Ohms resistance/25m cable ) 5m Refer to page 26 for dimensional drawings Page 7
Gleason Cable Reels Gleason Electrical Cable Reels To complement the range of Hose Reels JSG has also available the Gleason Cable Reel range. The cable reels allow the flow of electric current through a Slip Ring and spool. The cable reels are used in Lift, Drag, Stretch and Retrieve applications. Gleason S Series Gleason S Series reels are spring driven electric cable reels designed to be mounted on moving machinery. Electric current flows from your power source to the current consumer through the cable that you specify. S Reels utilize selfcontained slip ring assemblies which transfer current to the cable mounted on the rotating spool. Models for longer travels are fitted with gear assemblies to provide many application possibilities. Contact your nearest JSG Representative for specific application details. S Cable Reel Features Models for 4 to 6 conductors 9m to 6m for lift, drag and stretch applications 60m for retrieve applications Up to 600 volt slip ring assemblies Optional slip ring enclosures for hazardous areas Painted with baked polyester for a long-lasting, durable finish Slip Ring ratings 5, 75,25 & 200 amps. Standard is 5 & 75 amps Optional roller guide assembly S Series Cable Reel Gleason Cable-Master Series Gleason Cable-Master Reel s rugged heavy duty design has been refined over many years of field use. They have either fully automatic or ratchet controlled spring rewind and contain all the features found in any reel in this size range. Cable-Master Features Rolled cable guide Ratchet lock or easy to convert to tension reel 600 volt slip ring to 2 conductors 6m to 2m long cables Painted with baked polyester for a long-lasting, durable finish Slip Ring ratings 5 & 55 amps Standard is 5 amps Optional swivel stand Cable Master Series Other styles of Gleason Cable reels are available For further detail on the Gleason Cable Reel Range please contact your nearest JSG representative or JSG distributor Page 8
Hose Reel Dimensions Cobra & Custom Reel Manual Rewind Hose Reels 09-HW00 A 480mm B 50mm C 6mm D 280mm E 28mm F 595mm G 280mm H 6mm 09-HW400 A 480mm B 50mm C 6mm D 52mm E 400mm F 665mm G 280mm H 6mm 20-925-5F-GR A 457.2mm B 495.mm C 8.0mm D 279.4mm E 65.0mm F 508.0mm G 558.8mm H 55.6mm I 466.7mm 20-925-0C-GR2 A 558.8mm B 596.9mm C 8.0mm D 279.4mm E 65.0mm F 508.0mm G 558.8mm H 55.6mm I 466.7mm 09-HW00 09-HW400 20-920-0F-GR2 A 558.8mm B 596.9mm C 254.0mm D 279.4mm E 482.6mm F 508.0mm G 406.4mm H 229.2mm I 466.7mm 20-925-60C-GR2 A 65.0mm B 67.mm C 508.0mm D 279.4mm E 762.0mm F 508.0mm G 685.8mm H 482.6mm I 466.7mm 20-920, 925 & 940 Manual Crank Rewind Reels 20-920-60F-GS A 558.8mm B 596.9mm C 508.0mm D 279.4mm E 76.6mm F 508.0mm G 660.4mm H 48.2mm I 466.7mm 20-940-5C-GR2 A 558.8mm B 596.9mm C 254.0mm D 279.4mm E 508.0mm F 508.0mm G 4.4mm H 228.6mm I 466.7mm 20-940-0C-GS A 508.0mm B 546.mm C 762.0mm D 279.4mm E 06.0mm F 508.0mm G 99.8mm H 76.6mm I 466.7mm Page 9
Hose Reel Dimensions Cobra MP00 & GP2000 Series Spring Rewind Hose Reels Cobra MP00 Hose Reel Spring Rewind Series A B C D E F G J 80mm 0mm 200mm 50mm 40mm 40mm 0mm 8mm Cobra 09-MP00 Series Cobra GP2000 Hose Reel Series A B C D E F G H J 282mm 200mm 8mm 22mm 275mm 42mm 262mm 700mm mm Dia. J Holes Cobra 09-GP2000 Series Page 20
Hose Reel Dimensions Cobra GPE & NS200 Series Spring Rewind Hose Reels Cobra GPE Hose Reel Spring Rewind Series A B C D E F G J 245mm 0mm 275mm 40mm 52mm 297mm Dia. 462mm Dia. mm Dia. J Holes Cobra 09-GPE Series Cobra NS200 Hose Reel Spring Rewind Series A B C D E F G J 250mm 250mm 40mm 280mm 270mm 560mm 285mm Dia. mm Dia. J Holes 09-NS-200 Series Page 2
Hose Reel Dimensions Cobra NS600 - NS800 Spring Rewind Series Hose Reels NS600-AWL-5/2 A 250mm B 275mm C 40mm D 05mm E 65mm F 585mm G 285mm H 505mm J mm NS800-HD-LDF-5/6 A 70mm B 275mm C 462mm D 405mm E 40mm F 660mm G 40mm H 605mm J mm NS600-AWL-0/08 A 70mm B 275mm C 462mm D 05mm E 75mm F 585mm G 285mm H 505mm J mm NS000-LDF-25/6 A 70mm B 75mm C 462mm D 405mm E 470mm F 660mm G 40mm H 605mm J mm NS600-HPG-25/06 A 70mm B 275mm C 462mm D 05mm E 75mm F 585mm G 285mm H 505mm J mm NS800-LDF-5/24 A 70mm B 77mm C 462mm D 405mm E 502mm F 747mm G 42mm H 750mm J mm Dia. J Holes 09-NS600 ~ 09-NS800 Series NS800-LDF-5/6 A B C D E F G H J 250mm 275mm 40mm 05mm 65mm 660mm 40mm 605mm mm Page 22
Hose Reel Dimensions Cobra NS600 to NS800 Direct Hydraulic Drive Hose Reels NS600-HML-0/08 A 44.60 B 582.9 C 287.00 D 57.50 E 582.9 F 0.00 G 500.00 H 44.00 I 250.00 J 276.00 K 05.00 NS600 -HMG-25/06 A 445.60 B 604.00 C 285.00 D 57.50 E 604.00 F 0.00 G 500.00 H 44.00 I 250.00 J 276.00 K 05.00 NS800-HML-5_24 A 550.50 B 800.00 C 42.00 D 20.00 E 800.00 F 0.00 G 754.00 H 406.00 I 70.00 J 75.00 K 405.88 Page 2
Hose Reel Dimensions Cobra NS600 to NS800 Direct Air Drive Hose Reels NS600-AMBG-25/06 A 250.00 B 276.00 C 44.00 D 05.00 E 47.00 F 580.00 G 287.00 H 500.00 NS600-AMBL-0/08 A 250.00 B 276.00 C 44.00 D 05.00 E 47.00 F 580.00 G 287.00 H 500.00 NS800-AMBL-5/6 A 70.00 B 275.00 C 462.00 D 405.00 E 475.00 F 660.00 G 40.00 H 605.00 Page 24
Hose Reel Dimensions Cobra NS000 to NS800 Direct Air Drive Hose Reels NS000-AMBL-5/6 A 70.00 B 75.00 C 462.00 D 405.00 E 475.00 F 664.00 G 7.00 H 605.00 NS800-AMBL-5/6 A 70.00 B 75.00 C 466.00 D 405.00 E 486.00 F 750.00 G 42.00 H 744.00 Page 25
Hose Reel Dimensions Gleason Static Discharge Cable Reel Dimensions Gleason Open Static Discharge Cable Reel A B C D E F G H I J K 24mm 229mm 95mm 200mm 20mm 24mm mm 8mm 4mm mm dia. two holes 0mm dia. four holes 24-SD-2050 Series Gleason Enclosed Static Discharge Cable Reel A B C D E 224mm 200mm 29mm 8mm 85mm 24-0S050-SS-YL-SG-AL Page 26
JSG Industrial Product Range Fast Fill Systems Exhaust/Fume & Extraction Systems Lincoln PMV Pump & Accessories Fire Suppression Products Flowmeter Products Diaphragm Pump Products On-Board Weighing Systems Industrial Lubrication Equipment Muster Fire Extinguisher To find out more information on all of our product ranges please go to www.jsgindustrial.com or contact your local sales representative Page 27
Sydney Unit, 2 Amour St Revesby NSW 222 PO Box Milperra NSW 224 Ph: (02) 994 8720 Email: jsgindustrial@jsg.com.au Melbourne /62-68 Garden Drive Tullamarine VIC 04 Ph: (0) 8809 00 Email: jsgvic@jsg.com.au Perth 2 Holder Way Malaga WA 6090 Ph: (08) 6240 5800 Email: jsgwa@jsg.com.au Brisbane Unit /20 Lancashire St Acacia Ridge QLD 40 Ph: (07) 27 4 Email: jsgqld@jsg.com.au Adelaide Suite 7, 8 Greenhill Rd Wayville SA 504 Ph: (08) 872 950 Email: jsgsa@jsg.com.au Cessnock Level /426 Macdonalds Rd Pokolbin NSW 225 Ph: 0447 277 755 Email: jsghv@jsg.com.au Townsville Level, /5 Woolcock St Hyde Park Townsville QLD 480 Ph: 049 02 892 Email: jsgfnq@jsg.com.au Mackay C0 26 Harbour Rd Mackay QLD 4740 Ph: (07) 4944 0588 Email: techcq@jsg.com.au Indonesia PT JSG International Jl. Ciputat Raya, No. C RT.00/RW. 00 Kebayoran Lama Selatan, Kebayoran Lama, Jakarta Selatan 2240 Ph: (62-2) 729 5 Email: sales@ptjsg.co.id Your authorised JSG distributor: Lubrication Management Systems Material Dispensing Management Systems Hose & Cable Management Systems Diesel & Fluid Management Systems Fire Extinguisher & Suppression Systems Onboard Weighing & CCTV Systems Flow Measurement Systems General Lubrication & Exhaust Extraction Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this publication and Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information. 20 Pty Ltd., All rights reserved. Unit, 2 Amour St Revesby 222 Australia T: +6 2 994 8720 F: +6 2 994 8798 E: jsgindustrial@jsg.com.au W: www.jsgindustrial.com HR04