Victory Series TM Buccal Tubes Designed for Comfort and Performance Advanced, Precise Solutions for Molars
Victory Series TM Buccal Tubes Victory Series TM First Molar Buccal Tubes These buccal tubes are designed to receive the archwire on the first try and reduce occlusal interference. The radiused hook is designed for both comfort and practical function, just as the tubes are contoured for patient comfort. Convertible tubes have a patented metal-injection-molded convertible cap for consistent, reliable conversion. They provide ample space under the tie wings for effective ligature tying. Integral convertible cap Nonconvertible tubes have a smooth rounded hook, and contoured design, assuring greater patient comfort. Seating and gripping notches, distal notches and an expanded mesial funnel entry make placement, ligation and archwire insertions easier. Upper Convertible Single Lower Non-Convertible Single Upper Convertible Triple Combination Occlusal Headgear Tube
Victory Series TM Second Molar Buccal Tubes Victory Series Upper Second Molar Tubes address treatment issues that arise due to balancing and lingual cusp interference during the finishing stages of treatment. And the new funneled design helps ease archwire insertion. The positioning and seating notches are there for better control. This tube offers ample space in the distal notch for wire crimping. Side Gripping Notches Notch for easy placement of ligatures Seating Notch Radiused Hook Funneled Entry Way The Victory Series TM Mini Tube The Victory Series Mini Tube is an ideal solution for dealing with partially erupted second molars. These tubes have a mesially-extended, compound contoured, micro-etched bonding base that allows for superior fit and bond strength. No other mini tube offers 3M Unitek s combination of advanced hook design, precise base fit, and seating notch. Seating notch Victory Series TM 2nd Bicuspid Tubes The design of the Victory Series 2nd Bicuspid Tube eliminates occlusal tie-wings, which can cause occlusal interference and its potential for bond failures. With the use of the tube rather than a slot, the need for ligatures has been eliminated as well. No ligatures means reduced friction on the archwire, providing enhanced posterior sliding mechanics. Together, the design features of Victory Series 2nd Bicuspid Tubes make treatment more efficient and predictable. There are advantages for the patient, too. The smooth radiused design improves patient comfort and facilitates better hygiene. No tie-wings to come into occlusion Ligature wire channel (patent pending) Chamfered tube opening to assist in wire insertion Micro-Etched base with offset option
Victory Series TM Molar Bonding Bases You can achieve a stronger, more consistent bond in every case with the Victory Series Molar Bonding Base. Look closely at its profile and you ll see a curved anatomical design for optimal tube-to-tooth fit and a buccal indent that naturally conforms to the surface of the molar, making it easier to correctly position the buccal tube in place. The micro-etched 80 gauge mesh, along with the buccal indent and the correct anatomical fit, are designed for increased bond strength. The buccal indent assists in more accurate tube positioning; a key advantage that can eliminate time consuming archwire adjustments. And with the Victory Series molar bonding base, you ll never have to worry about tooth separation for band placement. The APC Adhesive Coated Appliance System...is the fastest, most convenient and efficient method you can use for direct bonwwportant factor in keeping a practice and its schedule stress-free. The APC system not only reduces bonding variables that contribute to bond failure, but goes above and beyond by simplifying the set-up procedure as well as providing an inventory framework that is easy to control and manage. Prewelding Our patented welding process uses the latest technology to ensure accurate, consistent welds. Monitoring of the electrical current during welding allows us to know the weld strength of every single weld, instead of testing samples from a group of welds, reducing the chance for variability or weak weld strength within a certain batch. Separate to prewelding, the bands themselves have unique features: Straight interproximal walls for reduced tooth separation Reduced gingival/occusal dimensions to reduce the occurrence of interference Increased occlusal edge strength for reduced deformation
Your reliable molar appliance solution Victory Series TM Buccal Tubes provide you with a well-designed, reliable and predictable orthodontic solution, offering a better experience both chairside and in treatment. Metal-injection molded for dimension consistency and rounded surfaces, the tubes have a contoured shape and hook designed for both practicality and comfort. Funneled features allow for easier mesial wire insertion, and deep distal notch provides more effective wire crimping. Multiple torque and angulation options meet the varied treatment needs of different patients.
Victory Series TM Upper First Molar Buccal Tubes Arch 4) Headgear UL UR UL UR APC 1) Rx Forsus 2) Convertible Single -14 10 3,6 068-897 3) 5) 068-898 3) 5) 068-997 3) 5) 068-998 3) 5) X MBT TM 0 0 3,6 067-808 3) 067-807 3) 067-908 3) 067-907 3) X 0 6 3,6 067-810 3) 067-809 3) 067-910 3) 067-909 3) X -10 7 4,3 068-823 3) 5) 068-824 3) 5) 068-923 3) 5) 068-924 3) 5) X Non-Convertible Single - Funneled -14 10 4,6 067-879 3) 5) 067-878 3) 5) 067-979 3) 5) 067-978 3) 5) X MBT TM Convertible Double 0 0 3,6 068-849 3) 068-850 3) 068-949 3) 068-950 3) X -10 7 3,6 068-851 3) 068-852 3) 068-951 3) 068-952 3) X Convertible Double - Differentiated Slot 0 0 3,6 068-953 068-954 Convertible Double Combination 0 0.045 3,6 068-841 068-842 068-941 068-942 X 0 0.051 3,6 068-843 068-844 068-943 068-944 X 0 7.045 4,3 068-801 068-802 068-901 068-902 Roth X 0 7.051 4,3 068-803 068-804 068-903 068-904 X 0 7.045 3,6 068-875 068-874 068-975 068-974 X -10 7.045 4,3 068-805 068-806 068-905 068-906 Roth X -10 7.051 4,3 068-807 068-808 068-907 068-908 X -10 7.045 3,6 068-871 068-870 068-971 068-970 X -10 7.051 3,6 068-873 068-872 068-973 068-972 X -10 14.045 4,3 068-809 068-810 068-909 068-910 X -10 14.051 4,3 068-811 068-812 068-911 068-912 X -10 14.045 3,6 068-879 068-878 068-979 068-978 X -10 14.051 3,6 068-881 068-880 068-981 068-980 X Convertible Double Combination - Occlusal Headgear Tube -14 10.045 4,6 068-893 068-894 068-993 068-994 MBT TM X -14 10.051 4,6 068-895 068-896 068-995 068-996 MBT TM X Non-Convertible Double Combination 0 0 4,3 067-843 067-943 0 0.045 5.1 068-861 068-862 068-961 068-962 0 0.051 5.1 068-863 068-864 068-963 068-964 0 6.045 5.1 068-865 068-866 068-965 068-966 0 6.051 5.1 068-867 068-868 068-967 068-968 Convertible Double Combination With Gingival Headgear Tube -10 7.045 4,3 068-821 068-822 068-921 068-922 -14 10.045 4,3 068-885 068-886 068-985 068-986 MBT TM -14 10.051 4,3 068-887 068-888 068-987 068-988 MBT TM Convertible Triple Combination - Occlusal Headgear Tube 0 0.045 3,6 068-845 068-846 068-945 068-946 X 0 0.051 3,6 068-847 068-848 068-947 068-948 X 0 15.045 4,0 068-825 068-826 X -10 7.045 3,6 068-813 068-814 068-913 068-914 X -10 7.051 3,6 068-815 068-816 068-915 068-916 X -10 14.045 3,6 068-817 068-818 068-917 068-918 X -10 14.051 3,6 068-819 068-820 068-919 068-920 X -14 10.045 4,3 068-889 068-890 068-989 068-990 MBT TM X -14 10.051 4,3 068-891 068-892 068-991 068-992 MBT TM X
Arch 4) Headgear UL UR UL UR APC 1) Rx Forsus 2) Convertible Triple Combination - Differentiated Slot -10 14.045 3,6 068-853 068-854 X -10 7.045 3,6 068-959 068-960 X 0 0.045 3,6 068-957 068-958 X Non-Convertible Triple Combination 0 0.045 4,3 068-882 068-982 X 0 0.051 4,3 068-883 068-983 X 0 0.045 4,3 068-601 068-602 Ricketts X 1) Please use the Prefix 3 for APC II Adhesive Coated Appliance System (e.g. 3068-897) Please use the Prefix 5 for APC PLUS Adhesive Coated Appliance System (e.g. 5068-897) 2) Compatible with the Forsus Fatigue Resistant Device EZ2 Module & L-Pin Module 3) Please use the Suffix 1 for bondable base for Left Uppers (e.g. 068-8971) Please use the Suffix 2 for bondable base for Right Uppers (e.g. 068-8972) 4) Slot Torque, Aux = 0 if relevant 5) Please use an additional Suffix 8 for a big base option (e.g.: 068-89718), Victory Series TM Lower First Molar Buccal Tubes Arch 4) Lip Bumper LL LR LL LR APC 1) Rx Base 2) Remarks Convertible Single 0 0 3,6 067-807 067-808 067-907 067-908 X X 0 6 3,6 067-809 067-810 067-909 067-910 X Roth X -10 0 4,3 067-813 067-814 067-913 067-914 X X -25 6 3,6 067-851 067-850 067-951 067-950 X X -25 6 4,3 067-801 067-802 067-901 067-902 X Roth X -20 0 4,3 067-819 067-820 067-919 067-920 X MBT TM X 3) -20 0 4,3 067-520 067-521 067-620 067-621 X MBT TM X 3) Low Profile -25 0 4,3 067-817 067-818 067-917 067-918 X X Non-Convertible Single -20 0 4,6 067-877 067-876 067-977 067-976 X MBT TM X 3) Funneled -20 0 4,3 067-867 067-868 067-967 067-968 X MBT TM X Convertible Double Combination 0 0 3,6 068-850 068-849 068-950 068-949 X X -25 7 3,6 067-803 067-804 067-903 067-904 X X -20 0 4,3 067-861 067-860 067-961 067-960 X MBT TM X Convertible Double - Differentiated Slot 0 0 3,6 068-954 068-953 -25 7 3,6 067-955 067-956 Lip Bumper Convertible Double -25 5 0.45 4,3 061-251 061-252 061-351 061-352 Lip Bumper Convertible Triple -25 5 0.45 4,3 067-811 067-812 067-911 067-912 Non-Convertible Double 0 0 4,3 067-843 067-943 Ricketts 1) Please use the Prefix 3 for APC II Adhesive Coated Appliance System (e.g. 3067-807) Please use the Prefix 5 for APC PLUS Adhesive Coated Appliance System (e.g. 5067-807) 2) Please use the Suffix 3 for bondable base for Left Lowers (e.g. 067-9073) Please use the Suffix 4 for bondable base for Right Lowers (e.g. 067-9084) 3) Please use an additional Suffix 8 for the big base option (e.g. 067-90738) 4) Slot Torque, Aux = 0 if relevant
Victory Series TM Upper Second Molar Buccal Tubes 3,6 mm 3,6 mm Arch UL UR UL UR APC 1) Rx Base 2) Remarks Non-Convertible Single with Notch 0 0 3,6 067-825 067-826 067-925 067-926 X Ricketts X 0 0 5,1 067-844 067-845 067-944 067-945 With hook 0 6 3,6 067-827 067-828 067-927 067-928 X Roth X 0 6 5,1 067-846 067-847 067-946 067-947 With hook -10 6 3,6 067-829 067-830 067-929 067-930 X Roth X -10 10 3,6 067-831 067-832 067-931 067-932 X X -14 10 4,3 067-857 067-858 067-957 067-958 X MBT TM X -19 8 3,9 067-873 067-872 067-973 067-972 X MBT TM X Funneled 1) Please use the Prefix 3 for APC II Adhesive Coated Appliance System (e.g. 3067-807) Please use the Prefix 5 for APC PLUS Adhesive Coated Appliance System (e.g. 5067-807) 2) Please use the Suffix 1 for bondable base for Left Uppers (e.g. 067-8251) Please use the Suffix 2 for bondable base for Right Uppers (e.g. 067-8252) Victory Series TM Lower Second Molar Buccal Tubes Arch LL LR LL LR APC 1) Rx Base 2) Remarks Non-Convertible Single with Notch 0 0 3,6 067-826 067-825 067-926 067-925 X Ricketts X 0 6 3,6 067-828 067-827 067-928 067-927 X Roth X 0 0 5,1 067-845 067-844 067-945 067-944 With hook 0 6 5,1 067-847 067-846 067-947 067-946 With hook -10 0 3,6 067-536 067-537 067-636 067-637 X MBT TM X Funneled -10 0 4,3 067-816 067-815 067-916 067-915 X MBT TM X -25 6 3,6 067-538 067-539 067-638 067-639 X X Funneled -25 6 3,6 067-837 067-838 067-937 067-938 X X -25 10 3,6 067-839 067-840 067-939 067-940 X X -30 6 3,6 067-835 067-836 067-935 067-936 X X 1) Please use the Prefix 3 for APC II Adhesive Coated Appliance System (e.g. 3067-816) Please use the Prefix 5 for APC PLUS Adhesive Coated Appliance System (e.g. 5067-816) 2) Please use the Suffix 3 for bondable base for Left Lowers (e.g. 067-8163) Please use the Suffix 4 for bondable base for Right Lowers (e.g. 067-8164) Victory Series TM Mini Tubes Arch L R L R APC 1) Rx Base Remarks Upper 0 0 2,5 066-4101 066-4092 066-5101 066-5092 X X Only direct bond -10 0 2,5 066-4121 066-4112 066-5121 066-5112 X X Only direct bond -14 0 2,5 066-4071 066-4082 066-5071 066-5082 X MBT TM X Only direct bond Lower 0 0 2,5 066-4013 066-4024 066-5013 066-5024 X X Only direct bond -10 0 2,5 066-4033 066-4044 066-5033 066-5044 X MBT TM X Only direct bond -25 0 2,5 066-4053 066-4064 066-5053 066-5064 X X Only direct bond Victory Series TM 2nd Bicuspid Tubes Arch Angulation L R L R APC 1) Rx Base 2) Remarks Upper -7 0 058-803 058-903 X MBT TM X Lower -17 2 058-801 058-802 058-901 058-902 X MBT TM X 1) Please use the Prefix 3 for APC II Adhesive Coated Appliance System (e.g. 3058-803) Please use the Prefix 5 for APC PLUS Adhesive Coated Appliance System (e.g. 5058-803) 2) Please use the Suffix 0 for an offet base option (e.g. 058-8030) 3M Unitek EMEA Headquarter Ohmstr. 3 86899 Landsberg / Germany www.3munitek.net For additional information please contact your local representative. APC, MBT, Forsus and Victory Series are trademarks of 3M. Please recycle. 2010 3M. All rights reserved. 016-966 EMEA 1003